San Antonio, TX • (29.7 miles) • Full Time • 10/30/2026

Under minimal supervision, conducts preventive maintenance, repair, installation, commissioning and general servicing of systems. Performs point to point check out to verify that controls systems have been installed properly. Completes assigned system commissioning and performs device verification. Properly completes required project documentation. Responsible for high levels of customer satisfaction through direct, on site, customer interface. Properly completes required project and service documentation. A key member of the Albireo team, the System Specialist will be responsible for providing the execution for Building Automation projects, to include: Performs start up, checking, testing, system diagnostics and commissioning from system-level controllers to end devices for small to mediu

San Antonio, TX • (29.7 miles) • Full Time • $25.00 to $35.00 / hr • 10/30/2026

JOB SUMMARY: The Equipment Shop Technician II will be responsible for performing work involving the diagnosis and repair of malfunctions, as well as preventative maintenance tasks, for diesel engines and construction equipment, in addition to hydraulic and electrical systems. Experience with mechanics on heavy equipment or diesel applications. Minimum of three years’ experience required. TYPICAL DUTIES: Inspect diesel engine and equipment hydraulic and electrical systems to determine needs for repair or replacement of parts. Operate vehicles and heavy equipment to aid in the diagnostic and repair process. Repair or adjust parts that do not work properly and replace parts that cannot be fixed. Dismantle, reassemble, test, clean, and adjust repaired or replaced parts or assemblies to ensure

San Antonio, TX 78205-2002 • (29.7 miles) • Full Time • 10/30/2026

Description: TITLE: Quality Control Scientist III REPORTS TO: Manager, Quality Control LOCATION: San Antonio, Texas (Onsite) Note: This position has a July 2026 start date. The Company Velocity Bioworks is a U.S.-based biopharma CDMO headquartered in San Antonio, Texas supporting funded programs as they move from development into manufacturing for clinical trials. We collaborate with sponsors who are past exploration and are ready to apply discipline, structure, and technical rigor to development, analytics, and manufacturing. Velocity is built to accelerate speed to clinic through aligned execution. Our work focuses on translating defined program goals into scalable manufacturing processes and robust analytical strategies. These activities are designed to support near-term clinical timeli

San Antonio, TX 78223 • (39.7 miles) • Full Time • $80,000 to $90,000 / yr • 10/30/2026

Electrical Engineer Location: San Antonio, TX, on-site Monday to Friday Status: Direct hire Experience level: 5+ years of total experience and a Bachelors degree in Electrical Engineering SUMMARY: Candidate will design, develop, integrate, and support electromechanical systems for detention and correctional facilities. Responsibilities include working with high- and low-voltage electrical systems, motor controls, electronic security systems, and control system integration. Responsibilities Design electrical/electronic control systems using AutoCAD and other electronics control system configuration software. Validate existing electrical designs and specifications. Standardize legacy electrical schematics across multiple product brands. Determine system specifications for submittal and appro

San Antonio, TX 78221 • (41.9 miles) • Full Time • 10/30/2026

Job Title: Sr Lead Manufacturing Engineer Location: San Antonio TX 78221 Duration: Contract 12 Months (Possibilities to extend) Job Description Client is seeking a Process Engineer to join our team at our Manufacturing Facility in San Antonio, Texas! This facility has the flexibility to build Class 6-7 trucks and is currently expanding to a 2nd shift. These positions will be used to bolster 1st Shift while experienced team members train and launch the new shift. The Process Engineer is responsible for supporting daily operations by responding to defects and downtime found during the shift. Engineers manage a Top 10 list of priorities for their customer focusing efforts on balance, standardization, visualization, and elimination of downtime and defects. Project priorities for our Engineers

San Antonio, TX • (29.7 miles) • Full Time • 10/28/2026

Class A CDL Test Drivers – New Braunfels / San Antonio, TX SkySys is now hiring experienced Class A CDL Drivers for an exciting vehicle test-driving project in the New Braunfels / San Antonio, TX area. Position Details Position: Class A CDL Test Driver Location: New Braunfels / San Antonio, TX Start Date: Mid-August 2026 Employment Type: Hourly Contract Duration: Initial 3-month assignment with the potential to extend up to 1 year Schedule Monday – Friday 8:00 AM – 5:00 PM Overtime, weekends, and holidays may be required based on project needs. Compensation $30.00 – $32.00 per hour , depending on experience Requirements Valid Class A CDL Clean driving record Previous commercial driving experience preferred Ability to work overtime and a flexible schedule when needed Must be authorized to w

San Antonio, TX 78228 • (30.8 miles) • Full Time • $18.00 to $28.00 / hr • 10/27/2026

Job Posting: CAD/CAM Milling Department Manager Job Description Authentic Dental Lab, a respected leader in the dental prosthesis manufacturing industry based in San Antonio, TX, is excited to announce a new opening for a full-time CAD/CAM Milling Department Manager. This key position is integral to our operations and requires a dedicated professional eager to contribute to our longstanding tradition of excellence. This role is on-site and is not eligible for remote work. As the manager of the CAD/CAM milling department, you will oversee the efficient and precise production of dental restorations, ensuring each piece meets our high-quality standards. The successful candidate will lead a team of skilled technicians, driving process improvements and technological integrations that enhance ou

San Antonio, TX 78205 • (32.2 miles) • Full Time • 10/27/2026

If you are a successful chemical or industrial supply sales professional looking for an excellent income and career growth opportunity, here’s your chance to join a large North American raw material chemical & materials supplier. Our client is looking for a high-energy “hunter” who is also an excellent account manager to fill a home-based sales position, ideally located in the San Antonio/Austin area. Overnight travel is expected to be ~25%. Responsibilities: Sell a broad range of raw material chemicals & materials to the Composites manufacturing markets in the South Texas Region (Waco to Brownsville to Corpus Christi to El Paso). Most of the business will be in the San Antonio/Austin area. Products include Gel Coats, Resins, Epoxies, Adhesives, Initiators, Core Materials, Reinforcements,

San Antonio, TX • (29.7 miles) • Full Time • $20.00 to $26.00 / hr • 10/26/2026

American Air Conditioning & Heating is looking for experienced Commercial Sheet Metal Mechanics / HVAC Duct Installers to join our commercial HVAC team. We have multiple active projects throughout the San Antonio and Austin areas and are looking for dependable installers who know the trade, have their own basic tools, and can work without constant supervision. This is not an entry-level position . We need people who understand commercial HVAC duct installation and can look at a set of plans, understand what needs to be installed, and get the work completed correctly. Responsibilities Install commercial HVAC ductwork including rectangular, spiral, round, flex duct, diffusers, grilles, and related accessories. Read and understand mechanical plans and duct layouts. Properly hang, support, sea

San Antonio, TX • (29.7 miles) • Full Time • $55.00 to $67.00 / hr • 10/26/2026

Interim Controller – Manufacturing Immediate Need | Interim/Contract Opportunity Are you the type of Controller who can walk into an accounting department, quickly identify what needs attention, and get things back on track? We are seeking an experienced Interim Controller for a manufacturing company. This role requires a hands-on accounting leader who understands the complexities of a manufacturing environment and is comfortable stepping into an existing operation to clean up, fine-tune, and improve accounting processes . This is not a “maintain the status quo” assignment. We need someone who can assess current processes, roll up their sleeves, identify gaps, and help create a stronger and more efficient accounting function. What You’ll Be Doing Lead day-to-day accounting and financial op

San Antonio, TX 78204 • (33.7 miles) • Full Time • 10/25/2026

Description: Job Purpose The Electrical Engineer will have overall responsibilities for the electrical design on a project. The position will collaborate and direct other electrical staff during the design and documentation of the electrical system. The position will coordinate the electrical design with all other disciplines so that the design is completely coordinated internally as well as with external clients. Duties and Responsibilities The primary duties and responsibilities of this position include the following: Prepare design documents appropriate for the project and in accordance with company standards. Monitor project status and development to meet project deadlines Coordinate the completion of the documents in the appropriate time to have a QA/QC review completed prior to the d

San Antonio, TX 78221 • (41.9 miles) • Full Time • $28.00 to $45.09 / hr • 10/25/2026

Job Title: Electronics Technician Location: 100% travel throughout the United States Type: 6-month contract to hire Compensation: $28 - $40/hr. Additional "Health & Wellness" rate: $5.09/hr (paid in addition to their hourly pay rate for the 1st 40 hours worked each week) Work Model: Remote – offsite Hours: 40 hours per week, Monday - Friday, 7:00 AM – 4:00 PM (approximately) Security Clearance: Must meet customer security requirements Overview System One is seeking traveling Electronics Technicians to support the installation, maintenance, troubleshooting, and repair of FAA electronic systems, including navigation aids, communications equipment, surveillance systems, and associated power and control infrastructure. The technician works from technical drawings, schematics, and FAA procedure

San Antonio, TX • (29.7 miles) • Full Time • 10/24/2026

Description: Job Title: Lead Manufacturing Engineer Department: Manufacturing Engineering (ME) Reports To: Plant Mgr. (solid line) and dotted line to ME Mgr for functional direction. Status: Exempt Direct Reports: Staff Manufacturing Engineer, and Interns Job Type: Onsite full time Job Summary : The Senior Engineer will support the Continuous Improvement/ME department through the creation, and maintenance of engineering systems. The Senior Engineer is expected to apply concepts and practices focused on Lean/Six Sigma to improve the overall efficiency and effectiveness of Reyes Automotive Group’s manufacturing operations. Main Duties and Responsibilities (Other duties may be assigned) · Support the Plant Manager and Continuous Improvement team with daily tasks. · Implement Lean Manufacturin

San Antonio, TX 78205 • (32.2 miles) • Full Time • 10/24/2026

WHAT WE DO: Founded in 1956, Dunaway is a multidisciplinary professional services firm offering Survey, Civil and Structural Engineering, Planning + Landscape Architecture, and Construction Inspection Services (CIS), in addition to Environmental and Geographic Information Systems (GIS), SUE (Subsurface Utility Engineering), and ROW (Right-of-Way) services. For over seventy years, Dunaway has been a trusted client advisor, committed to improving lives in the communities we serve. Supported by a team of 370+ professionals with eight offices across Texas, including Fort Worth, Dallas, Austin, San Antonio, Farmersville, Houston, and Midland. WHO WE ARE: The Dunaway Difference is our three foundational components (represented by the waves in our logo): Core Values, One Heart and Profitable Grow

San Antonio, TX 78205 • (32.2 miles) • Full Time • $140,000 to $150,000 / yr • 10/24/2026

Position Summary Commitment to leading a mission critical environment that values continuous improvements. This position manages the installation and maintenance of mechanical systems at Data Centers and operations of specialized cooling systems. Acts as an Engineering resource for the complete H5 portfolio of mission critical facilities. Plans and monitors Building Management Systems and mechanical measurements. Maintains design documentation. Provides full life-cycle support to H5 Data Centers from concept design through site implementation and operations. This position reports to the Senior Vice President. Essential Job Functions Participate in all aspects of mechanical design and engineering including development of basis of design, scope of work, implementation processes and commissio

San Antonio, TX 78205 • (32.2 miles) • Full Time • $80,000 to $120,000 / yr • 10/24/2026

About Sungrow: Sungrow North America is a leading provider of renewable energy solutions, specializing in the development and manufacturing of photovoltaic inverters and energy storage systems. The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment to innovation, high-quality standards, and exceptional customer service, aiming to provide sustainable and reliable energy solutions to meet the growing demand for clean power. The Position: The Electrical Engineer position is a hybrid or Onsite position depending on the department requirement, and it plays an important role with this rapidly growing company. This is a very dynamic and fast-track position

San Antonio, TX 78261 • (13.3 miles) • Full Time • 10/24/2026

Benefits: Company parties Bonus based on performance Competitive salary Flexible schedule Free uniforms Opportunity for advancement Training & development Benefits: Flexible hours that allow for work-life balance. Weekends may be required. Competitive pay, with the opportunity to earn bonus and tips Opportunities for advancement within the company A positive and respectful company culture that values teamwork and individual contributions Maid Right is currently seeking a Lead Cleaner /trainer and QC to join our team. As a Lead Cleaner, you will be responsible for cleaning residential and light commercial properties, as well as leading cleaning teams. Our work schedule is Monday through Friday, 8am to 6pm, with sometimes evening and weekends hours unless requested. As the Lead Cleaner, you

San Antonio, TX 78232 • (20.9 miles) • Full Time • 10/24/2026

About Us McMillan James Equipment Company (MJEC) is a manufacturers’ representative offering commercial HVAC, plumbing, hydronics, and controls equipment plus expert service, start-up support, and a complete range of OEM and aftermarket parts across Texas and beyond. We tackle complex challenges with creative solutions, always guided by honesty, integrity, and transparency because doing what’s right matters, even when it’s not the easiest path. The Opportunity We’re always interested in connecting with talented professionals in Building Automation and Controls. Whether you’re an experienced technician, programmer, or project specialist, we’d love to learn more about your background for future openings within our Building Automation team. Possible Roles May Include: BAS Field Technicians (L

San Antonio, TX • (29.7 miles) • Full Time • 10/24/2026

Quality Control Technicians needed in the San Antonio area. Candidates must have prior quality control experience and a string work ethic. Competitive pay and various shift availabilities. Candidates will have to interview

Boerne, TX 78015 • (17.1 miles) • Full Time • $120,000 to $140,000 / yr • 10/23/2026

Summary We are seeking a Maintenance Manager, Refrigeration to oversee the safe operation, management, and maintenance of an Ammonia Refrigeration System and other mechanical counterparts. This role requires expertise in industrial/building maintenance, preventive maintenance planning, process safety management, and capital budgeting. The ideal candidate will have experience in high-volume food or beverage manufacturing and be proficient in refrigeration maintenance, troubleshooting, and team supervision. Education & Experience Bachelor’s degree in Mechanical Engineering (ME), Electrical Engineering (EE), or Professional Engineer (PE) certification; or equivalent work experience. 5+ years of experience in a high-volume manufacturing environment, preferably in the food or beverage industry.

San Antonio, TX • (29.7 miles) • Full Time • 10/23/2026

Title: Director of Automation Location: San Antonio, TX (On-site) Employment Type: Full-time Department: Operations Reports To: Vice President of Operations Position Summary: The Director of Automation will provide strategic and operational leadership to the Operations team, collaborating closely with Maintenance, Quality, and IT to enhance manufacturing processes, implement automation strategies, and drive continuous improvements across the organization. This role combines hands-on technical expertise with leadership, mentoring, and project oversight responsibilities. Education and Experience Requirements: Bachelor’s degree in Engineering (Electrical, Mechanical, Industrial, Manufacturing, Controls, Computer, or related field). Minimum of 10 years of experience in instrumentation and cont

San Antonio, TX • (29.7 miles) • Full Time • $25.00 to $30.00 / hr • 10/23/2026

Electronics Technician Location: San Antonio, TX Experience Required: 5+ Years Job Summary We are seeking an experienced Electronics Technician to support electronics assembly, testing, troubleshooting, and installation activities. The ideal candidate has hands-on experience working with electronic components, wiring, soldering, and technical schematics. Responsibilities Assemble, install, and test electronic components and equipment. Perform wire and cable assembly, soldering, and mechanical component placement. Troubleshoot and repair electronic assemblies as needed. Read and interpret electrical schematics, engineering drawings, and technical procedures. Support field-site installations and testing activities. Document work progress and provide daily status updates. Transport materials

San Antonio, TX 78238 • (31.2 miles) • Full Time • 10/23/2026

Industrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in Texas or Arkansas . PositionOverview The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including: Acoustic emission tests to assess the integrity of the fiberglass and steel structure Magnetic particle inspections to identify surface cracks on ferrous metals Torque test all critical fasteners, among others. Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control

Seguin, TX 78155 • (37.4 miles) • Full Time • 10/23/2026

Join Our Team! Job Title: Plastics Molding/Injection Reports to: Production Manager FLSA Status: Non-Exempt Shift: Mid, 1p-9:30p Department: Production Prepared by: Human Resources Approved By: Plant Manager Premium Waters, Inc. is a growing company in a growing industry and is proud to offer an outstanding lineup of great-tasting, healthy, clean drinking water including Chippewa Springs, Glacier Clear, Glenwood-Inglewood Spring Water, Kandiyohi Premium Water, Nature’s Crystal Spring Water, Nicolet Natural Water and Water Joe. Whether it is through one of our popular brands of water or our private label services, we are committed to providing the highest quality product and becoming the number one bottle water company in the industry. Qualifications: High school diploma or GED. Minimum of

San Antonio, TX 78249 • (25 miles) • Full Time • $20.00 to $25.00 / hr • 10/22/2026

Benefits: 401(k) matching Competitive salary Health insurance Paid time off The Production Finishing Specialist is responsible for the finishing and completion of projects in the center. This Production Finishing Specialist also sometimes includes the staging/preparation of completed jobs to be delivered or shipped to our client’s final destination. BENEFITS/PERKS: Competitive Compensation Flexible Scheduling Hard work, collaboration, humanity, fun, and laughter Career path development COMPANY OVERVIEW: As an established leader in the Printing, Marketing, and Design industry, our mission is to partner with customers from local small businesses to Fortune 500 organizations and provide them with the tools and expertise needed to grow their businesses. Our tight-knit team, AlphaGraphics - US7

Cibolo, TX 78108 • (24.4 miles) • Full Time • 10/22/2026

INDUSTRY: Ready-Mix Concrete | Construction Materials LOCATION: San Antonio, Texas CONTEXT: Our clientis seeking a Director of Quality Assurance & Quality Control (QA/QC) for a growing ready-mix concrete company. Reporting to the Vice President of Operations, this leader will oversee quality programs, mix design optimization, raw materials, and technical teams across fixed and portable operations. The ideal candidate combines strong concrete expertise with business acumenimproving product performance, reducing material costs, and advancing sustainable concrete solutions. RESPONSIBILITIES: Lead and develop the QA/QC team, establishing consistent testing, training, documentation, and quality standards across locations. Develop and optimize concrete mix designs to improve strength, durability

San Antonio, TX • (29.7 miles) • Full Time • 10/22/2026

Our client is seeking a Civil Engineer with 8 or more years of experience in stormwater related planning and design for public entities. The primary focus of this position includes leading the technical aspects of projects including hydrologic and hydraulic modeling and planning studies, performing 2D hydraulic analysis, and assisting with the development and coaching of junior staff. Preferred candidates will have demonstrated project experience serving as a technical lead for drainage master plans, floodplain modeling and mapping, open channel design, and urban drainage systems for municipalities, counties, river authorities, TWDB, and TxDOT. The candidate must also have an advanced knowledge of using 2D hydraulic software including Innovyze ICM and HEC-RAS 2D. Requirements: Bachelor of

San Antonio, TX 78216 • (24.5 miles) • Full Time • 10/21/2026

About the Opportunity: Join our client, a leader in the aircraft maintenance, repair, and overhaul industry, located at Garner Field Airport in Uvalde, Texas. As an MRO Quality Inspector, you'll be an integral part of a team dedicated to ensuring the highest standards of quality, safety, and compliance in supporting business aircraft. This role offers an exciting opportunity to apply your expertise in a dynamic and impactful setting, contributing to the smooth operation and safety of essential aviation services. Responsibilities Conduct thorough inspections of aircraft, engines, components, and systems for FAA and customer compliance. Review work orders, task cards, and maintenance records for accuracy and completeness. Verify the use of current manufacturer manuals, FAA-approved data, and

Boerne, TX 78006 • (18.1 miles) • Full Time • 10/20/2026

As a Timber Frame Designer/Detailer - CAD, you'll convert big customer ideas into fabrication-ready drawing sets that let every timber frame take shape. Working in AutoCAD and Cadwork-alongside Revit, SketchUp, and related tools-you'll develop clean 2D/3D models, generate takeoffs/cut information that supports sales and estimation, and keep drawing standards, file organization, naming conventions, and revision control tight from concept through release. You'll partner with architects, engineers, contractors, customers, and internal teams to align scope, production scheduling, resources, and budgets. You're comfortable with the engineering process and the permitting process, apply basic architectural principles, and work confidently with building codes, regulations, standards, and the Inter

San Antonio, TX 78257 • (19.4 miles) • Full Time • $16.00 to $18.00 / hr • 10/20/2026

Benefits: Childcare Assistance 401(k) Health insurance Opportunity for advancement Training & development Tuition assistance Are you passionate about the art of barbecue and looking to join a legendary team? Rudy's BBQ, the home of "The Worst" Bar-B-Q in San Antonio, is expanding its exceptional team of cutters across all four of our San Antonio locations. With 37 years of tradition, Rudy's BBQ is a beloved institution in San Antonio, and we are searching for experienced individuals to join our certified team. What We Offer: No late nights, promoting work-life balance. 40-hour work weeks 401k plan Comprehensive benefits package, including paid health insurance Meal Plans s for all Team Members. Retention and Referral Bonuses to reward your dedication. Drug-Free Workplace environment. Child

San Antonio, TX • (29.7 miles) • Full Time • $20.00 to $28.00 / hr • 10/20/2026

Washing Equipment of Texas (WET) is a full service company in the industrial cleaning equipment market. We are looking for service technicians with strong mechanical and industrial AC electrical skills. Diesel Engine experience a plus but not required. This position will be part of a team that provides quality customer service through the installation of new equipment, diagnosing and repair of existing equipment and communicating any additional needs of the customer to the appropriate department(s). TRAINING IS PROVIDED. Extensive Benefits: • Competitive Salary. • Bonus Program. • Several Health Insurance plans to choose from. • Multiple Supplemental insurance plans to choose from. • Group Life Insurance. • Retirement Plan with company matching. • Paid Vacations. • Holiday and Sick Pay. •

San Antonio, TX 78258 • (17.9 miles) • Full Time • 10/20/2026

SUMMARY We are seeking a Mechanical Engineer who can translate customer specs, engineering standards, and real-world challenges into clear, accurate, buildable designs. You'll work across engineering, manufacturing, and project management teams to ensure our enclosures are not only functional but exceptional. RESPONSIBILITIES Interpret customer specifications and internal requirements to develop 3D models and 2D fabrication drawings Collaborate with engineers and project managers to ensure accuracy, manufacturability, and completeness Own the quality of your workproactively identify issues before they hit the shop floor Use SolidWorks and DraftSight (or similar software) to generate and revise technical drawings Build a detailed Bill of Materials (BOMs) in alignment with production and pro

San Antonio, TX • (29.7 miles) • Full Time • $75,000 to $100,000 / yr • 10/20/2026

Job Summary The Manufacturing Engineer is responsible for developing, implementing, and optimizing manufacturing processes, equipment, and workstations to support safe, efficient, and high-quality production. This role partners closely with Product Engineering, Operations, Quality, and Supply Chain teams to ensure manufacturability, process robustness, and seamless product launches. Responsibilities Develop, procure, install, and validate manufacturing workstations and equipment ranging from manual assembly stations to fully automated production and test systems. Provide Design for Manufacturability (DFM) feedback to product engineering teams to improve manufacturability, reduce production costs, and optimize assembly processes. Design, document, and implement safe, efficient, and repeatab

Schertz, TX 78154 • (24.9 miles) • Full Time • 10/20/2026

POSITIONS AVAILABLE IN SAN ANTONIO/AUSTIN - TRAVELING/LONG TERM JOB LOCATIONS AVAILABLE AS WELL About Valor Specialized Rigging Valor Specialized Rigging is a Texas-based rigging company providing high-performance lifting and specialized load-handling solutions across the San Antonio and Austin markets. We partner with general contractors, industrial facilities, and project teams to execute complex lifts safely, efficiently, and on schedule. Our mission is simple: deliver unmatched precision, professionalism, and safety on every job, no matter the size or scope. Overview Valor Specialized Rigging is hiring experienced Millwrights who know how to work around cranes, execute complex picks, and install equipment the right way the first time. This is not a maintenance role; this is field work

San Antonio, TX • (29.7 miles) • Full Time • 10/20/2026

Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation’s most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core valuesagility, expertise, and trustwe foster a collaborative and forwa

Boerne, TX 78006-8914 • (20.2 miles) • Full Time • $40,000 to $50,000 / yr • 10/19/2026

Description: GENERAL DESCRIPTION OF POSITION: This position supports activities within Technical Services including change control, validations, qualifications, and also supports manufacturing operations with investigating and writing reports for manufacturing investigations, non-conformances, and deviations. Requirements: ESSENTIAL DUTIES AND RESPONSIBILITIES : Multi-Category Competence: Demonstrate proven knowledge and technical competence across the duties and responsibilities of at least three of the five specified Technical Services (TS) categories. Equipment and Utility Qualifications: Prepare Installation Qualifications (IQ), Operational Qualifications (OQ), Performance Qualifications (PQ), and Re-Qualifications for new or modified manufacturing and laboratory equipment and systems.

San Antonio, TX 78216 • (24.5 miles) • Full Time • 10/19/2026

Survey CAD Tech Position Summary: Texas - Austin, Dallas, San Antonio Join KFM Engineering & Design as a full-time, on-site Survey CAD Technician. In this role, you will support the field-to-finish survey process and assist with a variety of commercial and development projects across Texas, including Boundary Surveys, As-Builts utilizing Terrestrial Scanning, and site development projects. Responsibilities include property research, field crew preparation, survey computations, and drafting technical plans, 2D/3D models, and construction documents using Civil3D. You will work closely with survey crews, engineers, and project managers to deliver accurate, high-quality project deliverables. The ideal candidate is detail-oriented, collaborative, and eager to grow within a team-focused environm

San Antonio, TX • (29.7 miles) • Full Time • $55,000 to $250,000 / yr • 10/19/2026

Job Title: Field Service Controls Engineer Job Type: Full-Time Travel Requirement: Up to 90% We are seeking a highly motivated Field Service Controls Engineer to become an integral part of our team. In this dynamic, hands-on role, you will deliver premier controls engineering solutions across diverse industrial automation sectors, including Automotive, Defense, Food Preparation, Entertainment, Pharmaceutical, and Aerospace. This position is ideal for a proactive problem-solver who thrives in fast-paced environments and enjoys traveling to client sites to bring complex automated systems to life. Key Responsibilities System Start-Up & Debugging: Lead the installation, commissioning, and debugging of new industrial automation and control systems at client facilities. Troubleshooting & Optimiz

San Antonio, TX 78252 • (41.2 miles) • Full Time • $60,000 to $65,000 / yr • 10/18/2026

Benefits: Health insurance Paid time off Vision insurance 401(k) Company car Dental insurance Employee discounts We are seeking experienced Landscape Maintenance Production Manager for our San Antonio, TX location. Position Overview: The Landscape Production Manager is responsible for driving daily field production by leading crews, coordinating schedules, managing materials and equipment, and ensuring efficient rollout of work across all properties. This role is hands-on and fast-paced, focused on execution, accountability, and keeping production moving safely, on time, and on budget. Key Responsibilities: Crew Leadership & Productivity · Lead, motivate, and push multiple landscape crews to meet daily and weekly production goals · Set clear expectations for crew leaders and field staff re

Boerne, TX • (20.2 miles) • Full Time • 10/17/2026

**Job Title:** Industrial Painter **Location:** Remote-Jobsite **Job Type:** Full-Time **Company:** TB Industrial LLC **About Us:** TB Industrial operates both as a self-performing general contractor and as a key teaming subcontractor. We serve clients in the private sector midstream and downstream oil & gas markets, airports and FBO’s, the Department of Defense, and the Department of Energy. **Job Summary:** The Industrial Painter will be responsible for setting up industrial coatings equipment and building containments. They will prepare surface preparation and painting tasks in accordance with project specifications, manufacturer's guidelines and AMMP requirements. This role requires a keen eye for detail, a strong work ethic, and the ability to work independently as well as part of a t

San Antonio, TX • (29.7 miles) • Full Time • $25.00 to $55.00 / hr • 10/17/2026

San Antonio, Texas | Field work | Contract, paid per work order | $25 to $55 per hour About Service Robot Co. Service Robot Co. helps businesses across all 50 states choose, deploy and maintain commercial robots, with 24/7 support. We supply all types of robots for all types of automation. We handle site assessments, robot selection, installation, system integration and team training. Purchase, financing and rental options are available, backed by ongoing maintenance and repairs. One partner from your first consultation through everyday operation. About the role As a Contract Robot Technician, you are our person on site. You install, maintain and repair commercial robots at customer locations, and a remote specialist supports you on every job. This is hands-on, safety-focused work at sites