Hayden, AZ 85135 • (27 miles) • Full Time • 10/5/2026

Note: This position is only for 1-2 months with potential to extend on a month-to-month basis, no guarantees. More labor focused role. Schedule: Tuesday to Friday, four 10 hours shifts starting at 6:30 AM POSITION OVERVIEWTo support the Metallurgical Engineering staff to perform investigatory and daily testing, monitor the concentrator mass consumables inventory, and maintain process monitoring equipment in the concentrator.ESSENTIAL JOB DUTIESAbility to prepare samples and complete basic sample analysis procedures following proper guidelinesMaintain the x-ray on stream analyzers to include basic electrical maintenance, mechanical maintenance, as well as system sampling and calibrationMaintain the on-stream sampling systems to include piping and vacuum pump systemsMaintain the control x-ra

Tucson, AZ 85710 • (27.3 miles) • Full Time • 10/5/2026

Scope of Position: The Maintenance Engineer is responsible for skilled maintenance and repair duties for the property, including but not limited to HVAC, electrical and plumbing tasks, and preventive maintenanceprojects.Compensation: The pay range for this position is $17.50 - $18.00 hourly.Position Responsibilities and Qualifications: Education & Experience: High School diploma or trade school certification is preferred, and/or equivalent work experience. Certification preferred: Senior manager and/or other certification as required by franchise. Have valid driver’s license from appropriate state and MVR in good standing. General knowledge of machines and maintenance and repair using basic hand and power tools preferred.Physical Demands: Long hours sometimes required, including nights and

Tucson, AZ 85713 • (31.6 miles) • Full Time • 10/5/2026

About FedVet Construction: FedVet Construction is a Service-Disabled Veteran-Owned Small Business (SDVOSB) federal general contractor with active contracts across California, Nevada, Arizona, Hawaii, and Guam. Our portfolio includes construction and renovation projects for the Department of Veterans Affairs (VA), NAVFAC, USACE, National Park Service, and Bureau of Reclamation. We are veteran-led, safety-first, and proud to serve the federal agencies that serve our nation. Job Summary: FedVet Construction is seeking an experienced Quality Control Manager (QCM) for an active VA construction project at the Southern Arizona VA Health Care System (SAVAHCS), located at 3601 S. 6th Street, Tucson, Arizona. The project involves interior renovation of an Interventional Radiology suite (Building 38,

Tucson, AZ • (31.9 miles) • Full Time • 10/5/2026

ABOUT ROCKET LABRocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us.SPACE SYSTEMSRocket Lab's Space Systems division builds complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space including solar panels, flight software, star trackers, optical systems, separation systems, and radios.The Space Systems division has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. We have built spacecraft,

Tucson, AZ • (31.9 miles) • Full Time • 10/3/2026

Boeckeler Instruments is hiring a hands-on Quality Control Specialist to perform initial and final QC testing on our precision sample-preparation instruments before they ship to customers worldwide. This is an individual-contributor role, not a supervisory or management position: you will work directly with the instruments on the bench, verify they meet written specifications, and document what you find clearly enough that Engineering and Production can act on it.We are specifically looking for someone who digs into why a test failed, not just whether it passed, and who will speak up and propose a better way when the current process isn't working.Key ResponsibilitiesPerform initial QC testing on in-process components and final QC testing on finished instruments before they ship, verifying

Tucson, AZ 85756 • (37.9 miles) • Full Time • 10/2/2026

CNC Programmer IOverview:We are looking for a CNC Programmer who can take an aerospace part from the drawing or solid model to a stable production process. This is not a desk-only programming job. You will be at the machine for setup, prove-out, first-piece inspection, and troubleshooting, working directly with machinists, Quality, and Engineering. A good program is not just code that runs. It must be safe, repeatable, clearly documented, and practical for the people running the job.Responsibilities:• Program new and repeat work in Mastercam for Haas machines and other assigned equipment.• Start every job with the current drawing, model, traveler, specifications, and customer notes. Confirm the revision before any programming work begins.• Decide how the part will be made, including the op

Tucson, AZ 85713 • (31.6 miles) • Full Time • 10/2/2026

COMPANY OVERVIEW:Certerra Subsurface Imaging Inc (formerly Hydrogeophysics Inc) is a full-service geophysical consulting company. We work across the world and specialize in mining solutions, environmental concerns and leak detection. We are passionate about contributing to the sustainable development of the communities we serve.We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms.With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the su

Tucson, AZ 85756 • (37.9 miles) • Full Time • 10/1/2026

Krosswood Doors is hiring a Production Superintendent to run the floor in an assigned production department ? the people, the schedule, the standards, and the results. This is a floor leadership job, not a desk job. You spend your day in the department with your team, making the calls in real time and owning what comes off the line.We build doors that people live with for decades, and we care about doing it safely, consistently, and better each quarter. If you are the kind of leader who walks the floor, coaches in the moment, and can point to numbers that improved because you were there, we would like to meet you.Before You Apply: What This Job Is Really LikeYou will be on the floor and on your feet for most of the day. This is not an office role.Our plant is not climate controlled. Summer

Tucson, AZ 85743 • (31.5 miles) • Full Time • 10/1/2026

Refrigeration Installation and Service TechnicianArizona Restaurant Supply, Inc. is expanding rapidly, and we urgently require talented refrigeration installers to join our team and support this continued growth!Arizona Restaurant Supply, Inc. is the premier supplier of commercial kitchen and restaurant equipment, offering design services and professional installations. We partner with General Contractors throughout the Southwestern US on commercial kitchen projects for facilities like casinos, hospitals, schools, hotels, and restaurants. Our installations include walk-in coolers/freezers, ice machines, and custom built-in refrigeration for kitchens, bars, and warehouses.Core Responsibilities:Lead the start-up and commissioning of new refrigeration systems, including parallel racks and sin

Tucson, AZ • (31.9 miles) • Full Time • 10/1/2026

HVAC Sheet Metal ForemanAtlantic Pacific Standard, LLC (APS) is seeking an experienced HVAC Sheet Metal Foreman to lead commercial and government HVAC sheet metal projects. This is a hands-on leadership position for an experienced professional who can effectively supervise field crews while maintaining high standards for quality, safety, productivity, and schedule performance.Position ResponsibilitiesSupervise and coordinate HVAC sheet metal crews on commercial, municipal, and government construction projects.Plan daily work activities, assign manpower, and coordinate materials, equipment, and tools.Read and interpret mechanical plans, specifications, shop drawings, and HVAC ductwork layouts.Oversee fabrication and installation of HVAC ductwork, fittings, supports, hangers, dampers, louver

Tucson, AZ • (31.9 miles) • Full Time • 9/30/2026

Summary:The main function of a mechanical engineer is to research and investigate the design, functionality and maintenance of mechanical products, equipment, systems and processes. A typical mechanical engineer has the ability to make engineering drawings, and read and interpret blueprints.Job Responsibilities:• Research, design, develop, manufacture, and test tools, engines, machines and other mechanical devices.• Research and analyze customer design proposals, specifications, manuals to determine time and cost feasibility to complete projects.• Investigate equipment failures and difficulties to diagnose faulty operation and make recommendation to maintenance crew.• Assist drafters in developing the structural design of products using tools, equipment or software.Skills:• Creativity, ver

Tucson, AZ 85756 • (37.9 miles) • Full Time • 9/30/2026

Krosswood Doors is hiring a Production Superintendent to run the floor in an assigned production department the people, the schedule, the standards, and the results. This is a floor leadership job, not a desk job. You spend your day in the department with your team, making the calls in real time and owning what comes off the line.We build doors that people live with for decades, and we care about doing it safely, consistently, and better each quarter. If you are the kind of leader who walks the floor, coaches in the moment, and can point to numbers that improved because you were there, we would like to meet you.Before You Apply: What This Job Is Really Like:You will be on the floor and on your feet for most of the day. This is not an office role.Our plant is not climate controlled. Summer

Tucson, AZ 85705 • (26.3 miles) • Full Time • 9/30/2026

About Alta E&I:Alta Environmental & Infrastructure is one of Arizona’s fastest-growing engineering firms, with nearly 250 employees across the state. We’re 100% Arizona owned and managed, which means you’ll never feel like a number here. Our team delivers a full spectrum of services - civil engineering, surveying, geotechnical and materials testing, environmental, and EHS - giving you exposure to many paths and projects.Alta is big enough to offer opportunity, and advanced technology - yet small enough that you’ll know your team, see your impact, and have leadership that knows you.We’re proud to be a trusted partner to some of the nation’s largest corporations, developers, and public agencies - helping to build the future, while also protecting it through environmental stewardship and sust

Tucson, AZ 85716 • (26.6 miles) • Full Time • 9/29/2026

Sensor Validation EngineerJob DescriptionWho we are: Lunewave Inc. is a privately held technology company developing disruptive antenna and radar sensor technology by leading experts in millimeter wave frequency engineering.Our products are geared towards a variety of markets including automotive, telecommunications, aerospace, and research for applications such as autonomous transportation, 5G delivery, and drones. Description Summary: The Sensor Validation Engineer will have experience validating high bandwidth sensors using rigorous data collection and analysis methods. This employee will work closely with the algorithm and software teams to design and execute tests for evaluating the radar sensors performance and reliability. They will be expected to perform root cause data analysis an

Tucson, AZ • (31.9 miles) • Full Time • 9/29/2026

The Level 3 Quality Control Inspector is a senior-level position responsible for the most technically demanding inspection work performed at CEI, including full surface plate layouts, new product introduction, and advanced CMM programming. This role serves as a senior technical resource on the inspection floor, resolves complex inspection problems independently, and mentors Level 1 and Level 2 Inspectors within an AS9100-certified quality system. Advancement to Level 3 is qualified by portfolio review of demonstrated work.Essential Job Functions:Conduct full surface plate layouts, including castings and complex geometriesPerform inspections using the air bearing table inspection gaugeConduct NPI first article, in-process, and final inspectionResolve first article and setup problems in dire

Tucson, AZ 85713 • (31.6 miles) • Full Time • 9/27/2026

Description: About Tolin MechanicalFounded in 1948 in Denver, Colorado, Tolin Mechanical is a trusted HVAC contractor with locations across Colorado, Arizona, and the Mid-Atlantic. Our team is made up of skilled engineers, HVAC technicians, sales, operations, and support staff who take pride in delivering high-quality service. We provide centralized support from our Denver headquarters, so our field teams can focus on doing what they do bestsolving problems and keeping clients comfortable. Learn more at www.tolin.comGeneral Description: Tolin Mechanical, an established, well recognized and respected HVAC service contractor, is looking for an experienced Industrial Chiller Technician to join one of our Project Team based out of Tucson. We are seeking a candidate who meets the qualifications

Tucson, AZ 85751 • (25.1 miles) • Full Time • 9/26/2026

OverviewFor over 40 years, Canyon Ranch has been a trailblazer in integrative wellness and hospitality. With iconic properties in Tucson and Lenox, and a new destination opening in Austin in the fall of 2026, we create life-changing experiences for guests through world-class service, innovative wellness programming, and extraordinary hospitality.ResponsibilitiesThe Quality Assurance Specialist helps ensure information is accurate, complete, and up to date across Canyon Ranch systems. This role reviews records, transactions, and guest interactions; researches and corrects errors; and identifies trends that can improve quality, training, and business processes.Quality Review: Audit records, transactions, conversations, and system information for accuracy and compliance with Canyon Ranch stan

Tucson, AZ 85705 • (26.3 miles) • Full Time • 9/26/2026

Job SummaryProvide field coordination and oversight of a specific crew or crews. This position is responsible for overall safety, materials, reporting, leadership, employee communication, and productivity measures.ResponsibilitiesReview plans and permitsSupervise, train, and develop work crews, provide input and assist crews when needed in operating other equipment and/or assisting the laborers out in the fieldMaintain a safe worksite and enforce safe work practices by following company rules and OSHA regulations, leading crew pre-task planning, addressing employee concerns, and hazard abatementTake action to avoid potential hazards and obstructions such as utility lines, other equipment, other workers, traffic, and falling objectsEnsure that materials, equipment, and tools are safely load

Tucson, AZ 85705 • (26.3 miles) • Full Time • 9/26/2026

This position will require access to ITAR and/or EAR controlled technical data, technology or source code, and requires that all individuals in this role be authorized to access such information. General Description:The Production Technician is an hourly, non-exempt position reporting to the Production Supervisor within their area of assignment. The Production Technician is responsible for working on production projects that require a higher level of experience, assisting in the training of operators in the proper processing of product, and working with engineers in the transition of jobs from development to production. The Production Technician also performs the general work of a Production Operator. This position requires a safety and quality conscious person who is energetic and goal or

Tucson, AZ 85719 • (26.8 miles) • Full Time • 9/26/2026

Benefits:Competitive salaryDental insuranceEmployee discountsFlexible scheduleFree food & snacksHealth insuranceOpportunity for advancementVision insuranceWe are in KNEAD of a Commissary Food / Pastry Production team member All team members are included in our Team Tip Pool and make $16-$18/hr after training! Not only are we Tucson born and bread, we are a full scratch house and our food is made and prepared fresh daily! Why should you apply?Fast-paced, family-like environmentMorning shifts – get your day done earlyFree shift meal and employee discountFree daily loaf of our scratch-made bread (and all the bread puns you can handle)Full-time employees can take advantage of Health, Dental, and Vision coverageWhat will you do?Prepare the fresh, scratch-made ingredients that are at the core of

Tucson, AZ 85743 • (31.5 miles) • Full Time • 9/26/2026

Description: Location: Tucson, AZ (onsite with hybrid flexibility). Relocation assistance available.As a Board Designer, you'll design and develop advanced embedded hardware that powers next-generation avionics and autonomous aerospace systems. You'll play a key role in delivering complex electronic designs from concept through production while collaborating closely with hardware, FPGA, embedded software, and manufacturing teams.GuideTech is a subsidiary of Palladyne AI (NASDAQ: PDYN), a U.S.-based defense and industrial technology company that delivers embodied AI-powered collaborative autonomy solutions, advanced avionics, precision-manufactured components, UAVs, and advanced aerospace design services.At GuideTech, you'll contribute to technologies that support a diverse range of aerospa

Tucson, AZ 85756 • (37.9 miles) • Full Time • 9/25/2026

*Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.*Job Title: Fly-By-Wire & Secondary Control System EngineerJob Location: Wichita, KSWhat are your contributions to the team?Perform the integration of the FBW & Secondary Flight Controls system on the aircraft.Support the development of concepts, design approach and philosophy with the Flight Control system supplier.Perform/Review analysis to evaluate concepts feasibility.Develop, validate and verify technical requirements of the Flight Control System.Review/Prepare technical requirementsReview/Prepare test proceduresExecute test rig and/or aircraft testingReview/Prepare test reports in support of certification activitiesResolve problems a

Tucson, AZ 85756 • (37.9 miles) • Full Time • 9/25/2026

Sion Power, the global leader in the development of a new generation of high-energy, rechargeable lithium batteries for portable power is currently searching for a Cell Assembly Process Engineer to be based at its research and development facility in Tucson, Arizona. Sion's exciting new technology package yields a battery system with the highest theoretical gravimetric and volumetric energy densities of any battery and offers significant improvements in performance over current rechargeable batteries.Position SummaryThe Cell Assembly Process Engineer will be responsible for establishing and maintaining a production process for large area cell assembly for Sion Power's proprietary lithium metal batteries. This position involves establishing and maintaining cell manufacturing processes on bo

Tucson, AZ 85710 • (27.3 miles) • Full Time • 9/25/2026

Benefits:401(k)401(k) matchingDental insuranceHealth insuranceVision insurance Airtronics is a US Government Contractor specializing in the manufacturing, machining, repair and overhaul of products in support of various U.S. Department of Defense Agencies. We are looking for a Quality Assurance Inspector. Position Overview: The Quality Inspector will be responsible for inspecting parts and assemblies to ensure compliance with customer specifications and internal quality standards. The ideal candidate will be experienced with common inspection tools and processes and bring a strong understanding of industry standards. Key Responsibilities:Perform in-process and final inspections on machined components and assemblies.Use precision measuring tools such as calipers, micrometers, height gauges,

Benson, AZ 85602 • (37.9 miles) • Full Time • 9/25/2026

Join Arizona G&T Cooperatives as a Protective Relay and Automation Engineer and immerse yourself in an exciting opportunity to shape the future of the energy sector. By leveraging innovative technologies, you will play a crucial role in enhancing system reliability and safety, pushing the boundaries of engineering excellence. Collaborate with a team of forward-thinking professionals who are dedicated to solving complex challenges and driving transformative advancements in energy automation. This position offers a unique chance to contribute to cutting-edge projects, impacting both local communities and the industry at large.As part of a company that values integrity and smart solutions, you will find fulfillment in being at the forefront of energy innovation. Apply now to elevate your care

Tucson, AZ 85741 • (24.1 miles) • Full Time • 9/24/2026

Position Overview:We are seeking an experienced Mechanical Technician with a strong background in vacuum technology, mechanical assembly, and installation. The successful candidate will be responsible for the construction, maintenance, and installation of Emperion Vacuum Coating Systems with minimal supervision, ensuring high precision and attention to detail.Key Responsibilities:Assembly of Vacuum Coating Equipment:Read and interpret technical schematics, air schematics, build diagrams, and assembly instructions accurately.Handle and prepare vacuum mating surfaces and flanges, ensuring correct installation and surface preparation.Read vacuum gauges and apply basic principles of vacuum operation.Perform delicate assembly tasks involving high-precision sensor circuits and vacuum systems.Ass

Tucson, AZ • (31.9 miles) • Full Time • 9/24/2026

Quality Control InspectorHiring Immediately in Tucson, AZPay: $20.00–$30.00/hour + OT + Shift DifferentialsLocation: Tucson, AZSchedule: Multiple shifts available (Day, Swing, Night)Job Type: Full-Time | Contract-to-Hire or Direct HireNOW HIRING: Skilled Quality Control InspectorsJoin a high-performance manufacturing team where your precision and eye for detail will be valued and rewarded. We’re looking for skilled Quality Control Inspectors to help ensure that every part produced meets strict industry standards for accuracy and performance.This is a great opportunity for experienced professionals who are passionate about quality or for strong candidates ready to level up in a growing, stable industry.Perks & Benefits:Weekly Pay – Get paid fast, every Friday.Competitive Starting Pay: $20.0

Tucson, AZ 85755 • (15.1 miles) • Full Time • 9/24/2026

Job Title: Associate Manufacturing Operator - 3rd ShiftLocation:Tucson, AZ 85755Duration: Contract - 12 monthsPay Range: $20.61/hr with 3rd shift differentialJob DescriptionWe are seeking an Associate Manufacturing Operator to join our 3rd shift team. The ideal candidate will have experience in manufacturing or assembly operations and a proven ability to meet production, quality, and safety standards in an overnight shift environment.Shift & Schedule:Two openings on 3rd shift.Sunday night through Thursday night, 10:00 PM – 6:30 AM.Work Areas:Large Bottles – Formulation and filling of multi-liter reagent products.Dispenser Build – Manual assembly of reagent dispensers used in diagnostic assays and operation of automated dispenser assembly equipment.Kit Pack – Labeling, assembling, and packa

Tucson, AZ 85737 • (16.5 miles) • Full Time • 9/24/2026

Electro-Mechanical Technical Operator Tucson, AZ | 2nd Shift (Mon-Fri, 2:00 PM - 10:30 PM)$23/hr during training (30-60 days on 1st shift) + $2/hr shift differential Join a Team Powering the Future of Aerospace We're seeking an experienced electronics professional who excels at component-level troubleshooting, schematic interpretation, and precision soldering. In this role, you'll repair, test, and overhaul critical aircraft electronic and electro-mechanical systems used in the aerospace industry. Key Responsibilities Troubleshoot circuit boards and electronic assemblies to the component levelRead schematics and trace signals to identify root causes of failuresRepair, test, and overhaul aerospace electronic equipmentPerform advanced soldering and SMT reworkSupport engineering teams with te

Catalina Foothills, AZ • (21.8 miles) • Full Time • 9/22/2026

Join Our Team as a Maintenance Engineer!Ready to be the hero of our hotel? As a Maintenance Engineer, you’ll be the go-to fixer, keeping everything running smoothly and making sure our guests and team enjoy a safe, comfortable environment. You’ll get hands-on with everything from HVAC and plumbing to electrical and mechanical systemsthink of it as your backstage pass to the inner workings of the hotel! If you love solving problems, have an eye for detail, and enjoy staying active, this position is for you. Bring your technical know-how, a knack for teamwork, and a positive attitude to help us maintain a place everyone loves to stay and work in.EDUCATION & EXPERIENCEHigh School diploma or equivalent required.Experience in hotel maintenance or a related field preferred.A trade license (plumb

Tucson, AZ 85756 • (37.9 miles) • Full Time • 9/22/2026

Production Support Electrical EngineerA high-reliability electronics manufacturing team needs an experienced electrical engineer to keep complex hardware builds moving by rapidly diagnosing factory and supplier issues, defining corrective paths, and owning problems through closure.The strongest fit is a hands-on BSEE with 5-10 years of production, manufacturing, test, or sustaining engineering experience who can troubleshoot digital, analog, RF, or mixed-signal circuit card assemblies and communicate clearly across engineering, quality, operations, and suppliers.Location: Tucson, Arizona 85756Schedule: 1st shift, 7:00 a.m.-4:00 p.m.; 9/80A scheduleWork Setting: OnsiteRole Type: ContractContract Duration: Long-term renewable contract with ability to extend multiple years or convert to perma

Tucson, AZ 85705 • (26.3 miles) • Full Time • 9/21/2026

BACKGROUND: Since 1952, Beacon Group has been creating opportunities for people with disabilities across Southern Arizona, Phoenix and beyond. As a registered 501(c)(3) non-profit, Beacon serves over 2,000 people with disabilities each year. Beacon provides job training and placement, supported and center-based employment, and day treatment programs to assist nearly two-thirds of working-age people with disabilities who do not have a job. As a Beacon employee, you can be a part of delivering our mission and improving the lives of people with disabilities.POSITION INTRODUCTION: Beacon Group is seeking candidates to work on a federal contract. The ideal candidate is reliable, pays close attention to detail, is organized and must be able to pass a pre-employment background check. The position

Tucson, AZ 85719 • (26.8 miles) • Full Time • 10/1/2026

Angie's2574 N Campbell Ave, Tucson, AZ 85719Benefits:• $18.51/hr for Team Members; $21.51/hr for Shift Leads• Paid vacation time• Closed on seven major holidays• Health Insurance benefits• Growth potential with a start-up• Free shift mealAngie’s Food Concepts is on a mission to make “luxury” foods affordable! At Angie's Lobster, we are the first restaurant to bring Maine Lobster to the drive-thru with the same speed, price, and convenience as traditional fast food. With the recent launch of Angie’s Prime Grill, we are now bringing USDA Prime Steak and Organic Chicken, grilled-to-order, in Warm Bowls, Grilled Burritos, and Fresh-cut Salads to the drive-thru as well! We are changing the QSR game and making foods that were once only enjoyed by the few who can afford them or by others on speci

Tucson, AZ • (31.9 miles) • Full Time • 10/14/2026

Closing Date: Open Until FilledSALARY: $20.57 per hourQUALIFICATIONS:Applicants must have a high school diploma/equivalent. MUST possess a valid AZ driver's license, ability to pass a pre-employment physical, successfully complete training programs with post-training qualification period, successful completion of drug and alcohol testing, ability to write clear and concise reports and must be available to work weekends, holidays and evening hours.GENERAL DESCRIPTION:This is a single-level classification. Streetcar Operators operate light rail vehicles safely and in accordance with a designated schedule and observe all laws, regulations and procedures. The responsibilities include performing the safe on-time operation of the Sun Link Streetcar and providing professional customer service in

Tucson, AZ • (31.9 miles) • Full Time • 9/23/2026

Manufacturing Operator – OvernightLocation: Tucson, AZEmployment Type: Full-Time, 1-Year W-2 ContractShift: 3rd Shift / OvernightPay Rate: $18.61-$20.61/hourContract Length: 1 yearC2C: Not availableBenefits: Medical, dental, vision, and paid life insuranceRole OverviewBEPC is seeking a Manufacturing Operator – Overnight to support our client's manufacturing operations on the 3rd shift. This is an excellent opportunity for candidates with previous manufacturing, production, or assembly experience who are comfortable working overnight hours.The Manufacturing Operator will assemble, formulate, fill, label, and package products while following established specifications, quality standards, and safety procedures.Selected candidates will work in one of the following manufacturing areas:Large Bot

Tucson, AZ • (31.9 miles) • Full Time • 10/15/2026

Qualifications:Basic QualificationsHigh school diploma or GEDThree years of experience in either of the following: Operating water/wastewater treatment plants, Utility mechanic, stationary engineer, refrigeration mechanicThe ability to demonstrate advanced skills in the field of plant operations.Independent decision-making and judgement in the performance of all duties.Effective verbal and written communication skills.Possess a valid driver's licensePreferred Qualifications3-5 years of previous Utility Plant experience with familiarity of the principles and practices of Utility Plant operations; operating principles of chillers, compressors, cooling towers, building management systems, water distribution systems, emergency generators and fire pumps, water treatment programs; valves, pumps,

Tucson, AZ 85714 • (31.8 miles) • Full Time • 10/15/2026

WHO IS INDUSTRIAL METAL SUPPLY? IMS is the only metal distributor that can service manufacturers, fabricators, and job shops to contractors, maintenance departments, and hobbyists all within hours. For the past 77 years, we have been constantly finding ways to save time and money for all our clients. IMS provides custom cut metals for multiple industries including Aerospace; Energy; Semiconductor; Transportation; Construction; Medical Device, and Mining. Our inventory is massive, quality standards unmatched, and our turn-around time is in a league of its own. JOB SUMMARY The Machine Saw Operator willsafely operate forklifts, side loaders and other industrial equipment to move raw metal materials from inventory to metal-cutting cells. This is a great opportunity for someone with material ha

Tucson, AZ 85750 • (21.6 miles) • Full Time • 10/10/2026

Recognized as an AZ Central Top Workplace, Loews Ventana Canyon Resort offers careers at a luxury resort in Tucson's Catalina Foothills. Team members create memorable stays for guests seeking relaxation and adventure across 398 guest rooms, five dining outlets, spa, recreation, and event spaces.Who We Are: Founded in 1960, Loews Hotels & Co operates iconic hotels and resorts across the U.S. Together, our diverse and welcoming teams craft exceptional experiences in iconic destinations.Growth and belonging start here; you'll be valued for who you are and the goals you have. Whether your next career chapter involves making memories for guests or supporting our properties in our Corporate Office, every role-from Guest Services to Finance, Culinary to IT-offers opportunities to grow and make a

Tucson, AZ 85718 • (22 miles) • Full Time • 10/6/2026

OverviewAt Firebirds, every role plays an important part in creating extraordinary guest experiences. As a Dish Machine Operator, you are a key part of our Back of House teamensuring cleanliness, safety, and organization so the kitchen can operate at its highest level.Your work supports every plate that leaves the kitchen and every guest experience we deliver.What you can expect from us:Our team members are the most important stakeholder here at Firebirds Wood Fired Grill and such an important part of our brand. We ensure that our team members receive extensive training and development, are continuously set up for success, and feel welcomed in our Firebirds family! Never worked in a restaurant before but have a passion for learning more? It will be our pleasure to start you in a role where

Tucson, AZ • (31.9 miles) • Full Time • 10/15/2026

About AndrewsWe have been fixing, building, and showing up for Arizona businesses for over 30 years. Refrigeration, HVAC, plumbing, electrical, concrete, construction - if it keeps a business running, we handle it.We are tradespeople who take pride in doing the job right the first time, every time. Our customers are our neighbors and our community and the people who do that work are the backbone of everything we do here.We invest in our people the same way we invest in our work – with integrity. Weekly training, real advancement opportunities, and a clear path to becoming the kind of tradesperson the industry looks to. We are not just building a company. We are building careers.If you want steady work, a team that has your back, and a company that is actually going somewhere - you are in t

Tucson, AZ 85757 • (38.6 miles) • Full Time • 10/2/2026

General Labor - Draft Line Technician Position SummaryWe are a leading beverage system installation and service company in the TUCSON area seeking a service-driven Draft Line Technician to support our on-premise customers. This role is responsible for draught system service, installation, maintenance, and customer support, while ensuring high-quality performance and customer satisfaction. The position may also assist with special event setup and execution.This is a hands-on, customer-facing role ideal for individuals who enjoy working independently, solving problems, and delivering excellent service in a fast-paced environment.Key ResponsibilitiesProvide responsive, professional service to on-premise accounts and communicate effectively with customer staffInstall, clean, maintain, and trou