RWE Clean Energy, LLCTo start as soon as possible, full time, permanentFunctional area: Operations & MaintenanceRemuneration: Non-ExemptAs aBlade Repair Services Technician Associate, you will be part of an internal blade repairs service team, a critical team that repairs, maintains, and inspects blades, lowering lost production time. RWE represents change, innovation, and sustainability. As one of the world’s leading electricity generators from renewable energy sources, we aim to be carbon-neutral by 2040 and to enable a sustainable life for people worldwide. To achieve this, we seek dynamic and motivated people to join us in creating a sustainable and secure energy future.Responsibilities:Adhere to the company’s values and behaviors as defined by the ONE RWE philosophyAssure that all operation and maintenance activities are performed safely and consistently with policies and procedures. This includes wearing essential safety equipment, including a personal fall arrest system, and identifying potential hazards on the jobClimb wind towers and access wind turbines to perform composite repair & maintenance tasksLift, carry, and transport essential equipment, tools, and materials to the job siteAssist in transportation, setup, and the operation of the up-tower blade access mechanismSupport a team performing platform and ground access composite repairs on multiple turbine manufacturers, including GE, Siemens, Vestas, Nordex, etc.Assist in the mobilization of all repair equipment to the siteAssist in major component replacement, which will primarily focus on bladesAssure proper storage, maintenance, and handling of all Blade Repair Service equipmentWhen assigned, perform safety and other wind farm-related tasks and act as a backup to personnel at other RWE sites when necessaryOther duties and responsibilities as assigned by the managerQualifications:High School Diploma or equivalent requiredAn associate degree in science or a related field from an accredited school is preferredA minimum of 2 years of work experience in operations and maintenance of power generation, blade repair, transmission, and distribution. Preference will be given to the candidate with some renewable energy experience, preferably in windExperience in project development or adjacent areas within the power sector is an advantage (e.g., market analysis, transmission & interconnection, PPA marketing, electrical engineering, environmental analysis, M&A)Structured and organized, able to manage multiple projects at the same timeStrong problem-solving abilities, interpersonal skills, attention to detail and work ethicAll applicants must pass physical fitness tests to maintain Global Wind Organization Certification. In addition, at the discretion of the business, future successful completion of physical fitness tests will be requiredAll applicants must possess an unrestricted driver’s license in good standingWilling to relocate to within 1 hour drive of the siteWilling and able to obtain and maintain an RWE-sponsored Commercial Driver License (CDL), if so requested by RWE, for mobilization of our composite component repair equipmentPreferred: GWO CertificationUnderstanding of wind turbine blade construction, inspection, and repair,including LPS systemsKnowledge of fiberglass typesDemonstrated experience in blade damage assessment and repair.Experience across multiple manufacturers (i.e. Siemens, GE, Vestas, Nordex)Previous Blade Access Platform and rigging experience preferred.Experience of LEPUnderstanding of composite materials, including (but not limited to), epoxyresins, polyurethane fillers and paint, core materials, and mix ratiosAccurate completion of QA/QC documentationAbility to read and understand Engineering Work InstructionsMust be able to maintain a personal weight limitation of 270 lbsMust be able to climb wind towers on a daily basis. During this task, employees must be able to open/close hatch doors and identify potential safety hazardsMust be able to balance to (1) work in closed and small swaying areas on top of and within wind towers and (2) walk across small surface areas to access areas within wind turbines Ability to push/pull/lift tools and equipment weighing up to 50 lbsAbility to work safely in extreme environments (hot sun, cold, etc.)Ability to walk, climb, and stand extensively during the work dayKnowledge of and experience with the use of hand and power toolsKnowledge of environmental and safety policies and proceduresAbility to work within tight deadlinesAbility to multi-task while working independently and as part of a teamAbility and willingness to travel to and from job sites as assignedProficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook) and TeamsMotivated self-starter, goal-oriented, and strong problem-solving abilitiesIdentify energy isolation points and implement LOTO for protectionKnowledge of computer network communication protocol and theory of operation is desiredAbility to understand and communicate root causes requiredGood communication skills and must value being part of a teamSafety- Promote safety for all at all timesInitiative - Able to work with minimum supervision and make decisions for all issues related to his/her discipline(s) with limited and/or available informationWORK ENVIRONMENT:This position is a site-based role that involves occasional travel. Must possess the ability to climb wind towers regularly. It involves the capability to manipulate hatch doors and recognize potential safety risks. Additionally, the individual should be able to crouch, kneel, or half-kneel for intervals of up to five minutes to execute maintenance duties in low areas. Travel up to 75%, multiple worksites, hot/cold weather conditions, irregular hours on short notice.Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Eligible employees also participate in short-term incentives, in addition to salary.Apply with just a few clicks: ad code 87755We look forward to meeting you. Of course, you can find us on LinkedIn, Instagram, Facebook, YouTube and Xing, too.We are an Equal Opportunity Employer. No matter who you are, we welcome your application irrespective of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.RWE Clean Energy is one of the biggest names in the US renewables industry – and No.2 in solar. With a 1,500-strong team, the business has over 15 years’ experience of developing, constructing and operating renewable energy facilities, and ambitious plans for the future.As part of the RWE Group’s Growing Green strategy to expand globally its green portfolio to more than 65 GW of installed capacity and to invest globally more than EUR 55 billion gross by 2030, RWE Clean Energy is determined to significantly increase its operating asset base in the U.S. This is backed by a project pipeline of more than 24 GW in onshore wind, solar and battery storage which provides for one of the largest development platforms in the United States.Every project brings constantly-evolving technical, practical and social challenges – and drives a culture where everybody thrives, has fun and feels excited by each day. Our financial stability also means you’ll have the freedom to act with conviction and courage as we pivot to new technologies – and continuously improve, together.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Pay: $60,000 - $120,000+Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.#ABTMATLBenefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

Req ID:443772Address: 1875 Campbell Crossing Tipton, IN, 46072Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Apprentices work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Are you mechanically inclined with no professional experience No problem! We will teach you! In the apprentice program, you can expect to learn:Electrical diagnostics and repairsAir conditioning & heating diagnostics and repairsWheel end assembly diagnostics and repairsAir system diagnostics and repairsAir brakes diagnostics and repairsCharging system diagnostics and repairsBasic computer diagnostics and auxiliary component replacementParts lookup and acquisition Job Functions: Assist customers with roadside servicesLearn preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Utility Worker to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be assisting with maintaining the location building and equipment systems by performing; basic maintenance and plant utility functions, loading and unloading deliveries, painting, operating industrial equipment, and plant cleaning / blowdowns. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: Utilize equipment to perform plant cleaning operations, this includes,: floor scrubbers, lint and dust removal devices, outside rubbish removal, equipment cleaning, and pit / trench screen cleaning.Perform miscellaneous painting tasks throughout the plant or outside on facility grounds.Operate powered industrial forklifts / lifts throughout the facility to assist in relocating materials.Assist in loading and unloading trucksAssist with production receiving activities.Perform various levels of facilities upkeep including landscaping, snow removal, and other removal operations.Perform light equipment maintenance tasks, trench screen cleaning, lint and dust blowdown of facilities and equipment, fluid level checks, light bulb replacement, ceiling tile replacement, cart cleaning and repair, and pressure washing after appropriate training from UniFirst.Upon proper training and certification, may be called upon to operate Company vehicles such as shuttle trucks or route trucks.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for:High school education and/or GED equivalent is preferred.At least 2 years of relevant experience is preferred.Must be 21 years of age or olderValid driver's license and a safe driving record are required.Ability to work independently with little or no supervision.Must be able to operate powered industrial equipment (forklifts, floor scrubbers, scissor lifts) and other similar tools as required.Experience using basic hand and power tools is required.Ability to read, comprehend and interpret procedures and instructions in English.Ability to effectively present information and respond to questions from co-workers and managers.Ability to work overtime as needed is required.Ability to lift up to 80 lbs.About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization.UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!What you will doA Johnson Controls Service Technician is a troubleshooter and service expert. You will alleviate concerns the customer may have regarding a security system. You will advise customers and the customer care center of the status of systems and processes inspections. You will repair or replace burglar alarms, fire alarms, CCTV systems, Card Access systems and other security equipment. This Technician will be set up with all of the tools and equipment needed to work independently.How you will do itAs a Commercial Service Technician you will locate and alleviate trouble with damaged equipment or wiring; readjust equipment, repair or replace inoperative equipment and test for operation; prepare trouble order forms to report temporary repairs.What we look for RequiredMinimum of 3-5 years documented experience in low voltage electrical systems which may include any of the following - Burglar Alarm, Card Access, and CCTV.High School Diploma or equivalent required.Strong Ability to use phone-based apps to perform daily duties and tasksExperience in operational/product manuals.Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.Participate in a scheduled On-call rotation.Demonstrate a high level of customer service, strong organizational skills, positive attitude, and an ability to learn quickly.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, crawl spaces, above ceilings, etc.Possess a valid driver’s license and driving record that meets company requirements.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Able to pass a pre-employment background and drug test.PreferredProject Management will be an optional requirement.Experience with Software House, American Dynamics,Bosch, DMP, and other Enterprise Level Access Control systems,CCTVand IP video systems.Associate degreepreferred or equivalent work experience. NICET Level I, II, or III is a strong asset.#TechHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Requirements: Candidate must have experience and knowledge of working with Industrial Molding Machinery. *This is NOT a maintenance position for Apartment building, landscaping, nor housing repairs. Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: Be able to work 12-hour shifts, 8a-8p or 8p-8am, rotating: 36 hours one week, 48 hours the next. Ability to work overtime when needed.While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Indianapolis metro area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#MP

Ready to build a career with a company that’s leading the foodservice industry We help you make it!Pay: Starting at $22/hr Schedule: 10am - 8pm Mon-ThursThe Produce Inspector II performs daily inspections of all incoming deliveries and existing produce inventories to ensure product meets established quality specifications. The Inspector will make the decision to accept or reject produce based on processes consistent with PACA laws, driving customer satisfaction and minimizing returns.ESSENTIAL DUTIES AND RESPONSIBILITIES Ensure produce quality that is received from supplier, stored in the warehouse, and shipped to our customers meets the specifications set by US FoodsPerform daily inspections of all incoming fresh produce deliveries and the inspection of all fresh produce in inventory within our coolersMake decision to reject or accept fresh produce at receiving and ensure appropriate processes are followed that are consistent with PACA laws when a rejection is necessaryMake decision to withdraw produce from inventory that does not meet the specifications set by US FoodsWork directly in conjunction with warehouse management to identify and address food safety concerns. Maintain records of inspectionsCollaborate with replenishment lead on dumps, damages and produce re-work decisionsCommunicate daily with the replenishment lead and warehouse manager on all issues related to fresh produce. Make recommendations on dump and damage or repackagingVerify Purchase Order quantities and inspect quality for all inbound perishable loadsInspect all inbound trucks for signs of pest and rodents before unloadingEnsure compliance with all Standard Operating Procedures pertaining to receiving, storage, and shipping of fresh produce. Identify any issues to warehouse managementDocument temperatures of all inbound loads and report to warehouse manager and replenishment lead any violationsResponsible for checking for proper rotation of all produce inventory and perform daily quality inspections for all fresh produce items in inventoryPerform daily date checks and pull all outdated fresh produce from pick and reserve slotsComplete daily dump and damage report and give to warehouse supervisor or inventory controlOther duties as assigned.RELATIONSHIPSInternal: Interact with Replenishment Lead, Drivers, Selectors, OperationsExternal:Interact with Vendors, Suppliers, Third Party Consultants and Regulatory BodiesQUALIFICATIONS Education/Training:High School Diploma or GED requiredMin 2 years experience in produce or other perishable receiving and inspection requiredRelated Experience/Requirements:Working knowledge of USDA Specs, Grades and Standards RequiredWorking knowledge of PACA laws requiredTechnical proficiency in Microsoft Office and other relevant applications/hardwareCompletion of US Foods Produce Inspector Course (within 60 days of hire)Ability to lift 50 lbsAbility to sit and stand for long periods of timeTeam-player – flexible and willing to learn new things and adapt as the business evolves***EOE Race/Color/Religion/Sex/National Origin/Protected Veteran/Disability Status***

Performs maintenance and handyman services in our Kohl's stores ensuring Company Brand Standards are maintained. Performs all work in a quality manner following all safety rules and regulations. Responsible for meeting budgets and communicating effectively with both internal and external customers.ACCOUNTABILITIESGENERAL MAINTENANCE Responsible for timely and accurate completion of work orders as assigned by supervisor Ensures all necessary material and tools to perform daily work are available and kept in good condition (Kohl’s provides all needed tools) Performs Interior Store Repair and Maintenance as assigned by Territory Facilities Manager with a focus on Door (interior and exterior) and Plumbing (faucet, toilet, hot water heater, etc.) repair Performs Interior Lighting and Electrical repairs including but not limited tolamp/ballast replacement, minor outlet repairs, once per year 90 minute emergency light testing and repairs, etc. Pro cient in other Interior Repair and Maintenance items including but not limited to ooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, xture, and stroller/ cart, and cleaning equipment repairs Performs exterior maintenance of building including but not limited to low elevation (can be reached with a 12ft ladder), building painting, curb/ramp painting,power-washing, and minor Common Area Maintenance repairs of landscaping, signage, and concrete/asphaltIDENTIFY MAINTENANCE ISSUESAssists stores with Housekeeping problem solving with suggested solutions for Store Associate teams and Contract Cleaning providers to increase CLEAN presence in stores. Communicates safety and cleanliness issues and action plans to resolve with Store Management and Territory Facilities Manager Identi es Interior and Exterior maintenance issues that need resolution by exterior vendors and enters those issues into Web Based Facilities Management program for assignment and completion Communicates recaps regularly to Territory Facilities Manager and/or Store and District Managers of stores visited, wins/opportunities found, as well as issues resolved on store visits. Communication may be verbal or emailQUALIFICATIONSREQUIRED Ability to work independently without direct face to face Ability to effectively communicate with multiple levels in Store organization verbally and written Pro cient in Microsoft Word, Excel, navigation of websites and able to utilize new computer systems, including smartphones 2-4 years of prior maintenance work with a strong focus in Door, Plumbing, Electrical / Lighting, and Handyman Services Prior retail or o ce building maintenance experience Familiar with General Maintenance tools and tasksPREFERREDAbility to repair a variety of other interior/exterior issues as assigned by Supervisor including equipment and CAM itemsSPECIAL Moderate lifting – 25 to 50lbs on a regular basis Ability to travel up to 100% of the time with some overnight stays based on store schedule/location Ability to climb/work on ladders up to 12ft in height in order to address lighting, painting, etc. issues Valid driver’s license with a currently registered vehicle

RWE Clean Energy, LLCTo start as soon as possible, full time, permanentFunctional area: Operations & MaintenanceRemuneration: Non-ExemptAs aBlade Repair Services Technician II, you will be part of an internal blade repairs service team, a critical team that repairs, maintains, and inspects blades, lowering lost production time. RWE represents change, innovation, and sustainability. As one of the world’s leading electricity generators from renewable energy sources, we aim to be carbon-neutral by 2040 and to enable a sustainable life for people worldwide. To achieve this, we seek dynamic and motivated people to join us in creating a sustainable and secure energy future.Responsibilities:Adhere to the company’s values and behaviors as defined by the ONE RWE philosophyAssure that all operation and maintenance activities are performed safely and consistently with policies and procedures. This includes wearing essential safety equipment, including a personal fall arrest system, and identifying potential hazards on the jobClimb wind towers and access wind turbines to perform composite repair & maintenance tasksLift, carry, and transport essential equipment, tools, and materials to the job siteAssist in transportation, setup, and the operation of the up-tower blade access mechanismSupport a team performing platform and ground access composite repairs on multiple turbine manufacturers, including GE, Siemens, Vestas, Nordex, etc.Assist in the mobilization of all repair equipment to the siteAssist in major component replacement, which will primarily focus on bladesAssure proper storage, maintenance, and handling of all Blade Repair Service equipmentWhen assigned, perform safety and other wind farm-related tasks and act as a backup to personnel at other RWE sites when necessaryOther duties and responsibilities as assigned by the managerQualifications:High School Diploma or equivalent requiredAn associate degree in science or a related field from an accredited school is preferredA minimum of 4years of work experience in operations and maintenance of power generation, blade repair, transmission, and distribution. Preference will be given to the candidate with some renewable energy experience, preferably in windExperience in project development or adjacent areas within the power sector is an advantage (e.g., market analysis, transmission & interconnection, PPA marketing, electrical engineering, environmental analysis, M&A)Structured and organized, able to manage multiple projects at the same timeStrong problem-solving abilities, interpersonal skills, attention to detail and work ethicAll applicants must pass physical fitness tests to maintain Global Wind Organization Certification. In addition, at the discretion of the business, future successful completion of physical fitness tests will be requiredAll applicants must possess an unrestricted driver’s license in good standingWilling to relocate to within 1 hour drive of the siteWilling and able to obtain and maintain an RWE-sponsored Commercial Driver License (CDL), if so requested by RWE, for mobilization of our composite component repair equipmentPreferred: GWO CertificationUnderstanding of wind turbine blade construction, inspection, and repair,including LPS systemsKnowledge of fiberglass typesDemonstrated experience in blade damage assessment and repair.Experience across multiple manufacturers (i.e. Siemens, GE, Vestas, Nordex)Previous Blade Access Platform and rigging experience preferred.Experience of LEPUnderstanding of composite materials, including (but not limited to), epoxyresins, polyurethane fillers and paint, core materials, and mix ratiosAccurate completion of QA/QC documentationAbility to read and understand Engineering Work InstructionsMust be able to maintain a personal weight limitation of 270 lbsMust be able to climb wind towers on a daily basis. During this task, employees must be able to open/close hatch doors and identify potential safety hazardsMust be able to balance to (1) work in closed and small swaying areas on top of and within wind towers and (2) walk across small surface areas to access areas within wind turbines Ability to push/pull/lift tools and equipment weighing up to 50 lbsAbility to work safely in extreme environments (hot sun, cold, etc.)Ability to walk, climb, and stand extensively during the work dayKnowledge of and experience with the use of hand and power toolsKnowledge of environmental and safety policies and proceduresAbility to work within tight deadlinesAbility to multi-task while working independently and as part of a teamAbility and willingness to travel to and from job sites as assignedProficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook) and TeamsMotivated self-starter, goal-oriented, and strong problem-solving abilitiesIdentify energy isolation points and implement LOTO for protectionKnowledge of computer network communication protocol and theory of operation is desiredAbility to understand and communicate root causes requiredGood communication skills and must value being part of a teamSafety- Promote safety for all at all timesInitiative - Able to work with minimum supervision and make decisions for all issues related to his/her discipline(s) with limited and/or available informationWORK ENVIRONMENT:This position is a site-based role that involves occasional travel. Must possess the ability to climb wind towers regularly. It involves the capability to manipulate hatch doors and recognize potential safety risks. Additionally, the individual should be able to crouch, kneel, or half-kneel for intervals of up to five minutes to execute maintenance duties in low areas. Travel up to 75%, multiple worksites, hot/cold weather conditions, irregular hours on short notice.Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. Eligible employees also participate in short-term incentives, in addition to salary.Apply with just a few clicks: ad code 87756We look forward to meeting you. Of course, you can find us on LinkedIn, Instagram, Facebook, YouTube and Xing, too.We are an Equal Opportunity Employer. No matter who you are, we welcome your application irrespective of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.RWE Clean Energy is one of the biggest names in the US renewables industry – and No.2 in solar. With a 1,500-strong team, the business has over 15 years’ experience of developing, constructing and operating renewable energy facilities, and ambitious plans for the future.As part of the RWE Group’s Growing Green strategy to expand globally its green portfolio to more than 65 GW of installed capacity and to invest globally more than EUR 55 billion gross by 2030, RWE Clean Energy is determined to significantly increase its operating asset base in the U.S. This is backed by a project pipeline of more than 24 GW in onshore wind, solar and battery storage which provides for one of the largest development platforms in the United States.Every project brings constantly-evolving technical, practical and social challenges – and drives a culture where everybody thrives, has fun and feels excited by each day. Our financial stability also means you’ll have the freedom to act with conviction and courage as we pivot to new technologies – and continuously improve, together.

Req ID:443728Address: 1875 Campbell Crossing Tipton, IN, 46072Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Requirements: Candidate must have experience and knowledge of working with Industrial Molding Machinery. *This is NOT a maintenance position for Apartment building, landscaping, nor housing repairs. Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: Be able to work 12-hour shifts, 8a-8p or 8p-8am, rotating: 36 hours one week, 48 hours the next. Ability to work overtime when needed.While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns.Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for:High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Valid driver’s license and a safe driving record are required. Knowledgeable in maintenance equipment.Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment test to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Indianapolis metro area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#MP

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonus planPaid vacation/holidays/sick time - 15 days (about 2 weeks) of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities with outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, Tools and Equipment to complete all jobsCheck us out! A Day in the Life at JCIWhat you will doResponsible for leading and developing the long-range planning of the Engineering Team to support the broader offerings which JCI is bringing to our customers. These offerings are part of our growth strategies and would include Corporate Clients, Design Build, Fire & Security, Integration Solutions and Vertical Market Solutions. Employs practices and develops processes to ensure cost effective engineering while providing consistent delivery and customer satisfaction. Teams effectively with corporate, project field teams, sales teams, and Area Management.How you will do itDevelop Engineering Team strategic business plan consistent with Systems & Services' account management plans, mission, and objectives. Understands the business environment of area markets and works with the Area Management Team to support this.Develops strategies to deliver the "JCI Way" of field-tested standard applications that are reusable, installable, and serviceable.Works with Sales to develop relationships with our customers that will help us penetrate the Design Build Market.Reviews with Sales Management the upcoming sales forecasts to make sure that the Engineering Team has the right quantity and ability of resources to effectively support the future work.Manages and schedules the workload of the engineering team. Prioritizes work, supervises, and coordinates projects to ensure progress and timely completion of the engineering portion. Provide timeframe estimates to project management for job cost evaluation.Develops, implements, monitors, and communicates the Engineering team processes, strategies and standards. Provides engineering input to assure proper project costs at pre-bid and upon project completion.Works with and understands financial, contract management and other management reports.Maintains high level of engineering standards. Ensures maximum reuse of designs and programs. Develops and maintains the area standard systems engineering library.Mentors and coordinates the development of team members. Develops team employees through implementation of their personal development plans, goal setting and timely performance reviews.Develops standards for material procurement. Establishes and maintains, with the cooperation of the Estimator, the Area's standard subset of materials.Works with field installation teams to ensure timely delivery of contracted engineering to maximize execution.Adheres to safety standards. High degree of regard to employee and subcontractor safetyWhat we look forRequiredBachelor's degree in engineering, with 8-10 years of progressively more responsibility in the construction industry.Prior experience in supervision of a technical/engineering group.Understands accounting principles and cost management.Good oral and written communication skills, especially in the presentation of technical material.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Requirements: Candidate must have experience and knowledge of working with Industrial Molding Machinery. *This is NOT a maintenance position for Apartment building, landscaping, nor housing repairs. Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: Be able to work 12-hour shifts, 8a-8p or 8p-8am, rotating: 36 hours one week, 48 hours the next. Ability to work overtime when needed.While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation, is immediately hiring Outside Sales Representatives in the Indianapolis metro area!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed operational departments for every stage of the job process, giving Outside Sales Representatives more time in their day to sell and not get bogged down with project management. We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years! Outside Sales Representatives are instrumental in that growth!Compensation & Benefits for Outside Sales RepresentativesPerformance Based Pay (based on activities)Commission on approved sales$62,400 - $266,000 / year (expected yearly earnings)Vehicle allowance (for qualifying vehicles)Quarterly BonusFull Insurance Benefits401K with 4% Employer MatchCompany Paid TripsOffice Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience preferred not requiredMust have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge a plus not requiredPrevious experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#MP

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary.Paid vacation/holidays/sick-time &15 days of vacation first year.Comprehensive benefits package including 401K, medical, dental, vision care and more -Available day one.Extensive product and on the job/cross training opportunitieswith outstanding resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Check us Out:A Day in a Life at Johnson Controls:What you will doWith direction from the supervising manager,sells Johnson ControlsMechanical Design-Buildofferings persuasively, persistently, and expertly to building owners at the D-level while reaching efficient profit levels.Focuses on improving the existing building to allow the building owner to achieve business objectives. Manages ongoing opportunities particularly focusing on sellingmechanicalretrofits.Builds partnering relationships with the owner or owner representatives responsible for the decision-making process to drive the sale of Johnson Controls offerings. How You Will Do ItActively listens, probes, and identifies concerns. Understands the customer's business and speaks their language. Seeks out, targets and initiates contact with multiple prospective customers.Keeps manager informed of sales progress and changes in the marketplace. Develops and maintains a network of contacts. Understands and leverages the sales process as well as demonstrates evidence of gaining small trial closes.Shares technical knowledge plus operations expertise (when to maintain, when to replace) with the customer. Addresses customer's operational and environmental objectives, needs and requirements. Recommends solutions and links customer objectives to total value solution and competitive advantage. Positively and credibly influencesasset renewalstrategies with owners. Frequently creates competitive, high quality and timely estimates, proposals, and cost/benefit analysis.Effectively writes and presents proposals. Verifies each new proposal with supervising manager prior to presenting it to the customer. With support from the supervising manager negotiates value, addresses resistance, and closes the sale. Utilizes applicable sales tools effectively (Salesforce, Account Management, Account Plan and TAS) to plan and document progress as well as increase business opportunity in accounts. Manages the high activity of the pipeline inSalesforcewith a focus on sales phase, close date, and probability of a close as well as other pertinent information. Solicits support from and communicates effectively with internal staff to ensure customer satisfaction. Develops relationshipwith all JCIsalesteamsto exceed customers' expectations. Acts as the customer’s advocate in interactions with Johnson Controls to ensure the customer obtains the best value from Johnson Controls’ offerings. Sets appropriate customer expectations on Johnson Controls product and service offerings. Participates in final project inspection with the supervising manager. Attends and presents at trade shows and participates in professional organizations.What we look forRequiredUniversity degreeor equivalent combination of education and experience. Six (6) years minimum experience.Five (5) years of experience in field sales with at least 3 years selling HVACmechanical design-build retrofits.Demonstrated commitment to integrity and quality in business.Strong interpersonal communication and collaborative skills.Demonstrated ability to influence the market at key levelsPreferredKnowledge and/or experience sellingapplied equipment retrofit solutionsis highly desirable.Bachelor's degree in business, engineering, or related discipline; MBA preferred.Eight (8) years progressively responsible field sales experience; 3 years selling HVAC.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Requirements: Candidate must have experience and knowledge of working with Industrial Molding Machinery. *This is NOT a maintenance position for Apartment building, landscaping, nor housing repairs. Responsibilities: Performs routine preventive maintenance checks on all production equipment and machinery.Replaces or repairs parts on machines such as bearings, filters, wiring, valves, gauges and switches and other electrical parts and equipment.Observes and listens to mechanical devices in operation to locate causes of trouble.Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections.Inspects used parts to determine changes in dimensional requirements.Adjusts functional parts of devices and control instruments. Repairs or replaces defective parts. Installs special functional and structural parts in devices.Initiates purchase order for parts and machines, lubricates, and cleans parts, start devices to test their performance.Participates in on-call program and may be required to work additional hours as required.Follows all safety rules and procedures and observes the operations to ensure a safe environment. Requirements: At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.At minimum of 3-5 years' experience of Mechanical skillset required, working with industrial machinery.Prefer Electrician's License, but not mandatory. Job Knowledge, Skills, and Abilities: Machine set-up, troubleshoots equipment failures, and perform repair and prevent maintenance services ensuring that all safety procedures are being followed.Must have strong PLC troubleshooting capability and ability to read and program code.Must have good working knowledge of all aspects of electrical controls, mechanical assembly, plumbing, and heating, ventilating and air-conditioning related control systems.Read and interpret electrical control and mechanical assembly drawings, as well as service manuals for all equipment.Troubleshoot and repair both Electrical and Mechanical problems associated with Production and Facility equipment in a timely manner.Must be able to work to repair equipment back to service during emergency breakdowns. Competencies: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, and diagram or schedule form. Physical Demands: Be able to work 12-hour shifts, 8a-8p or 8p-8am, rotating: 36 hours one week, 48 hours the next. Ability to work overtime when needed.While performing the duties of this job, the employee is regularly required to reach with hands and arms. They employee frequently is required to stand; walk; and use hands to finger, handle, or feel.The employee is occasionally required to climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move more than 100 pounds with assistance.Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to toxic or caustic chemicals, risk of electrical shock and vibration. The noise level in the work environment is medium to loud.Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary.Paid vacation/holidays/sick time -15 days of vacation first year.Comprehensive benefits package including 401K, medical, dental, and vision care.Available day one.Extensive product and on the job/cross training opportunities.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.Company vehicle.JCI Employee discount programs (The loop by Perk Spot).What you will doUnder general direction is responsible for the sale ofJohnson ControlsBE offerings to owners at the Director and/or Vice President level. Promote theJohnson Controlsvalue proposition to building owners end users by providing business and technical solutions. Builds and leads long term customerrelationships/partnershipswith assigned accounts. Positions renewable service agreements as a foundation of managed account relationships. Drives the sales process to aid in encouraging and leading long-term relationships and in seeking out, qualifying and closing new sales opportunities.How you will do itSells, with minimal supervision, the Johnson Controls offerings persuasively, persistently and confidently to building owners at the D-level while reaching optimal profit levels.Focuses on improving the existing and new facilities to allow the building owner to achieve businessobjectives.Sells, renews and expands renewable service agreements, including multi-year agreements, to both new and existing assigned customers.Builds partnering relationships with the owner or owner representatives responsible for the decision-making process to drive the sale of Johnson Controlofferings.Addresses customer's operational and environmental objectives, needs and requirements.Recommends solutions and links customer objectives to total value solution and competitiveadvantage.Differentiates Johnson Controls services and products from competitors by applying creativity, ingenuity, and innovation in avalue-addedsalesapproach.Actively establishes a “mentee” relationship with a Sr. Account Executive within the branch to assist with their development as a professional BEsalesperson, with the goal of enhancing his or her productivity.What we look forRequiredA minimum of one year of successful field salesexperience.Minimum ofone yearsuccessfully sellingHVACor building automation system industry.PreferredBachelor’s degree in business, engineering, or related disciplinerequired.At least one year successfully selling HVAC or building automation systemindustry.Demonstrates a commitment to integrity and quality inbusiness.Excellent initiative and interpersonal communications skills.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.