PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Description The Defense Systems Sector at Leidos, is seeking a talented Embedded Firmware Engineer to join a diverse team in Huntsville, AL, to create unique solutions for complex problems.Primary ResponsibilitiesThe applicant must have experience writing embedded software in the C or C++ languages for embedded systems. They should have a solid understanding of and experience with real-time software principles such as RTOS task scheduling and prioritization, inter-process communication with semaphores and mutexes, memory management involving both the stack and heap, and boot processes. Must have experience interacting with real hardware from a software environment and have experience writing low-level device drivers in both bare-metal and operating system environments, interacting with device registers and chip-to-chip hardware interfaces. Must have experience with boot processes and bootloaders and customizing bootloaders, such as U-Boot to support specific hardware configurations. Experience with low-level communication protocols such as SPI, I2C, and UART are a must. Experience with high-speed data transfer using protocols like PCIe and Aurora are desired.Basic QualificationsBachelor's degree in Electrical or Computer Engineering or a related discipline from an ABET-accredited institution with 12+ years of relevant experience or 10+ years with MS degree.Experience with embedded Software/Firmware design.Experience working with embedded operating systemsHigh proficiency with C/C++, and TCL.Experience in FPGA system design and test from architecture through implementation.Familiarity with modern Xilinx FPGA families and design tools (7-series FPGAs, Ultrascale+, Vivado, Xilinx IP cores)Experience with multiple high-speed serial communication standards and interfaces (e.g. Aurora, 10Ge, PCIe, DDR4/3/2/1, JESD204B)Experience with standard internal interfaces such as AXI4, AXI4-Stream, AXI4-LiteMotivated self-starter and problem solver with experience executing in multi-disciplinary teams.Hands-on laboratory experience with instrumentation, test equipment, and debug/test methods.Candidate must be a US Citizen and possess (and be able to maintain) a Final Secret Clearance or meet the eligibility to obtain (and maintain) a Secret Clearance.Preferred QualificationsExperience working with SoC designs such as Zynq and Zynq Ultrascale+ including architecting and interfacing with peripherals, interrupts, and related bus architecturesWorking knowledge of digital/analog/mixed signal electronics, components, and interface/communication standardsExperience with FPGA PCBA hardware designOriginal Posting Date:2024-09-13While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree in a technical field (engineering, construction management, IT etc.) and graduating in December 2024 and May/June 2025. Program starts January 6, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Description The Aerospace Systems Group at Leidos currently has an opening for a talented Senior DSP Firmware Engineer supporting the Integrated RF Systems Branch in Huntsville, AL. This is an exciting opportunity to use your experience in firmware design for ground-breaking advanced RF systems that provide critical information to a wide range of customers. Our team is passionate about our systems and products, and we get to see how our work makes a difference daily for our nation's warfighters. Come join our technically diverse team and put your knowledge, skills, and talent to great use!The Integrated RF Systems Branch primary mission is to analyze, understand, exploit, and defend against foreign threats. The ideal candidate for this position will lead and support DSP firmware development efforts across multiple projects and specialized RF platforms. The selected candidate will investigate advanced digital signal processing (DSP) techniques and methods of implementation within a Field Programmable Gated Array (FPGA) architecture. The selected candidate will develop, simulate, and test across multiple platforms with differing architectures.Basic Qualifications:A bachelor’s degree in electrical engineering or computer engineering (or related technical discipline) from an ABET accredited institute and seventeen (17+) years of relevant work history is needed. If candidate has an MS in a related field fifteen (15+) years of relevant work history is needed.Experience in FPGA firmware development from architecture through implementation, simulation, and hardware testing.Proven experience with hardware description languages such as VHDL or Verilog.Comprehensive understanding of digital signal processing techniques for communications and/or RF.Hands-on laboratory experience with instrumentation, test equipment, and debug/test methods for proving out FPGA development on hardware.Highly motivated personality with the ability to work independently and across a collaborative team environment.Requires the ability to maintain a TS/SCI clearance.Preferred QualificationsFamiliarity or experience with any of the following:Zynq UltraScale+ MPSoC / RFSoC ArchitectureVirtex UltraScale+ ArchitectureZynq-7000 SoC ArchitectureXilinx IP IntegratorOriginal Posting Date:2024-09-11While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $144,300.00 - $260,850.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos is seeking a Senior Principal Radar System’s Engineer to join a talented team of engineers and scientists within the RF & Intelligence Solutions Department. The department’s goals include comprehending, exploiting, and evaluating foreign threats. The department performs radio frequency (RF) design, custom hardware builds, algorithm development, and analysis across a variety of both research and development and operational tasks. The candidate selected for this position will support projects for the DoD, Intelligence Community, and other Prime contractors.Primary ResponsibilitiesThe Sr. Principal Radar Systems Engineer duties include performing systems requirements evaluation, functional studies, timeline analysis, trade studies, requirements allocation and interface definition, technical management, integration, system testing, and quality assurance. The candidate will promote development of innovative approaches, solutions, and architecture development. Frequent interaction with the customer through in-process reviews, customer visits and demonstrations are part of the role.Basic QualificationsA bachelor’s degree in electrical engineering or computer engineering (or related technical discipline) from an ABET accredited institute and seventeen (17+) years of relevant work history is needed. If candidate has an MS in a related field fifteen (15+) years of relevant work history is needed.Candidate must have a comprehensive understanding of RF transceiver system architecture and cascade analysisCandidate should have design experience working in bands from UHF to KaFamiliarity with software development, integration, and test and as well as requirements development and verification (modeling and simulation background a plus)Materials, production, and configuration management history is neededPrior work with Open Air Range integrationCandidate must have experience working with lab test equipment such as spectrum analyzers, network analyzers, oscilloscopes, etc.Candidate must understand fundamentals of antenna theory (types, designs, beam patterns, etc.)Candidate must be a US citizen and possess (as well as maintain) a secret clearance, with the ability to obtain a TS/SCI.Preferred QualificationsPreference will be given to candidates who possess one or more of the following qualifications:Position requires candidates to be capable of performing in a collaborative engineering environment working closely with a multidisciplinary team.Junior team mentoring is highly encouragedThe ideal candidate will have hands-on work in developing, documenting, and executing test processes and procedures for electronic and electromechanical products.Fundamental understanding of DSP concepts (matched filtering, coherent integration, etc.)Programming in at least one high-level language (MATLAB, C++, Python)Experience with Linux operating systemsExperience working/integrating RF transceivers with FPGA-based systems.Experience working with high-speed ADCs and DACsCandidates with TS clearance with SSBI are preferred but not requiredOriginal Posting Date:2024-09-10While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $144,300.00 - $260,850.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Defense Systems, is seeking a talentedJunior Electrical Hardware Design Engineerto join a diverse team to create unique solutions for complex problems. We have offices across the United States that provide responsive, cost-effective engineering, scientific, and IT solutions in the defense, space, cyber, and commercial fields. The ideal candidate will thrive in a learning environment that encourages leadership and technicalgrowth.The Electrical Systems Department is a design-focused group of engineers specializing in advanced hardware products. The individual selected for this position will be a design engineer with varied technical interests and demonstrated engineering skills. The individual must be a self-starter with experience working with inter-disciplinary teams to solve challenging technical problems. The engineer will work closely with electronics integrated into a diverse range of aerospace and military systems including manned/unmanned ground/air vehicles, missiles, defensive radars, and space systems.The selected candidate will be expected to execute in a fast-paced, small team environment through all phases of the product life cycle from concept development and detailed design through manufacturing, qualification testing, and post-delivery support. The engineer will be responsible for architecting, implementing, and testing printed circuit board assemblies (PCBAs) including power supply, mixed-signal, FPGA, and microcontroller designs. Additional skills such as signal integrity analysis, power distribution network design, basic VHDL proficiency, experience with technical trade studies, and evaluation of technology improvements are a plus.With a product focus, the individual is also expected to actively partner with other engineers, project managers, technicians, and the customer to develop solutions that adhere to a diverse set of requirements. Additionally, the engineer will support resolution of technical issues that are discovered during the manufacture and test of deliverable products. This will include troubleshooting board-level issues, assessing failures for root cause, and identifying corrective actions.The ideal candidate will thrive in a learning environment that encourages leadership and technical growth.Basic QualificationsBachelors degree in Electrical Engineering, Computer Engineering, or equivalent degree from an ABET-accredited institution with a 3.0 or higher GPAKnowledge of digital/analog/mixed signal electronics, components, and interface/communication standardsExperience in electronics design and test from architecture through implementationCapable of performing in a collaborative engineering environment working closely with multi-disciplinary teamsDemonstrated experience effectively communicating within a team environmentHands-on laboratory experience with instrumentation, test equipment, and debug/test methodsCandidates must be a resident of the North Alabama area or willing to relocate to the Huntsville - North Alabama, AL areaPreferred QualificationsPreference shown to candidates who possess aBachelor’s degree in Electrical Engineering, Computer Engineering, or equivalent degree from an ABET-accredited institution with a3.5 or higher GPAPreference shown to candidates who possess a Master's Degree inElectrical Engineering, Computer Engineering, or equivalent degree from an ABET-accredited universityPreference shown to candidates who have experience and/or working knowledge of:Design, test, troubleshooting, and manufacture of complex multi-layer electronic circuit card assembliesDigital design and troubleshooting in the area of embedded processors, microcontrollers, or VHDL-based FPGAsSwitched-mode power supply (SMPS) designMentor Graphics electrical engineering development toolsSecurity Requirements:Candidate must be a US Citizen and possess (and be able to maintain) a Final Secret Clearance or meet the eligibility to obtain (and maintain) a Secret Clearance.Original Posting Date:2024-09-03While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $53,950.00 - $97,525.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Defense Systems is seeking a talented Electrical Engineer to join a diverse team to create unique solutions for complex problems in our Test Instrumentation & Lethal Mechanisms Portfolio which develops Fuzing Systems (Ignition Safety Devices for igniting rocket motors, Electronic Safe & Arm Devices for initiating warheads), Proximity Sensors, as well as telemetry systems for rocket, missile and unmanned aerial system applications.These products are in current production in support of several weapons systems customers with increased production over the next several years.Primary Responsibilities.In this unique you will be responsible for the design, development, and testing of complex electronic hardware for defense applications. Projects will involve diverse technology areas including electronic design, payload integration, and system integration. We support our manufacturing team for existing products as well as launching new products in this role.Basic QualificationsBSEE degree plus 12 plus years of prior relevant experience including:Concept development and circuit design for a variety of productsExperience using Mentor Graphics or similar E-CAD schematic capture softwareDebugging electronic hardware with standard laboratory equipmentProduct manufacturing supportExperience leading design effort on new or existing products and bringing to marketExperience providing oversight, mentoring, and training to younger engineersExperience designing products for military systems and familiarity with military standardsMust be a US citizen and a resident of Huntsville, Alabama, or be willing to relocate to the Huntsville, Alabama area.Must possess (and be able to maintain) a final secret clearance or meet the eligibility to obtain (and maintain) a Secret Clearance.Preferred QualificationsFamiliarity with Altium schematic capture and PCB layout E-CADExperience designing and testing Electronic Safe & Arm Devices (ESAD) and Ignition Safety Device (ISD)C programming abilities for embedded micro-processorsGUI development for test interfaces using Python, LabView, etc.Excellent communication skillsOriginal Posting Date:2024-08-23While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Defense Systems is seeking a talented Electrical Engineer to join a diverse team to create unique solutions for complex problems in our Test Instrumentation & Lethal Mechanisms Portfolio which develops Fuzing Systems (Ignition Safety Devices for igniting rocket motors, Electronic Safe & Arm Devices for initiating warheads), Proximity Sensors, as well as telemetry systems for rocket, missile and unmanned aerial system applications.These products are in current production in support of several weapons systems customers with increased production over the next several years.Primary Responsibilities.In this unique you will be responsible for the design, development, and testing of complex electronic hardware for defense applications. Projects will involve diverse technology areas including electronic design, payload integration, and system integration. We support our manufacturing team for existing products as well as launching new products in this role.Basic QualificationsBSEE degree plus 8 years of prior relevant experience including:Concept development and circuit design for a variety of productsExperience using Mentor Graphics E-CAD schematic capture softwareDebugging electronic hardware with standard laboratory equipmentMust be a US citizen and a resident of Huntsville, Alabama, or be willing to relocate to the Huntsville, Alabama area.Must be a US Citizen, possess (and be able to maintain) a final secret clearance or meet the eligibility to obtain (and maintain) a Secret Clearance.Preferred QualificationsFamiliarity with Altium schematic capture and PCB layout E-CADC programming abilities for embedded micro-processorsGUI development for test interfaces using Python, LabView, etc.Excellent communication skillsProduct manufacturing supportOriginal Posting Date:2024-08-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Defense Systems is seeking a Principal Radar Engineer to join a talented team within the RF System Technologies Department. The department’s goals include radar system development, integration, and testing. These goals include the inhouse development of hardware subsystems to include T/R modules antennas, and digital receiver/ exciters using a combination of IRAD and customer funding. The department performs radar design, hardware builds, algorithm development, software development, HWIL testing and analysis across a variety of both research and development and operational tasks.Primary ResponsibilitiesThe candidate will support a broad set of phased array radar hardware and software design, prototyping, integration, testing, and analysis activities. Experience in following areas is desired:RF design – Up/Down converters, oscillators, analog and digital beamforming networks, RF cascades, transceivers, phased array antenna performance tradesSignal processing – Waveform design, matched filtering, detections processing, clutter rejection, target feature extractionCalibration – Far-field and/or near-field calibration techniques for AESAsTracking – Design and analysis of Kalman filters, IMMs, detection to track association varietiesRadar Resource Management – Scheduling techniques for optimally commanded the AESAs front end hardwareRF Test Equipment – Experience with RF troubleshooting equipment such as Vector Network Analyzers, oscilloscopes, and signal generatorsBasic QualificationsBS in Electrical Engineering or equivalent degree from an ABET-accredited institution.12+ years of experience in the design, development, and testing of Radar systems or 10+ with MS degree.Demonstrated performance in one or more of the experience areas.Must be a US citizen and be a resident of Huntsville, Alabama, or be willing to relocate to the Huntsville, Alabama area.Candidate must be a US Citizen and possess (and be able to maintain) a Final Secret Clearance.Preferred QualificationsMaster of Science in Electrical Engineering or equivalent degree from an ABET-accredited institution.Demonstrated performance in all the experience areas.Original Posting Date:2024-08-06While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Defense Systems currently has an opening in our Uncrewed Systems Integration and Test Team for a Communications Signal Processing Engineer to work in our Huntsville, AL office. This is an exciting opportunity to help DoD Uncrewed Systems pioneer new data communications technology ensuring mission success.Primary Responsibilities.The Communications Signal Processing Engineer will research and develop advanced signal processing algorithms and perform test and analysis of advanced protected (anti-jam [AJ] / low probability of detection [LPD]) waveforms, providing performance and vulnerability assessments to our DoD customers for existing and candidate UAS data link waveforms. Our team provides technical subject matter expertise (SME) for government product offices to aid in product improvement and acquisitions, thus ensuring our customers can cost-effectively maximize capability as new, advanced communications capabilities are sought.Basic QualificationsMS in Electrical Engineering or Physics plus 5 years of relevant signal processing experience in communications and/or Electronic Warfare (EW) environments.Requires excellent communication and organizational skills, attention to detail, and a strong background and demonstrated skills in the following:• General signal processing expertise (signal modeling, filter modeling, noise modeling, Fourier transforms, etc.)• Communications waveform modulation theory (PSK, QAM, etc.)• Spread LPD waveforms (DSSS, FHSS, MCSS, hybrid methods, etc.)• Signal detection theory (energy detection, feature detection, etc.)• Cyclostationary feature analysis (cyclic autocorrelation, cepstral analysis, etc.)• Basic MATLAB programming (cell arrays, structs, tables, graphics, MATLAB path, data import and export, etc.)• Object Oriented MATLAB programming (methods, properties, and their attributes; value and handle classes; object arrays; etc.)• Technical research experience (IEEE journals, etc.) and implementation of findings via algorithm development• Data analysis• Strong knowledge of RF concepts (RF testing, RF propagation, RF schematics, link budgets, etc.), especially in relation to over-the-air signal detection• Hands-on test equipment experience (spectrum/signal analyzer, signal/function generator, oscilloscope)• Technical writing and report/presentation generation with great attention to detail and professionalism (to formally convey analysis results to customers)The candidate must be a US citizen and possess (and be able to maintain) a Final Secret Clearance and meet the eligibility to obtain a Top-Secret Clearance.Must be a resident of Huntsville, Alabama, or be willing to relocate to the Huntsville, Alabama area.Original Posting Date:2024-08-09While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Defense Systems currently has an opening for a Senior RF Design Engineer supporting the RF Engineering portfolio in Huntsville, AL with the Aerospace Systems Group. This is an exciting opportunity to use your experience in RF and electrical design for advanced RF systems that provide critical information to customers.Primary Responsibilities:The successful candidate will perform radio frequency (RF) design, hardware builds, algorithm development, and analysis across a variety of both research and development and operational tasks. The candidate will help evaluate, select, integrate, and test commercial off the shelf (COTS) RF devices for forming complex RF transceiver systems. The ideal candidate will have an interest in supporting the full product life cycle from concept through prototype to production.Basic Qualifications:Degree in Electrical Engineering, Computer Engineer, Mathematics, or Physics with 4+ years of relevant experienceWorking Knowledge of RF cascade analysisStrong technical communication skills and the ability to work both independently and in a collaborative environment.Basic understanding of DSP concepts (match filtering, coherent integration, etc.)Candidate will live in Huntsville or be willing to relocate to Huntsville Alabama areaDesired Skills:Familiarity in any of the following tools is preferred but not required:C++ language (or other object-orientated language)experience with Real Time Operating Systems (RTOS),Python and Unix is preferred but not required.Security Requirements: Candidate must be a US Citizen and possess (as well as maintain) a Top Secret Clearance with the ability to obtain TS/SCI with CI PolyOriginal Posting Date:2024-07-19While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Defense Systems currently has an opening for a Senior RF Design Engineer supporting the RF Engineering portfolio in Huntsville, AL with the Aerospace Systems Group. This is an exciting opportunity to use your experience in RF and electrical design for advanced RF systems that provide critical information to customers.Primary Responsibilities:The successful candidate will perform radio frequency (RF) design, hardware builds, algorithm development, and analysis across a variety of both research and development and operational tasks. The candidate will help evaluate, select, integrate, and test commercial off the shelf (COTS) RF devices for forming complex RF transceiver systems. The ideal candidate will have an interest in supporting the full product life cycle from concept through prototype to production.Basic Qualifications:Degree in Electrical Engineering, Computer Engineer, Mathematics, or Physics with 8+ years of relevant experienceWorking Knowledge of RF cascade analysisStrong technical communication skills and the ability to work both independently and in a collaborative environment.Basic understanding of DSP concepts (match filtering, coherent integration, etc.)Candidate will live in Huntsville or be willing to relocate to Huntsville Alabama areaDesired Skills:Familiarity in any of the following tools is preferred but not required:C++ language (or other object-orientated language)experience with Real Time Operating Systems (RTOS),Python and Unix is preferred but not required.Security Requirements: Candidate must be a US Citizen and possess (as well as maintain) a Final Top Secret clearance with the ability to obtain TS/SCI with CI POLYOriginal Posting Date:2024-07-19While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Dynetics, is seeking a talented Project Engineer to support Defense and Civil Space Systems in the Space Division. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos Dynetics provides responsive, cost-effective engineering, scientific and IT solutions.As a core member of the team, you will play a valuable part in supporting and executing various program capabilities for a variety of customers. You will be required to support multiple tasks in parallel, productively contribute to and lead team environments, and communicate effectively to management, coworkers, and customers. You must also be self-motivated and highly organized with a focus on managing customer expectations with a constant goal of generating high quality products that exceed stakeholder expectations.Primary ResponsibilitiesThe Project Engineer will have a key impact on program execution and will:Directly support program management office in successful execution of all aspects of the program(s) including cost, schedule, procurement, integration, resource managementWork with technical leads to define and evaluate resources and schedule required to complete defined workParticipate in Make/Buy decisionsParticipate in applicable IPT meetings to assure technical integrationParticipate in review/preparation of variances, exceptions and/or waivers to requirementsAssist the systems engineering team with requirements management to assess conflicts, gaps, and adequate flow down and decomposition of the program requirementsParticipate in design/test/certification reviewsOther duties as assignedBasic QualificationsBS degree in Engineering from an accredited engineering school and a minimum of two (2) years of direct engineering experience, or a MS degree from an accredited engineering school and less than 2 years of direct engineering experienceDemonstrated strong verbal and written communication skills, be able to work in a team, and develop cooperative relationshipsAbility to track multiple tasks and prioritize work independentlySelf-motivation and quick learner to adapt to the broad array of subjects and issues encounteredDemonstrated experience with Microsoft Office software tools, including Project and VisioCandidate must be a resident of the North Alabama area or be willing to relocatePreferred QualificationsProject Engineering experience/background or a desire to learn project engineeringExperience with supply chain management and ability to work with suppliers to help them meet both hardware and non-hardware deliverable requirementsHave experience in mechanical manufacturing environments, testing, and/or product designOriginal Posting Date:2024-08-28While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Dynetics, is seeking a talented Project Engineer to support Defense and Civil Space Systems in the Space Division. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos Dynetics provides responsive, cost-effective engineering, scientific and IT solutions.As a core member of the team, you will play a valuable part in supporting and executing various program capabilities for a variety of customers. You will be required to support multiple tasks in parallel, productively contribute to and lead team environments, and communicate effectively to management, coworkers, and customers. You must also be self-motivated and highly organized with a focus on managing customer expectations with a constant goal of generating high quality products that exceed stakeholder expectations.Primary ResponsibilitiesThe Project Engineer will have a key impact on program execution and will:Directly support program management office in successful execution of all aspects of the program(s) including cost, schedule, procurement, integration, resource managementWork with technical leads to define and evaluate resources and schedule required to complete defined workParticipate in Make/Buy decisionsParticipate in applicable IPT meetings to assure technical integrationParticipate in review/preparation of variances, exceptions and/or waivers to requirementsAssist the systems engineering team with requirements management to assess conflicts, gaps, and adequate flow down and decomposition of the program requirementsParticipate in design/test/certification reviewsOther duties as assignedBasic QualificationsBS degree in Engineering from an accredited engineering school and a minimum of two (2) years of direct engineering experience, or a MS degree from an accredited engineering school and less than 2 years of direct engineering experienceDemonstrated strong verbal and written communication skills, be able to work in a team, and develop cooperative relationshipsAbility to track multiple tasks and prioritize work independentlySelf-motivation and quick learner to adapt to the broad array of subjects and issues encounteredDemonstrated experience with Microsoft Office software tools, including Project and VisioCandidate must be a resident of the North Alabama area or be willing to relocatePreferred QualificationsProject Engineering experience/background or a desire to learn project engineeringExperience with supply chain management and ability to work with suppliers to help them meet both hardware and non-hardware deliverable requirementsHave experience in mechanical manufacturing environments, testing, and/or product designOriginal Posting Date:2024-08-28While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.