What this job involves –Supervises and directs maintenance personnel in installation, repair, and maintenance of all base building and critical systems machinery and equipment. Responsible for supervising the operating team onsite. Assumes the Chief Engineer responsibilities when the Chief is not onsite.What is your day to day ManagementSupervises and directs maintenance of staff on shift and monitors performance of their assigned responsibilities.Performs and/or directs the performance of all maintenance departmental service requests, ensuring that work performed in these areas is accomplished efficient with a minimum amount of disruption and inconvenience.Ensures the availability of an adequate operating inventory of tools and supplies. Specific duties include, but not limited to: preparing and submitting purchase order requests, developing sources for stock materials and performing periodic checks for supplies.SafetyChecks malfunctioning equipment and ascertains corrective action required to restore to satisfactory operating condition.Supervises and implements the preventative maintenance program. Specific duties include but are not limited to: scheduling of preventative maintenance with a minimum disruption of building services, performing and/or delegating preventative maintenance tasks to the appropriately qualified maintenance staff member, order parts and equipment required for repair, maintenance and installations of new equipment and facilities, and maintains inventory.Complies with departmental policy for the safe storage, usage, and disposal of hazardous materials. Maintains a clean and safe workplace.TrainingProvides training and supervision aimed at expanding the capabilities of the operations staff. Specific duties include, but not limited to: demonstrating the proper use and care of tools and instruments, giving hands-on instruction in basic maintenance, safety, and troubleshooting procedures, recommending relevant outside engineering courses for enrollment and instilling an overall level of professionalism in manner and appearance.Operations, Maintenance & Repair (OM&R)Possess hands-on skills and knowledge to complete required repairs and maintenance on commercial buildings and building systems (including, but not limited to: HVAC, Electrical, Plumbing, Vertical Transportation, Life Safety, Roofs, Structure, Parking Lots and Roads) using industry standard tools and in accordance with all codes, laws, and regulations.Perform preventative maintenance and repair service work on HVAC, mechanical, plumbing, electrical, and various other building systems to maintain the properties in peak operational conditions.Customer ServiceKnowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.Physical RequirementsAbility to lift 50 pounds.Ability to bend, sit, kneel, squat, stand, reach and lay as required to access equipment components for extended periods of time.Ability to work exposed to heat, sunlight, rain, cold, daylight and nighttime hours as required.Desired experience and technical skillsRequired2+ years of trade schooling in electrical system design, refrigeration, and HVAC.5+ years of experience in facility/plant engineering maintenance.5+ years of experience in supervision/leadership roles.Exposure to HVAC, fluid handling/pumping, fluid filtering, mechanical systems, welding and electrical systems engineering and operation.Ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as requiredAbility to effectively use computers and computer programs; including Microsoft Office Suite.Skill in use of the Internet to navigate to and use web-based applications.Possess excellent communications skills both written and verbal.PreferredStationary Engineer License and/or Universal EPA 608 Certification.

Unit Description: Precise. Reliable. Powerful. Join a team as innovative as the technology we manage.****Full Relocation Package is Included!****Sodexo's Healthcare Technology Management Division seeks an experienced, reliable, & personable Clinical EngineeringSupervisor for PIH Health Hospital located in Whittier, California. PIH Health Whittier Hospital was founded in 1959 by community members who needed quality healthcare services close to home. The 523-bed hospital has grown into a healthcare system that serves residents of Los Angeles County, Orange County and the San Gabriel Valley region. In addition to the hospital, the Whittier campus is home to the Washington and Wells Medical Office Buildings, a community pharmacy, an outpatient surgery center and the Patricia L. Scheifly Breast Health Center.Are you a talented Clinical Engineering Services Site lead, Supervisor or Manager with project management skills, looking for your next move to be in Whittier, CA Then this is an opportunity you should consider - leading a team within the Clinical Technology Service Provider Market. Ideal candidate experience includes successful partnerships with hospital administration and management of service team within a clinical setting. Role will be an active contributor on committees and manage team and the day to day service opportunities as well as plan for longer term services and equipment purchase. Should be knowledgeable of risk, regulatory, IT and other health-care needs and have great track record of leadership and client service capabilities. Position Responsibilities:The ideal candidate will have working knowledge of healthcare technology operations and equipment, supervisory and leadership abilities, and experience with data management. Microsoft excel experience is required.This position will oversee both biomedical and imaging services including vendor management, regulatory compliance, and project management. Position may require local travel to accounts and clinics in the area.HTM/ Clinical Engineering Supervisors have:Experience repairing, maintaining, and calibrating medical devices.Experience in a hospital or healthcare setting.The ability tobeorganized, resourceful, adept at making decisions and managing budgets.Strong service focus toinclude the ability to engage staff, vendors, and client to ensure service is continually sustained at a high level.Leadership capabilities to oversee operations, client relations, and supervise their technician and engineering staff.Excellent communication, customer service and time management skills.Please learn more about PIH Health at:https://www.pihhealth.org/Sodexo offers a full array of benefits including paid time off, holidays, medical, dental, vision, 401K and access to ongoing training and development programs, tuition reimbursement, plus health and wellness programs.Working for Sodexo:How far will your ambition, talent and dedication take you Sodexo fosters a culture committed to the growth of individuals through continuous learning, mentoring and other career growth opportunities, along with the performance of organizations. We believe it is important for our work to be meaningful to all who contribute to it, and we remain faithful to our mission, our core values and the ethical principles that have guided us since 1966. We support these values and help them thrive in each employee.We strive to make working for Sodexo a genuinely great experience with benefits to promote your professional, personal, and financial well-being, and to improve your Quality of Life now and into the future. Our experiences with our over 50 million customers each and every day enable us to develop Quality of Life services that reinforce the well-being of individuals, improving their effectiveness and helping companies and organizations to improve performance every day.Not the job for you At Sodexo, we have HTM positions at numerous client locations across the United States.Continue your search for HTM jobs What We Offer: Sodexo offers fair and equitable compensation, partially determined by a candidate's education level or years of relevant experience. While the budgeted range for the position is posted, Sodexo salary offers are based on a candidate's specific criteria, like experience, skills, education and training. Qualifications & Requirements: Basic Education Requirement - Bachelor’s Degreeor equivalent experience Basic Management Experience - 3 years Basic Functional Experience - 3 yearswork experience in facilities (e.g., maintenance, plant operations, engineering services, grounds, custodial/environmental, or transportation) or a related fieldSodexo is an EEO/AA/Minority/Female/Disability/Veteran employer.

JOB SUMMARY The Dimensional/Layout Inspector / Computerized Measuring Machine (CMM) Programmer Level I carries out the following responsibilities: Run CMM pre-existing programs, create new Part programs, ability to read blue prints, Interprets Geometric Dimensions and Tolerances, and able to inspect product on open setup. ESSENTIAL JOB FUNCTIONS/DUTIES Perform visual and dimensional inspection of castings to determine conformance to blue print, or electronic file requirements.Ability to interpret geometrically dimensioned and tolerance engineering drawings.Perform First Article Inspection Reports using AS9102 Forms as required.Work from and with dimensional inspection measurement equipment such as surface plate, sine plates, height gages, radii gages, calipers, micrometers and other assorted hand measurement equipment.To perform the CMM Operator job successfully, an individual must be able to perform each essential responsibility satisfactorily. These requirements are representative, but not all – inclusive, of the knowledge, skill, and ability required of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. QUALIFICATIONS Education: High school diploma or general education degree (GED)Experience: Utilization of both CMM and hand equipment to perform dimensional inspection techniques.Certifications/Licenses: AFS Laboratory Certification Preferred. Other Required Knowledge, Skills & Abilities: Computer Skills: Virtual Dimensional Measuring Interface Specification (DMIS) 6.0, Virtual DMIS, Routine CMM Operation, Geometric Dimensioning and Tolerance, Expert PC-DMIS Knowledge required.Polyworks And Bluelight scanning a plus.Software experience; Excel, Word, Power Point, etc.Ability to read blue prints in order to determine and measure features and tolerances.Ability to interpret reduced dimension drawingsAbility to program using electronic modelSurface Plate Inspection using Standard Inspection ToolsKnowledge of Aerospace Standard (AS) 9100 requirementsBilingual – English/Spanish a Plus Hourly Rate - $35 - $40 Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management positionThis is a full time position

Leidos QTC Health Services seeks an experienced Systems Engineer to support our corporate IT team. Who is Leidos QTC Health Services Leidos QTC Health Services collaborates closely with government and non-government customers to address current and future program needs within the health services domain. We specialize in disability-focused medical examinations, independent medical exams and review services, occupational health services, diagnostic testing, and case management solutions. As innovators, we focus on advancing technologies that improve service delivery, with a particular emphasis on enhancing accessibility for examinees in rural communities. With a proven track record of continuous improvement and steady growth, we now handle over 2 million appointments annually. Visit www.qtcm.com for more information. This position is fully remote Essential Duties and Responsibilities: Participate in the identification of system requirements, design elements, development or integration efforts, and implementation of the system or system of systemsAnalyze, recommend and design end-to-end enterprise systems composed of IT architecture, Leidos QTC developed software components, or commercial off the shelf capabilitiesCreate and deliver technical proposals and presentations for engineer reviews (e.g., requirements, design, test, operational readiness)Coordinate projects with vendors to expand our business-critical systemsAssists in the initial design and development of new systems/solutions including consideration for database, security, scalability and other usability criteriaAssists in defining product requirements and creates high-level architectural specifications, ensuring feasibility, functionality, and integration with existing systems/platformsTranslates business needs into long-term implementable and sustainable systemsWrites, maintains, evaluates, and effectively communicates engineering design documents and interface control documents (ICDs)Directs design choices to software engineers, including but not limited to: platforms, coding and technical levelsPerforms feasibility analysis on potential future projects to managementCommunicates with executive leadership (internally or client) regarding matters of significant importance to the organization/project Competencies: Demonstrated track record in architecting, implementing and maintaining complex enterprise solutions and workflowsProven experience working on large-scale projects Proven ability to visualize end-to-end system components across a wide range of technologies and translate into architectural design patterns for implementation Outstanding collaboration and communication skill are essential Lead development and/or operational/sustainment program experience Requirements: Bachelor's degree in a related discipline with 5-9 years of relevant professional experience. Additional years of experience may also be considered in lieu of a degreeMust have a fundamental understanding of operating systems, including Microsoft Windows 2012 and beyondExperience with installation/configuration, operation, and maintenance of systems hardware and software and related infrastructuresPrevious experience monitoring system hardware and operating systemsMust be able to successfully pass National Agency Check with Inquiries (NACI) background investigation Desired: Experience working on healthcare or military systems is a plus Pay and Benefits: $90,000-$110,000 w/ 8% bonus eligibility Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. As a result, we offer meaningful and engaging careers to support you and your career goals, all while nurturing a healthy work-life balance. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available here: Join Our Team | Jobs & Career Opportunities | Leidos QTC Health Services (qtcm.com) The Leidos QTC Health Services pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to): geographic location, responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. Leidos QTC Health Services. is a VEVRAA Federal contractor and an Equal Opportunity Employer. The company has an ongoing commitment to affirmative action and the creation of a workplace free of discrimination, harassment and retaliation. The company recruits, hires, trains, and promotes individuals in all job titles without regard to race, color, creed, religion, ancestry, national origin, age, sex, pregnancy, sexual orientation, gender identity, genetic information, people with disabilities protected under law, and protected veteran status. * This job description supersedes all prior job descriptions and is intended to describe the general content and essential requirements for the position listed above. It is not to be construed as an exhaustive statement of requirements, duties and responsibilities. Management reserves the right to add or change the duties of this position as required at any time.Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Join Our Team as aSenior DevelopmentEngineer in the Aerospace Industry! Our client, a leading company in the aerospace industry, is seeking an Engineerto join their team. As a Senior Development Support Engineer, you will be part of the Post Development Support Department supporting the Engineering and Operations Teams. The ideal candidate will have strong problem-solving skills, excellent communication abilities, and a proactive approach to resolving issues which will align successfully in the organization. Job Title:Senior DevelopmentEngineer Location: Irvine, CA Pay Range: $ 43-47/hr What’s the Job Coordinate timely and cost-effective responses to technical inquiries from customers and end-users for products in service. Support Operations in daily meetings to ensure timely disposition of non-conforming hardware. Utilize Design for Six Sigma and Red X principles to address technical problems and work through Root Cause Corrective Actions (RCCA). Define required work tasks for support personnel and prepare reports documenting conclusions and recommended corrective actions. Identify, lead, and implement cost-out projects for the site, supporting supply chain and manufacturing cost initiatives. What’s Needed Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited university. Minimum 3 years of experience in product design, development, and/or production design problem resolution. Strong hands-on skills in working with mechanical components disassembly and assembly. Six Sigma (DMAIC), Design for Six Sigma (DFSS), or Shainin Red X certification preferred. Willingness to travel up to 10%, including some international travel. What’s in it for me Benefits: Medical, Dental, Vision, 401k with Match Weekly pay with direct deposit Holiday Pay Referral Rewards Monthly Recognition Programs Dedicated Career Partner to help you achieve your career goals If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job Summary:This position troubleshoots, calibrates, and adjusts plant floor devices as necessary to maintain optimal performance of plant floor equipment. This position sorts calls and breakdowns and expedites their completion. This position provides information to maintenance mechanics on how to complete required repairs to resolve breakdown situations. This position assists in solving the daily problems inherent in keeping the conveyors or physical facility in good working order.Work days and hours: Monday - Friday 0100 - 0930 OR Sunday - Thursday 0800 - 1630Responsibilities:Responds to internal customers.Responds to facility alarms and emergencies.Troubleshoots problems that arise.Performs preventative maintenance.Qualifications:Bachelor's degree or international equivalent in engineering - PreferredProgramming experience including troubleshooting, basic understanding of networks, motor control theory, and operation including basic AC and DC electrical troubleshooting - PreferredProficiency in Microsoft Office productsAbility to read and interpret electrical schematics and elementary diagramsCompensation and Benefits:Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $54,496/year to $88,608/year. Pay is based on several factors including but not limited to, market location and may vary depending on job-related knowledge, skills, and education/training and a candidate’s work experience. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This position is eligible for a bonus based on company performance. ??Hired applicants may be eligible for Medical/prescription drug coverage, Dental & Vision Benefits, Flexible Spending Account, Health Savings Account, Dependent Care Flexible Spending Account, Basic and Supplemental Life Insurance & Accidental Death and Dismemberment, Disability Income Protection Plan, Employee Assistance Program, Educational Assistance Program, 401(k) retirement program, Vacation, Paid Holidays and Personal time, Paid Sick/Family and Medical Leave time as required by law, Discounted Employee Stock Purchase Program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Unit Description: Lifesaving technology powered by you. Your expertise impacts the lives of others.Sodexo at PIH Health has a great opportunity for a Clinical Systems Engineer- Cybersecurity located in Whittier, CA primarily.PIH Health Whittier Hospital was founded in 1959 by community members who needed quality healthcare services close to home. The 523-bed hospital has grown into a healthcare system that serves residents of Los Angeles County, Orange County and the San Gabriel Valley region. In addition to the hospital, the Whittier campus is home to the Washington and Wells Medical Office Buildings, a community pharmacy, an outpatient surgery center and the Patricia L. Scheifly Breast Health Center.Typical Knowledge & Skills:Strong Analytical Ability – aggregation of complex data sets, sorting of data into logical segments, identification of relevant data trends, summary of findings, executive-level display of data insightsTranslation of Data into Strategy – ability to develop core components of a robust strategy with minimal direction, connection of data evidence & outcomes to progress towards defined goals, adjust strategy based on data, identify opportunities for improvement or pivotStrong Understanding of Clinical Workflows – ability to identify impact of a change on patient safety, risk, and/or delivery of patient care including the efficient use of medical technologies, common challenges and risks in the clinical environment, understanding of infection control and safety protocols in the clinical environment, some understanding of key clinical metrics.Software and Server Management – knowledge and experience with hands-on management of highly technical and sensitive hardware and software used to support the delivery of patient care, includes the daily management of key components to ensure high uptime and availability, some experience with the triage and troubleshooting of highly technical scenarios, some ability to oversee the response to both planned and unplanned downtime of key componentsChange Management – ability to engage stakeholders proactively to plan for change, ability to monitor progress and identify red-flags, ability to empathize and support stakeholder response to change, ability to promote positive outcomes and benefits of changeCore Competencies:ResourcefulnessManages AmbiguityCollaboratesDrives ResultsOptimizes Work ProcessesPreferred Qualifications (But, not required):MS degree preferredCertification in Clinical Engineering (CCE) or comparable HTM certification preferredCybersecurity or IT Certifications Preferred, such as: CISSP, HCISSP, CISM, CISAIs this opportunity right for you Working in Healthcare Technology Managementfor Sodexo, you will partner with ourHealthcare clients to manage their clinical technology needs. Together, we provide leadership and expertise for their business, patients, residents and the staff who care for them. At Sodexo, we improve the Quality of Life of all those we serve.If you share these values, apply today!Please learn more about PIH Health at:https://www.pihhealth.org/Sodexo offers a full array of benefits including paid time off, holidays, medical, dental, vision, 401K and access to ongoing training and development programs, tuition reimbursement, plus health and wellness programs.Not the job for you At Sodexo, we have HTM positions at numerous client locations across the United States.Continue your search for HTM jobs What We Offer: Sodexo offers fair and equitable compensation, partially determined by a candidate's education level or years of relevant experience. While the budgeted range for the position is posted, Sodexo salary offers are based on a candidate's specific criteria, like experience, skills, education and training. Qualifications & Requirements: Basic Education Requirement: Bachelor’s degree or equivalent experienceBasic Functional Experience: 3 yearsSodexo is an EEO/AA/Minority/Female/Disability/Veteran employer.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Description: Milton Hershey School (MHS) is one of the world's best private schools, where students in pre-K through 12th grade from disadvantaged backgrounds receive an exceptional career-focused education with housing, meals, and moreand all costs are covered. Thanks to the generosity of Milton and Catherine Hershey, who founded the school in 1909, the school is fully endowed and has the resources to ensure both students and staff are provided everything they need to thrive. MHS is hiring married couples to become flex houseparents. Flex houseparents are couples who reside in on-campus student homes, guiding and nurturing a group of approximately 8-12 students. Flex houseparents provide a consistent family-like structure for students and handle responsibilities such as driving, administering medication, budgeting, reporting, etc. When initially hired, flex houseparents cover different student homes before being assigned to one specific home. Benefits ·Salary of $42,903 per person (a total compensation package of approx. $150,000 per couple which includes free housing, meals while on duty, utilities, and more) ·Comprehensive benefits: medical, dental, and vision insurance; health savings and flexible spending accounts; life insurance; disability options; retirement savings ·Relocation assistance and paid training provided ·Schedule of nine days on followed by three days off. Workdays include a period of personal time while students are at school ·Three-week paid summer vacationQualifications: ·Experience working or volunteering with youth, preferably from under-served settings ·This is a two-person job for couples who have been legally married for at least two years ·Both spouses should be age 27 or older ·No more than three dependent children may reside in the student home ·Abide by a smoke-free and weapon-free campus. No alcohol is permitted while on duty ·Limitations on pets. Only fish and one dog of approved breeds is permitted ·Valid driver’s license; ability to become certified to drive student home vans ·Couples must be comfortable leading students in daily devotions and take students to Judeo-Christian Sunday chapel services (Note: Proselytizing is prohibited) ·High school diploma or GED required ·Must be able to lift up to 50 lbs. ·Candidates must demonstrate a high degree of integrity as all staff are role models for students. ·Both spouses must complete an individual employment application This is a unique career path that takes consideration and commitment from both spouses. If you have any specific questions before or after applying, please reach out to our recruitment team at .