Please Accept our Privacy Policy
Palmer Hamilton
Elkhorn, WI 53121 • (2.7 miles) • Full Time • $18.00 / hr • 8/19/2026
The Assembler works in Palmer Hamilton’s Trim Department assembling tables and furniture components according to production specifications and quality standards. This hands-on role requires attention to detail, efficiency and safe use of power hand tools. Job Duties Include: Assemble furniture and table components using rivet guns, screw guns, drills, and impact drivers. Follow blueprints, work orders, and assembly instructions. Meet production goals while maintaining quality standards. Inspect finished products and perform rework as needed. Handle and move materials and finished products throughout the department. Assist with packaging and labeling for shipment. Perform basic tool maintenance and follow all safety and PPE requirements. Maintain a clean, organized, and safe work a
Palmer Hamilton
Elkhorn, WI 53121 • (2.7 miles) • Full Time • $18.00 / hr • 8/19/2026
The Machine Operator - Tube Laser sets up and operates TRUMPF tube laser equipment to cut and process tube and structural profiles according to production specifications. This position involves loading materials, monitoring machine operation, performing quality inspections, making routine adjustments and ensuring parts are produced safely, accuratel and efficiently. Job Duties Include: Set up and operate TRUMPF tube laser equipment according to job specifications and work instructions. Load, unload, identify, and organize tube and structural profile materials and finished parts. Read and interpret blueprints, cut lists, job routers, and production documentation. Verify machine programs, material types, dimensions, and job parameters before production. Monitor machine operation and
Palmer Hamilton
Elkhorn, WI • (2.7 miles) • Full Time • $18.00 / hr • 8/19/2026
The Machine Operator - Tube Laser sets up and operates TRUMPF tube laser equipment to cut and process tube and structural profiles according to production specifications. This position involves loading materials, monitoring machine operation, performing quality inspections, making routine adjustments and ensuring parts are produced safely, accuratel and efficiently. Job Duties Include: Set up and operate TRUMPF tube laser equipment according to job specifications and work instructions. Load, unload, identify, and organize tube and structural profile materials and finished parts. Read and interpret blueprints, cut lists, job routers, and production documentation. Verify machine programs, material types, dimensions, and job parameters before production. Monitor machine operation and
Palmer Hamilton
Elkhorn, WI 53121 • (2.7 miles) • Full Time • $26.00 to $31.00 / hr • 8/19/2026
Palmer Hamilton, LLC is seeking a dependable and mechanically inclined Maintenance Assistant to support our manufacturing operations in Elkhorn, Wisconsin. This entry-level, hands-on position assists with preventative maintenance, basic equipment and facility repairs, and general maintenance activities while working alongside experienced Maintenance Technicians. The ideal candidate has mechanical aptitude, a willingness to learn, and a strong commitment to safety. This position provides hands-on training and an opportunity to develop industrial maintenance skills, with potential to advance into a Maintenance Technician role as skills and experience grow. Job Duties Include: Assist with preventative, routine, and corrective maintenance on manufacturing equipment and facility systems. P
Palmer Hamilton
Elkhorn, WI • (2.7 miles) • Full Time • 8/19/2026
The Production Supervisor - Weld & Fabrication leads daily welding and fabrication operations to ensure production, quality, safety, and efficiency goals are met. This role supervises production employees, manages scheduling and resources, monitors performance, and drives continuous improvement. The ideal candidate needs strong welding and fabrication experience, proven leadership skills and a solid understanding of lean manufacturing. Job Duties Include: Lead daily Weld and Fabrication operations to meet production, quality, and safety goals. Supervise, coach, and develop production employees while promoting accountability and teamwork. Manage staffing, scheduling, workflow, and resource utilization. Monitor production metrics, labor, quality, and departmental performance. Ide
Palmer Hamilton
Elkhorn, WI 53121 • (2.7 miles) • Full Time • 8/19/2026
The Production Supervisor - Weld & Fabrication leads daily welding and fabrication operations to ensure production, quality, safety, and efficiency goals are met. This role supervises production employees, manages scheduling and resources, monitors performance, and drives continuous improvement. The ideal candidate needs strong welding and fabrication experience, proven leadership skills and a solid understanding of lean manufacturing. Job Duties Include: Lead daily Weld and Fabrication operations to meet production, quality, and safety goals. Supervise, coach, and develop production employees while promoting accountability and teamwork. Manage staffing, scheduling, workflow, and resource utilization. Monitor production metrics, labor, quality, and departmental performance. Ide
Palmer Hamilton
Elkhorn, WI 53121 • (2.7 miles) • Full Time • 8/19/2026
We are seeking a talented and experienced Mid-Level Interior Designer with 2–5 years of related experience to join our team. This role is responsible for developing commercial interior design projects from concept through documentation, managing multiple projects with minimal supervision, coordinating with internal and external resources, and supporting junior designers. The ideal candidate is a confident designer with strong technical, visualization, communication, and project management skills who is interested in continued professional growth and contributing to business development and marketing efforts. Job Duties Include: Develop B&W layouts, Mini Designs, and preliminary CAD/Revit build-ups accurately and efficiently. Manage multiple projects with minimal guidance and
Zobility
Sussex, WI 53089 • (33.6 miles) • Full Time • 9/13/2026
Job Title: Tool & Die makerLocation: Sussex, WI 53089Duration: Direct-Hire/ Full-TimeJOB DESCRIPTION:Duties:· The Tool & Die Maker will be responsible for building, repairing, and maintaining stamping dies and tooling.· Key daily tasks include reading and interpreting blueprints, setting up and operating machinery, troubleshooting issues, and ensuring equipment performs at optimal levels.· Additionally, the Tool & Die Maker will work closely with production teams to support manufacturing activities, maintain tool quality, and implement improvements for operational efficiency.Qualifications· Proficiency in toolmaking, die maintenance, and experience working with stamping dies· Ability to read and interpret technical blueprints, schematics, and CAD drawings· Experience with operating machiniAerotek
Delafield, WI 53018 • (24.4 miles) • Full Time • 9/12/2026
Assembler - 1st ShiftStarting Pay: $20.00-22.00/HourWe are seeking dependable Assemblers who take pride in craftsmanship, attention to detail, and working in a team-oriented manufacturing environment.What You'll Do As an Assembler, you will be responsible for building wheelchair ramps, stair lifts, and 8-foot rail sections using blueprints, schematics, and assembly instructions. You'll utilize both hand and power tools to produce safe, reliable products that make a difference in people's lives.Key Responsibilities Assemble wheelchair ramps and stair lifts according to blueprints and work instructions.Build and assemble 8-foot rail sections with precision and consistency.Safely operate hand tools, power tools, and measuring equipment.Read and interpret blueprints, schematics, and productionAA2IT
Sturtevant, WI 53177 • (30.2 miles) • Full Time • 9/12/2026
Title:Quality InspectorShift - M-F 7 am to 4 pm ONSITEPay rate: $25-26/HR on W2Maternity leave backfill for 6 monthsDocumentation ReviewEnsure timely QA review of documentation to verify compliance to SOP’s and regulatory requirements. Final ReleasePerform final review and release of finished Medical Device History Records. Identifying NonconformanceIdentify and initiate NCA for nonconformance found during the final review of DHR’s. Change ControlMaintain expertise in quality systems (e.g. assist and review SOP’s, initiate change control) TrainingEnsure training requirements are met and records are up to date.ReportingMaintain and update departmental metrics and required reports. AssistAssist with continuous improvement initiatives / projects within the Manufacturing and Quality departmentRusco Manufacturing
Machesney Park, IL • (34.7 miles) • Full Time • 9/12/2026
Swiss CNC Operator About the Position Rusco Manufacturingis seeking an experienced Swiss CNC Operator to join our manufacturing team. The ideal candidate will have experience operating Swiss-style CNC lathes and producing high-precision components in a fast-paced manufacturing environment.This position is responsible for safely and efficiently operating CNC Swiss machines, inspecting finished parts, making basic machine adjustments, and maintaining quality standards.Key Responsibilities Operate CNC Swiss-type lathes to produce precision components.Load raw material and unload completed parts.Monitor machine operation and production cycles.Perform in-process and final inspections using calipers, micrometers, gauges, and other precision measuring equipment.Make basic offsets and machine adjuGreif
Milwaukee, WI • (37.6 miles) • Full Time • 9/12/2026
Greif is a global leader in performance packaging located in 40 countries. The company delivers trusted, innovative, and tailored solutions that support some of the world's most in demand and fastest-growing industries.With a commitment to legendary customer service, operational excellence, and global sustainability, Greif packages life's essentials - and creates lasting value for its colleagues, customers, and other stakeholders.Learn more about the company's Customized Polymer, Sustainable Fiber, Durable Metal, and Integrated Solutions at www.greif.com and follow Greif on Instagram and LinkedIn.OUR VISION:Being the best customer service company in the world.OUR PURPOSE:Creating packaging solutions for life’s essentials.ROLE OVERVIEW:Experienced colleague who assists with troubleshooting,Wrought Washer
Milwaukee, WI 53207 • (36.6 miles) • Full Time • 9/12/2026
Position SummaryThe Quality Engineer supports all Quality Assurance initiatives. This role drives continuous improvement by applying quality planning, root-cause analysis, statistical methods, and corrective and preventative actions. The Quality Engineer ensures robust compliance to the Quality Management System (ISO 9001), supports manufacturing operations by ensuring quality is built into processes, and provides timely responses to customer concerns, internal issues, and supplier-related quality challenges.Key ResponsibilitiesQuality Systems & Compliance- Support and maintain the Quality Management System (ISO 9001).- Create, revise, and control quality documents, procedures, and work instructions.- Perform internal audits, inprocess audits, and support ISO audits.- Complete and manage rJellTech Consulting
Menomonee Falls, WI • (36.7 miles) • Full Time • 9/12/2026
We are seeking a Lead Quality Inspector - CMM Programmer to join a local manufacturer in Milwaukee for a direct hire.Pay: $30-35/HRDescriptionWe are looking for a experienced candidate with skills in finished/in-process part inspection and Coordinate Measuring Machine (CMM) programming and operating. The qualified candidate would report directly the the Quality Manager and be responsible for the supervision and training of Quality Technicians, Metrology Apprentices, and Quality Inspectors.This is a first shift position with in office hours from Monday - Friday with possible overtime based on Company needs.Responsibilities include, but are not limited to:Aid in development of quality and inspection plans from design drawings, meeting Company requirements for ISO 9001-2008, ISO 13485.SuperviTalgo
Milwaukee, WI • (37.6 miles) • Full Time • 9/12/2026
Milwaukee, WI | Full-Time | Railway Industry | $1,000 Hiring Bonus | Great Benefits!Join Us at TalgoTalgo Inc. refurbishes passenger railcars for LA MetroLink at our Milwaukee facility, focusing on high quality mechanical and structural work to extend the service life of the railcars for another 30 years.We are looking for individuals with electrical assembly experience, a strong attention to detail, and a passion for working with trains. If you're ready to grow your skills and make a real impact, we want to hear from you.What We Offer:$1,000 Hiring Bonus100% Employee Insurance Coverage (Medical, Dental, Vision)50% Dependent Health Benefits401(k) with Company MatchPaid Holidays, and a Generous PTO PolicyOpportunities for Career GrowthWhat You'll Do:Support electrical work orders on railcarTanisha Systems
Eagle, WI 53119 • (12.2 miles) • Full Time • 9/11/2026
CNC ProgrammerEagle, WIThe Programmer is responsible for the creation and maintenance of programs for turret punch, laser cutting machines, and dimension flats.Responsibilities:Create and maintain programs for press brakes, panel benders, and robotic brakes.Maintains and/or changes the floor routings and BOMs required for processing the parts through the sheet metal department. Resolve programming issues. Minimum Qualifications:High school Diploma Must be at least 18 years old to work in a manufacturing environment Required Qualifications:Key point: Focus on candidates with experience in sheet metal blanking and bending, not lathe, mill, or general machining programming backgrounds.Priority skills (in order):Amada robot programming for press brakesAmada turret blanking software (VPSS 4i)SAIntellyk Inc
Waukesha, WI 53186 • (27.3 miles) • Full Time • 9/11/2026
In this role you will be responsible for responding to work orders, troubleshooting, and providing preventive and corrective maintenance in an industrial manufacturing environment on all production related industrial systems including, but not limited to pumps, motors, PLC and CNC machinery, robotics, pneumatics, hydraulics, conveyors, and coolant systems. Effective communication with your team and the customer is critical to understand and solve complex electrical and mechanical problems. The Production Maintenance Mechanic identifies and corrects any safety-related issues and performs independent equipment evaluations to identify potential equipment failures.Responsibilities:Follows safety protocols and maintains a safe work environment.Maintains and troubleshoots production equipment.PeColumbus McKinnon Corp.
Hartland, WI • (28.8 miles) • Full Time • 9/11/2026
Job Summary/OverviewThis Positionsets up andoperatesa vertical millto create customized parts within tolerance of prints.Essential Duties and ResponsibilitiesReviews and organizes work orders and pulls set up instructions and blueprints from Epicor if applicable.Sets up appropriate programs to run the Vertical Mill based on work orders and blueprints.May edit the programs and set up instructions.Proficient at setting up and running at least 2 of the Vertical Mills in the department.Performs changeovers as needed, which often has manual aspects and requires attention to detail.Deburr finished parts using deburring wheel or other hand tools if necessary.Performs quality checks and measures finished parts using hand measurement tools to determine if they are within tolerance.Makes appropriateLauber Business Partners
Pewaukee, WI 53072 • (28.8 miles) • Full Time • 9/11/2026
Shift/Hours:1st ShiftLocation:Pewaukee, WIDate Updated:06/16/2026Dynex/Rivett Inc. is a global leading manufacturer of high-pressure hydraulic equipment used on mobile and industrial machinery. Our pumps, valves, motors, and power units are sold worldwide through offices in Pewaukee, WI, Ashland, MA, Eaton Socon, UK, and Dubai, UAE.We offer a small-company environment that fosters teamwork and innovation. We use advanced manufacturing processes with the latest and most sophisticated CNC machines in a clean, well-lit working environment. Our people, work environment and location allow us to attract the best people to achieve our success. We welcome you to join us!ESSENTIAL FUNCTIONS:An individual in this position must be able to successfully perform the essential duties and responsibilitiesSterling Engineering
Franklin, WI • (29 miles) • Full Time • 9/11/2026
Job Title: Electrical Test TechnicianLocation: Franklin, WIShift: First Shift, Monday to Thursday, 5:00 AM to 3:30 PM.Hire Type: Contract to Hire with full benefits!Benefits: Health, Dental, Vision, 401k, room for growth & advancement, and more!Sterling Engineering is partnering with a well-established manufacturer to hire an Electrical Test Technician to support the assembly and testing of electrical power distribution and power quality equipment. This role will perform electrical and mechanical assembly, high-voltage testing, troubleshooting, and final inspections while following strict safety and quality standards.Job Duties:Conduct high-voltage electrical testing, including partial discharge, dielectric, calibration, timing, and low-voltage testing.Assemble electrical power distributioSky Systems, Inc.
Milwaukee, WI • (37.6 miles) • Full Time • 9/11/2026
Automotive Supply Quality Engineer (SQE) Location: Milwaukee, WISalary: $75,000 – $85,000 per yearStart Date: ASAPRole SummaryThe SQE plays a key role in supporting the end-to-end supplier quality process for motorcycle components, from new product introduction (NPI) through sustaining production and warranty follow-through.This role provides hands-on support with supplier quality systems, PPAP validation, and addressing early quality issues during launch and production. The SQE will work closely with senior engineers, plant teams, and supplier contacts to ensure incoming parts meet quality and safety standards throughout the product lifecycle.Key ResponsibilitiesNPI / Launch PhaseAssist in supplier PPAP preparation and submission trackingSupport initial capability studies and dimensionalControlled Surface Finishing Inc.
Stoughton, WI 53589 • (37.7 miles) • Full Time • 9/11/2026
Now HiringPart-Time Shop AideProduction SupportSchedule: Part-time, 24–30 hours/week · Monday–Thursday (Friday optional) · 9:00 AM–3:00 PMPay: $15–$20/hourReports to: Production & Shipping ManagerAbout the RoleWe’re looking for a dependable, hands-on Shop Aide to keep our production floor running smoothly. This is a support role that keeps our machine operators focused on their machines you’ll make sure materials are staged, coolant is topped off, and the shop stays organized and on schedule. It’s a great fit for someone who takes pride in staying a step ahead, enjoys steady physical work, and wants to grow into more skilled responsibilities over time.What You’ll Do• Keep machines supplied throughout the day stage crates of blank material at each station and top off coolant on its regularRemX
Germantown, WI 53022 • (41.7 miles) • Full Time • 9/11/2026
Maintenance TechnicianDirect Hire | Permanent PositionGermantown, WI$30.00 - $40.00+/hour (Based on Experience)Higher rates available for candidates with advanced automation/controls skills10% Shift Differential for NightsLooking for a hands-on maintenance career with excellent pay, overtime opportunities, and outstanding benefits? Join a growing manufacturing team where your mechanical and electrical troubleshooting skills will make a direct impact on production operations.Schedule12-Hour Rotating 2-2-3 ScheduleDay Shift: 7:00 AM - 7:00 PMNight Shift: 7:00 PM - 7:00 AMWork only 15 days per month on averageEvery other weekend is a 3-day weekendOvertime opportunities are readily availableAbility to pick up additional shifts on the opposite crewBenefitsMedical, Dental, and Vision Insurance40Cifa North America, Inc.
Burlington, WI 53105 • (13.1 miles) • Full Time • 9/10/2026
Industrial ElectricianLocation:Union Grove, WIPay:$29.00–$36.00 per hourJob Type:Full-TimeCIFA North America is seeking an experiencedIndustrial Electricianto join our manufacturing team in Union Grove, WI.This position focuses on theelectrical installation, wiring, assembly, testing, troubleshooting, and integration of pump and chassis systemsused in a manufacturing environment.The ideal candidate has hands-on industrial electrical experience and is comfortable installing and routing wiring, terminating electrical connections, installing sensors and switches, troubleshooting electrical systems, reading schematics, and working closely with engineering and manufacturing teams.Responsibilities• Install, route, terminate, and troubleshoot electrical wiring for pump and chassis integration• InAXIS Automation
Hartland, WI 53029 • (31.4 miles) • Full Time • 9/10/2026
JOB SUMMARY:AXIS Automation is looking for a Project Manager with a solid background in project management with an emphasis in capital equipment and mechanical systems. The Project Manager typically oversees projects ranging from $500K to $3M from receipt of order through customer site acceptance. This role requires coordinating, tracking, and reporting of all project related activities and resources to upper management. Communicating with sales, engineering, operations and finance throughout the course of the project is crucial. In addition to planning project execution, you will also play an integral part in defining the scope and deliverables for each project to all stakeholders.The project manager will also be responsible for providing and keeping track of schedules, budgets, and changSolutions HCU
Mount Pleasant, WI • (32.6 miles) • Full Time • 9/10/2026
Position SummaryThe Mechatronics Engineer supports the design, integration, commissioning, and ongoing reliability of automated manufacturing equipment for a new manufacturing facility. This role bridges mechanical, electrical, and software/controls disciplines to ensure that automated production lines – including over-pouching machines, conveyor and material-handling systems, and automated visual inspection equipment – operate safely, reliably, and in compliance with cGMP requirements. The Mechatronic Engineer works cross-functionally with process, facilities, quality, and operations teams throughout equipment design, qualification, and startup.Key Responsibilities Support the design, specification, and integration of mechatronic systems – mechanical, electrical, pneumatic, and controls –Andis Company
Sturtevant, WI 53177 • (30.2 miles) • Full Time • 9/10/2026
We are looking for 1 Intern/Co-op for the Spring 2027 semester who can work full time, onsite, with employment starting in January. The Industrial Design Intern/Co-op will assist the Product Design team with new product activities, market research, and field testing. This is a high-energy position and is involved in various aspects of early product design concepts and supports projects throughout various stages of product development. Candidates should be ready to demonstrate an imaginative mindset seeking to solve real-world problems within a certain market, a willingness to understand the customer, and a strong desire to learn and engage in a clear and respectful mannerESSENTIAL DUTIES & RESPONSIBILITIES: other duties as assigned.Upholds Andis Core Values in all work-related activities.TSapphire Tech Services
Eagle, WI • (12.1 miles) • Full Time • 9/9/2026
The Programmer is responsible for the creation andmaintenance of programs for turret punch, laser cutting machines, and dimension flats.Maxonic
Franksville, WI 53126 • (27.6 miles) • Full Time • 9/9/2026
Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for a Quality Associate I.Job Description: Job Title: Quality Associate I Job Type: Contract Job Location: Franksville, WIWork Schedule: OnsitePay Rate: $24, Based on experienceDescription:Execute Investigations, Root Cause Analysis, Correction, Corrective and Preventive Action activities in accordance with the Company Quality System.Three Point Solutions
Milwaukee, WI • (37.6 miles) • Full Time • 9/9/2026
Job Title: Packaging Assembler IClient: Medical Device Manufacturing CompanyLocation: Milwaukee, WI, 53223Duration: 12 MonthsShift: 1st ShiftDescription:Job OverviewEntry-level Packaging Assembler I position supporting medical device manufacturing and packaging operations. The role involves operating packaging equipment, completing production documentation, following established procedures, and maintaining quality and regulatory standards.Key ResponsibilitiesSet up, operate, maintain, and troubleshoot packaging equipment.Monitor and adjust packaging processes to maintain quality and efficiency.Operate equipment used to package materials and products.Complete batch records and production documentation accurately.Work in a computerized manufacturing environment.Follow established safety, quaThree Point Solutions, Inc.
Milwaukee, WI 53223 • (41.6 miles) • Full Time • 9/9/2026
Job Title: Packaging Assembler IClient: Medical Device Manufacturing CompanyLocation: Milwaukee, WI 53223Duration: 12 MonthsShift: 1st ShiftDescription:Job OverviewEntry-level Packaging Assembler I position supporting medical device manufacturing and packaging operations. The role involves operating packaging equipment, completing production documentation, following established procedures, and maintaining quality and regulatory standards.Extension Inc
Richfield, WI 53076 • (41.9 miles) • Full Time • 9/9/2026
The Quality Technician provides proactive support to internal customers in the areas of product quality and safety. The Technician will use quality planning and control methods and tools to support product and process improvement in the manufacturing and engineering functions. These include methods and tools such as standard work documentation, quality SOPs, gauge control and gauge studies, process capability studies, structured problem solving, prevention-based product planning, and process-based auditing. This position will work with all levels of the organization, sometimes as part of a team or on individual assignments.Sterling Engineering, Inc.
Belvidere, IL 61008 • (35.7 miles) • Full Time • 9/8/2026
Electrical Panel BuilderFull-Time | Manufacturing & AutomationShift:1st Shift – Contract to HirePay:$33.00–$38.00/hour (based on experience)Are you an experienced Electrical Control Panel Builder who enjoys building and troubleshooting advanced automation equipment? Join a growing team that designs and builds custom automated machinery for a variety of manufacturing applications.This is an excellent opportunity to work on unique, custom-built equipment alongside talented engineers and machine builders. If you're looking for a hands-on role where every project is different and there are opportunities to grow your skills and advance your career, we'd love to hear from you.What You'll DoAssemble and wire electrical control panels using electrical schematics and engineering drawings.Install wiBlachford
Menomonee Falls, WI • (36.7 miles) • Full Time • 9/8/2026
Job Summary:The Quality Engineer is responsible for supporting the various functions for Quality Assurance and supervising quality assurance personnel. This position is responsible for facilitating/recommending /implementing corrective actions while working with customers, internal personnel and suppliers. Some expectations in this role is participating in Six-Sigma projects where applicable along with participating in the Plant Quality Board and other engineering/production taskforces as needed. Also includes internal quality system auditing to IATF16949/ISO9001/ISO14001, completing requested PPAPs for the customer(s), performing GR&R, maintaining plant calibration system and measurement system analysis (MSA).Essential Duties and Responsibilities:Customer quality liaison for any and all qSystems Engineering & Automation Corp
New Berlin, WI • (27.3 miles) • Full Time • 9/8/2026
Job Description: CNC Machinist Aerospace TurningSystems Engineering & Automation Corporation15601 West Lincoln AvenueNew Berlin, WI 53151Department:Manufacturing & Machining OperationsReports To:CNC Shift Lead / SupervisorCitizenship Status:U.S. Citizenship required or U.S. Work AuthorizationExperience Level:Senior / Journeyman (8–15 Years)Total Positions Available:8 (2 Group 1 Day, 2 Group 1 Night, 2 Group 2 Day, 2 Group 2 Night)Shift ScheduleGroup 1, Day: Mon–Wed + Thu (half day) 6:00 AM – 6:00 PMGroup 1, Night: Mon–Wed + Thu (half day) 6:00 PM – 6:00 AMGroup 2, Day: Thu (half day) + Fri–Sun 6:00 AM – 6:00 PMGroup 2, Night: Thu (half day) + Fri–Sun 6:00 PM – 6:00 AMAll shifts follow a 3.5 days on / 3.5 days off rotating schedule averaging approximately 42 hours per week. Shift differentiGlobal Power Components
Milwaukee, WI 53219 • (33.7 miles) • Full Time • 9/6/2026
Title: Electrical Engineering Technician Company: Global Power Components – www.globalpowercomponents.comLocation: Milwaukee, WI (onsite 5-days/week) Hire Type: Direct Hire Manager Notes: EE Team – team is responsible for electrical design, quoting, and drawings of all projects. Team supports production during assembly to answer questions on design/installation. Responsible for testing completed projects and communicating with production/quality control on future improvements. Will initially focus on testing and supporting production to ensure correct installations. Will also support EE team with day-to-day tasks. Role will be 70% production and 30% office based – production will be at our new Burnham location (4101 W Burnham). We will provide ample training/support to this individual andSANDRAY PRECISION GRINDING INC
Rockford, IL 61109 • (44.6 miles) • Full Time • 9/6/2026
Looking for a grinder operator experience preferred but willing to train48 hours a weeksetting up and running various types of grinding machinesActalent
Elkhorn, WI 53121 • (0 miles) • Full Time • 9/5/2026
Job Title: Production TechnicianResponsibilitiesExecute aseptic operations including sterile compounding, filling, and capping procedures inside ISO Class 5 cleanrooms.Follow current Good Manufacturing Practices (cGMP) and adhere to FDA guidelines and USP standards in all production activities.Complete batch production records, logbooks, and yield calculations accurately to maintain full traceability and data integrity.Perform strict aseptic gowning procedures and sanitize tools, materials, and equipment entering the sterile core.Operate specialized manufacturing equipment such as autoclaves, formulation vessels, and single-use filling lines.Monitor and troubleshoot production equipment to ensure consistent performance and minimize downtime.Support environmental monitoring protocols by traMastermold LLC
Johnson Creek, WI 53038 • (29.1 miles) • Full Time • 9/5/2026
We’re looking for Paint Process Engineers to own, stabilize, and improve our paint and coating processes. This role is less about “babysitting the line” and more about building robust processes that run right the first time, every time.You’ll define standards, dial in parameters, reduce defects, and lead continuous improvement so production, quality, and maintenance have a repeatable, capable process to work with.What You’ll Do Process Engineering & StandardizationDevelop, document, and maintain paint process standards (parameters, recipes, and work instructions) for existing and new products.Define and optimize: gun settings, atomizing air, film build targets, flash/bake times, oven profiles, line speeds, and booth balance.Build and maintain control plans, standardized work, and process cAston Carter
Sussex, WI 53089 • (33.6 miles) • Full Time • 9/5/2026
Job Title: Production PlannerJob DescriptionThe Production Planner plays a key role in developing and maintaining master production schedules that align with customer demand, capacity, and inventory targets. This position translates sales orders and forecasts into detailed work orders, coordinates closely with procurement and cross-functional teams, and adjusts schedules in real time to ensure on-time delivery and efficient production. The role is ideal for someone who enjoys analytical work, thrives in a fast-paced manufacturing environment, and is eager to contribute ideas and drive process improvements.ResponsibilitiesDevelop, maintain, and publish master production schedules (MPS) that align with customer orders, demand forecasts, and production capacity.Translate sales orders and demaBourn & Koch LLC
Rockford, IL • (41.3 miles) • Full Time • 9/5/2026
Mechanical AssemblerClassification: Non-exempt (Hourly)Standard hours: Monday – Friday, 6:00 a.m. to 2:30 p.m.Reports to: ForemanDate: August 5, 2026Pay range: $23.00 - $34.00/hourlyPosition Summary: Bourn & Koch is a leading manufacturer and remanufacturer of precision CNC machine tools serving customers across North America. We are seeking a skilled Mechanical Assembler who takes pride in building high-quality, precision equipment.In this role, you will assemble, align, inspect, and test mechanical components and machine systems using engineering drawings, assembly documentation, and quality standards. The ideal candidate has strong mechanical aptitude, enjoys hands-on work, and is committed to producing reliable, high-quality products in a collaborative manufacturing environment. This i