Aircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Sign on bonus eligibleThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221112Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on customer engagement. In this challenging position, the Field Service Technician (FST) provides real-time technical support to our customers and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Knowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.Communicate by word and actions Flowserve’s values for ethics, safety, and qualityOther duties as assigned. Requirements: 8+ years of relevant experienceExperience with installing mechanical equipmentExperience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O ringsProven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervisionProficiency in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the roleAble to travel, including globally, for extended periodsAble to work overtime as required to minimize impact on customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round. Preferred Experience / Skills: High School Diploma / GEDExperience in the nuclear industryProfessional certifications in this field.Ability to work collaboratively with unfamiliar teams.Excellent communication skillsGood organizational skills The pay range for this position is 42.46 - 63.72 USD Hourly Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-10708 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: We are seeking a Master AutomotiveMechanicwhowill perform all needed maintenance and repairs on all fleet vehicles. TheMechanicis required to perform all other duties as required and needed. Experience working with Chevy models and Ford vehicles preferred.We Offer:Excellent pay rate 40 hours a week, not flat rateOT as needed over 40 hoursPaid vacationCompany provided uniform401K plan availableBenefits: Medical, Vision and DentalCorporate partner discount programAbility to advance through a national companyResponsibilities:Perform preventive maintenance inspections and repairs.Assist and repair Drivers concerns on vehicles.Air Conditioning diagnosis and repair.To perform electrical diagnosis and repairs.Perform diagnosis, service and repairs on heating and air conditioning systems.Perform fluid and filter changes on Engine, Transmission, Differential, Cooling system, etc.Perform vehicle computer diagnostics, using computer scanners and digital volt ohm meters.Perform major engine components diagnosis and replacement, i.e. cylinder head, exhaust manifold, intake manifold, cam shafts etc.Write repair orders legibly with detailed repair information. Qualifications: Talent Requirements:Ford and/or GM experience a must. (light to medium duty vehicles)Must display initiative, professionalism, candor and tactat all times.Must be self-motivated and able to perform with minimal to no supervision.This position is considered safety sensitive.The Technician must become ASE Certified in the approved category(s), requirement to obtain ASE certification.Minimum three (3) to five (5) years verifiable hands-on shop experience.Automotive diagnostic experience a must.Must have own tools for this class of Technician.Experience with CNG fuel systems helpful.Able to lift 70 pounds.Can work varied schedule: days, evenings and/or weekends.Starting pay rate: $45/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#CB#appcast

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training.What's in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. Compensation: $24.00 - $26.00/hr What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

MAINTENANCE TECHNICIAN South Gate, CA, USAReq #8837 Monday, September 18, 2023 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust People • Customers • TrustWe are seeking applicants forMaintenance Technicianin our South Gate corrugated facility located at 9700 Frontage Road East, South Gate, CA 90280Pay Rate: $25.26 - $39.95 per hour based on skills ($37.89 - $59.92 per hour, overtime pay rate for hours worked in excess of 40 per week)Competitive Benefits: Medical, Dental, Vision Insurance, 401K, Gain Sharing Bonus, Vacation, Holidays...)PCA provides up to 100 paid training hours per year to help technicians advance through the progressive skill levels and achieve higher pay.Technicians supply their own basic hand tools. PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools. PCA provides all special and heavy tools.PCA provides Safety shoes and Safety Glass stipendsSUMMARYResponsible for maintaining all converting and corrugating equipment to minimize downtime.RESPONSIBILITIES:Perform a variety of maintenance tasks to diagnose, repair, rebuild, replace mechanical, electrical, hydraulic, and pneumatic systems on all plant equipment and facilities. Must be able to follow all safety and company policies that include lock-out tag-out procedures. Responsible for maintaining all converting and corrugating equipment to minimize downtime.Visually inspects and tests machinery and equipment by performing preventive and routine maintenance tasks.Willingly work all necessary hours and shifts and is able to work on call as needed.Additional duties may be assigned by management.BASIC QUALIFICATIONS:High school diploma or GED.Minimum of 1 year(s) Industrial Maintenance experience with troubleshooting and repairing industrial machinery”. Basic Electrical experience and troubleshooting abilityKnowledge of Mechanical and Electrical drawings.Able to pass pre-employment background check and drug test.Must be able to stand, kneel, crouch, crawl, sit, stoop, and bend.Must be able to work overtime and weekends as needed.Must be authorized to work in the U.S.PREFERRED QUALIFICATIONS:Computer proficiency including Microsoft and Windows productsExperience with PLC programming, especially Siemens and Allen-Bradley a plusExperience with and knowledge on machine control systemsExperience in a packaging or other manufacturing environment is preferredTechnical degree in Mechanical or Electrical Trades is a plusAllqualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyHiring Rate$25.26Job Start DateMonday, October 9, 2023

Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN US We understand that hiring great people is the foundation of everything we do. Our employee benefits packages include: Competitive pay Medical, Dental, Vision and Prescription coverage Paid vacation and holidays 401(K) match Life insurance, AD&D and long-term disability Tuition reimbursement Opportunities available nationwide Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more Pet Insurance Legal Plan, and ID Theft Protection Responsibilities: The HVAC Branch Manager leads technicians who install, repair, and maintain HVAC and refrigeration systems for commercial customers. This manager routinely works directly with service and install technicians, dispatch personnel, and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting himself as a senior company representative, the Branch Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements. Interviews, screens, and evaluates HVAC technicians to meet workload demands.Schedules, directs, and provides technical support for HVAC technicians to meet service demands and customer expectations.Reviews technician's work, techniques, and safety requirements to ensure quality meets established standards, and makes recommendations to improve quality and productivity.Identifies training needs of staff and facilitates delivery of a regular training program to ensure that HVAC technicians are properly trained on the latest service techniques and safety procedures for equipment and general working conditions.Compliance with all applicable health and safety regulations, policies, and established work practices. Ensures appropriate employee safety training and compliance is completed.Responsible for staff performance appraisals, and reviews and for setting improvement goals per company requirements.Responsible for working with technicians in the field and resolving customer's and technicians' issues.Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency, and training requirements.Communicates daily with dispatch reporting on project information, estimated time to complete jobs, labor hours, and parts or material used.Reviews work orders, invoices, and time reports for accuracy and maintains minimal accounts receivables.Develops and monitors budgets, goals, and objectives to ensure departmental profitability.Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational problems with products, premature failures, and other issues.Monitors assigned service vehicles to ensure they are being maintained, and operated according to company policy, and that an adequate inventory of parts and materials are maintained. Qualifications: 5+ years of successful and recent HVAC and Refrigeration service management experience.Two years of technical training or a bachelor's degree is preferred.Ability to perform advanced-level maintenance and service on HVAC and Refrigeration equipment.Solid working knowledge of Word, Excel, and Outlook and the ability to learn new systems.EPA Universal CertificationValid driver's licenseProblem-solving and conflict-management skills.Detail-oriented and highly organized with the ability to handle multiple tasks and assignments.Ability to generate ideas and create processes to grow the service department.Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.Ability to work well with management, executive leadership, support staff, and technicians.Ability and willingness to work a non-standard schedule: nights, weekends, and holidays, as necessary. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Responsibilities: Oversees, plans and issues work orders to appropriate shift team members for the implementation of equipment modifications as well as preventative and any corrective maintenance.Prepares andcoordinates maintenance resources and provides recommendations for capital and continuous improvement projects.Reviews the operation of equipment with appropriate personnel to identify maintenance issues in the areas of Safety, Quality, Cost, Productivity and Customer Satisfaction.Reviews location’s Key Performance Indicators KPIs (Daily, Weekly and Monthly) to make recommendations for improving plant operations, OEE (Overall Equipment Effectiveness) and maintenance problem resolution.Tracks, analyzes and improves the Maintenance department’s KPIs.Engages employees in problem resolution in order to improve production issues/efficiencies utilizing Lean Manufacturing techniques as needed.Fosters a positive working environment and drives Maintenance team to meet set productivity targets and performance standards.Ensures all regulatory compliance with various governmental agencies such as city, county, state is met on a consistent basis.Monitors and reviews Maintenance budget on a monthly basis; Prepares and implements annual budget each fiscal year.Assists in recruitment process of Maintenance personnel.Ensures Maintenance employees are properly trained in all aspects of their jobs. Identifies training gaps and develops training plans as needed.Performs other duties as assigned. RequirementsBachelor's degree in engineering or operations management.Possesses 5-7 years of experience in Industrial Automation, PLCs, Pneumatics and Hydraulics, Injection Molding preferably in the Packaging Industry.Management experience in operations, maintenance, engineering and/or process improvement roles including managing teams of people.Previous experience working in a Lean environment preferred.Six Sigma Green or Black Belt Certification a plus.Exceptional leadership and proven team-building skills.Excellent analytical thinking and innovative problem-solving skills.Has the ability to multi-task, prioritize in a fast-paced environment.Microsoft Office Proficiency; SAP knowledge preferred.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary Paid vacation/holidays/sick time - 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out: https://youtu.be/pdZMNrDJviYWhat you will do:Under general direction is responsible for the sale of Johnson Controls BE offerings to mechanical contractors, designers and consulting engineers. Promote the Johnson Controls value proposition to construction community by providing business and technical solutions. Builds and manages long term customer relationships/partnerships with assigned accounts. Responsible for customer satisfaction and loyalty while working in conjunction with operations partners. Positions renewable service agreements as a foundation of managed account relationships.Executes the sales process to aid in cultivating and managing long-term relationships and in seeking out, qualifying and closing new sales opportunities. Utilizes sales tools to plan and document sales progress as well as increase business opportunities across all BE-LOBs in assigned accounts. Seeks to expand the depth and breadth of Johnson Controls offerings sold within assigned accounts. Actively participates as a member on select account teams on key and target customer accounts. May lead the account team(market customer leader)on assigned target and key accounts where significant growth opportunities exist and more robust expertise is required from others to solidify the opportunity. Seeks to continually develop sales skills and to enhance knowledge of the JCI product and service offerings.How you will do it:Sells, with minimal supervision, the Johnson Controls offerings persuasively, persistently and confidently to all members of the construction community to include contractors, consultants and designers while reaching optimal profit levels. Focuses on all opportunities to allow the contractor to achieve business objectives. Manages multiple, ongoing, opportunities. Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing assigned customers.Builds partnering relationships with the owner construction community responsible for the decision-making process to drive the sale of Johnson Control offerings. Actively listens, probes and identifies concerns. Understands the customer's business cycle customer base. Demonstrates technical and business expertise and maintains a high level of credibility. Garners loyalty, trust and commitment from the customer.Seeks out, targets and initiates contact with multiple prospective customers in alignment with JCI strategy. Develops and maintains a network of industry contacts. Understands and leverages the sales process outcomes as well as demonstrates evidence of advancing the sell. Shares technical knowledge plus business expertise with the customer to match the solution to the customer’s operational need and favorably position Johnson Controls. Qualifies and assesses potential customers.Addresses customer's operational and environmental objectives, needs and requirements. Recommends solutions and links customer objectives to total value solution and competitive advantage. Differentiates Johnson Controls services and products from competitors by applying creativity, ingenuity, and innovation in a value added sales approach.Positively and credibly influences BE strategies with the construction community. Frequently creates competitive, high quality and timely estimates, proposals, and cost/benefit analysis. Effectively writes, and presents proposals. Negotiates value, addresses resistance and closes the sale. Differentiates Johnson Controls as a total building environment supplier.Utilizes applicable sales tools effectively to plan and document progress as well as increase business opportunity in accounts. Leverages Johnson Controls sales process to close sales quickly. Manages the high activity of the pipeline in the managed system with a focus on sales phase, close date, and probability of a close as well as other pertinent information.Acts as the customer’s advocate in interactions with Johnson Controls to ensure the customer obtains the best value from Johnson Controls offerings. Sets appropriate customer expectations on Johnson Controls offerings. Participates in final project inspection. Ensures that the customer is trained and oriented to system operation and the value of services delivered.What we look for:Bachelor’s degree in business, engineering, or related discipline required. A minimum of six (6) years of successful field sales experience. At least three (3) years successfully selling HVAC or building automation system industry. Demonstrates a commitment to integrity and quality in business. Excellent initiative and interpersonal communications skills. Demonstrated ability to influence the market at key levels.HIRING SALARY RANGE: $70K-$90K annual base salary + Target Incentive (TI) earnings for achieving quota expectations (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role offers a competitive Sales Incentive Plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers#SalesHiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.Water might seem simple enough, but there is a lot going on beneath the surface. Working in a factory or warehouse requires rolling up your sleeves to get things done and the tenacity to go the extra mile again and again. We believe the rewards are worth the effort: a business you help shape, a supportive team you learn from, and the chance to have a sustainable impact in which you can truly be proud.Job DescriptionWe are seeking a Maintenance Supervisor who will be part of the leadership team for our manufacturing plant. We are seeking someone who would have flexibility to work either a day or overnight shift as required by the needs of the plant.Key responsibilities include: • Part of the Maintenance leadership team responsible for plant technical operations, specifically production line maintenance, processing equipment maintenance and utility equipment maintenance • Assist with leading the preventative maintenance process, defining processes, driving improvements and achieving KPI targets • Coach, mentor and develop front line employees to meet current and future business requirements • Help lead change initiatives and continuous improvement efforts, including the implementation of a LEAN manufacturing environment • Utilize and model our beliefs in the execution of daily work activities and decision-making • Build relationships with frontline team members to help create and maintain a positive work environment • Partner with internal customers and suppliers, colleagues, and support services to ensure achievement of targets • Understand and adhere to internal and external regulations, procedures & policies Maintain cleanliness to • GMP standards and ensure all safety standards are met Effectively communicate safety, quality, technical and training issues to team • Review daily maintenance effectiveness to identify opportunities for improvement and work with the • Operations team to get resolution • Ensure the development and implementation of action plans to address root causes of failuresQualificationsKey qualifications include: • Associates degree in engineering or industrial technology, or equivalent combination of education and/or experience. • Five or more years of experience in industrial maintenance with at least two or more years of experience in a leadership capacity • Prior experience in a beverage, food or other clean manufacturing environment with familiarity with quality, GMP and hygiene regulations preferred. • Prior experience with pneumatics, hydraulics, electric systems and PLC control systems and communication systems. • Knowledge of preventative maintenance programs with a grasp of financial factors in maintenance. • Strong computer skills including Microsoft Suite applications; business management software (SAP preferred) needed. • Understanding of production processes & technical troubleshooting and root cause analysis skills. • Continuous improvement or process improvement experience. Green belt or black belt certification or prior TPM • Effective communication and presentation skills with the ability to facilitate change• Time management, delegation and organization skills with strong problem solving ability • Ability to grow relationships with business partners and to lead, coach and develop employees • Schedule flexibility with the ability to provide on call coverage.Pay Range: $80,000 - $95,000. This role is eligible for a 10% annual bonus.Salary Range Disclaimer: The salary range provided for this position is an approximation based on market research, internal compensation data and the candidate’s qualifications and experience. Final salary offers are determined through a comprehensive evaluation of candidate qualifications and may vary depending on factors such as skills, experience, and geographic location of the position. Other components of the compensation package, including benefits and bonuses, will also be considered. We are committed to fair and equitable compensation practices, and we encourage open dialogue about compensation during the interview process.BlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees. BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.BlueTriton Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. BlueTriton Brands is committed to providing reasonable accommodation for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please contact us at

Overview: OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with America’s Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At America’s Tire, we commit to growing our employees and routinely promote from within.Part-Time100% On SitePay Starting at $17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at America’s Tire performs the following duties, including but not limited to:• Install new tires and wheels• Perform maintenance on tires, including rotations, balancing, repairs, and cleaning• Rewarding Career Path to Management• Follow safety guidelines and best practices• Participate in hands-on, on-the-job training• Provide a world-class customer service experienceWhat We’re Looking For:• Must have an upbeat outlook• Must be dedicated and reliable• Must be coachable and trainable• Must be able to lift a minimum of 50 lbs.• Must enjoy and excel in a team environment• Must be able to function well in a physically demanding environmentWhat We Offer:America’s Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:• Paid Training• Competitive Pay• Weekly Paychecks• 401(k) Retirement Plan• Employee Referral Bonus• Employee Assistance Program• Educational Assistance Program• Exclusive Employee Discount ProgramAmerica’s Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names America’s Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why America’s Tire At America’s Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at America’s Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first America’s Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, America’s Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first America’s Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.America’s Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make America’s Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.americastire.comAmerica’s Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Auto Damage Trainee – Costa Mesa, CASalary: $28.29 per hour / $57,000 annuallyAccidents can be scary, and our Auto Damage team rises to the occasion to provide unparalleled customer service when our customers need us the most. We’re looking for Auto Damage Trainees in Costa Mesa, CA who are motivated and ready to grow their careers to the next level with GEICO. Flexibility to work in different environments is also key, as our auto damage adjusters may work from their home, a body shop, a virtual estimating center, or even on the road.Our industry-leading, paid training, which includes 3-weeks of required hands-on experience at our Ashburn, VA training facility will teach you the ins and outs of automobile damage adjusting. We will provide the resources and training so you can directly assist our customers after accidents or major disasters. We're looking for those who are equally motivated as they are compassionate. Your unique skillset, along with the latest auto-adjusting tools and tech, will help you.: Inspect and assess vehicle damage caused by all types of accidents Estimate vehicle repair costs and negotiate equitable settlements Partner with other adjusters and supervisors to work with body shops, rental partners, and parts providers.As an Auto Damage Trainee, you’ll be constantly challenged to continue growing your skills and knowledge to better understand our industry, company, and customers. If you want a career with plenty of growth opportunities, let’s talk.Salary:Salary: $28.29 per hour / $57,000 annuallyQualifications & Skills:Valid driver’s license (must meet company underwriting guidelines for at least the past 3 consecutive years) and the ability to maintain applicable state and federal certifications and permitsWillingness to be flexible with primary work location – position may require either remote or in-office workSolid computer, mechanical aptitude, and multi-tasking skillsEffective attention to detail and decision-making skillsAbility to effectively communicate, verbally and in writing, and willingness to expand on these abilitiesMinimum of high school diploma or equivalent, college degree or currently pursuing preferredAnnual Salary$28.29 - $44.17The above annual salary range is a general guideline. Multiple factors are taken into consideration to arrive at the final hourly rate/ annual salary to be offered to the selected candidate. Factors include, but are not limited to, the scope and responsibilities of the role, the selected candidate’s work experience, education and training, the work location as well as market and business considerations.At this time, GEICO will not sponsor a new applicant for employment authorization for this position.Benefits:As an Associate, you’ll enjoy our Total Rewards Program* to help secure your financial future and preserve your health and well-being, including:Premier Medical, Dental and Vision Insurance with no waiting period**Paid Vacation, Sick and Parental Leave401(k) PlanTuition ReimbursementPaid Training and Licensures*Benefits may be different by location. Benefit eligibility requirements vary and may include length of service.**Coverage begins on the date of hire. Must enroll in New Hire Benefits within 30 days of the date of hire for coverage to take effect.The equal employment opportunity policy of the GEICO Companies provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. GEICO hires and promotes individuals solely on the basis of their qualifications for the job to be filled.GEICO reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job, unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and associates. GEICO also provides a work environment in which each associate is able to be productive and work to the best of their ability. We do not condone or tolerate an atmosphere of intimidation or harassment. We expect and require the cooperation of all associates in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all associates and applicants.

BRIEF DESCRIPTION:The Carpenter is an experienced and trainable laborer skilled in carpentry in multiple areas of residential and commercial rebuilding with experience in insurance restoration work. Must be able to communicate on a high level during the reconstruction process. This position reports directly to the Project Manager. Individual should have reliable truck and tools to complete work at a high skill level.Base Salary Range is $25 - $30 per hourPRINCIPAL DUTIES & RESPONSIBILITIES:General carpentry - residential and commercialDemolitionTile WorkHanging cabinetsTrim carpentry-baseboardsDoor hanging and tapingPaintingLight electrical/plumbingRough framing consisting of re-framing homes and setting trussesEnsure company and customer satisfaction through professional appearance, expert workmanship and polite communication.Comply with safety, quality & procedural standardsSUPERVISORY RESPONSIBILITY:This position has no direct reportsQUALIFICATIONS & REQUIREMENTS:Direct experience working as a skilled carpenter requiredKnowledge of carpentry and use of carpentry related hand and power toolsSelf-motivatedWork in confined areas (crawl space)Understand and follow oral and written instructionsCommunicate effectively in oral and written forms. Execute required paperworkIdentify hazards in assigned work areasWork safely without presenting a direct threat to self or othersMeet the mental and physical demands of the jobAbility to work with people in a professional mannerMaintains a valid and current driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningEDUCATION:High school diploma or GED equivalent requiredWORK ENVIRONMENT & PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The employee must regularly lift and/or move between 25-50 pounds. While performing the duties of this job, the employee is regularly required to stand, walk, use hands and fingers to handle material, hands andarms, and talk and hear. The employee is required to stoop, kneel, crouch, or occasionally crawl. The employee is occasionally required to sit.TRAVEL:Availability for travel in response to out-of-town projects and/or catastrophic events. Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base salary and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental and vision), paid time off, disability, laptop, smartphone, and corporate apparel allowance.BluSky also offers extended benefits such as: Employee Assistance Program, Accident & Critical Illness Coverage, LegalShield, Professional Development, Paid Referral Program, and more.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation or any other applicable status protected by Federal, State or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law. Application Duration:To ensure a thorough and fair selection process, we would like to inform you that the application deadline for this position is April 19, 2024 . Please ensure that your application is submitted by this date for consideration.To be considered for this position you must complete the online application located at www.goblusky.com/careers.

Overview: Ramona Tire & Service Centers have been serving Southern California for over 45 years with honesty and integrity. Drive over to one of our 17 convenient locations for professional automotive service and new tires at reasonable prices. Experience the difference our shops make the next time you need automotive services. Our mission is to provide the highest quality customer service available anywhere.The Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and our company standards. COMPENSATION : VARIES FROM $75,000 - $95,000 PER YEAR, DEPENDING ON EXPERIENCE Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Employee Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement, up to $3,000 annually Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance (Effective 1 st of the Month after Hire) Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement! Qualifications: Prefer a minimum of one unexpired ASE or equivalent experience or training. Possess a valid driver's license or obtain a valid driver's license within 30 days of hire date. Ability to work a minimum of five days, including Saturdays. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.#bayard

Job Description - Electro-Mechanical AssemblerMechanical Assembly, skids and controls panelsStainless Steel tube bending experience. The tubing sizes are and 3/8 . MUST HAVE EXPERIENCE!Proven ability in the assembly of precision parts, complex mechanisms and special equipment with hand and power tools.Ability to read and interpret blueprints, electrical and process schematics, technical drawings and specifications.Good interpersonal communication skills. Must be English speakingMust be able to lift 40 lbs.Typical responsibilities include:Assembly of electromechanical assemblies and subcomponents, instruments, electrical panels to drawings and proceduresAbility to wire point to point electrical equipmentAbility to bend S.S. Tubing to required dimensionsMinimum 2 years experience in the machine and equipment manufacturing environment, with an emphasis on electro-mechanical assembly, control panels and skids.Hours - 8: 00 a.M. 4: 30 p.M. (Normal), potential for OT (10 hour days, 8 hour Saturdays).Salary - $20.00 $25.00 per hour, dependent on qualifications and experienceStart date ImmediateDuration - Temporary, 8-12 weeksLocation: Pomona, CAJob Type: Full-timePay: $20.00 - $25.00 per hourSchedule:10 hour shift12 hour shift8 hour shift

Position Type: Full-Time Average Hours: 40-50 hours per weekStarting Wage: $33.60 per hour Duties and Responsibilities: Must be able to perform duties with or without reasonable accommodation. • Consistently demonstrate the Mindsets, ALDI Acts Competencies and Professional Skills (M.A.P.) as outlined for the role.• Develops and implements solutions to technical and facility related problems.• Cooperates and interacts effectively through ongoing communication and exchange of information with relevant personnel related to maintenance matters.• Maintains and implements preventative maintenance programs and consults with the warehouse management team regarding maintenance needs, safety concerns and sanitation issues. • Provides input to the warehouse management team regarding changes to improve the operation. • Communicates appropriately with warehouse management, staff and 3rd parties on any maintenance related issues. • Performs general cleaning duties to achieve warehouse appearance standards and safety requirements.• Performs routine maintenance on the warehouse building interior and exterior.• Contacts and schedules vendors and contractors for necessary warehouse building repairs and emergencies that are outside the scope of routine maintenance.• Maintains a schedule of when maintenance has been performed and when next service is due by utilizing an effective personal organization method.• Maintains confidentiality and privacy of company sensitive data.• Assists warehouse management in achieving budgeted goals.• Performs all assigned tasks, accurately, efficiently, and within company policy and procedures. • Follows the ergonomic program according to established procedures.• Operates equipment according to safety guidelines in performance of essential job functions.• Notifies management regarding product quality, safety concerns, and sanitation issues.• Other duties as assigned. Job-specific Competencies: Knowledge/Skills/Abilities • Provides prompt and courteous customer service.• Develops and maintains positive relationships with internal and external parties.• Ability to interpret and apply company policies and procedures.• Excellent verbal and written communications needed.• Gives attention to detail and follows instructions.• Ability to work both independently and within a team environment. Education and Experience: • High School Diploma or equivalent preferred. Physical Requirements: • Frequently required to lift up to 45 pounds at various heights.• Frequently required to sit, stand, bend, reach, grip, push, pull, lift, carry and walk throughout the warehouse. • Continuously work in varying temperatures, hot and cold (including outdoor temperatures and refrigerator/freezer environments).• Ability to safely and properly operate powered industrial equipment. ALDI offers competitive wages and benefits, including:401(k) PlanCompany 401(k) Matching ContributionsEmployee Assistance Program (EAP)PerkSpot National Discount Program In addition, eligible employees are offered:Medical, Prescription, Dental & Vision InsuranceGenerous Vacation Time & 7 Paid HolidaysUp to 6 Weeks Paid Parental Leave at 100% of payUp to 2 Weeks Paid Caregiver Leave at 100% of payShort and Long-Term Disability InsuranceLife, Dependent Life and AD&D InsuranceVoluntary Term Life InsuranceALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

Performs preventative maintenance and repair to ensure proper operation and upkeep of facilities, general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment. Essential Duties and Responsibilities (include but are not limited to the following)1. Performs regularly scheduled preventative maintenance on general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment.2. Performs troubleshooting on equipment breakdown as instructed including disassembly, repair, parts replacement and parts fabrication to minimize equipment downtime.3. Performs general carpentry, painting, electrical, welding, plumbing and HVAC installations as required.4. Installs and repairs DC storage racks as required.5. Maintains and completes various maintenance documents including but not limited to work order requests, preventative maintenance and daily job breakdown summaries, parts requests and parts purchase orders.6. Performs semi-routine duties where some judgment is required. Work is performed under defined and uniform procedures.7. Exhibits reasonable care and operation of powered material handling equipment.8. Maintains the integrity of our Mission, Vision and Values statement while performing daily job duties.Knowledge, Skills and Abilities:1. Strong English, reading and Math skills required.2. Three to five years electrical, mechanical and maintenance related experience is required.3. Strong mechanical, welding, carpentry, plumbing and AC/DC electrical circuitry knowledge through 480, 3-phase required.4. Excellent hand and eye coordination required. Ability to climb and work at high elevations required.5. Ability to interpret blueprints, schematics, utilize basic hand tools and electrical and/or electronic test equipment including volt/ohm meters and amp probes strongly preferred.6. Ability to handle multiple tasks, be detail oriented, meet department standards and perform duties without immediate and constant supervision.7. Previous Computer Maintenance Management System (CMMS) knowledge preferred.8. Previous experience in the repair of powered material handling equipment strongly preferred.9. Ability to perform physical activity at a sustained pace within the Distribution Center environment including walking, bending and lifting a minimum of 60 pounds is required.QualificationPerforms preventative maintenance and repair to ensure proper operation and upkeep of facilities, general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment. Essential Duties and Responsibilities (include but are not limited to the following)1. Performs regularly scheduled preventative maintenance on general electrical and plumbing systems, conveyor systems, electronic sorters, forklifts and various other powered material handling equipment.2. Performs troubleshooting on equipment breakdown as instructed including disassembly, repair, parts replacement and parts fabrication to minimize equipment downtime.3. Performs general carpentry, painting, electrical, welding, plumbing and HVAC installations as required.4. Installs and repairs DC storage racks as required.5. Maintains and completes various maintenance documents including but not limited to work order requests, preventative maintenance and daily job breakdown summaries, parts requests and parts purchase orders.6. Performs semi-routine duties where some judgment is required. Work is performed under defined and uniform procedures.7. Exhibits reasonable care and operation of powered material handling equipment.8. Maintains the integrity of our Mission, Vision and Values statement while performing daily job duties.Knowledge, Skills and Abilities:1. Strong English, reading and Math skills required.2. Three to five years electrical, mechanical and maintenance related experience is required.3. Strong mechanical, welding, carpentry, plumbing and AC/DC electrical circuitry knowledge through 480, 3-phase required.4. Excellent hand and eye coordination required. Ability to climb and work at high elevations required.5. Ability to interpret blueprints, schematics, utilize basic hand tools and electrical and/or electronic test equipment including volt/ohm meters and amp probes strongly preferred.6. Ability to handle multiple tasks, be detail oriented, meet department standards and perform duties without immediate and constant supervision.7. Previous Computer Maintenance Management System (CMMS) knowledge preferred.8. Previous experience in the repair of powered material handling equipment strongly preferred.9. Ability to perform physical activity at a sustained pace within the Distribution Center environment including walking, bending and lifting a minimum of 60 pounds is required.We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws.The actual hourly rate will equal or exceed the required minimum wage applicable to the job location.

The pay range per hour is $31.30 - $35.33Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematicsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or Supply Chain Facility or reach out to Guest Services at 1-800-440-0680 for additional information.

Aircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Sign on bonus eligibleThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221112Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application.MV Transportation is now hiring experienced Mechanics in your area!* Up to $7,500 sign-on bonus for MechanicsDispersed over a 24-month period3 months - $1,0006 months - $1,00012 months - $1,500 18 months - $1,50024 months - $2,500Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition.Tracking transmission repairsRepairing TSB repairsDiagnose transmission that don't meet mileage and provide failure analysisInstall/remove transmissionDiagnose and repair electrical issuesWork on PMI/and bumper to bumper areasMonitor fleet issues to include electric and hybrid fleet Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Four (4) ASE Certifications (must include preventive maintenance, brakes, electrical, and option for air conditioning or Engines H Series test)Must be able to pass a pre-employment drug screen and random drug testing.Starting Pay Rate: $39.10/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

BlueTriton is a leading provider of spring and purified water products - the name behind your favorite bottled water brands. We are proud to offer an extensive portfolio of highly recognizable, responsibly sourced, and sustainably packaged spring water in addition to other quality products and services. Get ready to quench your thirst with exciting possibilities when you join BlueTriton for a fiercely good career doing work that matters.Water might seem simple enough, but there is a lot going on beneath the surface. Working in a factory or warehouse requires rolling up your sleeves to get things done and the tenacity to go the extra mile again and again. We believe the rewards are worth the effort: a business you help shape, a supportive team you learn from, and the chance to have a sustainable impact in which you can truly be proud.Job DescriptionWe are currently seeking an Electromechanical Technician for our manufacturing/bottling facility to maintain, fix, and improve equipment used in bottling and packaging operations.Location: Ontario, CaliforniaCompensation Pay: $38 – $43.05 / hourShift differential applied to applicable hoursBenefits 401(k) matching; dental insurance; flexible spending account; health insurance; life insurance; paid time off and holidays; vision insurance; short-term and long-term disability insurance; career stability and growth!Schedule Second Shift, Monday – Friday, 9:00 PM – 5:30 AM Ability to work holidays and weekends per business needsKey responsibilities include but are not limited to the following:Plan, lead and execute preventative maintenance (PM) according to PM schedule to miBTBize equipment downtimeComplete reactive maintenance on production lines to recover from equipment failures by repairing mechanical, electrical, and structural componentsCreate retrofits and fabrication, complete machine tear down/repair and assembly and work on PLCs, VFDs, and electric motors Conduct creative problem solving to identify and perform equipment improvementsCoach operators and peers on basic maintenance and equipment settingsParticipate in special project work on equipment upgrades or installationsWork with team members and operators to ensure the daily production schedule is metMaintain partnerships with team members and vendors using effective communicationProvide break relief to production operators or team members as neededOperate a forklift as needed to complete dutiesQualificationsKey qualifications include:High school diploma or GED; additional technical training or certifications desired3 or more years of previous maintenance experience in an industrial manufacturing environmentDemonstrated sense of urgency in completing tasks and comfort working in a high-speed production environmentStrong mechanical and electrical skills; PLC experience desiredSolid computer skills, including the use of Word, Excel, OutlookExperience with CMMS or ERP systems needed, SAP experience preferredAbility to work independently or with a team and communicate effectivelySolid problem solving and decision-making skills with the ability to coach othersAble to lift 100 lbs. and pull 120 lbs. as needed while performing workAble to work with an awkward posture for 2 hours or moreWillingness to work holidays and weekends as we are a 24/7 facility operating through most weekends and holidaysAbility to successfully complete an online skills assessment prior to onsite interviewSuccessful completion of a post offer physical, drug screen and background check are requiredBlueTriton Brands, Inc. (“BlueTriton”) is a water and beverage company in North America that produces and distributes a portfolio of brands of spring water, purified water, and other beverages, which include Poland Spring®, Deer Park®, Ozarka®, Ice Mountain®, Zephyrhills®, Arrowhead®, Origin, Saratoga®, AC+ION®, Pure Life®, B’EAU®, and Splash Refresher. BlueTriton also owns and operates ReadyRefresh®, a water and beverage delivery service for homes and offices. Headquartered in Stamford, Connecticut, BlueTriton is a privately held company with operations and distribution primarily in the United States and Canada, employing more than 7,000 employees.BlueTriton manages water resources for long-term sustainability and helps protect more than 20,000 acres of watershed area owned by the company from harm and destruction. The company sources from 56 springs and has 30 production facilities across North America, with some verified to the Alliance for Water Stewardship Standard. BlueTriton is a Water Champion with The Water Council and has committed to be verified under their WAVE program.

Overview: OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with America’s Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At America’s Tire, we commit to growing our employees and routinely promote from within.Part-Time100% On SitePay Starting at $17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at America’s Tire performs the following duties, including but not limited to:• Install new tires and wheels• Perform maintenance on tires, including rotations, balancing, repairs, and cleaning• Rewarding Career Path to Management• Follow safety guidelines and best practices• Participate in hands-on, on-the-job training• Provide a world-class customer service experienceWhat We’re Looking For:• Must have an upbeat outlook• Must be dedicated and reliable• Must be coachable and trainable• Must be able to lift a minimum of 50 lbs.• Must enjoy and excel in a team environment• Must be able to function well in a physically demanding environmentWhat We Offer:America’s Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:• Paid Training• Competitive Pay• Weekly Paychecks• 401(k) Retirement Plan• Employee Referral Bonus• Employee Assistance Program• Educational Assistance Program• Exclusive Employee Discount ProgramAmerica’s Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names America’s Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why America’s Tire At America’s Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at America’s Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first America’s Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, America’s Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first America’s Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.America’s Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make America’s Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.americastire.comAmerica’s Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Fire Installer IVBe part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doThis skilled position involves installing, programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems, Access Control and CCTV Systems as well as other related building system products at customer sites. Including panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testing. Organize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasks. Position involves the programming of fire alarm, security, and access control system panels, but will primarily focus on networked fire alarm systems.How you will do itPerform installation/programming on integrated security and fire alarm systems.Responds to customer service calls in a timely and efficient manner, troubleshoots and repairs as needed.Will be required to participate in after-hours service program.Communicates with central dispatch on current work order status and receives updates on outstanding customer issues.Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manuals.Supervise and inspect the installation of equipment to meet customer and contract specification.Completes necessary certification courses on internal and external products used.Complete and submit all required task-related, activity, productivity, and other documentation in a timely manner.What we look forRequired5+ years documented experience in low voltage electrical systems, including Fire/Life Safety Systems, Access Control, CCTV, and Security Systems.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Experience with hand tools test equipment, multi-meter usage, digital analyzer and commissioning devices.High School Diploma or equivalent required.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrates a prominent level of customer service.Ability to lead & work well with team members.Ability to adhere to, implement, and always follow safety guidelines and procedures.Strong organizational skills, positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Able to obtain and retain any licenses that are required by National, State and Local codes.This role requires a minimum of a Massachusetts Class D Electrical License.Must always comply with safety guidelines.Working knowledge of electronic and digital test equipment.Basic understanding of Network concepts and architectures.Extended knowledge of DOS and Windows.Ability to multi-task and prioritize in a short period of time.PreferredTwo-year Associates Degree in Electronics; Network; Computer Science or related field.NICET level II or ability to obtain in first year.Simplex programming experience highly preferredHIRING HOURLY RANGE: $27-33 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careersJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Auto Damage Trainee – Costa Mesa, CASalary: $28.29 per hour / $57,000 annuallyAccidents can be scary, and our Auto Damage team rises to the occasion to provide unparalleled customer service when our customers need us the most. We’re looking for Auto Damage Trainees in Costa Mesa, CA who are motivated and ready to grow their careers to the next level with GEICO. Flexibility to work in different environments is also key, as our auto damage adjusters may work from their home, a body shop, a virtual estimating center, or even on the road.Our industry-leading, paid training, which includes 3-weeks of required hands-on experience at our Ashburn, VA training facility will teach you the ins and outs of automobile damage adjusting. We will provide the resources and training so you can directly assist our customers after accidents or major disasters. We're looking for those who are equally motivated as they are compassionate. Your unique skillset, along with the latest auto-adjusting tools and tech, will help you.: Inspect and assess vehicle damage caused by all types of accidents Estimate vehicle repair costs and negotiate equitable settlements Partner with other adjusters and supervisors to work with body shops, rental partners, and parts providers.As an Auto Damage Trainee, you’ll be constantly challenged to continue growing your skills and knowledge to better understand our industry, company, and customers. If you want a career with plenty of growth opportunities, let’s talk.Salary:Salary: $28.29 per hour / $57,000 annuallyQualifications & Skills:Valid driver’s license (must meet company underwriting guidelines for at least the past 3 consecutive years) and the ability to maintain applicable state and federal certifications and permitsWillingness to be flexible with primary work location – position may require either remote or in-office workSolid computer, mechanical aptitude, and multi-tasking skillsEffective attention to detail and decision-making skillsAbility to effectively communicate, verbally and in writing, and willingness to expand on these abilitiesMinimum of high school diploma or equivalent, college degree or currently pursuing preferredAnnual Salary$28.29 - $44.17The above annual salary range is a general guideline. Multiple factors are taken into consideration to arrive at the final hourly rate/ annual salary to be offered to the selected candidate. Factors include, but are not limited to, the scope and responsibilities of the role, the selected candidate’s work experience, education and training, the work location as well as market and business considerations.At this time, GEICO will not sponsor a new applicant for employment authorization for this position.Benefits:As an Associate, you’ll enjoy our Total Rewards Program* to help secure your financial future and preserve your health and well-being, including:Premier Medical, Dental and Vision Insurance with no waiting period**Paid Vacation, Sick and Parental Leave401(k) PlanTuition ReimbursementPaid Training and Licensures*Benefits may be different by location. Benefit eligibility requirements vary and may include length of service.**Coverage begins on the date of hire. Must enroll in New Hire Benefits within 30 days of the date of hire for coverage to take effect.The equal employment opportunity policy of the GEICO Companies provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. GEICO hires and promotes individuals solely on the basis of their qualifications for the job to be filled.GEICO reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job, unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and associates. GEICO also provides a work environment in which each associate is able to be productive and work to the best of their ability. We do not condone or tolerate an atmosphere of intimidation or harassment. We expect and require the cooperation of all associates in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all associates and applicants.

A lead designer and manufacturer of Food Machinery for production of foods from around the world is in search for a highly skilled Welder who will be performing a variety of welding processes.Pay: $24.00 - $28.00 per hourHours: 1st shift- 6: 00am - 2: 30pmBenefits: Medical, Dental, Vision, PTO, 401k + Matching and more.Responsibilities:Weld metal parts using MIG, TIG, and Stick techniques.Read blueprints for precise welding requirements.Prepare materials and ensure proper fit-up before welding.Operate welding tools safely and efficiently.Requirements:Minimum 3 years of welding experience.Skilled in MIG, TIG, Flux, and Stick welding.Ability to understand blueprints and welding symbols.Strong attention to detail and dedication to quality.Good hand-eye coordination and manual dexterity.Knowledge of welding safety and equipment care.Physical stamina for diverse work conditions.

Master Aircraft Technician A&Pin GAC Van NuysUnique Skills:This position is hiring for first and second shiftVan NuysThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 8 years Aviation Maintenance experience to include 4 years of experience working on Gulfstream mid/large size aircraft required. Corporate aircraft experience preferred. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Expert Aircraft Technician that works independently and in a leadership role as necessary to perform a variety of aircraft mods and mtc functions. Technical expert on in-service aircraft and perform repairs on installations that require a high degree of accuracy and timeliness. Function independently on a team and in a leadership role when required.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic mtc and necessary servicing of all acft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time . Provide work direction for assigned techs. Promote high standards of quality through instruction and example . Act on behalf of lead in their absence and assume duties and responsibilities (to include leading team meetings) when assigned . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirement . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow SOPs and JSAs when operating GSE. Operate and supervise use of special support equipment in removal and installation of major components . Coordinate movement of aircraft as required. Act as mentor and assist in training new employees in CMPs, maintenance manuals, SRMs, IPC usage, flight test installations, Solumina, RS compliance records, and all maintenance of major components. Sign off OJT records as required. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Participate in SMS, including investigations and participation in Site Safety Council . Assist or lead problem solving initiatives and process implementation. Support Lean activities . Assist in problem solving to establish or correct planning methods for aircraft projects by utilizing standard techniques, procedures, and criteria . Assess strengths and weaknesses of assigned members. Provide diverse learning opportunities . Maintain a current knowledge of industry standards, vendor information, and all other procedures, pubs, and a general knowledge pertaining to product support maintenance . Assist in maintaining work schedules . Maintain current knowledge of warranty and parts programs to ensure proper processes are followed . Identify risk and recommend mitigation options to leadership .Additional Functions: Use material tracking system to create parts demand and charge labor to correct work orders and item numbers. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Implement and apply Lean/CI processes to all areas of responsibility . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. In support of aircraft cert and final phase testing, may include flight tests on aircraft .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221113Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

KEEPING SPECIALIZED AIRCRAFT AIRBORNEThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Overview: OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with America’s Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At America’s Tire, we commit to growing our employees and routinely promote from within.Part-Time100% On SitePay Starting at $17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at America’s Tire performs the following duties, including but not limited to:• Install new tires and wheels• Perform maintenance on tires, including rotations, balancing, repairs, and cleaning• Rewarding Career Path to Management• Follow safety guidelines and best practices• Participate in hands-on, on-the-job training• Provide a world-class customer service experienceWhat We’re Looking For:• Must have an upbeat outlook• Must be dedicated and reliable• Must be coachable and trainable• Must be able to lift a minimum of 50 lbs.• Must enjoy and excel in a team environment• Must be able to function well in a physically demanding environmentWhat We Offer:America’s Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:• Paid Training• Competitive Pay• Weekly Paychecks• 401(k) Retirement Plan• Employee Referral Bonus• Employee Assistance Program• Educational Assistance Program• Exclusive Employee Discount ProgramAmerica’s Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names America’s Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why America’s Tire At America’s Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at America’s Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first America’s Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, America’s Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first America’s Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.America’s Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make America’s Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.americastire.comAmerica’s Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Auto Damage Trainee – Costa Mesa, CASalary: $28.29 per hour / $57,000 annuallyAccidents can be scary, and our Auto Damage team rises to the occasion to provide unparalleled customer service when our customers need us the most. We’re looking for Auto Damage Trainees in Costa Mesa, CA who are motivated and ready to grow their careers to the next level with GEICO. Flexibility to work in different environments is also key, as our auto damage adjusters may work from their home, a body shop, a virtual estimating center, or even on the road.Our industry-leading, paid training, which includes 3-weeks of required hands-on experience at our Ashburn, VA training facility will teach you the ins and outs of automobile damage adjusting. We will provide the resources and training so you can directly assist our customers after accidents or major disasters. We're looking for those who are equally motivated as they are compassionate. Your unique skillset, along with the latest auto-adjusting tools and tech, will help you.: Inspect and assess vehicle damage caused by all types of accidents Estimate vehicle repair costs and negotiate equitable settlements Partner with other adjusters and supervisors to work with body shops, rental partners, and parts providers.As an Auto Damage Trainee, you’ll be constantly challenged to continue growing your skills and knowledge to better understand our industry, company, and customers. If you want a career with plenty of growth opportunities, let’s talk.Salary:Salary: $28.29 per hour / $57,000 annuallyQualifications & Skills:Valid driver’s license (must meet company underwriting guidelines for at least the past 3 consecutive years) and the ability to maintain applicable state and federal certifications and permitsWillingness to be flexible with primary work location – position may require either remote or in-office workSolid computer, mechanical aptitude, and multi-tasking skillsEffective attention to detail and decision-making skillsAbility to effectively communicate, verbally and in writing, and willingness to expand on these abilitiesMinimum of high school diploma or equivalent, college degree or currently pursuing preferredAnnual Salary$28.29 - $44.17The above annual salary range is a general guideline. Multiple factors are taken into consideration to arrive at the final hourly rate/ annual salary to be offered to the selected candidate. Factors include, but are not limited to, the scope and responsibilities of the role, the selected candidate’s work experience, education and training, the work location as well as market and business considerations.At this time, GEICO will not sponsor a new applicant for employment authorization for this position.Benefits:As an Associate, you’ll enjoy our Total Rewards Program* to help secure your financial future and preserve your health and well-being, including:Premier Medical, Dental and Vision Insurance with no waiting period**Paid Vacation, Sick and Parental Leave401(k) PlanTuition ReimbursementPaid Training and Licensures*Benefits may be different by location. Benefit eligibility requirements vary and may include length of service.**Coverage begins on the date of hire. Must enroll in New Hire Benefits within 30 days of the date of hire for coverage to take effect.The equal employment opportunity policy of the GEICO Companies provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability or genetic information, in compliance with applicable federal, state and local law. GEICO hires and promotes individuals solely on the basis of their qualifications for the job to be filled.GEICO reasonably accommodates qualified individuals with disabilities to enable them to receive equal employment opportunity and/or perform the essential functions of the job, unless the accommodation would impose an undue hardship to the Company. This applies to all applicants and associates. GEICO also provides a work environment in which each associate is able to be productive and work to the best of their ability. We do not condone or tolerate an atmosphere of intimidation or harassment. We expect and require the cooperation of all associates in maintaining an atmosphere free from discrimination and harassment with mutual respect by and for all associates and applicants.

Aerospace Precision Metal Company is looking for experienced Quality Control Inspectors. Responsibilities:Collaborate with quality assurance team to update and enhance inspection procedures as needed.Work closely with production, engineering, and quality assurance teams to address quality concerns and implement corrective actions.Participate in cross-functional teams to improve processes and enhance overall product quality.Qualifications:High school diploma or equivalent; additional technical certifications or coursework in quality control is a plus.Proven experience as a quality control inspector in the aerospace or precision metal industry.Skills:Proficient in the use of micrometers, gauges, and other precision measuring instruments.Strong attention to detail and accuracy.Familiarity with aerospace industry standards and specifications.Excellent communication and documentation skills.Shift:Position requires availability for second-shift work.Call our office for more info

Fire Alarm Inspector IBuild your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time Comprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities with outstanding internal resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, Tools, and Equipment to complete all jobsProviding Scheduling and management supportJCI Employee discount programs (The Loop by Perk Spot)Check us Out: A Day in the Life of the Building of the Future https://youtu.be/pdZMNrDJviYWhat you will doInspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Suppression life safety product lines as well as similar competitive manufacturers’ product lines. How you will do itWork with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look forFire alarm license1 to 2 years documented service experience in fire alarm or fire sprinkler Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Able to obtain and retain any licenses that are required by National, State and Local codes.Successful completion of the Inspector Entre Course (Electrical or Sprinkler).Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredSpecial Hazards experienceFire pump experienceService backgroundNICET Level II certificationBackflow LicenseFamiliarity with sprinkler systems and extinguishersHIRING HOURLY RANGE: $18-22 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careersJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Aircraft Technician IIin GAC Van NuysUnique Skills:Multiple shiftsThe compensation range for this role is:$35.19 - $38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221111Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

ENSURING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Overview: OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with America’s Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At America’s Tire, we commit to growing our employees and routinely promote from within.Part-Time100% On SitePay Starting at $17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at America’s Tire performs the following duties, including but not limited to:• Install new tires and wheels• Perform maintenance on tires, including rotations, balancing, repairs, and cleaning• Rewarding Career Path to Management• Follow safety guidelines and best practices• Participate in hands-on, on-the-job training• Provide a world-class customer service experienceWhat We’re Looking For:• Must have an upbeat outlook• Must be dedicated and reliable• Must be coachable and trainable• Must be able to lift a minimum of 50 lbs.• Must enjoy and excel in a team environment• Must be able to function well in a physically demanding environmentWhat We Offer:America’s Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:• Paid Training• Competitive Pay• Weekly Paychecks• 401(k) Retirement Plan• Employee Referral Bonus• Employee Assistance Program• Educational Assistance Program• Exclusive Employee Discount ProgramAmerica’s Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names America’s Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why America’s Tire At America’s Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at America’s Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first America’s Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, America’s Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first America’s Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.America’s Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make America’s Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.americastire.comAmerica’s Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

A leading national designer and manufacturer of custom machinery for production of foods from around the world is looking for a Machinist who will be setting up and operating machine tools and fits and assembles parts to make or repair metal parts, mechanisms, tools or machines. Hours: 1st Shift 6: 00am- 2: 30pmSalary: $22.00 - $28.00 per hourBenefits: Medical, Dental, Vision, 401k + Matching, PTO and more.Duties:Conduct Set up, operate machine tools and fitsEdit programs and write simple programsRepair metal parts, mechanisms, tools and machinesknowledgeable in machine dimensions and tolerance of piecesStudy blue prints, sketches, damaged parts or descriptions of partsMust have both CNC and Manual experienceCall us directly:

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary Paid vacation/holidays/sick time - 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities With outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out: https://youtu.be/pdZMNrDJviYWhat you will do:Under general direction is responsible for the sale of Johnson Controls BE offerings to mechanical contractors, designers and consulting engineers. Promote the Johnson Controls value proposition to construction community by providing business and technical solutions. Builds and manages long term customer relationships/partnerships with assigned accounts. Responsible for customer satisfaction and loyalty while working in conjunction with operations partners. Positions renewable service agreements as a foundation of managed account relationships.Executes the sales process to aid in cultivating and managing long-term relationships and in seeking out, qualifying and closing new sales opportunities. Utilizes sales tools to plan and document sales progress as well as increase business opportunities across all BE-LOBs in assigned accounts. Seeks to expand the depth and breadth of Johnson Controls offerings sold within assigned accounts. Actively participates as a member on select account teams on key and target customer accounts. May lead the account team(market customer leader)on assigned target and key accounts where significant growth opportunities exist and more robust expertise is required from others to solidify the opportunity. Seeks to continually develop sales skills and to enhance knowledge of the JCI product and service offerings.How you will do it:Sells, with minimal supervision, the Johnson Controls offerings persuasively, persistently and confidently to all members of the construction community to include contractors, consultants and designers while reaching optimal profit levels. Focuses on all opportunities to allow the contractor to achieve business objectives. Manages multiple, ongoing, opportunities. Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing assigned customers.Builds partnering relationships with the owner construction community responsible for the decision-making process to drive the sale of Johnson Control offerings. Actively listens, probes and identifies concerns. Understands the customer's business cycle customer base. Demonstrates technical and business expertise and maintains a high level of credibility. Garners loyalty, trust and commitment from the customer.Seeks out, targets and initiates contact with multiple prospective customers in alignment with JCI strategy. Develops and maintains a network of industry contacts. Understands and leverages the sales process outcomes as well as demonstrates evidence of advancing the sell. Shares technical knowledge plus business expertise with the customer to match the solution to the customer’s operational need and favorably position Johnson Controls. Qualifies and assesses potential customers.Addresses customer's operational and environmental objectives, needs and requirements. Recommends solutions and links customer objectives to total value solution and competitive advantage. Differentiates Johnson Controls services and products from competitors by applying creativity, ingenuity, and innovation in a value added sales approach.Positively and credibly influences BE strategies with the construction community. Frequently creates competitive, high quality and timely estimates, proposals, and cost/benefit analysis. Effectively writes, and presents proposals. Negotiates value, addresses resistance and closes the sale. Differentiates Johnson Controls as a total building environment supplier.Utilizes applicable sales tools effectively to plan and document progress as well as increase business opportunity in accounts. Leverages Johnson Controls sales process to close sales quickly. Manages the high activity of the pipeline in the managed system with a focus on sales phase, close date, and probability of a close as well as other pertinent information.Acts as the customer’s advocate in interactions with Johnson Controls to ensure the customer obtains the best value from Johnson Controls offerings. Sets appropriate customer expectations on Johnson Controls offerings. Participates in final project inspection. Ensures that the customer is trained and oriented to system operation and the value of services delivered.What we look for:Bachelor’s degree in business, engineering, or related discipline required. A minimum of six (6) years of successful field sales experience. At least three (3) years successfully selling HVAC or building automation system industry. Demonstrates a commitment to integrity and quality in business. Excellent initiative and interpersonal communications skills. Demonstrated ability to influence the market at key levels.HIRING SALARY RANGE: $65K-$75K annual base salary + target incentive earnings (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role offers a competitive Sales Incentive Plan that will take into account project, quarterly, and annual margin. This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careersJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.