SEARCH
GO
Skilled & Trades Jobs
Full Time
10/22/2024
Long Beach, CA 90815
(38.7 miles)
Airworthiness Inspector A&P - Van Nuys, CAin GAC Van NuysUnique Skills:2nd Shift - Mon - Thursday - Van NuysAble to work in an extremely fast paced environment. Must be Proficient with Computers and tablets.The compensation range for this role is: $39.39 to $43.53 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223294Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
11/6/2024
Paramount, CA 90723
(40.7 miles)
Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Customer Product Repair Mechanic is a 2nd shift position and is responsible for all processes related to disassembly and assembly of high energy pumps and decoking equipment at Flowserve’s Quick Response Center in Rancho Dominguez, CA. This is a 2nd shift position (3 pm - 11:00 pm) - 10% shift differential Responsibilities: Dismantle, clean, inspect, and assemble pumps and equipment following all safety requirements and meeting tight deadlinesRead and follow accurately all routers, instructions, checklists and engineering drawings during all processesUse torches and liquid nitrogen when appropriate for the disassembly processInspect pumps and equipment, checking dimensions of all critical componentsEnsure components are clean and free from foreign materialComplete accurate, thorough inspection documentation, including photos and written descriptions of the wear and condition of components. Submit documentation for quotation.Explain and discuss as needed the condition of all critical components of the pump or equipmentCoordinate effectively in a small team environment, sharing information and resolving problems with supervisors, sales engineers, machinists, buyers, and planners.After assembly, run balance machine to properly balance impellers and shaftSelf-verify workmanship. Inspect all components for critical fits and run-outs.Complete accurate, thorough assembly documentation, including inspection records, photos, and customer-specific forms.Paint, tag, and prep the pump for shipment to the customer.Exhibit behavior that contributes toward an environment that encourages teambuilding, decision- making, problem solving, and continuous improvements Requirements: 5+ years of experience in after-market repair and service of mechanical equipmentMust have a personal set of mechanic tools and roll-around tool boxMust be able to read and interpret blue prints and drawingsMust speak and communicate ideas clearly, read with good comprehension, and write good paragraphs describing equipmentDemonstrated track record of reliable, dependable work ethic with a personal commitment to quality workmanshipShow an attention to detail, and a respect for processes and instructionsMust show a customer-service, results-oriented mindset at all timesStanding for long times required, frequent lifting with occasional lifting up to 50 pounds. Must have full range of movement to reach, work with hands and arms in various positions, stoop, and move under and around equipment.Must be able to work overtime and weekends as required on short notice Preferred skills: Experience in rotating pumps highly desiredForklift certification desirable Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! The pay range for this position is $36.96 - $46.22 USD Hourl Req ID : R-11867 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.
Full Time
11/11/2024
Riverside, CA 92503
(2.2 miles)
Overview: ConGlobal is seeking an experienced Diesel Truck Mechanic for our location in San Bernardino, CAAs a Diesel Technician/ Mechanic, you are responsible for assessing and repairing our fleet of Semi Tractor/Trailers at the Railyard.We offer:Full Benefit Package – Health, Dental, Vision, 401k with generous match, Tuition Reimbursement, PTO, and more!On the Spot Offers!Competitive Starting Pay: $28.77 - $33.85 hourly. Responsibilities: ResponsibilitiesIdentifies problems with mechanical, hydraulic, diesel & electrical systems and executes solutionsReads & understands hydraulic & electrical schematicsTroubleshoots and repairs diesel engines (Cat, Cummins, Detroit).Performs maintenance & mechanical repairs on Hostlers & Forklifts.Maintains routine maintenance schedules on all Tractor Semi/ TrailersWhat we offer:Competitive pay (willing to negotiate)Benefits include Medical, Vision, Dental, 401k, Career Advancement Opportunities#PR Qualifications: Basic Qualifications:1-3 years of Tractor Semi/Trailer repair & Maintenance experienceKnowledge of diesel engine systems, including fuel, electrical, cooling, and exhaust systemsAble to perform maintenance inspections that include tune-ups, oil changes, and other key services.Able to inspect mileage, belts, flushing fluids, and gasket replacements.Hydraulic and electrical maintenance experience is requiredAbility to lift 50lbs.Open availability required (All Shifts & Holidays)Willingness to work in varying weather conditionsOwning tools preferred but not requiredValid Driver’s LicenseAbout UsConGlobal is your go-to expert for multimodal, industrial, terminal operations.Our roots are planted firmly in the transportation industry. Positioned at the forefront of a rapidly changing global economy, ConGlobal has always been fueled by innovation and adaptation.As we grew our network capabilities, service offerings, and geographical coverage increased, and we emerged with the largest North American footprint in the market.
Full Time
11/9/2024
Mission Viejo, CA 92692
(22.1 miles)
Overview: OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with America’s Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At America’s Tire, we commit to growing our employees and routinely promote from within.Part-Time100% On SitePay Starting at $18Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at America’s Tire performs the following duties, including but not limited to:• Install new tires and wheels• Perform maintenance on tires, including rotations, balancing, repairs, and cleaning• Rewarding Career Path to Management• Follow safety guidelines and best practices• Participate in hands-on, on-the-job training• Provide a world-class customer service experienceWhat We’re Looking For:• Must have an upbeat outlook• Must be dedicated and reliable• Must be coachable and trainable• Must be able to lift a minimum of 50 lbs.• Must enjoy and excel in a team environment• Must be able to function well in a physically demanding environmentWhat We Offer:America’s Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:• Paid Training• Competitive Pay• Weekly Paychecks• 401(k) Retirement Plan• Employee Referral Bonus• Employee Assistance Program• Educational Assistance Program• Exclusive Employee Discount ProgramAmerica’s Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names America’s Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why America’s Tire At America’s Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at America’s Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first America’s Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, America’s Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first America’s Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.America’s Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make America’s Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.americastire.comAmerica’s Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Full Time
10/22/2024
Irvine, CA 92606
(24.1 miles)
Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Tool and Die Maker candidates to join our team in Irvine CA!Pay: $44.70 - $45.74/hour plus Shift Premium (if applicable)At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Tool and Die Maker, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Performing work requiring a strong competency in Toolroom milling, turning, surface/inner/outer diameter grinding, honing, hand blending, and polishing of deep cavity forming dies.Using Bridgeport style vertical mills, surface grinders, Toolroom lathes, ID/OD grinders, hone, comparators, Toolroom microscope, micrometers, etc.Assisting in designing, constructing, machining, assembling, modifying, adjusting and troubleshooting dies, fixtures, mechanical equipment, and developmental devices to specific tolerances and specifications.Working closely with peers and other coworkers to maximum productivity at production equipment and developing and improving tooling and processes to reduce costs and increase efficiencies.Knowing, applying and evaluating operating principles and mechanical functions used in precision fabrication and building of tools such as punches, dies, jigs, and fixtures.Ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Possess a High School Diploma/GED or higher (complete prior to start)Minimum of three (3) years of tool room experiencePossess a metallurgical background and working knowledge of carbides, tool steels, and alloysFamiliarity with rubber and plastic machiningAbility to work overtime, weekends, or holidays as neededAbility to work either a first, second or thirdshift (depending on shift availability).Additional qualifications that could help you succeed even further in this role include:Experience with heat treatment processes, transfer presses, and progressive dies is strongly preferredTrained and experienced in a variety of mechanical and non-mechanical tasks and/or duties as well as proficient in use of more sophisticated shop tools.Ability to use machines and measuring devices (e.g., lathes, surface grinders, ID/OD grinders, vertical mills, pantographs, calipers, dial indicators, micrometers, scales, etc.).Ability to maintain close tolerances on tooling modifications. Must be able to read and interpret blueprints and other mechanical drawings required.Ability to analyze processes for possible improvements. Must have ability and knowledge to provide direction and support to Apprentice Tool and Die Makers.Understanding of Trigonometry and apply to daily tasks such as determining angles, radiuses, and lengths. Position normally requires minimum of 8 years to meet basic experience level. Total time encompasses all work history.Experience with: Maintenance, Systems, Technician, Electro Mechanic, Mechanic.Work location: Onsite - 2111 McGaw Ave, Irvine CA 92614Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $44.70, with the potential to reach $45.74 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.
Full Time
11/9/2024
Anaheim, CA 92808
(16.5 miles)
CNC Lathe Machinist – 2nd shift Mon-Fri 3:30pm-12:00amPay Range $26-$28+/hour + plus 12% shift differentialHiring ImmediatelyMake Your Mark. Shape Your Future.It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of 54,000+ professionals in 60 countries who are making their mark on some of the world’s most beloved brands, including DEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more.What You’ll DoAs a CNC Machinist, you’ll be part of our team located in Fullerton, CA. You’ll get to: Manufacture products in accordance with engineering drawingsCheck product dimensions utilizing proper equipmentRecord, as required, all productivity on company systemClean and maintain machinery according to department and company standards.Who You Are You always strive to do a good jobbut wouldn’t it be great if you could do your job and do a world of good You care about quality – at every level. You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. In fact, you embrace it. You also have: 5+ years of operation experience with CNC Lathes (Takisawa, Okuma, Mori Seiki, Doosan or SWISS)Ability to set-up a CNC lathe (including work holding, kitting of tools, touching off of tools/establishing offsets, reading of manufacturing drawings, and first article buy-off) on FANUC controls.Experience with utilizing a pre-setter off line for tool offsets Experience with quick change tooling Experience with macro programming and Mastercam or other major programming softwareKnowledge of basic measuring tools, calipers, micrometers, comparators and math requiredSolid understanding of GD&T with ability to read and interpret drawing requirementsWhat You’ll Receive You’ll receive a competitive wage and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Discounts on Stanley Black & Decker tools and other partner programs.All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)
Full Time
11/6/2024
Placentia, CA 92870
(23.1 miles)
Overview: Are you ready to take your career to the next level Join Beacon Building Products as aLeadership Traineein ourSales & Management Development Programand embark on an exciting journey where you’ll deep dive into operations, sales, and leadership at one of the top distributors of roofing materials and building products in the U.S. and Canada. This is more than just a training programit's your opportunity togain hands-on experienceand dive headfirst into a fast-paced, hands-on experience that will prepare you for a variety of roles.Beacon is aFortune 500 companywith a commitment to putting people first, promoting safety, and striving for a sustainable future. If you're ambitious and eager to grow, this is your chance to thrive in a company dedicated to building a better tomorrow. What you will earn:: Competitive Pay: We make sure that your hard work is recognized. Medical, Dental, and Vision Benefits: Experience the peace of mind that comes with our comprehensive benefits package designed to prioritize your well-being. Employee Stock Purchase Plan (ESPP): Bolster your financial growth. Invest in your future and become a stakeholder by purchasing company shares at a 15% discount twice annually. 401(k) Match: Ensure a secure future with fairmatching of your retirement contributions. Paid Leave: Recharge and find work-life balance, flexible parental leave for quality family time, generous sick leave, and enjoy paid time off, company holidays, and floating holidays to unwind and pursue personal interests. Paid Training and Advancement Opportunities: Open doors to exciting possibilities by engaging in our dynamic learning programs, which include the opportunity to earn valuable certifications. What you will do:: Gain operational experience and strengthen leadership skillsGrow knowledge of product lines, logistics, and inventory managementWork alongside the team to understand customer focus, pricing, professional selling, dispatch, and the scheduling of vehicle maintenanceShadow management, gaining hands-on experience in cycle counts, inventory reporting, and management debriefsInteract and learn from successful leaders throughout Beacon What you will bring:: Bachelor's degree from an accredited institution, completed within the last 2 years, is required by the program's January 2025 start dateSpanish bilingual proficiency a plusDesire and willingness to learn multiple facets of the businessAbility to travel overnight, less than 10%
Full Time
10/29/2024
Signal Hill, CA 90755
(41.5 miles)
BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!We are a culture of family.Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law. Application Duration: To ensure a thorough and fair selection process, we would like to inform you that the application deadline for this position is 11/28/2024. Please ensure that your application is submitted by this datefor consideration. To be considered for this position, you must complete the online application located at www.goblusky.com/careers.
Full Time
10/29/2024
Rancho Cucamonga, CA 91730
(17.1 miles)
Consolidated Precision Products (CPP), a manufacturer of highly complex aerospace castings is seeking a Welderto join the team at our plant in the Rancho Cucamonga location. We are looking for a motivated and driven individual that can drive execution in a diverse, challenging environment. ESSENTIAL JOB FUNCTIONS/DUTIES • Ability to weld by method of GTAW for rework, repair and cosmetic upgrade in accordance with customer specifications and internal procedures. • Evaluate castings to ensure preparation from prior operation is adequate. • Assess the condition of the castings to determine weld technique. • Perform additional weld preparation with the use of die and belt grinders. • Operate and maintain welding machines and equipment. • Ability to document weld locations and dimensions. • Responsible for adherence to all safety policies, practices and procedures. • Ability to work overtime • Attendance/Reliability To perform the Welder job successfully, an individual must be able to perform each essential responsibility satisfactorily. These requirements are representative, but not all – inclusive, of the knowledge, skill, and ability required of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications: Education: High School Diploma or General Education Degree (GED) Preferred; Weld TestExperience: Formal training or classes a plus.Certifications/Licenses: Must successfully complete CPP ProceduresOther Required Knowledge, Skills & Abilities: LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, simple drawings, procedure manuals and Internal Method Sheets (IMS).Ability to speak effectively and interact with other team members, engineers and leadership. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to deal with problems involving several concrete variables in standardized situations. REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Salary: $25 - $35an hour Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANSThis is a non-management positionThis is a full time position
Full Time
11/12/2024
Mission Viejo, CA 92691
(22.5 miles)
5335 Paseo Del Norte, Carlsbad, CA 92008Automotive Technician Experience is REQUIRED, Family-Owned! $300 to $2,000 Signing Bonus! Unlimited Income!$30 to $40/Hour Based on Experience!Productivity Bonuses!Premier Chevrolet of Carlsbad, CA is Family-Owned and a GREAT place to have a Rewarding Career! Our High-Volume Service Department needs to hire Automotive Technicians to perform vehicle repairs and maintenance. Auto Tech experience, from any brand, is REQUIRED. Earn an UNLIMITED INCOME with OVER 100% PRODUCTIVITY! Apply now drive your career forward with our growing company!Premier is a successful dealer group with 40 stores and sales surpassing TWO BILLION DOLLARS! We appreciate our employees, invest in their success, and give back to our community with our “Giving Hope Foundation”.We Provide Excellent Benefits:$300 to $2,000 Signing Bonus Based on Experience and Certifications!$30 to $40/Hour Based on Experience!Productivity Bonuses!Medical, Dental and Vision Insurance401(k) with Company Match!Paid time offPremium ongoing professional developmentGreat work environment!Employee programs for referral bonus and auto purchasesPaid participation in Giving Hope Community Service days givinghopenola.orgFind more information on our benefits and career paths at WhyPremierAutomotive.comResponsibilities - Automotive Technician:Perform vehicle inspections, diagnostics, repairs, maintenance, recall work, and installations according to experience and certificationsAutomotive service includes engine, transmission, electrical, steering, suspension, brakes, heating, A/C, exhaust system, and more, that meets dealership and manufacturer standardsKeep shop area neat/clean and account for toolsOther duties may be assigned according to expertise and certificationsRequirements - Automotive Technician:Automotive Technician experience is REQUIREDCertified Technicians preferredValid driver's license and acceptable driving recordExperience with the latest automotive technologies and working knowledge of shop equipmentReliable with a good work ethic and a positive attitudeA positive attitude and works well as part of a teamWe are an Equal Opportunity Employer
Full Time
11/12/2024
Mission Viejo, CA 92690
(24.8 miles)
5331 Paseo Del Norte, Carlsbad, CA 92008Automotive Technician, Mechanic Required: Auto Repair Experience$300 - $2,000 Signing Bonus! Unlimited Income!$30 to $40/hour Flat RateWe Guarantee Your Hours for 90 Days!Productivity Bonuses! Excellent Benefits!Premier KIA of Carlsbad, CA is family-owned and a GREAT place to have a Rewarding Career! Our High-Volume Service Department is seeking EXPERIENCED Automotive Technicians to perform vehicle repairs and maintenance. Auto Repair Tech experience is REQUIRED from any brand. KIA and Dealership experience is preferred. Earn an UNLIMITED INCOME with OVER 100% PRODUCTIVITY! Apply now for this great opportunity to join our team!We are part of the super successful and family ownedPremier Auto Dealer Group! We appreciate our employees, invest in their success, and give back to our community with our “Giving Hope Foundation”.We Provide Excellent Benefits:$300 - $2,000 Signing Bonus Based on Experience and Certifications!$30 to $40/hour Flat RateEarn Unlimited Income with Over 100% Productivity!We guarantee your hours for 90 days!We Will BEAT Your Current Pay! Bring your pay stub to the interview.Productivity Bonuses!Medical, Dental and Vision Insurance401(k) with Company Match!Paid time offInstant vacation after 6 months!Premium, ongoing professional developmentGreat work environmentEmployee programs for referral bonus and auto purchasesPaid participation in Giving Hope Community Service days givinghopenola.orgFind more information on our benefits and career paths at WhyPremierAutomotive.comResponsibilities - Experienced Automotive Technician:Perform vehicle inspections, diagnostics, repairs, maintenance, recall work, and installations according to experience and certificationsAutomotive service includes engine, transmission, electrical, steering, suspension, brakes, heating, A/C, exhaust system, and more, that meets dealership and manufacturer standardsKeep shop area neat/clean and account for toolsOther duties may be assigned according to expertise and certificationsRequirements - Experienced Automotive Technician:REQUIRED: Automotive Repair Technician experienceKIA & Dealership Tech, Mechanic experience is preferredCertified Technicians preferredValid driver's license and acceptable driving recordExperience with the latest automotive technologies and working knowledge of shop equipmentReliable with a good work ethic and a positive attitudeA positive attitude and works well as part of a teamWe are an Equal Opportunity Employer
Full Time
11/6/2024
Temecula, CA 92590
(31.2 miles)
5550 Paseo del Norte, Carlsbad, CA 92008 Experienced GM Certified Technician At Least 2 Years' Dealership Experience is Required$30 - $45 Per Hour!!$500 - $3,000 Signing Bonus!TOP Pay! Productivity Bonus! Relocation Assistance to Carlsbad, CA!Premier Buick GMC Cadillac in CARLSBAD, CA is a great place to have a rewarding career! Our High-Volume Service Department needs to hire an experienced GM CERTIFIED TECHNICIAN to repair complex General Motors Automotive systems including engine, transmission, electrical, and more! At least two years of GM Certified Technician experience in a dealership is required.You'll have ampleopportunities to maximize your income and reach unlimited earning potential! Plus, we have a generous productivity bonus!We are part of the super successful and family-owned Premier Automotive Dealer Group. Apply now for this great opportunity to drive your career forward with our growing organization! Give us one interviewand you'll see Premier goes above and beyond to ensure your financial success!Why is Premier so special Check outWhyPremierAutomotive.comResponsibilities - Experienced GM Certified TechnicianInspect vehicle, diagnose problems, repairengine, transmission, electrical, steering, suspension, brakes, air-conditioning, and more, in accordance with manufacturer standardsPerform other duties as neededKeep shop area neat/cleanRequirements - Experienced GM Certified Technician:At least 2 years' GM Certified Technician experience in a dealership is requiredValid driver's license and acceptable driving recordBasic computer skills, a good work ethic, and a positive attitudeReliable and works well as part of a teamWe Provide Excellent Benefits:$30 - $45 Per Hour! $500 - $3,000 Signing Bonus Based on Experience and Certifications!TOP Pay! Productivity Bonuses!Medical, Dental and Vision Insurance401(k)with Company Match!Paid time offPremium ongoing professional developmentGreat work environmentEmployee programs for referral bonus and auto purchasesPaid participation in Giving Hope Community Service days givinghopenola.orgFind more information on our benefits and career paths at WhyPremierAutomotive.com
Full Time
10/27/2024
Riverside, CA 92508
(7.1 miles)
About job:Tuition ReimbursementBenefits eligible within two weeks of employmentCurrently hiring for below shifts:L3 Wed-Sat 9pm-7:15 amAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and suppliesCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceIDID60512Job ClassificationsJob Classifications49-9071 - Maintenance and Repair Workers, General (US Standard Occupational Classifications (SOC)-United States of America)6 - Craft Workers (EEO-1 Job Categories-United States of AmericaFind competitive benefits from financial and education to well-being and beyond at .Target will consider for employment qualified applicants with criminal histories in a manner consistent with the San Francisco and City of Los Angeles Fair Chance Ordinances.Americans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.
Full Time
10/14/2024
San Bernardino, CA 92408
(17.6 miles)
Promotes workplace efficiency and profitability through the maintenance, inspection and repair of facility, equipment and machinery. Do you love. . . ensuring efficiency by maintaining the quality of equipment and machinery Are you energized. . . by sharing your expertise to help others problem solve Do you enjoy. . . working as a team to accomplish a common goal **Hiring for:Tuesday - Saturday, 5:00PM - 1:30AM**Start of pay range is $23.15 + $2.00 shift premium for Weekend ShiftACCOUNTABILITIESEFFECTIVE INSPECTION AND REPAIR OF EQUIPMENTDaily inspection and repair of all conveyor systems and strappersRoutine inspection, preventative maintenance and maintenance of air compressors, compactors, boilers and cardboard conveyorRegular maintenance and repair on all housekeeping, power and material handling equipmentPerform inspection and repair of fire protection equipmentQUALITY MAINTENANCE AND UPKEEP OF FACILITYPerform minor electrical/plumbing repairs, painting and office furniture movesRoutine maintenance of heating and air conditioning unitsMaintain lighting throughout the facilitySort/stack/load pallets, cardboard, aluminum, steel and light bulbs for recyclingSet up/take down meeting roomsUpkeep of yard area, fence repair, snow removal/saltingEFFECTIVELY COMMUNICATE WITH TEAM MEMBERS AND OUTSIDE VENDORS TO ACHIEVE A COMMON GOALAssist outside contractors to perform various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesQUALIFICATIONSREQUIREDBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentComply with all MSDS standards and lock out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning/disinfecting solutions, oil and equipment according to MSDS procedureAdhere to company policies and proceduresBasic math and reading skills and legible handwritingAbility to work as part of a team and interact effectively with othersAbility to perform tasks consistently and accuratelyRegular attendanceSPECIAL REQUIREMENTSPhysical activity may include time standing/walking up to eight hours with scheduled breaks. Ability to work in a multi-level environment, including climbing stairs, bending, twisting, stepping, stooping, reaching, lifting and pushing on a frequent basisAbility to lift up to 60 pounds on a frequent basis and 100 pounds on occasion with assistanceMay be required to take a drug screenPay Range: $0.00 -Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).
Full Time
10/16/2024
Long Beach, CA 90815
(38.7 miles)
Avionics Electronics Technician IIin GAC Van NuysUnique Skills:The compensation range for this role is:$35.19 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223189Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
11/6/2024
Los Angeles, CA 90040
(40.9 miles)
Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Field Service Technician installs, commissions, monitors, troubleshoots, and repairs Flowserve’s pumps, seals, and other equipment across industries such as oil and gas, chemical, nuclear, coal, and wastewater industries, depending on customer engagement. In this challenging position, the Field Service Technician (FST) provides real-time technical support to our customers and provides recommendations for repairs, upgrades, and replacement equipment. The FST is actively engaged in troubleshooting problems and implementing solutions onsite at nearby customer facilities. Our Field Service Technician team is the face of Flowserve, and we count on them to deliver a world-class service to our customers, creating a lasting competitive advantage for our products and services. Responsibilities: Make direct, in-person service calls in response to customer requests.Assess mechanical problems and take actions to resolve promptly.Work side-by-side with our customer’s personnel, and lead work crews as required.Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly.Ensure that equipment is installed successfully and on schedule.Check equipment prior to start-up and assess start-up performance.Monitor the maintenance and performance of Flowserve equipment.Train customers in the proper procedures for operating and maintaining Flowserve products.Collaborate effectively with the supporting organizations of Flowserve, including the repair centers, customer service, and sales engineering.Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged.Knowledgeable about the industrial applications and operations of pumps, valves, seals, actuators, and mechanical equipment.Communicate by word and actions Flowserve’s values for ethics, safety, and qualityOther duties as assigned. Requirements: 8+ years of relevant experienceExperience in the nuclear industryExperience with installing mechanical equipmentExperience with repairing pump equipment, installing mechanical seals, changing seal faces/gaskets/O ringsProven ability to correctly read and interpret blueprints, engineering drawings, and schematicsMust be a self-starter with good follow-through, capable of working independently with little supervisionProficiency in Outlook, Word, and ExcelAn active driver’s license with a good driving record is essential to the roleAble to travel, including globally, for extended periodsAble to work overtime as required to minimize impact on customersPhysical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round. Preferred Experience / Skills: High School Diploma / GEDProfessional certifications in this field.Ability to work collaboratively with unfamiliar teams.Excellent communication skillsGood organizational skills The pay range for this position is 42.46 - 63.72 USD Hourly Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-12131 Job Family Group : Operations Job Family : OP Field Service EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.
Full Time
11/9/2024
Mission Viejo, CA 92692
(22.1 miles)
Overview: OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with America’s Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At America’s Tire, we commit to growing our employees and routinely promote from within.Part-Time100% On SitePay Starting at $18Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at America’s Tire performs the following duties, including but not limited to:• Install new tires and wheels• Perform maintenance on tires, including rotations, balancing, repairs, and cleaning• Rewarding Career Path to Management• Follow safety guidelines and best practices• Participate in hands-on, on-the-job training• Provide a world-class customer service experienceWhat We’re Looking For:• Must have an upbeat outlook• Must be dedicated and reliable• Must be coachable and trainable• Must be able to lift a minimum of 50 lbs.• Must enjoy and excel in a team environment• Must be able to function well in a physically demanding environmentWhat We Offer:America’s Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:• Paid Training• Competitive Pay• Weekly Paychecks• 401(k) Retirement Plan• Employee Referral Bonus• Employee Assistance Program• Educational Assistance Program• Exclusive Employee Discount ProgramAmerica’s Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names America’s Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why America’s Tire At America’s Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at America’s Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first America’s Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, America’s Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first America’s Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.America’s Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make America’s Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.americastire.comAmerica’s Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Full Time
10/22/2024
Irvine, CA 92606
(24.1 miles)
Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Electro Mechanic A candidates to join our team in Irvine CA!Starting Pay: $42.80 - $43.82/hour plus Shift Premium (if applicable)At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs an Electro Mechanic A, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Troubleshooting and repairing mechanical equipment and components, pneumatic and hydraulic equipment, and web handling systems.Performing preventive maintenance, basic machining, pipefitting and millwright tasks and welding and fabrication tasks.Installing and upgrading equipment and maintaining pumps.Troubleshooting, diagnosing, and repairing electrical and electronic equipment and components,Maintaining and troubleshooting power and distribution systems.Programming and troubleshooting using programming devices.Operating a personal computer (Load/remove programs, creating and modifying spreadsheets, databases for historical trending, word processing databases).Ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Possess a High School Diploma/GED or higher (complete prior to start).Minimum of six (6) months manufacturing experience.Minimum of four (4) years mechanical/electrical equipment maintenance experienceAbility to work overtime, weekends, or holidays as needed.Ability to work either a first, second or thirdshift (depending on shift availability).Additional qualifications that could help you succeed even further in this role include:Two-year (2) technical degree or, technical knowledge and practical application skills in mechanical, electrical, or electronics disciplines at a level normally acquired through formal training in two-to-four years of vocational education and/or as part of an established apprenticeship program.Knowledge and skills of mechanical concepts at a level required to install, maintain, troubleshoot and repair industrial equipment and devices.Knowledge and skills of Electrical concepts at a level required to install, maintain, troubleshoot and repair industrial equipment and devices.Experience with maintenance, systems, technician, electro mechanic, or mechanic.Work location: Onsite - 2111 McGaw Ave, Irvine CA 92614Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.
Full Time
11/7/2024
Riverside, CA 92504
(3.9 miles)
KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment
Full Time
11/12/2024
Laguna Niguel, CA 92677
(28.2 miles)
5331 Paseo Del Norte, Carlsbad, CA 92008Automotive Technician, Mechanic Required: Auto Repair Experience$300 - $2,000 Signing Bonus! Unlimited Income!$30 to $40/hour Flat RateWe Guarantee Your Hours for 90 Days!Productivity Bonuses! Excellent Benefits!Premier KIA of Carlsbad, CA is family-owned and a GREAT place to have a Rewarding Career! Our High-Volume Service Department is seeking EXPERIENCED Automotive Technicians to perform vehicle repairs and maintenance. Auto Repair Tech experience is REQUIRED from any brand. KIA and Dealership experience is preferred. Earn an UNLIMITED INCOME with OVER 100% PRODUCTIVITY! Apply now for this great opportunity to join our team!We are part of the super successful and family ownedPremier Auto Dealer Group! We appreciate our employees, invest in their success, and give back to our community with our “Giving Hope Foundation”.We Provide Excellent Benefits:$300 - $2,000 Signing Bonus Based on Experience and Certifications!$30 to $40/hour Flat RateEarn Unlimited Income with Over 100% Productivity!We guarantee your hours for 90 days!We Will BEAT Your Current Pay! Bring your pay stub to the interview.Productivity Bonuses!Medical, Dental and Vision Insurance401(k) with Company Match!Paid time offInstant vacation after 6 months!Premium, ongoing professional developmentGreat work environmentEmployee programs for referral bonus and auto purchasesPaid participation in Giving Hope Community Service days givinghopenola.orgFind more information on our benefits and career paths at WhyPremierAutomotive.comResponsibilities - Experienced Automotive Technician:Perform vehicle inspections, diagnostics, repairs, maintenance, recall work, and installations according to experience and certificationsAutomotive service includes engine, transmission, electrical, steering, suspension, brakes, heating, A/C, exhaust system, and more, that meets dealership and manufacturer standardsKeep shop area neat/clean and account for toolsOther duties may be assigned according to expertise and certificationsRequirements - Experienced Automotive Technician:REQUIRED: Automotive Repair Technician experienceKIA & Dealership Tech, Mechanic experience is preferredCertified Technicians preferredValid driver's license and acceptable driving recordExperience with the latest automotive technologies and working knowledge of shop equipmentReliable with a good work ethic and a positive attitudeA positive attitude and works well as part of a teamWe are an Equal Opportunity Employer
Full Time
11/6/2024
Long Beach, CA 90815
(38.7 miles)
Avionics Electrical Technician Srin GAC Van NuysUnique Skills:Van Nuys - Flex Team SecondShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223069Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
11/6/2024
Long Beach, CA 90815
(38.7 miles)
Avionics Electrical Technician Leadin GAC Van NuysUnique Skills:Van Nuys2nd Shift positionThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience on large/mid-size aircraft. 8 years experience in aircraft avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and six (6) years related experience. FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. FCC license or NCATT certification preferred. Position Purpose:Plans and coordinates all electrical/avionics activities and provides customers with daily information on aircraft schedules, repairs, parts, components shipped to vendors, etc. Works with hangar management to coordinate electrical/avionics activities and schedule aircraft requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plans, schedules, and completes tasks on work authorizations in order to meet the master schedule. Provides daily status reports and progress schedules to management. . Coordinates efforts of Electrical and Avionics activities to meet aircraft schedules and deadlines. Reviews work, including forms and records, to ensure compliance with Site Inspection Procedures Manual, Site Operating Procedures and FARs. . Supervises and instructs electrical technicians with technical guidance and proper procedures of troubleshooting electrical/avionics systems, routine inspections and preventive maintenance. Provides input to subordinate performance appraisals and submits them to management for review. . Reviews daily job charging for all personnel (including support groups) to ensure accuracy of inputs. . Maintains a preventive maintenance program on test equipment, hand tools, and special tools. Maintains a current knowledge of Aircraft Service Changes (ASC), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Supervises a continuous safety program in hangar area which includes operation of support equipment, aircraft systems and general housekeeping. Maintains required. logs and records. Enforces the company FOD, tool control, 5-S programs and all safety regulations. . Able to adapt to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Establishes and fosters an environment of innovation and Lean oriented thinking. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must have thorough knowledge of aircraft systems, troubleshooting, technical manuals systems, and aircraft maintenance records system. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret electrical/avionics system drawings and blueprints. Must have demonstrated leadership ability. Excellent communication skills, both verbal and written. Demonstrated ability to plan, organize, implement and obtain objective with minimal direction. A good understanding of PC, Windows and main frame computer applications including the use of standard computer word processing programs (i.e. Microsoft Word) and appropriate typing skills a plus. Must be able to climb ladders and stairs, work in small-space restricted area, and lift up to 100 pounds. Ability to use hand tools and avionics test equipment. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223041Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
10/29/2024
Long Beach, CA 90815
(38.7 miles)
Aircraft Technician Srin GAC Van NuysUnique Skills:Van Nuys - Flex Team SecondShiftThe compensation range for this role is:$39.38 - 43.53 per Hour Final compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222860Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
11/6/2024
Long Beach, CA 90815
(38.7 miles)
RS Avionics Electrical Technician IIin GAC Van NuysUnique Skills:Day Shift - Van NuysThe compensation range for this role is:$35.19 - 38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221481Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
10/24/2024
Long Beach, CA 90815
(38.7 miles)
Mechanical Team Lead A&Pin GAC Van NuysUnique Skills:Up to $5000 Sign on bonusGulfstream experience preferredThe compensation range for this role is:$44.13 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and locationEducation and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222016Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
11/6/2024
Long Beach, CA 90815
(38.7 miles)
Airworthiness Inspector Sr A&Pin GAC Van NuysUnique Skills:1th Shift - Monday thru Thursday. Must be willing to support aircraft on road trips and at other sites. Able to work in an extremely fast paced environment. Must be Proficient with Computers and tabletsThe compensation range for this role is: $44.14 to $48.78 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223566Category: Quality AssurancePercentage of Travel: Up to 50%Shift: FirstEmployment Type: Full-timePosting End Date: 02/28/2025Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
11/6/2024
Long Beach, CA 90815
(38.7 miles)
Aircraft Technician II - Van Nuysin GAC Van NuysUnique Skills:Multiple shifts (Nights/4th/5th)The compensation range for this role is:$35.19 - $38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223556Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
Full Time
11/13/2024
Long Beach, CA 90815
(38.7 miles)
Interior Install Tech Srin GAC Van NuysUnique Skills:Must be willing to work any shiftThe compensation range for this role is: $35.20 to $38.90 per HourFinal compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional InformationRequisition Number: 222228Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.