Sealy, TX 77474 • (40.6 miles) • Full Time • 10/8/2026

Position Summary Shift: 4:00PM until 12:00AMDays: Monday - FridayHailiang Copper Texas, Inc. is seeking a Laboratory Technician to join our Quality Department at our manufacturing facility in Sealy, Texas. The Laboratory Technician will perform routine testing, inspection, and analysis of copper products and materials to ensure they meet company specifications, customer requirements, and applicable quality standards.This position works closely with Quality, Production, and Technical personnel to identify quality issues, maintain accurate testing records, and support continuous improvement throughout the manufacturing process.Essential Duties and Responsibilities Perform laboratory testing and analysis of raw materials, in-process materials, and finished copper products.Prepare samples for

Houston, TX 77064 • (7 miles) • Full Time • 10/8/2026

Key Responsibilities:Perform test cycle operations for pre and post screening for our burn-in process.Utilize PC to load correct firmware per work instructions.Document test results and generate reports as requested.Perform electrical maintenance, repairs, and inspections on manufacturing equipment.Diagnose and troubleshoot issues with motors, control panels, sensors, wiring, and automated systems.Support equipment installation, calibration, and upgrades.Read and interpret electrical schematics, diagrams, and technical manuals.Maintain accurate maintenance records and utilize computerbased tools for work orders and documentation.Follow all safety procedures and support continuous improvement initiatives.Other duties as assigned.Preferred Qualifications:Associate’s degree in Electrical Tech

Houston, TX 77086 • (8.5 miles) • Full Time • 10/8/2026

Position: Production PlannerOffice Location: Houston, TX 77086Work Hours; Monday to Friday @8:00-17:00 (Lunch: 1 hour)Salary: $36.00~40.00 per hour+ Overtime **Annual Base: $74,880~83,200Status: Non-Exempt (Qualified for OverTime pay)Start: ImmediatelyTemp to a Direct Hire in the future (The term is not specified- Negotiable for the term)Work Style: 100% Onsite at the production facilityLanguage: EnglishRequired Education: a Bachelor's Degree (Must)Required Work Experience: Minimum of 3 years of experience as a Production Planner or material control in a manufacturing environment.Required Knowledge: MRP, BOMs, routings, and material flowJOB SUMMARYThe Production Planner is responsible for executing daily planning activities that support the production schedule, ensuring material readiness,

Spring, TX 77380 • (10 miles) • Full Time • 10/8/2026

HYBRID ONSITE TUESDAY, WED, THURSDAY!JOB DESCRIPTIONAn O&G client in The Woodlands, TX is looking for an Automation & Controls Engineer to join their Operations team. This role will be an ongoing contract role extended on an annual basis. This role will work a hybrid (Tues-Thurs in office, Mon & Fri remote) 9/80 schedule (every other Friday off). This role is seeking an experienced Automation and Controls Engineer to support the installation, configuration, maintenance, and troubleshooting of automation, control, and OT network systems supporting offshore oil and gas operations. They will provide expertise in troubleshooting, and lifecycle support for PLCs, HMIs, instrumentation, networks, virtualized servers, and Windows systems. They will use engineering documents to validate control log

Houston, TX 77040 • (10.4 miles) • Full Time • 10/8/2026

Onstream Pipeline Inspection is a leading provider of Inline and Tethered Magnetic Flux Leakage, Caliper, and Inertial Measurement inspection services for oil and gas pipeline operators across North America.Join Our Team as a Shop Technician. Are you a detailed orientation technician with strong mechanical and electrical aptitude? We are seeking a Shop Technician to play an essential support role in our Houston operations. In this role, you will contribute directly to the mechanical and electrical preparation, maintenance, and troubleshooting of our specialized inline inspection (ILI) tools.The ideal candidate brings strong technical skill, a proactive work ethic, and a commitment to maintaining safe, efficient shop operations.Key Responsibilities:Build, repair, and perform preventative ma

Houston, TX 77041 • (11 miles) • Full Time • 10/8/2026

Description: PURPOSE:In accordance with company policies and procedures, the Completion Tools Supervisor – Frac Plug Assembly will lead the Frac Plug Assembly operation to ensure safe, efficient, and high-quality production. This position is responsible for department performance, including safety, quality, delivery, labor efficiency, employee development, and continuous improvement. Reporting to the Operations Manager, the Supervisor will coordinate with cross-functional teams to resolve operational issues, meet customer requirements, and ensure products are assembled in accordance with approved engineering specifications and quality standards.CRITICAL FUNCTIONS:1. Ensure all Frac Plug Assembly work complies with approved drawings, specifications, procedures, bills of material, inspection

Houston, TX 77022 • (17.5 miles) • Full Time • 10/8/2026

Job DescriptionWFI International Division of Bonney Forge, the leading manufacturer and supplier of integrally reinforced branch connection fittings to the power, oil and gas, chemical, and other industries, is looking for a CNC Machinist Trainee. WFI is an equal opportunity employer and makes employment decisions without regard to race, gender, disability, or protected veteran status.Primary Responsibilities:· The CNC Machinist is responsible for the set up and operation of (CNC) VTL, lathes, and NC Mills.· Check work center status at the beginning of the shift and report any issues to the supervisor in charge.· Validate programs as required by producing a proof part for review.· Perform own first article inspection and make adjustments as necessary.· Perform in-process inspections of pro

Humble, TX 77396 • (19.1 miles) • Full Time • 10/8/2026

At Tray-Tec, you're not just joining a companyyou're becoming part of a team that is setting a new standard in industrial field services. Founded in 2005, Tray-Tec has built a strong reputation for delivering safe, high-quality turnaround and tower services to refineries, petrochemical facilities, and gas plants across the United States.Employees have the opportunity to work on complex, high-impact projects, gain valuable industry experience, and contribute to critical infrastructure that powers communities and industries worldwide. With a culture built on teamwork, professionalism, and continuous improvement, Tray-Tec offers a place where hard work is recognized, and career growth is encouraged.Safety CommitmentSafety is a core value and a condition of employment. All employees are respon

Houston, TX • (19.5 miles) • Full Time • 10/8/2026

Supervise daily activities and lead a project execution team • Responsible for scope, quality of work, schedule, budgets and execution planning • Identify scope changes and coordinate change management • Specify power distribution systems for industrial projects from 120V up through 35kV • Support the development of one-line diagrams, data sheets, load lists, motor schematics, hazardous area classification requirements and facilitate engineering deliverables for design package issuance • Validating equipment ratings and conducting calculations such as cable-sizing and load evaluations • Specify electrical equipment and follow through from RFQ development through to the project starting. Experience with equipment FAT’s is preferred. • Prepare cost competitive man-hour estimates and assist

Houston, TX • (19.5 miles) • Full Time • 10/8/2026

Our ideal candidate has experience in manufacturing engineering, production support, and continuous improvement within industrial, energy, Oil & Gas, or discrete manufacturing environments. The candidate should be capable of improving manufacturing efficiency, supporting production operations, resolving technical challenges, and collaborating effectively across engineering, quality, planning, procurement, and supplier teams.What You Will Do:·Lead continuous improvement initiatives to improve productivity, quality, safety, and cost.·Develop and maintain manufacturing work instructions, process documentation, and QC work methods.·Conduct time studies and process analysis to improve manufacturing efficiency.·Design and implement fixtures, tooling, and manufacturing aids.·Create and maintain e

Houston, TX 77034-5561 • (19.5 miles) • Full Time • 10/8/2026

Description:The Powder Coating Lead supports the Powder Coating Supervisor by directing the safe, organized, and productive execution of daily work on the assigned shift. This position coordinates team activities, helps maintain coating quality and flow, supports accurate part tracking and shift handoffs, and provides hands-on coaching so work is completed according to production, quality, and safety expectations. The Lead operates within the direction and authority of the Powder Coating Supervisor and escalates issues that require management action.Requirements:Core Responsibilities· Coordinate daily work assignments for preparation, cleaning, masking, racking, coating, curing, inspection, packaging, and movement of finished parts.· Translate the shift plan and department priorities into

Houston, TX • (19.5 miles) • Full Time • 10/8/2026

JOB DESCRIPTION: COMPUTER PART INSPECTOR1. OVERVIEWA computer services company in Northwest Houston is looking for a capable inspector in our Tech Lab to support our company’s operations. Daily tasksinvolve various quality control activities to include, but not limited to inspecting computer parts, testing, disassembly, and assembly. This job requires one to be on a computer frequently with a very high level of attention to detail. Previous experience at HP, Flextronics, or Foxconn is a plus. The following includes most daily duties.This is a 1099 Contract position for 90 days. Options to extend contract or hire full time after the 90 days are available.2. DUTIES· Inspects units for cosmetic defects and reports findings· Analyzes equipment performance and functionality using testing softwa

Houston, TX 77051-1545 • (19.5 miles) • Full Time • 10/8/2026

Description: Position Title: Industrial Engineer ILocation: 3701 Holmes Road, Houston, TX 77051Department: Engineering & Special ProjectsReports To: Director of Projects & EngineeringWork Schedule: M - F 8-5, Sat 8 -12 Noon**Must be eligible to legally work in the US without sponsorship.Role OverviewThe Industrial Engineer I role is responsible for coordinating all technical activities on assigned projects. This position plans, schedules, conducts, and coordinates assigned engineering work. This role also monitors all work for compliance to applicable codes, accepted engineering practices, and PTP standards; ensuring effective communication and coordination on assigned projects between all disciples and all other project participants.Key ResponsibilitiesPlanning, Scheduling, Conducting, &

Stafford, TX 77477 • (27.3 miles) • Full Time • 10/8/2026

Proman Skilled Tradesis currently seeking experiencedHVAC Sheet Metal Mechanicsfor a variety of large scale construction projects. You will be working on Commercial construction projects in theHouston, area.Responsibilities• Install Sheet-Metal Duct (Squared, Round,Spiral, Rectangular etc.)• MUST have some pipe fitting experience, know how to apply Pookie and insulate• Install grills and dampers and set units• Set curbs for RTU's• Adhere to all quality and safety codesQualificationsAt least 2 year of commercial experience in the HVAC Sheet-Metal field• Familiarity with Sheet-Metal schematics, blue prints and manuals• Familiarity with Sheet-Metal equipment and hand tools• Must be able to handle a physical work load• Must have own tools and reliable transportation• Strong problem solving and

Stafford, TX 77477 • (27.3 miles) • Full Time • 10/8/2026

Production Manager – Sign Manufacturing & InstallationSignarama Houston | Houston, TX | Full-time, on-site| Schedule: Monday–Friday, some early startsRun the shop. Own the schedule. Hit the number.At Signarama Houston we design, build, and install signs for businesses, both here in Houston and at job sites across the US. We need a hands-on Production Manager to take every job from order to invoice. You'll lead our production team, keep equipment and trucks running, and make sure every install gets done right the first time.What you'll doMove every job through receiving, design, permitting, production, QA, scheduling, install, and invoicing, without letting anything stall.Schedule local install crews and service technicians, and make sure every truck leaves with the materials it needs to fi

Houston, TX 77070 • (3 miles) • Full Time • 10/7/2026

Senior Controls System EngineerJob Type: Full Time, On-SiteWho We Are:Southern Integrated Solutions and Consulting is a forward-thinking systems integration company offering an extensive range of services, products, and customized systems in sectors such as oil & gas, utilities, manufacturing, and mining. Our team composed of seasoned Electrical and Control Systems Engineers, Consultants, Project Managers, System Integrators, and I&E Technicians excel in Automation, SCADA, I&E Construction, Process Control, Safety Instrumented System Design, Safety Integrity Level Selection & Verification, Safety Lifecycle Modeling, Real-Time Data Collection, MCC & Switchgear Design, and Fabrication.Job Description:Southern Integrated Solutions and Consulting (SISC) is searching for an experienced automati

Houston, TX • (19.5 miles) • Full Time • 10/7/2026

Job OverviewThe Quality Inspector (QA/QC Technician) ensures that energy storage products, components, and on-site installations adhere to strict quality standards. This role performs detailed inspections, manages non-conforming materials, conducts root cause analysis (RCA), and maintains comprehensive documentation for battery energy storage systems (BESS).Positions available to support projects in The Houston Texas area, Arizona or Southern California.Keys to Success· Administrative Excellence: Outstanding organizational skills with an ability to manage meticulous data, logs, and quality paperwork.· Autonomy & Initiative: A proactive self-starter who identifies issues and drives resolutions with minimal oversight.· Technical Communication: High proficiency in capturing clear photo docume

Houston, TX 77002 • (22 miles) • Full Time • 10/7/2026

Overview Company Overview:Allied Universal®, North America’s leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description Allied Universal® is hiring a Training and Quality Assurance Manager. The Training and Quality Assurance Manager is responsible for ensuring compliance with all required portfolio training, as well as Allied Universal standards and reports directly to the CE Regional Training Director.RESPONSIBILITIES:Ensure compliance with all required portfolio training, which involves driving compliance efforts and coordinating traini

Katy, TX • (22.6 miles) • Full Time • 10/7/2026

Positions:CNC Lathe Machinist (2nd Shift)Manual Lathe Machinist (1st Shift)Manual Mill Machinist (1st Shift)Sinker EDM / Wire EDM Machinist (1st & 2nd Shift)CNC Mill Machinist (1st & 2nd Shift)Job description:Knust-Godwin is looking for Experienced:CNC Lathe MachinistsManual Mill MachinistsManual Lathe MachinistsSinker EDMWire EDM MachinistCNC Mill MachinistWe have night shift positions currently open for immediate hire.Our night shift position pays plus 10% of your hourly wage, and we have excellent Health Insurance Benefits.We have an air-conditioned facility and Great Machines with the Tooling needed to machine the parts.Experienced required is 5 years plus in downhole oil tool machiningGD&T knowledge reading blueprints and inspecting their own parts.Must be able to set up the machine w

Houston, TX • (19.5 miles) • Full Time • 10/7/2026

Location: Houston, TexasWork Arrangement: Hybrid 3 days per week in the office / 2 days remoteEmployment Type: Full-TimeExperience Level: Mid-Senior LevelRequired Experience: 12+ yearsEducation: Bachelor's degreeJob Function: EngineeringIndustry: Mechanical / Industrial EngineeringCompensation: $141,000–$160,000 annuallyNumber of Openings: 1Relocation Assistance: Not availablePosition Overview At North Star Talent Group, we connect exceptional talent with exceptional organizations. One of our valued clients is currently seeking a highly qualified Associate Mechanical Engineering Lead – Healthcare to join their growing team.This confidential opportunity is ideal for an experienced mechanical engineer with a strong background in healthcare design who is ready to take on broader responsibilit

Houston, TX 77047 • (30.6 miles) • Full Time • 10/7/2026

Custom Air Products & Services, Inc. (CAPS)is a Houston-based, full-service HVAC company specializing in the design, fabrication, installation, and servicing of industrial and commercial air conditioning and heating systems. Since 1996, CAPS has built a reputation for delivering high-quality, custom-engineered solutions to customers across a wide range of industries.With a team of skilled professionals and multiple Texas-based facilities, CAPS provides end-to-end capabilities including HVAC manufacturing, mechanical field services, and parts distribution. As part of AirX Climate Solutions, we are committed to safety, quality, and customer satisfactioncreating a team-oriented environment where employees can grow, contribute, and support essential operations across the industries we serve.We

Spring, TX 77379 • (2.5 miles) • Full Time • 10/7/2026

Reports To: General ManagerEdit Holdings LLC dba Tide Cleaners is seeking hardworking, team-oriented, and reliable individuals to join our wedding preservation production team. This position does not require any prior experience within the dry-cleaning industry but does require a commitment to learn and work within a team atmosphere.Duties & ResponsibilitiesDemonstrate company core values at all times: Guest Services, Excellence, Committed, Integrity, and Top Quality.Repair tears, apply buttons and beads to wedding gowns, trains, and veils.Work on fine fabrics, laces and intricate beadingMaintain a clean and well-organized work area at all times.Be able to operate all productions areas: assembly, boxing wedding dresses, label and shipping.Know the basics of pressing and be able to adapt to

Tomball, TX 77375 • (5.2 miles) • Full Time • 10/7/2026

Location: TomballShift: 6am-2:30pm Mon-FridayTemp to hire with good benefits including bonus programThis position will operate an injection molding machine in the process of manufacturing lined plug and ball check valves. Work will be performed according to written procedures and specifications, including:o Understand and follow applicable manufacturing, quality, and safety procedureso Handle and move materials and parts per job assignment requirementso Set up and operate injection molding machines and ovenso Mold parts per drawings and specificationso Conduct In-process quality inspections• Ability to read, understand, and follow complex, multi-step procedures.• Ability to perform physical tasks using manual and power tools.• Ability to safely lift and handle parts up to 50 lbs.• Visual a

Houston, TX 77067 • (8.7 miles) • Full Time • 10/7/2026

Benefits:Company partiesCompetitive salaryDental insuranceEmployee discountsHealth insuranceOpportunity for advancementPaid time offTraining & developmentTuition assistanceVision insuranceWellness resources Founded in 1990, FERPA Precision Machine, Inc. is a family-owned business with more than 35 years of precision manufacturing expertise. Known for our high-performance plastic seals and oilfield components, we have expanded our capabilities to include small- to medium-sized precision metal parts, with a growing focus on aerospace manufacturing. At FERPA, we combine advanced manufacturing technology with a client-focused, quality-driven approach. We value each team member’s contribution and take pride in continuing our tradition of quality, craftsmanship, and excellence. Learn more about

Houston, TX 77095 • (9.4 miles) • Full Time • 10/7/2026

Duties and ResponsibilitiesRead and interpret shop work instructions and shop procedures.Produce machined components per sample or print.Operate CNC Lathe and CNC Milling machines with Fanuc and Mazatrol controls.Successfully complete Operator Safety Training of Powered Industrial Equipment Training Course.Overtime and weekend work required.Knowledge, Skills and AbilitiesAbility to stand, crouch, bend for 8-10 hour shifts.Must be able lift up to 40 Lbs on occasion.Basic computer skills.Problem solving skills.Ability to work as a team.Strong attention to detail.Excellent written and verbal communication.Education and QualificationsHigh School or GED required.Min 3+ years of experience as a CNC machine operator.Must be able to read, write and speak English.

Houston, TX 77041 • (11 miles) • Full Time • 10/7/2026

Spitzer, a recognized industry leader in designing and fabricating high-specification equipment, is currently seeking a CAD Designer to join our team.The CAD Designer reports to the Design Manager and is responsible for IFA & IFC deliverables. This position will support day-to-day Engineering Department demands and select projects.The purpose of this job description is to explain the responsibilities and requirements associated with the position. While the following information is comprehensive, it should be noted that some responsibilities and duties may not be specifically addressed. The Spitzer Companies emphasize a team approach and fully expects every person to perform any reasonable task or request that is consistent with fulfilling company objectives. RESPONSIBILITIESThis position w

Houston, TX 77039 • (15.7 miles) • Full Time • 10/7/2026

Use AutoCAD or similar CAD software to prepare detailed shop drawings for millwork fabrication.Read and interpret architectural and shop drawings, blueprints, and specifications.Collaborate with project managers, architects, engineers, and other stakeholders to ensure accuracy and completeness of drawings.Visit construction jobsites to verify measurements and dimensions as necessary.Perform material takeoffs and prepare cut lists.Ensure compliance with all relevant codes, standards, and regulations.Maintain accurate records and documentation of all drawings and related materials. Requirements Minimum 2-3 years of experience in the millwork industry.Proficiency in AutoCAD or similar CAD software, with minimum 1-3 years of experience.Ability to read and interpret architectural and shop drawi

Houston, TX 77079 • (17.1 miles) • Full Time • 10/7/2026

About CANUSA EPCCANUSA EPC is a growing engineering, procurement, and construction company delivering high-quality solutions across the energy industry. Our team supports projects involving natural gas processing, cryogenic systems, LNG, refrigeration, gas treating, dehydration, pipelines, and related energy infrastructure.At CANUSA EPC, we provide practical engineering solutions, build strong client relationships, and foster a collaborative environment where talented professionals can grow their careers while making a meaningful impact on project success.Position SummaryCANUSA EPC is seeking an experienced Senior Process Engineer to join our growing Houston team.This role is ideal for a technically strong engineer who enjoys solving complex process challenges and contributing to the succe

Humble, TX • (18.3 miles) • Full Time • 10/7/2026

Entry-Level CNC Lathe Machinist (CNC Lathe Machinist I)Location: Humble, TXSchedule: Day shift | 8:00 AM–5:00 PM | 40 hrs/weekType: Temp-to-PermPay: $16–$19/hr (based on experience)Openings: 2Position Summary We’re hiring an entry-level CNC Lathe Machinist to help produce precision machined components (small to medium-sized parts such as flanges, fittings, and similar products). This role is ideal for someone with 1–2 years of machining experience who’s eager to grow in a precision manufacturing environment.What You’ll Do Set up and operate CNC lathes using setup sheets, work instructions, and blueprintsLoad/unload raw material and finished parts safely and efficientlyVerify setups and perform first-piece and in-process inspectionsMake minor machine adjustments and tool offset changes to m

Houston, TX • (19.5 miles) • Full Time • 10/7/2026

The Plant Manager leads the startup, production ramp-up, and ongoing operations of Translucent Solar’s solar module manufacturing facility. This position is accountable for plant safety, product quality, production performance, on-time delivery, workforce development, equipment reliability, and manufacturing costs.This is a hands-on leadership opportunity to help build a manufacturing operation from the ground up-establishing effective processes, developing a strong team, and creating a culture of safety, accountability, and continuous improvement. The Plant Manager translates company objectives into operating plans and coordinates the people, equipment, and resources needed to achieve production goals.This position requires an on-site presence and regular engagement with employees through

Houston, TX • (19.5 miles) • Full Time • 10/7/2026

DescriptionAbout Us:The Caturus platform founded by Kimmeridge – an alternative asset manager focused on the energy sector – supports Kimmeridge’s overarching goal of providing low-cost energy on demand with the lowest carbon footprint.Kimmeridge’s vision in creating Caturus is to build the only independent, fully integrated natural gas and LNG export platform in the U.S. through a combination of its upstream operations and via Commonwealth LNG, a 9.5 million tonnes per annum liquefied natural gas export terminal in southwestern Louisiana on the U.S. Gulf Coast. The combined entities are committed to delivering responsibly sourced, low-emission fuel to domestic and international markets.Caturus is a Houston-based, private exploration and production company seeking to materially grow produc

Houston, TX 77052 • (22.2 miles) • Full Time • 10/7/2026

WELCOME TO JOHNSTONJohnston is a collaboration of experienced engineers, architects, planners, and managers working together to create thoughtful and functional design throughout the great state of Texas. We work on projects that make a difference in people’s lives and make our world a safer place.Mission: Our people are the heart of our business. We build highly engaged and collaborative teams dedicated to executing thoughtful, creative design solutions. We are passionate, optimistic, dedicated, efficient, and driven by our entrepreneurial roots.Vision:To provide the best client service in design and construction. Our Vision is reflected in our designs, our team members, and our culture. It has resulted in the strong, trusting relationships we have with our clients today and the standard

Willis, TX • (28.8 miles) • Full Time • 10/7/2026

Job SummaryResponsible for performing a variety of tasks involved in the assembly of Chemtec products while following standard work methods and practicing safe work habits to ensure production is as efficient and safe as possible. Responsibilities(Essential Functions)· Participate in all Safety Meeting· Maintain a safe and clean working environment by complying with procedures, rules, and regulations.· Follow and initiate 5S standards maintaining safe and clean work area.· Ability to read and interpret assembly drawings, P&ID’s, and instructions.· Assemble, Fit, aligns, and adjust pipe spools/components to specifications per drawings.· Operate basic power and hand tools to assemble products according to specifications.· Perform quality checks on finished products to ensure they meet qualit

Baytown, TX • (40.4 miles) • Full Time • 10/7/2026

The duties of the Mechanical Engineer position will include:• Research, develop, design, test and implement the installation of the mechanical system for welding and repair welding of line pipe.• Apply knowledge of Submerged Arc, Gas Metal Arc Welding (GMAW), Plasma Arc, Tungsten Inert Gas (TIG) and Heli Arc Welding to maintain and improve the welding functions in both fabrication of pipe and maintenance of plant facilities.• Direct engineering and maintenance personnel in the mechanical functions associated with the manufacturing of pipe and the maintenance of the plant and equipment.• Develop procedures to provide efficient and economical distribution of mechanical power and provides management with guidance as to power factors, usage and modernization of mechanical equipment.• Evaluate

Houston, TX 77064 • (7 miles) • Full Time • 10/6/2026

NOW HIRING: SHOP MECHANICAL TECHNICIAN LEVEL 2 and 3 Ready to take your mechanical skills to the next level? Join our team and play a key role in maintaining and repairing industry-leading drilling equipment in a fast-paced shop environment.What You'll Do: Perform maintenance and repairs on drilling equipment Diagnose mechanical issues and provide effective solutions Work independently while supporting shop operations Mentor and assist Shop Technician Level 1 team members Ensure quality workmanship and adherence to safety standards Maintain a clean, organized, and safe work environmentWhat We're Looking For: High School Diploma or equivalent experience 3–5 years of shop or oilfield equipment experience Strong mechanical aptitude and troubleshooting abilities Ability to read schematics, dr

Houston, TX 77032 • (14.3 miles) • Full Time • 10/6/2026

Benefits:401(k)Competitive salaryDental insuranceHealth insurancePaid time offVision insurancePOSITION PURPOSE The Quality Manager at Bayport Laboratories is responsible for developing, enhancing, and enforcing current Good Manufacturing Practices (cGMP) to ensure full compliance with federal and state regulations, as well as specific customer and industry requirements. This role plays a critical leadership function in both Quality Assurance (QA) and Quality Control (QC), ensuring the integrity, safety, and quality of all products manufactured and released ESSENTIAL FUNCTIONS AND BASIC DUTIES• Ensure compliance with federal, state regulations, and customer specifications related to the quality of the products • Execute and manage closure of quality systems related records such as Deviation

Houston, TX • (19.5 miles) • Full Time • 10/6/2026

We are seeking a Manufacturing Engineer II to support manufacturing operations at a regulated manufacturing facility in Houston, Texas. This role provides engineering support to production, driving process improvements, troubleshooting equipment and process issues, and supporting quality and compliance activities.Key ResponsibilitiesProvide day-to-day engineering support to manufacturing lines, including equipment and process troubleshooting.Identify and implement process improvements to increase yield, efficiency and product quality.Support nonconformances, investigations, root cause analysis and CAPAs.Author and update manufacturing procedures, work instructions and technical documentation.Support change controls, equipment qualification and process validation activities.Work cross-funct

Houston, TX • (19.5 miles) • Full Time • 10/6/2026

Position Summary:Independently evaluates, selects and applies engineering techniques, procedures and criteria to concurrent engineering projects. Applies engineering judgment in making adaptations and modifications to projects. May manage one or more engineers and/or designers.Key Roles & Responsibilities:Job functions will include: significant design and design review responsibilities, engineering calculations, studies, detailed design, report writing, field investigations and direction of lower-level engineers and/or designersInteracts with Project Managers and other engineersDirects project workflow of engineers, designers and drafters to ensure project completionResponsible for the technical content and quality of the work, and the functional integration of individual project tasksSele

Houston, TX • (19.5 miles) • Full Time • 10/6/2026

MANUAL MACHINIST – Up to $36.00 / Hour & Full Benefit PackageVi-TECH is actively looking for 1st Class Manual Machinists for 1st and 2nd shifts.Vi-TECH employees enjoy a generous compensation package, including the following.Very competitive Base PayAnnual Performance Review and Bonus PlanMedical, Dental, & Life Insurance401K Retirement Plan with Company MatchPaid Sick Days and HolidaysClimate Controlled Shop - COLD A/CVi-TECH provides a wide variety of services for the industrial equipment repair industry and our Manual Machinists are required to have broad knowledge & experience in the precision machining trade.Technical Skills:Capable to setup and operate a variety of machine tools, including horizontal lathes, vertical lathes, boring mills, vertical mills, keyseaters and other misc. eq

Katy, TX 77493-2109 • (22.6 miles) • Full Time • 10/6/2026

Area Plant Manager Job Description:Position Summary:Primary responsibilities are to oversee the operation and maintenance of multiple concrete batch plants, equipment and trucks in good working condition. He will work with other supervisors and managers to expedite production and dependable delivery of quality concrete to job sites. He will supervise and ensure that all plant personnel are properly trained and adhering to all safety, environmental, maintenance and regulatory requirements. He will monitor raw material inventories and concrete for quality and quantity.Duties and Responsibilities:Ensure the opening and closing of plant facilities according to company policies, procedures and guidelines.Supervise and ensure that assistant plant managers, batch plant operators, drivers, loader

Houston, TX 77049 • (28.3 miles) • Full Time • 10/6/2026

Position OverviewThe Mechanical Technician, Level 2 is responsible for assembling, installing, modifying, and testing mechanical components and systems used in power generation equipment, including gas turbine packages and aviation-derived turbine systems. This role supports the assembly and integration of equipment associated with industrial power generation projects, including projects utilizing turbine technology. The ideal candidate will have strong mechanical aptitude, experience working with rotating equipment, and the ability to interpret technical drawings and assembly instructions.Key ResponsibilitiesAssemble mechanical components and systems according to engineering drawings, schematics, and assembly instructions.Perform fitting, mounting, alignment, adjustment, and operational t