Avionics Installer IIin GAC St. LouisUnique Skills:This is a back shop position for Systems Integration.Education and Experience RequirementsHigh School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience. Knowledge of applicable regulatory requirements and customer specifications. Ability to read and interpret basic blueprints and schematic diagrams. Position Purpose:Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Maintains required. logs and records. . Completes tasks within allotted time frame. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Checks all work and ensures a defective free assembly prior to final inspection. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. . Maintains a neat and orderly work area.Additional Functions: Properly care for and maintain shop equipment and tools as assigned by Supervisor. . Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.) .Perform other duties as assigned.Other Requirements: Strong written and verbal skills required. Computer skills and general software knowledge necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222089Posting Type: Internal-ExternalDepartment: J2292-Compl FinishCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N8Number of Openings: 2Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-RF1

Job InfoJob Location: Belleville, ILRoute Type: LocalType of Assignment: DedicatedHours Per Shift: 8 HoursHours Per Week: 40 HoursShift Start Time: 06:00 amWorking Days: Mon-FriTransmission Type: AutomaticJob RequirementsCDL Class: Non CDLExperience: 1+ yearAdditional InformationWe are seeking a Diesel Mechanic in Belleville, IL. This job is offering $1,300 - $1,500 per week.Our Diesel Technicians generally assist in the repair and diagnosis of major components or remove/replace major components of various truck and trailer equipment.Expectations of our Diesel Technicians include the ability to diagnose and repair the following with little or no supervision:ClutchesPTO SystemsElectric SystemsHydraulic/ Air Brake systemsHeating/ Air Conditioning SystemsInstruments and GaugesPreventive Maintenance ServiceQualifications for our Diesel Technician positions:2 - 4 years practical experience with tractor trailer maintenance requiredVocational/Technical or certification preferredProficiency in the use of shop tools requiredA valid drivers license is required - current CDL license with air brake certification preferred, willingness to acquire CDL if you do not have oneBasic computer skills preferred for data entry into maintenance systemsRegular, predictable, full attendance is an essential function of the jobAbout the CompanyDrive360 Logistics is your leading source for logistics jobs. We have the largest best selection of Local and Regional Trucking Jobs. We also specialize in Mechanics and Warehouse Jobs. We have the best jobs in the industry. Apply Now!

Job Description Job Title:Automotive Technician / MechanicLocation: 100 Prosperity DriveO'Fallon, MO 63368Job Overview:This brand-new state-of-the-art facility is scheduled to open in September 2024. Interviews will begin in August 2024.We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what’s right for our customers.Responsibilities include, but are not limited to:Technicians use their knowledge & skills to diagnose and fix vehicles for our customersContinuously build experience as an automotive mechanic across a wide range of domestic and foreign vehiclesComplete full, accurate, and honest courtesy vehicle inspectionsWork as part of a team to troubleshoot customer concerns quickly and effectivelyFollow and promote our high standards of safety, cleanliness, and organizationWork closely with the service department and effectively communicate customer concernsWork together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications:Positive attitude and a desire to serve customers3+ years of experience as an automotive technician/mechanicASE Certifications preferred, or a plan to achieveCapable of diagnosing and repairing all makes/models of vehiclesMeet or exceed hourly goalsAptitude for learning additional skills and processesProfessional appearance and strong communicationA desire for long-term career developmentPhysical Requirements:Occasionally lift and/or move over 100 poundsBe able to work with tools on vehicles lifted above their headWork in tight spaces as dictated by the vehicle’s needed repairHave the needed dexterity in order to efficiently use hand toolsWalk/stand for the majority of their workdayDrive manual transmissions vehiclesEfficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 290+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center.All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices.

Req ID:443480Address: 9191 State Route 140 Hamel, IL, 62046Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

BluSky Restoration wants to hire YOU as a full-time Restoration Technician. This position has a starting pay of up to $25 an hour,depending on experience!Benefits Include:Medical, Dental, and Vision Insurance401K Plan with guaranteed matchPaid Time Off and HolidaysLife & Disability InsuranceEmployee Assistance ProgramsHealth and Wellness ProgramsBluSky apparelWhat does a Restoration Technician do They fix broken buildings!Whether it's a broken pipe or a major storm, when people have an emergency, they turn to us. That's where YOU come in - you'll respond to emergencies and restorethe lives of our customers.At BluSky, our core values are Excellence, Teamwork, Integrity, Innovation, Empathy, Passion, and, most of all, FUN!We are a culture of family.Previous experience and IIRC certifications are a plus but not required. We will help you obtain the training and development you need.Brief Description:The Restoration Technician is a first responder on property loss situations and helps mitigate damage in residential and commercial structures. Technicians are responsible for water damage mitigation, structural board-up and security, on-location cleaning, microbial remediation, content pack-outs, content processing/deodorization, content storage, and handling.Responsibilities:Water extraction and mitigationFire and smoke cleaning and restorationMicrobial remediationVandalism, crime scene, and biohazard clean-upDemolition (Demo Day!)Field management and supervision of all temporary labor personnelProvide the highest level of customer service with empathyAll other duties or projects as assignedQualifications:Possess and maintain a valid driver's licenseSuccessfully pass a national criminal background check and motor vehicle report background checkSuccessfully pass a pre-employment drug screeningAbility to be on-call 24 hours a day1 year of restoration industry or maintenance experience preferredWORK ENVIRONMENT AND PHYSICAL JOB DEMANDS:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the work environment is usually quiet.The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.The employee must occasionally lift and/or move up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit, use hands and fingers, reach with hands and arms, talk, and hear. The employee is required to move and walk around the office regularly.TRAVEL:Occasional travel. (Less than 25% of the time.) Some out-of-area and overnight travel may be expected for training or meetings.COMPENSATION:BluSky offers a competitive base pay between $15 - $25 per hour and a comprehensive benefits package that includes: a matching 401(k) plan, health insurance (medical, dental, and vision), paid time off, paid holidays, disability, equipment appropriate to the position (i.e., laptop, smartphone, etc.), and corporate apparel allowance.EEOC:BluSky is dedicated to the principles of equal employment opportunity. BluSky prohibits unlawful discrimination against applicants or employees on the basis of age 40 or over, race, sex, color, religion, national origin, disability, genetic information, sexual orientation, or any other applicable status protected by Federal, State, or local law.It is and will continue to be the policy of BluSky that all persons are entitled to equal employment opportunity based on their individual qualifications, performance, and potential without regard for any protected status, as required by state and federal law.

What this job involves: The Maintenance Technician will perform both preventative maintenance & corrective maintenance to mechanical, electrical, and plumbing equipment/systems in assigned facilities. Assists Mechanics in maintenance and repair efforts, as well as independently performing defined tasks. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.What your day-to-day will look like: Clean HVAC coils, change filters and belts.Maintain and repair locks, locking mechanisms, closers, doors, and furniture.Maintain and complete documentation for fire extinguishers and other building systems.Maintain and repair plumbing components including toilets, urinals, lavatories, flush valves, sinks, drains, water heaters, piping, and sump pumps.Prepare, prime and paint building interior and exterior surfaces and perform general handyman tasks to maintain buildings.Completes special tasks that include but are not limited to; painting, locksmith work, tenant services requests, and general maintenance as assigned.Prioritizes all PM’s, corrective and emergent work orders for the site (annual, monthly, weekly, and daily).Update work order status in real time, utilizing CMMS system.Escalating problems or issues to Customer and Manager in a timely manner.Desired or preferred experience and technical skills: EPA Universal LicenseBAS experiencePreventative maintenance on HVAC equipmentRequired Skills and ExperienceHigh School Diploma or equivalent.Experience with hand tools and power tools.Proficient in basic computer application software such as MS Office, Outlook, CMMS (Maximo), etc.Minimum 1 year of related experience and/or training in the areas of carpentry, electrical, and plumbing.#OEjobs

RESIDENTIAL MAINTENANCE TECHNICIAN-PROPERTY MANAGEMENT Company Vehicle Provided VineBrook Homes is an internally managed real estate investment company, focused on acquiring, renovating, leasing and operating single-family homes as rental properties. An early investor and developer of the Single-Family Rental home (SFR) asset class, we commenced operations in late 2007. Our proven, yield-focused investment strategy targets a unique opportunity building a portfolio of workforce SFR assets in key secondary and tertiary markets. Our growing SFR REIT portfolio is currently comprised of approximately 15,000 homes. VineBrook Homes is undergoing a major expansion of its strategy, expecting to drive toward 25,000+ homes. We are currently seeking a qualified residential Maintenance Technician to perform maintenance on single family homes. Successful candidates will be hard working, reliable, ability to work independently or as a team. We are seeking candidates who desire a long term career opportunity with a successful company in the residential services industry. SUMMARY Residential Maintenance Technicians are responsible for the upkeep and repair of our properties. They must be able to work unsupervised while performing quality repairs to HVAC, electrical, and plumbing systems. They must be able to diagnose and troubleshoot problems. Customer service is very important and must be displayed at all times. Documentation is done via smart devices such as provided smartphones and tablets. REQUIRED EDUCATION AND EXPERIENCE High school diploma or equivalent. HVAC Certification preferred but not required 2-5 years' experience in the maintenance field. Proficient at using a smartphone and computer. ADDITIONAL REQUIREMENTS Must have own tools, we provide larger/specialized equipment. Valid Driver's License. Pass a Motor Vehicle, Drug Screen, Credit, and Criminal Background Check. Please be aware that a positive test could render you ineligible for hire. This includes positive tests for medical and recreational Marijuana. Candidates from states who have legalized Marijuana for medicinal and recreational use; VineBrook Homes, LLC considers this a positive result for an illegal substance. ADDITIONAL INFORMATION/BENEFITS We offer paid PTO, Health insurance, Life insurance, Supplemental Insurance, Dental and Vision coverage, as well as a 401(k) with matching and paid time off. We are an equal opportunity employer OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. We recognize that people come with a wealth of experience and talent beyond just the technical requirements of the job. If your experience is close to what you see listed here, please still consider applying. Diversity of experience and skills combined with passion is a key to innovation and excellence; therefore, we encourage people from all backgrounds to apply to our positions. Please let us know if you require accommodations during the interview process. VineBrook Homes LLC (“VineBrook”) is proud to be an equal opportunity employer that is committed to diversity and inclusion in the workplace. VineBrook considers all applicants for employment without regard to race, color, sex, sexual orientation, gender, gender identity, age, religion, national origin, pregnancy, child or spousal support withholding, disability, marital status, genetic information, citizenship/immigration status, military/veteran status, or any other status protected by federal, state, or local law. VineBrook makes hiring decisions based solely on qualifications, merits and business needs at the time. Upon request, VineBrook will reasonably accommodate applicants with a disability who need accommodation during the application process, unless accommodation creates an undue hardship to the company. We are also a Drug Free Workplace. As permitted by law, qualified applicants will also be required to pass a drug screening before beginning employment.

Job Title: Service TechnicianFLSA Status: Non-ExemptDepartment: Loram TechnologiesReports to: Assistant Manager, Field Services LTIGENERAL DESCRIPTION / PURPOSE:The Service Technician position is responsible for providing customer service and maintenance functions to Loram customers within a specific region. Maintaining unit uptime to customer expectations is critical to customer satisfaction, railroad fuel economy, and railroad’s wheel/rail life.New Hire Training Incentive: $1000 at 90 days & $1500 at 6 months (dependent on job performance).ESSENTIAL JOB FUNCTIONS:Customer FocusBuild customer and supplier relations for improved products and services.Work with Sales Department to ensure customer expectations are met.Functional/Technical SkillsService top of rail and gauge face lubricator units to specified guidelines.Perform lubrication service program for railroad customers.Uses logic and methods to solve problems to find effective solutions.Understand and adhere to general railroad and Loram operating rules.Managing and Measuring WorkManage inventory held on maintenance vehicle through company processes.Plans work based on length and task difficulty, develops schedules, and anticipates and adjusts for problems to meet objectives.Able to work independently.Written CommunicationProcess work orders and complete all necessary delivery tickets, warranty paperwork, and returns through approved company processes.Proactive problem resolutionBEHAVIORAL COMPETENCIES:CommunicationBuilding Customer LoyaltyDecision MakingCustomer FocusPlanning and OrganizingWork StandardsREQUIRED QUALIFICATIONS:Experience: High School Diploma/ EquivalentLicenses/Certifications: Maintain railroad safety training and certificationsAbility to obtain a CDL.PREFERRED QUALIFICATIONS:Education: Associate degree in Electrical or MechanicalExperience: 1+ years of Field service experience with customer facing role2+ years working in a railroad environment, Field service, and Basic computer skillsWORKING CONDITIONS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.100% travel, using any method of transportation. Adequate transportation to and fromAbility to lift and/or move up to 50 pounds.Ability to apply high levels of cognitive, analytical, retention and reasoning.Excellent communication skills used within any social context.Can stand, sit, walk, reach, balance, stoop, kneel, hear, taste and smell.Can see up close, distances, colors and has use of peripheral vision and depth perception.Can tolerate variable and sometimes extreme physical conditions during visits or inspections of company equipment in a railroad environment.Loram is an Equal Opportunity Employer and will make all employment-related decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, marital status, familial status, status with regard to public assistance, membership or activity in a local commission, protected veteran status, or any other status protected by applicable law.Rev: October 2023#LI-RL1

The Maintenance Technician II supports the FedEx Industrial Maintenance for material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues.ESSENTIAL FUNCTIONSProvides preventative and predictive maintenance and repair of material handling systems through demonstrated competency of two or more specialty skills of mechanical power transmission and/or electrical and/or PLC/controls with basic welding/fabrication skills.Ability to troubleshoot, diagnose and repair mechanical and electrical problems and failures within the material handling system but rely on higher level technicians and/or management to make final decisions on more complex issues.Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns.Responds to sort calls to diagnose problems and make repairsMay troubleshoot multiple component issuesAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data.Somewhat complex skills required in diagnosing and troubleshooting mechanical failuresMay rely on higher level Technicians to assist in more complex troubleshooting and issuesMay be involved in smaller scope projectsMay be required to work a flexible schedule including all days and shifts as the business need dictatesPerforms other duties as assignedExamples of what you may learn while in the Tech II level (does not include all areas/responsibilities)MechanicalIdentify what component of a conveyor (bearing, pulley, etc.) has caused a conveyor belt to become tracked incorrectly and repair/replace it.Diagnose a power transmission failure by determining which component has failed, such as motor failure, gearbox failure, or possible locked up pulley or rollerAbility to read and interpret mechanical drawings and manualsElectricalAbility to use a digital multimeter on AC/DC voltage, continuity, and resistance settings to find failed components and shorted wires.Ability to test a relay or contactor to determine which contacts are bad, not just that the component itself has failed.Ability to read and interpret electrical drawings/schematics and manualsPerforms other duties as assignedPLC/ControlsOpen PLC programs offlineTroubleshoot electrical controls issues utilizing the I/O lights on a PLCWelding or FabricationMIG and stick weld in multiple positions (vertical, overhead, etc.)Weld new parts together using appropriate rods, wire, gas, etc.Fabricate basic parts such as a guard or bracketUse oxygen/acetylene torchMINIMUM EDUCATIONHigh School Diploma or GED requiredCertificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred.MINIMUM EXPERIENCETwo (2) years experience in Industrial Maintenance/Mechatronics with competency in at least two specialty skills in mechanical power transmission, electrical, or PLC/Controls, with basic welding/fabrication skills required.Related military experience will be considered.In lieu of experience, an associate degree in an Industrial Maintenance/electrical/mechanical trade or related certificates or other degrees may be considered equivalent.Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experienceKNOWLEDGE, SKILLS AND ABILITIESAbility to follow procedures as directed by work orders or high-level technicians/managementAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed dataAbility to solve basic mechanical or electrical problems, which may include understanding of basic engineering formulasAbility to diagnose mechanical power transmission and electrical issues by troubleshooting at multiple component levelEffective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needsAbility to follow detailed instructionsSoftware skills, including Microsoft Office suite and other web-based applicationsPossess time management and organizational skillsJOB CONDITIONSWill need to use hand tools and possibly power toolsMay be working in hot or cold temperaturesMay need to stand, walk, bend, stoop and squatPreferred Qualifications: Pay Transparency: Salary range $21.95 - $33.45 -pay is based on experience.Pay: Additional Details: $1,000 sign-on bonus *other restrictions apply*All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact .Applicants have rights under Federal Employment Laws:Equal Employment Opportunity is the LawEEO is the Law SupplementPay Transparency PolicyFamily and Medical Leave Act (FMLA)Employee Polygraph Protection ActE-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program:E-Verify Notice (bilingual)Right to Work Notice (English) / (Spanish)

Description Leidos is seeking candidates for aGeospatial Analyst Journeymanto support our St. Louis, MO customer.A*Active TS/SCI with Poly is required to be considered. An ACTIVE TS/SCI will require a polygraph prior to starting the position.As a Geospatial Analyst, you will apply knowledge of ArcGIS while performing a range of geospatial analysis for an intelligence customer. The successful candidate will work as a member of a government-contractor team providing geospatial analysis and research in support of counterterrorism mission requirements. The candidate should have a strong geospatial background and the ability to independently conduct research and initiate projects as they deem appropriate.PRIMARY RESPONSIBILITIES:The candidate will work directly with customers and team members and must be able to create, edit, research, evaluate, analyze, and fuse data from multiple sources and datasets to produce current and finished geospatial intelligence maps and other related products. You will prepare geospatial products and present intelligence assessments to customers and advise key leadership of intelligence issues and challenges as appropriate. You will exercise oral and written communication skills to collaborate and interact with analysts within the customer agency, military service components, and DoD and national-level intelligence agencies. In this position you will also assist in the development and documentation of analytical procedures, development and maintenance of geodatabases, and may be required to educate and demonstrate new methodologies and instruct on the use of advanced GIS applications.MINIMUM REQUIRED QUALIFICATIONS:Active TS/SCI level security clearance is REQUIREDBS and 2-4years of relevant experience or equivalent years of experience with geospatial analysis experienceKnowledge and experience with digital cartography, image processing, computer technology, geographical information systems, (GIS), geospatial production techniques, remote sensing, and photogrammetryKnowledge of and experience with most of the following: ArcGIS, ArcSDE, ArcView, ArcIMS, ArcTools, the Integrated Exploitation Capability (IEC) system, SocetSet, TerraExplorer/Builder, Remote View, ERDAS IMAGINE, MRSID, VB/VBA (or some other object oriented programming/scripting language), Oracle and other appropriate software to analyst geospatial dataCapability to read and understand intelligence issues , military affairs, and use GIS to develop Geospatial Intelligence reports and products to solve problemsADDITIONAL DESIRED QUALIFICATIONS:Bachelors Degree PreferredThe successful candidate must be a self-starter and capable of working independently with minimal or no supervision and guidanceCandidate must be able to multitask and deliver quality products within specified timelines. Candidate should work well as part of a team effort"External Referral Eligible"MACSSOriginal Posting Date:2024-09-19While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Maintenance Mechanic Career Opportunity Acknowledged for your proficiency as a Maintenance MechanicAre you a skilled Maintenance Mechanic seeking a career that combines your technical expertise with a sense of purpose Look no further! Encompass Health is looking for skilled Maintenance Mechanics seeking purposeful careers. Join us as a crucial member ensuring facility reliability and functionality, contributing to a workplace close to home and heart. Be the driving force behind maintenance, ensuring a secure environment for patients, visitors, and staff. Your role spans executing preventative maintenance, repairs, and tasks across hospital systems, including equipment, utilities, plumbing, electrical, HVAC, as well as light construction, painting, groundskeeping, security, and floor care. Ready to make a meaningful impact while leveraging your craft Explore this opportunity with us and help keep our operations running smoothly. A Glimpse into Our WorldAt Encompass Health, you'll experience the difference the moment you become a part of our team. Working with us means aligning with a rapidly growing national inpatient rehabilitation leader. We take pride in the growth opportunities we offer and how our team unites for the greater good of our patients. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing. Starting Perks and BenefitsAt Encompass Health, we are committed to creating a supportive, inclusive, and caring environment where you can thrive. From day one, you will have access to:Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.Generous paid time off that accrues over time.Opportunities for tuition reimbursement and continuous education.Company-matching 401(k) and employee stock purchase plans.Flexible spending and health savings accounts.A vibrant community of individuals passionate about the work they do! Become the Maintenance Mechanic you always wanted to beSafely and effectively test and operate emergency power supply system (EPSS) and its components.nstall/maintain/repair mechanical, electrical, HVAC, pneumatic, oxygen, and telephone systems.Work independently in the specified time frame as assigned per job task under the direction of the supervisor.Retain auto, carpentry, phone, pneumatics, stationary engineer, hydraulics, and computer skills.Plan, interpret, examine, draw, and record work; report daily completion to supervisor.Perform all types of control maintenance, building construction and repair, and equipment overhaul within required time frame.Maintain a working knowledge of all facility systems and all applicable regulatory standards. QualificationsLicensing in a specialty field such as electrical, plumbing, or HVAC is preferred.Valid driver's license may be required.High school diploma or equivalent work experience preferred.Previous experience in preventative maintenance, equipment repair, HVAC, plumbing, electrical, and/or construction required. Healthcare experience is a plus.May be required to work weekdays and/or weekends, evenings and/or night shifts if needed.Ability to lift, lower, push, pull, and retrieve objects weighing a minimum of 50 pounds.Must demonstrate the ability to tolerate frequent position changes such as twisting, stooping, reaching, squatting, kneeling, pushing/pulling, and bending positions for complete shift.Ability to work on ladders and scaffolds and be able to sit, stand, and walk for momentary to extended periods of time.Ability to safely work with hazardous materials. The Encompass Health WayWe proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing!At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.We're eagerly looking forward to meeting you, and we genuinely mean that. Join us on this remarkable journey!

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Candidate will possess personal knowledge and skills to perform preventative maintenance on UPS Transportation Trailers and Converter Dollies. Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems. Candidate must be willing to work 2nd or 3rd shift. Schedules include Monday through Friday and Sunday through Thursday and Tuesday through Saturday.***Advancement opportunity by seniority to Power Position with higher pay***Ideal candidate will possess the following:Current documented trailer mechanic experienceExperience using diagnostic equipment, scan tools and personal computerPossess a full complement of personal hand toolsJob ResponsibilitiesMeet D.O.T requirementsBend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workdayReport to work on a regular and timely basis and complete the scheduled workday on a consistent basisAbility to work varying shifts, additional hours and/or overtime depending on service needsSitting required infrequently throughout the duration of the workdayLift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 poundsAssist in moving packages or equipment up to 150 poundsSimple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasksCDL A - Preferred Operate standard/manual transmissionRequired to wear personal protective equipmentWork in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weatherWork cooperatively in a diverse work environmentHave a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $29.15 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.

***This role is eligible for a sign-on bonus!***Avionics Installer Srin GAC St. LouisUnique Skills:Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems.Education and Experience RequirementsHigh School Diploma or GED Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field. Ability to read and interpret blueprints and schematic diagrams. Position Purpose:Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways . Assists Engineering in resolving problems and makes repairs per engineering direction. Maintains required. logs and records. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection.Additional Functions: Properly care for and maintain shop equipment and tools as assigned by Supervisor. . Coordinate shift changes in team leaders absence. . Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) . Assists and fills in for team coordinator as required. .Perform other duties as assigned.Other Requirements: Possess a working knowledge of the Gulfstream Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule. Strong written and verbal skills required. Computer keyboard skills necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221377Posting Type: Internal-ExternalDepartment: J2302-STL Compl Advanced TCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N9Number of Openings: 2Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

The Maintenance Technician II supports the FedEx Industrial Maintenance for material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues.ESSENTIAL FUNCTIONSProvides preventative and predictive maintenance and repair of material handling systems through demonstrated competency of two or more specialty skills of mechanical power transmission and/or electrical and/or PLC/controls with basic welding/fabrication skills.Ability to troubleshoot, diagnose and repair mechanical and electrical problems and failures within the material handling system but rely on higher level technicians and/or management to make final decisions on more complex issues.Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns.Responds to sort calls to diagnose problems and make repairsMay troubleshoot multiple component issuesAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data.Somewhat complex skills required in diagnosing and troubleshooting mechanical failuresMay rely on higher level Technicians to assist in more complex troubleshooting and issuesMay be involved in smaller scope projectsMay be required to work a flexible schedule including all days and shifts as the business need dictatesPerforms other duties as assignedExamples of what you may learn while in the Tech II level (does not include all areas/responsibilities)MechanicalIdentify what component of a conveyor (bearing, pulley, etc.) has caused a conveyor belt to become tracked incorrectly and repair/replace it.Diagnose a power transmission failure by determining which component has failed, such as motor failure, gearbox failure, or possible locked up pulley or rollerAbility to read and interpret mechanical drawings and manualsElectricalAbility to use a digital multimeter on AC/DC voltage, continuity, and resistance settings to find failed components and shorted wires.Ability to test a relay or contactor to determine which contacts are bad, not just that the component itself has failed.Ability to read and interpret electrical drawings/schematics and manualsPerforms other duties as assignedPLC/ControlsOpen PLC programs offlineTroubleshoot electrical controls issues utilizing the I/O lights on a PLCWelding or FabricationMIG and stick weld in multiple positions (vertical, overhead, etc.)Weld new parts together using appropriate rods, wire, gas, etc.Fabricate basic parts such as a guard or bracketUse oxygen/acetylene torchMINIMUM EDUCATIONHigh School Diploma or GED requiredCertificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred.MINIMUM EXPERIENCETwo (2) years experience in Industrial Maintenance/Mechatronics with competency in at least two specialty skills in mechanical power transmission, electrical, or PLC/Controls, with basic welding/fabrication skills required.Related military experience will be considered.In lieu of experience, an associate degree in an Industrial Maintenance/electrical/mechanical trade or related certificates or other degrees may be considered equivalent.Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experienceKNOWLEDGE, SKILLS AND ABILITIESAbility to follow procedures as directed by work orders or high-level technicians/managementAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed dataAbility to solve basic mechanical or electrical problems, which may include understanding of basic engineering formulasAbility to diagnose mechanical power transmission and electrical issues by troubleshooting at multiple component levelEffective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needsAbility to follow detailed instructionsSoftware skills, including Microsoft Office suite and other web-based applicationsPossess time management and organizational skillsJOB CONDITIONSWill need to use hand tools and possibly power toolsMay be working in hot or cold temperaturesMay need to stand, walk, bend, stoop and squatPreferred Qualifications: Pay Transparency: Salary range $21.95 - $33.45 -pay is based on experience.Pay: Additional Details: $1,000 sign-on bonus *other restrictions apply*All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact .Applicants have rights under Federal Employment Laws:Equal Employment Opportunity is the LawEEO is the Law SupplementPay Transparency PolicyFamily and Medical Leave Act (FMLA)Employee Polygraph Protection ActE-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program:E-Verify Notice (bilingual)Right to Work Notice (English) / (Spanish)

Description The GIS / Cartographic Analyst - Journeyman will work within a government/contractor team environment providing Digital Nautical Chart and Electronic Nautical Chart Conversion, Production and Review as well as provide support to existing and developing mission areas. Future needs and capabilities, as well as developmental assignments, are included.Cartographic analyst duties includes, but is not limited to the following:Digital Nautical Chart and or Electronic Nautical Chart Conversion production by performing Cartographic and GIS analyst functionsExtracting features from a variety of sources including but not necessarily limited to rasterized nautical charts, digital hydrographic survey data and ortho-rectified imageryUpdating source and source catalogs and informationData Conversion/migrationScript writing / generation to improve efficiency of the production processMinimum Required Qualifications:Requires HS and 3+ years of prior relevant experienceExperience in geography, cartography and Geographic Information Systems (GIS) which includes skill in ArcGIS applicationsExperience in creating shapefiles, geo-databases, and featuresKnowledge of digital cartography, image processing, geographical information systems (GIS), geospatial production techniques and NGA digital data formatsAbility to analyze imagery and non-imagery source information for application to NGA hydrographic products and databasesPreferred Qualifications: BA degree and 2 – 4 years of prior relevant experience or Masters with less than 2 years of prior relevant experience.Security Clearance RequirementMust have an active TS/SCI clearance required, with willingness to obtain a polygraph upon request"Eligible External Referral"MACSSOriginal Posting Date:2024-09-06While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Aircraft Component Technician (Painter)inGAC St. LouisUnique Skills:Ideal candidate would have experience in interpreting paint diagrams, prepping for paint, and painting. This position will consist of prepping/painting aircraft components to include, but not limited to: landing gear, wheels, brakes and winglets. Knowledge of applicable EPA requirements/regulations for painting highly preferred.Education and Experience RequirementsHigh School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose:Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Maintain and utilize all required. paperwork in accordance with FAA RS requirements. Maintain a clean and orderly work area. Comply with all company and legislative environmental health and safety regulations.Additional Functions: Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . Assist with training and instructing of Acft Component Repair I Techs. . Resolves routine questions and problems, referring the more complex issues to higher levels. .Perform other duties as assigned.Additional InformationRequisition Number: 222457Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/23/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

The Maintenance Technician III supports the FedEx industrial maintenance of material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues.ESSENTIAL FUNCTIONSUnder minimal supervision, provides preventative and predictive maintenance, troubleshooting and repair of material handling systems through demonstrated proficiency in mechanical power transmission and electrical with working knowledge of PLC/controls and welding/fabricationAdheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concernsWill interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalationResponds to sort calls to diagnose problems and make repairsAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed dataComplex skills required in diagnosing and troubleshooting mechanical, electrical and/or PLC/controls failuresMay rely on higher level Technicians in complex control systems issuesMay begin to read PLC and have the ability to burn EEPROMsMay begin to assist lower level techniciansMay begin to develop scopes of work and project plans for small scale projects to be executed at a local levelMay be required to work a flexible schedule including all days and shifts as the business need dictates.Performs other duties as assignedExamples of what you can expect to learn in the Tech III level (does not include all areas/responsibilities). MechanicalUnderstand power transmission concepts, such as gear ratios, service factor, horsepower and frame size to repair/replace a failed gearbox and/or motor when the correct replacement parts are not availableUnderstand mechanical design concepts to be able to replace failed pulleys and bearings with replacements that don’t match design without impacting performance of a conveyor (speed, torque, etc.)Can read, interpret and create or modify mechanical drawingsElectricalUse a digital multimeter to resistance test de-energized circuits.Troubleshoot and diagnose both the power and the control branch of motor controls circuits.Read, interpret and create or modify electrical drawings/schematics PLC/ControlsGo online with PLC processors to aid in troubleshootingBurn EEPROMsUnderstand PLC networks, such as ControlNet, DeviceNet, etc.Welding or FabricationMIG, stick and TIG weld in all positions.Understand difference between structural and non-structural welds and when to apply themRepair broken components where factors such as position or load may impact the repair, such as motor mounting plates or conveyor legs.Use vertical mill/drill and other machining toolsMINIMUM EDUCATIONHigh School Diploma or GED requiredCertificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred.MINIMUM EXPERIENCEFour (4) years experience in Industrial Maintenance with proficiency in knowledge and demonstrated skills in mechanical power transmission, electrical and working knowledge of PLC/Controls and welding/fabrication skills through job experience, related military experience and/or related education required.Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experienceKNOWLEDGE, SKILLS AND ABILITIESAbility to follow procedures as directed by work orders or high-level technicians/managementAbility to interpret electrical or mechanical schematics, manufacturer’s manuals and engineering specifications to troubleshoot, diagnose and repair system faults and failures or determine escalationAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed dataAbility to solve mechanical or electrical problems, which may include understanding of engineering formulasAbility to diagnose mechanical power transmission, electrical or PLC/controls issues by troubleshooting at multiple component and system levelEffective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needsNeed to collaborate successfully with department, operations, vendors and support teams that failures or projects may requireSoftware skills, including Microsoft Office suite and other web-based applicationsPossess time management and organizational skillsJOB CONDITIONSWill need to use hand tools and possibly power toolsMay be working in hot or cold temperaturesMay need to stand, walk, bend, stoop and squatPreferred Qualifications: Pay Transparency: $24.15 - 36.75 - pay is based on experiencePay: Additional Details: $1,000 sign-on bonus *other restrictions apply*All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact .Applicants have rights under Federal Employment Laws:Equal Employment Opportunity is the LawEEO is the Law SupplementPay Transparency PolicyFamily and Medical Leave Act (FMLA)Employee Polygraph Protection ActE-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program:E-Verify Notice (bilingual)Right to Work Notice (English) / (Spanish)

Aircraft Technician Sr A&Pin GAC St. LouisUnique Skills:Candidates must be able to work any shift, as assigned by their Manager.Gulfstream experience highly desired.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222399Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 09/27/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

The Maintenance Technician II supports the FedEx Industrial Maintenance for material handling to complete preventative and predictive maintenance and repair of material handling systems. Will utilize prescribed processes as they relate to mechanical power transmission, electrical, PLC/controls, welding/fabrication and other industrial maintenance related systems. May troubleshoot component and systems issues.ESSENTIAL FUNCTIONSProvides preventative and predictive maintenance and repair of material handling systems through demonstrated competency of two or more specialty skills of mechanical power transmission and/or electrical and/or PLC/controls with basic welding/fabrication skills.Ability to troubleshoot, diagnose and repair mechanical and electrical problems and failures within the material handling system but rely on higher level technicians and/or management to make final decisions on more complex issues.Adheres to all applicable safety standards and promotes a safe work environment by attending safety meetings and required trainings and addressing all safety concerns.Responds to sort calls to diagnose problems and make repairsMay troubleshoot multiple component issuesAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed data.Somewhat complex skills required in diagnosing and troubleshooting mechanical failuresMay rely on higher level Technicians to assist in more complex troubleshooting and issuesMay be involved in smaller scope projectsMay be required to work a flexible schedule including all days and shifts as the business need dictatesPerforms other duties as assignedExamples of what you may learn while in the Tech II level (does not include all areas/responsibilities)MechanicalIdentify what component of a conveyor (bearing, pulley, etc.) has caused a conveyor belt to become tracked incorrectly and repair/replace it.Diagnose a power transmission failure by determining which component has failed, such as motor failure, gearbox failure, or possible locked up pulley or rollerAbility to read and interpret mechanical drawings and manualsElectricalAbility to use a digital multimeter on AC/DC voltage, continuity, and resistance settings to find failed components and shorted wires.Ability to test a relay or contactor to determine which contacts are bad, not just that the component itself has failed.Ability to read and interpret electrical drawings/schematics and manualsPerforms other duties as assignedPLC/ControlsOpen PLC programs offlineTroubleshoot electrical controls issues utilizing the I/O lights on a PLCWelding or FabricationMIG and stick weld in multiple positions (vertical, overhead, etc.)Weld new parts together using appropriate rods, wire, gas, etc.Fabricate basic parts such as a guard or bracketUse oxygen/acetylene torchMINIMUM EDUCATIONHigh School Diploma or GED requiredCertificates in Industrial Maintenance/Mechatronics, electrical or mechanical trade or related area and an associate degree in a related area preferred.MINIMUM EXPERIENCETwo (2) years experience in Industrial Maintenance/Mechatronics with competency in at least two specialty skills in mechanical power transmission, electrical, or PLC/Controls, with basic welding/fabrication skills required.Related military experience will be considered.In lieu of experience, an associate degree in an Industrial Maintenance/electrical/mechanical trade or related certificates or other degrees may be considered equivalent.Multiple certificates and degrees may be assessed by manager and HR to determine relevancy to minimum qualifications and experienceKNOWLEDGE, SKILLS AND ABILITIESAbility to follow procedures as directed by work orders or high-level technicians/managementAbility to utilize the Enterprise Asset Management (EAM) software to enter and retrieve prescribed dataAbility to solve basic mechanical or electrical problems, which may include understanding of basic engineering formulasAbility to diagnose mechanical power transmission and electrical issues by troubleshooting at multiple component levelEffective verbal and written communication within own department to peers, managers, and outside vendors to convey technical data and needsAbility to follow detailed instructionsSoftware skills, including Microsoft Office suite and other web-based applicationsPossess time management and organizational skillsJOB CONDITIONSWill need to use hand tools and possibly power toolsMay be working in hot or cold temperaturesMay need to stand, walk, bend, stoop and squatPreferred Qualifications: Pay Transparency: Salary range $21.95 - $33.45 -pay is based on experience.Pay: Additional Details: $1,000 sign-on bonus *other restrictions apply*All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact .Applicants have rights under Federal Employment Laws:Equal Employment Opportunity is the LawEEO is the Law SupplementPay Transparency PolicyFamily and Medical Leave Act (FMLA)Employee Polygraph Protection ActE-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program:E-Verify Notice (bilingual)Right to Work Notice (English) / (Spanish)

Interior Installer Technician Srin GAC St. LouisUnique Skills:***Multiple shifts available****Upholstery experience preferred.* Strong mechanical aptitude and experience working with aircraft interiors. General computer competency and ability to read and interpret engineering data desired.Education and Experience RequirementsHigh School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional InformationRequisition Number: 222392Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 09/27/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

***This role is eligible for a sign-on bonus!***Interior Installation Technician Srin GAC St. LouisUnique Skills:Aviation experience preferredEducation and Experience RequirementsHigh School Diploma or GED required. 4 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician Senior works under limited supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Interior Installation Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft interior removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). . Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Mentor and train other Interior Installation Technicians. Review their work prior to sign off to ensure work complies with quality control standards. Accept lead responsibilities as required. Oversee projects or other technicians and assess requirements of assigned tasks to procure required. materials and documentation for assigned tasks. Utilize the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians with aircraft maintenance requirements. Adapt to sudden schedule changes and coordinate projects with other shops/departments as required.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Advanced knowledge of aircraft installation and/or fabrication processes applicable to the specific position, such as removal and installation of galleys, closets, lavatories, side ledges, bulkheads, doors, panels; working with composite panels made from Nomex honeycomb, fiberglass, Lexan, acrylic materials, etc. Must be able to read, write, speak, and understand the English language. Must be fluent in English. Additional InformationRequisition Number: 221813Posting Type: Internal-ExternalDepartment: J2303-STL Compl BuildCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N9Number of Openings: 3Posting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Aircraft Technician Sr A&Pin GAC St. LouisUnique Skills:Gulfstream experience preferredEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221821Posting Type: Internal-ExternalDepartment: J2303-STL Compl BuildCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Interior Installation Technician IIin GAC St. LouisUnique Skills:Aviation experience requiredEducation and Experience RequirementsHigh School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221811Posting Type: Internal-ExternalDepartment: J2303-STL Compl BuildCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N7Number of Openings: 3Posting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Avionics/Electrical Technician Iin GAC St. LouisUnique Skills:Aviation experience preferredEducation and Experience RequirementsHigh School Diploma or GED required. 2 years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams. . Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Additional InformationRequisition Number: 221814Posting Type: Internal-ExternalDepartment: J2303-STL Compl BuildCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N7Number of Openings: 3Posting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Avionics/Electrical Technician Srin GAC St. LouisUnique Skills:Aviation experience requiredEducation and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221816Posting Type: Internal-ExternalDepartment: J2303-STL Compl BuildCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 3Posting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Avionics/Electrical Technician IIin GAC St. LouisUnique Skills:Aviation experience requiredEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221815Posting Type: Internal-ExternalDepartment: J2303-STL Compl BuildCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N9Number of Openings: 3Posting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Interior Installation Technician Iin GAC St. LouisUnique Skills:Aviation experience preferredCommon knowledge of basic handtoolsEducation and Experience RequirementsHigh School Diploma or GED required. Applicable installation, fabrication or related experience or trade school preferred. . Position Purpose:The Interior Installation Technician I works under close supervision to remove and install and/or fabricate aircraft interiors by using company operating procedures and quality standards.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (galleys, closet, lavatories, side ledges, bulkheads, doors and vanity ledge fill panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. Specific fit and installation tasks are to be completed in compliance with work order instructions and specifications. Use the material tracking system to create parts demand, track squawks and to sign off paperwork. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to work any shift. Able to climb ladders and stairs, work in small restricted areas, and lift up to 40 pounds. Must be computer literate. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221810Posting Type: Internal-ExternalDepartment: J2303-STL Compl BuildCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N6Number of Openings: 3Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Airworthiness Inspector A&Pin GAC St. LouisUnique Skills:Strong written and verbal communication skills. Must be able to prioritize tasks.Strong computer skills. .Must be able to work all shifts.Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs.Must be able to read, write, speak, and understand the English language.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221727Posting Type: Internal-ExternalDepartment: J2297-STL Completions QCCategory: Quality AssurancePercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Aircraft Technician Sr A&Pin GAC St. LouisUnique Skills:Must be able to wear fall restraint and must be able to work from a scissor lift.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221313Posting Type: Internal-ExternalDepartment: J2293-Compl PaintCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Aircraft Technician Sr A&Pin GAC St. LouisUnique Skills:Must be able to wear fall restraint and must be able to work from a scissor lift.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221313Posting Type: Internal-ExternalDepartment: J2293-Compl PaintCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Aircraft Technician IIin GAC St. LouisUnique Skills:Must be able to wear fall restraint and must be able to work from a scissor lift.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221312Posting Type: Internal-ExternalDepartment: J2293-Compl PaintCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N9Number of Openings: 1Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Upholstery Technician Srin GAC St. LouisUnique Skills:.Education and Experience RequirementsHigh School Diploma or GED required. 4 years experience in upholstery to include two (2) years aircraft upholstery experience or 6 years commercial upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Position Purpose:Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Fabricate and install seat covers, curtains and various assemblies and subassemblies. Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. Work with design/drawings to cut and install advanced custom design carpets with unique patterns.Additional Functions: Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. . Conduct safety audits and assists team members in doing safety audits. . Assist in maintaining shop equipment and associated JSAs. . Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). . Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required. levels of safety, quality and productivity. . Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. .Perform other duties as assigned.Other Requirements: Possess a working knowledge of Gulfstream inspection and process specifications and terminology. The ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221221Posting Type: Internal-ExternalDepartment: J2294-Comp UpholsteryCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N9Number of Openings: 1Posting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Aircraft Painter IIin GAC St. LouisUnique Skills:Must be able to wear fall restraint and must be able to work from scissor lift.Education and Experience RequirementsHigh School Diploma or GED required. 2 years in related paint processes. Aircraft industry experience preferred.. Valid Drivers License required.. Position Purpose:The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist with aircraft movement in hangars. Offer continuous improvement ideas/participate in continuous improvement activities.Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with the aircraft painting process. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221308Posting Type: Internal-ExternalDepartment: J2293-Compl PaintCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N8Number of Openings: 7Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Aircraft Painter Srin GAC St. LouisUnique Skills:Must be able to wear fall restraint and must be able to work from a scissor lift.Education and Experience RequirementsHigh School Diploma or GED required. 4 years related paint processes. Aircraft industry experience preferred.. Valid Drivers License required. Advanced knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary. Position Purpose:The Senior Aircraft Painter works independently to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures. Act on behalf of the Lead in their absence and provide assistance and work direction to other painters.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Assist supervision with assignment and accomplishment of work for assigned team members. Promote high standards of quality through instruction and by setting a good example for other painters to follow. Act on behalf of supervision as required. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist with aircraft movement in hangars.Additional Functions: Comply with Paint shop standard practices (SPT) process and WFR processes. . Mentor other members of Paint operations as required. . Offer continuous improvement ideas/participate in continuous improvement activities. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Thorough and complete understanding of the GAMPS, paint operations SPT manual and paint WFR. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221307Posting Type: Internal-ExternalDepartment: J2293-Compl PaintCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N9Number of Openings: 2Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Aircraft Painter Iin GAC St. LouisUnique Skills:Must be able to wear fall restraint and must be able to work from a scissor lift.Education and Experience RequirementsHigh School Diploma or GED required. 1 year of painting experience. Position Purpose:The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Mask, sand, and prepare aircraft for paint application. Apply glazing and sealing compounds in preparation for final painting. Operate and maintain all types of preparation and priming equipment. Mix paints and primers. . Perform leading edge sealant work in final detail. . Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure aircraft interior is protected (PTP).Additional Functions: Properly care for and maintain shop equipment and tools as assigned. . Comply with Paint shop standard practices. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Ability to use tools, equipment, and materials in the aircraft painting process. Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift. Must be computer literate. A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221309Posting Type: Internal-ExternalDepartment: J2293-Compl PaintCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N7Number of Openings: 7Posting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

RS Acft Tech IIin GAC St. LouisUnique Skills:Preferred: Experience working at Gulfstream in the SkillBridge Program as an RS Acft Tech II, working in St. Lous Mo. is highly desired.Preferred: Completion of at least 70 days as a SkillBridgeRS Acft Tech IIis highly desired.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222494Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/22/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Interior Installer Technician Iin GAC St. LouisUnique Skills:***Multiple Shifts available***Experience with hand tools and competency with computers preferred.Education and Experience RequirementsHigh School Diploma or GED required. Applicable installation, fabrication or related experience or trade school preferred. . Position Purpose:The Interior Installation Technician I works under close supervision to remove and install and/or fabricate aircraft interiors by using company operating procedures and quality standards.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (galleys, closet, lavatories, side ledges, bulkheads, doors and vanity ledge fill panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. Specific fit and installation tasks are to be completed in compliance with work order instructions and specifications. Use the material tracking system to create parts demand, track squawks and to sign off paperwork. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to work any shift. Able to climb ladders and stairs, work in small restricted areas, and lift up to 40 pounds. Must be computer literate. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222391Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 09/27/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

RS Sheetmetal Technician IIin GAC St. LouisUnique Skills:Must have structural sheet metal experience and have the ability to perform repairs using manufacturer's engineering drawings. Must be willing to work in confined spaces, on ladders, maintenace stands, highlift utilizing a harness.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience of sheetmetal and/or fabrication experience. Valid Driver’s License required. Position Purpose:The Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform sheet-metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). Assist in monthly 5S audits. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist in developing initiatives to meet individual OGSM requirements, as required.Additional Functions: Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.). . Properly use and maintain company-provided tools and equipment and returns items to tool room after use. . Ensure standard operating procedures are followed when operating ground support equipment. . Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Ensure accurate daily job charging to the aircraft. . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. . Assist in maintaining shop equipment and associated JSAs. .Perform other duties as assigned.Other Requirements: A working knowledge of sheet-metal installation and fabrication processes (measuring, cutting, bending, forming, and drilling of aluminum sheet stock, angle and honeycomb) is required. Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with sheetmetal installation and fabrication work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with Microsoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222384Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 09/22/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft