FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

$5,000 Sign On Bonus! Shift: Weekends (3 12's Fri-Sun 6a-6:30p) A&P Lead (Crew Chief) Build an Aviation Career You’re Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well. What you'll do: Lead and supervise a maintenance crew of 3-6 technicians through all levels ofGulfstream scheduled and unscheduled maintenance to include: 12/24/36/72 monthinspections, 5000 landing inspections, engine changes and discrepancy troubleshooting. At times will work multiple aircraft.Manage labor hours, materials and crew members efficiently. Responsible for the ontime completion of their work orders while maintaining attention to detail, excellentcustomer service and quality workmanship.Working with the Shop Foreman, keeps customers up to date on the status of theiraircraft. As time permits, learns on the job the duties and responsibilities of the ShopForeman.Working with Human Resources, participates in the interviewing and selection of theirstaff. Writes and delivers effective employee performance evaluations and conductscounseling sessions with crew members as needed.Responsible for the on-going development and training of their staff.Other duties as assigned Requirements: Minimum 5 years Gulfstream maintenance experience any model GII through G550performing scheduled and unscheduled maintenance to include: 12/24/36/72 monthinspections, able to perform engine run up.Airframe and Power plant License Required, high school diploma or equivalent required.Must qualify as an Inspector.1 year of supervisory experience required. Preferred Characteristics: Basic knowledge of operating a personal computer or laptop.Knowledge of job-specific machines and tools, including their designs, uses, repair, andmaintenance.Capable of repairing machines or systems using the needed toolsAbility to determine the kind of tools and equipment needed to do a jobAble to perform routine maintenance on equipment and determine when and what kind ofmaintenance is needed.Capable of determining causes of operating errors and deciding what to do about it.Able to perform tests and inspections of products, services or processes to evaluate quality orperformance.Able to install equipment, machines, wiring, or programs to meet specificationsAbility to control operations of equipment or systemsAbility to use logic and reasoning to identify the strengths and weaknesses of alternativesolutions, conclusions or approaches to problems.Able to monitor gauges, dials or other indicators to make sure a machine is workingproperly. Benefits that make life better: Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunities Salary: $50-63 per hour based on experience Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us. Inclusivity Is Our Standard It is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

CAD Drafter | Royal Truck Body | Carson, CARegular Employee |Hourly Non-Exempt What you’ll do:Shape the future of truck body design and manufacturing ss the CAD Drafter forRoyal Truck Body(A Shyft Group Brand) based at our manufacturing facility inCarson, CA, You will create accurate 3D models and engineering drawings using SolidWorks, contributing directly to our product development process.Core Responsibilities:Generate detailed 3D models, assemblies, and 2D engineering drawings in SolidWorks based on project requirements and engineering direction.Develop and maintain Bill of Materials (BOMs) for design projects and manage CAD drawing organization within the PDM system.Collaborate cross-functionally with engineering, manufacturing, purchasing, and sales teams to support project needs.Create technical drawings and visual aids to support manufacturing processes and sales efforts.Participate in design reviews and contribute to design improvements and problem-solving.Learn more aboutThe Shyft GroupandRoyal Truck Body by exploring theLearn Moresection below.What you need to be successful:·Proven experience as a CAD Designer, Drafter, or in a related role. ·Expert proficiency in SolidWorks and AutoCAD design software. ·Strong understanding of geometric dimensioning and tolerancing (GD&T) principles (ANSI-Y14.5). ·Proficient in Microsoft Office 365 applications (Excel, Word). ·Demonstrated ability to meet deadlines and work effectively in a fast-paced environment.Learn MoreThe content below is exclusively available on our career site job description:https://theshyftgroup.csod.com/ux/ats/careersite/4/home/requisition/953 c=theshyftgroupThe Shyft GroupThe Shyft Group to merge with Aebi SchmidtEmployee TestimonialsOur StorySustainabilityYouTubeLinkedInJoin Our Talent CommunityRoyal Truck BodyAboutPress ReleasesTruck Bodies Product PageAccessories Product PageFollow Royal Truck Body onLinkedIn,Facebook,Instagram, andYouTubeWhy The Shyft Group Our people are our greatest asset, and your success is our success! That’s why we provide comprehensive benefits that support your health, financial security, and work-life balanceso you can thrive both personally and professionally.Health & Wellness:Medical, Dental, Vision, HSA/FSA, Wellness PlanFinancial Security:401(k) with match, Disability, Life InsuranceWork/Life & Growth:Educational Reimbursement, EAP, Dependent Care.At The Shyft Group, we don’t just offer benefitswe invest in your well-being. Join us and experience the difference!Who we are:The Shyft Group is the North American leader in specialty vehicles, including last-mile delivery vans, work trucks, and motorhome chassis. Our 10 brands Utilimaster®, Blue Arc, Royal® Truck Body, DuraMag®, Magnum®, Strobes-R-Us®, Spartan® RV Chassis, Red Diamond, Builtmore and Independent Truck Upfittersare powered by 3,000+ team members across the U.S. and Canada.Backed by 50 years of innovation and a supportive, entrepreneurial culture, we’re leading the way in electrification and proudly ranked among Fortune’s 100 Fastest Growing Companies.Equal Employment Opportunity (EEO)The Shyft Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, genetic information, status as a protected veteran or status as a qualified Individual with a Disability, or any other characteristic protected by applicable federal, state or local law.If you have a disability and would like to request an accommodation in order to apply, please email us at . The Shyft Group is an E-Verify EmployerShyft uses E-Verify, which is an online system operated by the U.S. Department of Homeland Security in partnership with the Social Security Administration to verify employment eligibility and validate social security numbers. Through participation in the E-Verify program, information entered on Form I-9 will be provided and compared to information available at both of these agencies. See posters for more details. E-Verify Notice U.S. Right to Work Notice.

We are looking for a Maintenance Manager with a passion to operational goals. If this is you and you’re ready for your next destination then you have cruised to the right spot! Wage: $77,000 annuallyApply today and shift your career into drive for tomorrow!Qualifications:2+ years in a management or supervisory role overseeing the repair and maintenance of the vehicles within a multiple location organization.Must have a valid driver’s license and clean driving record.Must be able to work flexible shifts including weekends, holidays, and overtime as required.Must be computer literate with strong keyboarding skills.Knowledgeable in rental car procedures and location operations.Complex problem-solving skills: proven ability to solve problems independently.Must have excellent multi-tasking and verbal/written communication skills.Ability to manage, develop and motivate staff. Requirements: Provide administrative support to all maintenance functions.Responsible for communicating daily tasks for the department.Coordinate schedules for service maintenance on all vehicles within the Pool as needed.Maintain, monitor and order supplies as needed.To manage all functions needed in order to oversee the repair and maintenance of the vehicles within the various locations. Benefits and Perks: Not only do you get to be part of an organization where you Drive your Potential, Power your Passion!! Below are a few perks and discounts: Up to 40% off any standard Hertz Rental Medical, Dental & Vision plan optionsRetirement programs, including 401(k) employer matchingPaid Parental Leave & Adoption AssistanceEmployee Assistance Program for employees & familyEducational Reimbursement & DiscountsVoluntary Insurance Programs - Pet, Legal/Identity Theft, Critical IllnessPerks & Discounts –Theme Park Tickets, Gym Discounts & moreThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay range: $95k - $120k annually Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Project/BusinessResponsibilities:Manages the Service P/L for assigned branch(s).Forecasts staffingrequirements.Effectively prioritizes customer calls and advises dispatch accordingly.Ensures customer requirements are followed, and calls are completed on a timely basis.Ensures customer rules are accurately adhered to and approves work orders.Reviews dashboards and financial reports and takes appropriate action.Oversees the procurement of parts and supplies.Maintains communication with customers and ensures their expectations are met.Resolves issues or problems that impact customer satisfaction.Manages and maintains fleet, parts and materials inventory, and resolves discrepancies or problems in a timely manner.Develops and maintainslong term relationships with customers and subcontractors.People Responsibilities:Communicates company direction, sets expectations and holds team accountable for results.Provides leaderships, builds a collaborative team and rewards accomplishments of the team.Interviews, selects, hires, and oversees onboarding of supervisors, team leads and technicians.Ensures technicians are scheduled and dispatched efficiently, based on skill level, location, and call volume.Manages performance and provides training, coaching and performance feedback to Supervisors, Team Leads and Technicians.Uses metrics to drive accountability and performance.Ensures compliance of Service policies and procedures, including eSo, refrigerant tracking, time and attendance, etc.Ensures use of PPE and the application of safe behavior, including driving, by all employees.Ensures customer service and quality of work meets customer requirements and Source standards. Qualifications: Project/Business Management:High school diploma, GED, or completion of trade program or technical school. College degree is a plus.10 + years of experience in the refrigeration/HVAC service, commercial construction, or a related industry.Knowledge of commercial refrigeration and HVAC principles and practices, including service hour estimation, labor forecasting, and multiple disciplines involved in area of responsibility.Proficiency in understanding and managing P&L.Demonstrated business acumenProficiency in managing multiple assignments, setting and balancing competing priorities with strong organizational skills and ability to multi task.Ability to solve problems and apply good judgement.Excellent verbal/nonverbal and written communication and presentation skills.Strong customer service skills, including an ability to proactively address customer issues and concerns and ability to forge strong working relationships with customers.Knowledge of jobsite safety, ability to oversee work activities to ensure safe work practices and safety rule compliance.Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools including E-Mail, Word, Excel, Work Order/Dispatch Software, Enterprise Resource Planning (ERP) software, etc.Good driving record.People Management:5 + years of people management experience.Strong leadership skills, with demonstrated experience managing a diverse and multi-discipline workforce.Proficient in coaching, training, developing and building a team.Proficient in managing time, delegating assignments and following through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, mgr, lead, supervisor, leader, regional, HVACR, supermarket, rack systems

JOB DESCRIPTIONPersons employed as a GSE Mechanic is expected to:Inspect and maintain ground support equipment used in operations.Troubleshoot, repair and/or overhaul ground support equipment.Check and service ground support equipment with fuel, water, oil and hydraulic fluid.Diagnose problems using test equipment and applicable manuals.Build and assemble machines or mechanical components according to requirements.Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues.Conduct repairs aiming for maximum reliability.Perform thorough maintenance on machinery, equipment and systems.Clean and apply lubricants to machinery components.Replenish fluids and components of engines and machinery.Provide consultation on correct maintenance and preventative measures to machine or vehicle users.Keep logs of work and report on issuesCompletion of GSE paperwork as required.Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert).RESPONSIBILITIESThe following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines).Frequently lift and/or move up to 75 pounds.Read, write and fluently speak and understand the English language.Ability to read and comprehend instructions, short correspondence and memos.Write routine business correspondence.Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees.Deal with problems involving several concrete variables in standardized situations.Apply common sense understanding to carry out detailed but uninvolved written or oral instructions.Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals.Excellent knowledge of machinery and hydraulic, electrical and other systems and their componentsAptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers)Ability to follow established procedures and practices and read instruction, blueprints etc.A strong commitment to all health and safety guidelinesVery good communication skillsA problem-solving abilityVery good physical strength and staminaQUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experienceMinimum of 18 years of ageAbility to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies.Must be legally authorized to work in the country of employment.Prior GSE or heavy equipment experience preferred.Must have your own tools.Must possess valid driver’s license.Certification from a vocational school or completion of apprenticeship is a definite plus.Valid certification (ASE) preferred.Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, and travel. The pay range for this position is $28.00 to $35.00/ hour.Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Estimator’s primary responsibility and accountability is to provide an exceptional and successful customer experience whilecreating estimates, coordinating repair needs for customers including all communication, informing and updating customers andinsurance companies throughout the repair process. The Estimator accurately assesses the damage of vehicles and documentsneeded repairs and parts replacement on the damage appraisal. The Estimator plays a pivotal role in the success of the customer’sexperience by ensuring they are working in alignment with all team members in achieving the repair facility's KPIs. Key Job Responsibilities Role and RequirementsEnsure every customer interactionis documented, updated efficiently and accurately with pertinent detailsProvide Customer with accurate and timely information, guiding them through the repair process and ensuring that theyreceive excellent customer serviceEnsure compliance with all insurance client requirements, processes and metricsEnsure compliance with all WOW Operating Way’s regarding customer drop-offs, repair planning, customer communication,and deliveryCommunicate all customer requests and needs to appropriate team membersProvides positive energy when greeting customers in person and on the phoneUnderstanding of all required Insurance programs and proceduresParticipate in daily “production walks” with the Management Team, as requiredSupport all team members when requiredParticipate in monthly Health & Safety and staff meeting (if required)Attend training, information sessions and workshops recommended by Store ManagerMaintain the store's KPI’s by maximizing role performanceUphold the company's Core Values : Honesty, Integrity & RespectEducation and/or Experience Required Knowledge of Repairs and OE GuidelinesHigh School Diploma or equivalentAwareness of where to look for answersBasic Computer SkillsCompliance for DRP’s Minimum of 1-year experienceMust be willing to complete I-CAR TrainingValid Driver’s License Required Skills/Abilities Awareness of where to look for answersBasic Computer SkillsCompliance for DRP’s Minimum of 1-year experienceMust be willing to complete I-CAR TrainingValid Driver’s LicenseBenefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Up to 80 hours of Paid Time Off Annually2 weeks of paid parental leave for Full Time employees who work a minimum of 30 hour per week6 paid holidays annuallyMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsuranceAdditional Voluntary Life InsuranceContinuing Education OpportunitiesFree prescription or non prescription safety glasses each yearAnnual Voluntary Uniform StipendPlease note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Annual Paid Time Off (PTO) plans2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week6 paid holidays annuallyMedical, Prescription Drug, Dental & Vision Insurance effective Day 1401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsuranceAdditional Voluntary Life InsuranceContinuing Education OpportunitiesFree Prescription or Non-Prescription Safety Glasses annuallyAnnual Voluntary Uniform StipendGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.Compensation Details:HOURLY$25 - $38 / HourCompensation is commensurate with skill, education and experience.

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $20.00 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#GN0042#

CNC Set-Up Lathe Machinist – 2nd shift Mon-Fri 3:30pm-12:00amPay Range $28-30+ plus 12% shift differentialIncentive BonusHiring ImmediatelyMake Your Mark. Shape Your Future.It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of 54,000+ professionals in 60 countries who are making their mark on some of the world’s most beloved brands, including DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more.What You’ll DoAs a CNC Set-Up Lathe Machinist, you’ll be part of our team located in Fullerton, CA. You’ll get to: Manufacture products in accordance with engineering drawingsCheck product dimensions utilizing proper equipmentRecord, as required, all productivity on company systemClean and maintain machinery according to department and company standards.Who You Are You always strive to do a good jobbut wouldn’t it be great if you could do your job and do a world of good You care about quality – at every level. You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. In fact, you embrace it. You also have:5+ years of set-up experience with CNC Lathe (Twin, Takisawa, Okuma or Doosan)Ability to set-up a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC controls.Experience with utilizing a pre-setter off line for tool offsetsExperience with quick change toolingExperience with macro programming and Mastercam or other major programming softwareKnowledge of basic measuring tools, calipers, micrometers, comparators and math requiredSolid understanding of GD&T with ability to read and interpret drawing requirementsMust be able to lift 30 lbs.What You’ll Receive You’ll receive a competitive wage and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking an Assistant Fleet Maintenance Manager toassist theFleetMaintenance Managerwithmanagement ofthe day-to-day maintenance aspects of the operation of CNG and propane vehicles. The Assistant FleetMaintenanceManager’s responsibilities will include, but not be limited to, assisting theFleetMaintenance Manager with the oversight of maintenance personnel, the organization of the maintenance yard and various administrative duties. The Assistant FleetMaintenanceManager shall be responsible for supervising the maintenance operation during shifts when the Fleet Maintenance Manager is not at the shop. Qualifications: Talent Requirements:Must be CDL licensed.Strong supervisory experience; must be able to supervise 30+ personnel.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must have the ability to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft Outlook.Must have technical competence with light/medium/Heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.Must have a minimum of three (3) years fleet/vehicle maintenance supervision experience.ASE Certified fortruck/transit preferred.Diesel experience required.Starting salary range: $90,000 - $103,000MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC/Targeting operator to join our team! This is a 2nd shift position at our plant in Cudahy, CA. CNC operator will set up and run the 5-axis CNC machining, operating computer numerical control equipment to machine castings. Loads parts, cycles machine and monitors machine operations such as worn or damaged cutting tools. Run production lots and communicates with co-workers regarding productions runs, and maintains safe, organized and clean work environment. ESSENTIAL JOB FUNCTIONS/DUTIES Perform typical machine shop operations.Detect and report defective materials or questionable conditions to management or designee.Perform inspection of machined products (including documentation of results).Read, understand, and interpret instructions and procedures including engineering blueprints accurately.Complete and maintain paperwork for parts.Experience in micrometers, inside micrometers, calipers, and other tool shop an inspections equipment.Acquire additional certifications and credentials as required for work or career developmentMaintain a clean, organized work areaComply with all safety, DOT, HAZMAT and environmental policies and proceduresAbility to work overtimeAttendanceWork on/participate in special projects as needed or assigned by Management Pay range: $19.00-$24.00+ 2nd shift differential QUALIFICATIONS Education: High school diploma or equivalent required, 2 year CNC Technical Degree/certificate preferredExperience: 2 years minimum CNC machining, setup, operating & inspecting. Requires an extensive knowledge of techniques, and basic foundry practices in addition to acquired additional specific knowledge in the targeting area usually acquired through two to three years of targeting experience.Certifications/Licenses: N/AOther preferred Knowledge, Skills & Abilities: N/A WORKING CONDITIONS Working Environment: Indoor working environment within various areas of a foundry facilityRequired PPE: PEE varies throughout the plant, check with area Supervisor to ensure proper PPE is being used Safety Glasses: Needed in all areas of the plantSteel toe shoes: Needed in all areas of the plant This is a non-management positionThis is a full time position

We Put the World on VacationTravel + Leisure Co. is the world’s leading vacation ownership and travel membership company, with a dynamic and growing portfolio of resort, travel club, and lifestyle travel brands. Our dedicated associates help the company achieve its mission to put the world on vacation. Innovation and growth keep our work interesting and fun. Every day is a chance to learn something new and turn vacation inspiration into exceptional experiences for millions of travelers worldwide.How You’ll Shine:As a Maintenance Tech I, you’ll make dream vacations by providing quality results for our guests by using your maintenance skills, customer service expertise and guaranteeing each unit and building is in perfectly working order.How You'll Make an Impact:Perform all general facility maintenance under supervision in a manner which ensures the preservation of optimum quality and efficient production. Perform service requests and repairs as directed (Painting, appliance repair, minor electrical, carpentry).Perform maintenance work for make-ready units as directed.Apply basic knowledge of repair and replacement of general fixtures, general repair includes: doors, windows, walls, flooring, ceilings, roofs, furniture, and cabinetry.Clean and maintain outside landscape: including emptying trash, pick up of trash, general landscape work.Clean and inspect in building systems and report deficiencies to supervisor. Adhere to the company’s safety programs.What You’ll Bring:A professional appearance and positive, can-do attitude with team focus.Ability to work independently or with others as needed.Basic handyman skills.How You'll Be Rewarded:We offer a diverse range of comprehensive health and welfare benefits to associates who work 30 or more hours per week to meet your needs and support you throughout your career with us. Travel + Leisure Co. benefits include: Note: Temporary and/or seasonal associates are ineligible for Paid Time Off.• Medical• Dental• Vision• Flexible spending accounts• Life and accident coverage• Disability• Depending on position, paid time off, parental leave and holidays (speak to your recruiter for additional information)• Wish day paid time to volunteer at an approved organization of your choice• 401k with employer match (subject to eligibility requirements, including tenure - speak to your recruiter for additional information)• Legal and identity theft plan• Voluntary income protection benefits• Wellness program (subject to provider availability)• Employee Assistance ProgramCompensationThe hourly rate for this role is $19.25.Where Memories Start with YouHospitality is at the heart of all we do at Travel + Leisure Co. Here, you’ll find an inclusive environment where we deliver excellence and take time to have fun, celebrate together, and support one another. We're always looking ahead to what’s next and how we can strengthen our business, its neighboring communities, and the customer experience. Join our global team and build a career where memories start with you.We are an equal opportunity employer, and all applications will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to , including the title and location of the position for which you are applying.

$33.00/hourShift Premium may ApplyImmediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You’ll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You’ll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We’re Looking For:Valid Driver’s License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting.The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. Los AngelesCaliforniaUnited States of America

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $16.50 per hourGrowth opportunities abound – We promote from withinNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skillsHave the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

ESSENTIAL DUTIES AND RESPONSIBILITIES:Perform necessary repairs and maintenance to warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, etc.) to insure that adequate machinery is available for day and night warehouse operations.Review any equipment reports submitted by warehouse associates, record actions/repairs taken, and maintains a repair log per USF policy.Perform PM’s (Preventative Maintenance) on equipment, and maintain PM log with proper documentation, per USF policy.Comply with all USF and government guidelines regarding safety when working on equipment (i.e. Lock Out/Tag Out, placarding and required documentation, safe work environment, etc.)Maintain and secure the battery-charging area, batteries and other equipment contained therein.Responsible for company tools and maintenance equipment used in performance of job duties, including inventory maintenance, safe operation, proper storage, and security of tool area.If authorized, may purchase tools and other equipment needs from local vendors to perform required duties.Performs light maintenance duties as assigned (i.e., replacement of light bulbs, painting, storage rack repairs, light plumbing, equipment repairs, basic drywall and concrete repairs, etc.)SUPERVISIONRELATIONSHIPSInternal: Warehouse personnel and supervisory staff, Operations support, Maintenance and Sanitation personnelExternal: Outside vendorsQUALIFICATIONSEducation/Training: High School education or equivalent preferred; additional mechanic training or trade school degree preferred.Related Experience: A minimum of six months previous mechanic experience required.Knowledge/Skills/Abilities: Knowledge of equipment repair and operation; able to repair and overhaul warehouse equipment; welding ability; able to read and write legibly; able to follow orders; basic mathematical skills (add, subtract, multiply, divide); able to work with little direct supervisionPhysical Requirements:JOB REQUIRES WORKER TO:1. SIT Occasionally2. STAND Frequently3. WALK Frequently4. DRIVE Occasionally (Test drives equipment)JOB REQUIRES WORKER TO LIFT:1. 1-10 lbs (Sedentary) Continuously2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO CARRY:1. 1-10 lbs (Sedentary) Frequently2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO:1. Push/pull Occasionallye.g.: Boxes, pallet jack control arm, hand tools, drive units2. Climb/balance Occasionallye.g.: equipment Pallet Jack, fork lift, order selector3. Stoop/squat Frequently4. Kneel/bend Occasionally5. Bend Frequently6. Reach above shoulder Occasionally7. Grasp objects Frequently8. Manipulate objects Frequently9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $30.00 and $35.00This role will also receive overtime compensationBenefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

Description Position at Thompson Pipe Group - Los Angeles Construction Foreman Starting $95,000.00/Annually Who We Are: Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From our humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous one. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure, and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com. Thompson Pipe Group is now looking for a Construction Foreman who will provide direct supervision and leadership to the department staff in order to maintain a safe work environment while producing high-quality products in an efficient manner. DUTIES AND RESPONSIBILITIES: Actively participate in training, reviewing performance & development personnel. Ensure daily preventative maintenance is completed and documented.Work with Maintenance Department as needed for maintenance and repair of equipment.Maintain a culture of collaboration and engagement.Able to work under pressure and with different departmentsTrack inventories and develop production plans. Production and department resource troubleshooting /problem-solving.Ability to multi-task & perform other duties as assignedAbility to give & receive constructive feedback.Ability to write standard operation procedures, (SOP’s)Manage daily + weekly planning schedules Tracks absenteeism and timekeepingManage head count in assigned department SPECIFIC: Monitor safety practices of Department staff. Provide guidance and training on work-related safety issues/topics in compliance with appropriate safety practices and procedures and with applicable Federal, State, and local codes, regulations, and requirements. Enforce Company safety policies and standards. Review and prepare the weekly Department schedules to meet production requirements for the Department. Assign Department staff appropriately to accomplish the production requirements.Conduct daily Department toolbox meetings. Review safety information of work-related topics.Support and maintain the 5-S work area(s). Monitor housekeeping requirements EDUCATION / KNOWLEDGE: High school diploma or G.E.D. required.Minimum of two (2) years’ supervisory experience in a manufacturing environment, preferably concrete reinforced pipe.Proficiency in working with trade tools, equipment, materials, methods, and techniques used in skilled and general production, maintenance, and equipment repair, maintaining equipment in a safe, clean, and orderly condition.Basic record-keeping and scheduling techniques.Appropriate health and safety precautions and procedures LICENSES AND OTHER REQUIREMENTS: Valid driver's license in the work location StateValid forklift operator certification. Ability to trainMaintain & track records of certifications PHYSICAL DEMANDS: Work is performed while standing, sitting, and/or walking.Ability to communicate effectively using speech, vision, and hearing.Requires the use of hands for simple grasping and fine manipulations. Requires bending, squatting, crawling, climbing, reaching.Requires the ability to lift, carry, push, or pull medium weights, up to 50 pounds.Activities involving being around moving machinery, exposure to changes in temperature, exposure to dust and fumes, and high noise levels.Ability to assist with daily operations based on department needs Work Environment The work environment is not climate controlled and is subject to outdoor weather conditions. Team members are exposed to sounds and noise levels that are distracting Work Hours Monday-Friday Occasionally Saturdays (Holidays are off) 10 to 12 hour shifts Must pass Pre-employment Physical and Drug test. Not A Warehouse Job. Precast Concrete Pipes is what we do. What We Offer Medical, Vision and Dental, Life BenefitsLife & Supplement LifeCompany Matched 401K retirement planVacation & Sick Leave Training and DevelopmentCareer Opportunity!$1,000.00 Referral Bonus Apply Now! We are located at 3009 N Laurel Avenue Rialto, CA 92377 Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions upon request. Thompson pipe group is an Equal Employment Opportunity (EEO) employer that welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or another legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace. EOE/AA – M/F/Vet/Disability EOE/AA – M/F/Vet/Disability Thompson Pipe Group – is an Equal Opportunity Employer Drug-free workplace.

DescriptionFind your future at United! We’re reinventing what our industry looks like, and what an airline can be – from the planes we fly to the people who fly them. When you join us, you’re joining a global team of 100,000+ connected by a shared passion with a wide spectrum of experience and skills to lead the way forward. Achieving our ambitions starts with supporting yours. Evolve your career and find your next opportunity. Get the care you need with industry-leading health plans and best-in-class programs to support your emotional, physical, and financial wellness. Expand your horizons with travel across the world’s biggest route network. Connect outside your team through employee-led Business Resource Groups. Create what’s next with us. Let’s define tomorrow together.We have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape.Salary and benefits information is being included in this job posting in accordance with California state law.Starting hourly rate is $32.65, subject to a collective bargaining agreement.Bonus eligible: YesKey Responsibilities:Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipmentRequires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervisionJourneyman electrical license a plusRequires the ability to make low and high voltage repairs to all building electrical equipmentThis includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devicesYou should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyorsFacilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditionsSchedules are bid and awarded according to seniorityFacilities Technicians are represented by the International Brotherhood of Teamsters (IBT)Salary increases will be administered according to the current IBT/United contractNew employees are required to join the union within ninety (90) days of employmentThere is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local LodgeQualificationsWhat’s needed to succeed (Minimum Qualifications):Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's licenseUnited will consider applicants with criminal histories consistent with the Fair Chance OrdinanceThe starting rate for this role is $32.65.This is also a bonus eligible position (i.e. profit sharing).We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement).United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Overview: TUSTIN LEXUS is part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Quality Automotive Service Technicians/Mechanics, to work with our Quality Dealership, representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees.The salary range for this position is between $33/hr - $48/hr.We offer:A Great Working Environment with the Latest EquipmentStructured, Self-paced and Paid Training Opportunities Leading to Manufacturerand Group 1 RecognitionHealth, Dental & Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards Program You needAutomotive Technician/Mechanic ExperienceA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*IND1Group 1 Automotive is an Equal Employment Opportunity employer.

5331 Paseo Del Norte, Carlsbad, CA 92008Automotive Technician, Mechanic Required: Auto Repair Experience$300 - $2,000 Signing Bonus! Unlimited Income!!$30 to $40/hour Flat RateWe Guarantee Your Hours for 90 Days!Productivity Bonuses! Excellent Benefits!Premier KIA of Carlsbad, CA is family-owned and a GREAT place to have a Rewarding Career! Our High-Volume Service Department is seeking EXPERIENCED Automotive Technicians to perform vehicle repairs and maintenance. Auto Repair Tech experience is REQUIRED from any brand. KIA and Dealership experience is preferred. Earn an UNLIMITED INCOME with OVER 100% PRODUCTIVITY! Apply now for this great opportunity to join our team!We are part of the super successful and family ownedPremier Auto Dealer Group! We appreciate our employees, invest in their success, and give back to our community with our “Giving Hope Foundation”.We Provide Excellent Benefits:$300 - $2,000 Signing Bonus Based on Experience and Certifications!$30 to $40/hour Flat RateEarn Unlimited Income with Over 100% Productivity!We guarantee your hours for 90 days!We Will BEAT Your Current Pay! Bring your pay stub to the interview.Productivity Bonuses!Medical, Dental and Vision Insurance401(k) with Company Match!Paid time offInstant vacation after 6 months!Premium, ongoing professional developmentGreat work environmentEmployee programs for referral bonus and auto purchasesPaid participation in Giving Hope Community Service days givinghopenola.orgFind more information on our benefits and career paths at WhyPremierAutomotive.comResponsibilities - Experienced Automotive Technician:Perform vehicle inspections, diagnostics, repairs, maintenance, recall work, and installations according to experience and certificationsAutomotive service includes engine, transmission, electrical, steering, suspension, brakes, heating, A/C, exhaust system, and more, that meets dealership and manufacturer standardsKeep shop area neat/clean and account for toolsOther duties may be assigned according to expertise and certificationsRequirements - Experienced Automotive Technician:REQUIRED: Automotive Repair Technician experienceKIA & Dealership Tech, Mechanic experience is preferredCertified Technicians preferredValid driver's license and acceptable driving recordExperience with the latest automotive technologies and working knowledge of shop equipmentReliable with a good work ethic and a positive attitudeA positive attitude and works well as part of a teamWe are an Equal Opportunity Employer

Expand your career possibilities.Thank you for dedicating your time and talent to Lowe’s. We want to give you more opportunities to learn and grow, so if you find a position you’re interested in below, we encourage you to apply!Find Your Home to More Possibilities.Your Impact at Lowe'sAs a maintenance Mechanic I, you play an important role in keeping our distribution center running smoothly. By quickly and independently fixing equipment issues in different areas, you'll help maintain a seamless flow of goods and keep our supply chain running.Your adaptable skills, combined with the ability to guide others, directly contribute to the overall efficiency of our distribution center teams. Your impact is not just about repairs – it's about creating a safe and productive environment for your fellow team members.How We Support YouAs an industry leader, we invest in the people and technology needed to grow and win as a team.Safety: Our commitment to safety is a key factor that attracts skilled mechanics to our team. We encourage our mechanics to take their time with their work, prioritize their physical health and safety, and take pride in keeping our facilities clean, well-maintained, and adhering to safety regulations.Culture of Belonging: Our teams enjoy a positive work environment where leaders support and respect you, and associates genuinely appreciate each other.Financial Future: We invest in you – own part of the company with our optional Employee Stock Purchase Plan, or participate in our matching 401k plan.Bonus Potential: When we win, you win. We award front line workers discretionary and profit-sharing bonuses when we succeed.Health and Wellbeing: We offer paid time off for vacations, holidays and sick time, as well as access to top-tier medical, dental and vision insurance.For information about our benefit programs and eligibility, please visit .Your Day at Lowe'sAs a maintenance Mechanic I, you'll use your specialized expertise in conveyors, rolling stock, or building components to handle complex repairs in your area of focus. Armed with sufficient electrical and mechanical knowledge, you will independently diagnose, prioritize, plan, and execute repairs. You will also be expected to collaborate with colleagues in management or leadership when needed.Key ResponsibilitiesWork in a distribution/warehouse environment, handling physical and environmental aspects typical to such settings.Utilize tools for maintenance tasks requiring fine motor skills and hand-eye coordination.Perform specialized repairs in conveyors, rolling stock, or building components within the Regional Distribution Center (RDC).Demonstrate electrical and mechanical ability for safe, independent equipment repairs in the Regional Distribution Center (RDC).Use trade skills, classroom knowledge, and systems experience to diagnose equipment issues and make necessary repairs.Obtain or order the proper parts necessary for equipment repairsMaintain accurate and detailed records of repairs, replacements, and maintenance activities.Adhere to safety protocols and ensure a safe working environment for oneself and others.Stay updated on new technologies, equipment, and maintenance procedures through ongoing training and education.Minimum QualificationsPossess a valid state driver's license2 years of experience in your specialty areaCombination of experience and/or technical training in electrical/electronic theory ranging up to 600 volts systems (or willingness to obtain proper training within 1 year of employment)Minimally must be able to lift 25 pounds; up to 70 pounds.Must be able to work safely with corrosive materials and at heights of 20+ feet.If required by local regulations, certified to perform work at the Maintenance Mechanic level (such as electrical work in the state of Oregon)Proven record of following safety requirementsPreferred QualificationsAble to see objects and discriminate colorExperience and/or certification with welding and fabricationExperience operating various maintenance and operations vehicles and equipmentExperience reading blueprints, schematics, and other technical drawingsSchedule RequirementsRequires on-call support.Available to work a set schedule that may be changed by management based on the facility's needs.Available to work morning, afternoon, night, or weekends depending on shift and overtime based on the facility's needs.Working ConditionsEnvironmental factors vary by location. You may be working in both inside and outside weather conditions. Exposure to varying climates, including extreme heat or cold, wet, damp, humid, windy, or drafty conditions, is possible. You may be exposed to constant or intermittent noises in addition to moving or shaking objects and equipment.Lifting methods vary based on role, weight, and volume. Associates must follow guidelines, limiting single lifts to 70 pounds. Team lifts are used minimally starting at 70 pounds or when needed. Powered equipment should be used as required, with proper training or assistance from a trained coworker.About Lowe'sLowe's Companies, Inc. (NYSE: LOW) is a FORTUNE® 50 home improvement company serving approximately 16 million customer transactions a week in the United States. With total fiscal year 2023 sales of more than $86 billion, Lowe's operates over 1,700 home improvement stores and employs approximately 300,000 associates. Based in Mooresville, N.C., Lowe's supports the communities it serves through programs focused on creating safe, affordable housing and helping to develop the next generation of skilled trade experts. For more information, visit Pay Range: $27.30 - $34.35 per hourStarting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. For information regarding our benefit programs and eligibility, please visit our .Lowe’s is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Shift: M-F 7:00am-3:30pm or Weekends Fri-Sun (6a-6:30p) A&P Technician II Build an Aviation Career You’re Proud Of At StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. As an A&P Technician II, you will be responsible for performing routine maintenance and major inspections on Gulfstream corporate aircraft. What you'll do: Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment.Examine and inspect engines or other components for cracks, breaks or leaks.Disassemble and inspect parts for wear, warping, or other defects.Assemble and install electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.Service and maintain aircraft systems by performing tasks, such as flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.Repair, replace, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging and hydraulic units.Read and interpret manufacturers and airline’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Requirements: Must be authorized to work in the U.S.Airframe and Powerplant License required, high school diploma or equivalent required.Corporate jet experience performing scheduled and unscheduled maintenance to include: 12/24/36/72-month inspections. Preferred Characteristics: Gulfstream maintenance experience (any model GII through G550) preferredBasic knowledge of operating a personal computer or laptop.Knowledge of job-specific machines and tools, including their designs, uses, repair, and maintenance.Capable of repairing machines or systems using the needed toolsAbility to determine the kind of tools and equipment needed to do a jobAble to perform routine maintenance on equipment and determine when and what kind of maintenance is needed.Capable of determining causes of operating errors and deciding what to do about it.Able to perform tests and inspections of products, services or processes to evaluate quality or performance.Able to install equipment, machines, wiring, or programs to meet specificationsAbility to control operations of equipment or systemsAbility to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.Able to monitor gauges, dials or other indicators to make sure a machine is working properly. Benefits that make life better Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunities Salary: $35-40 per hour based on experience Raising the Standard of Excellence since 1911 With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers’ missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us. Inclusivity Is Our Standard It is StandardAero’s policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $20.00 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#GN0042#

CNC Lathe Operator– 2nd shift Mon-Fri 3:30pm-12:00amPay Range $24-26+ plus 12% shift differentialHiring ImmediatelyMake Your Mark. Shape Your Future.It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of 54,000+ professionals in 60 countries who are making their mark on some of the world’s most beloved brands, including DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more.What You’ll DoAs a CNC operator, you’ll be part of our team located in Fullerton, CA. You’ll get to: Manufacture products in accordance with engineering drawingsCheck product dimensions utilizing proper equipmentRecord, as required, all productivity on company systemClean and maintain machinery according to department and company standards.Who You Are You always strive to do a good jobbut wouldn’t it be great if you could do your job and do a world of good You care about quality – at every level. You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. In fact, you embrace it. You also have:3-5 years of operation experience with CNC Lathes (Twin, Takisawa, Okuma, Mori Seiki or Doosan)Ability to set-up a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC controls.Experience with utilizing a pre-setter off line for tool offsetsExperience with quick change toolingExperience with macro programming and Mastercam or other major programming softwareKnowledge of basic measuring tools, calipers, micrometers, comparators and math requiredSolid understanding of GD&T with ability to read and interpret drawing requirementsMust be able to lift 30 lbs.What You’ll Receive You’ll receive a competitive wage and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.Starting pay rate: $28/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

ESSENTIAL DUTIES AND RESPONSIBILITIES:Perform necessary repairs and maintenance to warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, etc.) to insure that adequate machinery is available for day and night warehouse operations.Review any equipment reports submitted by warehouse associates, record actions/repairs taken, and maintains a repair log per USF policy.Perform PM’s (Preventative Maintenance) on equipment, and maintain PM log with proper documentation, per USF policy.Comply with all USF and government guidelines regarding safety when working on equipment (i.e. Lock Out/Tag Out, placarding and required documentation, safe work environment, etc.)Maintain and secure the battery-charging area, batteries and other equipment contained therein.Responsible for company tools and maintenance equipment used in performance of job duties, including inventory maintenance, safe operation, proper storage, and security of tool area.If authorized, may purchase tools and other equipment needs from local vendors to perform required duties.Performs light maintenance duties as assigned (i.e., replacement of light bulbs, painting, storage rack repairs, light plumbing, equipment repairs, basic drywall and concrete repairs, etc.)SUPERVISIONRELATIONSHIPSInternal: Warehouse personnel and supervisory staff, Operations support, Maintenance and Sanitation personnelExternal: Outside vendorsQUALIFICATIONSEducation/Training: High School education or equivalent preferred; additional mechanic training or trade school degree preferred.Related Experience: A minimum of six months previous mechanic experience required.Knowledge/Skills/Abilities: Knowledge of equipment repair and operation; able to repair and overhaul warehouse equipment; welding ability; able to read and write legibly; able to follow orders; basic mathematical skills (add, subtract, multiply, divide); able to work with little direct supervisionPhysical Requirements:JOB REQUIRES WORKER TO:1. SIT Occasionally2. STAND Frequently3. WALK Frequently4. DRIVE Occasionally (Test drives equipment)JOB REQUIRES WORKER TO LIFT:1. 1-10 lbs (Sedentary) Continuously2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO CARRY:1. 1-10 lbs (Sedentary) Frequently2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO:1. Push/pull Occasionallye.g.: Boxes, pallet jack control arm, hand tools, drive units2. Climb/balance Occasionallye.g.: equipment Pallet Jack, fork lift, order selector3. Stoop/squat Frequently4. Kneel/bend Occasionally5. Bend Frequently6. Reach above shoulder Occasionally7. Grasp objects Frequently8. Manipulate objects Frequently9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $30.00 and $35.00This role will also receive overtime compensationBenefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

Description Position at Thompson Pipe Group - Los Angeles Maintenance ManagerStarting pay from $100,000 AnnualWho We Are:Thompson Pipe Groupis a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From our humble beginnings, we built a family of products to the needs of all kinds of infrastructure. Each generation of products is better than the previous.Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US butallNorth America. Please visit our website atwww.thompsonpipegroup.comJOB FUNCTION:Schedule and direct a crew of Maintenance Mechanics/Technicians involved in one or more maintenance and repair specialties; train and provide work direction and guidance while performing work in one or more of the skilled trades. Promote and maintain a safe work environment.DUTIES AND RESPONSIBILITIES:Manage team in the maintenance and repair of industrial plant equipment, DOT fleet compliance, heavy equipment, welding, and industrial electricSchedule, direct, and manage a crew of Maintenance Mechanics/Technicians involved in maintenance specialties.Provide training, work direction and guidance while performing work in one or more of the skilled trades.Scheduling and track work through a digital software such as MaintainX or similar platform Conduct performance reviews, coach team members, and monitor work of assigned crew members. Provide disciplinary action to assigned crew as required.Perform a variety of skilled work in the maintenance and repair of equipment; prioritize, schedule, assign and coordinate the work of assigned staff to accomplish a wide variety of duties related to maintenance.Construct, rebuild and repair equipment according to assigned job specifications, work orders, and conform to repair estimate costsPerform in an advisory capacity toassure compliance with appropriate safety practices and procedures and with applicable Federal, State and local codes, regulations and requirements.Support and maintain 5-S work area(s).Manages purchasing, installation, maintenance and repair of equipment; perform troubleshooting to repair or replace equipment; perform repairs to equipment.Estimate cost of labor and materials for work orders; obtain competitive prices for equipment and supplies needed.Maintain various records related to labor, materials and work orders.Purchase tools, equipment and materials; operate light trucks to pick up and deliver equipment and supplies.Perform other duties as assigned.Maintain regular attendance.Follow Company Safety policies and standards.KNOWLEDGE AND ABILITIES:KNOWLEDGE OF:Mechanical, Electrical, Hydraulics, Pneumatic, and WeldingScheduling, laying out and assigning work.Appropriate health and safety precautions and procedures.Technical aspects of field of specialtyProper methods of storing equipment, materials and supplies.Basic record-keeping techniques.Requirements of maintaining equipment in a safe, clean and orderly condition.Trade tools, equipment, materials, methods and techniques used in skilled and general maintenance and equipment repair.ABILITY TO:Perform a wide variety of skilled journey-level work in the maintenance and repair of equipment.Prioritize, schedule, assign and review work.Train and provide work direction to assigned personnel in the performance of a wide variety of duties related to mobile equipment.Interpret, explain and apply codes, rules and regulations involved in assigned maintenance activities.Effectively and safely operate a variety of assigned tools and equipment.Interpret work orders to others.Understand and follow oral and written directions.Communicate effectively both orally and in writing.Make arithmetic calculations quickly and accurately.Work independently with little direction.Meet schedules and timelines.Maintain routine records.Establish and maintain cooperative and effective working relationships with others.Observe legal and defensive driving practices.Operate a vehicle and perform heavy physical labor.Lift heavy objects.PHYSICAL DEMANDS:Work is performed while standing, sitting and/or walking.Requires the ability to communicate effectively using speech, vision and hearing.Requires the use of hands for simple grasping and fine manipulations.Requires bending, squatting, crawling, climbing, reaching.Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds.Requires activities involving being around moving machinery, exposure to changes in temperature, exposure to dust and fumes.EDUCATION AND EXPERIENCE:High school diploma or G.E.D.Minimum of ten (5) years’ experience in one or more of the skilled trades.LICENSES AND OTHER REQUIREMENTS:Valid driver's license in the work location State.What We OfferTop-tier Medical, Dental, and Vision BenefitsLife and Supplement LifeCompany Matched 401K Retirement PlanPaid HolidaysFun EventsTraining and DevelopmentEmployee DiscountsCareer Opportunity!Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request.An Equal Employment Opportunity (EEO) employer that welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.Drug free workplace.Based in the United States, applicants must be eligible to work in US without restrictions for any employer at any time; be able to pass a drug screen and background check.

Overview: Now Offering up to $10,000 SIGN-ON BONUS to qualified Technicians! 50% of bonus to be paid out after 6 months of employment; 50% after one year of employment. Relocation assistance may also be available to qualified out-of-town candidates!WE WILL PAY YOU AT LEAST $5 MORE PER HOUR!* | MARKET LEADING PAY, PLUS BONUSES EARN OVER $100K a YEAR!Mercedes-Benz of Beverly Hills is part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Quality Automotive Service Technicians/Mechanicsto work with our Quality Dealershiprepresenting a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees. We offer...Market Leading Pay that could be up to $5.00 per hour more than your current rate (*based on a recent pay stub, your technical qualifications, OEM or ASE certifications, experience and work history), plus bonuses.Relocation AssistanceWe are the only dealer in the LA market to have an employee shuttle service for our technicians from your home to work and back home, every day you work!A Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionPinnacle Awards ProgramHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanYou need5 years or more MBZ trained Automotive Technician/Mechanic ExperienceA Love of Everything AutomotiveA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.This position will pay $31 - $68 per PRB/Flag = Performance Revenue Bonus ($65,000 - $160,000 per year).IND1

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $20.00 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#GN0042#

Maintenance Technician; 1st shift 5am-1:30pm; $32/hrMake Your Mark. Shape Your Future.It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of 54,000+ professionals in 60 countries who are making their mark on some of the world’s most beloved brands, including DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more.Job SummaryInstalls, maintains, troubleshoots, and repairs industrial equipment and facility infrastructure by performing the following duties.What You’ll DoAs a Maintenance Technician, you’ll be part of our team located in Fullerton, CA. You’ll get to:Ensures operation of plant equipment by completing preventive maintenance requirements and performing adjustments on the following but not limited to; motors, pneumatics, conveyor systems, and production machines; ability to read and comprehend diagrams, sketches, operational manuals, manufacturer's instructions, and engineering specifications; troubleshooting electrical and mechanical malfunctions.Utilize troubleshooting techniques to locate sources of problems by observation, using precision measuring, testing equipment and instruments.Must be familiar with high voltage (480v, 220v & 120v) and low voltage circuits and be able to read associated manuals and drawings.Familiar with CNC machines, punch presses, and other various metal forming machines a big plus.Responsible for documentation of preventative maintenance, product equipment and/or processes.Maintains supplies inventory levels and anticipates needed equipment, parts, and supplies and expediting orders if need be.Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment, as directed.Rigs equipment for installation or relocation, as directed.Plans and layouts assigned projects of wiring, conduit, and electrical items as needed.Prepares maintenance reports by collecting, analyzing, and summarizing information and trends.Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks.Assists with EHS initiatives as directed.Assumes additional responsibilities as required.Who You Are You always strive to do a good jobbut wouldn’t it be great if you could do your job and do a world of good You care about quality – at every level. You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. In fact, you embrace it. You also have: Experience with pneumatics, hydraulics, electrical, water, PLC, welding, or analytical troubleshooting required.Must be able to fabricate, weld, or machine parts as requiredMust have some knowledge of mechanical troubleshooting including power transmission, fluid power, and pneumatics.Ability to read, write, and understand written specifications, procedures, drawings and prints.Ability to design and execute from verbal instructions.Must possess good mechanical aptitude and have the ability to work on close tolerance equipment and/or parts.Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs.Ability to use various measuring devices (torque wrench, micrometers, Vernier calipers, dial indicators, etc.)Must be able to use math to calculate dimensions and determine equipment setups.Forklift and scissor lift trained, a plus.Safety and quality conscious.What You’ll Receive You’ll receive a competitive salary and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs.What’s more, you’ll get that pride that comes from empowering makers, doers, protectors and everyday heroes all over the world. We’re more than the #1 tools and storage company and #2 security solutions provider, with a leading presence in engineered fastening. We’re visionaries. Industry 4.0 innovators. As successful as we’ve been in the past, we have so much further to go. That’s where you come in. Join us!All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.Starting pay rate: $41.52/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

ESSENTIAL DUTIES AND RESPONSIBILITIES:Perform necessary repairs and maintenance to warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, etc.) to insure that adequate machinery is available for day and night warehouse operations.Review any equipment reports submitted by warehouse associates, record actions/repairs taken, and maintains a repair log per USF policy.Perform PM’s (Preventative Maintenance) on equipment, and maintain PM log with proper documentation, per USF policy.Comply with all USF and government guidelines regarding safety when working on equipment (i.e. Lock Out/Tag Out, placarding and required documentation, safe work environment, etc.)Maintain and secure the battery-charging area, batteries and other equipment contained therein.Responsible for company tools and maintenance equipment used in performance of job duties, including inventory maintenance, safe operation, proper storage, and security of tool area.If authorized, may purchase tools and other equipment needs from local vendors to perform required duties.Performs light maintenance duties as assigned (i.e., replacement of light bulbs, painting, storage rack repairs, light plumbing, equipment repairs, basic drywall and concrete repairs, etc.)SUPERVISIONRELATIONSHIPSInternal: Warehouse personnel and supervisory staff, Operations support, Maintenance and Sanitation personnelExternal: Outside vendorsQUALIFICATIONSEducation/Training: High School education or equivalent preferred; additional mechanic training or trade school degree preferred.Related Experience: A minimum of six months previous mechanic experience required.Knowledge/Skills/Abilities: Knowledge of equipment repair and operation; able to repair and overhaul warehouse equipment; welding ability; able to read and write legibly; able to follow orders; basic mathematical skills (add, subtract, multiply, divide); able to work with little direct supervisionPhysical Requirements:JOB REQUIRES WORKER TO:1. SIT Occasionally2. STAND Frequently3. WALK Frequently4. DRIVE Occasionally (Test drives equipment)JOB REQUIRES WORKER TO LIFT:1. 1-10 lbs (Sedentary) Continuously2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO CARRY:1. 1-10 lbs (Sedentary) Frequently2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO:1. Push/pull Occasionallye.g.: Boxes, pallet jack control arm, hand tools, drive units2. Climb/balance Occasionallye.g.: equipment Pallet Jack, fork lift, order selector3. Stoop/squat Frequently4. Kneel/bend Occasionally5. Bend Frequently6. Reach above shoulder Occasionally7. Grasp objects Frequently8. Manipulate objects Frequently9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $30.00 and $35.00This role will also receive overtime compensationBenefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

Description Position at Thompson Pipe Group - Los Angeles Excavator Equipment Operator Thompson Pipe Group is looking for aExcavator Equipment Operator. Starting Pay: $25.00/hour Who We are: Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From our humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all North America. Please visit our website at www.thompsonpipegroup.com. ESSENTIAL DUTIES AND RESPONSIBILITIES:Duties include but are not limited to the following: Practice safety in your every move, estimating weights and distances, being fully aware of your surroundings, doing your part to minimize hazards and reporting any injuries or damage immediatelyOperation of excavator to break up concreteDetermine methods and needs project equipment with onsite Crew leader to procure equipment;Inspect heavy equipment and handle preventive maintenance dailyOperate equipment productively for shift every day in all weather and ground conditionsOperate heavy equipment like sand trucks, bobcats, forklifts, cranesLoad and unload construction materials, waste, and other heavy objects from trucks and into dumpsters either manually or with the assistance of a machine;Change attachments, adjust, verify information, and troubleshoot problems;Store and clean machinery at its designated location and complete work reports at the end of each working day;Always follow safety proceduresLoad and unload various materials Physical Demands & Work Environment Requires the ability to communicate effectively using speech, vision, and hearing.Requires the use of hands for simple grasping and fine manipulations.Requires activities involving being around moving machinery, exposure to changes in temperature, exposure to dust and fumes.Use of ear plugs and other PPE (Personal Protective Equipment) – such as hard hat, steel-toes boots, gloves, and safety glasses as required.The work environment is not climate controlled and subject to outdoor weather conditions. Team members are exposed to sounds and noise levels that are distracting. Qualifications: Dependable: willing and able to work up to 6 days per week, up to 12 hours per day in extreme circumstancesMust have a safety-first attitudeMust have previous excavator operation experienceMust have a valid driver’s licensePrevious experience operating a large forklift a plus (36,000 or more)Bilingual a plus (Spanish/English)Flexible, able to multi-task and to support multiple areasOrganized, able to maintain documentation as well as yarding productStrong communication skillsHigh School Diploma or G.E.D. Must pass Pre-employment Physical and drug test. Not A Warehouse Job. Precast Concrete Pipes is what we do. What We Offer Medical, Vision and Dental, Life BenefitsLife & Supplement LifeCompany Matched 401K retirement planVacation & Sick LeaveTraining and DevelopmentCareer Opportunity!$1,000.00 Referral Bonus Apply Now! We are located at3009 N Laurel Avenue Rialto, CA 92377 Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions upon request. Thompson pipe group is an Equal Employment Opportunity (EEO) employer that welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or another legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace. EOE/AA – M/F/Vet/Disability

Overview: Looking for Toyota or Lexus Technicians!!!NEWPORT LEXUS is part of the fast growing Group 1 Automotive, a leader in automotive retail and service. We are growing and looking for Quality Automotive Service Technicians/Mechanics, to work with our Quality Dealership, representing a Quality Product! Our Service Technicians should be passionate about customer service, take pride in their work, and enjoy being part of a winning team that cares about their employees.The salary range for this position is between $70,000-$150,000/year.We offer:A Great Working Environment with the Latest EquipmentStructured, Self-paced and Paid Training Opportunities Leading to Manufacturerand Group 1 RecognitionHealth, Dental & Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards Program You needAutomotive Technician/Mechanic Experience (Lexus or Toyota)A Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* IND1

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment Whether you are looking for a part-time job with flexible hours, or a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $20.00 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#GN0042#

Quality Inspector1st shift 5am-3:30pm$24-$27/hour plus quarterly bonusMake Your Mark. Shape Your Future.It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of 54,000+ professionals in 60 countries who are making their mark on some of the world’s most beloved brands, including DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more.What You’ll DoAs an Inspector, you’ll be part of our team located in Fullerton, CA. You’ll get to:Maintains a safe working environment by ensuring compliance with procedures and safety regulations.Ensures quality standards are met.Follows general inspection guidelines to conduct critical non-routine visual, dimensional, mechanical, and functional inspections on a wide variety of components, assemblies and materials.Maintains inspection records and documentation in accordance with government, customer, and Company standards.Assists Quality Assurance during internal audits and customer audits as needed.Inspects incoming materials by confirming product meets drawings and specifications; conducting visual and measurement tests; documenting and communicating rejections of unacceptable items.Inspects in-process production by confirming product meets applicable drawings and specifications; conducting visual and measurement tests; documenting and communicating required corrections.Inspects finished products by confirming product meets drawings and specifications; conducting visual and measurement tests; documenting and communicating required corrections and ensuring defective product is not delivered to the customer.Who You Are You always strive to do a good jobbut wouldn’t it be great if you could do your job and do a world of good You care about quality – at every level. You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. In fact, you embrace it. You also have: Must be proficient using hand measuring instruments (micrometers, calipers, height gages, optical comparator etc.).Must be proficient in applying the principles of GD&T for blueprint / model interpretation and acceptance activities.Ability to read engineering and manufacturing drawings.Responsible for conducting First Article, In-Process, Final inspections and accurate report generating utilizing AS9102 FAIR format.Experience with Quality Management System principles ISO9001: 2008, AS 9100D etc.Generate and maintain Nonconformance reports and records.Participate in Corrective Action processes, including containment plans, root cause analysis, corrective countermeasures, and providing objective evidence for verification / closure.Accurately document the results of inspections and issue Certificates of Conformance.Maintain and archive controlled document files and records in a timely and accurate manner.Participate in internal and external audit activities as needed.Provide feedback on the quality aspects of parts and assemblies to QA and Production.Ability to interact with Production for communicating inspection results.Must work well with others and maintain a professional environment.Review contracts, purchase orders, drawings, routings, shop instructions and other planning for quality requirements3+ year of manufacturing experience in a fast-paced environment.Able to lift 20lbs frequently and stand for long periods of time.What You’ll Receive You’ll receive a competitive salary and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs.What’s more, you’ll get that pride that comes from empowering makers, doers, protectors and everyday heroes all over the world. We’re more than the #1 tools and storage company and #2 security solutions provider, with a leading presence in engineered fastening. We’re visionaries. Industry 4.0 innovators. As successful as we’ve been in the past, we have so much further to go. That’s where you come in. Join us!All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least two (2) to three (3) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.Starting pay rate: $39.33/hour MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

ESSENTIAL DUTIES AND RESPONSIBILITIES:Perform necessary repairs and maintenance to warehouse-related equipment (i.e. pallet jacks, highlifts, forklifts, etc.) to insure that adequate machinery is available for day and night warehouse operations.Review any equipment reports submitted by warehouse associates, record actions/repairs taken, and maintains a repair log per USF policy.Perform PM’s (Preventative Maintenance) on equipment, and maintain PM log with proper documentation, per USF policy.Comply with all USF and government guidelines regarding safety when working on equipment (i.e. Lock Out/Tag Out, placarding and required documentation, safe work environment, etc.)Maintain and secure the battery-charging area, batteries and other equipment contained therein.Responsible for company tools and maintenance equipment used in performance of job duties, including inventory maintenance, safe operation, proper storage, and security of tool area.If authorized, may purchase tools and other equipment needs from local vendors to perform required duties.Performs light maintenance duties as assigned (i.e., replacement of light bulbs, painting, storage rack repairs, light plumbing, equipment repairs, basic drywall and concrete repairs, etc.)SUPERVISIONRELATIONSHIPSInternal: Warehouse personnel and supervisory staff, Operations support, Maintenance and Sanitation personnelExternal: Outside vendorsQUALIFICATIONSEducation/Training: High School education or equivalent preferred; additional mechanic training or trade school degree preferred.Related Experience: A minimum of six months previous mechanic experience required.Knowledge/Skills/Abilities: Knowledge of equipment repair and operation; able to repair and overhaul warehouse equipment; welding ability; able to read and write legibly; able to follow orders; basic mathematical skills (add, subtract, multiply, divide); able to work with little direct supervisionPhysical Requirements:JOB REQUIRES WORKER TO:1. SIT Occasionally2. STAND Frequently3. WALK Frequently4. DRIVE Occasionally (Test drives equipment)JOB REQUIRES WORKER TO LIFT:1. 1-10 lbs (Sedentary) Continuously2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO CARRY:1. 1-10 lbs (Sedentary) Frequently2. 10-20 lbs (Light) Frequently3. 25-50 lbs (Medium) Occasionally4. 50-100 lbs (Heavy) Occasionally5. Over 100 lbs (Very Heavy) NeverJOB REQUIRES WORKER TO:1. Push/pull Occasionallye.g.: Boxes, pallet jack control arm, hand tools, drive units2. Climb/balance Occasionallye.g.: equipment Pallet Jack, fork lift, order selector3. Stoop/squat Frequently4. Kneel/bend Occasionally5. Bend Frequently6. Reach above shoulder Occasionally7. Grasp objects Frequently8. Manipulate objects Frequently9. Twisting OccasionallyCompensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $30.00 and $35.00This role will also receive overtime compensationBenefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.