Please Accept our Privacy Policy
Applied Metallurgical
Longview, TX • (39.4 miles) • Full Time • $16.50 to $17.50 / hr • 10/20/2026
Applied Metallurgical is seeking a dependable, hardworking Molding Team Member to help produce the molds used to manufacture iron castings. This entry-level position offers hands-on training and room to take on greater responsibility as your skills develop. No prior foundry experience is required. Bring a willingness to learn, a strong work ethic and a commitment to working safely. Job Duties Include: Prepare patterns, flasks, and molding equipment for production. Assist with filling, compacting, and preparing sand molds. Apply mold coatings and perform finishing work according to established procedures. Position cores and assist with assembling and closing molds. Inspect molds for damage or defects before pouring. Stage completed molds and materials to support the production schedule. Kee
Applied Metallurgical
Longview, TX • (39.4 miles) • Full Time • $16.50 to $18.50 / hr • 10/20/2026
Applied Metallurgical is looking for a Melt Technician who’s not afraid of hard work and heat. This is a hands-on role working directly with molten metal, induction furnaces and heavy equipment to keep production moving safely and efficiently. All safety wear is provided. Job Duties Include: Work with the plant metallurgist to build and charge melts Weigh alloys and scrap for furnace charges Run coreless induction furnaces, pumps, and cooling systems Take molten metal samples and pour heats using overhead cranes Repair and maintain refractory in furnaces and ladles Qualifications: Forklift certification or experience Bobcat / skid-steer experience preferred Safety-first mindset with experience around molten metal Solid math skills for charge calculations Comfortable using hand tools
Applied Metallurgical
Longview, TX • (39.4 miles) • Full Time • $25.00 / hr • 10/20/2026
Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform weld
Applied Metallurgical
Longview, TX • (39.4 miles) • Full Time • $16.00 / hr • 10/7/2026
Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and report
Applied Metallurgical
Longview, TX • (39.4 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benefits: Only
Applied Metallurgical
Longview, TX • (39.4 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026
Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic machAtlas Field Services
Marshall, TX 75670 • (21.8 miles) • Full Time • 11/18/2026
\n \n Who You Are: \n You’re energetic and enjoy working outdoors. You understand that this space can be demanding, and you are equipped with the skills necessary to get the job done. You have at least seven years of combined experience. Bachelor’s degree with 3 years of field experience. Associate degree with 5 years’ experience. 7 years of utility vegetation management experience. \n We’re dedicated to the growth of our employees . We truly believe in your development. For those who show initiative, we will do what it takes to get you where you want to go. \n We’re growing but still maintain an entrepreneurial spirit . We give you room to be accountable and responsible in your role. We believe progress is bred through innovation and we encourage our employees to bring their ideas forwardParamount Inc.
Shreveport, LA 71107 • (14.5 miles) • Full Time • $55,000 to $80,000 / yr • 11/18/2026
Build Precision. Shape Quality. Star Swiss Turning Technician – Shreveport, LA If driving accuracy and throughput on Swiss machines is your craft, this role puts your skills at center stage. You’ll guide multiple machines, tune process variables, and ensure every part meets specall while keeping safety and quality nonnegotiable. Your Impact Take responsibility for 3–4 CNC Swiss screw machines from startup to shutdown Own setups , tool changes , offsets , and program edits to stabilize quality and cycle times Load material, including through bar-feeding systems, and monitor production Verify dimensions with calipers , gauges , and micrometers to maintain ISO standards Troubleshoot mechanical and quality issues promptly and uphold safe practices What You Need to Succeed 1+ year CNC Swiss macPlain Dealing Lumber
Plain Dealing, LA 71064 • (37.3 miles) • Full Time • $25.00 to $35.00 / hr • 11/18/2026
The Millwright is responsible for installing, aligning, maintaining, troubleshooting, and repairing industrial machinery and mechanical equipment throughout Plain Dealing Lumber's sawmill and planer operations, including conveyors, saws, motors, gearboxes, bearings, and hydraulic and pneumatic systems. This role is critical to minimizing unplanned downtime and keeping mill equipment running safely and efficiently. The Millwright works closely with the Maintenance Manager and other maintenance personnel to perform both scheduled preventive maintenance and emergency repairs. ESSENTIAL DUTIES & RESPONSIBILITIES • Install, align, and level industrial machinery and equipment, including conveyors, saws, chippers, planers, motors, and gearboxes. • Diagnose mechanical problems and perform repairsFulcrum Careers
Shreveport, LA 71129 • (10.1 miles) • Full Time • 11/17/2026
Description: As a Data Center Quality Inspector I, you provide superb quality control services for our clients. The work includes performing essential inspections of electrical equipment and systems, such as switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections and interpret electrical drawings and specifications. You will ensure the equipment and technicians around you comply with company and site safety requirements. You prepare detailed daily reports about your findings, including time tracking and special inspection reports. With diligence, you review, approve, and submit essential documentation, including Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients recPrysmian
Marshall, TX 75670 • (21.8 miles) • Full Time • 11/17/2026
Quality Manager Location: Marshall, TX Employment Type: Full Time | On-site Why Build Your Career with Prysmian? Your work at Prysmian helps power and connect the world. When you join Prysmian, you become part of a global team whose work touches millions of lives every day. You’ll help support the energy and digital infrastructure that keeps communities, businesses, and industries moving forward. For more than 140 years, Prysmian has helped shape the infrastructure that powers progress. From helping illuminate the Statue of Liberty in 1886 and delivering power from Hoover Dam to Los Angeles in 1935, to supporting New York City's rebuilding efforts after September 11, our cables and connectivity solutions have played a role in some of history's most significant milestones. Today, our impactGordon, Inc.
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/17/2026
Benefits: 401(k) Dental insurance Health insurance Paid time off EDUCATION & EXPERIENCE: · Bachelor of Science Degree in Mechanical Engineering, Industrial Engineering, Civil Engineering, or Civil Technology, OR equivalent work experience. · 1 – 5 years of manufacturing experience and/or construction management experience is preferred but not required. Working in a metal manufacturing environment is a plus. · Proficiency with fully integrated computer systems, with relevant experience in Bill of Material (BOM) Development, Materials Requirement Planning, working knowledge of Computer Aided Design (CAD) software, FEA (Nastran and Cosmos), reading and interpreting Architectural Drawings, and mastery of traditional Engineering functions. · Knowledge of FMEA (Failure Mode and Effect Analysis),NABRICO Marine Products
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/17/2026
NABRICO – Marine Components is seeking a Sales Project Engineer for our Bossier City, Louisiana location. This position will oversee the sales, engineering, and execution of projects involving our marine component product offerings. The Sales Project Engineer will work directly with customers and internal teams to develop solutions, manage project requirements, support technical design and engineering activities, and identify opportunities for business growth. This role will also play an important part in developing new products and improving existing product lines to support the evolving needs of the marine industry. NABRICO – Marine Components is based in Bossier City, Louisiana, and specializes in providing a wide range of marine hardware, winches, deck fittings, and engineered equipmenCoolSys
Shreveport, LA 71129 • (10.1 miles) • Full Time • 11/17/2026
Overview \n WHY COOLSYS? \n At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: \n\n \n Competitive Compensation: $28-50/HR DOE \n Sign on Bonus : Up to $5,000.00 DOE \n Ongoing Education & Training: Access to state-of-the-art facilities and paid online training. \n Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match. Enroll in Medical Coverage Starting at $0 Per Paycheck! \n Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systeRNR Tire Express
Bossier City, LA 71112 • (24.9 miles) • Full Time • 11/17/2026
Description: RNR Tire Express is a national franchise retailer that provides safe, quality tires and wheels with affordable payment options. At RNR we have built a culture around “SERVING our customer and not just providing them customer service”. We support and empower our employees with excellent training and tools which enables them to provide our customers with a unique and exceptional experience. RNR Tire Express started as a family business over 20 years ago in a small shop located in Tampa, Florida. Since then, we have grown to over 160 stores across 26 states, and continue to open more locations across the country each year. While we have expanded far beyond that little shop in Tampa, we have never lost our core value of FAMILY . At RNR, we believe having a healthy work / life balaTovya Group Inc
Longview, TX • (40.8 miles) • Full Time • $12.00 to $18.00 / hr • 11/17/2026
Electronics Assembler – Job Description Job Category: Production Employment Type: Full-Time Essential qualifications and skills include a strong reasoning ability and working experience using Microsoft Word and Excel. Excellent communication skills are required for work in a team environment and interaction with coworkers and customers. *** This job requires Excellent manual dexterity and hand/eye coordination**. Job Responsibilities Hand placement of components on circuit board (thru-hole or surface mount) Form parts according to specifications, using pliers, calipers, cutters, and forming tools Read and understand electronic schematics, work orders and assembly instructions Record data onto work orders or shop traveler Inspect to detect malfunctions, and ensure conformance to specificatiEast Texas Cooling Systems
Longview, TX 75604 • (44.6 miles) • Full Time • $27.00 to $40.00 / hr • 11/17/2026
Benefits: 401(k) Competitive salary Health insurance 401(k) matching Dental insurance Paid time off Job Summary: We are seeking a skilled and experienced Commercial Refrigeration Technician to join our team. The ideal candidate will be responsible for installing, maintaining, and repairing commercial refrigeration systems in various settings such as supermarkets, service stations, and industrial facilities. Benefits/Perks Competitive pay based on experience. Health, dental, vision, supplemental and life insurance. Paid time off (PTO). 401(k) retirement plan with company match. Company-provided vehicles, some tools, and phone allowance for work purposes. Responsibilities: Install, repair, and maintain commercial refrigeration systems. Diagnose and troubleshoot mechanical failures in HVAC anDXP
Bossier City, LA • (23.4 miles) • Full Time • 11/16/2026
Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more!http:/Resource Energy Equipment
Shreveport, LA 71106 • (20.2 miles) • Full Time • 11/15/2026
Hiring: Experienced Frac Technician (Supervisor or Shop Lead) Located: Shreveport, Louisiana Company: Resource Energy Equipment REE is seeking a well-seasoned Frac Technician to join our team in Shreveport, LA. We have our sights set for a skilled professional with strong diagnostic abilities and hands-on experience working on Frac equipment. Qualifications: • Extensive experience with CAT Tier 2, Tier 4, MTU4000, and CUMMINS engines • Strong knowledge of power ends (GD, SPM, Valvetech, etc.) • Experience with transmissions (CAT, Twindisc, Allison, etc.) • Proficient in electronic controls (MDT, CAT, etc.) • Ability to diagnose and troubleshoot mechanical and electrical systems Responsibilities: • Servicing and maintaining rental equipment to ensure proper operating conditions • SupportingExpress Employment Professionals - Shreveport
Shreveport, LA 71107 • (14.5 miles) • Full Time • $20.00 to $26.00 / hr • 11/14/2026
CNC Machinist \n Shreveport, LA \n $20-$26/hr DOE \n Monday-Friday | 6:00 AM - 3:00 PM \n Benefits: Full Benefits package offered \n We are hiring a CNC Machinist for a growing manufacturing team in Shreveport, LA. Candidates should have experience operating and calibrating CNC equipment, reading blueprints, and producing quality parts in a production environment. Higher pay may be considered for highly qualified candidates. \n Responsibilities \n \n Set up, operate, and calibrate CNC mills and/or lathes \n Read and interpret blueprints and technical drawings \n Inspect finished parts using measuring tools \n Perform basic machine maintenance and troubleshooting \n Maintain production schedules and quality standards \n Follow all safety procedures and keep work areas organized \n \n QualifGenerator Supercenter Of Shreveport
Shreveport, LA 71105 • (20.7 miles) • Full Time • $16.00 to $20.00 / hr • 11/14/2026
Benefits: 401(k) 401(k) matching Bonus based on performance Dental insurance Health insurance Paid time off Training & development Vision insurance Company car Generator Mechanic - A/C Service Technician Full-Time | Monday–Friday | Company Vehicle Provided Location: {Shreveport and surrounding area} Power Up Your Career with Generator Supercenter Generator Supercenter, Inc. is the #1 provider of home standby generators and a leader in renewable energy solutions. We’re on a mission to help homeowners stay safe, secure, and powered through cutting-edge backup power systems and clean energy technologies. We are hiring a dependable and skilled Generator Mechanic - A/C Service Technician to join our growing team. This field-based role is ideal for candidates with mechanical and electrical repaiHobart Services
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/14/2026
SUMMARY Service/Repair Technician 3 possesses in depth knowledge and has demonstrated mechanical, electrical, pneumatic, gas, and/or refrigeration (HVACR) aptitude with complex troubleshooting experience. Responsible for providing on-site support to Hobart Service customers that includes but is not limited to: installation and/or service of commercial food equipment. Routine work schedule including on-call, after-hours, holiday, and weekend on-site repair support. ESSENTIAL DUTIES AND RESPONSIBILITIES FOR ALL TECHNICIAN LEVELS These are the most significant job duties performed. The size, scope and complexity of assigned duties and responsibilities are dependent on the level and experience of the incumbent. To perform this job successfully, an individual must be able to perform each assignSystem One
Longview, TX 75602 • (34.6 miles) • Full Time • 11/14/2026
Job Title: Manager, Production Location: Longview, Texas Direct Hire Relocation- Open Compensation: $110,000 - $165,000 Work Model: Onsite Overview System One is in search of a Production Manager for a privately held company to join their team in Longview, TX. This position is responsible for overseeing daily manufacturing operations to ensure safety, quality, efficiency, and on-time delivery. If you are interested in this opportunity, please apply directly, or reach out to Philis Tindell at Responsibilities Oversee daily manufacturing operations to ensure safety, quality, efficiency, and on-time delivery. Lead and supervise production teams to meet daily, weekly, and monthly output targets. Monitor production schedules and adjust resources to ensure timely delivery. Enforce safety protocoAddison Group
Longview, TX • (40.8 miles) • Full Time • 11/14/2026
Role: Production Manager Location: Longview, TX Salary: $120,000 - $130,000 Benefits: This role is eligible for medical, life and disability insurance, PTO, 401k. Summary: This role is responsible for overseeing the direction and performance of a key operational area, ensuring strong output, efficiency, and team effectiveness. The position focuses on optimizing production processes, supporting strategic initiatives, and maintaining alignment with organizational goals. The manager is accountable for improving operational workflows, enhancing productivity, and ensuring consistent execution across the department. This includes identifying opportunities for process enhancements and implementing solutions that drive measurable performance gains. In addition, the role supports financial planningDNC Facility Services
Carthage, TX 75633 • (27.2 miles) • Full Time • $18.00 / hr • 11/14/2026
$18/hr - $22/hrTraining & Quality Specialist (Janitorial QC / Field Trainer) \n DNC Facility Services · Full-time · $18/hr - $22/hr · Ark-La-Tex area, travel between sites required \n Schedule: Monday–Friday, evening shift (2:00–10:30 PM) Weekends off. \n Why This Job Is Different \n Love teaching people how to do it right? Tired of being the one who covers every call-out? This one's for you. \n DNC Facility Services has been cleaning commercial buildings since 1982, and we're growing fast. We just built a brand-new training standard, and we need someone to bring it to life across every site we clean. \n This isn't a cleaning job, and it's not a fill-in role. You'll be the person who trains our trainers. You'll certify our Team Leads and senior techs, coach them in the field, and make sureEnpro
Longview, TX • (40.8 miles) • Full Time • 11/14/2026
Job Title: Product Technician I – Rubber Molding Job Code: 809003 – Prod Tech II Reports to: Operations Supervisor Segment: Seal Division: STEMCO Site Name: Longview Employee Type: Regular Full Time FLSA Status: Non-Exempt EEO-1 Job Category: Operators Remote, Hybrid, Onsite: Onsite The Product Technician I – Rubber Molding role is responsible for supporting day-to-day production operations within the Rubber Molding department. This role is an integral part of a high-performing production team and is expected to operate molding equipment, follow standard work, and ensure product quality through effective inspection and defect detection. This position requires a strong commitment to safe work practices, quality standards, and continuous improvement, while contributing to a collaborative andAlfred H Knight Group
Longview, TX • (40.8 miles) • Full Time • 11/13/2026
WHAT IS ON OFFER \n Alfred H Knight has an opportunity for a General Inspector to work with our Inspection team, based in the Longview, Texas area. You will be responsible for ensuring client instructions are carried out at agreed consignment locations, acting as an independent party to verify compliance with agreed processes and inspection and supervision procedures and providing details to clients regarding the handling of their product/s. \n ABOUT US \n Alfred H Knight is a totally independent, family owned business spanning five generations. A global network of strategically placed offices and laboratories enable global trade by providing independent inspection, analysis and consultancy services to the metals and minerals, solid fuels and agriculture industries. \n We have honed & careHalliburton
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/13/2026
We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry. Job Duties and Qualifications Depending on the job location, lodging, and rotating schedule may be provided. Under supervision, delivers Product Service Line (PSL) equipment to wellsite Provides proppant handling services, manifolding rig-up and tanks measurement during the job Learns basic operations to include but not limited to: Performing pre/post job equipment inspections Performing and completing preventative maMcElroy Metal Mill Inc
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/13/2026
About McElroy Metal McElroy Metal is a leading manufacturer of metal roofing, metal siding and sub-structural components with 14 manufacturing facilities, 28 Service Centers and 44 Metal Mart locations across the US. After three generations of family ownership, McElroy transitioned to an employee-owned company (ESOP) in 2023 . Ian McElroy, who continues to serve as the President of McElroy Metal, shared the reason for the change, "The one constant trait during our 60-year history is the influence and support of employees. Throughout the country, McElroy Metal is blessed to have loyal team members, including many that have dedicated decades of service to the company. As a show of appreciation, McElroy Metal team members are now employee owners of McElroy Metal.” Benefits Employee Stock OwneGRAYWOLF INTEGRATED CONSTRUCTION COMPANY
Hallsville, TX 75650 • (28.6 miles) • Full Time • 11/12/2026
GrayWolf is seeking a Project Controls Engineer in Hallsville, TX - This is an On-Site Role with Competitive Pay, Paid Time Off, Per Diem Eligible >60-miles GrayWolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating aConterra Ultra Broadband
Longview, TX 75601 • (38.5 miles) • Full Time • 11/12/2026
Outside Plant Tech I Job Type: Full Time DUTIES AND RESPONSIBILITIES: • Assist in the day-to-day tasks associated with outside plant fiber network deployment and operations, including construction management, progress reporting, maintenance and record keeping. • Assist in preparation and splicing of fiber enclosures, fiber panels, bonds/grounds and test fiber optic equipment to division standards. • Assist in Perform ring cuts, butt-splices, enter splice cases on live fiber without affecting existing services; both aerial and underground • Help perform fiber tests with OTDR’s, visible light source and meters. • Assist in the installation of fiber optic communication equipment and Inside plant patch panels. • Install aerial and underground enclosures and other fiber related telecom equipmenAmerican Industrial Transport
Longview, TX 75604 • (44.6 miles) • Full Time • $26.44 to $29.81 / hr • 11/12/2026
Job Summary Entry-level Quality Inspector training for performing basic in-process and final inspections under supervision while developing knowledge of AAR, FRA, customer, and company requirements. Job Duties Inspection Activities Train to Perform assigned in-process inspections. Train to Perform assigned final inspections. Train to Verify work completed meets work order requirements. Train to Verify required repair procedures were followed. Train to Inspect repaired railcars for obvious defects and non-conformances. Train to Complete inspection documentation accurately and legibly. Train to Verify required forms are complete before railcar release. Quality Documentation Train to Complete inspection reports. Train to Record defects and discrepancies. Train to Maintain inspection records.LEGIT PRODUCTIONS LLC
Longview, TX 75601 • (38.5 miles) • Full Time • $1,200 to $6,000 / mo • 11/12/2026
LEGIT PRODUCTIONS LLC Texas Division PIT Crew (Production Intake Team) About the PIT Crew The Production Intake Team (PIT Crew) is the creative and operational support team within Legit Productions LLC. PIT Crew members help transform opportunities generated by our Client Sourcing Agents (CSAs) and Division leadership into organized, professional production projects. As Legit Productions continues expanding across multiple markets, the PIT Crew plays an important role in helping us maintain quality, organization, creativity, and professionalism as our project volume increases. This is an opportunity for creatives and production-minded professionals who want to grow with an expanding media company and potentially take on greater responsibilities as the organization develops. Core ResponsibiHeaton Eye Associates
Longview, TX • (40.8 miles) • Full Time • 11/12/2026
Job Summary: \n Provides individualized and specialized nursing care to patients in the ambulatory surgery center (ASC) in accordance with physician’s orders, recognized nursing standards, legal aspects of current nurse practice within the state, federal, and the ASC’s policies and procedures. Functions cooperatively with physicians and staff exhibiting teamwork characteristics. Demonstrate initiative, insight and judgment in decision-making process. \n About the Practice: \n The physicians of Heaton Eye Associates have been serving East Texas’ vision needs for over 40 years. We offer state-of-the-art technology with special services ranging from primary eye care to world-class laser surgery. Our physicians were the first to offer LASIK laser vision correction in East Texas and have perforModule X Solutions
Shreveport, LA 71106 • (20.2 miles) • Full Time • $75,000 to $80,000 / yr • 11/11/2026
Benefits: Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources 401(k) 401(k) matching Bonus based on performance MODULE X SOLUTIONS is a rapidly growing modular manufacturing business that serves marquee corporate and government customers in renewable energy, network infrastructure, battery storage, telecommunications, petrochemical, utility, transportation, and other verticals. We design, engineer, and manufacture products to our customers’ specifications. We are a proud Shreveport-based company working to support our employees and our community. Check us out at www.ModuleXSolutions.com, and we hope you will consider applying to build your career and future at MXS! SCHEDULE Monday–Friday, 2:30 PM – 10:30 PM. You will attendFresh & Ready Foods
Longview, TX 75602 • (34.6 miles) • Full Time • 11/11/2026
We are hiring immediately for a full time QUALITY ASSURANCE TECHNICIAN position. Location : Fresh & Ready FG TX - 2002 East Cotton Street, Longview, TX 75602. Note: online applications accepted only. Schedule : Full time schedule. Days may vary, 6:00 am to 4:30 pm. Availability to work weekends required. Further details upon interview. Requirement : Previous quality assurance, lot coding, and food quality experience required. Fixed Pay Rate: $15.00 per hour. *Internal Employee Referral Bonus Available Please note that employees in this role will work in a temperature-controlled environment with exposure to cold conditions for extended periods of time. We Make Applying Easy!Just text JOB to 75000 & search for the requisition ID number1570694. The advertised program is a conversational recruDelta Utilities Services, LLC
Shreveport, LA • (15.7 miles) • Full Time • 11/11/2026
JOB SUMMARY/PURPOSE \n Delta Utilities is seeking a Material Planner who will be responsible for managing material requirements, ensuring availability of components, and coordinating with suppliers, procurement, and production teams. This role is critical to maintaining on-time delivery, cost efficiency, and operational excellence. \n ACCOUNTABILITIES AND ESSENTIAL FUNCTIONS \n \n Develop and manage material requirements plans based on production schedules, forecasts, and/or inventory requirements. \n Monitor inventory levels and initiate purchase requisitions to maintain optimal stock. \n Collaborate with procurement, suppliers, and production to resolve shortages, delays, or quality issues. \n Track material flow to ensure timely availability for manufacturing operations. \n Analyze dataCareer Adventures
Shreveport, LA • (15.7 miles) • Full Time • $18.00 to $27.00 / hr • 11/10/2026
Assembly and Test Operator Job Description The Assembly and Test Operator is responsible for assembling and testing products, and for troubleshooting and resolving issues. Roles and Responsibilities: · Assemble components of all products, selecting the correct tools and fixtures. · Test assembled products. Troubleshoot and resolve problems associated with the assembly and testing of products. · Read blueprints; identify components; use pertinent tools and rework techniques; operate equipment, dimensioning and setting tolerances of mechanical parts and assemblies. · Create labor records for all transactions. · Ensure good housekeeping within own work area. · Take personal responsibility for safety and adhere to relating Risk Assessments. · Use the guiding principles and tools of the ManufacLifetime Recruitment Solutions
Shreveport, LA • (15.7 miles) • Full Time • $125,000 to $160,000 / yr • 11/9/2026
Mechanical Engineer – Product Development \n Northwest Louisiana | $125K–$160K Base \n\n We’re recruiting for a privately owned oilfield equipment manufacturer in Northwest Louisiana that is looking for an experienced Mechanical Engineer to join its product development team. \n This is not a maintenance-engineering role and it is not a position where you’ll spend your career making minor revisions to someone else’s drawings. \n The company designs and manufactures its own engineered mechanical products, and this engineer will ultimately be involved in taking products from concept design prototype testing manufacturing field use . \n\n The company has been in business for more than 40 years, is financially strong, privately owned, and continues to invest heavily in engineering, manufacturinArnold Family Of Restaurants, LLC
Greenwood, LA 71033 • (4.3 miles) • Full Time • 11/9/2026
Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut team member, you can be the smiling face that greets and serves the customers, or a cook who make things happen in the kitchen. Working with us will give you the financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime. WHAT ARE WE LOOKING FOR? The good news is that your training will teach you everything you need to know to succeed on the job. But there are a few skills you should have from the get-go: You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – youPlain Dealing Lumber, LLC
Shreveport, LA 71101 • (18.6 miles) • Full Time • $25.00 to $35.00 / hr • 11/9/2026
JOB SUMMARY \n The Millwright is responsible for installing, aligning, maintaining, troubleshooting, and repairing industrial machinery and mechanical equipment throughout Plain Dealing Lumber's sawmill and planer operations, including conveyors, saws, motors, gearboxes, bearings, and hydraulic and pneumatic systems. This role is critical to minimizing unplanned downtime and keeping mill equipment running safely and efficiently. The Millwright works closely with the Maintenance Manager and other maintenance personnel to perform both scheduled preventive maintenance and emergency repairs. \n \n ESSENTIAL DUTIES & RESPONSIBILITIES \n \n • Install, align, and level industrial machinery and equipment, including conveyors, saws, chippers, planers, motors, and gearboxes. \n • Diagnose mechanicalGlobal Solutions International, LLC
Bossier City, LA 71110 • (25.4 miles) • Full Time • 11/7/2026
Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance Location: One of five AFGSC CONUS installations (Barksdale AFB, LA (2 BW/2 OG, B-52); Minot AFB, ND (5 BW/5 OG, B-52); Whiteman AFB, MO (509 BW/509 OG, B-2); Dyess AFB, TX (7 BW/7 OG, B-1); or Ellsworth AFB, SD (28 BW/28 OG, B-1)) Schedule: Full-Time Clearance: Secret (active or previously held/expired, not revoked) Contract Status: Optional CME position funded only if the Operations Group elects to fund additional Wing Scheduling support and if funding becomes available Position Overview Global Solutions International is seeking a Wing Scheduler to provide unit-level, long-range scheduling support to an AFGSC bomber Operations Group as an optionaNCW
Shreveport, LA • (15.7 miles) • Full Time • 11/7/2026
\n Metallurgist – Shreveport , LA \n \n \n Pay Rate: $75,000-$105,000 per year, based on experience\n \n \n Schedule: 7:00am-4:00pm\n \n \n Job Type: Direct Hire\n \n \n Application Period: This position will remain open until filled\n \n \n \n \n \n \n \n \n Position Summary: \n \n \n \n \n \n The Metallurgist provides technicalexpertiseand support to Quality and Engineering by evaluating material properties, analyzing test results, investigating product failures, and supporting heat treatment and welding processes. This position oversees laboratory testing activities, ensures product compliance with applicable requirements, and works with manufacturing teams to improve quality, consistency, and process performance.\n \n \n \n \n \n Responsibilities: \n \n \n Provide metallurgical supportE Tech Group
Longview, TX • (40.8 miles) • Full Time • 11/6/2026
At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control sysVolkert Inc
Shreveport, LA 71118 • (16.2 miles) • Full Time • 11/6/2026
Are we the road to your future? We are currently seeking an experienced CEI Inspector to support our Southwest Region, based in New Orleans, LA . Additional locations under consideration include Baton Rouge, Monroe, and Shreveport, LA. To be considered for this position, applicants must have, at minimum, 1 year of progressive inspection level experience What you’ll be doing: Inspection for compliance with contract documents, standards, and specifications Testing of materials and review of plans Keeping daily diaries on project operations, resolves daily constructability issues and trouble shoots problems to mitigate delays to contractor’s progress Monitors contractor's daily operations and performs and/or reviews test reports to ensure that all work and materials conform to specifications,Jean Simpson Personnel Services
Shreveport, LA 71105 • (20.7 miles) • Full Time • $20.00 to $24.00 / hr • 11/6/2026
\n Precision Quality Assurance Inspector\n Location: Shreveport, LA \n Employment Type: Full-Time \n Schedule: Day or night shift \n \n A day in this role\n As production hums on the floor, you move between stations with a calibrated eye. You receive a lot number of incoming components, verify paperwork, and compare samples to specifications and blueprints. A micrometer clicks into place as you confirm a dimension; a CMM program runs to validate a critical feature. You record measurements, flag a potential nonconformance, and partner with the line lead to isolate suspect product. By shift’s end, your reports are complete, packaging is verified against labels and work orders, and the area is organized and safeready for the next build. \n What you’ll do\n \n Examine raw materials, in-processArrowhead Contracting, INC.
Bossier City, LA 71110 • (25.4 miles) • Full Time • $80,000 to $120,000 / yr • 11/6/2026
Arrowhead Contracting, Inc. has an exciting opportunity for skilled professionals to join our team. We are currently looking for a full-time Quality Control Manager to support our federal construction and renovation projects at various military bases in the southeastern US. We offer our Quality Control Managers a salary of $80,000 - $120,000/year , and we support earning licenses ! Plus, our team enjoys great benefits and perks , such as: PTO Bonus structure Health insurance 401(k) Growth opportunities Company shirts Per diem Normal hours of onsite operations are Monday - Friday, 7:00 am - 4:00 pm . WANT TO KNOW MORE ABOUT US? Headquartered in Florida, Arrowhead Contracting, Inc. is focused on completing comprehensive construction services in the public and private sectors. From site utiliElevate Human Capital
Shreveport, LA 71107 • (14.5 miles) • Full Time • 11/5/2026
Shreveport, Louisiana | Salaried position Elevate Human Capital (EHC) is seeking a Heat Treat & Lab Metallurgist for a manufacturing opportunity in the Shreveport, LA area. This position supports product quality, metallurgical testing, heat-treatment processes, failure analysis, and laboratory operations. Overview Investigate product and laboratory testing failures, identify root causes, and prepare technical findings for internal teams and customers. Support and define heat-treatment conditions, welding processes, and related metallurgical process controls. Oversee onsite laboratory testing, calibration activities, laboratory personnel, and coordination with external destructive-testing providers. Review product conformity, material sources, and supporting documentation to maintain applicGSS Construction & Oilfield Supply
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/3/2026
Benefits: 401(k) matching Competitive salary Dental insurance Health insurance Now Hiring - Fabrication Specialist MIG Welding & Pipe Fitting Read Drawings & Blueprints Fabrication & Assembly Quality & SafetyJ.Riley Recruitment
Longview, TX • (40.8 miles) • Full Time • 11/3/2026
Commercial Refrigeration InstallerPosition Overview\n Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends. \n The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carryiPatterson Marshall Chrysler Dodge Jeep
Marshall, TX • (17.2 miles) • Full Time • 11/3/2026
Service Technician position. \n TO APPLY - PLEASE USE THIS LINK! We may not receive your application if you do not utilize THIS link: \n https://patterson-marshall-chrysler-dodge-jeep.verahr- hiring.com/job/98170/service -technician \nHotRun Inc.
Longview, TX • (40.8 miles) • Full Time • $90,000 to $115,000 / yr • 11/2/2026
\n Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016. \n\n Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations. \n Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes. \n Ensure the application of advanced quEpic Canning And Bottling Inc
Shreveport, LA 71108 • (16.3 miles) • Full Time • $18.00 to $25.00 / hr • 11/1/2026
Description: Mechanical Technician supports Epic's day-to-day operations of our production lines by ensuring all mechanical systems run efficiently with minimal downtime. Requirements: Duties and Responsibilities (including but are not limited to): Perform routine preventive maintenance (PM) on production and packaging equipment. Adhere to SOP, SSOP, GMP, and HACCP guidelines. Diagnose and repair mechanical faults to minimize downtime. Support line changeovers and adjustments to meet production requirements. Inspect and maintain mechanical components such as: Bearings, chains, belts, gear systems, and pneumatic parts. Ensure smooth operation of conveyor systems and moving equipment. Conduct regular inspections and identify potential issues proactively. Maintain maintenance records and repoCanteen
Longview, TX 75602 • (34.6 miles) • Full Time • 11/1/2026
Other Forms of Compensation: Yearly Bonus Opportunity Growth. Opportunity. Excellence. Fresh & Ready Food Group is a member of Canteen. Canteen sets the national standard for excellence in automated retail, and EVERY segment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel our growth . YOU bring enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. TOGETHER we’ll continue transforming the micro-market, dining, coffee, and vending industry. Come grow with us. We are Canteen. Job Summary: The Production Manager (Ready-to-Eat Foods) is responsible for planning, directing, and coordinating daily production operations within a food manufacturing facility. This role ensures the efficientAdams Communication & Engineering Technology, Inc.
Bossier City, LA 71110 • (25.4 miles) • Full Time • 10/31/2026
Company Overview: Adams Communication & Engineering Technology (ACET), Incorporated is a Veteran Owned Small Business (VOSB) system engineering and information technology firm. Incorporated in 1999, we support mission critical Information Technology (IT) business needs for clients within the intelligence community (IC), Department of Defense (DOD), Veteran Administration (VA) and for select commercial clients. ACET, Inc.’s technical, programmatic, and analytical professionals are experts in commercial technology, customized solutions, and proprietary government systems. The Position: ACET is hiring a Wing Scheduler to support the 2d Bomb Wing and 2d Operations Group at Barksdale AFB, Louisiana . The 2d Bomb Wing operates the B-52H. This position supports Wing Scheduling for the 2d OperatioPrysmian Group
Scottsville, TX 75688 • (11 miles) • Full Time • 10/31/2026
Prysmian is the global leader in energy and telecom cable systems. Every year, we manufacture thousands of miles of underground and submarine cables for power transmission and distribution, as well as medium and low voltage cables for construction and infrastructure. We also produce a full range of optical fibers, copper cables, and connectivity solutions for voice, video, and data transmission. With over 30,000 employees across 50+ countries , Prysmian is transforming how the world connects and powers its future. At every level, our people are empowered to make an impact. Join us and Make Your Mark . Lead Transformation at a Global Industry Leader: Prysmian, the world’s largest manufacturer of energy and telecom cables, is seeking a seasoned executive to lead our largest manufacturing facNR Consulting LLC
Shreveport, LA 71108 • (16.3 miles) • Full Time • 10/30/2026
Job Title: Mechanical Technician \nLocation: Shreveport, LA 71108 \nDuration: 12 Months \nPay rate: $24.00/hr to $25.00 /hr on W2 without benefits \nShift: No shift premium; 15-6 rotation day shift 6am till 6pm \n \n The Mechanical Technician is responsible for ensuring on-time delivery of equipment as per operational demands. The Mechanical Technician improves maintenance related nonproductive time ratio of the Product Line's assets within the Maintenance Base (MB), and improves maintenance efficiency and people productivity. * Maintain assigned equipment according to the pertinent maintenance program and compliant with the reliability centered maintenance strategy through adherence to the Computerized Maintenance Management System and standard work. * Adhere to transactional discipline wKatalyst Healthcares & Life Sciences
Shreveport, LA 71101 • (18.6 miles) • Full Time • 10/30/2026
Job Summary: \nThe Senior Supplier Quality Engineer is responsible for managing and improving supplier quality performance across the supply chain. This role works closely with suppliers, Engineering, Manufacturing, Quality, Procurement, and Operations teams to ensure purchased materials, components, and services meet established quality and regulatory requirements. \n Key Responsibilities: \n \n Lead supplier qualification, evaluation, and approval activities. \n Develop and maintain supplier quality requirements, specifications, and quality agreements. \n Conduct and support supplier audits, assessments, and process reviews. \n Lead supplier SCAR/CAPA activities and drive timely corrective and preventive actions. \n Investigate supplier-related nonconformances, defects, and quality issueRainbow Restoration Of Shreveport-Bossier City
Shreveport, LA 71106 • (20.2 miles) • Full Time • 10/30/2026
Est motivado, prospera en un entorno de rpido movimiento y es capaz de administrar el tiempo para cumplir con los plazos de manera efectiva? Tiene excelentes habilidades de comunicacin con supervisores, empleados y clientes y es capaz de manejar de manera efectiva una variedad de situaciones en el da a da? Tiene experiencia en restauracin, reconstruccin o limpieza de viviendas? Si dijo que s a lo anterior, entonces podemos tener una gran oportunidad para usted en Rainbow Restoration como Gerente de Proyecto. En Rainbow Restoration, ayudar a las personas cuando su hogar, propiedad o negocio sufra daos por fuego, agua, humo o moho. Si est listo para comenzar una carrera en la que hace algo diferente todos los das y disfruta sabiendo que est marcando una diferencia en la vida de nuestros clieHoly Angels Residential Facility
Shreveport, LA 71106 • (20.2 miles) • Full Time • $17.00 / hr • 10/30/2026
Full Time, 40 hour per week, hours not dependent on census, one on one therapy sessions. Starting Rate: $17.00 Benefits: Fulltime Eligible Staff · 403b retirement with Match · Health · Dental · Vision · Life · Short Term Disability · Long Term Disability · Accident · Critical Illness · Paid Time Off · Holiday Pay · Employee Referral Bonus · Wellness Center Free Membership Job Summary: Holy Angels Academy is in search of a Registered Behavioral Line Tech. Under the supervision of the BCBA, the main duty of the Line Tech is to provide clinical skills instruction and behavior reduction protocols based upon the principles of Applied Behavior Analysis to children with Autism and related developmental disabilities in the home, community, and school settings. The Line Tech will collect data on prZobility
Shreveport, LA 71115 • (32.8 miles) • Full Time • 10/30/2026
We are seeking an experienced Quality Assurance Manager to lead quality initiatives within a manufacturing environment. This individual will oversee Quality Assurance and Quality Control operations while ensuring products consistently meet customer expectations, regulatory requirements, and internal quality standards. \n\n This is a hands-on leadership role focused on driving continuous improvement, supporting production, and building a strong quality culture. \n\n Responsibilities \n\n \n Lead and develop Quality Assurance and Quality Control teams. \n Manage and maintain the Quality Management System (QMS). \n Develop, implement, and improve quality processes, procedures, and work instructions. \n Monitor production quality and identify opportunities for process improvements. \n AnalyzeWest Fraser, Inc
Henderson, TX 75652 • (42.3 miles) • Full Time • $25.82 / hr • 10/30/2026
Our Millwrights are a key player in a company-wide continuous improvement effort through daily use of troubleshooting, and predictive and preventative maintenance strategies. As a member of this high performing team, you will be responsible for being a team player and working safely with all machinery within the mill. What you will do: Repair and maintain industrial equipment to include conveying systems, major machine centers such as debarkers, canters, gang saws, and edgers Perform preventative maintenance on equipment to ensure "Just in time" maintenance Move machinery and equipment, using hoists, dollies, rollers, and trucks Adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts AlHarvey Autos
Bossier City, LA • (23.4 miles) • Full Time • 10/29/2026
RESPONSIBILITIES: Perform work specified on the repair order efficiently Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, brakes, air conditioning, etc. Execute repairs under warranty to manufacturer specifications Communicate directly with the Service Advisor so that customers are informed if any additional service is needed. Provide an estimate of time needed for additional repairs. \n EXPERIENCE 2+ years of Service Technician experience preferred High school diploma or equivalent Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment Excellent customer service skills andTHE BUTCHER SHOP
Longview, TX • (40.8 miles) • Full Time • $11.00 / hr • 10/29/2026
Join Our Team as a Back Bakery-Production Team Member Are you passionate about baking and looking for an opportunity to be part of a hardworking team? We're hiring for a Back Bakery-Production role, where you'll play a key part in creating high-quality baked goods and ensuring our bakery runs smoothly. If you have at least one year of experience and are eager to contribute to a dynamic environment, we encourage you to apply in person by filling out a paper application. Responsibilities As a Back Bakery-Production team member, you'll be responsible for preparing and producing baked goods to meet our high standards of quality and consistency. This role involves working behind the scenes to ensure our bakery is stocked with fresh products, managing production tasks efficiently, and maintaininWestdale Asset Management
Shreveport, LA 71115 • (32.8 miles) • Full Time • $16.00 to $17.00 / hr • 10/28/2026
Rate: $16.00- $17.00 per hour (Hourly non-exempt position) ***Monthly renewal bonuses are paid in addition to base pay.*** We are seeking a Service Technician I for our 168-unitapartment community in Shreveport, Louisiana! As Service Technician I, you will turn vacant units into beautiful apartments, preparing them for new residents to call home. You will also be responsible for the general upkeep of the property grounds and common areas. If you like a feeling of accomplishment at the end of your workday, then join our team and work for a company that values teamwork and offers opportunities to advance! Apply now! Requirements At least 6 months of previous maintenance experience on an apartment community, commercial building, or single-family residences. Must meet all physical requirementsONEMESA
Longview, TX 75605 • (38.6 miles) • Full Time • 10/28/2026
About the Role: BASS Corrosion Services, Inc., is seeking a full-time Cathodic Protection Engineer (PE) to support and expand our cathodic protection design services. BASS is a full-service contractor specializing in cathodic protection and corrosion control solutions for pipeline, utility, industrial, power generation, and infrastructure clients. In addition to construction and installation services, BASS provides technical support including annual surveys, rectifier inspections, atmospheric corrosion assessments, cathodic protection system evaluations, interference testing, and integrity-related consulting services. BASS routinely provides cathodic protection design services for new pipeline systems, facilities, tanks, and other infrastructure. We are also a trusted partner in developingJeter Therapy Group
Shreveport, LA 71104 • (19.4 miles) • Full Time • $12.00 to $14.00 / hr • 10/27/2026
Registered Line Technician (RLT) – Applied Behavior Analysis (ABA). Position Summary: The Registered Line Technician (RLT) provides direct one-on-one behavioral intervention services to children diagnosed with developmental disabilities, including Autism Spectrum Disorder (ASD). The RLT implements individualized treatment plans developed by a supervising Board Certified Behavior Analyst (BCBA) and collects accurate data to support measurable client progress. Essential Job Responsibilities: Implement individualized ABA treatment programs under the supervision of a BCBA. Provide direct therapy in clinic, home, school, or community settings as assigned. Utilize evidence-based ABA strategies including discrete trial training (DTT), natural environment teaching (NET), task analysis, and behavioStasis Drilling Solutions
Bossier City, LA 71111 • (22.2 miles) • Full Time • 10/25/2026
FUNCTION: Facility FLSA STATUS: Non-Exempt REPORTS TO: Maintenance Manager LOCATION: Bossier City, LA JOB SUMMARY A Shop Technician will provide shop and field location maintenance and troubleshooting support for I&E, MPD, and RCD field operatives. Maintain all MPD and RCD equipment as well as safely and efficiently rigging up and down all equipment. Maintain and keep Stasis and client quality, health, safety and environment systems compliance. PRIMARY RESPONSIBILITIES Primary responsibilities are inclusive, but not limited to the items listed below. • Repair and maintain equipment used in oil and gas production and drilling operations, including pumps, motors, generators, and compressors. • Conduct inspections and tests to identify problems and develop repair plans. • Assemble, and test eIndevco North America Inc
Longview, TX 75604 • (44.6 miles) • Full Time • 10/25/2026
Description: The Quality Manager provides technical and quality leadership across the production process. This role oversees the Quality System, analyzes production and supplier sample data, communicates findings to appropriate personnel, and ensures compliance with applicable requirements. The Quality Manager also participates in daily and monthly quality and safety audits of equipment and personnel. Key Responsibilities Quality Leadership and Operations · Approach all work, decisions, and communication with a focus on improving quality and eliminating waste. · Stop any operation that is not producing products that meet customer expectations or that violates approved quality or safety standards. · Collaborate effectively with other divisions within INDEVCO Group to drive improvements. · CSalute Inc.
Shreveport, LA 71118 • (16.2 miles) • Full Time • $75,000 to $105,000 / yr • 10/24/2026
A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. This role requires significant travel, with expectations of up to 50-75% annually, especially if you are not currently residing near one of our key job site locations such as: South Dallas, TX LubboHOLT CAT
Longview, TX • (40.8 miles) • Full Time • $16.80 to $27.00 / hr • 10/23/2026
Description The Undercarriage Shop Technician 1 , performs basic to moderate diagnosis and repairs on heavy construction equipment undercarriage in a shop environment. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions Personally models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission Statement. Performs basic repairs on equipment undercarriage and undercarriage components. Operates undercarriage build-up and rebuild machines,Pizza Hut - Tall Timbers
Marshall, TX 75670 • (21.8 miles) • Full Time • 10/23/2026
Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut Cook, you can be the smiling face that cooks our food and serves the customers. You will learn how to cook from scratch. Working with us will give you financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime. What are we looking for? The good news is that your training will teach you everything you need to know to succeed in the job. But there are a few skills you should have from the get-go: You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you’re not goinSigma Technologies, Ltd.
Shreveport, LA 71101 • (18.6 miles) • Full Time • 10/22/2026
Description: OSP Field Designer Location: Remote with Regular Fieldwork in Northern Louisiana and Central Arkansas Initial Work Areas: Shreveport, LA and Little Rock, AR areas About the Role Are you an experienced OSP fiber design professional who enjoys both fieldwork and design work? Sigma Technologies is looking for an OSP Field Designer to support telecommunications projects through a combination of field data collection, route verification, drafting, and design. This role will initially support project work in Northern Louisiana and Central Arkansas, including the Shreveport, LA and Little Rock, AR areas. As project needs grow and shift, the assigned work areas may change. Applicants must be willing and able to travel outside of the initial starting areas, including overnight travel wSpartan Flow Control Services LLC
Shreveport, LA 71129 • (10.1 miles) • Full Time • 11/4/2026
Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Primary Responsibilities: Responsible for assigned shop and field mechanical and electrical repair functions to ensure continuous production consistent with established standards Assist Field Supervisors with Rig-ups and equipment trouble shooting Tear down valves, pipe fittings, flanges, bushings, bonnets, Frac stacks, gate manifolds; rebuild valves, plugs, catchers, and sand knockouts; repair, test, grease and paint equipment to prepare for use Load and unload 18-wheeler trucks, flatbed trucks, and hot shot delivery trucks with valves, manifolds, and oilfield machinery Re-paint equipment and use hammer and punch to scribe serial number on tools and equipment for identification purposes. RecoHarvey Subaru
Bossier City, LA • (23.4 miles) • Full Time • 10/27/2026
As a family owned and operated business, earning the trust of our customers, employees and community is what drives us to be better. Our recently renovated state-of-the-art facility gives us the necessary tools to serve our customers and employees at a higher standard. \n WE OFFER: \n \n \n Health & Dental Insurance \n \n 401K \n \n Closed on Sundays \n \n 5 day work week \n \n Free lunch on Saturday \n \n Paid Training \n \n Air Conditioned Shop \n \n RESPONSIBILITIES \n \n \n Test to check whether systems and components are secure and working properly \n \n Drive the vehicle for testing purposes \n \n Oil changes and general maintenance items \n \n Repair or replace worn parts ahead of the vehicle’s breakdown or damage \n \n Use power tools, machine tools, and common hand tools to perforKonecranes
Shreveport, LA • (15.7 miles) • Full Time • 10/29/2026
Company Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive.We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community, and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work . Job Description JOB POSITION: Industrial Technician Are you interested in becoming an experienced Overhead Crane Service Technician? Join Konecranes, one of the world’s largest material handling companies. We're seeking skilled individuals with electrical and mechanical expertise, comfortable working at extreme heights. Our service technicians, the heart of ouDouble L Contractors LLC
Carthage, TX 75633-3332 • (27.5 miles) • Full Time • 10/24/2026
Pump mechanic must be familiar with the following: Gardner Denver SPM Dragging Cartex Triplex pumps Quintuplex pumps Change fluid ends Repair power ends Change out packing on 1 barrel to 7 barrel minute rate pumpsVoigt-Abernathy
Longview, TX 75602 • (34.6 miles) • Full Time • $25.00 / hr • 10/24/2026
Pump Mechanic \n\n Join the Voigt-Abernathy Team \n Voigt-Abernathy is a leading distributor and service provider of industrial rotating and process equipment throughout the Southeast. We specialize in pumps, pumping systems, seals, mixers, filtration, and engineered process solutions for customers across a wide range of industries. \n Our reputation has been built on technical expertise, exceptional customer service, and quality workmanship. We invest in our employees by providing ongoing training, opportunities for advancement, and a safe, team-oriented work environment. \n If you enjoy solving mechanical problems, take pride in quality repairs, and want to build a long-term career with a growing company, we'd like to hear from you. \n\n Position Summary \n Voigt-Abernathy is seeking anSunSource
Bossier City, LA • (23.4 miles) • Full Time • 10/21/2026
\n Master Pumps & Power , a SunSource company, has been an industry leader for over 45 years. As one of the largest pump distributers in North America we stock over 8000 pumps and offer custom design, fabrication and on-site services. We proudly serve customers in Texas, New Mexico, Louisiana, Oklahoma, North Dakota, Colorado, Pennsylvania, Arkansas, W. Virginia, Ohio, Wyoming and Montana. www.masterpumps.com \n \n \n \n \n \n Key Responsibilities \n \n \n - Inspect, diagnose, repair, and rebuild various pumps (centrifugal, gear, diaphragm) and related equipment (motors, compressors, valves).\n \n \n - Perform routine preventative maintenance and troubleshooting.\n \n \n - Assemble and disassemble rotating equipment.\n \n \n - Operate specialized repair and testing equipment.\n \n \n - InsMicroMetl Corporation
Longview, TX 75602 • (34.6 miles) • Full Time • $17.20 / hr • 11/12/2026
MicroMetl Corporation is currently the largest independent manufacturer of accessories for commercial heating and cooling equipment. With over 60 years of industry experience and service, we continue to grow throughout the Midwest and Southwest regions. We offer a competitive benefits package that includes wages, medical/dental/vision coverage eligibility, employer-paid basic life insurance and short- and long-term disability, profit sharing bonus eligibility, a 401(k) with employer match, PTO, and holiday pay. MicroMetl Corporation is dedicated to company values including honesty, integrity, and supporting teamwork and diversity, while maximizing the potential of our greatest asset: Our Employees! We are looking to add a few Machine Operators to our Longview, Texas team. This role operateAmerican Wood Fibers, Inc
Marshall, TX 75672 • (13.4 miles) • Full Time • 11/4/2026
American Wood Fibers (AWF) is a manufacturer of both consumer and industrial products that are sold to multiple manufacturers as well as pet, agricultural, and home-heating markets. AWF is comprised of 400+ employees and holds operations at 11 locations, generating over $100M in annual sales revenue. We are currently seeking a candidate for the 3rd Shift Packaging Machine Operator role in our Marshall, Texas facility. JOB SUMMARY The Packaging Machine Operator is responsible for working in a safe, efficient manner to maximize hands-on production and shipping of wood shavings. ESSENTIAL RESPONSIBILITIES SAFETY Attend monthly safety meetings Wear PPE as required Attend trainings as needed and complete required testing with sufficient results PRODUCTION Operate equipment in a safe and efficieAxis Energy Administration LLC
Longview, TX 75602 • (34.6 miles) • Full Time • 11/3/2026
***This job has preference to qualified local job seekers within 60 miles of Axis Longview, TX facility. The Snubbing Operator safely operates, coordinates, and supports snubbing unit activities at well sites, including rig-up, rig-down, equipment operation, routine inspection, maintenance support, crew mentorship, and preparation of equipment for subsequent jobs. This position supports safe and efficient pressure-control operations, promotes quality service and customer satisfaction, and performs work in outdoor oilfield environments, in all weather conditions, including exposure to temperature extremes and high noise levels. A valid state-issued driver license is required; Class A or B CDL with air brakes endorsement is preferred. The Snubbing Operator must be able to perform the essentiContinental Drilling & Service
Shreveport, LA 71107 • (14.5 miles) • Full Time • 10/21/2026
Synergen believes that connective, turnkey services and collaborative relationships create more innovative solutions and greater project outcomes. We develop, build, and grow services specifically designed to work together to enhance capabilities and amplify results. We’re curious and determined problem-solvers, built on grit and an unwavering determination to get it done. Synergen provides an array of custom support services for the oil & gas industry and beyond, backed by decades of experience and relationship-focused service. Our offerings can carry customer projects from start to finish, while providing the reliability and support they need at every stage in between. We are actively seeking a Compact Tract Loader Operator at Continental Drilling and Service, a Synergen company, locatedLapressco Printing
Shreveport, LA • (15.7 miles) • Full Time • $17.00 / hr • 11/8/2026
We're looking for a full time production employee to help with finishing jobs. This entails: Running a booklet making machine Running an envelope inserter machine Running a folding machine Hole punching Round corners Traying up mailers Etc. Experience is preferred but not required, we can train on all machines.Fulcrum Careers
Shreveport, LA 71129 • (10.1 miles) • Full Time • 11/18/2026
Description: As a Data Center Quality Inspector I, you provide superb quality control services for our clients. The work includes performing essential inspections of electrical equipment and systems, such as switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections and interpret electrical drawings and specifications. You will ensure the equipment and technicians around you comply with company and site safety requirements. You prepare detailed daily reports about your findings, including time tracking and special inspection reports. With diligence, you review, approve, and submit essential documentation, including Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients recPrysmian
Marshall, TX 75670 • (21.8 miles) • Full Time • 11/17/2026
Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian Group - Join Us Team Overview and Job Responsibilities: What You'll Do:Gordon, Inc.
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/16/2026
Benefits: 401(k) Competitive salary Dental insurance Health insurance Paid time off Vision insurance EDUCATION (or) RELEVANT EXPERIENCE: • Certification in Basic Drafting Software with 7+ years of drafting experience; or a Technical Certification in the design discipline with 3+ years of experience. AREAS OF RESPONSIBILITY: Essential Job Functions: Active member of the design team Generate design concepts Generate Submittal and Fabrication Drawings for multiple product types Review/Check quality of design drawings per company standards Organize and participate in design charrettes Answer questions from internal and external customers as required Job Requirements: Need to be familiar with Architectural and Engineering Drawings. Experience with any 3D Modeling Software is required. ExperiencFresh & Ready Foods
Longview, TX 75605 • (38.6 miles) • Full Time • 11/14/2026
Position Title: QUALITY ASSURANCE SPECIALIST Location: Onsite in Longview, TX Salary: $60,000 - $80,000 Other Forms of Compensation: None Growth. Opportunity. Excellence. Fresh & Ready Food Group is a member of Canteen. Canteen sets the national standard for excellence in automated retail, and EVERY segment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel our growth . YOU bring enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. TOGETHER we’ll continue transforming the micro-market, dining, coffee, and vending industry. Come grow with us. We are Canteen. This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘jMcElroy Metal Mill Inc
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/12/2026
About McElroy Metal McElroy Metal is a leading manufacturer of metal roofing, metal siding and sub-structural components with 14 manufacturing facilities, 28 Service Centers and 44 Metal Mart locations across the US. After three generations of family ownership, McElroy transitioned to an employee-owned company (ESOP) in 2022 . Ian McElroy, who continues to serve as the President of McElroy Metal, shared the reason for the change, "The one constant trait during our 60-year history is the influence and support of employees. Throughout the country, McElroy Metal is blessed to have loyal team members, including many that have dedicated decades of service to the company. As a show of appreciation, McElroy Metal team members are now employee owners of McElroy Metal.” Benefits Employee Stock OwneNABRICO Marine Products
Bossier City, LA 71111 • (22.2 miles) • Full Time • 11/12/2026
Join our team as an Industrial Engineer and help shape the future of our manufacturing operations. In this role, you will leverage engineering principles, data analysis, and continuous improvement methodologies to streamline processes, improve production efficiency, and support operational growth. You'll collaborate with production, quality, maintenance, and leadership teams to develop innovative solutions that enhance safety, reduce costs, and maximize equipment and workforce performance. If you thrive in a manufacturing environment and enjoy turning complex challenges into practical results, we'd love to hear from you. ResponsibilitiesQuality Management Build and maintain the plant quality management system, including inspection plans, control plans, work instructions, and document contrExpress Employment Professionals - Shreveport
Bossier City, LA 71111 • (22.2 miles) • Full Time • $20.00 to $30.00 / hr • 11/11/2026
Precision MIG/TIG Fabrication Welder\n Location: Bossier City, LA \n Compensation: $20–30/hour \n Schedule: Monday – Friday, 7:00 AM – 4:00 PM \n Employment Type: Full-Time \n\n A day in the life\n You clock in at 7:00 AM, review the day’s prints, and stage your materials. By mid-morning, your MIG torch is laying down clean, consistent beads on a custom assembly. After lunch, you switch to TIG to finish a precision component, verify tolerances, and polish out any imperfections. Before wrap-up, you organize the bay, service your tools, and coordinate with teammates to keep production on pace for the week. \n\n Core responsibilities\n \n Execute MIG, TIG, and/or stick welds on a range of metal parts and assemblies \n Interpret blueprints, drawings, and technical notes to plan fabrication steNCW
Shreveport, LA • (15.7 miles) • Full Time • 11/7/2026
\n Manufacturing Engineer – Shreveport, LA \n \n \n Pay Rate: $75,000-$105,000 per year, based on experience\n \n \n Schedule: 7:00am-4:00pm\n \n \n Job Type: Direct Hire\n \n \n Application Period: This position will remain open until filled\n \n \n \n \n \n \n \n \n Position Summary: \n \n \n \n \n \n The Manufacturing Engineer supports the transition of products from engineering to production while improving manufacturing processes, workflow, quality, and efficiency. This position provides technical and planning support to operations, develops standardized work procedures, evaluates production methods, andidentifiesopportunities to reduce costs, improve productivity, andmaintainsafe manufacturing practices.\n \n \n \n \n \n Responsibilities: \n \n \n Support product transitions from engModule X Solutions
Shreveport, LA 71106 • (20.2 miles) • Full Time • $75,000 to $85,000 / yr • 11/7/2026
Benefits: 401(k) 401(k) matching Bonus based on performance Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Wellness resources JOB SUMMARY: The Quality Engineer position is responsible for supporting manufacturing process and product quality by adhering to MXS standards and procedures to help ensure compliance to drawings and specifications. This position requires the employee to perform a wide variety of duties including, but not limited to, the following: ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: Takes appropriate actions on nonconforming product and customer complaints. Determine and track departmental goals. Performs or arranges for the performance of internal audits of the quality management systemElevate Human Capital
Shreveport, LA 71107 • (14.5 miles) • Full Time • $75,000 to $105,000 / yr • 11/5/2026
EHC is currently seeking a Manufacturing Engineer for a manufacturing opportunity in Shreveport, Louisiana. \n Overview \n The Manufacturing Engineer supports the transition of products from engineering to production while improving manufacturing processes, workflow, efficiency, quality, and safety. Responsibilities include: \n · Coordinate product transitions from engineering to production and provide technical support to operations. \n · Collaborate with operations and cross-functional teams to identify workflow improvements and resolve manufacturing concerns. \n · Support material planning, kitting, production routings, and bills of materials (BOM). \n · Develop, document, and maintain standard work processes and manufacturing procedures. \n · Evaluate production methods for efficiency,Enpro
Longview, TX • (40.8 miles) • Full Time • 11/4/2026
The Product Technician I – Hubodometers is responsible for supporting day-to-day production operations within the assembly area. This role is a key contributor to a high-performing team and is expected to assemble components, follow standard work, and ensure product quality through accurate inspection and defect detection. This position requires strong attention to detail, the ability to consistently follow standardized processes, and a commitment to safe work practices, quality execution, and continuous improvement. What You’ll Do: Perform manual and/or semi-automated assembly operations in accordance with established standard work and safety procedures Assemble components and sub-assemblies using tools, fixtures, and work instructions to meet product specifications Inspect finished and iWest Fraser, Inc
Henderson, TX 75652 • (42.3 miles) • Full Time • $25.82 / hr • 10/30/2026
This position is located at the West Fraser Lumber Mill located in Henderson, Texas. The Industrial Manufacturing Electrician will be responsible for troubleshooting, correcting, and maintaining all electrical equipment within the manufacturing facility. Responsibilities include but not limited to: Test electrical systems and circuits in electrical wiring, equipment, or fixtures Inspect electrical systems, equipment, or components to identify hazards, defects, or repair Troubleshoot, program, and upgrade Programmable Logic Controllers (PLC) Work with vendors to identify needed parts and recommend to Supervisor Understand and update instrumentation loop diagrams, E & I drawings, blueprints, and schematics Program AC & DC variable speed drivers Update power distribution system, MCC, and switEpic Canning And Bottling Inc
Shreveport, LA 71108 • (16.3 miles) • Full Time • $18.00 to $25.00 / hr • 10/26/2026
Description: Position Summary In accordance with the established mission, policies, and procedures of the Company, the Quality Control Technician I ensures that the plant remains compliant with all applicable food safety and regulatory requirements. This role identifies and reports any deficiencies or practices that could compromise food safety, product quality, or food defense. A significant portion of time will be spent in a production environment working alongside production personnel and around various types of manufacturing equipment, requiring extended periods of standing. The remaining time must be used efficiently to organize, maintain, and support a documentation-based quality program. Requirements: Duties and Responsibilities (Include, but are not limited to:) Report any food safGenerator Supercenter Of Shreveport
Shreveport, LA 71105 • (20.7 miles) • Full Time • $16.00 to $20.00 / hr • 10/26/2026
Benefits: Free Friday Breakfasts A positive and collaborative work environment Voluntary Life Insurance Short and Long Term Disability Medical, Dental and Vision 401K Matching (after 6 months of employment) Company work truck is provided * offered after 60 days of employment Company Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you wilHalliburton
Bossier City, LA 71111 • (22.2 miles) • Full Time • 10/20/2026
We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry. Job Duties Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total waterPlain Dealing Lumber, LLC
Shreveport, LA 71101 • (18.6 miles) • Full Time • 11/14/2026
e Sawfiler is responsible for inspecting, sharpening, repairing, tensioning, and maintaining saw blades and related cutting tools used throughout Plain Dealing Lumber's sawmill operations. This position ensures all saws are maintained to the highest standards of quality and precision to maximize lumber recovery, improve product quality, minimize downtime, and extend tool life. The Sawfiler works closely with Maintenance and Operations to monitor saw performance, troubleshoot cutting issues, and support continuous improvement initiatives while adhering to all safety policies and procedures. \n \n ESSENTIAL DUTIES & RESPONSIBILITIES \n \n • Sharpen, tension, level, and balance circular saws, band saws, gang saws, and edger saws using precision filing, grinding, and tensioning equipment in thHOLT CAT
Longview, TX 75602 • (34.6 miles) • Full Time • $18.11 to $30.07 / hr • 11/3/2026
Description This Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs of diesel-powered or natural gas industrial engines or related components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Our address is 2210 Legacy Parkway, Longview, TX 75602. Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and s