Repair Station Aircraft Component Repair Tech IIin GAC SavannahUnique Skills:Understanding of Gulfstream Cabin Management System architecture preferred. Must be willing to work second shift or weekends.Education and Experience RequirementsHigh School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose:Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Maintain and utilize all required. paperwork in accordance with FAA RS requirements. Maintain a clean and orderly work area. Comply with all company and legislative environmental health and safety regulations.Additional Functions: Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . Assist with training and instructing of Acft Component Repair I Techs. . Resolves routine questions and problems, referring the more complex issues to higher levels. .Perform other duties as assigned.Additional InformationRequisition Number: 223454Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/13/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive base salary and a comprehensive bonus program.Three weeks paid vacation in a calendar year/holidays/sick time/three PTO days in a calendar year.Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one. Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyProviding Scheduling and management support.JCI Employee discount programs (The Loop by Perk SpotWhat you will doUnder general direction, general direction, acts as the on-site project leader to plan, execute, and complete control systems projects with assigned customers.Performs or delegates tasks as required to execute and fully complete assigned projects including hardware design, system programming, installation coordination, system and network commissioning and project closeout. Responsible for the overall financial results of assigned projects including costs, project billings, and collections. Maintains an effective balance between customer satisfaction and project financial results. Actively pursues selling change orders. Coordinates communication with the customer during all phases of the project. Ensures proper execution of warranty. How you will do itProvides work direction to subcontractors, electrical installers, technicians, designers, and administration as necessary.Ensures work performed follows state, local and Federal legal requirements and operates on the job with the highest of ethics.Adheres and ensures Johnson Controls staff and subcontractors adhere to all safetyWhat we look forRequiredTechnical Associates Degree with two years of field experience or four years of equivalent related field experience in the building automation industry, programming panel controls preferably HVAC equipment.Experience managing projects.Must have the ability to communicate technical material to a non-technical audience.Must demonstrate the ability to perform work independently.Strong computer skillsPreferredExperience in the HVAC industry, programming controls.Two plus years of Project Management experience.Knowledge of project accounting, costing principals.Relevant technical hands-on experience in systems design and commissioning of digital HVAC controls systems.

Req ID:449032Address: 8436 Ford Ave. Richmond Hill, GA, 31324Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Overview: ConGlobal is the industry-leading provider of intermodal rail terminal services, auto loading and unloading and container depot services. We take pride in consistently delivering superior and reliable service, a broad scope of services and an exemplary safety record. We’re currently seeking a Chassis Repair – Maintenance TechnicianChassis Repair – Maintenance Technicians are charged with repairing containers, trailers and chassis. Repair & Replacement work includes but is not limited to; containers, lights, tires, landing legs, brakes and framework. Responsibilities: Chassis Repair – Maintenance TechnicianConducts routine/scheduled maintenance on railroad leased/owned containers and chassisRepairs equipment in accordance with railroad, IEP, manufacturer & FMCSA guidelinesDocuments repairs according to an established reporting system; verbally and in writingRepairs tires, brakes, lights, landing leg and frameworkPerforms light welding when requiredOther duties as assignThis is an exciting time at Conglobal and we’re seeking individuals to join our growing team! We offer full time employees the following; competitive compensation, benefits, 401K & vacation. Qualifications: Minimum of 3-years verifiable mechanic experience inANYindustryAbility to lift in excess of 50lbsOpen availability (24/7/365)Willingness to work in varying weather conditionsMust have own hand toolsValid Driver’s LicenseMust be willing to complete a drug screen, physical and background check

Overview: MB AUTOMOTIVE MECHANICS CONSIDER A CAREER HERE!INDUSTRY LEADING PAY, PLUS BONUSES!WORK AND LIVE IN A GREAT PLACE!We are MERCEDES-BENZ OF HILTON HEADis part of the fast-growing Group 1 Automotive, a leader in automotive retail and service. We are growing and need to add Sprinter Technician/Mechanic,to our team! Are you an experienced Sprinter Technician ready to advance your career Are you ready to work in a Technician focused environment with all the tools and support to maximize your earnings potential If you answered yes than we want to meet you! You have several ways to apply so apply now!Our Sprinter Technician/Mechanic should be passionate about customer service, take pride in their work, an enjoy being part of a winning team that cares about their employees.In addition to competitive pay, we offer our associates the following benefits:Relocation Package Contingent on ExperiencePaid TrainingA Great Working Environment with the Latest EquipmentContinuous Job Training and Career Advancement OpportunityStructured, Self-paced and Paid Training OpportunitiesManufacturer and Group 1 RecognitionHealth, Dental, Vision Insurance,Life and Disability Insurance401(k) with company match,Paid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanWhat we Look for:Previous Sprinter Van Technician experienceNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance preferred.Strong focus on achieving a great customer service experienceHigh attention to detailWhat you will do:Efficient and accurate work in accordance with dealership’s and factory standardsComplete system diagnostics and full automotive troubleshooting and testingRoad-test vehicles to ensure quality workMaintain an organized shop areaCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesYou needA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s License and Driving RecordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of Integrity, Transparency, Professionalism, Teamwork and Respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* We are an Equal Employment Opportunity EmployerIND1#JP1#LI-JP1

Are you looking for an opportunity to work in the dynamic world of retail merchandising SAS Retail Services is currently seeking Retail Reset Merchandisers to join our team. As an SAS Retail Services Merchandiser, you will play a crucial role in enhancing the shopping experience for customers within the nationwide Kroger family of brands. You will utilize your basic merchandising skills to reset shelves, tag products, build eye-catching displays, ensure product facing, and rotate stock efficiently. Your keen eye for detail will be essential in maintaining the visual appeal of the grocery stores, ensuring products are well-presented, and displays are aesthetically pleasing.What you get:Competitive wage; $15.00 per hourA healthy work-life balance with no nighttime or weekend commitmentsAdditional hours may be available upon requestPaid training, equipping you with the necessary skills and knowledge to excel in your rolePaid mileage and travel reimbursement when applicableWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and online discountsNow, about you:You’re18years or olderHave reliable transportation and a valid driver’s license You enjoy physical work of moving, bending, standing, squatting and can lift up to 50 lbs. Are open to visiting multiple stores in a weekHave excellent communication skills to effectively interact with team members, store staff, and customersClick video link hereto see our team in action.If you are passionate about retail, have a great eye for detail, and enjoy creating visually appealing displays, we invite you to apply to this opportunity. Join us at SAS Retail Service and be a part of a dedicated team committed to delivering exceptional merchandising services to our clients’ customers.Click Apply Now to start your rewarding journey with SAS Retail Services!

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Automotive Technician NON CDL Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team in Seattle, WA. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. The current available shift is?6:00pm- 2:30am. ?Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The hourly pay for this position is $38.43 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

About the RoleIn this role, you will be responsible for the cleaning and maintenance of all store areas in accordance with Kohl’s procedures, guidelines, and methods. You will ensure a safe and clean environment for customers and associates by performing daily store cleaning, maintenance and in-store repair tasks.What You’ll DoDrive sales by providing an inspiring environment and clean sales floor that motivates customers to add to their basketClean all areas of the store (i.e. floors, windows, restrooms, trash receptacles) in accordance with Company procedures, guidelines, methodsMaintain appropriate levels of Company approved chemicals and supplies needed to ensure a safe and clean environment, ensure that chemical supplies are rotated and stored in proper containers in preparation for their use, and place orders to replenish when supplies are lowRemain up to date on required training for chemicals, equipment, and maintenanceUtilize store provided tools to routinely complete basic maintenance and perform general repairs including, without limitation: replacing burned out light bulbs, stained ceiling tiles, soap dispensers, toilet paper holders, and corner guards as needed; repairing shopping carts, fitting room and restroom hardware, and making minor flooring repairs; minor drywall patching and paintingEffectively use Kohl's tools and technology to plan, communicate and share information with the teamReport any repairs that will need outside vendor support to a manager at the store, so they can submit a work ticket in eSupportEngage customers by greeting them and offering assistance with products and services All associate roles at Kohl’s are responsible for:Acting with integrity, honesty and fostering teamwork in an engaged and inclusive cultureExercising good judgment and discernment when making decisions; taking appropriate partners as neededDemonstrating a customer service mindset, anticipating customer needs and satisfactorily resolving issuesMeeting or exceeding individual goals (e.g., productivity, credit, loyalty)Accomplishing multiple tasks within established timeframesFollowing company policies, procedures, standards and guidelinesMaintaining adherence to company safety policies for the safety of all associates and customersReceiving, understanding and proactively responding to direction from supervisors/managers and other company personnelOther responsibilities as assignedWhat Skills You HaveRequiredMust be 18 years of age or olderVerbal/written communication and interpersonal skillsFlexible availability, including days, nights, weekends, and holidaysPreferredPrior education or experienceFamiliarity with general maintenance tools and tasksRetail or service industry experiencePay Starts At: $15.25

Flight Test Senior Avionics/Electrical Technicianin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 222002Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/02/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Our employees are the most important part of our business. Thank you for your interest in applying to new opportunities with us.What you will doWe are looking for a skilled Journeyman Chiller Mechanic TTL (Technical Team Leader) who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of 5 years’ Chiller experience, with knowledge of maintenance procedures, trouble shooting and installation of equipment of all brands. Assists branch leadership with coaching and mentoring of branch technicians with the delivery of customer satisfaction and following operational processes. Providing Level 1 technical support and assist with technical development for others. Ensures work is being performed in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics. How you will do it You will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs to prolong the equipment life cycle of our customers’ equipment. You will establish and maintain a positive relationship with customers, vendors, and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed as well as coaching and mentoring other HVAC Mechanics in quoting.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing, and repairing equipment and systems at customer’s location. You will be required to use cutting edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment. You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear, and conditions. You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires.Four-to-six-week cycle for all on-call rotation since we are a 24/7 service company. What we look for Required: Universal Refrigeration and Air Conditioning Systems CFC. Certification is required.Experience/factory training on various Water and Air cooled Chillers with emphasis on York, Carrier, Trane and Daikin.Operating knowledge of Microsoft office software and working proficiency with hand-held computer (i.e., Smartphone, iPad)Adherence to company safety programValid driver's license,Good verbal and written communication skills and ability to lead a team of 6-12 Mechanics.Must be able to be on call nights and weekends on a Four-to-six-week cycle rotating basis.At least 5 years of commercial, industrial, and/or institutional experience with all types of HVAC systems, various compressor technologies, HVAC control systems, and speed drives as well as leadership experience in managing small technical teams.#TechHiring

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:Previous G700 mechanical systems experience preferred . This is a weekend shift position.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223406Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/11/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

What you will doThis position will be responsible for the installation of complex integrated security systems to include the wiring, equipment and programming of access control systems, CCTV, digital recorders, network recorders, and intercom systems for clients.How you will do itCapable of installing cabling, field equipment & control equipment enclosures in customer locations according to the national electric code, company and customer guidelines.Can use electronic test equipment to troubleshoot complicated problems during installation.Reads and interprets blueprints, diagrams, submittals, specifications, software/systems programs, schematics and operational product manuals.Readjust equipment, repair or replace inoperative equipment and test for operationPerforms system checks for proper operation.Knowledge of computer programs including word processing, spreadsheets and databases; CCTV and access control systems; media storage.Ability to plan, organize and prioritize work paying close attention to details.Ability to communicate effectively, orally and in writing, while establishing and maintaining cooperative working relationships.Ability to analyze information.Can work unsupervised to complete installation jobs and is self-motivated to complete jobs.Completes and submits all necessary paperwork related to job assignments.Capable of using hand and power tools to properly mount and secure equipmentFeed cables through access holes, roof spaces, and cavity walls to reach fixture outlets; then position and terminate cables, wires and strappingDrill holes for wiring in wall studs, joists, ceilings, and floors.Conduct End- User training.Ability to isolate trouble to a customer network, where applicableAble to be apart of a rotational on call scheduleWhat we look forRequiredHigh school diploma, GED, or equivalent.Significant background (3+ year experience) in Digital & Analog Camera Systems.Significant background (3+ year experience) in Access Control Systems.Understanding of the function and design of Alarm Systems.Experience with IP addressable security devices (2+ years).Must be computer literate to include advanced TCP/IP networking skills.Must be able to operate a company truck with an acceptable driving record.PreferredAssociate Degree or 2-year technical school program graduate preferred.An industry-recognized apprentice training program may be substituted for the formal education requirement.Specialized training/ certification in the following categories:Access Control (at least 3 certifications from the following)ProwatchC-Cure 800 or C-Cure 9000Casi- Facility Commander or Picture Perfect or Secure PerfectCCTV- Analog (at least 1 certifications from the following)BoschPelcoAmerican DynamicsCiscoCCTV- IP (at least 1 certifications from the following)GenetecIndigo VisionVisitor Management (experience in any of the following preferred)Honeywell Lobby WorksStopwareAccess SentryAdditional experience a plus: MCSE, CCNA, Surveillance Systems, Intrusion Detection Systems, Perimeter Intrusion Detection Systems and Security Gate Operators.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/careers.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:Previous G700 mechanical systems experience preferred . This is a weekend shift position.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223406Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/11/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

HVAC Truck Based Senior Controls TechnicianWhat you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization.How you will do itLoading Johnson Controls field and network level controller software.Performing commissioning and system diagnostics for all levels of system controllers as well as enddevices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.What we look forRequired:Strong understanding of HVAC systems, sequence and applicationsDemonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Attention to detail.Good communication and listening skills.(Depending on location, the mounting and termination of low voltage devices may have special licensing requirements.)

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Structural Mechanic IIIin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Q-stamp preferred. Position Purpose:In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule . Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required.Additional Functions: Participate in continuous improvement activities . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment . Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .Perform other duties as assigned.Other Requirements: Basic computer and basic shop math skills. Read and comprehend basic documents and instructions and read a scale. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs. Additional InformationRequisition Number: 223324Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JP1

What you will do Johnson Controls Inc. is looking for forward-thinking talent to join our growing organization. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners and the communities we serve. At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant building automation technologies in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. We are looking for skilled mechanic who has experience with air cooled or water-cooled machines to work with top of the line commercial and industrial equipment. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look for Required Must be a member or willing to join the local Union. Minimum of 3 years of practical working experience on air cooled or water-cooled machines with strong HVAC/ mechanical troubleshooting experience. You may be required to pass a knowledge examination to assess proficiencies. Attention to detail through interpersonal, digital, and written skills. Self-starter with a passion/ desire to learn and apply on the job. Prioritize safety in all forms Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license

Flight Operations Senior Avionics/Electrical Technicianin GAC SavannahUnique Skills:Corporate aircraft experiance requiredEducation and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 222560Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/01/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Equipment Maintenance Tech Srin GAC SavannahUnique Skills:Sr Tech must be able to read electrical Schematics, Be able to trouble Shoot CNC Equipment and Voltages from Control Voltages up to 480 Volt 3 Phase. Must have knowledge of Siemens and Allen Bradley PLC and Drives. Must be able to work all shifts. Shift opening is to be determined according to Vacancy.Education and Experience RequirementsHigh School Diploma or GED required. 5 years experience working with electrical controls and mechanical applications in a manufacturing environment, to include experience working with aircraft related production, equipment in the aerospace industry. 2 year technical degree may offset one year of experience. Position Purpose:Under minimal supervision provides advanced experience with respect to electrical, hydraulic, mechanical, and pneumatic systems for troubleshooting, repairs, upgrades and preventative maintenance to all aircraft related production equipment.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Diagnoses cause of electrical and mechanical malfunction or failure of operational equipment and apply corrective action to resolve re-occurring issues. Proactively conducts Preventive and Predictive Maintenance inspections and performs required. duties in accordance with recommended schedules. Performs repairs and corrective maintenance to equipment with a high degree of quality and reliability so that the equipment is capable of operating within the required. specifications. Performs setup and calibrations on scheduled intervals for all aircraft related production equipment. Regularly performs backups of process parameters and PLC programs for all equipment. Daily input of required. data in CMMS system for machine reliability and control. Ability to implement project objectives on key pieces of automated equipment with minimal guidance. Recommends or initiates modification or replacement of equipment components which fails to meet acceptable operating standards. Submits parts request on critical spares identified as non- stock items.Additional Functions: Interfaces daily with key Management and Production personnel regarding all Automated Equipment. . Assists with Engineering in all acceptance testing and training. .Perform other duties as assigned.Other Requirements: Ability to work any shift. Demonstrated working knowledge of electrical, mechanical, and controls aspects of factory automation systems and the integration of devices used. Knowledge of Programmable Logic Controllers (Allen Bradley & Siemens Controls preferred). Background in CNC Equipment (Mazak, Mori Seiki, Fryer, Alpha Harrison, Broetje, Kuka preferred). Background in GSE Equipment (Hobart, Unitron, Tronair, Lektro Tug preferred). Must be able to read electrical schematics and blue prints. Working knowledge of replacing spindles, ball screws, linear guide ways, bearings, hydraulics repairs, and precision machine alignments (Laser Alignment experience a plus). Experience in the alignment of turrets and the installation of ball screws is a plus. Working knowledge of PC based Microsoft office. Experience with computerized maintenance management software relevant to spare parts management, work order creation, and Preventive Maintenance preferred. Additional InformationRequisition Number: 219137Posting Type: Internal-ExternalDepartment: J0471-FAC GSE AT ManageCategory: FacilitiesPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:n/aEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 222424Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:n/aEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 222424Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Srin GAC SavannahUnique Skills:Multiple shifts available. Must be willing to support flight operations on multiple models of AC. Strong live AC avionics experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 222290Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Upholstery Tech Srin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years experience in upholstery to include two (2) years aircraft upholstery experience or 6 years commercial upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Position Purpose:Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Fabricate and install seat covers, curtains and various assemblies and subassemblies. Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. Work with design/drawings to cut and install advanced custom design carpets with unique patterns.Additional Functions: Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. . Conduct safety audits and assists team members in doing safety audits. . Assist in maintaining shop equipment and associated JSAs. . Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). . Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required. levels of safety, quality and productivity. . Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. .Perform other duties as assigned.Other Requirements: Possess a working knowledge of Gulfstream inspection and process specifications and terminology. The ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221934Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Inspector Sr A&Pin GAC SavannahUnique Skills:Second Shift Monday through Thursday.Gulfstream Large Cabin Experience Preferred; Flight Safety Initial Preferred but not Required; Must be Able to Lift 50 Lbs, Must be Able to Work from Ladders, Stands, and Heights; Must be able to Occasionally Work in Confined Spaces; Must be Proficient with Computers.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221455Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Certification Inspector A&Pin GAC SavannahUnique Skills:Airframe and Powerplant license required.Education and Experience RequirementsHigh School Diploma or GED required. 7 years aircraft inspection experience to include 3 years inspection experience on large or mid-size aircraft (or same type and complexity as GAC aircraft). A&P (FAA Airframe and Powerplant) license required. ASQ certificate (American Society for Quality) preferred. Other Inspection Authorization (IA) preferred. Other DAR/DMIR/ODAR/ODA-Unit Member in good-standing preferred. Position Purpose:Performs airworthiness and certification inspections in a timely manner to ensure aircraft and/or component airworthiness. Physically inspects aircraft, components, and reviews related documentation to ensure workmanship meets acceptable standards of quality and customer aircraft/components are returned to service in an airworthy condition with all required. documentation properly completed and filed. As an ODA Inspection Authorized Representative (IAR) or FAA Designee, works as a part of Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/ODA requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Performs inspection and airworthiness inspection duties utilizing accepted/approved data including QC/QA procedures, instructions, and other related documents. Conducts first article inspections to ensure compliance with FAA and/or ODA approved procedures and ensures all associated records are completed . Performs inspections and certifies acft/component as airworthy prior to delivery and Return to Service . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Ensures aircraft/components are airworthy prior to any flight activities . Issuance of FAA 8130-3 Forms in accordance with FAA/ODA requirements for authorized functions and activities to include conformity, prototype, export, and 14 CFR Part 43 Return to Service activities . Performs certification inspections to type design requirements in support of acft/component certification . Monitors repair station compliance to the requirements of 14 CFR Part 145 and the FAA accepted site Repair Station and QC Manuals . Develops and approves acft log book entries relating to acft configuration and installations . Performs FAA acft/component certification activities as an IAR . Manages Product/Article certification activities . Provides technical support to inspection personnel supporting FAA and/or ODA documented requirements . Supports coordination of inspection workloads .Perform other duties as assigned.Other Requirements: Competent in use of all job related tools and equipment. Proficient in blueprint/drawing reading, use/interpretation of Maintenance Manuals, CMP, ADTS, Travelers, Customer Bulletins, Airworthiness Directives, test specifications and other manufacturing/inspection related documentation. Must possess working knowledge and application of Quality Assurance or Quality Control systems and methodologies. Must possess a verifiable working knowledge of FAA Regulations, Orders, and other guidance pertinent to issuance of export airworthiness approvals & conformity determination as defined in FAA Order 8100.8D Appendix A (as revised) and 8100.15 (as revised). Able to complete FAA/ODA initial/recurrent designee training within established timeframe to include obtaining a passing certificate as part of IAR application process. Must be capable of obtaining IAR designee appointment within established timeframe depending on Airworthiness and Conformity function code(s) required. for position. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221042Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Mechanic Team Lead-A&P (4th Shift-Weekend Days)in GAC SavannahUnique Skills:Availabilty to work 4th Shift (Weekend Days)Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221232Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Flight Test Avionics/Electrical Technician IIin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 221978Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS Airworthiness Inspector A&Pin GAC SavannahUnique Skills:We are looking for talented, motivated individuals who are ready to do innovative work. Must have a current FAA Airframe and Powerplant certificate.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221749Category: Quality AssurancePercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 09/13/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Interior Install Technician Srin GAC SavannahUnique Skills:G500/G600 experience or G650 experienceCatia experienceEducation and Experience RequirementsHigh School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional InformationRequisition Number: 220920Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Seniorin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221090Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician A&Pin GAC SavannahUnique Skills:Must be able to work 3rd shift.G-550 experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220663Category: Service CenterPercentage of Travel: Up to 25%Shift: ThirdEmployment Type: Full-timePosting End Date: 11/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technicianin GAC SavannahUnique Skills:Let your career take flightEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 219457Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 05/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

NDT Technician Iin GAC SavannahUnique Skills:Must work well in a team setting. Must be willing to learn and be flexible.Education and Experience RequirementsHigh School Diploma or GED required. 1 year of NDT related experience required.. Must be able to obtain certification in one NAS 410 NDT method within 1 year. Other Certification in and NAS 410 NDT methods preferred. ASQ certificate (American Society for Quality) preferred. Position Purpose:In a team-oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies and installations are built to type design data.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform non-destructive tests (NDT) and determine product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures . Record, organize and evaluate test results and enter results into applicable documents . Ensure compliance to all radiation safety rules and regulations and provide protection to self and others during testing . Maintain equipment and assure calibration for tests to be performed . Maintain inventory control of area equipment .Additional Functions: Works with and assists other NDT Technicians as required. . Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness . Provides technical assistance to subordinate level NDT technicians . Performs process control on area inspection equipment . Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms . Performs automated ultrasonic C-scan inspection of composite parts . Must be available to work any shift .Perform other duties as assigned.Other Requirements: Must provide formal NDT training records. NDT experience on determining product acceptability preferred. Experience in blueprint reading and interpretation. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal and communication skills. Must demonstrate good housekeeping and safety practices. Proficiency in current computer-based software. Must be able to lift and transport objects up to 40 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223268Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics/Electrical Technician Srin GAC SavannahUnique Skills:Able to work first or second shift. Willing to work overtimeEducation and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 223451Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 11/12/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Electrical Technician II - Special Missionsin GAC SavannahUnique Skills:Strong avionics install skills requiredShifts will be 2nd, 3rd and weekendEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223024Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic IVin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred.. Q-stamp preferred. Position Purpose:In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Check all work and ensure a defect free assembly prior to final inspection . Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . Support Lean Activities, comply with all safety, 5S, and housekeeping policies .Perform other duties as assigned.Other Requirements: Good working knowledge of computers and related software. Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. Must be able to work any shift. Must be able to lift 50 lbs. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223327Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JP1

Avionics Technician (Completions)inGAC SavannahUnique Skills:Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 223275Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 11/11/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT