Overview: The Maintenance Technician is to assist the Maintenance Supervisor in maintaining the physical integrity of the property. This involves ensuring a safe, secure and comfortable living environment for residents, visitors, and staff. The Maintenance Technician will carry out assigned duties in a safe manner and other duties as requested by the Maintenance Supervisor. In the absence of the Maintenance Supervisor, the Maintenance Technician will assume all maintenance responsibilities. Responsibilities: The Maintenance Technician will conduct all business in accordance with company policies and procedures and all state and federal regulations (such as Lead Based Paint, ADA, Fair Housing, HAZCOM Program, OSHA, etc.).Must be knowledgeable of all pertinent laws and EPA and OSHA regulations.Must be aware of the condition of the property at all times and take immediate steps to correct any unsafe condition.Schedule and perform routine preventive maintenance on all appropriate equipment as directed by the Maintenance Supervisor and the Property Manager. Inspect and maintain all tools in excellent condition.Must be aware of all utility meter cut-offs, apartment and fixture cut-offs, and sewer clean-outs.Perform work area clean-up and safety related duties.Ensure that storage areas remain locked when not in use.Diagnose and perform minor or routine maintenance or repair, as directed, involving the following on a daily basis:Electrical and plumbingA/C and heating systemsAppliancesWater irrigation systemsStairs, gates, fences, patios, railingsTile, carpet, and flooringRoofing, gutters, fastenersInterior/exterior lightsFireplaces, ceiling fansGas fixtures and appliancesShutters, doors, cabinets, windows, sliding glass doorsBoiler, gas and electricDoor locks, P.O. boxes and locksSecurity systemsCeiling leaksWallsPool areas, tile, hot tub/spa, pool furnitureInspect and help coordinate all needed make-ready repairs and services. Assist make-ready staff as required to meet deadlines.Report all major repairs and need requisitions to Maintenance Supervisor prior to any expenditure of funds.Change locks, rekey locks and make keys.Remove and transfer heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant. Assist in moving abandoned furniture, appliances, etc. to dumpster when necessary.Any other requests made by the Maintenance Supervisor, Property Manager, Service Director, Regional Manager, or other company official as needed. Qualifications: Knowledge/Experience Required of the PositionHigh level of proficiency in written, verbal, and arithmetic skillsAbility to plan and juggle multi task environment and lead Service teamMust possess solid knowledge of carpentry, electrical, plumbing, etc. information as required by daily operation.Education and ExperienceHigh School Diploma required, Technical College preferredMinimum of 2 years’ experience in property managementHigh School Diploma required, Technical College preferredCertifications in EPA, CPO - preferredAbility to earn future designations as required by Industry standards, EPA regulations, OSHA requirements, etc. Company Overview: The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR’s vertical integration is strengthened by over 1,100 real estate professionals in more than 30 offices nationwide who manage over $41 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a “Top Place to Work”, by the Environmental Protection Agency (EPA) as an “ENERGY STAR Partner of the Year” and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.RMR’s mission is to create long term value for our clients by managing their investments and assets “like we own it” – an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided bysix core values:Integrity at Our Core.Perform Passionately and Effectively.Inspired Thinking.Like We Own It.Power of We.Mutual Respect.Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.Follow RMR on LinkedIn, on Instagram @thermrgroup and on Twitter @The_RMR_Group.The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, pleaseclick here. If you’d like more information on your EEO rights under the law, pleaseclick here.

Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: Competitive Starting Pay Paid Training Global Advancement Opportunities Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of 5 years’ chiller experience, with knowledge of maintenance procedures, trouble shooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment. You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face. You will be expected to provide quote estimates for labor & material repairs and upgrades as needed. You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location. You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment. You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions. You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotation, since we are a 24/7 service company.What we look for Required:Requires Mechanical Refrigeration Journeyman statusKnowledge of ammonia refrigeration systems is required.The Individual will be responsible for: the operation, maintenance and repair of ammonia refrigeration chiller systemsTraining on going certification on ammonia will be providedMore than 5 years of industrial experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad)Adherence to company safety program.

Job Description Job Title:Automotive Technician / MechanicLocation: 3945 Doc Sams Rd., Cumming, GA 30028Job Overview:This brand-new state-of-the-art facility is scheduled to open in November 2024. Interviews will begin in October 2024.We are looking for technicians/mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our customers.Responsibilities include, but are not limited to:Technicians use their knowledge & skills to diagnose and fix vehicles for our customersContinuously build experience as an automotive mechanic across a wide range of domestic and foreign vehiclesComplete full, accurate, and honest courtesy vehicle inspectionsWork as part of a team to troubleshoot customer concerns quickly and effectivelyFollow and promote our high standards of safety, cleanliness, and organizationWork closely with the service department and effectively communicate customer concernsWork together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications:Positive attitude and a desire to serve guest3+ years of experience as an automotive technician/mechanicASE Certifications preferred, or a plan to achieveCapable of diagnosing and repairing all makes/models of vehiclesMeet or exceed hourly goalsAptitude for learning additional skills and processesProfessional appearance and strong communicationA desire for long-term career developmentPhysical Requirements:Occasionally lift and/or move over 100 poundsBe able to work with tools on vehicles lifted above their headWork in tight spaces as dictated by the vehicle’s needed repairHave the needed dexterity in order to efficiently use hand toolsWalk/stand for the majority of their workdayDrive manual transmissions vehiclesEfficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support, and access to our private Technician Assistance Center.All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Serving the needs of all families with young children,Carter’s Inc. is the largest North American apparel retailer exclusively for babies and young children, encompassing Carter’s, OshKosh B’gosh, Skip*Hop and Little Planet brands. Meaningful work, constant learning, genuine people, and a community guided by core values that promote inclusion and innovation is in everything we do. There are many reasons to build your career at Carter's.Essential Job functions (Tasks, duties and responsibilities most important for the job)Uses correct procedures to order, receive, and track parts and supplies. Consistently processes and submits reports or paperwork. Creates and maintains organized files and databases and identifies and resolves discrepancies in records or files. Tells management about incorrect or inefficient processes, inventory variances, and Computerized Maintenance Management System (CMMS) deficiencies. Records and reconciles financial transactions in a timely manner, and maintains the security of financial filesProvides support to maintenance operations by generating and maintaining forms, reports, and logs via computerized maintenance management software (CMMS); performing weekly inventory checks; tracking financial transactions; and overseeing and communicating equipment warranties to suppliersMust control and issue tools and parts to maintenance as required.Generate reports and assist in purchasing of parts and equipment as required.Track and maintain trend performance reporting tools.Uses policies, procedures, and/or guides to make good choices. Uses data and facts in order to make day-to-day decisions and involves others as needed. Recognizes what might be a problem and informs those who can correct it.Plan for and Improve Work - Accepts responsibility and meets expectations for own work. Identifies steps needed in order to carry out work as requiredUses policies and information in order to exceed company expectations. Finds and uses the right resources (products and tools) at the right time in order to resolve work requests.Must have the ability to perform the job with the highest standards of quality and accuracy.SECONDARY FUNCTIONS (IF APPLICABLE - ANY DUTIES NOT CONSIDERED ESSENTIAL)Occasional assistance to industrial engineering and maintenance technicians as required.Other tasks as assigned.Required Experience:knowledge, skill and ability requirements-minimum compentencies required for jobBasic working knowledge of computers, RF Scanners and Warehouse Management systems.Basic working knowledge of conveyor, equipment and electrical parts.Proven team member with skills to multi-task.Proficient reading skills.Experience with Microsoft Suite, specifically proficient with Excel and Word.The ability to use basic computer functions as needed.Must have the ability to abide by all of Carter’s policies and procedures; specifically, the attendance policy.Must have the ability to work safely and abide by all of Carter’s Safety rules and procedures.Must know, understand and follow all Standard Operating Procedures.The ability to be certified on lift equipment should this be required.Wear personal protective equipment (PPE) as required, to include, but not be limited to fall protection, eye protection, hearing protection, respiratory protection, chemical protection, and electrical protection.Prior work experience and educational requirementsHigh school diploma or a GED preferred, not required.Six months automated distribution center experience preferred.PHYSICAL and Work DEMANDSMust be available to work in a multi-channel, multi-shift distribution environment, flexible to work different shifts and extended hours based upon business needs.Must be able to stand and work for long periods including daily overtime, holidays and overtime as required.Requires intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting material or equipment, some of which may be heavy or awkward.Use approved equipment to access freight and equipment in elevated areas.May work with substances that require special handling.Must be able to repetitively lift cases weighing up to forty pounds.Must be able to work in varying to extreme temperatures.Holiday schedule to be decided by Management.Must be available to work consecutive days in a row (for example 14+ days).Comply with Blackout Periods (no vacation or personal time allowed) as determined by Management.Carters is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, veteran status, or any other status protected by federal, state, or local law.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.Do you have expertise in repairing Injection Molding equipment Jabil has an exciting opportunity for experienced Maintenance Technicians in Atlanta, GA!How will you make an impact In this role, you will be performing complex maintenance and repairs on electrical, mechanical, pneumatic, and/or hydraulic plant equipment including injection molding machinery. Day and Swing Shifts availablePay: $30 DOESign-On Bonus Up to $1,500 DOECompetitive Benefits including Profit Sharing!What will you do Performs routine preventive maintenance and emergency mechanical, hydraulic, pneumatic, and electrical maintenance on production systems and equipment, using knowledge of electrical-mechanical devices, circuitry, electronics, motors, wiring diagrams, schematics, and blueprints.Troubleshoots, repairs, aligns, calibrates, inspects, and tests a variety of production systems and equipment.Performing hydraulic, pneumatic, high voltage electrical, and mechanical repairs on Injection molding equipment.Set up assembly line equipment within established parameters.Assists in installing new equipment and in moving equipment to new locations.Disassembles machines and parts and adjusts repairs or replaces defective parts and materials.Uses a variety of basic hand and power tools and equipment including hand drill, bench grinder, and band saw.Instruct the Production Team on the proper use of equipment.Maintains appropriate maintenance and repair logs.Cleans and lubricates parts and equipment as scheduled.Learns all aspects of machine maintenance and becomes cross-trained in all areas of molding/assembly equipment.Requisitions parts needed for completion of preventive maintenance responsibilities.Support all company safety and quality programs and initiatives.Other responsibilities may be assigned from time to time as needed, based on the evolution of the company and therequirements of the department/position.How will you get here Education:High School Diploma/GED.Experience:5 years of experience in industrial maintenance.Maintenance experience repairing plastic injection molding equipment is required.Requires solid experience in mechanical, electrical, and pneumatic principles and systems.Knowledge, Skills, Abilities:Solid knowledge of mechanical equipment and electrical and hydraulic drawings. Mechanical and electrical troubleshooting, diagnosis, and repair.Ability to read and write English and interpret documents such as technical manuals, blueprints,safety rules, operating instructions, and procedure manuals.Knowledge and ability to use relevant hand tools in the repair of equipment.What does Jabil offer Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options401K matchEmployee Stock Purchase PlanPaid Time OffTuition ReimbursementLife, AD&D, and Disability InsuranceCommuter BenefitsEmployee Assistance ProgramPet InsuranceAdoption AssistanceAnnual Merit IncreasesCommunity Volunteer OpportunitiesApply Today!BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.

Maintenance Mechanic Career Opportunity Acknowledged for your proficiency as a Maintenance MechanicAre you a skilled Maintenance Mechanic seeking a career that combines your technical expertise with a sense of purpose Look no further! Encompass Health is looking for skilled Maintenance Mechanics seeking purposeful careers. Join us as a crucial member ensuring facility reliability and functionality, contributing to a workplace close to home and heart. Be the driving force behind maintenance, ensuring a secure environment for patients, visitors, and staff. Your role spans executing preventative maintenance, repairs, and tasks across hospital systems, including equipment, utilities, plumbing, electrical, HVAC, as well as light construction, painting, groundskeeping, security, and floor care. Ready to make a meaningful impact while leveraging your craft Explore this opportunity with us and help keep our operations running smoothly. A Glimpse into Our WorldAt Encompass Health, you'll experience the difference the moment you become a part of our team. Working with us means aligning with a rapidly growing national inpatient rehabilitation leader. We take pride in the growth opportunities we offer and how our team unites for the greater good of our patients. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing. Starting Perks and BenefitsAt Encompass Health, we are committed to creating a supportive, inclusive, and caring environment where you can thrive. From day one, you will have access to:Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.Generous paid time off that accrues over time.Opportunities for tuition reimbursement and continuous education.Company-matching 401(k) and employee stock purchase plans.Flexible spending and health savings accounts.A vibrant community of individuals passionate about the work they do! Become the Maintenance Mechanic you always wanted to beSafely and effectively test and operate emergency power supply system (EPSS) and its components.nstall/maintain/repair mechanical, electrical, HVAC, pneumatic, oxygen, and telephone systems.Work independently in the specified time frame as assigned per job task under the direction of the supervisor.Retain auto, carpentry, phone, pneumatics, stationary engineer, hydraulics, and computer skills.Plan, interpret, examine, draw, and record work; report daily completion to supervisor.Perform all types of control maintenance, building construction and repair, and equipment overhaul within required time frame.Maintain a working knowledge of all facility systems and all applicable regulatory standards. QualificationsLicensing in a specialty field such as electrical, plumbing, or HVAC is preferred.Valid driver's license may be required.High school diploma or equivalent work experience preferred.Previous experience in preventative maintenance, equipment repair, HVAC, plumbing, electrical, and/or construction required. Healthcare experience is a plus.May be required to work weekdays and/or weekends, evenings and/or night shifts if needed.Ability to lift, lower, push, pull, and retrieve objects weighing a minimum of 50 pounds.Must demonstrate the ability to tolerate frequent position changes such as twisting, stooping, reaching, squatting, kneeling, pushing/pulling, and bending positions for complete shift.Ability to work on ladders and scaffolds and be able to sit, stand, and walk for momentary to extended periods of time.Ability to safely work with hazardous materials. The Encompass Health WayWe proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing!At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.We're eagerly looking forward to meeting you, and we genuinely mean that. Join us on this remarkable journey!

5700 Peachtree Industrial Blvd. Chamblee, GA 30341 Main Shop Auto Technician $80,000+ Income!PREMIUM Benefits!Family-Owned! A/C Shop! New Equipment!Award-winningEd Voyles Acura is family-owned and a GREAT place to have a Rewarding Career! Our High-Volume Service Dept. is seeking to hire Main Shop Technicians to repair vehicles. Auto repair experience is preferred. Enjoy working with NEW EQUIPMENT in our Air-Conditioned Shop! We appreciate our employees and INVEST in their success! Apply now for this great opportunity to drive your career forward with our growing organization!We Provide Premium Benefits:$80,000+ Performance Driven IncomeASE Tuition ReimbursementAir-Conditioned Shop with New EquipmentMedical / Dental / Vision InsuranceFlexible Spending and Health Savings AccountsSupplemental Life, Short-term & Long-term Disability InsuranceAccident and Critical Illness InsurancePaid Time OffUp to 3 weeks’ vacation time(1 for the first year)No Sundays, 5 paid holidays401(k) with employer matchEmployee discounts on vehicle purchase, parts, and serviceComprehensive training programs at all levels and in all departmentsReferral programCareer growth and advancement opportunitiesResponsibilities include but are not limited to:Perform vehicle inspections, diagnostics, repairs, maintenance, recall work, and installations according to experience and certificationsAutomotive services: engine, transmission, electrical, drivability, suspensions, alignments, steering, heating and air conditioning, basic and ABS brakes, exhaust systems, etc.Keep shop area neat/clean and account for toolsQualifications - Main Shop Auto Technician:Main Shop Auto Technician, Mechanic experience is preferredMust have own toolsWorks well in a high-volume, team settingMust be versatile in skills and tasks performedWorking knowledge of shop equipmentAnalytical with top problem-solving skillsA positive attitude and good work ethicValid driver's license and good driving record.

101 Harbor Creek Pkwy., Holly Springs, GA 30115 Automotive Express Service TechnicianCompetitive Pay Plan + Great Benefits!Experience Preferred but we will Train!Walk-in Applicants are Welcome!Cherokee County Nissan is a full-service dealership serving drivers in Canton and Marietta. You will enjoy working in our new, modern dealership with a large showroom and new and used car lots, as well as a state-of-the-art Service Department.We are looking for motivatedExpress Service Technicians. This is a great career opportunity.Start your path towards a career as an automotive technician! We value our employees and invest in their success. Apply online today or stop by!We welcome Technicians from other brands and Industries such as:Firestone, Valvoline, Pep Boys, Jiffy Lube, Midas, etc.We Offer:Competitive pay planMedical, Dental and Vision insurance401(k) planPaid vacationEmployee discounts on vehicles, service, and more!A positive, professional team environmentOpportunities for career advancement!Responsibilities - Express Service Technician:Perform express/quality service on vehicles which will include oil changes, tire rotations, replacing wipers, filters, etc.Conduct multi-point inspections of customer vehicles to identify needed maintenance services and repairs.Check and top up fluid levels, tire pressures, tire treads, brake measurements, suspension components, and all other listings required by the multi-point inspection.Reset maintenance reminders and include new maintenance stickers on all vehicles.Responsible for keeping shop area neat, clean, and able to account for all dealership-owned tools at all times.Willingness to perform tasks as instructed by the team lead, shop foreman, and service manager.Show effective communication and attitude required to work in a team environment.Qualifications/Requirements - Express Service Technician:Previous Experience as an Express Service Technician a plus!Automotive Service Excellence (ASE) certification a plus but NOT required!High School Diploma or equivalentA valid driver's license and good driving recordTeam oriented, flexible and focused on maintaining a high level of customer servicePlease upload your resume,Completing the online assessment will grant you priority consideration!Must be authorized to work in the U.S. without sponsorship and be a current resident.Must pass pre-employment testing to include background checks, MVR, and drug screening.We are an Equal Opportunity Employer. All qualified applicants considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation or other protected status.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

WHY CRACKER BARRELWhat is it like to work at Cracker Barrel It feels like Care beyond the table – At Cracker Barrel, we serve up care for you, so you can serve up care for our guests. It’s an extension of our hospitality and the foundation of everything we do. Opportunities to fill your cup – As a member of our team, you’ll have hands-on opportunities to learn and grow in different roles.A warm welcome – For more than 50 years, we have committed to “serving up” a sense of warmth and hospitality to thousands of employees across the country. Serving up the care – and career – you crave.WHAT YOU’LL DOAs a Night Maintenance, you will protect the guest experience by ensuring the building and equipment are ready for the next day. This is a third-shift role, so you will use the time the store is closed to focus on the appearance of the building and the cleanliness of the food-preparation areas. Practice Hospitality in Action: Make sure guest health is protected by using the highest standards of cleanliness in all areas of the store.Follow the company’s policies and procedures, including those for safety and security.WHAT YOU’LL NEEDA pleasant, outgoing personality and a team attitudeA desire to provide the kind of service you enjoyThe ability to handle multiple tasks at onceNo experience is necessary; we will teach you what you need to know!WHAT’S IN IT FOR YOU Compensation and More: Competitive pay every week | Same-day pay availabilityCare for Your Well-being: Health insurance eligibility on day 1 – Full and Part-time employees | Vacation time | Employee assistance program (EAP) | Culture of belongingInvest in Your Future: Growth and development opportunities begin Day 1 with our industry-leading PAR training program | 401k plan with company matching contributions at 90 days | Employee Stock Purchase ProgramEven More to Look Forward to: 35% Discount on Cracker Barrel Food and Retail items | Exclusive Biscuit Perks like discounts on home, travel, cell phones, and more!ABOUT USFor more than 50 years, we have committed to serving up a sense of warmth and hospitality across hundreds of stores across the country. We believe in providing opportunities for growth and development for our 70,000 plus team members and take pride and comfort in that enduring Cracker Barrel hospitality. It’s something our employees and guests can count on now and into the future as we welcome new employees, guests, and experiences. Just like uncovering a delightful find in our stores, there is potential for discovery and fulfillment in every job at Cracker Barrel.PURSUE THE CAREER YOU CRAVEAPPLY NOWCracker Barrel is an equal opportunity employer.Qualified applicants are considered for all positions without regard to race, color, religion, sex, sexual orientation, genetic information, national origin, age, marital status, medical condition, disability or any other class expressly protected by law.

JOB SUMMARYPerforms work in one or more of the maintenance trades requiring advanced specialized knowledge (e.g., electrical, HVAC, etc.) Tests, inspects troubleshoots and repairs machines, equipment and/or systems. Conducts a variety of complex installation and maintenance work to prevent breakdowns and ensure proper functioning of facility, machinery, equipment and applicable systems. REQUIREMENTSMaintains safe, efficient and proper operation of a variety of Distribution Center equipment and systems. Competes tests, inspections, troubleshooting and repairs. Interprets blueprints, sketches, layouts, wiring diagrams, drawings and specifications. Leads and guides other associates in safety procedures, installations and maintenance. Recommends and implements improvements to equipment, operations and procedures as appropriate. Oversees and maintains repair, inventory and maintenance logs. Estimates costs, prepares requisitions and contacts vendors for parts and service as necessary. Performs special projects or duties as assigned. Guidance and Contacts specify the number of associates receiving day-to-day guidance/direction. Qualifications:Trade school with completion of a formal apprenticeship program. Four years of experience in the installation, maintenance, and repair of a variety of equipment including mechanical electronic, pneumatic, and hydraulic control systems. Demonstrated leadership or supervisory experience. Willingness to work various shifts to meet business needs is required. Minimum job skills required to perform this job (for example: programming languages, strong interpersonal skills, computer software packages): Minimum experience required to perform this job: List specific jobs which could prepare an individual for this job: Maintenance Specialist Mechanic Organization Chart D/C Maintenance TechnicianAt HomeGoods, we embrace the unknown? - with new products, new challenges and new ways to make a house a home. Our products add little, special touches to customers' lives and our people do the same for each other. Everyone supports each other to Discover Different - here and throughout the entire TJX family, which includes TJ Maxx, Marshalls, Sierra, and Homesense.Discover Different means we embrace each other’s differences and unique perspectives. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Overview: The Maintenance Technician is to assist the Maintenance Supervisor in maintaining the physical integrity of the property. This involves ensuring a safe, secure and comfortable living environment for residents, visitors, and staff. The Maintenance Technician will carry out assigned duties in a safe manner and other duties as requested by the Maintenance Supervisor. In the absence of the Maintenance Supervisor, the Maintenance Technician will assume all maintenance responsibilities. Responsibilities: The Maintenance Technician will conduct all business in accordance with company policies and procedures and all state and federal regulations (such as Lead Based Paint, ADA, Fair Housing, HAZCOM Program, OSHA, etc.).Must be knowledgeable of all pertinent laws and EPA and OSHA regulations.Must be aware of the condition of the property at all times and take immediate steps to correct any unsafe condition.Schedule and perform routine preventive maintenance on all appropriate equipment as directed by the Maintenance Supervisor and the Property Manager. Inspect and maintain all tools in excellent condition.Must be aware of all utility meter cut-offs, apartment and fixture cut-offs, and sewer clean-outs.Perform work area clean-up and safety related duties.Ensure that storage areas remain locked when not in use.Diagnose and perform minor or routine maintenance or repair, as directed, involving the following on a daily basis:Electrical and plumbingA/C and heating systemsAppliancesWater irrigation systemsStairs, gates, fences, patios, railingsTile, carpet, and flooringRoofing, gutters, fastenersInterior/exterior lightsFireplaces, ceiling fansGas fixtures and appliancesShutters, doors, cabinets, windows, sliding glass doorsBoiler, gas and electricDoor locks, P.O. boxes and locksSecurity systemsCeiling leaksWallsPool areas, tile, hot tub/spa, pool furnitureInspect and help coordinate all needed make-ready repairs and services. Assist make-ready staff as required to meet deadlines.Report all major repairs and need requisitions to Maintenance Supervisor prior to any expenditure of funds.Change locks, rekey locks and make keys.Remove and transfer heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant. Assist in moving abandoned furniture, appliances, etc. to dumpster when necessary.Any other requests made by the Maintenance Supervisor, Property Manager, Service Director, Regional Manager, or other company official as needed. Qualifications: Knowledge/Experience Required of the PositionHigh level of proficiency in written, verbal, and arithmetic skillsAbility to plan and juggle multi task environment and lead Service teamMust possess solid knowledge of carpentry, electrical, plumbing, etc. information as required by daily operation.Education and ExperienceHigh School Diploma required, Technical College preferredMinimum of 2 years’ experience in property managementHigh School Diploma required, Technical College preferredCertifications in EPA, CPO - preferredAbility to earn future designations as required by Industry standards, EPA regulations, OSHA requirements, etc. Company Overview: The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR’s vertical integration is strengthened by over 1,100 real estate professionals in more than 30 offices nationwide who manage over $41 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a “Top Place to Work”, by the Environmental Protection Agency (EPA) as an “ENERGY STAR Partner of the Year” and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.RMR’s mission is to create long term value for our clients by managing their investments and assets “like we own it” – an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided bysix core values:Integrity at Our Core.Perform Passionately and Effectively.Inspired Thinking.Like We Own It.Power of We.Mutual Respect.Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.Follow RMR on LinkedIn, on Instagram @thermrgroup and on Twitter @The_RMR_Group.The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, pleaseclick here. If you’d like more information on your EEO rights under the law, pleaseclick here.

What you will doJohnson Controls Inc. is looking for forward-thinking entry level talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for entry level skilled HVAC Technicians who have experience with air cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for entry level startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 1 year of practical working experience on air cooled or large roof top ducted units with some HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: The Maintenance Technician is to assist the Maintenance Supervisor in maintaining the physical integrity of the property. This involves ensuring a safe, secure and comfortable living environment for residents, visitors, and staff. The Maintenance Technician will carry out assigned duties in a safe manner and other duties as requested by the Maintenance Supervisor. In the absence of the Maintenance Supervisor, the Maintenance Technician will assume all maintenance responsibilities. Responsibilities: The Maintenance Technician will conduct all business in accordance with company policies and procedures and all state and federal regulations (such as Lead Based Paint, ADA, Fair Housing, HAZCOM Program, OSHA, etc.).Must be knowledgeable of all pertinent laws and EPA and OSHA regulations.Must be aware of the condition of the property at all times and take immediate steps to correct any unsafe condition.Schedule and perform routine preventive maintenance on all appropriate equipment as directed by the Maintenance Supervisor and the Property Manager. Inspect and maintain all tools in excellent condition.Must be aware of all utility meter cut-offs, apartment and fixture cut-offs, and sewer clean-outs.Perform work area clean-up and safety related duties.Ensure that storage areas remain locked when not in use.Diagnose and perform minor or routine maintenance or repair, as directed, involving the following on a daily basis:Electrical and plumbingA/C and heating systemsAppliancesWater irrigation systemsStairs, gates, fences, patios, railingsTile, carpet, and flooringRoofing, gutters, fastenersInterior/exterior lightsFireplaces, ceiling fansGas fixtures and appliancesShutters, doors, cabinets, windows, sliding glass doorsBoiler, gas and electricDoor locks, P.O. boxes and locksSecurity systemsCeiling leaksWallsPool areas, tile, hot tub/spa, pool furnitureInspect and help coordinate all needed make-ready repairs and services. Assist make-ready staff as required to meet deadlines.Report all major repairs and need requisitions to Maintenance Supervisor prior to any expenditure of funds.Change locks, rekey locks and make keys.Remove and transfer heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant. Assist in moving abandoned furniture, appliances, etc. to dumpster when necessary.Any other requests made by the Maintenance Supervisor, Property Manager, Service Director, Regional Manager, or other company official as needed. Qualifications: Knowledge/Experience Required of the PositionHigh level of proficiency in written, verbal, and arithmetic skillsAbility to plan and juggle multi task environment and lead Service teamMust possess solid knowledge of carpentry, electrical, plumbing, etc. information as required by daily operation.Education and ExperienceHigh School Diploma required, Technical College preferredMinimum of 2 years’ experience in property managementHigh School Diploma required, Technical College preferredCertifications in EPA, CPO - preferredAbility to earn future designations as required by Industry standards, EPA regulations, OSHA requirements, etc. Company Overview: The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR’s vertical integration is strengthened by over 1,100 real estate professionals in more than 30 offices nationwide who manage over $41 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a “Top Place to Work”, by the Environmental Protection Agency (EPA) as an “ENERGY STAR Partner of the Year” and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.RMR’s mission is to create long term value for our clients by managing their investments and assets “like we own it” – an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided bysix core values:Integrity at Our Core.Perform Passionately and Effectively.Inspired Thinking.Like We Own It.Power of We.Mutual Respect.Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.Follow RMR on LinkedIn, on Instagram @thermrgroup and on Twitter @The_RMR_Group.The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, pleaseclick here. If you’d like more information on your EEO rights under the law, pleaseclick here.

What you will doDo you have HVAC experience We are looking for skilled Journeymen who have worked in residential, light commercial and/or heavy commercial markets to join our team to work with the most advanced heavy commercial and industrialcutting edgeequipment.How you will do itWe provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry. You may be required to pass a satisfactory examination as to your special skill.What we look forRequiredRequires Mechanical Journeyman status3-5years of residential / light commercial /commercial HVAC / mechanical troubleshooting experience.Valid driver's license, appropriate licenses to work with refrigerants, boiler and steam operational & service knowledge.This is a Bargaining Unit Position.Good verbal and written communication skills

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: The Maintenance Technician is to assist the Maintenance Supervisor in maintaining the physical integrity of the property. This involves ensuring a safe, secure and comfortable living environment for residents, visitors, and staff. The Maintenance Technician will carry out assigned duties in a safe manner and other duties as requested by the Maintenance Supervisor. In the absence of the Maintenance Supervisor, the Maintenance Technician will assume all maintenance responsibilities. Responsibilities: The Maintenance Technician will conduct all business in accordance with company policies and procedures and all state and federal regulations (such as Lead Based Paint, ADA, Fair Housing, HAZCOM Program, OSHA, etc.).Must be knowledgeable of all pertinent laws and EPA and OSHA regulations.Must be aware of the condition of the property at all times and take immediate steps to correct any unsafe condition.Schedule and perform routine preventive maintenance on all appropriate equipment as directed by the Maintenance Supervisor and the Property Manager. Inspect and maintain all tools in excellent condition.Must be aware of all utility meter cut-offs, apartment and fixture cut-offs, and sewer clean-outs.Perform work area clean-up and safety related duties.Ensure that storage areas remain locked when not in use.Diagnose and perform minor or routine maintenance or repair, as directed, involving the following on a daily basis:Electrical and plumbingA/C and heating systemsAppliancesWater irrigation systemsStairs, gates, fences, patios, railingsTile, carpet, and flooringRoofing, gutters, fastenersInterior/exterior lightsFireplaces, ceiling fansGas fixtures and appliancesShutters, doors, cabinets, windows, sliding glass doorsBoiler, gas and electricDoor locks, P.O. boxes and locksSecurity systemsCeiling leaksWallsPool areas, tile, hot tub/spa, pool furnitureInspect and help coordinate all needed make-ready repairs and services. Assist make-ready staff as required to meet deadlines.Report all major repairs and need requisitions to Maintenance Supervisor prior to any expenditure of funds.Change locks, rekey locks and make keys.Remove and transfer heavy appliances and equipment from storage area to apartment (or vice versa) as circumstances warrant. Assist in moving abandoned furniture, appliances, etc. to dumpster when necessary.Any other requests made by the Maintenance Supervisor, Property Manager, Service Director, Regional Manager, or other company official as needed. Qualifications: Knowledge/Experience Required of the PositionHigh level of proficiency in written, verbal, and arithmetic skillsAbility to plan and juggle multi task environment and lead Service teamMust possess solid knowledge of carpentry, electrical, plumbing, etc. information as required by daily operation.Education and ExperienceHigh School Diploma required, Technical College preferredMinimum of 2 years’ experience in property managementHigh School Diploma required, Technical College preferredCertifications in EPA, CPO - preferredAbility to earn future designations as required by Industry standards, EPA regulations, OSHA requirements, etc. Company Overview: The RMR Group (Nasdaq: RMR) is a leading U.S. alternative asset management company, unique for its focus on commercial real estate (CRE) and related businesses. RMR’s vertical integration is strengthened by over 1,100 real estate professionals in more than 30 offices nationwide who manage over $41 billion in assets under management and leverage more than 35 years of institutional experience in buying, selling, financing and operating CRE. RMR benefits from a scalable platform, a deep and experienced management team and a diversity of real estate strategies across its clients. RMR has been recognized by The Boston Globe as a “Top Place to Work”, by the Environmental Protection Agency (EPA) as an “ENERGY STAR Partner of the Year” and ranked by the Building Owners and Managers Association (BOMA) as having one of the highest number of BOMA 360 designated properties in its portfolio. RMR is headquartered in Newton, MA and was founded in 1986.RMR’s mission is to create long term value for our clients by managing their investments and assets “like we own it” – an approach that consistently and repeatedly generates opportunities for all our employees, investors and stakeholders. We are guided bysix core values:Integrity at Our Core.Perform Passionately and Effectively.Inspired Thinking.Like We Own It.Power of We.Mutual Respect.Visit our website to learn more about what makes The RMR Group a rewarding place to build a career.Follow RMR on LinkedIn, on Instagram @thermrgroup and on Twitter @The_RMR_Group.The RMR Group is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, pleaseclick here. If you’d like more information on your EEO rights under the law, pleaseclick here.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insuranc401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technician and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all controls technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in the development and testing of software programs necessary to operate the system per the intent of the project requirements. Compiles and/or completes project as-built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program graduate, an Associate’s degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.#TechHiring

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

What you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls componentsRespond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipmentProvide front line technical and repair support through effective communications with Johnson Controls customersProvide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customersBe part of an expanding team of the best technicians in the industry while you build career with a first-class global organizationHow you will do itLoading Johnson Controls field and network level controller softwarePerforming commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e., Sensors, actuators, etc.) and complete all required commissioning documentationKeeps management and JCI contractor or customer informed of job progress and issuesCalibrates systems requiring basic electronic test equipmentCompletes administrative tasks including but not limited to time sheets, expense reports, and on-site documentationDocuments changes and provides information for as-built documentationExecute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needsCommunicates with the JCI contractor or customer upon arrival and before leaving the work siteFollows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safetyWhat we look forRequiredStrong understanding of HVAC systems, sequence and applicationsDemonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Attention to detail.Good communication and listening skills.(Depending on location, the mounting and termination of low voltage devices may have special licensing requirements.)#TechHiring

What we offer:Competitive Starting PayHealth Savings Account (HSA)Tuition ReimbursementPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceLife Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramWhat you will do ·Install, program, configure, commission and service Fire Alarm and Fire Suppression Systems including but not limited to; Simplex, Fike, Kidde, Inergen, Sapphire, FM-200, and CO2 as well as other related building system products at customer sites. How you will do it ·Execute projects on time and within allocated installation hours. ·Work with the project manager to resolve all discrepancies, and coordination problems that impair installation activities. ·Must be able to work on multiple projects simultaneously. ·Read and interpret complicated blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals. Coordinate the installation activities with all trades to optimize installation time. Attend all required site meetings. ·Instruct and train customers on functional operation of the equipment/system. Conduct simulations and answer questions. ·Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction. ·Complete project documentation in a timely manner. ·Adhere to all OSHA and SimplexGrinnell safety policies and procedures. Participate in a scheduled On-call rotation. ·Perform other duties as assigned. What we look for Required ·High School Diploma or Equivalent ·Three (3) years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems. ·Experience in reading and interpreting blueprints, submittals, and operational/product manuals. ·Experience with hand tools test equipment, multi-meter usage, digital analyzer and commissioning devices. ·Able to obtain and retain any licenses that are required by National, State and local codes ·Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. ·Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc. ·Ability to work flexible hours including weekends to meet customer requirements. ·Demonstrate a high level of customer service. ·Ability to lead & work well with team members. ·Ability to adhere to, implement, and follow safety guidelines and procedures at all times. · Strong organizational skills, positive attitude, and an ability to learn quickly. ·Possess a valid driver’s license and driving record that meets company requirements. ·Able to pass a pre-employment background and drug test. ·Ability to Overnight travel may be required. Preferred ·NICET Level II certification. ·Local State licenses. ·Knowledge of local Fire Codes#TechHiring

Be part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doReceive service calls from Service Resource Center, including a brief description of equipment/system malfunctions.Responsible for contacting customer representative and ascertain equipment/systems problems.Diagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sites.Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment.Service, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnell.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals.Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction.Complete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computers.Obtain customer signature upon completed service call assignment.Participate in a scheduled On-call rotation. Help to train or mentor others on the service team.Perform other duties as assigned.What we look forRequired5+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.Valid Fire Alarm LicenseExperience in reading and interpreting blueprints, submittals, and operational/product manuals. Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School Diploma or equivalentAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etcAbility to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and proceduresStrong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Retain any licenses that are required by National, State and Local codes.Completion of SimplexGrinnell 4120 Network training within 12 months PreferredNICET Level II certification strongly preferredJohnson Controls International plc. is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require accommodation during the application process, please visit www.johnsoncontrols.com/careers.Terms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.#TechHiring

Job DescriptionWhat you will doInstall, program, configure, commission and service Fire Alarm and Fire Suppression Systems including but not limited to; Simplex, Fike, Kidde, Inergen, Sapphire, FM-200, and CO2 as well as other related building system products at customer sites. How you will do itExecute projects on time and within allocated installation hours.Work with the project manager to resolve all discrepancies, and coordination problems that impair installation activities.Must be able to work on multiple projects simultaneously. Read and interpret complicated blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals. Coordinate the installation activities with all trades to optimize installation time. Attend all required site meetings. Instruct and train customers on functional operation of the equipment/system. Conduct simulations and answer questions.Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction.Complete project documentation in a timely manner. Adhere to all OSHA and SimplexGrinnell safety policies and procedures. Participate in a scheduled On-call rotation. Perform other duties as assigned.What we look forRequiredHigh School Diploma or EquivalentThree (3) years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.Experience in reading and interpreting blueprints, submittals, and operational/product manuals.Experience with hand tools test equipment, multi-meter usage, digital analyzer and commissioning devices.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Demonstrate a high level of customer service.Ability to lead & work well with team members.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Overnight travel may be required.PreferredNICET Level II certification. Knowledge of local Fire Codes

Here's what we have to offerCompetitive pay.Paid vacation, holidays, and sick time.Comprehensive benefits package, including retirement savings plan, medical, dental, and vision care – available from day one.Extensive product andon-the-job/cross-trainingopportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.What you will do:Under general direction, responsible for the service & repair, design, configuration, and operation of complete HVAC building control systems and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the customers and JCI goals. Accountable for quality, timeliness and efficiency of Service & repair and designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants,Sales and Service team and subcontractors.How you will do it:Designs, configures and services technically complex building control systems for the customers facility. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs necessary to operate the system per the customer's facility requirements.Coordinates and creates necessary drawings and equipment schedules for submittals, service and/or installation.Selects, orders, and tracks the delivery of materials for assigned jobs.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.Provides field change information to the team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with sales and service operations. Performs value engineering to provide cost effective results while maintaining customer satisfaction.May provide work direction to Service Controls Technician I and Senior I and Senior II Controls Technicians.Adheres to safety standards.A high degree of regard to employee and subcontractor safety.What we look for:RequiredMinimum of Ten (10) years of experience with programming, installing and/or commissioning controls systems including system-level controllers.Demonstrated knowledge of the construction, service mechanical, electrical, or HVAC service industry.Demonstrated knowledge and understanding of mechanical drawings, electrical wiring diagrams, control theory, automatic temperature controls, building automation systems and other building subsystems.Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., Modbus, LON, BACnet, etc.).Ability to relate technical knowledge to a non-technical audience.Demonstrated advanced computer skills required, particularly computer-related drafting tools, such as Visio.PreferredBachelor's degree in engineering, or an associate degree in a related technical field with seven years of relevant work experience required.Understanding of IP networking for building automation system

**SIGN ON BONUS ELIGIBLE****RELOCATION ELIGIBLE** What you will do Employees are responsible for the execution of the installation project plan including equipment delivery and interface with other trades to successfully complete projects while exceeding customer's expectations. How you will do itApplies specialized functional area skills and basic knowledge including underlying professional/technical principles or standards. Applies judgment based on practice and precedence. Frequently resolves problems through research of multiple alternatives. May allocate work as a team leader or check on completion or quality. Demonstrate supervisory/leadership abilities to include training, team building, and negotiation skills, district administration and effective interaction with customers. Perform and/or support the installation of fire related and/or other building systems products. Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational product manuals.Ability to program or experience with programing low voltage systems including fire alarm, nurse call, access control, security, CCTV, and clocks.Identify out of scope requests by the contractor or customer and be able to follow it up with RFIs with suggested solutions. Assist customers with all questions and concerns in a timely and professional manner. Ability to effectively communicate project status to management. Complete all appropriate Company paperwork as required.What we look forRequiredHigh School Diploma, GED, or equivalentActively start testing for NICET II in the first year upon hire.Knowledge to meet with code officials to arrange for personnel licensing, building permits and to discuss the intended wiring methods.Experience in meetings with contractors and owners.Knowledge of coordinating the project activities with other trades at the work locations to optimize installation time.Must be proficient in the use and application of industry related equipment including MS Office.Obtain any necessary Certifications or Licenses as required.Must have excellent communications skills, using tact and diplomacy when dealing with customers.Able to work in unusual and sometimes difficult positions such as climbing a ladder, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc.Capable of performing physical labor to include carrying and moving equipment and tools as required. Valid driver's license with a good driving record. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require accommodation during the application process, please visit www.johnsoncontrols.com/careers.#TechHiring

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insuranc401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technician and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all controls technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in the development and testing of software programs necessary to operate the system per the intent of the project requirements. Compiles and/or completes project as-built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program graduate, an Associate’s degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.#TechHiring