Aircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys 4th ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221439Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Shift: 7:30am-4:00pmAvionics Technician IIBuild an Aviation Career You're Proud OfAt Western Jet Aviation, a company of StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well.As an Avionics Technician II, you will be responsible for avionics systems modifications. You will also be responsible for the maintenance functions of assigned tasks to customer specifications, FAA standards, and Repair Station Manual.What you'll do:Adjust, repair or replace malfunctioning components or assemblies using hand tools and or soldering irons.Assemble components such as switches electrical controls, and junction boxes using hand tools and soldering irons.Connect components to assemblies such as radio systems, instruments, inverters, using hand tools and soldering irons.Install electrical and electronic components, assembles and systems in aircraft.Interpret flight test data in order to diagnose malfunctions and systemic performance problems.Lay out installation of aircraft assembling and systems, following documentation; blueprints, manuals, wiring diagrams.Test and troubleshoot instruments, components and assembling using circuit testers, oscilloscopes, voltmeters.Assemble prototypes or models of circuits, instruments and systems to be used for testing.Maintain records of maintenance and repair work.Set up and operate ground support and test equipment to perform functional flight tests of electrical and electronic systems.Position Requirements:Gulfstream aircraft avionics or corporate jet avionics experienceBenefits that make life betterComprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesSalary: $30-40 per hour based on experienceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflowPay from $30 - $48/hourSign on bonus up to $3,000 DOE! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

$20.00/hourUp to $500 Retention BonusShift Premium may ApplyImmediately hiring! Are you a responsible and detail-oriented individual with a deep passion for automobiles Look no further! We are currently seeking enthusiastic candidates who have recently completed a technical school program or gained experience in manufacturing, warehouse operations, automotive garages, or auto dealerships. If you're looking for an exciting opportunity, become a valued member of Avis Budget Group organization.What You'll Do: You will perform preventative maintenance functions on our auto fleet of vehicles. This includes oil, fluid, tire changes, repairs and rotations, all in a safe manner. Depending on your experience, you may be assigned basic repairs or assist our experienced auto mechanics.Perks You'll Get: Bi-weekly pay (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive or mechanical abilities, help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars * Above perks may vary based on full-time/part-time status and location What We're Looking For: Valid Driver's License and good driving recordProven car mechanical or maintenance skillsComfortable working in a mechanical shop with moderate or loud noise levelBasic computer skills (typing, data entry)Flexibility to work all shiftsMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotely6 months auto maintenance or auto tech school degree a bonus!Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.The fine print: Avis Budget Group is an equal opportunity employer - M/F/Veterans/Disabled. This role requires the ability to lift up to 50 pounds, continuously stand, walk, sit and kneel frequently, and enter and exit vehicles. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. This position may be with any affiliate of Avis Budget Group.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. Los AngelesCaliforniaUnited States of America

Sign on bonus eligibleMaster Aircraft Technician A&Pin GAC Van NuysUnique Skills:Van NuysThis position is hiring for first and second shiftThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 8 years Aviation Maintenance experience to include 4 years of experience working on Gulfstream mid/large size aircraft required. Corporate aircraft experience preferred. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Expert Aircraft Technician that works independently and in a leadership role as necessary to perform a variety of aircraft mods and mtc functions. Technical expert on in-service aircraft and perform repairs on installations that require a high degree of accuracy and timeliness. Function independently on a team and in a leadership role when required.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic mtc and necessary servicing of all acft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time . Provide work direction for assigned techs. Promote high standards of quality through instruction and example . Act on behalf of lead in their absence and assume duties and responsibilities (to include leading team meetings) when assigned . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirement . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow SOPs and JSAs when operating GSE. Operate and supervise use of special support equipment in removal and installation of major components . Coordinate movement of aircraft as required. Act as mentor and assist in training new employees in CMPs, maintenance manuals, SRMs, IPC usage, flight test installations, Solumina, RS compliance records, and all maintenance of major components. Sign off OJT records as required. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Participate in SMS, including investigations and participation in Site Safety Council . Assist or lead problem solving initiatives and process implementation. Support Lean activities . Assist in problem solving to establish or correct planning methods for aircraft projects by utilizing standard techniques, procedures, and criteria . Assess strengths and weaknesses of assigned members. Provide diverse learning opportunities . Maintain a current knowledge of industry standards, vendor information, and all other procedures, pubs, and a general knowledge pertaining to product support maintenance . Assist in maintaining work schedules . Maintain current knowledge of warranty and parts programs to ensure proper processes are followed . Identify risk and recommend mitigation options to leadership .Additional Functions: Use material tracking system to create parts demand and charge labor to correct work orders and item numbers. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Implement and apply Lean/CI processes to all areas of responsibility . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. In support of aircraft cert and final phase testing, may include flight tests on aircraft .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221057Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-GH1

Shift: 2:00pm-10:30pmAvionics Technician IIBuild an Aviation Career You're Proud OfAt Western Jet Aviation, a company of StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in Aviation. Together, we get the job done and done well.As an Avionics Technician II, you will be responsible for avionics systems modifications. You will also be responsible for the maintenance functions of assigned tasks to customer specifications, FAA standards, and Repair Station Manual.What you'll do:Adjust, repair or replace malfunctioning components or assemblies using hand tools and or soldering irons.Assemble components such as switches electrical controls, and junction boxes using hand tools and soldering irons.Connect components to assemblies such as radio systems, instruments, inverters, using hand tools and soldering irons.Install electrical and electronic components, assembles and systems in aircraft.Interpret flight test data in order to diagnose malfunctions and systemic performance problems.Lay out installation of aircraft assembling and systems, following documentation; blueprints, manuals, wiring diagrams.Test and troubleshoot instruments, components and assembling using circuit testers, oscilloscopes, voltmeters.Assemble prototypes or models of circuits, instruments and systems to be used for testing.Maintain records of maintenance and repair work.Set up and operate ground support and test equipment to perform functional flight tests of electrical and electronic systems.Position Requirements:Gulfstream aircraft avionics or corporate jet avionics experienceBenefits that make life betterComprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesSalary: $30-40 per hour based on experienceRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture.About UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

$32.00/HourUp to $500 Retention BonusShift Premium may ApplyImmediately hiring! We're looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise.What You'll Do:As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures.Perks You'll Get:Bi-weekly hourly wage (New York and Puerto Rico: weekly wage)On-the-job training to expand your automotive abilities and help to obtain ASE CertificatesPaid time offMedical, dental and other insuranceFlexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expensesRetirement benefits (401k)Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars* Above perks may vary based on full-time/part-time status and locationWhat We're Looking For:Valid Driver's License and good driving recordAt least 2 years of auto repair experience or coursework with automotive certifications1 ASE certification (ability to acquire 2 additional ASE certifications within first year)Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/DieselComfortable working in a mechanical shop with moderate or loud noise levelsMust have a complete set of tools required for auto repair and maintenanceBasic computer skills including typing, data entryMust be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehiclesMust be 18 years of age and legally authorized to work in the United StatesThis position requires regular, on-site presence and cannot be performed remotelyPrevious Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we're moving the future of transportation forward with our innovative, customer-focused solutions.Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards.We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate.Avis Budget Group is an Equal Opportunity Employer - Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. Los AngelesCaliforniaUnited States of America

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys - Day ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221061Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van Nuys - Day ShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221061Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Responsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to ensure a safe work environmentPerform other related duties as assigned Requirements:High School Diploma or GED3-5 years experience in a maintenance of Can Assembly Presses within a manufacturing environment; or an equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Electrical ExperienceAbility to interpret documents such as procedure manuals, blueprints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Sign on bonus eligibleAircraft Technician Sr A&Pin GAC Van NuysUnique Skills:Van NuysDay shift and 5th shift openingsThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221059Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 07/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Mechanical Team Lead A&Pin GAC Van NuysUnique Skills:This position is for 5th shift Van NuysThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221055Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend NightsEmployment Type: Full-timePosting End Date: 07/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Interior Install Tech Srin GAC Van NuysUnique Skills:Must be willing to work any shiftThe compensation range for this role is: $35.20 to $38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional InformationRequisition Number: 222228Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician IIin GAC Van NuysUnique Skills:The compensation range for this role is:$36.31 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222325Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft