Mechanic Full-time Location: Waukesha, WI Compensation: Up to $70,000 annually based on experience Now hiring diesel mechanics to work on our fleet of buses! Coach USA is currently hiring full-time diesel mechanics to work at our Waukesha, WI Location! Coach USA has a new and exciting career opportunity for an experienced diesel mechanic at our Waukesha location. We are looking for an experienced mechanic to repair and inspect company equipment in a cost effective, safe, and timely manner.What We Offer: Competitive wage based upon experience and certifications.Full-time.Paid holidays, vacation and PTO.Full benefits package (medical, dental, vision, short term disability, life insurance, 401K).Tool and boot allowance.Uniform provided. Responsibilities: Perform basic, routine, and preventative maintenance bus repairs.Diagnose mechanical, electrical, and other breakdowns or failures.Repair or replace malfunctioning components, parts, and other mechanical or electrical equipment.Removal, installation, disassembly, and reconditioning of components of diesel engines.Interprets diagnostic test results accurately.Writes detailed inspection reports and repair plans.Collaborates with other diesel mechanics in all operational repairs.Demonstrate skills in advanced testing of all vehicle systems.Participate in maintenance training programs required for job and career development.Completes test drives to make sure all repaired vehicles run correctly and safely.Uses power, machine, and hand tools safely in a maintenance environment.Follow all safety rules and regulations in the performance of work assignments. Qualifications: High School Diploma or GED preferred.Be able to work in all types of weather conditions, including outdoors.Must pass a pre-employment drug screen, physical and criminal background check.Familiarity with safety management.Possess your own set of tools to perform maintenance tasks.Must have a valid Class B Commercial Driver’s License (CDL), or the ability to obtain one.Ability to work weekends and holidays.Basic computer skills.Ability to communicate effectively in English.Experience in the transportation industry.Experience in the Motor Coach Industry.Associate degree in diesel technology preferred.Computer diagnostic skills a plus, but training is provided. Coach USA, INC. would love to discuss your qualifications for this position. To learn more about your next big career change! APPLY NOW! Coach USA is an Equal Employment Opportunity employer. In compliance with Federal and State equal employment opportunity laws, qualified applicants are considered for all positions without regard to race, color, religion, national origin, sex (including gender identity, sexual orientation, and pregnancy), age, genetic information, disability, veteran status, or other protected class.©"lube", "mechanically inclined", "mechanic", "Mechanic apprentice", "diesel technician", "auto mechanic", technical", "entry level mechanic"©

Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Fabricator II Essential Functions: Select dies, tools, punches for proper thickness of materialSelect proper CNC program for laser cutting.Form material according to drawings using various radius diesInstall and align progressive compound, forming, blanking, piercing, coining, embossing, notching and combination punches and diesMonitor the condition of equipment and toolingPerform preventative maintenance proceduresPerform first piece and in progress inspection to ensure that work meets all requirementsAdjust stroke, feed equipment, knock out devices, work holders and safety devicesInstall and align punches and dies in proper tool station to perform required operationsMonitor condition of tooling and inform supervisor or team lead when punches and dies need sharpeningMaintain safe and clean working environment by complying with procedures, rules, and regulationsConserve resources by using equipment and supplies as needed to accomplish job resultsContribute to team effort by training others in performance of fabrication tasks as neededInspect all work prior to passing it on to the next operationDocument actions by completing production and quality forms Required Knowledge, Skills and Abilities: Must be able to safely use small hand and power toolsMust be able to read bills of materials and interpret drawings of moderate to advanced complexity.Must have basic computer skillsMust be able to safely operate fabrication machinery such as press brake, punch press, etc Education/Experience: High School diploma, GED or combination of work experience and skill development required3 or more of experience working as a metal fabricator in a manufacturing environment desirablePhysical Demands: (The work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles) Frequencies: Occasional (1-33%); Frequent (34-66%); Continuous (67-100%) Lifting Demands Lift up to 75 lbs on an occasional basis floor to waistLift up to 50 lbs on a frequent basis floor to chestCarry up to 75 lbs on an occasional basis up to 25 feetPush/pull up to 100 lbs on an occasional basis Postural Demands Standing - continuousWalking - continuousBending/stooping - continuousSquatting/kneeling - continuousLifting - continuous Miscellaneous Demands Griping, manipulation, fingering - frequent to continuousVariable hand/power tool use - frequentTwo-person lifting tasks using assistive devices for lifting, pulling and pushing including hand trucks, pallet jacks, forklifts and hoistsCustomer Satisfaction/Safety/Quality/Environmental: Our goal is to provide a world-class service to our customers by delivering defect-free products on time to both our internal and external customers Your comments and suggestions are an integral part of our successResponsible for ensuring that quality systems function effectively and products meet customer requirements Responsible for following safety and environmental rules and regulationsResponsible for ownership of his/her own safety and that of their coworkersResponsible for maintaining a safe and healthy work environment Making certain potential hazards are identified and corrected in a timely mannerResponsible and empowered to make the decisions and take the necessary actions that are required to fulfill the quality policyResponsible for the quality of his/her workConform to G&W's Environmental Management System (EMS) and comply with applicable regulatory requirementsContribute to continual improvement of activities, products and services that will help prevent pollution, reduce waste and protect our environmentWhy join us G&W enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world!G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires.*G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Disassemble, Clean, and Inspect (DCI) Technician is responsible for the methodical teardown and documentation of rotating equipment that has been received at the repair shop for repair. This critical role will work on a diverse range of rotating equipment including multistage centrifugal pumps, between bearing and overhung pump, vertical pumps, small compressors, Decoking equipment, and other high energy pumps. The DCI Technician will receive a technical package that includes drawings and other equipment specifications to record disassembly and technical findings. Site engineers will use this data to determine the repair scope for the equipment. The DCI Technician must be very detail oriented and experienced in various failure modes like galling, bearing failure, excessive heat sign, and locate failed components to assist the engineering department to determine an appropriate repair path for the equipment. 1st Shift: 6:00am - 2:30pm 2nd Shift: 2:30pm – 11pm 10% Shift Differential for 2nd Shift Responsibilities Include: Work safely while helping colleagues work safely and utilizing Stop Work Authority when appropriate.Follow pre-job brief and checklists prior to machining a partFollow all routers and assembly procedures needed to accurately Disassemble clean and inspect the received equipmentAccurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gaugesClean each part to be used and document the condition of componentsInspecting components/assemblies accurately and precisely, and clearly record the results of these inspections. This includes fits, clearances, TIR, and other no destructive testing PMI and Liquid penetrant inspections.Taking pictures to document condition and process.Communicating clearly and professionally with production planners and customers to discuss the component and pump conditionsCoordinate and interface with operations engineers as necessaryAccurately use precision measuring and inspection tools to measure dimensions of pump components and assemblies. (Dial Indicators, calipers, inside/outside micrometers, etc...)Able to complete all related documentation associated with Disassembly processUtilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly processCommunicate clearly to peers and supervisors any related job issuesAbility to work efficiently within fixed time windows for each manufacturing processWillingness to work with local team on developing new tools and hardware as part of on-going Continuous Improvement projects within the facilityExhibit behavior that encourages teambuilding, decision making, problem solving, and continuous improvementsUtilize cranes, lifting devices, and fork trucksComply with all Flowserve policies and procedures, specifically around time and attendance, safety, and productivity Requirements: High school diploma or equivalentGeneral mechanic skills. Turning a wrench and using ratchets as examplesMust own or be willing to quickly procure set of personal SAE hand tools and measurement instruments (micrometers, dial indicators, calipers, etc.) and a roll-around toolboxAble to read and interpret prints, shop drawings, assembly checklists, and other written work instructions preferredBasic computer aptitude to learn data entry systems as well as Microsoft Word and OutlookProficient verbal and written communication skills in English and able to effectively understand work instructions, safety procedures, and company policies.Must be able to effectively communicate job status and support handovers from shift to shiftMust be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts.With training be comfortable with crane operation, rigging, lifting and moving items up to 10 tons in weight.Experience working in a cross-functional, diverse, and responsive teamDemonstrated attention to detail and processesExcellent organizational skillsMust show a customer-service mindset for on-time delivery and quality workmanshipAbility to work independently, problem solve, and prioritize work assignments with support from Team Lead and SupervisorMust be able and willing to work overtime hours including weekends and holidays when dictated by customer emergencies and business needsAbility to prioritize and manage multiple tasks in a fast-paced and changing work environmentStrong drive to make things happen and a strong “can do” attitudeDemonstrate a desire for personal growth and career development Preferred Skills / Experience: 1+ years of general mechanical experienceCertification of Trade school training may be accepted in lieu of experienceKnowledge of service environment activities including DCI, machining, assembly, test, and field service for rotating equipment.Previous manufacturing experiencePrior experience working the fast-paced and unpredictable environment around repair services. Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-11621 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Come fly with Regal Rexnord and watch your career soar! We provide excellent opportunities to grow your career and earnings from there. Couple that with a very competitive benefit package; a climate controlled/modern/state of the art building; and a winning culture built on the Regal Rexnord Values, and you have an opportunity to navigate a great career.Regal Rexnord’s Aerospace and Defense business is on an upward trajectory, we are rapidly growing, and we have opportunities to add new team members. Are you interested in joining a growing team with a fantastic culture with great pay, outstanding benefits that start on day one, and a$4,000 sign-on bonus Do you want a career, not just a job Are you mechanically oriented and like to work with machinery and tools If this is you, then apply to this role to learn more about how you and Regal Rexnord’s Aerospace and Defense Division can launch your career.Job DescriptionSet up, adjust, and operate CNC or manual grinders to perform a series of grinding operations such as O/D, I/D, boring, and facing on components used for the manufacture of precision mechanical components. Follow quality and safety rules and keep work area in a clean and orderly condition.Key AccountabilitiesWork from blueprints, process sheets, tooling instructions, and standard charts to identify component/manufacturing specifications, enters data into ERP system.Efficiently set up, adjust and operate 2 different grinding machines within department (i.e. CNC, Manual, ID, OD, Centerless and Face).Verify conformance of machined work-pieces to specifications using gauges and related measuring devices, set up and verify preset gauges for proper calibration as required.Inspect own work for correct dimensions and ensure that company quality and quantity standards are maintained and complete required documentation. Will be required to inspect the work of other operators.Compute such data as dimensions, rotation speeds, feed rates, and machining times, may be required to operate multiple machines, use hand tools and manual machines as needed.Perform other related duties as assigned.Job Requirements“This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position”.·Minimum of 2 years experienceand demonstrated proficiency of machine set up and operating precision grinding machines.· Requires a high school education or equivalent experience.· Demonstrated ability to perform basic mathematical calculations.·Previous experience reading and interpreting blue prints and work instructions in English.· Moderate physical demand required to insert tooling, set up work centers, inspect work pieces and make machine adjustments, which is equivalent to continuously lifting or moving light weight material. Must be able to lift up to 50 lbs and stand for an entire shift.In addition to gaining invaluable experience and having the opportunity grow, you will be rewarded with:Competitive Hourly WageMatching 401(k) contributionMedical/Dental/Vision InsuranceShort-Term and Long-Term Disability InsuranceAccidental Death and Dismemberment InsuranceFlexible Spending Accounts (Medical and Dependent Care) & Health Savings AccountsCritical illness and Accident Insurance, as well as Life Insurance, and an EAPEducational ReimbursementBenefitsMedical, Dental, Vision and Prescription Drug CoverageSpending accounts (HSA, Health Care FSA and Dependent Care FSA)Paid Time Off and Holidays401k Retirement Plan with Matching Employer ContributionsLife and Accidental Death & Dismemberment (AD&D) InsurancePaid LeavesTuition AssistanceAbout Regal RexnordRegal Rexnord is a $6.5B publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools.The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.Equal Employment Opportunity StatementRegal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail .Equal Employment Opportunity PostersNotification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Mechanic performs general maintenance and repairs for assigned equipment and facilities including plumbing, electrical, basic carpentry, heating and cooling, and other building systems.Key Job Responsibilities Ensure consistent execution of WOW (Wow Operating Way) plan.Inspects and identifies equipment or machines in need of repair.Troubleshoots issues to determine necessary repairs.Plans repair work using buildings blueprints or equipment manual as needed.Performs general repairs that do not require a specialized technician. Examples may include repairing drywall, painting, and repairing doors and other building fixtures.Performs routine maintenance on building systems.Cleans and assists with upkeep of the facilities.Orders supplies and materials needed for repairs and maintenance.Performs other related duties as assigned.Education and/or Experience Required High school diploma or equivalent required.ASE American Service Excellence certification and prior training or could be a new graduate.Related experience preferred.On-the-job training offered.Required Skills/Abilities Ability to follow instructions from supervisors or senior maintenance workers.Knowledge of general carpentry and repair.Ability to use hand tools and power tools.Excellent organizational and time management skills.Other Requirements Prolonged periods standing and walking.Must be physically able to climb ladders, bend, or crawl into awkward spaces.Must be able to lift up to 50 pounds at a time.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Quality Inspector - 3rd Shift Whitewater, WI, 420 North Universal Blvd, Whitewater, Wisconsin, United States of AmericaReq #3778 Thursday, June 27, 2024 MacLean-Fogg is a globally recognized leader in the design and manufacture of innovative fastener solutions, engineered components, and advanced manufacturing systems for the automotive and industrial sectors. With a rich history dating back to 1925, we are a family-run company that takes pride in our heritage while embracing the future through continuous innovation and a commitment to sustainability. Our diverse product offerings and our commitment to quality and customer satisfaction have solidified our reputation as a trusted partner in the industry. As we continue to expand our global footprint, we remain dedicated to fostering a collaborative and inclusive work environment that empowers our employees to thrive and make a meaningful impact. Join us at MacLean-Fogg as we build on our legacy of excellence and shape the future of manufacturing. Join Our Team as a Quality Inspector (3rd Shift)!Are you ready to ensure top-notch quality in every step of the production process We’re looking for a meticulous Quality Inspector to join our dynamic team and play a crucial role in maintaining our high standards of excellence. This is your opportunity to make a significant impact in a fast-paced environment where your attention to detail and technical skills will shine!Job Summary: As a Quality Inspector on our 3rd shift, you’ll perform a variety of essential quality checks and tests on units, materials, or products. Your keen eye for detail and commitment to precision will ensure that all our products meet stringent quality and reliability standards.Job Duties:Conduct inspections of finished or in-process goods to verify compliance with work instructions, promptly addressing any deviations.Utilize a variety of precise gaging instruments with skill and accuracy.Complete first piece inspections when necessary to confirm quality control requirements.Maintain meticulous records of statistical data and perform data entry tasks efficiently.Contribute to the development and updating of inspection procedures, protocols, and checklists.Analyze data and prepare clear summaries that highlight conformity or deviations from established standards.Conduct audits to uphold our rigorous quality benchmarks.Escalate any quality issues promptly to ensure swift resolution.Ensure all documentation is completed thoroughly and accurately.Uphold 5S standards by maintaining a clean and organized work area.Adhere strictly to Safety, Environmental, and Quality policies and procedures.Embrace additional responsibilities as assigned to support our team’s success.Experience and Education:You’ll operate under general supervision, handling moderate complexity with confidence and referring more intricate matters to higher-level staff.Possess a solid grasp of the subject matter, backed by 2 to 4 years of relevant experience.Competencies/ Skills:Ability to interpret and apply work instructions effectively.Strong aptitude for following both written and verbal directions precisely.Basic proficiency in verbal and written communication.Sound mathematical skills for accurate measurements and calculations.Comfort with basic computer operations.Technical expertise in using required gaging instruments proficiently.Impeccable attention to detail that ensures thoroughness in every task.Sharp problem-solving abilities to troubleshoot issues effectively.Analytical thinking skills to assess data and identify trends or anomalies.Why Join Us This role offers you the chance to work in a supportive team environment where your contributions are valued and recognized. You’ll have opportunities to grow your skills and advance your career while ensuring our products meet the highest standards of quality. If you’re passionate about precision and ready to take on this exciting challenge, we want to hear from you!Apply today and embark on a rewarding journey with us as a Quality Inspector. Together, let’s uphold excellence and drive success in our production operations! EOE-Minority/Female/Disability/VeteranVarious agencies of the United States Government require employers to maintain information on applicants pertaining to factors such as race, sex, and type of position for which an individual applies. The information requested is voluntary and for compliance with certain record keeping requirements. MacLean-Fogg Company has a long-standing commitment to equal employment opportunity for all its associates and applicants for employment. MacLean-Fogg Company believes all persons are entitled to equal employment opportunities and does not discriminate against its employees or applicants for employment because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Other details Job FamilyQualityPay TypeHourly

Overview: Tire Technician – Part-Time – Round Lake BeachDiscount Tire2125 N IL ROUTE 83ROUND LAKE BEACH, IL, 60073-4906OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $15$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

The Assistant Manager is a positive, high-energy, customer-focused position. You are provided with the opportunity to grow as an individual and team member in the tire and automotive industry. Job Details: What you'll do: Build customer relationshipsAssess customers' needs and provide Belle Tire solutions according to their needs Follow Belle Tire's Sales ProcessManage a cash drawer; cash customers out and maintain daily cash reconciliationDirect the workflow in the service departmentMeet and exceed defined goals and objectivesHandle day to day paperwork involved with retail operationsOpen and Close the store as a part of key holder dutiesAssist store manager with coaching, managing and developing employeesAssist in writing a store schedule for all employeesAssist in hiring, interviewing and employee relations concernsInventory managementFacility managementClean shop, showroom, restroomWork well in a team environment with a positive attitudDo the right thing for the customers, employees, and vendorContinuous thinking and sharing of ideas to improve Belle TireOther duties as assigned by manager Requirements: 18 years of ageValid drivers' license High School Diploma/GED is requiredAbility to communicate clearly and professionally with co-workers, management and customersAbility to lift an object weighing up to 75 poundsVarying work hours, Mon-Sat, some overtime may be required. Workshop environment, with heavy physical requirements and long periods of standing. Job Benefits: Company contributions to 401kProduct and service discountsFlexible paid time offCompetitive health insurance for eligible employeesOpportunities for career advancement with an outstanding family company About Us: Belle Tire was established over 100 years ago with the belief that customer satisfaction must always be the bottom line. As a family owned company with over 175 retail locations and over 3000 employees in Michigan, Indiana, Illinois and Ohio, we give our neighbors peace of mind and trust that we will get them back on the road fast and affordably. Belle Tire provides tire and automotive services including shocks and struts, oil changes, brakes, batteries, auto glass and more with an in-store experience that far exceeds a traditional garage. Belle Tire is an equal opportunity employer. At Belle Tire we are committed to treating all applicants and employees fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, religion, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law.

AutoReqId: 19588BR Pay Class: Hourly Hourly Pay Rate: 41.70 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Mobile Equipment Mechanic for our Thornton, Illinois facility located in 620 W 183rd. St Thornton, IL 60476 Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. What We Are Looking For Prefer high school diploma or general education degree (GED)Must have a minimum of one year of experience repairing heavy equipment or vocational trainingNYS Heavy Equipment Inspector’s License or ability to obtainMust be able to write legibly to complete work orders and other required paperworkMust be able to read and comprehend maintenance manualsMust have basic hand and air tools required to repair heavy duty trucks.1 to 4 years of experience required. WORK ENVIRONMENT Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75-100 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Be part of the future!We are one team, dedicated to working collaboratively to createthe purposefulsolutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, andwe’llgive you the space and opportunities to grow and succeed.We are committed tomakea difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAndMore!What you will do Service Technicians diagnose problems and perform service and repairs on card access, CCTV, burglar alarm systems, electronic fire alarm systems and other related building system products at customer sites. How you will do it Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment. Service, troubleshoot, and install card access, CCTV, and burglar alarm systems. Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics, and operational product manuals. Exhibit effective customer service skills by consistently communicating with staff and customers to ensure customer satisfaction. Complete Service Acknowledgements with proper coding through communication devices such as smart phones and laptop computers. Obtain customer signature upon completed service call assignment. Available for on-call emergency service. Perform other duties as assigned. What we look for Required 2-year degree or equivalent combination of education and experience. 4 years documented experience with card access and CCTV. Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices. Experience installing, inspecting, repairing, and programming card access and CCTV. Fire alarm experience is a plus. Experience in reading and interpreting blueprints, submittals, and operational/product manuals. Ability to follow verbal and written instructions. Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc. Ability to work flexible hours including weekends to meet customer requirements. Overnight travel may be required. Demonstrate a high level of customer service. Maintain truck inventory to ensure timely response to customer needs. Ability to adhere to, implement, and always follow safety guidelines and procedures. Strong organizational skills, positive attitude, and an ability to learn quickly. Possess a valid driver’s license and driving record that meets company requirements. Able to pass a pre-employment background and drug test. Retain any licenses that are required by National, State and Local codes. Knowledge of applicable NFPA standards. Preferred: NICET III preferred in the subfield of Special Hazard Systems or Level III in subfield of Fire Alarm.

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $salary range and sign-on bonuses up to $3,000 (per location).Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as a HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations.#hvac #refrigeration #hvactechnician#hvaclife #hvaccontractor #hvacrepair #hvacservice #airconditioning #heatingandcooling #commercialhvac #residentialhvac Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refrigeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Milwaukee metro area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Responsibilities: Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance related position within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned duties Physical Requirements: Ability to lift 55 lbs. overheadAbility to be on feet up to 12 hours.Ability to walk, stand, crouch, push, pull, and climb to perform dutiesWhile performing the duties of this job, the individual is occasionally exposed to moving mechanical parts, fumes or airborne particlesand outside weather conditionsThe noise level in the work environment is usually loudThe work environment can be very hot, over 90 degrees.Vision: 20/20 corrected and normal hearing rangeDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Fabricator II Essential Functions: Select dies, tools, punches for proper thickness of materialSelect proper CNC program for laser cutting.Form material according to drawings using various radius diesInstall and align progressive compound, forming, blanking, piercing, coining, embossing, notching and combination punches and diesMonitor the condition of equipment and toolingPerform preventative maintenance proceduresPerform first piece and in progress inspection to ensure that work meets all requirementsAdjust stroke, feed equipment, knock out devices, work holders and safety devicesInstall and align punches and dies in proper tool station to perform required operationsMonitor condition of tooling and inform supervisor or team lead when punches and dies need sharpeningMaintain safe and clean working environment by complying with procedures, rules, and regulationsConserve resources by using equipment and supplies as needed to accomplish job resultsContribute to team effort by training others in performance of fabrication tasks as neededInspect all work prior to passing it on to the next operationDocument actions by completing production and quality forms Required Knowledge, Skills and Abilities: Must be able to safely use small hand and power toolsMust be able to read bills of materials and interpret drawings of moderate to advanced complexity.Must have basic computer skillsMust be able to safely operate fabrication machinery such as press brake, punch press, etc Education/Experience: High School diploma, GED or combination of work experience and skill development required3 or more of experience working as a metal fabricator in a manufacturing environment desirablePhysical Demands: (The work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles) Frequencies: Occasional (1-33%); Frequent (34-66%); Continuous (67-100%) Lifting Demands Lift up to 75 lbs on an occasional basis floor to waistLift up to 50 lbs on a frequent basis floor to chestCarry up to 75 lbs on an occasional basis up to 25 feetPush/pull up to 100 lbs on an occasional basis Postural Demands Standing - continuousWalking - continuousBending/stooping - continuousSquatting/kneeling - continuousLifting - continuous Miscellaneous Demands Griping, manipulation, fingering - frequent to continuousVariable hand/power tool use - frequentTwo-person lifting tasks using assistive devices for lifting, pulling and pushing including hand trucks, pallet jacks, forklifts and hoists Customer Satisfaction/Safety/Quality/Environmental: Our goal is to provide a world-class service to our customers by delivering defect-free products on time to both our internal and external customers Your comments and suggestions are an integral part of our successResponsible for ensuring that quality systems function effectively and products meet customer requirements Responsible for following safety and environmental rules and regulationsResponsible for ownership of his/her own safety and that of their coworkersResponsible for maintaining a safe and healthy work environment Making certain potential hazards are identified and corrected in a timely mannerResponsible and empowered to make the decisions and take the necessary actions that are required to fulfill the quality policyResponsible for the quality of his/her workConform to G&W's Environmental Management System (EMS) and comply with applicable regulatory requirementsContribute to continual improvement of activities, products and services that will help prevent pollution, reduce waste and protect our environment Why join us G&W enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Come fly with Regal Rexnord and watch your career soar! Join the winning team with a company that offers excellent opportunities to grow your career. Based on experience we will offer $22.00-$30.00/Hr., along with a very competitive benefit package, including 401(k) with a match, that starts day one. We are located in a state of the art, climate controlled building.Regal Rexnord’s Aerospace and Defense business is on an upward trajectory, we are rapidly growing, and we have opportunities to add new team members. Are you interested in joining a growing team with a fantastic culture that is offering a $4,000 sign-on bonus. Win!Key Accountabilities· Work from process sheets, blueprints, setup sheets, setup cards, machine status boards, and verbal as well as written instructions.· Machine and install or re-cut chuck jaws as required.· Insert and secure tooling in machine turrets and preform machine set ups.· Download and upload programs into machine, and make minor programming adjustments as needed.· Operate different types of computerized numerical controls to manufacture a finished machined product by performing a wide range of machining operations within tight tolerances.· Inspect own work for correct dimensions and ensure that company quality and quantity standards are maintained and complete required documentation. Will be required to inspect the work of other machinists.· May be required to operate multiple machines and rotating departments.· Enters data into ERP system.· Load and unload component piece parts with weights up to 25 lbs· Other duties as assigned.Qualifications“This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position”.· Previous experience and demonstrated proficiency in operating CNC lathe, CNC mill machines, or resistance spot welder (any combination of two machines), with intermediate knowledge and experience with setting up machines.· Requires a high school education or equivalent experience.· Must be reliable with minimal call-offs during the year, we value and expect good attendance· Minimum of 2 years of related experience, and knowledge of machining principles and methods for computer numerical controlled machine tools required· Demonstrated ability to perform basic mathematical calculations.· Must be able to read and interpret work instructions and blue prints in English.· External candidates will be required to pass a Machinist test which measures mechanical aptitude.BenefitsMedical, Dental, Vision and Prescription Drug CoverageSpending accounts (HSA, Health Care FSA and Dependent Care FSA)Paid Time Off and Holidays401k Retirement Plan with Matching Employer ContributionsLife and Accidental Death & Dismemberment (AD&D) InsurancePaid LeavesTuition AssistanceAbout Regal RexnordRegal Rexnord is a $6.5B publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power,transmitand control motion. The Company’s electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company’s automation offering,comprisedof controllers, drives, precision motors, and actuators, controls motion in applications ranging from factory automation to precision tools used in surgical applications.The Company’s end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture.Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com.Equal Employment Opportunity StatementRegal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail .Equal Employment Opportunity PostersNotification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Overview: Tire Technician – Part-Time – Round Lake BeachDiscount Tire2125 N IL ROUTE 83ROUND LAKE BEACH, IL, 60073-4906OverviewThe Tire Technician is the backbone of our success and is the first step in your journey with Discount Tire. Our Tire Technicians repair, install, and maintain tires on cars, trucks, and commercial vehicles. At Discount Tire, we commit to growing our employees and routinely promote from within. Part-Time100% On SitePay Scale From $15$17Starting ImmediatelyAt a Glance:A Part-Time Tire Technician at Discount Tire performs the following duties, including but not limited to:Install new tires and wheelsPerform maintenance on tires, including rotations, balancing, repairs, and cleaningRewarding Career Path to ManagementFollow safety guidelines and best practicesParticipate in hands-on, on-the-job trainingProvide a world-class customer service experienceWhat We’re Looking For:Must have an upbeat outlookMust be dedicated and reliableMust be coachable and trainableMust be able to lift a minimum of 50 lbs.Must enjoy and excel in a team environmentMust be able to function well in a physically demanding environmentWhat We Offer:Discount Tire is committed to supporting our employees. We continually assess our benefit offerings and the needs of our employees to ensure we offer the support our employees need, personally and professionally.Part-Time Benefits:Paid TrainingCompetitive PayWeekly Paychecks401(k) Retirement PlanEmployee Referral BonusEmployee Assistance ProgramEducational Assistance ProgramExclusive Employee Discount ProgramDiscount Tire stands by our Veterans. We are proud to say that we are a Veteran-Friendly organization. Glassdoor names Discount Tire as one of the Best Places to Work in 2018, 2019, 2020, and 2021.Why Discount Tire At Discount Tire, we are dedicated to helping our employees reach their full potential and achieve their career goals. Our comprehensive mentoring program is designed to provide the support, knowledge, and skills needed to succeed and grow within the company. We are committed to promoting from within and investing in the development of our employees. With our strong emphasis on the principles and standards that define who we are as a company, you will have the opportunity to build a lucrative and fulfilling career at Discount Tire. In fact, all our store managers started in our stores and have progressed through the ranks thanks to our commitment to coaching and mentoring our people. Join us and see where your career can take you.Who We Are:In 1960, Bruce T. Halle founded the first Discount Tire in Ann Arbor, Michigan. Starting with an inventory of only six tires, Halle grew his store by cultivating connections to the community and honoring relationships with customers and employees. Through respect, fairness, and a willingness to always pay it forward, Halle transformed his store into a thriving, responsible business.Today, Discount Tire is America’s largest independent tire and wheel retailer. Our 1,100+ locations across 37 states provide a wide range of product choices, affordable pricing, and expert staff. More importantly, all our stores offer the individual customer focus and warm personal touch you’d expect from a neighborhood store. In the spirit of the first Discount Tire store, we maintain commitments to mutual respect and fairness for all through community engagement and responsible growth.Discount Tire continues to prosper because of the vision that lives and thrives in the hearts of our employees, from the store level to the corporate level. Visit one of our stores today and experience the values that make Discount Tire the nation’s most trusted tire and wheel retailer.Learn more about our Company, our culture, and our benefits by visiting careers.discounttire.comDiscount Tire provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Responsibilities: #discounttire21

Are you a skilled Automotive Technician / Mechanic looking to grow your career We have a great opportunity available at Belle Tire! We offer top pay and great benefits. Apply today! The Automotive Technician is committed to providing the highest quality of repairs and service necessary to satisfy the customer. They should be ambitious, hard-working and work well in a team environment. You must be state certified (Applicable in Michigan Only), knowledgeable and have experience in areas covered by the ASE certification programs (Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/Diesel). Job Details: What you'll do: Performs vehicle repairs (Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance).Maintains an organized and safe work environmentOther duties as assigned by manager Requirements: 18 years oldA valid driver's license is required for this position A minimum of 2 years of automotive repair experience with emphasis on under-car repairs, braking systems and alignmentsHigh school diploma, GED, or vocational certificate is helpful Ability to lift an object weighing up to 75 pounds Varying work hours, Monday through Saturday. Workshop environment, with heavy physical requirements and long periods of standing. Job Benefits: Paid weekly - commission basedCompany contributions to 401kProduct and service discountsFlexible paid time offCompetitive health insurance for eligible employeesOpportunities for career advancement with an outstanding family company Belle Tire was established 100 years ago with the belief that customer satisfaction must always be the bottom line. This year we celebrate 100 years in business, the extraordinary team that got us here and the team that will carry us into the next 100 years.As a family owned company with over 130 retail locations and over 2,000 employees in Michigan, Indiana, Illinois and Ohio, we give our neighbors peace of mind and trust that we will get them back on the road fast and affordably. Belle Tire provides tire and automotive services including shocks and struts, oil changes, brakes, batteries, auto glass and more with an in-store experience that far exceeds a traditional garage. Belle Tire is an equal opportunity employer. At Belle Tire we are committed to treating all applicants and employees fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, religion, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law.

AutoReqId: 19588BR Pay Class: Hourly Hourly Pay Rate: 41.70 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Mobile Equipment Mechanic for our Thornton, Illinois facility located in 620 W 183rd. St Thornton, IL 60476 Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. What We Are Looking For Prefer high school diploma or general education degree (GED)Must have a minimum of one year of experience repairing heavy equipment or vocational trainingNYS Heavy Equipment Inspector’s License or ability to obtainMust be able to write legibly to complete work orders and other required paperworkMust be able to read and comprehend maintenance manualsMust have basic hand and air tools required to repair heavy duty trucks.1 to 4 years of experience required. WORK ENVIRONMENT Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75-100 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramTuition ReimbursementUnlimited Career PathWellness ProgramAnd More!What you will do Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with "Prime" electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.How you will do itInstalls raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.Mounts and terminates controls equipment as needed.May assist sales with electrical estimates, including walking retrofit projects.Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).Keeps management informed of job needs, progress and issues.Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to JCI Engineering on changes and keeps as-built drawings current.Resolve job site conflicts regarding installation issues or escalates concerns to management as required.Communicates with the customer as necessary upon arrival and before leaving the work site.Adheres to Johnson Controls safety programs and policies.Performs other related duties as assigned.What we look for RequiredElectrical apprenticeship or formal training in electrical installation techniques.Demonstrated ability to read and interpret drawings.Possesses working knowledge of local codes as it applies to controls.Experienced in scope determination of installation materials. Able to work independently.PreferredFour years’ experience directly with controls installations.

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive payMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Project/BusinessResponsibilities:Manages the Service P/L for assigned branch(s).Forecasts manpower requirements.Effectively prioritizes customer calls and advises dispatch accordingly.Ensures customer requirements are followed and calls are completed on a timely basis.Ensures customer rules are accurately adhered to and approves work orders.Reviews dashboards and financial reports and takes appropriate action.Oversees the procurement of parts and supplies.Maintains communication with customers and ensures their expectations are met.Resolves issues or problems that impact customer satisfaction.Manages and maintains fleet, parts and materials inventory, and resolves discrepancies or problems in a timely manner.Develops and maintainslong term relationships with customers and subcontractors.People Responsibilities:Communicates company direction, sets expectations and holds team accountable for results.Provides leaderships, builds a collaborative team and rewards accomplishments of the team.Interviews, selects, hires, and oversees onboarding of supervisors, team leads and technicians.Ensures technicians are scheduled and dispatched efficiently, based on skill level, location, and call volume.Manages performance and provides training, coaching and performance feedback to Supervisors, Team Leads and Technicians.Uses metrics to drive accountability and performance.Ensures compliance of Service policies and procedures, including eSo, refrigerant tracking, time and attendance, etc.Ensures use of PPE and the application of safe behavior, including driving, by all employees.Ensures customer service and quality of work meets customer requirements and Source standards. Qualifications: Project/Business Management:High school diploma, GED, or completion of trade program or technical school. College degree is a plus.10 + years of experience in the refrigeration/HVAC service, commercial construction, or a related industry.Knowledge of commercial refrigeration and HVAC principles and practices, including service hour estimation, labor forecasting, and multiple disciplines involved in area of responsibility.Proficiency in understanding and managing P&L.Demonstrated business acumenProficiency in managing multiple assignments, setting and balancing competing priorities with strong organizational skills and ability to multi task.Ability to solve problems and apply good judgement.Excellent verbal/nonverbal and written communication and presentation skills.Strong customer service skills, including an ability to proactively address customer issues and concerns and ability to forge strong working relationships with customers.Knowledge of jobsite safety, ability to oversee work activities to ensure safe work practices and safety rule compliance.Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools including E-Mail, Word, Excel, Work Order/Dispatch Software, Enterprise Resource Planning (ERP) software, etc.Good driving record.People Management:5 + years of people management experience.Strong leadership skills, with demonstrated experience managing a diverse and multi-discipline workforce.Proficient in coaching, training, developing and building a team.Proficient in managing time, delegating assignments and following through to ensure good results. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, mgr, lead, supervisor, leader, regional, HVACR, supermarket, rack systems

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Milwaukee metro area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high-speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in a metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high-speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. This is a 3rd shift role working 10:00pm to 6:30am, Sunday night to Friday morning SIGN ON BONUS: This position is eligible for a $2,500.00 sign on bonus with $1,000.00 payable after successful completion of 90 days of employment and the remaining $1,500.00 after successful completion of 6 months of employment. Maintenance Technician III Position Summary: Support production and facilities through a combination of preventive and reactive maintenance efforts. Essential Functions: Troubleshoot, repair and installation of a wide variety of complex electrical and mechanical equipment, including manual and automatic machinesWork on process controls and/or electronic controlsWork independently on secondary distribution systems, house wiring and three phase industrial powerPerform general maintenance on machines, conveyors and structural material; including welding using arc, gas or automatic welding equipment Perform general layout and construction activities requiring advanced metal fabrication, carpentry and plumbing skillsCommunicate status of repairs and/or expected down times to Maintenance Manager and Production Managers and Supervisors as neededWork with Maintenance Supervisor and Manager to develop and implement a preventive maintenance scheduleMaintain safe and clean working environment by complying with procedures, rules, and regulationsConserve resources by using equipment and supplies as needed to accomplish job resultsContribute to team effort by training others in performance of maintenance tasks as neededInspect all work prior to passing it on to the next operationDocument actions by completing production and quality forms Required Knowledge, Skills and Abilities: Must be able to safely use hand and power toolsMust be able to read and work from construction, mechanical and electrical drawings Must have basic computer skillsMust possess construction skills in light metal fabrication, carpentry, plumbing and electrical Must be capable of installing, maintaining and repairing a variety of manual and automated machinery Education/Experience: High School diploma, GED or combination of work experience and skill development required 2+ years experience working in a manufacturing environment 5+ years in general building maintenance, i.e., cleaning, painting and building repair as required5+ years experience installing, maintaining and repairing a variety of manual and automated production machinery Physical Demands: (The work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles) Frequencies: Occasional (1-33%); Frequent (34-66%); Continuous (67-100%) Why join us G&W enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

$5,000 Sign On Bonus. (Bonus of $1,250.00 which will be paid every 3 months for your first year of employment. Note that you must be employed and maintain a full-time status at the time the bonus is paid in order to be eligible.) Are you a skilled Automotive Technician / Mechanic looking to grow your career We have a great opportunity available at Belle Tire! We offer top pay and great benefits. Apply today! The Automotive Technician is committed to providing the highest quality of repairs and service necessary to satisfy the customer. They should be ambitious, hard-working and work well in a team environment. You must be state certified (Applicable in Michigan Only), knowledgeable and have experience in areas covered by the ASE certification programs (Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/Diesel). Job Details: What you'll do: Performs vehicle repairs (Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance).Maintains an organized and safe work environmentOther duties as assigned by manager Requirements: 18 years oldA valid driver's license is required for this position A minimum of 2 years of automotive repair experience with emphasis on under-car repairs, braking systems and alignmentsHigh school diploma, GED, or vocational certificate is helpful Ability to lift an object weighing up to 75 pounds Varying work hours, Monday through Saturday. Workshop environment, with heavy physical requirements and long periods of standing. Job Benefits: Paid weekly - commission basedCompany contributions to 401kProduct and service discountsFlexible paid time offCompetitive health insurance for eligible employeesOpportunities for career advancement with an outstanding family company About Us: Belle Tire was established over 100 years ago with the belief that customer satisfaction must always be the bottom line. As a family owned company with over 175 retail locations and over 3000 employees in Michigan, Indiana, Illinois and Ohio, we give our neighbors peace of mind and trust that we will get them back on the road fast and affordably. Belle Tire provides tire and automotive services including shocks and struts, oil changes, brakes, batteries, auto glass and more with an in-store experience that far exceeds a traditional garage. Belle Tire is an equal opportunity employer. At Belle Tire we are committed to treating all applicants and employees fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, religion, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law.

AutoReqId: 19588BR Pay Class: Hourly Hourly Pay Rate: 41.70 Department: Maintenance Line of Business: Aggregates Position Type: Full-Time Job Posting: Heidelberg Materials is seeking a Mobile Equipment Mechanic for our Thornton, Illinois facility located in 620 W 183rd. St Thornton, IL 60476 Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. What You'll Get To Do Ensure compliance with all health, safety, and environmental regulations, and with company policies and procedures.Repair and maintenance functions consist of the following:Will perform diesel and gasoline engine repairs.Will diagnose and perform power train component repairs.Ability to troubleshoot and perform hydraulic system repairs.Must have a complete knowledge of truck air brake systems with the ability to diagnose and repair problems.Ability to repair suspension and steering system.Ability to troubleshoot and repair electrical systems.Ability to perform specialized component repair such as hydraulic and mechanical drives.Ability to make minor repairs including welding and cutting.Ability to perform and track Scheduled Maintenance in accordance with Hanson’s PM Program.Ability to perform road calls in a safe, fast and professional manner when necessary.Must have knowledge of OSHA regulations and safety orders, including safety precautions on raised truck beds, brakes, mixer lockouts, etc.Will maintain good housekeeping with the ability to keep company records and complete work orders on equipment.Will perform other duties and assignments as required. What We Are Looking For Prefer high school diploma or general education degree (GED)Must have a minimum of one year of experience repairing heavy equipment or vocational trainingNYS Heavy Equipment Inspector’s License or ability to obtainMust be able to write legibly to complete work orders and other required paperworkMust be able to read and comprehend maintenance manualsMust have basic hand and air tools required to repair heavy duty trucks.1 to 4 years of experience required. WORK ENVIRONMENT Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods of time in same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75-100 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Heidelberg Materials is a drug free workplace Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: With over 150 years of experience, and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay$10,000 Sign On Bonus!Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K) matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities available nationwideEmployee discounts on vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: The HVAC Branch Manager leads technicians who install, repair, and maintain HVAC and refrigeration systems for commercial customers. This manager routinely works directly with service and install technicians, dispatch personnel, and other managers to ensure customer satisfaction while meeting departmental goals and objectives. Presenting himself as a senior company representative, the Branch Manager often communicates directly with customers, vendors, and suppliers to ensure accurate communication of job or project status and requirements.Communicates regularly with dispatch to ensure that personnel are being scheduled properly by skill level, efficiency, and training requirements.Communicates daily with dispatch reporting on project information, estimated time to complete jobs, labor hours, and parts or material used.Reviews work orders, invoices, and time reports for accuracy and maintains minimal accounts receivables.Develops and monitors budgets, goals, and objectives to ensure departmental profitability.Maintains communication with vendors and factory personnel concerning warranty issues, product recall notices, operational problems with products, premature failures, and other issues. Qualifications: 5+ years of successful and recent HVAC and Refrigeration service management experienceTwo years of technical training or a bachelor’s degree is preferredAbility to perform advanced-level maintenance and service on HVAC and Refrigeration equipmentSolid working knowledge of Word, Excel, and Outlook and the ability to learn new systemsEPA Universal CertificationValid driver’s licenseProblem-solving and conflict management skillsDetail-oriented and highly organized with the ability to handle multiple tasks and assignmentsAbility to generate ideas and create processes to grow the service departmentRead and interpret documents such as safety rules, operating and maintenance instructions, and procedure manualsAbility to work well with management, executive leadership, support staff, and techniciansAbility and willingness to work a non-standard schedule: nights, weekends, and holidays, as necessary Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, mgr, lead, supervisor, leader, regional, HVACR, supermarket, rack systems

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Milwaukee metro area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree in a technical field (engineering, construction management, IT etc.) and graduating in December 2024 and May/June 2025. Program starts January 6, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs

Responsibilities: Work with little to no supervisionClean and lubricate shafts, bearing, gears, and other parts of machineryTroubleshoot/repair machinery such as slitters, collectors, high-speed welders, conveyors, and palletizersInstall and maintain pipe systems, hydraulic and pneumatic equipmentRepair and replace gauges, valves, pressure regulators, and other related equipmentBuilding maintenance including minor plumbing, welding, and general upkeepRepair and assess electrical issues as they ariseAble to familiarize yourself with our CMMS system and log labor/parts according to established expectationsMust be willing to work overtime, including weekends and off-shifts as requiredMust participate in on-call program and may be required to work additional hours on off shift due to on-call programUnderstands quality, PPE requirements, safety, and the importance of complying with safety policies and procedures. Requirements: High School Diploma or equivalent – Technical degree in maintenance-related field preferred2 years minimum experience as a maintenance mechanic in a metal manufacturing environment with the ability to troubleshoot preferred but not requiredKnowledge of Good Manufacturing Practice ISO9001 standards for metals manufacturingPLC experience preferredExperience with and ability to use all types of welding, cutting, machine, and hand tools preferredExperience in high-speed packaging, welding, and mechanical power transmission preferred Work Environment: While performing the duties of this job, the employee is frequently required to walk. The employee is required to stand for long periods of time, use arms and hands to feel or reach, stoop, kneel, crouch or crawl on occasion, talk and hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. The employee is frequently exposed to moving mechanical parts. The employee may work with materials that could irritate eyes, skin and breathing. Appropriate personal protective equipment is required. The employee will be working near and/or with high-speed automated equipment. This may cause risk of injury if safety procedures are not followed. The work environment is often noisy and hearing protection is required.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Welder - 9:00pm to 5:30am - 3rd Shift Welder I Responsible for setting up and operating welding equipment together with atmospheric control equipment to perform difficult welding operations on a wide range of metals and alloys for complicated subassemblies and assemblies involving coinciding requirements for high strength, pressure and aesthetics. Essential Functions: Assemble, align, square up and tack weld a variety of complicated subassemblies and assemblies using B/Ms, steel tape, straight edge, squarer, clamps, jacks fixtures, templates and similar equipmentFit part using torch or carbon arc or hand grinding equipment to facilitate alignment and assemblySet up and regulate pressure for oxyacetylene torchSelect electrode size and type, tips and welding rod or wire as requiredRegulate gas for proper atmospheric control, current and voltage for proper penetration and fusing of metals Check and straighten gasket surfaces and grind excess weld from finished workLay out and secure work which may involve heavy parts and assemblies Regulate current and voltage for proper penetration and fusion of similar and dissimilar metalsPerform Mig/Tig Welding as requiredPerform preventive maintenance procedures as neededProvide personal tools as requiredMaintain safe and clean working environment by complying with procedures, rules, and regulationsConserve resources by using equipment and supplies as needed to accomplish job resultsContribute to team effort by training others in performance of welding tasks as neededInspect all work and insure it meets requirements prior to passing it on to the next operationDocument actions by completing production and quality forms Required Knowledge, Skills and Abilities: Must be able to safety use small hand and power tools, measuring tools, air tools and welding equipmentMust be able to read and interpret Drawings and Bills of MaterialMust have basic computer skillsMust be able to perform Mig and Tig welding Education/Experience: High School Diploma, GED, or equivalent work experienceAt least one year of formal welding training or the equivalent level of experienceThree years of welding experience in a manufacturing environment Physical Demands: (The work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles) Frequencies: Occasional (1-33%); Frequent (34-66%); Continuous (67-100%)Why join us G&W enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world! G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires. *G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

Are you a skilled Automotive Technician / Mechanic looking to grow your career We have a great opportunity available at Belle Tire! We offer top pay and great benefits. Apply today! The Automotive Technician is committed to providing the highest quality of repairs and service necessary to satisfy the customer. They should be ambitious, hard-working and work well in a team environment. You must be state certified (Applicable in Michigan Only), knowledgeable and have experience in areas covered by the ASE certification programs (Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance, Light Vehicle/Diesel). Job Details: What you'll do: Performs vehicle repairs (Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning and Engine Performance).Maintains an organized and safe work environmentOther duties as assigned by manager Requirements: 18 years oldA valid driver's license is required for this position A minimum of 2 years of automotive repair experience with emphasis on under-car repairs, braking systems and alignmentsHigh school diploma, GED, or vocational certificate is helpful Ability to lift an object weighing up to 75 pounds Varying work hours, Monday through Saturday. Workshop environment, with heavy physical requirements and long periods of standing. Job Benefits: Paid weekly - commission basedCompany contributions to 401kProduct and service discountsFlexible paid time offCompetitive health insurance for eligible employeesOpportunities for career advancement with an outstanding family company Belle Tire was established 100 years ago with the belief that customer satisfaction must always be the bottom line. This year we celebrate 100 years in business, the extraordinary team that got us here and the team that will carry us into the next 100 years.As a family owned company with over 130 retail locations and over 2,000 employees in Michigan, Indiana, Illinois and Ohio, we give our neighbors peace of mind and trust that we will get them back on the road fast and affordably. Belle Tire provides tire and automotive services including shocks and struts, oil changes, brakes, batteries, auto glass and more with an in-store experience that far exceeds a traditional garage. Belle Tire is an equal opportunity employer. At Belle Tire we are committed to treating all applicants and employees fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, religion, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law.

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramTuition ReimbursementUnlimited Career PathWellness ProgramAnd More!What you will doInspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Suppression life safety product lines as well as similar competitive manufacturers’ product lines.How you will do itWork with low voltage wiring and associated devices for the operation of low voltage equipment.Complete Service Acknowledgements with proper coding through communication devices such as laptop computers and/or hard copy.Follow and maintain a highly structured inspection schedule.Input, retrieve and archive inspection documents via laptop computer.Make minor repairs and programming changes to systems being inspected.Provide technical training to less senior inspectors and trainees.Complete assigned inspections on time.Perform other duties as assigned.What we look forFire alarm license1 to 2 years documented service experience in fire alarm or fire sprinkler.Experience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Demonstrates an aptitude for troubleshooting systems and performing necessary repairs.Ability to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including weekends to meet customer requirements.Ability to adhere to, implement, and always follow safety guidelines and procedures.Able to obtain and retain any licenses that are required by National, State and Local codes.Successful completion of the Inspector Entre Course (Electrical or Sprinkler).Possess a valid driver’s license and driving record that meets company requirements.Demonstrate a high level of customer service.Ability to work well with others.Self-starter that can work with little to no supervision.Strong organizational skills, positive attitude, and ability to learn quickly.High School Diploma or equivalent required.PreferredSpecial Hazards experienceFire pump experienceService backgroundNICET Level II certificationBackflow LicenseFamiliarity with sprinkler systems and extinguishers

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as a HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations.#hvac #refrigeration #hvactechnician#hvaclife #hvaccontractor #hvacrepair #hvacservice #airconditioning #heatingandcooling #commercialhvac #residentialhvac Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refrigeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

The production line mechanic will be responsible for all production maintenance, including product quality control, line maintenance, and repair of line machinery and equipment. This role involves applying mechanical expertise in determining work methods and procedures for producing quality product. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Responsibilities: Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assigned Requirements: High School Diploma or GED3-5 years’ experience in a maintenance of Can Assembly Presses within a manufacturing environment; or equivalent combination of training and experienceMaintenance and repair of waxers, scroll shears and Cone Top presses.Ability to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesDo you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive. Inspector I General Summary: Inspect component parts and completed product for conformance to process controls using visual inspection and various measuring tools of basic complexity Essential Functions: Perform final inspection tasks on all switches and part orders being shipped.Train production personnel in effective methods to control processes.Perform internal process audits as required, report all findings.The position has the authority to "shut down" non-conforming processes after notifying Supervisor.Communicate drawing discrepancies to Engineering.Participate in customer inspections as needed.Assist team members in preparing and entering NCRs (Non-Conformance Reports).Write Customer Improvement Initiative (CII) for audits and assist employees who wish to report a problem requiring corrective action for repetitive problems.Report violations of ISO standards to the Quality Manager.Participate in the prototype review process for all newly developed products as neededAssist in the dimensional analysis of components to help identify potential quality issues.Responsible (along with team members from product engineering, manufacturing engineering, and production) for the creation/implementation of process control charts for all critical processes Maintain safe and clean working environment by complying with procedures, rules, and regulations.Conserve resources by using equipment and supplies as needed to accomplish job results.Contribute to team effort by training others in the performance of inspection tasks as needed.Inspect all work prior to passing it on to the next operation.Document actions by completing production and quality forms. Required Knowledge, Skills and Abilities: Ability to read and interpret drawings, schematics, bills of material, wiring and ladder diagrams desirableMust have basic computer skills in MS Word and Excel Experience using an ERP system desirableAbility to utilize measuring devices such as calipers and micrometers, "Fluke" multimeterMust be able to understand and follow verbal and written instructions in English. Education/Experience: High School diploma, GED, or combination of work experience and skill development required1-3 years of experience working in a manufacturing environment is desirable Physical Demands: (The work is classified as Medium - Heavy Physical Demand Level (PDL) by the US Dept of Labor's Dictionary of Occupational Titles) Frequencies: Occasional (1-33%); Frequent (34-66%); Continuous (67-100%) Why join us G&W enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world!G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires.*G&W Electric participates in the E-Verify process for all new hires. VEVRAA Federal Contractor

The Assistant Manager is a positive, high-energy, customer-focused position. You are provided with the opportunity to grow as an individual and team member in the tire and automotive industry. Job Details: What you'll do: Build customer relationshipsAssess customers' needs and provide Belle Tire solutions according to their needs Follow Belle Tire's Sales ProcessManage a cash drawer; cash customers out and maintain daily cash reconciliationMeet and exceed defined goals and objectivesDirect the workflow in the service departmentHandle day to day paperwork involved with retail operations Work well in a team environment with a positive attitudeDo the right thing for the customers, employees, and vendorsContinuous thinking and sharing of ideas to improve Belle TireOther duties as assigned by manager Requirements: 18 years of ageValid drivers' license High School Diploma/GED is requiredAbility to communicate clearly and professionally with co-workers, management and customers.Ability to lift an object weighing up to 75 poundsVarying work hours, Mon-Sat, some overtime may be required. Workshop environment, with heavy physical requirements and long periods of standing. Job Benefits: Company contributions to 401kProduct and service discountsFlexible paid time offCompetitive health insurance for eligible employeesOpportunities for career advancement with an outstanding family company About Us: Belle Tire was established over 100 years ago with the belief that customer satisfaction must always be the bottom line. As a family owned company with over 175 retail locations and over 3000 employees in Michigan, Indiana, Illinois and Ohio, we give our neighbors peace of mind and trust that we will get them back on the road fast and affordably. Belle Tire provides tire and automotive services including shocks and struts, oil changes, brakes, batteries, auto glass and more with an in-store experience that far exceeds a traditional garage. Belle Tire is an equal opportunity employer. At Belle Tire we are committed to treating all applicants and employees fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, religion, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law.

As a part of Johnson Controls’ Data Center Solutions business unit, Silent-Aire is on the forefront in the creation of new and exciting products to support the data center industry. Our custom computer room air handling units (CRAHU) are industry leading examples of some of the most highly energy efficient and sophisticated cooling systems in the world. We are a diverse, upbeat, creative, team-oriented group of technicians, engineers and managers working on a daily basis to develop data center cooling equipment that is changing the face of the data center facility. Take some time to learn about us and apply today! Help us drive customer wins and be a part of a team that believes that through teamwork, leadership, and collaboration - anything is possible. What we offerCompetitive payPaid vacation/holidays/sick time - 10 days of vacation, 10 paid holidays, and five sick days each yearComprehensive benefits package including 401(K) with match as well as insurance coverage that starts on day one (medical, dental, and vision care)Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat we look forWe are seeking for this role a field services technician to assist and support other team members in commissioning and after sales service. You will successfully work unsupervised and be capable of making informed decisions to complete the tasks as instructed.How you will do itCheck in with Manager after the end of each workday while in the FieldDuring, and/or at the end of each day/job, complete all company provided forms to the fullest extent possible.Responsible for completing daily scheduled tasks.Check in with client at the beginning and end of each day.Obtain client signature on company provided forms where applicable.Use Time Clocks in the plant and ADP app when in the Field to account for daily times.Hand in paperwork at the end of each trip for processing in sequential order.Ensure all receipts or invoices for expenses have job numbers and get sent to the correct person.Ensure all excess materials used for each job are listed properly and documented.Assist on job sites with other JCI/Silent-Aire Field Technicians as needed.Answer all office emails/calls in a timely manner.Check in as needed to ensure Manager or Field Supervisor are aware of your status.Secure parts and tools needed throughout the day for various jobs as required.Report all warranty repairs to the Manager or Field Supervisor and provide the necessary info needed to report back to the plant if it is a Silent-Aire internal issue.Consult Manager or Field Supervisor in times of uncertainty.Give training to Field Service Technician – Level 1 and support as needed.Follow all company policies and lead by example. Respect and strictly adhere to the non-disclosure policies, on the jobsite and away.Maintain all safety equipment at all times.What we look forRequired:Must have a high school diploma or equivalent GED certificateFull understanding of basic electrical and control systems and how electricity works as well as the process of treating air to simultaneously control its temperature, humidity, and distributionGeneral knowledge of HVAC and mechanical systemsAbility to identify 3-phase versus single phase wiringUnderstanding of Parallel and Series circuitsUnderstand OHMS Law and able to use a multi-meter to read voltage, resistance valuesAbility to read, understand and work from mechanical drawingsAbility to maintain required records and prepare reportsMust possess valid passport/driver’s licenseAptitude and communications skills related to acting independentlyTechnical and working knowledge of internal and industry design and construction codes and standardsProven planning, organizational, problem solving, decision–making, supplemented with a practical aptitudeAbility to lift 40lbs and use ladders working from heightsExperience working in Industrial, Manufacturing Facilities and/or Field environmentsBasic knowledge of Windows and Microsoft Office (Outlook Word, Excel, etc.)Preferred:Registered refrigeration/HVAC tech, controls tech, Electrician Journeyman, or related tradespersonExperience working in highly sensitive and/or mission critical facilitiesAdditional DetailsMust be able to drive to local job site locationsOn-call and overtime hours as neededPersonal Protective Equipment (PPE)Must be able to pass a DOD background check, requiring proof of US CitizenshipWillingness to travel to customer locations (domestic and international)This is a safety sensitive positionCompany uniform requiredGood hygiene and cleanliness are required at all times#LI-JJ1#LI-Onsite

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $salary range.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as a HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations.#hvac #refrigeration #hvactechnician#hvaclife #hvaccontractor #hvacrepair #hvacservice #airconditioning #heatingandcooling #commercialhvac #residentialhvac Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refrigeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems