FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ManTech seeks a motivated, career and customer-oriented Senior RF Spectrum Technician to join our team working in Crane, IN. This is an onsite position.Responsibilities include but are not limited to:Utilize ground tactical Intelligence, Surveillance, and Reconnaissance (ISR) collection to successfully perform technology assessments and evaluations in support of the Special Operations Forces (SOF) communityDevelop test plans into test casesTravel up to 25% within the continental United StatesMinimum Qualifications:Bachelor’s degree in a technical discipline or business OR an Associated degree in a technical discipline or business and an additional 4 years of experience OR High school diploma or equivalent and an additional 6 years of experience.3+ years of experience in Intelligence, Surveillance, and Reconnaissance (ISR) collectionPractical experience in RF principles wireless communication and data networksMust understand the tactical level Concepts of Operations (CONOPS) and Training Project Plan (TPP) in the use of similar technologiesPreferred Qualifications:Understanding of required test equipment for each assessment and evaluation event when developing test plans into test casesBachelor of Science in Electrical Engineering preferred but not required with appropriate tactical collection level experience.Clearance Requirements:Must be a U.S. Citizen and possess an active or current Top Secret with SCI eligibility Security ClearancePhysical Requirements:The person in this position must be able to remain in a stationary position 50% of the time.Occasionally move about inside the office to access file cabinets, office machinery, or to communicate with co-workers, management, and customers, via email, phone, and or virtual communication, which may involve delivering presentations.

Job Description: Maintenance Technician"To become the world’s greatest baker, we need the world’s greatest team members!"What FGF Offers:FGF believes in Home Grown Talent, accelerated career growth with leadership training, unleashing your potentialCompetitive Compensation, Health & Welfare Benefits including Vision & Dental and flexible options at competitive premiums401k matching programDiscount program - Restaurants, gyms, shopping, etc.Tuition reimbursementOverview:FGF Brands is growing and we need more talented Mechanics to join our growing team!As a team member, the Manufacturing Mechanicmaintains, troubleshoots, and repairs high-volume food manufacturing equipment. They prioritize personnel and food safety at all times.Starting Wage = $34.75/hour + performance raises + $1/hour shift differential for hours worked between 6:00pm and 6:00am.Location: Brownsburg, INSchedules Available:Nights 6:00pm-6:00am; +20% built in overtime (48 hour weeks)Days 6:00am-6:00pm; +20% built in overtime (48 hour weeks)ResponsibilitiesRespond and react to mechanical issues in the production environment in a timely and efficient manner.Complete maintenance projects - PM tasks and work orders as assigned.Read electrical schematics and mechanical diagrams.Write parts requests, complete work orders, and write corrective work ordersFollow all Good Manufacturing Practices (GMPs).Keep a clean work areaPerform building inspections and routinesCommunicate with other team membersPerform Lock-Out-Tag-Out when necessaryRequirementsMinimum 4 years work experience in a maintenance mechanic environment.Must have strong mechanical and troubleshooting skills.Must have a basic understanding of AC/DC motors, motor control circuits, and photoeyes / sensors, etc.Knowledge of conveyance a strong plus.Must be computer literate.Familiarity with CMMS work order systemsFood manufacturing background a plus with an understanding of FDA requirementsMust have good attention to detail. Ability to understand verbal and written instructions.Should be able to understand blueprints and drawingsMust be able to work independently with minimum supervisionMust be able to work at heights from ladders or scissor liftsMust be able to make decisionsShould have a working knowledge of the following:Welding, Machining, Plumbing, Pipefitting, ElectricityMust be able to work around very strong magnetsMust be able to speak, read, and write EnglishWhat is the recipe for a great career at FGF Working at FGF Brands, there is never a dull moment! FGF is a leading North American bakery company with facilities across the USA and Canada with a specialized focus across all key bakery categories, including naan, muffins, croissants, donuts, cakes, artisan breads and flatbreads.As an innovative company that is continually growing there is always challenging yet rewarding work to be a part of. We have an entrepreneurial spirit that encourages all our Team Members to use their own creativity and out-of-the-box thinking to come up with solutions and new ideas.#LI-CG1#LI-Onsite#Appcast5-10 Job Family: Maintenance Job Level: B-MFG

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.Jabil is a product solutions company providing comprehensive design, manufacturing, supply chain and product management services. Operating from over 100 facilities in 26 countries, Jabil delivers innovative, integrated and tailored solutions to customers across a broad range of industries and end-markets, such as automotive, consumer lifestyle and wearable tech, defense and aerospace, connected home and building, industrial and energy, enterprise and infrastructure, healthcare, mobility, packaging and printing.Jabil is adding a Senior Test Engineering Manager to our team in Northern Kentucky who will directly contribute to the transformative growth within our Advanced Compute division by applying unique and innovative approaches to developing end-customer product solutions. Tasked with overseeing all aspects of test engineering, the Senior Test Engineering Manager will champion innovative solutions to improve product quality and efficiency. This position will play a pivotal role in scaling operations, developing test systems, and driving technical excellence in support of new and sustaining AI/ML and GPGPU and hardware accelerator-based server, networking, and storage platforms.JOB SUMMARYThe Sr. Test Engineering Manager is responsible for providing optimum test solutions and strategies through the effective management of systems, procedures, and equipment. Maintaining and surpassing driven innovations and continuous improvement within Test Engineering by harnessing new technologies in the areas of continuous improvement, testing equipment, and statistical analysis. Provide exceptional support to customers, team members, and shareholders while supporting Global Test Engineering initiatives.ESSENTIAL DUTIES AND RESPONSIBILITIESProvide accurate quotation for new models from new customers and existing customers to ensure company's continuous growth.Guides the Test Engineering Department to operate with a high level of efficiency and integrity.Reviews and develops department structure, seating capacity and forecast. Establishes operations metrics and assets. Develops detailed training plans as needed.Collaborate with executive leadership to ensure alignment of test engineering strategy with overall financial targets.Researches, develops and implements Work Cell systems, support and ISO/QS systems.Compiles and documents data necessary to analyze performance and makes changes in the testing process as needed.Ensure all test equipment is maintained to the best condition for minimum downtime.Seek the new test technologies for employees' development and customers' value added.Set up a failure analysis group to track the cost-effective test reject inventory and reporting process related failure.Establish and maintain departmental policies and best practices to ensure compliance with internal controls, quality standards, and external regulations. Exercise authority to implement procedural changes that enhance operational efficiency and meet corporate objectivesSet up a test development group to increase company value and satisfy customers' needs.Brief executive management on departmental performance, potential risks, and strategic opportunities.Direct and mentor subordinate managers and senior technical leads across multiple test engineering units. Approve hiring decisions, conduct performance reviews, and set strategic priorities in support of new product introductions and sustaining operations.Provide the cost reduction through automation and process simplification.Lead cross-functional initiatives to expand Jabil's competitive advantage in emerging markets and technologies.May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTSPossess expert-level knowledge of test engineering processes within the SMT and electronics industry, specifically pertaining to AI/ML server, storage, networking platforms.Knowledge in computer hardware and software is essential. Ability to handle complex engineering issues and to provide engineering solutions for company operations.Expertise with Jabil's proprietary and custom automated test equipment.Ability to work under tight deadlines with frequently changing priorities.Ability to read, analyze, interpret and communicate regarding common scientific and/or technical journals, financial reports, and legal documents.Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.Ability to effectively present information to top management, public groups, and/or boards of directors. Advanced PC skills, including training and knowledge of Jabil’s software packages.Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume.Ability to apply concepts of basic algebra and geometry.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.Proficiency in use of personal computers, Microsoft Office products (Excel, Word and PowerPoint) and e-mail skills required.EDUCATION & EXPERIENCE REQUIREMENTSBachelor’s degree in Electronics or Electrical Engineering preferred, from an accredited four-year college or university.Minimum of 10 years work-related experience, including a minimum of 5 years management experience is required; or an equivalent combination of education, experience and/or training.Experience in a hardware testing and development environment, preferably with enterprise server, storage or networking products.Expertise with Linux and Linux Shell; capable of training technicians on Linux / Linux Shell basics.Demonstrate the ability to apply principles of statistical analysis: collecting, analyzing, and interpreting data to make data-driven decisions.Intermediate understanding of Bash and Python programming.Display strong understanding of computer/server hardware concepts, functionality, and integration.Experience working in a multi-site and multi-cultural environments.Proven ability to work within a fast-paced and highly ambiguous business environment.LANGUAGE SKILLSAbility to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.MATHEMATICAL SKILLSAbility to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.REASONING ABILITYAbility to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC’s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time.WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual’s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate. Required PPE for the production area includes composite toed shoes, hearing protection, protective eyewear, and an ESD vest. The manufacturing floor is modernized, climate-controlled, and well-lit.COMPANY BENEFITSMedical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options401K matchEmployee Stock Purchase PlanPaid Time OffTuition ReimbursementLife, AD&D, and Disability InsuranceCommuter BenefitsEmployee Assistance ProgramPet InsuranceAdoption AssistanceAnnual Merit IncreasesCommunity Volunteer OpportunitiesBE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.#whereyoubelong#AWorldofPossibilities

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThis role will primarily function as the Plant Vibration Subject Matter Expert (SME). Implement vibration analysis technics using data-driven decision making from vibration monitoring equipment and systems to support informed decision making in the evaluation of equipment anomalies. Lead and coordinate corrective action planning and implementation with Equipment Service departments before equipment failure. Promote continuous improvement by regularly reviewing and updating our maintenance strategies based on the latest industry standards and technological advancements.Key AccountabilitiesUtilize vibration condition monitoring technologies to ensure safety, optimal equipment reliability, performance, and availability.Implement and execute equipment vibration routes in conjunction with monitoring of wireless sensor systems to identify vibration anomalies.Collection and analyzing of vibration data to predict potential failures.Perform detailed fault diagnoses to identify specific issues or concerns with equipment and escalate corrective actions.Preparation of detailed reports and documentation of findings, including recommendations and schedule support for equipment service repairs.Provide training and technical guidance to Reliability Engineering team members.Support Equipment Service and Engineering teams to implement vibration control solutions to improve equipment characteristics and availability.Engage and support Plant Reliability Business plans.Qualifications, Experience, and SkillsBachelors/Associates Degree in Engineering (Industrial Equipment, Electrical or Mechanical Engineering) and/or equivalent minimum experience2-8 years experience based on education, preferred Reliability/ Equipment Engineering or Equipment Service experienceVibration Category II Certification preferred, Manufacturing Equipment Condition Monitoring experience. Proficient in Microsoft Office productsWorking ConditionsFast pace and at times high stress environmentShift may change with business needsOvertime as required, include working weekends, holidays, and plant shutdownsSome travel, domestic and international with notice (2-3%)Standing, sitting, bending, climbing, and walking on a consistent basisWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Come join our team as a CAD Designer! The CAD Designer I is critical to the organization through using CAD software to provide support and produce accurate and detailed information in a timely manner to enable first time quality for clients. RESPONSIBILITIES Software / CAD Produce plumbing and mechanical designs based on client and company specifications using CAD software Produce dimensioned plans for single family projects to be used by field teams for construction Project Design Comprehensively create material lists of all necessary materials for each designIdentify plumbing needs for different fixtures being used in the design and accurately placing drains for these fixturesConsistently place fixture drain and water line points in locations per RTM Standard practicesAccurately place HVAC diffusers and equipment Information Gathering Carefully review and understand builder documents associated with each project and correctly interpret builder options to accurately complete designsUnderstand plumbing and HVAC code requirements to ensure designs are code compliant Communication Clearly communicate with other trades, architects, general contractors, field engineers, project managers, field staff, and relevant internal departments such as estimating, to ensure applicable information is captured and all individuals are kept abreast of project progressCorrectly use project management software to coordinate with internal team QUALIFICATIONS Clear, effective communications skills – both written and verbalGood ability to collaborate and incorporate multiple perspectives into work productAptitude for prioritizing and problem-solvingPreference for accuracy, attention to detail, and organizationMastery of entire Microsoft Suite plus Internet and emailExperienced in AutoCAD or other related softwareAbility to utilize Autodesk Design Review and Bluebeam softwareA high school diploma or GED is required, Associate or Bachelor degree preferred 2 years CAD design software experienceBasic construction knowledge required SCHEDULE: Monday to Friday LOCATION: On-site, Indianapolis location BENEFITS MedicalDentalVisionShort- & long-term disabilityAccrued PTOPaid holidays401(K)Profit sharingWeekly pay, 401K, Medical, Dental, and VisionIndoor office settingModerately noisy environment with light traffic, office equipment, and guest entrance It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore Check us out at www.rtmoore.com to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity EmployerEducationPreferredBachelors or better in Design and Mechanical Systems or related fieldEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Job Description: Maintenance Technician"To become the world’s greatest baker, we need the world’s greatest team members!"What FGF Offers:FGF believes in Home Grown Talent, accelerated career growth with leadership training, unleashing your potentialCompetitive Compensation, Health & Welfare Benefits including Vision & Dental and flexible options at competitive premiums401k matching programDiscount program - Restaurants, gyms, shopping, etc.Tuition reimbursementOverview:FGF Brands is growing and we need more talented Mechanics to join our growing team!As a team member, the Manufacturing Mechanicmaintains, troubleshoots, and repairs high-volume food manufacturing equipment. They prioritize personnel and food safety at all times.Starting Wage = $34.75/hour + performance raises + $1/hour shift differential for hours worked between 6:00pm and 6:00am.Location: Brownsburg, INSchedules Available:Nights 6:00pm-6:00am; +20% built in overtime (48 hour weeks)Days 6:00am-6:00pm; +20% built in overtime (48 hour weeks)ResponsibilitiesRespond and react to mechanical issues in the production environment in a timely and efficient manner.Complete maintenance projects - PM tasks and work orders as assigned.Read electrical schematics and mechanical diagrams.Write parts requests, complete work orders, and write corrective work ordersFollow all Good Manufacturing Practices (GMPs).Keep a clean work areaPerform building inspections and routinesCommunicate with other team membersPerform Lock-Out-Tag-Out when necessaryRequirementsMinimum 4 years work experience in a maintenance mechanic environment.Must have strong mechanical and troubleshooting skills.Must have a basic understanding of AC/DC motors, motor control circuits, and photoeyes / sensors, etc.Knowledge of conveyance a strong plus.Must be computer literate.Familiarity with CMMS work order systemsFood manufacturing background a plus with an understanding of FDA requirementsMust have good attention to detail. Ability to understand verbal and written instructions.Should be able to understand blueprints and drawingsMust be able to work independently with minimum supervisionMust be able to work at heights from ladders or scissor liftsMust be able to make decisionsShould have a working knowledge of the following:Welding, Machining, Plumbing, Pipefitting, ElectricityMust be able to work around very strong magnetsMust be able to speak, read, and write EnglishWhat is the recipe for a great career at FGF Working at FGF Brands, there is never a dull moment! FGF is a leading North American bakery company with facilities across the USA and Canada with a specialized focus across all key bakery categories, including naan, muffins, croissants, donuts, cakes, artisan breads and flatbreads.As an innovative company that is continually growing there is always challenging yet rewarding work to be a part of. We have an entrepreneurial spirit that encourages all our Team Members to use their own creativity and out-of-the-box thinking to come up with solutions and new ideas.#LI-CG1#LI-Onsite#Appcast5-10 Job Family: Maintenance Job Level: B-MFG

Come join our team as a Design Engineer! The position of Design Engineer is critical to providing high quality HVAC, Plumbing system designs and construction drawings that maximize installation efficiency and provide long-term value to our customers. RESPONSIBILITIES Design of plumbing systems in Multi-family, Single Family, and light commercial buildingsStorm sizingSanitary sizingDomestic water sizingGas pipe SizingHVAC systems design in Multi-family, Single Family, and light commercial buildings Designing and selection of HVAC equipmentCalculate project heating, cooling, and ventilation loadsMechanical ventilation calculationsEffectively design using applicable code requirements that effect HVAC and Plumbing SystemsCoordinate Plumbing and HVAC system design with other design disciplines throughout design and construction phase of the projectMaintain and communicate mechanical design through production of construction documents utilizing Revit and AutoCADEffectively communicate with RTMC customers to understand their requirements and intentProactively keep customers advised on project progress Work cooperatively in a positive, professional manner with in-house design team members as well as interface with other engineering disciplines, architects, owners, and customers. Maintain accurate mechanical and plumbing documents during construction process and effectively communicate all changes to field personnelAttend design and coordination meetings as well as perform site and field inspections QUALIFICATIONS Ability to work cooperatively in a positive, professional manner with in-house design staff as well as interface with other engineering disciplines, architects, owners, and clients.Strong work ethic and a drive to exceed client expectations.Proactive and assertive in problem solving. Experience managing parallel assignments and competing priorities.Aptitude to problem solve given resources and knowledge base within the companyAbility to meet fast-paced deadlines while maintaining a high precision quality design.Strong experience preparing construction documents using discipline specific software (i.e., Revit, AutoCAD, RHVAC or Trane Trace, etc.). Full production modeling is not required.Good written, oral communications, staff management and client relationship skills.Ability to enter data accurately and efficiently Punctual and reliable with ability to focus and attend to details when necessary Proficient in using basic office equipmentMastery of entire Microsoft Suite plus Internet and emailAbility to investigate, gather information, and be self-sufficient and organized Bachelor’s Degree in Mechanical Engineering (or similar degree)3-5 years relevant experience in HVAC and/or Plumbing Design preferred Professional Engineering (PE) License preferred, but not required SCHEDULE: Monday to Friday LOCATION: On-site SALARY/HOURLY RATE: Salary Exempt BENEFITS MedicalDentalVisionShort- & long-term disabilityAccrued PTOPaid holidays401(K)Profit sharingWeekly pay, 401K, Medical, Dental, and VisionIndoor office settingModerately noisy environment with light traffic, office equipment, and guest entrance It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore Check us out at www.rtmoore.com to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity EmployerEducationRequiredHigh School or betterEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking a Traveling Associate Dentist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Take care of your community while participating in activities to promote a positive image of the company! Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Traveling Associate Dentists are responsible for providing dental services to patients with the support of their team. Hold staff to the highest integrity by adhering to all government regulations, company standards, and company compliance programs. Other duties as assigned Our practice has: DentaPro software Digital x-ray and Panorex units Fiber-optic handpieces Yearly OSHA and HIPPA and Emergency Management training Ratio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per provider Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location) Office flow: average 10-12 operative patients and 20-25 hygiene patients State insurance plans, PPO and out-of-network payor mix Qualifications:We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, DEA, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults This opportunity provides: Traveling to other offices within your geographic area - all expenses paid (hotel, mileage, meals) Growth and development through mentoring and collaboration Attractive sign-on bonuses and student loan repayment assistance up to $1000/month may be offered for specific locations What we offer: Guaranteed base pay in excess of 285k with uncapped earning potential Guaranteed daily rate of up to $1200 per day Sign on bonus up to $100,000 Guaranteed biweekly salary during ramp period OR a percentage of collections No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan with Company match Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.