Gladewater, TX • (25.2 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (34.7 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gladewater, TX • (25.2 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (34.7 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gladewater, TX • (25.2 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Gilmer, TX 75644 • (34.7 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Bullard, TX 75757-2001 • (12.5 miles) • Full Time • 10/5/2026

Company: Boren to PaintLocation: Tyler, TexasEmployment Type: Full time or part time depending on experiencePay: Based on experience, reliability, production speed, and skill levelAbout Boren to PaintBoren to Paint is a growing painting and remodeling company serving Texas and Colorado. We handle residential and commercial painting, drywall repairs, carpentry, trim work, remodeling support, and renovation projects.Our Tyler team works in real jobsite conditions, including Texas humidity, rain, heat, UV exposure, and mildew concerns. We are looking for dependable people who take pride in clean work, steady production, and respectful client communication.This is a good fit for someone who wants consistent work, room to grow, and a company that values quality, speed, teamwork, and accountabil

Longview, TX • (33.8 miles) • Full Time • 10/5/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site.We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control syst

Longview, TX 75605 • (38.2 miles) • Full Time • 10/5/2026

Description: Plumbing Apprentice – Alco Air | Longview, TX Competitive Hourly Pay • Paid Training • Clear Path to Your LicenseStart a career, not just a job.Want to learn a trade that can't be outsourced, automated, or replaced? Alco Air is looking for a Plumbing Apprentice in Longview no experience required. We'll teach you everything. All you need is the right attitude and a willingness to work hard and learn.If you've been thinking about getting into the trades but didn't know where to start, this is it.What We Offer:Competitive hourly payMonday–Friday schedule evenings and weekends are yoursHands-on training with experienced, licensed plumbersA clear path to your plumbing license we support your licensing journeyStable, year-round work no seasonal layoffsMedical, dental, and vision ben

Mineola, TX 75773 • (26.1 miles) • Full Time • 10/5/2026

Benefits Offered:HealthcareDentalVisionPTO401KPay based on Experience.Your Job SummaryThe Regional Maintenance Supervisor will be responsible for supervising and coordinating the activities of the maintenance department to ensure environmental center compliance in accordance to Federal, State and Local ordinance, regulations and building codes. Ensures center is maintained in a sanitary, attractive, and orderly condition; in good repair, free from hazards such as those caused by electrical, plumbing, ventilation, heating and cooling systems. Also responsible for the provision of quality laundry service.Your Responsibilities• Supervises all Environmental Services personnel and daily work in assigned areas throughout center in an effective, efficient manner that enhances service levels while

Longview, TX • (33.8 miles) • Full Time • 10/5/2026

Longview, Texas | Full TimeService Technician at Peltier Kia Longview "Your career doesn't just start here it takes off here."At Peltier Kia Longview, we're not just another dealership we're a family. And we're looking for a skilled tech who's ready to grow with us, not just punch a clock. We've been part of East Texas for generations, and we take care of our own. You'll find a shop that invests in your tools, your training, and your future because when you win, we all win.You'll work alongside experienced technicians in a clean, well-equipped facility that gives you everything you need to do your best work every single day.Why Peltier? Benefits That Actually Matter.401(k) · Medical, Dental & Vision Insurance · Life Insurance · Paid Vacation · Paid Holidays · Paid Maternity & Paternity Lea

Tyler, TX • (0.8 miles) • Full Time • 10/5/2026

Benefits Offered:HealthcareDentalVisionPTO401KPay based on Experience.Your Job SummaryThe Regional Maintenance Supervisor will be responsible for supervising and coordinating the activities of the maintenance department to ensure environmental center compliance in accordance to Federal, State and Local ordinance, regulations and building codes. Ensures center is maintained in a sanitary, attractive, and orderly condition; in good repair, free from hazards such as those caused by electrical, plumbing, ventilation, heating and cooling systems. Also responsible for the provision of quality laundry service.Your Responsibilities• Supervises all Environmental Services personnel and daily work in assigned areas throughout center in an effective, efficient manner that enhances service levels while

Tyler, TX 75701 • (0.2 miles) • Full Time • 10/5/2026

Job SummaryResponsible for HVAC and mechanical building systems, utilizing knowledge of refrigeration theory, control systems, pipe fitting, and structural layouts.Skills and ExperienceFive to seven years related experience and/or training.Essential Functions and Duties (including but not limited to)Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction.Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units.Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers.Determines parts to order for repairs and timeliness of need.Uses power tools and computers.Identifies, analyzes, and repairs equipment, instruments and products at th

Tyler, TX 75701-0758 • (0.8 miles) • Full Time • 10/5/2026

If you’re not making at least $75K, read this.AVCO Roofing is hiring Project Managers with first-year earning potential of $75K to $150K+.No cap. No ceiling. No limits except your effort.This is commission-based, which means:You don’t get paid for showing up. You get paid for producing.What you’ll be doing:• Inspecting roofs• Helping homeowners navigate claims and repairs• Managing projects• Building relationships in your communityWhat we provide:• Training and ongoing support• Flexible schedule• Proven system that works• Strong team environmentWho succeeds here:• Sales-minded individuals• Former athletes• People tired of capped income• Anyone willing to learn and outwork the averageNo experience required.If you want predictable, this isn’t it.If you want opportunity, it is.www.avcoroofing

Tyler, TX • (0.8 miles) • Full Time • 10/5/2026

Fritcher Construction Services is seeking a Facilities Maintenance worker to join our team. This individual will play a key role within a small specialized team, responsible for maintaining the exterior grounds of multiple sites. This position requires proficiency in landscape maintenance, irrigation management, and equipment operation to ensure safe, attractive, and well-kept outdoor environments. Daily tasks involve flexible responsibilities and regular weekday travel between locations, reporting to a supervisor to support overall site upkeep and safety compliance.ResponsibilitiesPerform landscape maintenance to enhance site appearanceManage irrigation systems to ensure proper watering of plants and lawnsOperate manual and powered equipment efficiently and safelyProvide routine plant car

Tyler, TX 75706-6031 • (0.8 miles) • Full Time • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Tyler, TX 75707 • (7.3 miles) • Full Time • 10/5/2026

Entry Level Designer / DraftsmanTyler Building Systems, Tyler, Texas (Headquartered in Tyler, TX – Manufacturing custom metal building systems since 1968)About Tyler Building Systems: Tyler Building Systems is a leading manufacturer of high-quality, custom-engineered metal building systems. From commercial warehouses and industrial facilities to churches, recreational spaces, retail buildings, and agricultural structures, we deliver durable, tailored solutions built with American-made steel right here in Texas. We're committed to providing exceptional value, personal service, and reliable expertise for every project.Position Overview: We are currently seeking motivated Entry-Level Designers/Draftsmen for full-time positions on our design and drafting team. This is an outstanding opportuni

Kilgore, TX 75662 • (24.8 miles) • Full Time • 10/5/2026

Who are we?National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years.About the Role:We are seeking

Jacksonville, TX • (24.9 miles) • Full Time • 10/5/2026

Maintenance MechanicReports To: Maintenance Supervisor Department: Maintenance Location: Jacksonville FacilityPosition SummaryThe Maintenance Mechanic is responsible for performing preventive maintenance, corrective maintenance, troubleshooting, repair, installation, and improvement activities on manufacturing equipment, facility systems, utilities, and infrastructure. This position supports uninterrupted production operations by ensuring equipment reliability, minimizing downtime, and maintaining compliance with safety, quality, and regulatory requirements.The Maintenance Mechanic works closely with Production, Engineering, Quality, and Maintenance leadership to diagnose equipment failures, perform repairs, complete scheduled maintenance activities, and support continuous improvement init

Longview, TX 75604 • (30.1 miles) • Full Time • 10/5/2026

SUMMARYBuilds high quality steel structures; coordinates & manages personnel, and serves as liaison with General Contractor and other subcontractors under standards set forth by Basden Steel.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Directly supervises steel erection crew generally numbering 5-10 personnel.Working closely with the Project Manager, represents the Company to clients, general contractors, subcontractors and others with integrity and professionalism.Teaches and enforces Company policies and safety regulations.Preplans daily work activities in advance to accomplish the weekly plan set by the Project ManagerMonitors and evaluates performance and productivity of assigned workers, and leads them to achieve their best possible output

Longview, TX • (33.8 miles) • Full Time • 10/5/2026

Quick Lube Technician (Entry Level) – AutomotiveWhy wait to make a career out of doing what you love? Some of our best master technicians started as quick lube techs. So if working on cars gets your gears moving, contact us today. As a quick lube tech, you’ll start by being responsible for inspecting and lubricating vehicles quickly and thoroughly. And with a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options.Job ResponsibilitiesPerform multipoint inspectionsCommunicate additional service/repair needs to service advisorsService universal joints, grease fittings, and steering knuckles using hand- or compressed-air powered grease gunsInspect fluid levels in steering gears, power steering reservoirs, trans

Longview, TX • (33.8 miles) • Full Time • 10/5/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends.The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gre

Longview, TX 75601 • (35.6 miles) • Full Time • 10/5/2026

Nanny Goats is looking for a ROCKSTAR that can join our amazing team. You will need to have great customer service, and we will teach you the rest! Nanny Goats is a busy breakfast and lunch family owned and operated restaurant in Longview, TX. We are known for our AMAZING sandwiches and super amazing team.Kitchen staff needed from 6am-2pm and 8am-4pm with pay at $11/hrFront of House staff needs two shifts from 6am-2pm or 8am-4pm (We pay $10/hr with eligibility for tips.)Must have Texas Food Handlers Certification or able to obtain within 72 hours of employment.E-Verify StatementWills Investments Group participates in E-Verify, which is a service that allows us to confirm the employment eligibility of all new hires. All individuals who are offered employment will be required to provide docu

Tyler, TX • (0.8 miles) • Full Time • 10/4/2026

The Total Rewards Proposition: Competitive compensation paid weekly. Shop Mechanic I or II, Rate $20/hr. - $32/hr.Best-in-class; Medical, Dental, Vision, and LTD/STD.401(k) with company match, vested day-one.Employee Stock Purchase Plan [ESPP].Tuition Reimbursement.Paid Time Off, Holiday Pay, and Community Service Paid Time Off.Pet Coverage "For our Furry Friends"Legal Assistance CoverageAward winning safety programs.Overtime opportunities.Growth Opportunities.And more. The Position Proposition: Practice safety rules.Follow verbal and written instructions.Safe use of hand & power tools.Report to and assist immediate supervisor.Perform quality work as determined by project specifications.Accountable for all tools and materials at the end of your shift.Must work well as part of a team.Educat

Longview, TX • (33.8 miles) • Full Time • 10/4/2026

Lube Technician (Entry Level) – Toyota of LongviewWhy wait to make a career out of doing what you love? Some of our best master technicians started as quick lube techs. So if working on cars gets your gears moving, contact us today. As a quick lube tech, you’ll start by being responsible for inspecting and lubricating vehicles quickly and thoroughly. And with a little hard work and dedication, who knows where you’ll be able to go? At our dealership, the door is always open. And so are your options.Job ResponsibilitiesPerform multipoint inspectionsCommunicate additional service/repair needs to service advisorsService universal joints, grease fittings, and steering knuckles using hand- or compressed-air powered grease gunsInspect fluid levels in steering gears, power steering reservoirs, tra

Longview, TX • (33.8 miles) • Full Time • 10/4/2026

Service is one of the most important departments in a dealership. It is a key profit center with more people, facilities and equipment than any other department. It is also the key to the success of a dealership. If customers do not receive courteous, prompt and reliable service, it is unlikely that they will come back.Today's service technician job is more skilled and challenging than ever before. New cars and trucks are far more complex than they used to be, and a modern service bay is beginning to look like a science lab, with lots of expensive, sophisticated diagnostic and repair equipment, including computers.Automotive Technician Job Description TemplateOur company is expanding rapidly and we are looking to hire an Automotive Technician to join our team. You should have demonstrated

Tyler, TX 75701 • (0.2 miles) • Full Time • 10/3/2026

Automotive Technician Job DescriptionAAMCO Transmissions is the world’s leader in transmissions and complex automotive repairs. We are expanding at a rapid rate and looking for the best of the best in the industry. We are actively seeking Technicians in the areas of Transmission R&R, General Automotive Repair and Diagnostics. As an AAMCO Transmission employee we invest heavily in the growth of knowledge of our employees including ongoing training, investment in advanced equipment for servicing vehicles and much more. If you feel you’re ready for a new challenge, ready to grow your career with a nationwide industry leader then reach out to us now. Position Responsibilities:Inspect, diagnose and repair vehicle automotive systemsAssist other technicians in performing technical activitiesPerfo

Tyler, TX • (0.8 miles) • Full Time • 10/3/2026

Position Description: Lube TechnicianPosition Summary: Lube Technician is responsible for performing lube related services for customers in a professional and efficient fashion.Essential Duties and Responsibilities:Devote himself/herself to insuring satisfaction to customers.Determine management, production and quality requirements by asking questions and listening.Attend company meetings as required.Maintain a follow-up system that encourages follow through with assigned projects.Establish personal performance goals that are consistent with company standards of productivity and devise a strategy to meet those goals.Review and analyze actions at the end of each day, week, month, and year to determine how to better utilize time and plans more effectively.Understand the terminology of the bu

Tyler, TX 75703 • (6.1 miles) • Full Time • 10/3/2026

Job Summary:The Mechanical Engineer performs calculations, develops data sheets of equipment, prepares RFQ, and technical bid assessment. They generate technical clarification by interacting with vendors and suppliers to get the most optimum design according to project specifications, codes, and industry standards. They analyze technical issues and come up with cost effective design solutions to solve them.Responsibilities:Provide mechanical engineeringexpertisein theearly stagesof design and product developmentInvestigate and analyze complex mechanical design and construction problems for assigned projectsProvide technical review of mechanical engineering design calculations, analyses, drawings and specifications to ensure compliance with project objectives and standardsCollect and review

Henderson, TX • (31.3 miles) • Full Time • 10/3/2026

This is a manufacturing welding position - 40 hours a week, Saturday work as needed, time and a half overtime pay. Located in Henderson, Texas. We use horizontal and vertical turn tables with an adjustable speed for our products. Position would include testing, painting, packaging and assisting with inventory of the department in addition to welding. Looking to hire an experienced welder to join our TEAM - must pass a drug test and randoms if employed! Must also pass weld test before being hired. MIG WELDING, (TIG experience and Mechanical experience a plus) (Soldering a plus).

Athens, TX • (32.5 miles) • Full Time • 10/3/2026

Are you looking to join the car business? Consider joining the Brinson Auto Group team today! Our dealer, Brinson Ford of Athensis seeking an outstanding and friendly Service Advisor Assistant with excellent customer service skills. At Brinson we value and reward not only your skills but your effort too!Since first opening our doors in 1992, Brinson Auto Group has been serving the North Texas area as a top automotive group. We work hard to earn the respect and trust of our customers and take pride in providing a world-class shopping experience through sales, service, and parts.Brinson Auto Group Offers:Great PayMany benefitsOutstanding Work EnvironmentAdvancement OpportunitiesJob SummaryA LubeTechnician performs vehicle maintenance as assigned in accordance with dealer and factory standard

Longview, TX • (33.8 miles) • Full Time • 10/3/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016.Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations.Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes.Ensure the application of advanced quality tools to pr

Tyler, TX • (0.8 miles) • Full Time • 10/3/2026

About the company: Our client is a growing architecture firm in East Texas, focused on creating healthy, inspiring environments for commercial and residential clients.Position overview:Our client is seeking a detail-oriented Architectural Project Manager to lead and coordinate projects from concept through completion.This is a full-time, on-site role in East Texas.You will generate and manage construction documents in AutoCAD, oversee schedules and budgets, and guide projects through permitting, bidding, and construction administration.Key Responsibilities:Generate and manage architectural projects from concept through construction.Produce detailed construction drawings in AutoCAD.Coordinate with and review the work of assistant project managers and drafters.Lead projects through permittin

Flint, TX 75762 • (10 miles) • Full Time • 10/3/2026

Pneumatech | ETX – Flint, TXFull-Time | Starting at $35/hour, DOEPneumatech is looking for an experienced Auto Mechanic to join our ETX team and play an important role in keeping our company fleet safe, reliable, and on the road.This position will primarily focus on the maintenance and repair of our fleet of Ford, Chevrolet, and Dodge trucks, including both gas and diesel vehicles. Approximately 90% of the position will be dedicated to fleet maintenance, with occasional work on small equipment such as generators, backhoes, and other company equipment.The position is based at our ETX shop, with travel to our STX and WTX locations as needed when fleet issues arise.What You'll DoMaintain and repair Ford, Chevrolet, and Dodge trucks, including gas and diesel vehicles.Travel to our STX and WTX

Tyler, TX 75701 • (0.2 miles) • Full Time • 10/3/2026

Overview We're hiring several skilled, motivated Multi-Craft Maintenance Technicians in Tyler, TX. You'll keep our facility running smoothly by handling mechanical, electrical, and fabrication work across multiple trades. If you like troubleshooting and take pride in keeping equipment running, we want to hear from you. Text Maintenance to to apply with Express Employment Professionals in Tyler, TXResponsibilitiesComplete mechanical and electrical maintenance on facility systems and equipment.Troubleshoot and repair mechanical systems, electrical systems, and PLCs.Run inspections, find root causes, and put lasting fixes in place.Do preventive maintenance on schedule and close out computerized work orders.Repair and maintain forklifts.Weld, cut, and fabricate equipment and parts as needed.Us

Palestine, TX 75801 • (43.1 miles) • Full Time • 10/3/2026

Test the Product. Protect the Quality. Support Operational Excellence. Verdant Specialty Solutions is seeking a Quality Control Technician to support product quality, process consistency, and operational excellence at our Palestine, Texas facility. This role is responsible for inspecting and testing raw materials, in-process products, and finished goods to ensure compliance with company specifications, customer requirements, and applicable quality standards. You will work closely with operations, production, and plant leadership teams to conduct laboratory testing, maintain quality records, support continuous improvement initiatives, and help ensure products are manufactured right the first time. This role is based on-site at our manufacturing facility. Why This Role Is a Fit for You:Make

Tyler, TX 75703 • (6.1 miles) • Full Time • 10/2/2026

Benefits:Bonus based on performanceOpportunity for advancementPaid time offTraining & developmentJoin a Growing Team | Build a Career | Make an Impact Voda Cleaning & Restoration is seeking a skilled and motivated Technician with 1–2 years of experience in carpet & upholstery cleaning, air duct cleaning, mold remediation, and/or water damage restoration. We're building a high-performing team committed to excellence, and we need driven individuals who are ready to grow with us, contribute to meaningful work, and take pride in delivering outstanding customer service from day one. Why Join Us?PTOPerformance BonusPaid Training & Certifications (IICRC's WRT, CCT, AMRT, etc.)Quick Advancement & Growth OpportunitiesOpportunity to build the business alongside leadershipSupportive, Team-Oriented Cu

Tyler, TX 75707 • (7.3 miles) • Full Time • 10/2/2026

Benefits:Competitive salaryFlexible scheduleOpportunity for advancement Fish Window Cleaning is the largest window cleaning company in the country, and we're growing our Tyler territory. We're hiring an Estimator to be the face of Fish out in the field. This is not a phone job and it is not a closing job. Your work is to visit commercial properties in person, walk the building, assess the glass, and write an accurate estimate on the spot. You gather opportunities. You are not responsible for chasing signatures. If you'd rather be outside meeting business owners than sitting at a desk, this fits. What You'll DoVisit commercial businesses around Tyler in person retail strips, restaurants, offices, storefrontsIntroduce Fish Window Cleaning and ask for the decision-makerWalk each property, ass

Tyler, TX 75706 • (10 miles) • Full Time • 10/2/2026

SNELLING is currently recruiting for a CNC Machinist for a manufacturing company in the Tyler area with a pay rate of $18.00 to $32.00/hr. Schedule is Monday-Friday during standard day shift hours. We are seeking an independent proactive CNC Machinist to set up, operate, and adjust CNC mills and lathes to produce precision components. This role requires strong attention to detail and the ability to work efficiently with minimal supervision. Key Responsibilities: Set up, adjust, and operate CNC mills and lathes to machine parts to specifications.Measure finished workpieces using precision instruments (micrometers, calipers, gauges) to ensure conformance.Mount, install, and align tools, fixtures, and workpieces using hand tools and precision measuring instruments.Stop machines to remove fini

Kilgore, TX 75662 • (24.8 miles) • Full Time • 10/2/2026

DescriptionJob Summary: This position is responsible for performing moderate manufacturing weld fabrications of various products and components. The MFG Welder 3 demonstrates proficiency as a welder and fabricator in the following of established procedures and guidelines; understanding drawings and blueprints, adhere to the standard procedures in the use of equipment when engaging in any fabrication processes. Able to work independently or as a member of a team to provide fabrication services that satisfy customer needs and achieve departmental goals.Mid-level position – Generally has a minimum of four years of experience and/or demonstrated job relevant knowledge/skills and has obtained welding certifications in the FCAW and GMAW welding processes (1-4 G/F). The MFG Welder 3 has moderate

Longview, TX 75604 • (30.1 miles) • Full Time • 10/2/2026

Benefits:Competitive salaryHealth insurancePaid time offJob Summary: We are seeking a skilled and experienced Commercial Refrigeration Installer to join our team. The ideal candidate will be responsible for installing commercial refrigeration systems in various settings. Benefits/PerksCompetitive pay based on experience.Health, dental, life and vision insurance.Paid time off (PTO).401(k) retirement plan with company match.Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:Install commercial refrigeration systems, ensuring proper operation and compliance with safety standards.Perform diagnostic tests and troubleshoot systems during installation.Conduct routine inspections and maintenance to prevent malfunctions.Adhere to safety protocols and local/