Reliability Engineer Full-time, Permanent One-site Location: Bastrop, LAAt Drax, we are working towards a zero-carbon, sustainable future and you can help make this future a reality. So, what will you be doing As a Reliability Engineer you will provide the technical expertise on all matters of reliability engineering, assessment, and monitoring for all process equipment. You will carry out reliability studies on existing equipment and recommend needed improvements to Operations management in the areas of equipment philosophies, strategies and best practices for asset productivity. You will be the "go to person" for all matters of equipment reliability with a focus on enhancing equipment reliability through analysis along with some first response, day-to-day trouble shooting of failed equipment.Who you are Key Accountabilities:Develop and implement equipment asset plans using Reliability Centered Maintenance (RCM), and other reliability techniques. Apply engineering theory and practice to perform physical failure analysis, determine root cause of equipment failures and conduct equipment performance evaluations Analyze equipment trends & historical data to recommend and justify improvements to obtain lowest life cycle cost. Determine how process variation and equipment operation can impact equipment reliability Promote consistency by standardizing equipment procedures & operations within area of responsibilitySupport capital projects by participating in setting equipment criteria and specifications to optimize equipment/system reliability and life cycle cost. Also provide technical support for fabrication, installation, and start-up of new critical equipment. Participate in production turn-around/shutdown teams providing input into needed equipment inspection and repair procedures Participate in maintenance and reliability networks, sharing best practices, successes and failures. Participate in interviewing, hiring and mentoring of new reliability co-ops and engineers. Participate in continuing education courses, professional organizations (e.g. SMRP) and reliability conferences to stay current with, and evaluate, emerging technologies.Knowledge, Skills and Experience required:B.S. degree or higher inMechanical Engineering preferred Downtime data analysis techniques and statistical interpretation skills Failure analysis including preservation of evidence techniques Maintenance and reliability best practices including the work management process Rotating equipment and alignment techniques Fundamental Materials Science, including material selection and properties Lubrication and fundamentals of interpreting oil analysis results Vibration analysis and interpretation of vibration analysis reports Fundamentals of nondestructive testing, including thermography Root Cause Failure Analysis (RCFA) and Failure Mode and Effect Analysis (FMEA) Engineering design standards and their application Cost/Capital analysis and justification Reliability Engineers are encouraged to get CMRP certified (Certified Maintenance & Reliability Professional)What’s it like to work at Drax A competitive salary, with opportunities to grow your experience and build an exciting career.A supportive team environment where you will continuously learn and grow.Great health and dental benefits starting from day one at Drax!A 401K matching plan to support your personal and family goals (also starting from day one at Drax!).A company bonus plan which rewards overall Drax performance, safety, and scorecard achievement.If this role sounds good, we’d love to hear from you! Click "Apply now"Together, we can make it happen

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Associate Dentist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Take care of your community while participating in activities to promote a positive image of the company! Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc. Love working with kids (they make up 70% or more of our patient base) Associate Dentists are responsible for providing dental services to patients with the support of their team. Our practice has: DentaPro software Digital x-ray and Panorex units Fiber-optic handpieces Yearly OSHA and HIPPA and Emergency Management training Ratio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per provider Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location) Office flow: average 10-12 operative patients and 20-25 hygiene patients State insurance plans, PPO and out-of-network payor mix ***This opportunity provides growth and development through mentoring and collaboration*** What we offer: Guaranteed daily rate up to $1200 with upcapped earning potential. Sign on bonus Student loan repayment assistance No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications, and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, DEA, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults We value teamwork, mutual respect, and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Overview: Norman Regional Health System has emerged as a beacon of workplace excellence. Norman Regional Hospital System is a community hospital system nestled at the Southern border of the Oklahoma City metro area. We have an innovative cardiovascular program and we are looking for caring knowledgeable Registered Technologist to expand cardiovascular program. We will soon be moving to our new state of the art Critical Care Tower and will have three Cath Lab suites, one Electrophysiology suite, one Hybrid suite, two treatment rooms and seventeen Same Day Surgery rooms. We work with a team of nine cardiologist and two electrophysiologist.Norman Regional Health System Cardiology AwardsAmerican College of Cardiology Chest Pain Center with PCI and Resuscitation AccreditationAmerican College of Cardiology NCDR Registry Gold AwardWomen’s Choice Award in Heart CareIntersocietal Accreditation Commission (IAC) Echo AccreditationAmerican Association Cardiovascular and Pulmonary Rehabilitation (AACVPR) Accreditation Responsibilities: Job SummaryPrepares equipment before and during procedures.Identifies and assesses patient condition. Prepares, positions and provides patient care.Establishes and maintains a sterile environment.Professional PracticeServes as preceptor for new hires and radiology students and participates in the orientation of new staff.Uses downtime appropriately by stocking rooms, checking equipment, and other delegated tasks by Charge person or manager.Maintains strong professional working relationship with the physicians and leadership to facilitate excellent patient care.QualificationsComplete Cath Lab RT Orientation within 6 months. Complete all competencies listed in department policy within 6 months.EducationCompletion of 24 month formal program or military program of Radiologic Technology with American Registry of Radiologic Technologist eligible and/or current RCIS.ExperiencePrevious Procedural Area experience preferred.Licensure/Certification/Registration/ETC.American Registry of Radiologic Technology. Registered and/or RCIS. Cardiovascular (CV) or (CI) and/or (VI) certification preferred. Basic Life Support (BLS) training or re-training is required during orientation prior to providing patient care. Current Basic Life Support (BLS) is required to be maintained thru re-training for duration of employment. ACLS training must be achieved within 6 months of hire and maintained through duration of employment. Qualifications: Graduate of an accredited Radiographic Program orGraduate of an accredited Cardiovascular ProgramOne year of experience working in an Cath Lab preferredRegistered as a Radiographer with the American Registry of Radiological Technologist - ARRT orRegistration from the Cardiovascular Credentialing International – RCISBasic Life SupportAdvanced Life Support within 6 months of hireCompensation$27.84-$45.46/hr based on previous work experienceBenefits include medical, dental, vision, short-term disability, long-term disability, life insurance, paid time off (PTO), paid holidays, tuition reimbursement, scholarship opportunities, retirement plans, free parking, and opportunities for advancement

SonderMind is a leading mental health care platform that is revolutionizing therapy services. We seek compassionate and highly skilled licensed mental health therapists to join our expanding network.As a SonderMind counselor, you will have the opportunity to make a meaningful impact on the lives of individuals seeking therapy while enjoying the flexibility and support of our innovative platform. Our therapists are committed to delivering best-in-class care to all individuals by focusing on high-quality clinical outcomes – and finding new ways to use data to help people get better.At SonderMind, we enable clinicians to thrive.Benefits of Joining SonderMind:Flexibility: Enjoy the freedom to set your own working hours and maintain a healthy work-life balanceFree and stress-free credentialing with major insurers:We have streamlined the credentialing process and handle all the hard stuff for you so that you can expand your practice by accepting insurance from major payors in your state in weeks, not monthsClinical Autonomy: SonderMind values your clinical expertise and empowers you to make informed decisions about treatment approachesSupportive Community:Access a network of like-minded therapists, dedicated support from our platform, and ongoing opportunities for collaboration and growthGuaranteed Pay:We handle all the billing for you and guarantee pay bi-weekly for completed sessions-including no-showsThoughtful client matching and dedicated coaches to grow your practice:We help you get paired with individuals who are ideal clinical matches so that you can control and personalize your caseload, and a dedicated coach to help you help your clients, no matter what your specialty, from pediatric to geriatric mental health, trauma, anxiety or addiction, we help you help othersProfessional Development:SonderMind is committed to helping therapists grow professionally, offering ongoing training and resources to enhance skillsAbsolutely no fees or membership charges: We don’t charge you to deliver care, and all of the features, access, tools, and resources you get come free of chargeMental Health Therapist Requirements:LicensedLICSW, LMFT, LMHC, or LPin Washington(required)Masters or doctorate-level degree in area of practice(required)Pay: $80-$111 per hour. Pay rates are based on the provider license type, session location, and session types.Job Types: Full-time, Part-time, ContractPay: $80.00 - $111.00 per hour

Clean Harbors is looking for an OTR Class A Dry Van Driver to join their safety conscious team El Dorado. This route runs fromEl Dorado, AR to Midwestern States ( OH/MI/IL/MN)and averages 2500-3000miles per week. Requires 10-14 days out. About the role: Drivers average $80-$110K per year$7,500 sign-on-bonus availableBi-Weekly home timeCompensation includes hourly wages (all on-duty non-driving time) and mileage payEnsures that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all timesOperates tractor trailer units and other vehiclesAdheres to weights and ensures proper utilization of the unitsEnsures proper loading and unloading of hazardous waste/non-hazardous waste; Properly secures the loadsPlacards vehicle in accordance to Company and Department of Transportation (DOT) requirements/regulationsMaFor additional information about driver career opportunities, please call us at 72-Drive ). Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. *CHintains daily logs, time sheets, expense reports, dispatch and trip reports as well as vehicle inspection reportsClass A CDL12+ months of Class A driving experienceHAZMAT and TANKER endorsementsAbility to effectively use required technology such as mobile applications and computer software

Clean Harbors/Safety-Kleen is looking for an OTRClass A Tanker/ Vac Driver to join their safety conscious team in El Dorado, AR. This position is a “flex” position and could run anywhere throughout the Midwest to the Northeast averaging 2500-3000 miles per week. Must have the ability to travel in Canada (passport required). Willing to stay out 2-3 weeks at a time. This position will be cross trained in a variety of equipment. Drivers average $90-$120K per year$7,500 sign-on-bonus availableBi-Weekly home timeCompensation includes hourly wages (all on-duty non-driving time) and mileage pay Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOwn Part of the Company with our Employee Stock Purchase PlanPaid time off, company paid training, and tuition reimbursementPositive and safe work environments Key Responsibilities:Ensures that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all timesOperates tractor trailer tanker unitsAdheres to weights and ensures proper utilization of the unitsEnsures proper loading and unloading of hazardous waste/non-hazardous waste; Properly secures the loadsPlacards vehicle in accordance to Company and Department of Transportation (DOT) requirements/regulationsMaintains daily logs, time sheets, expense reports, dispatch and trip reports as well as vehicle inspection reportsFor additional information about driver career opportunities, please call us at 72-Drive ).Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CHRequired Qualifications:12+ months of Class A driving experience3+ months of tanker experienceHAZMAT and Tanker endorsementsAbility to climb and work from heightsAbility to lift and carry 50lbs+Ability to effectively use required technology such as mobile applications and computer softwareClass A CDLFor additional information about driver career opportunities, please call us at 72-Drive ).Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CHClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH

Pay & DetailsMultiple Term Options AvailableRanging from 1 - 4 yearsLease terms will be based upon the model, year, and mileage of the truck.Lease Payments - $649 per week and upPayments will be based on the model, year, and mileage of the truck$1.26 - $1.50 CPM plus FSC - Depending on Location$70,000 to $93,600 Annual Average Take Home - Depending on LocationLease Program Benefits & AdvantagesNo Credit Check | No Money Down1099 - No taxable benefits availableMultiple Term Options AvailableLate-Model Equipment

Pellet Mill OperatorFull-time, PermanentOn-siteLocation: Bastrop, LAAt Drax, we are working towards a zero-carbon, sustainable future and you can help make this future a reality.If you are a team player, adaptable to change, and have a hands-on attitude, join the team as the Pellet Mill Operator.So, what will you be doing In this role, you will be responsible for providing clean up support and assistance as needed throughout the plant. Working in a fast-paced environment, you will stay active in this role helping our production teams to reach targets, while maintaining a high standard of safety.The core responsibilities and duties include:Constantly reviews the operation of pellet mills, hammer mills and related equipment to monitor production/quality, anticipating and solving problems in a timely manner and identifying opportunities for improvement Follows standard operating instructions/procedures in the performance of all operator areas including start-up, shutdown and normal operations Ensure standards of safety and housekeeping are maintainedPerform basic maintenance to keep equipment in clean, good working order Commitment to work safely and consistently demonstrate safe behaviors & attitudeAbility to solve problems safely, logically, quickly and confidentlyTo work flexibly within their competence and provide effective communications within and external to their business unitComplete logs and records where necessary to record plant checks, etc.Covers other positions as necessary to meet the needs of the businessWillingness to work flexible hours including unscheduled overtime, weekends and holidaysOperate equipment to start, stop, or regulate systemsInspect equipment, recording or reporting damage and mechanical problemsRecord or report operational data such as readings on meters, instruments, and gaugesAbility to perform repetitive & physically demanding tasks for extended periods (lifting, walking, working at heights, climbing, pushing, twisting, stooping)Ability to understand risk and follow detailed JRA/TRAs to avoid work site hazardsWho you are Do you have experience in heavy industry and a high school diploma or equivalent Are you able to operate mobile equipment safely and efficiently Then keep reading.What we Offer:A competitive pay, with opportunities to grow your experience and build an exciting career.A supportive team environment where you will continuously learn and grow.Great health and dental benefits starting from day one at Drax!A 401K matching plan to support your personal and family goals (also starting from day one at Drax!).A company bonus plan which rewards overall Drax performance, safety, and scorecard achievement.If this role sounds good, we’d love to hear from you! Click "Apply now"Together, we can make it happen

Reliability Engineer Full-time, Permanent One-site Location: Bastrop, LAAt Drax, we are working towards a zero-carbon, sustainable future and you can help make this future a reality. So, what will you be doing As a Reliability Engineer you will provide the technical expertise on all matters of reliability engineering, assessment, and monitoring for all process equipment. You will carry out reliability studies on existing equipment and recommend needed improvements to Operations management in the areas of equipment philosophies, strategies and best practices for asset productivity. You will be the "go to person" for all matters of equipment reliability with a focus on enhancing equipment reliability through analysis along with some first response, day-to-day trouble shooting of failed equipment.Who you are Key Accountabilities:Develop and implement equipment asset plans using Reliability Centered Maintenance (RCM), and other reliability techniques. Apply engineering theory and practice to perform physical failure analysis, determine root cause of equipment failures and conduct equipment performance evaluations Analyze equipment trends & historical data to recommend and justify improvements to obtain lowest life cycle cost. Determine how process variation and equipment operation can impact equipment reliability Promote consistency by standardizing equipment procedures & operations within area of responsibilitySupport capital projects by participating in setting equipment criteria and specifications to optimize equipment/system reliability and life cycle cost. Also provide technical support for fabrication, installation, and start-up of new critical equipment. Participate in production turn-around/shutdown teams providing input into needed equipment inspection and repair procedures Participate in maintenance and reliability networks, sharing best practices, successes and failures. Participate in interviewing, hiring and mentoring of new reliability co-ops and engineers. Participate in continuing education courses, professional organizations (e.g. SMRP) and reliability conferences to stay current with, and evaluate, emerging technologies.Knowledge, Skills and Experience required:B.S. degree or higher inMechanical Engineering preferred Downtime data analysis techniques and statistical interpretation skills Failure analysis including preservation of evidence techniques Maintenance and reliability best practices including the work management process Rotating equipment and alignment techniques Fundamental Materials Science, including material selection and properties Lubrication and fundamentals of interpreting oil analysis results Vibration analysis and interpretation of vibration analysis reports Fundamentals of nondestructive testing, including thermography Root Cause Failure Analysis (RCFA) and Failure Mode and Effect Analysis (FMEA) Engineering design standards and their application Cost/Capital analysis and justification Reliability Engineers are encouraged to get CMRP certified (Certified Maintenance & Reliability Professional)What’s it like to work at Drax A competitive salary, with opportunities to grow your experience and build an exciting career.A supportive team environment where you will continuously learn and grow.Great health and dental benefits starting from day one at Drax!A 401K matching plan to support your personal and family goals (also starting from day one at Drax!).A company bonus plan which rewards overall Drax performance, safety, and scorecard achievement.If this role sounds good, we’d love to hear from you! Click "Apply now"Together, we can make it happen