Quality Control Inspector Iin GAC SavannahUnique Skills:Must be able to obtain and maintain PQ qualificationsEducation and Experience RequirementsHigh School Diploma or GED required. 1 year quality inspection experience or 2 years GAC manufacturing experience required. 2 years manufacturing experience or equivalent aerospace experience preferred. Other Formal Inspection Training Program 90 Days required. Position Purpose:In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level.Additional Functions: Provide technical support to manufacturing personnel. . Perform area inspections to ensure compliance with applicable standards and specifications. . Participate in continuous improvement activities. .Perform other duties as assigned.Other Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment. #LI-JO1Additional InformationRequisition Number: 222581Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 10/04/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

JOB SUMMARY West Fraser is a diversified North American wood products company producing southern yellow pine lumber, OSB and wood chips across the Southern US and Western Canada. We are the largest lumber producer in North America! Our employees operate in a culture that values safety first and rewards hard work. We recognize and support our team culture and focus on growing our team by promoting from within – many of our employees have built their careers with us. At West Fraser, our Industrial Electrician is takes with repairing, replacing, installing, programming, and testing all electrical circuits and equipment. Occasionally, this role will be expected to perform or assist in repairs or installation of electrical controls systems. TASKS AND RESPONSIBILITIES: Perform preventative maintenance on electrical components of mill equipment.Repair, modify, and maintain a variety of electrical equipment.Wire circuits, replace components, and repair electronic devices.Perform tests using various measuring instruments to include multi-meter and Megger.Remain current in technical changes and equipment designs by attending necessary classes as required.Ability to work rotating shifts, including nights, holidays, weekends, and overtime as required.Willing and able to maintain strict adherence to safety rules, regulations, and guidelines to include the wearing of necessary PPE, the use of safety equipment, and completing all necessary training.Other duties as assigned by leadership. QUALIFICATIONS: Possess a High School Diploma or GED.Eligible to legally work in the United States without employer sponsorship.Have a strong background with proven work experience using electrical fundamentals.Understanding of 3-phase and single-phase power distribution systems, motor controls, and wiring.Experience with 480-volt power, logic circuits, and machine control systems.Proven understanding of electrical schematicsPossess advanced electrical and electronic troubleshooting skills.Ability to fully identify the features and functions of controllers and differentiate from pneumatic and electronic.Ability to identify the signal path through a control circuit.Willingness to work a 12-hour rotating schedule to include nights, weekends, and holidays.Willingness to work on an emergency, on-call, basis as required.Ability to work as part of a team to deliver value to the mill as a individual and as a whole.Willingness to cross-train to learn new jobs and skills. Be reliable and possess consistent and predictable attendance behavior. Our highly competitive compensation package and outstanding benefits include: Benefits starting Day 1Competitive starting pay Wellness Pay ProgramOn-the-job training andA culture that strongly believes in promoting from withinMedicalDentalVision 401k with company matchLife InsuranceDisability InsurancePaid vacations and holidaysSafety is one of West Fraser’s core values and our employees can expect a challenging, stable work environment with career development opportunities. Apply: If you are ready to build your career in a company that thrives on growth, internal promotions, training, safe work environment, rewarding work, challenge, and opportunity, come build your career with us at West Fraser: www.westfraser.com/jobs We thank all candidates for their interest; however, only those selected for an interview will be contacted. Please apply through our online application process. Be sure to attach your resume to your online profile as resumes will not be accepted at the site. No phone inquiries, please. West Fraser is a diversified wood products company producing lumber, OSB, LVL, MDF, plywood, pulp, newsprint, wood chips, and energy with over 60 facilities in Canada, the United States, and Europe. We are the largest lumber producer in North America, a leading global manufacturer of wood-based panels, and the world’s largest producer of oriented strand board (OSB). We are a growing company, believe strongly in promoting from within, and pride ourselves on providing a challenging environment with continuous development. The successful candidate should be interested in future growth opportunities within the company. West Fraser is an Equal Opportunity Employer M/F/V/D & Drug-Free Workplace

Req ID:443463Address: 11151 Hwy 280 E Ellabell, GA, 31308Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Aircraft Component Technician (Side Brace Repair)in GAC SavannahUnique Skills:Hiring for Multiple Shifts.Must be able to obtain and/or renew Respirator Certification upon hire.Familiarity with repairing and/or assembling a wide range of complex parts with the use of repair manuals along with engineering drawings, specifications, and dispositions.Work with supporting organizations to evaluate and determine the correct path forward as it relates to repair direction.Ability to read and use various precision measuring tools (calipers, micrometers, depth gauges, etc.) and work with close tolerance specifications.Education and Experience RequirementsHigh School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose:Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Maintain and utilize all required. paperwork in accordance with FAA RS requirements. Maintain a clean and orderly work area. Comply with all company and legislative environmental health and safety regulations.Additional Functions: Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . Assist with training and instructing of Acft Component Repair I Techs. . Resolves routine questions and problems, referring the more complex issues to higher levels. .Perform other duties as assigned.Additional InformationRequisition Number: 222210Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Aircraft Component Technician (Machinist)in GAC SavannahUnique Skills:Hiring for Multiple Shifts.Must be able to obtain and/or renew Respirator Certification upon hire.Machinist background preferred for this position as it relates to blending material and critical surface measurements.Familiarity with repairing and/or assembling a wide range of complex parts with the use of repair manuals along with engineering drawings, specifications, and dispositions.Work with supporting organizations to evaluate and determine the correct path forward as it relates to repair direction.Ability to read and use various precision measuring tools (calipers, micrometers, depth gauges, etc.) and work with close tolerance specificationsEducation and Experience RequirementsHigh School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose:Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Maintain and utilize all required. paperwork in accordance with FAA RS requirements. Maintain a clean and orderly work area. Comply with all company and legislative environmental health and safety regulations.Additional Functions: Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . Assist with training and instructing of Acft Component Repair I Techs. . Resolves routine questions and problems, referring the more complex issues to higher levels. .Perform other duties as assigned.Additional InformationRequisition Number: 222205Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Equipment Maintenance Tech IIin GAC SavannahUnique Skills:Must be able to PM, Trouble Shoot Industrial Equipment and Familiar with Voltages from 12V to 480V 3 PhaseEducation and Experience RequirementsHigh School Diploma or GED required. 3 years experience working with electrical controls and mechanical applications in a manufacturing environment. 2 year technical degree may offset one year of experience. Position Purpose:Under general supervision provides expertise with respect to electrical, hydraulic, mechanical, and pneumatic systems for troubleshooting, repairs, upgrades and preventative maintenance to all aircraft related production equipment.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Diagnoses cause of electrical and mechanical malfunction or failure of operational equipment and apply corrective action to resolve re-occurring issues. Proactively conducts Preventive and Predictive Maintenance inspections and performs required. duties in accordance with recommended schedules. Performs repairs and corrective maintenance to equipment with a high degree of quality and reliability so that the equipment is capable of operating within the required. specifications. Performs setup and calibrations on scheduled intervals for all aircraft related production equipment . Daily input of required. data in CMMS system for machine reliability and control.Additional Functions: Interfaces daily with key Management and Production personnel regarding all aircraft related production equipment. . Assists with Engineering acceptance testing and training. .Perform other duties as assigned.Other Requirements: Ability to work any shift. Background in CNC Equipment and GSE Equipment a plus. Must be able to read electrical schematics and blue prints. Must have excellent organizational skills with the ability to multi-task and meet deadlines as needed. Must have demonstrated working knowledge of electrical, mechanical, and controls aspects of factory automation systems and the integration of devices used. Working knowledge of replacing spindles, ball screws, linear guide ways, bearings, hydraulics repairs, and precision machine/laser alignments is a plus. A working knowledge of PC based Microsoft office. Experience with computerized maintenance management software relevant to spare parts management, work order creation, and Preventive Maintenance preferred. Additional InformationRequisition Number: 222571Posting Type: Internal-ExternalDepartment: J0471-FAC GSE AT ManageCategory: FacilitiesPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N8Number of Openings: 1Posting End Date: 10/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Equipment Maintenance Tech Srin GAC SavannahUnique Skills:Sr Tech must be able to read electrical Schematics, Be able to trouble Shoot CNC Equipment and Voltages from Control Voltages up to 480 Volt 3 Phase. Must have knowledge of Siemens and Allen Bradley PLC and Drives. Must be able to work all shifts. Shift opening is to be determined according to Vacancy.Education and Experience RequirementsHigh School Diploma or GED required. 5 years experience working with electrical controls and mechanical applications in a manufacturing environment, to include experience working with aircraft related production, equipment in the aerospace industry. 2 year technical degree may offset one year of experience. Position Purpose:Under minimal supervision provides advanced experience with respect to electrical, hydraulic, mechanical, and pneumatic systems for troubleshooting, repairs, upgrades and preventative maintenance to all aircraft related production equipment.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Diagnoses cause of electrical and mechanical malfunction or failure of operational equipment and apply corrective action to resolve re-occurring issues. Proactively conducts Preventive and Predictive Maintenance inspections and performs required. duties in accordance with recommended schedules. Performs repairs and corrective maintenance to equipment with a high degree of quality and reliability so that the equipment is capable of operating within the required. specifications. Performs setup and calibrations on scheduled intervals for all aircraft related production equipment. Regularly performs backups of process parameters and PLC programs for all equipment. Daily input of required. data in CMMS system for machine reliability and control. Ability to implement project objectives on key pieces of automated equipment with minimal guidance. Recommends or initiates modification or replacement of equipment components which fails to meet acceptable operating standards. Submits parts request on critical spares identified as non- stock items.Additional Functions: Interfaces daily with key Management and Production personnel regarding all Automated Equipment. . Assists with Engineering in all acceptance testing and training. .Perform other duties as assigned.Other Requirements: Ability to work any shift. Demonstrated working knowledge of electrical, mechanical, and controls aspects of factory automation systems and the integration of devices used. Knowledge of Programmable Logic Controllers (Allen Bradley & Siemens Controls preferred). Background in CNC Equipment (Mazak, Mori Seiki, Fryer, Alpha Harrison, Broetje, Kuka preferred). Background in GSE Equipment (Hobart, Unitron, Tronair, Lektro Tug preferred). Must be able to read electrical schematics and blue prints. Working knowledge of replacing spindles, ball screws, linear guide ways, bearings, hydraulics repairs, and precision machine alignments (Laser Alignment experience a plus). Experience in the alignment of turrets and the installation of ball screws is a plus. Working knowledge of PC based Microsoft office. Experience with computerized maintenance management software relevant to spare parts management, work order creation, and Preventive Maintenance preferred. Additional InformationRequisition Number: 219137Posting Type: Internal-ExternalDepartment: J0471-FAC GSE AT ManageCategory: FacilitiesPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 10/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Structural Mechanic Iin GAC SavannahUnique Skills:NoneEducation and Experience RequirementsHigh School Diploma or GED required. 1 year related structural assembly experience. Experience working with Solumina and Smarteam preferred.. One year experience credit considered for graduates of Savannah Tech Aircraft Structures Technical Certificate Program. Position Purpose:In a team oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets. Check all work and ensure a defective free assembly prior to final inspection. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Maintain a neat and orderly work area, supports the company 5S Program and complies with all safety regulations. Work under moderate supervision on duties and tasks. Support Lean Activities.Perform other duties as assigned.Other Requirements: Ability to read and interpret basic blueprints. Read and interpret 6" scale. Basic computer skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift 50 lbs. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas. Additional InformationRequisition Number: 222636Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/07/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Aircraft Component Technician III (Machinist)inGAC SavannahUnique Skills:Hiring for Second Shift: weekday afternoons/nights.CNC/Conventional Machining experience highly preferred.Education and Experience RequirementsHigh School Diploma or GED required. A&P license, FCC license, or NCATT cert preferred.. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 years experience in one of the following or other related exp: Sheetmetal , hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service. Position Purpose:Under minimal supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Apply advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, wattmeters, spectrum analyzers, and borescopes. Demonstrate expertise in the flow of materials and work order processes within the repair station. Maintain and utilize all required. paperwork in accordance with FAA Repair Station requirements. Maintain a clean and orderly work area. Comply with all company and legislative environmental health and safety regulations.Additional Functions: Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. . Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models . Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Assist with training and instructing of other Acft Compo Repair I and II Techs. .Perform other duties as assigned.Additional InformationRequisition Number: 222647Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 10/04/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Aircraft Component Technician II (Machinist)inGAC SavannahUnique Skills:Hiring for Second Shift: weekday afternoons/nights.CNC/Conventional Machining experience a plus.Education and Experience RequirementsHigh School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose:Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Maintain and utilize all required. paperwork in accordance with FAA RS requirements. Maintain a clean and orderly work area. Comply with all company and legislative environmental health and safety regulations.Additional Functions: Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . Assist with training and instructing of Acft Component Repair I Techs. . Resolves routine questions and problems, referring the more complex issues to higher levels. .Perform other duties as assigned.Additional InformationRequisition Number: 222646Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 10/04/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Senior Aircraft Component Technician (Machinist)inGAC SavannahUnique Skills:CNC/Conventional Machining experience highly preferred. Advanced knowledge in machine shop practices is a plus.Education and Experience RequirementsHigh School Diploma or GED required. A&P license, FCC license, or NCATT cert preferred.. Able to read & interpret blueprints, eng docs, CMP data, CBs and ASCs. Proficient in operation of all tools & equip in dept. Basic understanding of shop math. 6 years experience in one of the following or related exp: Sheetmetal and/or hydraulic overhaul. Avionics/elect compo repair, accredited schooling in electronics and elec sys may offset some exp reqmts. APU removal, install, and service. Position Purpose:Working with a high degree of independence, provide leadership and technical guidance while performing the repair and overhaul of internal and external aircraft assemblies, subassemblies and components in accordance with GAC Repair Station requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Mastery of advanced skills, procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Duties and tasks reflect substantial variety and complexity. Showing superior technical skill and competence, perform, instruct, and oversee repair of mech and elect assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, eng dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up and operate necessary test equipment in accordance with required. doc to perform functional and operational tests of mech and elect acft components for return to service or for initial cert for new products. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Showing superior tech skill, remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate mastery of repair techniques and concepts using acceptable practices including troubleshooting, soldering and application of protective coatings. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspect tools. Maintain and utilize all required. paperwork in accordance with FAA Repair Station requirements. Mastery of shop material and component flow through via work orders in accordance with Repair Station requirements. Comply with all company and legislative environmental health and safety regs.Additional Functions: Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. . Fabricate and repair sheetmetal and associated mech parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mech means. . Remove & install APUs and perform all required. APU maintenance for ALL GAC acft models. . Provide tech support to Customer Support Coordinators and Tech Services. . Perform complex troublehshooting and subsequent repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Perform, in conjunction with QC Reps, mass weight and balance on repaired flight controls using blueprints and required. FAA Repair Station forms. . Assist with training Acft Component Repair Techs. .Perform other duties as assigned.Additional InformationRequisition Number: 222649Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/04/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Patterson isn't just a place to work, it's a partner that cares about your success.One of the distinguishing marks of our company is the talented people who embrace the people-first, always advancing, and results-driven culture. Professional growth abounds in this motivating environment. We value the diverse talents and experiences our employees bring to Patterson and believe that they build a stronger and successful organization.Provides repair and on-site installation on a variety of Veterinary equipment. Learns and follows manufacturer guidelines relative to the operation, repair, maintenance and installation of equipment.Essential FunctionsTo perform this job successfully, an employee must be able to perform each essential function satisfactorily, with or without reasonable accommodation. To request a reasonable accommodation, notify Human Resources or the manager who oversees the position.Install, Maintain and/or Repair Veterinary EquipmentIndependently responds to assigned customer service calls, diagnosing problems and making appropriate repairs.Repairs, loads, delivers, installs, and specs equipment to meet specific manufacturer, Federal and State regulations.Trains to perform standard system installations and tests the functionality of all components.Trains customers on the use and basic maintenance of equipment at the customers site.Learns and follows specific manufacturer guidelines for repairs as well as all company, OSHA, or other agencies' policies related to asepsis.Completes all required service forms (service order, confirmations, inventory, expense reports, time sheet, and equipment related items).Maintains strong and supportive customer relationships by providing technical support after initial installation of Equipment, PC software, and hardware and ensuring that service commitments are met within standard response time.Maintain relevant communication with Service Coordinator, Equipment Specialist and Territory Manager.Inventory ManagementDetermines parts, supplies or tools needed to complete service requests.Uses, maintains, and secures test devices and tools used to adjust, calibrate, and repair equipment.Manages vehicle inventory and restocks as necessary.Physical inventory audits on a bi-annual basisAsset ManagementEnsures proper vehicle maintenance guidelines and safe driving habits are followed.Ensures proper use and maintenance of all company provided assets, including but not limited to phone, computer, parts, tools and uniforms.Required QualificationsHigh school diploma or equivalent.0-5 years prior experience in a Veterinary/Medical/Dental environment.PC skills in Windows based programsMust maintain a valid driver’s license and good driving record.Strong customer service skillsMotivated team playerPreferred QualificationsAt least 4 years of experience as a Certified, Licensed or Registered Veterinary Technician will be considered.Previous X-Ray experience preferredSAP experienceExcellent organizational and problem-solving skillsCarpentry/plumbing/heating/electrical/electronic related experience.Technical training in Bio-med/electronics or related technical field.Working ConditionsPhysical DemandsLifting or Carrying: Frequent to continuous heavy physical activity – lifting up to 100 poundsSitting or Standing: Light physical activityUse of Hands: Occasional or frequent moderate physical activityClimbing: Light physical activityOperating a computer or other office device (Laptop 1 hour per day)Talking or hearing -- "position involves frequent communication with (customers, inside staff, etc.) and requires ability to understand and effectively exchange accurate information"Reading or sight -- "requires frequent review of vendor contracts"Environmental FactorsHazardous chemicalsBiohazard materials or wasteHigh voltageConfined spaces (if installation or maintenance typically involves accessing wires in sub-floor crawlspace)This position requires traveling to customer locations and providing services and support to customers.Travel and On-callThis position requires overnight travel.What's In It For You:We provide competitive benefits, unique incentive programs and rewards for our eligible employees:Full Medical, Dental, and Vision benefits and an integrated Wellness Program.401(k) Match Retirement Savings Plan.Employee Stock Purchase Plan (ESPP).Paid Time Off (PTO).Holiday Pay & Floating Holidays.Volunteer Time Off (VTO).Educational Assistance Program (Tuition Reimbursement).Full Paid Parental and Adoption Leave.LifeWorks (Employee Assistance Program).Patterson Perks Program.EEO StatementAs a people-first company, Patterson promotes a culture that embodies and celebrates diversity and inclusivity. We believe our employees’ unique experiences and differences is what strengthens us and drives our success. We consider all qualified applicants without regard to race, religion, color, sex, national origin, age, sexual orientation, gender identity, disability or veteran status.We are Patterson. We welcome you.

Avionics Technician Leadin GAC SavannahUnique Skills:G500 / G600 / G650 experience prefered. This is a fourth shift position.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience on large/mid-size aircraft. 8 years experience in aircraft avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and six (6) years related experience. FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. FCC license or NCATT certification preferred. Position Purpose:Plans and coordinates all electrical/avionics activities and provides customers with daily information on aircraft schedules, repairs, parts, components shipped to vendors, etc. Works with hangar management to coordinate electrical/avionics activities and schedule aircraft requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plans, schedules, and completes tasks on work authorizations in order to meet the master schedule. Provides daily status reports and progress schedules to management. . Coordinates efforts of Electrical and Avionics activities to meet aircraft schedules and deadlines. Reviews work, including forms and records, to ensure compliance with Site Inspection Procedures Manual, Site Operating Procedures and FARs. . Supervises and instructs electrical technicians with technical guidance and proper procedures of troubleshooting electrical/avionics systems, routine inspections and preventive maintenance. Provides input to subordinate performance appraisals and submits them to management for review. . Reviews daily job charging for all personnel (including support groups) to ensure accuracy of inputs. . Maintains a preventive maintenance program on test equipment, hand tools, and special tools. Maintains a current knowledge of Aircraft Service Changes (ASC), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Supervises a continuous safety program in hangar area which includes operation of support equipment, aircraft systems and general housekeeping. Maintains required. logs and records. Enforces the company FOD, tool control, 5-S programs and all safety regulations. . Able to adapt to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Establishes and fosters an environment of innovation and Lean oriented thinking. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must have thorough knowledge of aircraft systems, troubleshooting, technical manuals systems, and aircraft maintenance records system. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret electrical/avionics system drawings and blueprints. Must have demonstrated leadership ability. Excellent communication skills, both verbal and written. Demonstrated ability to plan, organize, implement and obtain objective with minimal direction. A good understanding of PC, Windows and main frame computer applications including the use of standard computer word processing programs (i.e. Microsoft Word) and appropriate typing skills a plus. Must be able to climb ladders and stairs, work in small-space restricted area, and lift up to 100 pounds. Ability to use hand tools and avionics test equipment. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220930Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Mechanic Team Leadin GAC SavannahUnique Skills:G500 / G600 / G650 experience prefered. This is a 4th shift position.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisithttps://outsidegulfstream.com/benefitsto learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220929Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Interior Installation Tech Srin GAC SavannahUnique Skills:AIRCRAFT INTERIOR INSTALLATION AND MODIFICATION EXPEREINCE HIGHLY DESIRABLE.GULFSTEAM INTERIOR EXPEREINCE PREFFERED.THIS IS A FIRST SHIFT POSITION.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of application installation, fabrication or related experience. preferred. Aerospace industry experience. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Fluent in the English language. Must have the ability to read, write, speak, and understand English. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Additional InformationRequisition Number: 222508Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician IIin GAC SavannahUnique Skills:This position is for Weekend Days (3 12s Friday Saturday and Sunday 5:30am to 6pm). Must be willing to work OT. Must be willing to work in tight spaces, at heights and around live aircraft.Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 222433Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:n/aEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 222424Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:n/aEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 222424Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Srin GAC SavannahUnique Skills:Multiple shifts available. Must be willing to support flight operations on multiple models of AC. Strong live AC avionics experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 222290Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics/Electrical Technician IIin GAC SavannahUnique Skills:This position is for Weekend Days (3 12s Friday, Saturday and Sunday 5:30am to 6pm). Must be willing to work OT. Must be willing to work in tight spaces, at heights and around live aircraft.Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 222434Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:n/aEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 222424Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/10/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Sheetmetal Tech Srin GAC SavannahUnique Skills:Sheet metal fabrication experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of sheetmetal and/or fabrication experience. Experience in aerospace industry preferred.. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP). . Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Work closely with lead to develop and implement process improvements that increase safety, reduce cost, cycle time, and man hours. . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Coordinate with other disciplines concerning projects. . Perform Lead responsibilities, as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of sheetmetal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand proficiently the English language. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with MicroSoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222293Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Sheetmetal Tech IIin GAC SavannahUnique Skills:Sheet metal fabrication experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication experience. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). Assist in monthly 5S audits. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.). . Properly use and maintain company-provided tools and equipment and returns items to tool room after use. . Ensure standard operating procedures are followed when operating ground support equipment. . Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Ensure accurate daily job charging to the aircraft. . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. . Assist in maintaining shop equipment and associated JSAs. .Perform other duties as assigned.Other Requirements: A working knowledge of sheet-metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb) is required. Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with sheetmetal installation and fabrication work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with Microsoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222292Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics/Electrical Technician Srin GAC SavannahUnique Skills:G500/G700 experience preferredEducation and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 222426Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 10/08/2024Equal Opportunity Employer/Veterans/Disabled.#LI-CH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Upholsterer - Flammability Tech 1in GAC SavannahUnique Skills:Strong sewing/upholstery skill required. Experince in sewing & constructing Flammability oil-burn test cushions a plus.Education and Experience RequirementsHigh School Diploma or GED required. Experience working on aircraft preferred. Knowledge of FARs and ODA/FAA Conformity requirements desired. Position Purpose:Acquire accurate information pertinent for fabrication and Inspection of flammability test samples required. to show proof of flammability for materials used in the aircraft during the completion interior installation.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for some Quality Control inspection pertaining to flammability issues for the ODA and Repair Station . Responsible for some review of aircraft documentation . Complete flammability request forms for the fabrication of test samples . Fabricate flammability test samples as required. Keeps accurate, neat and legible records of the work performed on aircraft . Writes discrepancies and keeps track of all work order documents . Completes turnover for the succeeding individual to assure continuity of process .Additional Functions: Assures completion of projects on assigned aircraft . Completes turnover for the succeeding shift to assure continuing inspection responsibility .Perform other duties as assigned.Additional InformationRequisition Number: 221802Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 08/12/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JC1

Upholstery Tech Srin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years experience in upholstery to include two (2) years aircraft upholstery experience or 6 years commercial upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Position Purpose:Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Fabricate and install seat covers, curtains and various assemblies and subassemblies. Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. Work with design/drawings to cut and install advanced custom design carpets with unique patterns.Additional Functions: Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. . Conduct safety audits and assists team members in doing safety audits. . Assist in maintaining shop equipment and associated JSAs. . Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). . Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required. levels of safety, quality and productivity. . Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. .Perform other duties as assigned.Other Requirements: Possess a working knowledge of Gulfstream inspection and process specifications and terminology. The ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221934Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Certification Inspector A&Pin GAC SavannahUnique Skills:Airframe and Powerplant license required.Education and Experience RequirementsHigh School Diploma or GED required. 7 years aircraft inspection experience to include 3 years inspection experience on large or mid-size aircraft (or same type and complexity as GAC aircraft). A&P (FAA Airframe and Powerplant) license required. ASQ certificate (American Society for Quality) preferred. Other Inspection Authorization (IA) preferred. Other DAR/DMIR/ODAR/ODA-Unit Member in good-standing preferred. Position Purpose:Performs airworthiness and certification inspections in a timely manner to ensure aircraft and/or component airworthiness. Physically inspects aircraft, components, and reviews related documentation to ensure workmanship meets acceptable standards of quality and customer aircraft/components are returned to service in an airworthy condition with all required. documentation properly completed and filed. As an ODA Inspection Authorized Representative (IAR) or FAA Designee, works as a part of Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/ODA requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Performs inspection and airworthiness inspection duties utilizing accepted/approved data including QC/QA procedures, instructions, and other related documents. Conducts first article inspections to ensure compliance with FAA and/or ODA approved procedures and ensures all associated records are completed . Performs inspections and certifies acft/component as airworthy prior to delivery and Return to Service . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on aircraft during maintenance or outfitting . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Ensures aircraft/components are airworthy prior to any flight activities . Issuance of FAA 8130-3 Forms in accordance with FAA/ODA requirements for authorized functions and activities to include conformity, prototype, export, and 14 CFR Part 43 Return to Service activities . Performs certification inspections to type design requirements in support of acft/component certification . Monitors repair station compliance to the requirements of 14 CFR Part 145 and the FAA accepted site Repair Station and QC Manuals . Develops and approves acft log book entries relating to acft configuration and installations . Performs FAA acft/component certification activities as an IAR . Manages Product/Article certification activities . Provides technical support to inspection personnel supporting FAA and/or ODA documented requirements . Supports coordination of inspection workloads .Perform other duties as assigned.Other Requirements: Competent in use of all job related tools and equipment. Proficient in blueprint/drawing reading, use/interpretation of Maintenance Manuals, CMP, ADTS, Travelers, Customer Bulletins, Airworthiness Directives, test specifications and other manufacturing/inspection related documentation. Must possess working knowledge and application of Quality Assurance or Quality Control systems and methodologies. Must possess a verifiable working knowledge of FAA Regulations, Orders, and other guidance pertinent to issuance of export airworthiness approvals & conformity determination as defined in FAA Order 8100.8D Appendix A (as revised) and 8100.15 (as revised). Able to complete FAA/ODA initial/recurrent designee training within established timeframe to include obtaining a passing certificate as part of IAR application process. Must be capable of obtaining IAR designee appointment within established timeframe depending on Airworthiness and Conformity function code(s) required. for position. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221042Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Airworthiness Inspector Sr A&Pin GAC SavannahUnique Skills:First Shift Monday through Thursday.Gulfstream Mid/Large Cabin Experience Preferred; Flight Safety Initial Preferred but not Required; Must be Able to Lift 50 Lbs, Must be Able to Work from Ladders, Stands, and Heights; Must be able to Occasionally Work in Confined Spaces; Must be Proficient with Computers.Education and Experience RequirementsHigh School Diploma or GED required. 6 years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft. Airframe and Powerplant License required. Position Purpose:The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all quality control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation. .Additional Functions: Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. . Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. . Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. . May perform ODA functions as assigned. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. Familiar with FAA certification approval processes. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221642Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Sheetmetal Tech Sr - Special Missionsin GAC SavannahUnique Skills:Must have strong sheetmetal skillsMust be famaliar with paper blueprintsMust be able to work weekend shiftEducation and Experience RequirementsHigh School Diploma or GED required. 4 years of sheetmetal and/or fabrication experience. Experience in aerospace industry preferred.. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP). . Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Work closely with lead to develop and implement process improvements that increase safety, reduce cost, cycle time, and man hours. . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Coordinate with other disciplines concerning projects. . Perform Lead responsibilities, as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of sheetmetal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand proficiently the English language. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with MicroSoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221122Category: OperationsPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Senior NDT Technicianin GAC SavannahUnique Skills:Overall Job ExpectationsNDT supervised OJT logbook with signaturesNDT formal training certificationsMust be able to work any/all shifts; unscheduled overtimeMust be able to pass all certification exams within a reasonable period of time (typically within one month of start date)Preferred:NDT certification in Ultrasound (UT) and Radiograpy (RT)NDT certification in one of the otherprimary methods: Eddy Current (ET), Magnetic Particle (MT), Liquid Penetrant (PT)Ability to read and interpret blueprints and catia drawingsMicrosoft Office programs, to include Excel, Power Point, and AccessSoluminaSAPAutomated NDT Testing Equipment (Squirter/TTU; Immersion)Education and Experience RequirementsHigh School Diploma or GED required. 4 years of NDT related experience required.. Certified in 2 NAS 410 NDT methods required. and must be able to be certified in a third method within 1 year. . Other Certification in more than 2 NAS 410 NDT methods preferred. ASQ certificate (American Society for Quality) preferred. Position Purpose:In a team oriented environment, performs all tasks in area of responsibility in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies and installations are built to type design dataJob DescriptionPrinciple Duties and Responsibilities:Essential Functions: Performs non-destructive tests (NDT) and determines product acceptability to the authorized limits of the NDT level obtained in accordance with prescribed methods and procedures . Records, organizes and evaluates test results and enters results into applicable documents . Ensures compliance to all radiation safety rules and regulations and provides protection to self and others during testing . Maintains equipment and assures calibration for tests to be performed . Maintains inventory control of area equipment .Additional Functions: Works with and assists other NDT Technicians as required. . Coordinates NDT inspection workload according to priorities, efficiency and cost effectiveness . Provides technical assistance to subordinate level NDT technicians . Performs process control on area inspection equipment . Performs exposure room interlock safety checks, establishes radiation safety barriers, zeros pocket dosimeters, operates radiation survey meters and completes applicable survey logs and forms . Performs automated ultrasonic C-scan inspection of composite parts . Must be available to work any shift .Perform other duties as assigned.Other Requirements: Must provide formal NDT training records. NDT experience on determining product acceptability preferred. Experience in blueprint reading and interpretation. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal and communication skills. Must demonstrate good housekeeping and safety practices. Proficiency in current computer-based software. Must be able to lift and transport objects up to 40 pounds. #LI-KP2Additional InformationRequisition Number: 222117Category: Quality AssurancePercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Seniorin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221090Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Iin GAC SavannahUnique Skills:Ability to work first or second shifts and overtime.Education and Experience RequirementsHigh School Diploma or GED required. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 221683Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft