Airworthiness Inspector A&Pin GAC Van NuysUnique Skills:5th shift - Weekend nights: Friday thru Sunday (6PM - 6:30AM). Willing to support Van Nuys and Long Beach locations.The compensation range for this role is: $39.38 to $43.53 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221227Category: Quality AssurancePercentage of Travel: Up to 25%Shift: Weekend NightsEmployment Type: Full-timePosting End Date: 08/02/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Field Service RepresentativeBuild an Aviation Career You're Proud OfBuild your career with integrity by working at a company that doesn't just treat you like a number. You'll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you'll be set up for success.Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency.As a Field Service Representative, you are responsible for Mobile Service Team activities on gas turbine powered aircraft, technical troubleshooting, problem solving, engine changes and engine repairs in the field. The incumbent can be based anywhere in the United States.What you'll do:(Not listed in order of importance. Other duties may be assigned.)Perform inspection, airframe interface, ground operation, troubleshooting, adjustment and repair of engines and related accessories, as installed in customer aircraft per manufacturer's instructions.Accomplish duties in a manner that presents an image of professionalism to the customer and their agents that is the embodiment of service assistance in conforming the results to the manufacturer's approved modification specifications in engines and related accessories.Proficiently perform the attachment of Powerplant "Quick Engine Change" components and installation of the powerplants in the aircraft as well as the installation of propellers, governors, and engine related accessories.Monitor tooling calibrations for any equipment used to perform designated tasks.Perform any appropriate inspection they are certified to perform following completion of engine repairs and modifications and the inspection of powerplants following their installation into the aircraft for final acceptance and release to service.Make airworthiness determinations and providing suitable certification for the work performed including the Final Inspection and "Release to Service" of any work accomplished within the Repair Station's Rating either at the Repair Station or at any other location.Position Requirements:Ability to express or exchange ideas verbally with peers, clients, and public.Ability to get along with co-workers and peers.Maintenance of regular attendance and punctuality within customary tolerances.Looking for maintenance professionals who hold an A&P license with well-developed technical knowledge on any of these specific types and models of TFE731 / PT6A / PW300 / PW500 / JT15D / Spey / Tay / HTF7000 / GTCP 36 APU / BR710 aircraft turbine engines.College degree OR high school graduate with technical vocational training and knowledge normally achieved through graduation from a university, trade school or military aircraft maintenance program, or an equivalent apprenticeship program.Must possess effective written and verbal communications skills.Must have proper hand tools.Must be able to speak, read, and write in the English language.Must have A&P License.Must possess a valid driver's license.Should be able to demonstrate PC proficiency in MS Word and Excel as well as learn any corporate or industry software used by the position.Must be authorized to work in the US.Physical Demands: Active work in field locations, both in hangars and on ramps: exerting up to (50-70) pounds of force occasionally to lift, carry, push, pull or otherwise move objects.Work involves walking, sitting, driving or standing for various periods of time required to work in equipment attached, or to be attached to aircraft.Vision: Near clarity of vision is required for close-up engine and chart/document analysis. Field Service Representatives assume the responsibilities of a QC Inspector and must pass a Jaeger vision chart test at no less than sixteen inches, or equivalent (20/30 vision) with one eye, either natural or corrected.Reaching: extending hands and arms in any direction.Handling: seizing, holding, grasping, turning, or otherwise working with hand(s). Fingers are involved to the extent that they are an extension of the hand, such as to turn a switch or shift gears such as picking, pinching, or otherwise working primarily with fingers rather than with the whole hand or arm as in handling.Talking: expressing or exchanging ideas by means of the spoken word to impart oral information to convey detailed spoken instruction to other workers, customers, or agents accurately, loudly, or quickly.Hearing: effectively perceiving the nature of sounds by ear.Work Environment:(The work environment characteristics described here are representative of those employee encounters while performing the essential functions of this job.)Environment may include periods of elevated noise exposure due to engine testing.Frequent exposure to outside weather conditions.Must be able to travel between 70-90 % of the time.May be required to travel to locations outside of the United StatesHangars, ramps, and engine shop environments, including hoists, heavy parts, chemicals, and fluids with use of precision instruments, stringent housekeeping and work area safety regulations and practices to observe and maintain.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesSalary: $35-55 per hour based on experienceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardStandardAero offers equal employment opportunities for all. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application.MV Transportation is now hiring experienced Mechanics in your area!* Up to $7,500 sign-on bonus for MechanicsDispersed over a 24-month period3 months - $1,0006 months - $1,00012 months - $1,500 18 months - $1,50024 months - $2,500Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition.Tracking transmission repairsRepairing TSB repairsDiagnose transmission that don't meet mileage and provide failure analysisInstall/remove transmissionDiagnose and repair electrical issuesWork on PMI/and bumper to bumper areasMonitor fleet issues to include electric and hybrid fleet Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Four (4) ASE Certifications (must include preventive maintenance, brakes, electrical, and option for air conditioning or Engines H Series test)Must be able to pass a pre-employment drug screen and random drug testing.Starting Pay Rate: $39.10/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

FM2, Lee Company’s facility maintenance and management team is looking for experienced Commercial/Industrial HVAC Technicians.Our HVAC Technicians install, repair, and maintain a variety of equipment for industrial and commercial customers including, refrigeration, air conditioning, electric motors, heating units, heat pumps, hermetic compressors, light commercial furnaces, boilers, burners, intake and exhaust fans, economizers, humidifiers, capacity controls, semi-hermetic compressors, split systems, flame safeguard controls, air compressors, air driers, chillers, and packaged units.Qualifications:5+ years of commercial and/or industrial HVAC experienceEPA certificationValid driver’s licenseAt Lee Company, you will be among the most knowledgeable and experienced HVAC experts in the country. We offer site-based positions along with competitive pay, full benefits, paid training, and opportunities for growth. If you have a desire to serve and a passion for excellence, apply today!Company Perks & Benefits:Our mission at Lee Company is to create an environment where our employees can thrive, and we mean that. Wellness involves your relationships, finances, career, community, as well as physical health. We don’t just talk the talk, we walk the walk. Check out what benefit programs we offer to help our team and family members THRIVE with us!We pay 100% of every employee’s long-term disability, life insurance, and fees associated with acquiring and maintaining a trade licenseWe offer free trade training and license exam preparation through Lee Company University (LCU), our very own NCCER accredited trade schoolWe have a company match program for 401(k) and health savings account contributionsYou earn paid time off and paid holidays for your personal well-beingYou earn rewards for your commitment to wellness and participation in initiatives through our rewards programWe offer meaningful assistance programs like Chaplain services, an on-site / mobile clinic, and an emergency assistance fundWe connect you to opportunities to make an impact through volunteering in our communitiesAnd other benefits such as health insurance, dental, vision, and short-term disabilityLee Company is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate on the basis of race, color, religion, gender, age, national origin, veteran status, disability, genetic information or testing, or family and medical leave.

Hawx Pest Control Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Pest Control Service Professional. We welcome candidates from other hard-working, blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! You will inspect and perform pest control treatments for residential and commercial customers using high-quality and environmentally-responsible products. You will exemplify excellent customer service and professionalism while following a daily schedule of services.DETAILS Full-time position$16 - $20 per hourUp to $4,000 sign on bonus for licensed candidates Responsibilities Enter/exit structures, crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders.Must deliver premier customer service to resolve pest issues.Read and interpret pesticide labels to correctly mix products based on areas measured and quantities needed.Record work activities and complete all paperwork after finishing services.Perform residential pest management service routes with the highest level of customer service, professionalism, and efficiency.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, identify/eliminate conducive conditions and perform proper treatments. Maintain and care for company equipment, vehicle and gas card and other job-related items. Address and alleviate customer concerns and pest related issues by using integrated pest management strategies Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and energizes people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with team members from different departments. Emotionally Intelligent, Strong Communicator: Effectively conveys ideas and information in a way that is suited to different audiences and personalities. Actively listens to team members and incorporates feedback and insights gained from others. SKILLS Tech Literate: Proficient with commonly used documents and software (word processing, spreadsheets, etc.) and capable of learning new software in a fast-paced environment. Familiarity with Google Workspace tools is a plus.Problem-solver: Prioritizes understanding the problem over chasing new solutions. Pays close attention to the details and has a keen sense for what's not working and how it can be improved.Operational Efficiency: Understands operational processes and workflow optimization strategies to enhance productivity and efficiency.Cross-Functional Collaboration: Collaborates with different departments to align operational processes and ensure seamless coordination with all stakeholders.Task Management: Utilizes task management software (Asana) to organize, track, prioritize, and complete routine tasks.Organization and Time Management: Able to prioritize tasks while staying on top of multiple workflows in process and to achieve those tasks on time and on target. EXPERIENCE & OTHER REQUIREMENTS Must pass required background check and drug screening and motor vehicle record.Must be 21 years or older w/ valid driver's license Works well in the presence of all pests Physical labor experience (working in outside conditions) Ability to bend, lift, sit, stretch, reach, crouchAble to lift at least 50 pounds Benefits Medical, dental, vision, life insurance 401K with company matchPTO and Paid HolidaysEmployee Assistance Program (EAP)Short and Long Term Disability Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. Compensation:$23.00 - $28.00/hrWhat you’ll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns.Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership.QualificationsWhat we’re looking for:High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Valid driver’s license and a safe driving record are required. Knowledgeable in maintenance equipment.Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment test to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Description The Commercial and International Group at Leidos currently has an opening for a System Installation Technician – Ports and Borders Systems to work at Ports of Entry globally. This is an exciting position where you can use your experience installing and upgrading Non-Intrusive Inspection (NII) systems for the US Department of Homeland Security and other like governments entities. Our mission is to travel to the customer site (generally a Port of Entry) and perform installation and testing of NII Leidos products. You must be team oriented and flexible, and actively seek to share information and assist one’s peers. Expect 100% weekly travel; primarily domestic, future international travel can be expected. Must be flexible to work days and nights. Possesses excellent communication skills, both oral and written. Demonstrates strong electronic repair troubleshooting methodology and maintains an expert technical level of product knowledge after training. Be ethical and professional, act with integrity.Primary Responsibilities:Installs and commissions Mid-Energy Portals (MEP) and Low Energy Portals (LEP), IP6500 Vehicle and Cargo Inspection Systems (VACIS) and Exploranium, Radiation Portal Monitor (RPM) systems.Traveling to customer sites to perform installation, troubleshooting and repair of complex equipment and systems.Performs a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer locations.Support Engineering activities during Factory Acceptance testing.Support Manufacturing activities when not on travel.Ensures that tools and test equipment are properly maintained and calibrated.Supporting Customers during Site Acceptance Testing.Executing all task assigned by the team leader or manager diligently and on schedule.Working with team members to achieve success during installations of equipment and systems.Isolating equipment start-up malfunctions and taking corrective action.Performing ad-hoc and predetermined work assignments with instructions.May be called upon to work on equipment that has little or no documentation or training.Following all established guidelines, procedures, and policies.Assesses product/equipment performance based on experience and support data; recommends modifications or improvements to equipment, documentation, and operating processes.Travel, overtime and work hours other than Monday-Friday may be required.Willing to work on challenging international projects for short durations.Work well with peers from various backgrounds to build effective work relationships.Basic Qualifications:Current U.S. Citizen with valid U.S. Passport in hand by hire date.HS degree or equivalent.2+ years’ experience in field or installation service environmentsMust pass criminal background check, drug test and extensive credit checkPhysically able to get in narrow spaces, climb ladders / stairs, and carry 50+ lbs. without assistance. Job requires frequent bending, stooping, twisting, turning, and working in unusual positions requiring full body mobility.Must have a valid U.S. Driver’s License with Real ID.Preferred Qualifications:Related Trade experience (electrical, mechanical)/ Military Training in electrical/electronic and mechanical systems. (Equivalence achieved through comparative work and life experience of 2 years of electrical or mechanical field service experience).Minimum of 2 years’ experience directly involved in troubleshooting and repair of Field electrical and electronic systems and equipment.Prior knowledge of X-ray equipment and systems a plus.Individuals shall possess excellent communications skills and have a strong orientation for teamwork. Must be willing and able to travel on short notice.Must be able to work safely and follow safety precautions in extreme environments (temperature, humidity, noise, confined spaces, etc.) around dangerous industrial equipment.Ability to interpret electrical drawings and schematics.Able to lift 50 lbs.75% Travel required.Network installation and configuration is a plusPLC experience is a plusPrevious field electrical assembly experienceSoftware integration with electric/mechanical equipment.Work Environment:Work environment is typically considered to be off-site, wherever the customer of concern is located. Installation will typically be rendered at Ports of Entry (Land Border Crossings or Maritime Ports) or other locations as required. Typical travel requirement is up to 100%.Original Posting Date:2024-07-28While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $44,850.00 - $81,075.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Position Type: Full-Time Average Hours: 40-50 hours per weekStarting Wage: $33.60 per hour Duties and Responsibilities: Must be able to perform duties with or without reasonable accommodation. • Consistently demonstrate the Mindsets, ALDI Acts Competencies and Professional Skills (M.A.P.) as outlined for the role.• Develops and implements solutions to technical and facility related problems.• Cooperates and interacts effectively through ongoing communication and exchange of information with relevant personnel related to maintenance matters.• Maintains and implements preventative maintenance programs and consults with the warehouse management team regarding maintenance needs, safety concerns and sanitation issues. • Provides input to the warehouse management team regarding changes to improve the operation. • Communicates appropriately with warehouse management, staff and 3rd parties on any maintenance related issues. • Performs general cleaning duties to achieve warehouse appearance standards and safety requirements.• Performs routine maintenance on the warehouse building interior and exterior.• Contacts and schedules vendors and contractors for necessary warehouse building repairs and emergencies that are outside the scope of routine maintenance.• Maintains a schedule of when maintenance has been performed and when next service is due by utilizing an effective personal organization method.• Maintains confidentiality and privacy of company sensitive data.• Assists warehouse management in achieving budgeted goals.• Performs all assigned tasks, accurately, efficiently, and within company policy and procedures. • Follows the ergonomic program according to established procedures.• Operates equipment according to safety guidelines in performance of essential job functions.• Notifies management regarding product quality, safety concerns, and sanitation issues.• Other duties as assigned. Job-specific Competencies: Knowledge/Skills/Abilities • Provides prompt and courteous customer service.• Develops and maintains positive relationships with internal and external parties.• Ability to interpret and apply company policies and procedures.• Excellent verbal and written communications needed.• Gives attention to detail and follows instructions.• Ability to work both independently and within a team environment. Education and Experience: • High School Diploma or equivalent preferred. Physical Requirements: • Frequently required to lift up to 45 pounds at various heights.• Frequently required to sit, stand, bend, reach, grip, push, pull, lift, carry and walk throughout the warehouse. • Continuously work in varying temperatures, hot and cold (including outdoor temperatures and refrigerator/freezer environments).• Ability to safely and properly operate powered industrial equipment. ALDI offers competitive wages and benefits, including:401(k) PlanCompany 401(k) Matching ContributionsEmployee Assistance Program (EAP)PerkSpot National Discount Program In addition, eligible employees are offered:Medical, Prescription, Dental & Vision InsuranceGenerous Vacation Time & 7 Paid HolidaysUp to 6 Weeks Paid Parental Leave at 100% of payUp to 2 Weeks Paid Caregiver Leave at 100% of payShort and Long-Term Disability InsuranceLife, Dependent Life and AD&D InsuranceVoluntary Term Life InsuranceALDI is committed to equal opportunity for all employees and applicants. As a proud Equal Opportunity Employer (EOE), we do not discriminate based on race, color, national origin, ancestry, citizenship status, religion, sex, sexual stereotyping, sexual orientation, gender, gender identity, gender expression, age, marital status, mental or physical disability, medical condition, genetic information, military or veteran status, pregnancy (which includes pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), or any other protected characteristic. Employment may be contingent upon ALDI's receipt of an acceptable and job-related drug test, motor vehicle report, and/or reference check, as applicable and permissible by law.

Promotes workplace efficiency and profitability through the maintenance, inspection and repair of facility, equipment and machinery. Do you love. . . ensuring efficiency by maintaining the quality of equipment and machinery Are you energized. . . by sharing your expertise to help others problem solve Do you enjoy. . . working as a team to accomplish a common goal **Hiring for:Tuesday - Saturday, 5:00PM - 1:30AM**Start of pay range is $23.15 + $2.00 shift premium for Weekend ShiftACCOUNTABILITIESEFFECTIVE INSPECTION AND REPAIR OF EQUIPMENTDaily inspection and repair of all conveyor systems and strappersRoutine inspection, preventative maintenance and maintenance of air compressors, compactors, boilers and cardboard conveyorRegular maintenance and repair on all housekeeping, power and material handling equipmentPerform inspection and repair of fire protection equipmentQUALITY MAINTENANCE AND UPKEEP OF FACILITYPerform minor electrical/plumbing repairs, painting and office furniture movesRoutine maintenance of heating and air conditioning unitsMaintain lighting throughout the facilitySort/stack/load pallets, cardboard, aluminum, steel and light bulbs for recyclingSet up/take down meeting roomsUpkeep of yard area, fence repair, snow removal/saltingEFFECTIVELY COMMUNICATE WITH TEAM MEMBERS AND OUTSIDE VENDORS TO ACHIEVE A COMMON GOALAssist outside contractors to perform various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesQUALIFICATIONSREQUIREDBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentComply with all MSDS standards and lock out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning/disinfecting solutions, oil and equipment according to MSDS procedureAdhere to company policies and proceduresBasic math and reading skills and legible handwritingAbility to work as part of a team and interact effectively with othersAbility to perform tasks consistently and accuratelyRegular attendanceSPECIAL REQUIREMENTSPhysical activity may include time standing/walking up to eight hours with scheduled breaks. Ability to work in a multi-level environment, including climbing stairs, bending, twisting, stepping, stooping, reaching, lifting and pushing on a frequent basisAbility to lift up to 60 pounds on a frequent basis and 100 pounds on occasion with assistanceMay be required to take a drug screenPay Range: $0.00 -Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

Airworthiness Inspector Sr A&Pin GAC Van NuysUnique Skills:4th Shift - Friday thru Sunday. Must be willing to support aircraft on road trips and at other sites. Able to work in an extremely fast paced environment. Must be Proficient with Computers and tablets.The compensation range for this role is: $44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221228Category: Quality AssurancePercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 08/02/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring an experienced Mechanic Level A!Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.Must be able to obtain CDL Class B w/ Passenger and Airbrake endorsements.Starting Pay Rate: $38.98/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Hawx Pest Control Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Pest Control Service Professional. We welcome candidates from other hard-working, blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! You will inspect and perform pest control treatments for residential and commercial customers using high-quality and environmentally-responsible products. You will exemplify excellent customer service and professionalism while following a daily schedule of services.DETAILS Full-time position$16 - $20 per hourUp to $4,000 sign on bonus for licensed candidates Responsibilities Enter/exit structures, crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders.Must deliver premier customer service to resolve pest issues.Read and interpret pesticide labels to correctly mix products based on areas measured and quantities needed.Record work activities and complete all paperwork after finishing services.Perform residential pest management service routes with the highest level of customer service, professionalism, and efficiency.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, identify/eliminate conducive conditions and perform proper treatments. Maintain and care for company equipment, vehicle and gas card and other job-related items. Address and alleviate customer concerns and pest related issues by using integrated pest management strategies Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and energizes people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with team members from different departments. Emotionally Intelligent, Strong Communicator: Effectively conveys ideas and information in a way that is suited to different audiences and personalities. Actively listens to team members and incorporates feedback and insights gained from others. SKILLS Tech Literate: Proficient with commonly used documents and software (word processing, spreadsheets, etc.) and capable of learning new software in a fast-paced environment. Familiarity with Google Workspace tools is a plus.Problem-solver: Prioritizes understanding the problem over chasing new solutions. Pays close attention to the details and has a keen sense for what's not working and how it can be improved.Operational Efficiency: Understands operational processes and workflow optimization strategies to enhance productivity and efficiency.Cross-Functional Collaboration: Collaborates with different departments to align operational processes and ensure seamless coordination with all stakeholders.Task Management: Utilizes task management software (Asana) to organize, track, prioritize, and complete routine tasks.Organization and Time Management: Able to prioritize tasks while staying on top of multiple workflows in process and to achieve those tasks on time and on target. EXPERIENCE & OTHER REQUIREMENTS Must pass required background check and drug screening and motor vehicle record.Must be 21 years or older w/ valid driver's license Works well in the presence of all pests Physical labor experience (working in outside conditions) Ability to bend, lift, sit, stretch, reach, crouchAble to lift at least 50 pounds Benefits Medical, dental, vision, life insurance 401K with company matchPTO and Paid HolidaysEmployee Assistance Program (EAP)Short and Long Term Disability Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Description Leidos has an immediate opening for a Mechanical Engineering Lead to join our team in Huntsville, Alabama or San Diego, CA. As a Mechanical Engineering Lead in Leidos, you will lead a Mechanical Engineering team designing the hardware and tooling for Space-based products. This role offers a unique opportunity to impact Leidos’ current/future Space-based sensor projects using your engineering leadership and mechanical design expertise, working to lead your team closely with the product development and validation teams on finite element analysis (FEA) design by providing mechanical simulation support for current hardware virtual machines (HVM) and advanced hardware development technologies/techniques. As the Mechanical Engineer Lead, you will oversee the development of project designs, develop, and decompose specifications, and understand the design system models. This role requires the development of designs in Solid Works, mechanical Finite Element Analysis (FEA) models (preferably using ANSYS Parametric Design Language, APDL), maintaining APDL macros/workflows, establishing FEA methodologies for test correlation, material characterization, and performing stress/mechanical analysis for board package designs and failure prediction. Primary ResponsibilitiesManage the Mechanical Engineering Team for our space payload development team with the following responsibilities:Design components to facilitate the necessary structure for our space-based designs while ensuring functionality from an environmental perspective from fabrication to operation (vibe, shock, temp, vacuum, including shipping, launch, and in orbit, etc.). Work with our team to make sure all requirements are met (including manufacturability, cost, and schedule).Understand the complete mechanical design from overall system level to individual piece parts, as well as tolerance stack-ups.Complete mechanical design reviews successfully.Perform and provide mechanical analysis of designs (including tolerance and environmental stack-ups), facilitating Monte Carlo analysis to verify the design's capability across manufacturing tolerances and operational conditions.Generate requirements for hardware test plans.Build prototypes, analyze failures, and transition successful prototypes into production.Work with manufacturing engineering to break down large, complex assemblies into logical subassemblies and sub-processes based on manufacturing capabilities, cost, and product requirements.Develop agreed-upon project schedules and priorities with the project and engineering management leads and scheduleprojects/resources to meet deadlines.Perform project management related tasks and communication, including reviewing and managing engineering project progress regularly.Produce regular progress reports and documentation by project Engineering Manager / Technical Lead.Provide technical leadership to less experienced engineers and technicians and contribute to the success of a collaborative team.Identify and communicate any engineering constraints/issues to project Engineering Manager / Technical Lead.Confer with engineering staff and other personnel to identify and resolve problems with the design or implementation.Coordinate design components with a multi-disciplinary as required for specific modifications and new development.Actively participate in developing business growth and discriminators consisting of:Support business development activity, including client interface, proposal preparation, industry research, and team building.Support efforts in proposal development, project scoping as well as with client relationship development.Provide and coordinate timely responses for project RFIs (Requests for Information) and project-related submittals.Work independently to evaluate, select, and apply standard engineering techniques, workflow, and procedures, using judgment in making adaptations and modifications to Engineering designs.Additional Mechanical Engineering responsibilities include:Produce mechanical engineering scheme drawings and layouts for evaluation against customer specifications.Understand the fundamentals of silicon, package, and board-level interconnect technologies.Attend regular project and design reviews and provide feedback on timings and completion of work to the projects team.Identify and highlight areas where additional support may be required to ensure timely and accurate completion of work.Provide engineering support during manufacture.Basic QualificationsWe’re looking for Mechanical Engineering (ME) possessing the basic ME foundations such as:Bachelor’s degree 12-15 years of work experience.5+ years of mechanical engineering work experience including 3+ years of work experience in mechanical FEA analysis.2+ years of experience leading a mechanical engineering team.Awareness of modern digital engineering design processes such as Agile and SecDevOps and how that can be applied to mechanical engineering design and development techniques.Experience and high proficiency with GD&T and performing tolerance stack up analysis.Capable of utilizing advanced Finite Element Analysis (FEA) techniques (sub-modeling approach, contact analysis, non-linear analysis), and test procedures for material characterization/testing Warpage/Stress analysis, Solder joint reliability (SJR) prediction, and board assembly process simulation analysis.Complete stress analysis (FEA), design risk assessments (DRA), and failure modes and effects analysis (FMEA).Identify complex technical issues and provide necessary solutions to eliminate root causes.Must possess the ability to understand new concepts quickly; apply them accurately; organize, schedule, and coordinate work phases and determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.Demonstrated ability to integrate and deliver hardware in a resource-constrained environment creatively.Demonstrated in-kind or direct team leadership skills, with backing examples.Assist in the development of cost estimates for infrastructure mechanical systems.Familiar and having experience with US DoD Contract Data Requirements List (CDRLs) and mechanical-related documentation as required by US DoD Data Item Descriptions.Demonstrated proficiency with CAD based software such as SolidWorks, Simulink, etc.Possess strong and fluent communication, project focus, and execution skills.US Citizen with the ability to obtain Secret clearancePreferred QualificationsExperience (+5 yrs) with space products (space vehicle or payload) design, manufacturing, or support that includes broad demonstrated experience in electrical, mechanical, software, and manufacturing engineering including product design, validation, test, troubleshooting, repair, and support evaluating unique space environment-induced designs through low power and stress calculations and for cost-effectiveness and ease of manufacture and maintenance.Experience with managing mechanical engineers and technicians.Experience with mechanical engineering design and development process and workflow.Experience working cross-functional teams for project-wide collaboration.Space Mechanical Systems familiarity.2+ years of experience in ANSYS (APDL/Workbench).US Citizen with current TS/SCI clearanceUp-to-date Project Management Professional (PMP) Certification.Original Posting Date:2024-07-25While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range -The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys - Day ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221061Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.Pay Rate: $18.72What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.Starting pay rate: $18.72/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Hawx Pest Control Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Pest Control Service Professional. We welcome candidates from other hard-working, blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! You will inspect and perform pest control treatments for residential and commercial customers using high-quality and environmentally-responsible products. You will exemplify excellent customer service and professionalism while following a daily schedule of services.DETAILS Full-time position$16 - $20 per hourUp to $4,000 sign on bonus for licensed candidates Responsibilities Enter/exit structures, crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders.Must deliver premier customer service to resolve pest issues.Read and interpret pesticide labels to correctly mix products based on areas measured and quantities needed.Record work activities and complete all paperwork after finishing services.Perform residential pest management service routes with the highest level of customer service, professionalism, and efficiency.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, identify/eliminate conducive conditions and perform proper treatments. Maintain and care for company equipment, vehicle and gas card and other job-related items. Address and alleviate customer concerns and pest related issues by using integrated pest management strategies Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and energizes people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with team members from different departments. Emotionally Intelligent, Strong Communicator: Effectively conveys ideas and information in a way that is suited to different audiences and personalities. Actively listens to team members and incorporates feedback and insights gained from others. SKILLS Tech Literate: Proficient with commonly used documents and software (word processing, spreadsheets, etc.) and capable of learning new software in a fast-paced environment. Familiarity with Google Workspace tools is a plus.Problem-solver: Prioritizes understanding the problem over chasing new solutions. Pays close attention to the details and has a keen sense for what's not working and how it can be improved.Operational Efficiency: Understands operational processes and workflow optimization strategies to enhance productivity and efficiency.Cross-Functional Collaboration: Collaborates with different departments to align operational processes and ensure seamless coordination with all stakeholders.Task Management: Utilizes task management software (Asana) to organize, track, prioritize, and complete routine tasks.Organization and Time Management: Able to prioritize tasks while staying on top of multiple workflows in process and to achieve those tasks on time and on target. EXPERIENCE & OTHER REQUIREMENTS Must pass required background check and drug screening and motor vehicle record.Must be 21 years or older w/ valid driver's license Works well in the presence of all pests Physical labor experience (working in outside conditions) Ability to bend, lift, sit, stretch, reach, crouchAble to lift at least 50 pounds Benefits Medical, dental, vision, life insurance 401K with company matchPTO and Paid HolidaysEmployee Assistance Program (EAP)Short and Long Term Disability Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Description Are you innovative, versatile, and resourceful Do enjoy the rush of working on concept design, analysis, detailed design, prototype development, lab testing, and field testing If so we are looking for you, our next Mechanical Engineer to work in San Diego, CA, as part of a small team to interface with Customers and End Users to tackle their most stressing multidiscipline design challenges.Be an integral part of an energetic, highly-engaged small team where there are many overlapping roles and opportunities for cross-over skillsets to develop and contribute across a range of technologies. We know you’ll take great pride in applying theory and technical creativity to rapidly develop impactful solutions.Primary Responsibilities- Perform CAD manipulation, finite element mesh development, - CAD surfacing, manipulation, and meshing of geometries for use in analytical codes- Work with all aspects of the Electromagnetic (EM) Low Observables (LO) design cycle; from concept design, requirements definition, multidiscipline trade studies and analysis, to detailed engineering design, up to prototype fabrication and testing- Provide direct engineering support for customers and end-usersBasic Qualifications- Bachelor's Degree in Science and/or Engineering with 8+ years of related experience or Master's with 6+ years of related experience.- Must be a U.S Citizen- Must have a Secret Security Clearance and the ability to obtain a Top Secret Security Clearance- Must have excellent computer skills, with experience using SolidWorks or Ansys.- Experience with all aspects of the design cycle; from concept design, requirements definition, multidiscipline trade studies and analysis, to detailed engineering design, up to prototype fabrication and testing- Must be proficient with basic hand and shop tools for the purpose of test article preparation and/or prototype development- Must possess excellent oral and written communication skills- Must have the ability to work independently as well as with a team- Must have excellent problem solving skills, and must be meticulous, organized, responsible, and self-motivated with a can-do attitude- Must thrive in fast-paced environmentPreferred Qualifications- Background in Physics, Mathematics, and/or Electrical Engineering. Advanced degree is a plus- Working knowledge of composite materials, Additive Manufacturing, adhesives, coatings, etc.- Programming experience, C/C++, Visual Basic. Aptitude and desire to perform programming for the purpose of data manipulation and processing- Proficiency in Geometry, Trigonometry, and Linear Algebra- Familiarity with computational electromagnetic (CEM) methodology- Experience with MS OfficeLInCOriginal Posting Date:2024-07-17While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $101,400.00 - $183,300.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys - Day ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221061Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: We are seeking a Master AutomotiveMechanicwhowill perform all needed maintenance and repairs on all fleet vehicles. TheMechanicis required to perform all other duties as required and needed. Experience working with Chevy models and Ford vehicles preferred.We Offer:Excellent pay rate 40 hours a week, not flat rateOT as needed over 40 hoursPaid vacationCompany provided uniform401K plan availableBenefits: Medical, Vision and DentalCorporate partner discount programAbility to advance through a national companyResponsibilities:Perform preventive maintenance inspections and repairs.Assist and repair Drivers concerns on vehicles.Air Conditioning diagnosis and repair.To perform electrical diagnosis and repairs.Perform diagnosis, service and repairs on heating and air conditioning systems.Perform fluid and filter changes on Engine, Transmission, Differential, Cooling system, etc.Perform vehicle computer diagnostics, using computer scanners and digital volt ohm meters.Perform major engine components diagnosis and replacement, i.e. cylinder head, exhaust manifold, intake manifold, cam shafts etc.Write repair orders legibly with detailed repair information. Qualifications: Talent Requirements:Ford and/or GM experience a must. (light to medium duty vehicles)Must display initiative, professionalism, candor and tactat all times.Must be self-motivated and able to perform with minimal to no supervision.This position is considered safety sensitive.The Technician must become ASE Certified in the approved category(s), requirement to obtain ASE certification.Minimum three (3) to five (5) years verifiable hands-on shop experience.Automotive diagnostic experience a must.Must have own tools for this class of Technician.Experience with CNG fuel systems helpful.Able to lift 70 pounds.Can work varied schedule: days, evenings and/or weekends.Starting pay rate: $45/hourMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#CB#appcast

Hawx Pest Control Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Pest Control Service Professional. We welcome candidates from other hard-working, blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! You will inspect and perform pest control treatments for residential and commercial customers using high-quality and environmentally-responsible products. You will exemplify excellent customer service and professionalism while following a daily schedule of services.DETAILS Full-time position$16 - $20 per hourUp to $4,000 sign on bonus for licensed candidates Responsibilities Enter/exit structures, crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders.Must deliver premier customer service to resolve pest issues.Read and interpret pesticide labels to correctly mix products based on areas measured and quantities needed.Record work activities and complete all paperwork after finishing services.Perform residential pest management service routes with the highest level of customer service, professionalism, and efficiency.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, identify/eliminate conducive conditions and perform proper treatments. Maintain and care for company equipment, vehicle and gas card and other job-related items. Address and alleviate customer concerns and pest related issues by using integrated pest management strategies Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and energizes people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with team members from different departments. Emotionally Intelligent, Strong Communicator: Effectively conveys ideas and information in a way that is suited to different audiences and personalities. Actively listens to team members and incorporates feedback and insights gained from others. SKILLS Tech Literate: Proficient with commonly used documents and software (word processing, spreadsheets, etc.) and capable of learning new software in a fast-paced environment. Familiarity with Google Workspace tools is a plus.Problem-solver: Prioritizes understanding the problem over chasing new solutions. Pays close attention to the details and has a keen sense for what's not working and how it can be improved.Operational Efficiency: Understands operational processes and workflow optimization strategies to enhance productivity and efficiency.Cross-Functional Collaboration: Collaborates with different departments to align operational processes and ensure seamless coordination with all stakeholders.Task Management: Utilizes task management software (Asana) to organize, track, prioritize, and complete routine tasks.Organization and Time Management: Able to prioritize tasks while staying on top of multiple workflows in process and to achieve those tasks on time and on target. EXPERIENCE & OTHER REQUIREMENTS Must pass required background check and drug screening and motor vehicle record.Must be 21 years or older w/ valid driver's license Works well in the presence of all pests Physical labor experience (working in outside conditions) Ability to bend, lift, sit, stretch, reach, crouchAble to lift at least 50 pounds Benefits Medical, dental, vision, life insurance 401K with company matchPTO and Paid HolidaysEmployee Assistance Program (EAP)Short and Long Term Disability Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys - Day ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221061Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking a Fleet Maintenance Manager who will be a dynamic, multi-task oriented senior professional to manage all day-to-day maintenance aspects of this fixed route bus operation. The Fleet Maintenance Manager willensurethat all contractual requirements are achieved, and duties included will consist of daily, weekly, monthly and annual reports. The Fleet Maintenance Manager must be able to properly manage a budget for maintenance program. Qualifications: Talent Requirements:Must have at least three (3) or more years of recent (within the last five (5) years) and relevant experience managing the maintenance functions of a transit bus maintenance shop similar in scope, size, and complexity and with same or similar type of transit vehicles/equipment.Must have experience managing/ directing 10 plus employees (fleet Technicians/Service Workers/Cleaners).Experience working with 50 + buses within the last year.Previous passenger transportation in current project or similar environment preferred.Must be able to manage and interface with client.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft outlook.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.ASE or manufacture’s certifications a plus.Technical experience with fixed route transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.Must have a CDL class B with passenger and airbrake endorsement.Starting salary range: $99,000 - $122,000MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Hawx Pest Control Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Pest Control Service Professional. We welcome candidates from other hard-working, blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! You will inspect and perform pest control treatments for residential and commercial customers using high-quality and environmentally-responsible products. You will exemplify excellent customer service and professionalism while following a daily schedule of services.DETAILS Full-time position$16 - $20 per hourUp to $4,000 sign on bonus for licensed candidates Responsibilities Enter/exit structures, crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders.Must deliver premier customer service to resolve pest issues.Read and interpret pesticide labels to correctly mix products based on areas measured and quantities needed.Record work activities and complete all paperwork after finishing services.Perform residential pest management service routes with the highest level of customer service, professionalism, and efficiency.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, identify/eliminate conducive conditions and perform proper treatments. Maintain and care for company equipment, vehicle and gas card and other job-related items. Address and alleviate customer concerns and pest related issues by using integrated pest management strategies Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and energizes people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with team members from different departments. Emotionally Intelligent, Strong Communicator: Effectively conveys ideas and information in a way that is suited to different audiences and personalities. Actively listens to team members and incorporates feedback and insights gained from others. SKILLS Tech Literate: Proficient with commonly used documents and software (word processing, spreadsheets, etc.) and capable of learning new software in a fast-paced environment. Familiarity with Google Workspace tools is a plus.Problem-solver: Prioritizes understanding the problem over chasing new solutions. Pays close attention to the details and has a keen sense for what's not working and how it can be improved.Operational Efficiency: Understands operational processes and workflow optimization strategies to enhance productivity and efficiency.Cross-Functional Collaboration: Collaborates with different departments to align operational processes and ensure seamless coordination with all stakeholders.Task Management: Utilizes task management software (Asana) to organize, track, prioritize, and complete routine tasks.Organization and Time Management: Able to prioritize tasks while staying on top of multiple workflows in process and to achieve those tasks on time and on target. EXPERIENCE & OTHER REQUIREMENTS Must pass required background check and drug screening and motor vehicle record.Must be 21 years or older w/ valid driver's license Works well in the presence of all pests Physical labor experience (working in outside conditions) Ability to bend, lift, sit, stretch, reach, crouchAble to lift at least 50 pounds Benefits Medical, dental, vision, life insurance 401K with company matchPTO and Paid HolidaysEmployee Assistance Program (EAP)Short and Long Term Disability Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys - Day ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221061Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV is seeking a Director of Fleet Maintenancewho is adynamic, multi-task oriented,senior professional to provide oversight and support, and willensurethat all contractual requirements are achieved. Duties included will consist of monitoring the daily, weekly, monthly and annual reports, and must be able to properly manage a budget for the maintenance program and innovative preventive maintenance initiatives. Qualifications: Talent RequirementsMust have a minimum of eight (8) to 10 combined years of fixed route bus maintenance management experience. Must have experience managing/ directing 20 plus employees (fleet techs/service workers/cleaners).Experience working with 100+ buses within the last year.Experience working in transit industry within the last year.Previous passenger transportation in current project or similar environment preferred.Must have client interface track record on strategic fleet initiatives, OSHA regulations and environmental requirements.Must be able to manage and interface with unionized labor. Must have the ability to track and control parts inventories, vendors and suppliers and warranty cost savings.Must be able to properly prioritize, implement and manage work schedules, projects and assignments. Must be able to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have technical competence with light/medium/heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.ASE or manufacture’s certifications a plus.Technical experience with fixed route/coach transit bus maintenance.Solid knowledge of managing audits, PM schedules.Experience with Diesel, CNG, and Alternative fuels a plus.College degree or equivalent business management experience.Management experience required.Experienced in Word, Excel and database software and fleet software platforms.Strong analytical skills.Strong written andverbal communication skills.High degree of multi-tasking skills.Must have a CDL class B with passenger and airbrake endorsement.Starting salary range: $115,000 - $135,000MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Hawx Pest Control Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Pest Control Service Professional. We welcome candidates from other hard-working, blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! You will inspect and perform pest control treatments for residential and commercial customers using high-quality and environmentally-responsible products. You will exemplify excellent customer service and professionalism while following a daily schedule of services.DETAILS Full-time position$16 - $20 per hourUp to $4,000 sign on bonus for licensed candidates Responsibilities Enter/exit structures, crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders.Must deliver premier customer service to resolve pest issues.Read and interpret pesticide labels to correctly mix products based on areas measured and quantities needed.Record work activities and complete all paperwork after finishing services.Perform residential pest management service routes with the highest level of customer service, professionalism, and efficiency.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, identify/eliminate conducive conditions and perform proper treatments. Maintain and care for company equipment, vehicle and gas card and other job-related items. Address and alleviate customer concerns and pest related issues by using integrated pest management strategies Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and energizes people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with team members from different departments. Emotionally Intelligent, Strong Communicator: Effectively conveys ideas and information in a way that is suited to different audiences and personalities. Actively listens to team members and incorporates feedback and insights gained from others. SKILLS Tech Literate: Proficient with commonly used documents and software (word processing, spreadsheets, etc.) and capable of learning new software in a fast-paced environment. Familiarity with Google Workspace tools is a plus.Problem-solver: Prioritizes understanding the problem over chasing new solutions. Pays close attention to the details and has a keen sense for what's not working and how it can be improved.Operational Efficiency: Understands operational processes and workflow optimization strategies to enhance productivity and efficiency.Cross-Functional Collaboration: Collaborates with different departments to align operational processes and ensure seamless coordination with all stakeholders.Task Management: Utilizes task management software (Asana) to organize, track, prioritize, and complete routine tasks.Organization and Time Management: Able to prioritize tasks while staying on top of multiple workflows in process and to achieve those tasks on time and on target. EXPERIENCE & OTHER REQUIREMENTS Must pass required background check and drug screening and motor vehicle record.Must be 21 years or older w/ valid driver's license Works well in the presence of all pests Physical labor experience (working in outside conditions) Ability to bend, lift, sit, stretch, reach, crouchAble to lift at least 50 pounds Benefits Medical, dental, vision, life insurance 401K with company matchPTO and Paid HolidaysEmployee Assistance Program (EAP)Short and Long Term Disability Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Master Aircraft Technician A&Pin GAC Van NuysUnique Skills:Van NuysThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 8 years Aviation Maintenance experience to include 4 years of experience working on Gulfstream mid/large size aircraft required. Corporate aircraft experience preferred. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Expert Aircraft Technician that works independently and in a leadership role as necessary to perform a variety of aircraft mods and mtc functions. Technical expert on in-service aircraft and perform repairs on installations that require a high degree of accuracy and timeliness. Function independently on a team and in a leadership role when required.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic mtc and necessary servicing of all acft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time . Provide work direction for assigned techs. Promote high standards of quality through instruction and example . Act on behalf of lead in their absence and assume duties and responsibilities (to include leading team meetings) when assigned . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirement . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow SOPs and JSAs when operating GSE. Operate and supervise use of special support equipment in removal and installation of major components . Coordinate movement of aircraft as required. Act as mentor and assist in training new employees in CMPs, maintenance manuals, SRMs, IPC usage, flight test installations, Solumina, RS compliance records, and all maintenance of major components. Sign off OJT records as required. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Participate in SMS, including investigations and participation in Site Safety Council . Assist or lead problem solving initiatives and process implementation. Support Lean activities . Assist in problem solving to establish or correct planning methods for aircraft projects by utilizing standard techniques, procedures, and criteria . Assess strengths and weaknesses of assigned members. Provide diverse learning opportunities . Maintain a current knowledge of industry standards, vendor information, and all other procedures, pubs, and a general knowledge pertaining to product support maintenance . Assist in maintaining work schedules . Maintain current knowledge of warranty and parts programs to ensure proper processes are followed . Identify risk and recommend mitigation options to leadership .Additional Functions: Use material tracking system to create parts demand and charge labor to correct work orders and item numbers. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Implement and apply Lean/CI processes to all areas of responsibility . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. In support of aircraft cert and final phase testing, may include flight tests on aircraft .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221060Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Hawx Pest Control Service Professional About Hawx Hawx Pest Control is a technology-driven company that is revolutionizing the pest management industry. Hawx serves a crucial public health function by using state-of-the-art equipment and environmentally conscious products to protect the people and places our customers love. At Hawx we pride ourselves on our internal company culture. Our team members benefit from being part of a company that actively rewards employees for being team players while providing ample opportunity for personal and professional growth. We understand how important it is to recruit and reward people who are enthusiastic about developing their careers and opening new opportunities while delivering a best-in-class customer experience. Job Summary We are seeking to hire a talented Pest Control Service Professional. We welcome candidates from other hard-working, blue-collar industries, such as construction, lawn care, landscaping, retail, grocery, sanitarians and other customer service-oriented backgrounds. You bring the right attitude and customer service experience, and we will provide the training to ensure your success! You will inspect and perform pest control treatments for residential and commercial customers using high-quality and environmentally-responsible products. You will exemplify excellent customer service and professionalism while following a daily schedule of services.DETAILS Full-time position$16 - $20 per hourUp to $4,000 sign on bonus for licensed candidates Responsibilities Enter/exit structures, crawl spaces, climb over and on top of structures, ascend and descend stairs and ladders.Must deliver premier customer service to resolve pest issues.Read and interpret pesticide labels to correctly mix products based on areas measured and quantities needed.Record work activities and complete all paperwork after finishing services.Perform residential pest management service routes with the highest level of customer service, professionalism, and efficiency.Complete all duties required by a pest/mosquito/termite service professional: customer consultation, inspection, identify/eliminate conducive conditions and perform proper treatments. Maintain and care for company equipment, vehicle and gas card and other job-related items. Address and alleviate customer concerns and pest related issues by using integrated pest management strategies Qualifications TRAITS Reliable: Establishes and upholds our company culture and values. Believes in the company mission and the Hawx culture of excellence. Shows up on time and gets the job done. Stays on top of tasks and manages time and responsibilities well. People Person: Keeps things positive and energizes people. Adaptable and flexible while working with different personality styles. Develops strong working relationships with team members from different departments. Emotionally Intelligent, Strong Communicator: Effectively conveys ideas and information in a way that is suited to different audiences and personalities. Actively listens to team members and incorporates feedback and insights gained from others. SKILLS Tech Literate: Proficient with commonly used documents and software (word processing, spreadsheets, etc.) and capable of learning new software in a fast-paced environment. Familiarity with Google Workspace tools is a plus.Problem-solver: Prioritizes understanding the problem over chasing new solutions. Pays close attention to the details and has a keen sense for what's not working and how it can be improved.Operational Efficiency: Understands operational processes and workflow optimization strategies to enhance productivity and efficiency.Cross-Functional Collaboration: Collaborates with different departments to align operational processes and ensure seamless coordination with all stakeholders.Task Management: Utilizes task management software (Asana) to organize, track, prioritize, and complete routine tasks.Organization and Time Management: Able to prioritize tasks while staying on top of multiple workflows in process and to achieve those tasks on time and on target. EXPERIENCE & OTHER REQUIREMENTS Must pass required background check and drug screening and motor vehicle record.Must be 21 years or older w/ valid driver's license Works well in the presence of all pests Physical labor experience (working in outside conditions) Ability to bend, lift, sit, stretch, reach, crouchAble to lift at least 50 pounds Benefits Medical, dental, vision, life insurance 401K with company matchPTO and Paid HolidaysEmployee Assistance Program (EAP)Short and Long Term Disability Hawx Services, LLC is an Equal Opportunity Employer committed to fostering an inclusive work environment with the most qualified employees. Both in our hiring process and in the experiences that our team members have as employees, Hawx is committed to diversity, equity, and inclusion. Accordingly, Hawx is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, sexual orientation, age, marital status, disability, gender identity, or veteran status.

Aircraft Technician II - Multiple Shiftsin GAC Van NuysUnique Skills:Van Nuys Day Shift & Weekend Night ShiftThe compensation range for this role is:$35.19 to $38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220263Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 06/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Quality Manager/Chief Inspectorin GAC Van NuysUnique Skills:Experience working in a FAA 145 Repair station. Preferred prior experience working with foreign civil aviation authorities.The compensation range for this role is:$132,465.00 - 142,250.00 AnnuallyFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsBachelor's Degree in aviation sciences, quality systems or related field required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 6 years technical experience within Part 25 aircraft, working with a highly regulated quality assurance system. 3 years supervisory capacity. Position Purpose:Responsible for implementing, managing and enforcing Repair Station quality policies and procedures; perform all duties of Chief Inspector. Manage and control the operations and personnel engaged in the performance of quality department activities to ensure safe, compliant and quality products are delivered by the Repair Station. Ensure policies, procedures and practices are consistent and compliant with US and international regulatory requirements to attain and sustain Repair Station business commitments.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Ensure the Repair Station is in compliance with all applicable regulatory requirements and manufacturers recommendations to assure all maintenance, repair, and alteration work is performed in accordance with applicable maintenance and regulatory requirements. May perform one or multiple of the following additional duties based on Repair Station General Manager assignments: Safety Management System (SMS) coordinator; Training Coordinator; Continuous Improvement coordinator; EHS coordinator; Security coordinator; Export/Import compliance; PMA approvals. Manage planning and development of quality standards, methods and procedures used by the Repair Station in complying with all applicable regulatory requirements and ensure effective utilization of labor and materials. Establish training programs to continually upgrade employees technical capabilities and knowledge of governing procedures, regulations and requirements. Promote employee suggestions and foster a team environment with high morale. Maintain working relationships with local regulatory authorities, OEMs and vendors to ensure the Repair Stations continued growth and successful daily operation. Promote and foster departmental goals and objectives. Explain and reinforce the company values and goals to employees with an emphasis on safety. Appraise performance, reward and discipline employees, address complaints and resolve problems in a timely manner. Assign tasks to subordinate employees to meet company and customer needs; hire qualified personnel as the need arises. Prepare departmental budgets and establish procedures and controls to ensure that expenditures are within the company guidelines.Additional Functions: Establish procedures for completing, maintaining and filing all inspection forms and documents used by the Repair Station. .Perform other duties as assigned.Other Requirements: An Airframe and Powerplant (A&P) license is required. An A&P license and 4 years of related quality experience (in addition to the experience requirements) may offset the Bachelors degree. Possess a comprehensive knowledge of FAR Part 145 and associated guidance materials, Part 43, Part 91, Part 121 and Part 135 as these parts apply to work accomplished under the RS Cert. Possess a comprehensive knowledge of interpretations, applications, and procedures for completing FAA paperwork including FARs, FAA Orders, Advisory Circulars, Form 337, Form 8130-3, Form 8110, STCs, and other pertinent paperwork. Advanced knowledge of inspection and cert processes, a general working knowledge of the various aircraft, and familiarity with pertinent FARs and tech reference materials. Thorough knowledge of quality policies, procedures and all related tech data. Ability to work within the various software apps utilized throughout the corp. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220182Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS Airworthiness Inspector Sr A&P - 5th Shiftin GAC Van NuysUnique Skills:Able to work in an extremely fast paced environment5th shiftThe compensation range for this role is: $44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 219976Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 05/31/2024#LI-GH1Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS Avionics Electrical Technician IIin GAC Van NuysUnique Skills:Day Shift - Van NuysThe compensation range for this role is:$35.19 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221481Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Electrical Technician IIin GAC Van NuysUnique Skills:This role is for First ShiftWire harness build and repair experience required.Previous experience on Gulfstream aircraft avionics/electrical systems preferred.The compensation range for this role is:$35.19 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221324Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/02/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS Mechanical Team Lead A&Pin GAC Van NuysUnique Skills:This position is for 2nd shift Van NuysThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221447Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft