Medical PhysicistRole SummaryRadiation Oncology Associates, an independently owned physician practice, is seeking a clinical Medical Physicist to join our team in Fort Wayne, Indiana. The successful candidate will have the chance to work with an Elekta Flexitron HDR unit which includes treating with cylinders, tandem and ovoids, and Syed interstitial.In addition to the Flexitron, ROA has two Varian Truebeam linacs utilizing external beam treatment which includes IMRT/VMAT, SBRT, and SRS. ROA houses a GE Discovery CT. The ideal candidate will provide services at our Fort Wayne location, located on the Lutheran Hospital Campus, in addition to our satellite location in Warsaw, Indiana, typically one day a week. This is a great opportunity for a physicist looking to work with a close-knit team of experienced physicians, physicists, dosimetrists, and therapists. ESSENTIAL DUTIES & RESPONSIBILITIES:·Assist with planning, checking, and delivery of external beam and brachytherapy radiation therapy treatments for patients. ·Perform initial and weekly chart checks of patients under treatment. ·Perform monthly and annual quality assurance checks of linear accelerators and other equipment. ·Attend the operating room for brachytherapy procedures. ·Provide consultation to physicians and dosimetrists, including BED calculations, review of contours, fusions, etc. ·Assist with planning of brachytherapy and stereotactic treatments. ·Develop procedures and software tools for the initial and continuing evaluation of radiation therapy treatment, brachytherapy, simulation, and radiation measurement equipment. ·Develop equipment specifications and assist with acceptance testing and commissioning of clinic equipment. ·Help maintain a Quality Management Program that monitors, evaluates, and optimizes radiation oncology processes. ·Perform required training and education and keep abreast of new scientific methods and technological developments in radiation therapy.·Assists with planning and participation in supporting programs (i.e., chart rounds, safety meetings, and M&M review) to ensure effective and safe use of radiation.·Assist with renewal of ACR accreditation with maintaining proper records and correspondence pertaining to quality control and quality assurance, calibration, radiation safety and compliance with State and Federal regulations and standards of accrediting bodies.·Act as a resource for all clinic staff on technology questions. ·Work after-hours as needed, to complete quality assurance tasks.QUALIFICATION REQUIREMENTS:• PhD, DMP, or master’s degree in Medical Physics• Certified by the American Board of Radiology (ABR), the American Board of Medical Physics (ABMP), or Canadian College of Physicists in Medicine (CCPM)• Board eligible candidates will be considered. Must have passed Part II ABREquipment Experience Preferred:•Aria/Eclipse with Truebeams •Elekta Flexitron HDR Unit•VisionRTBy applying for this position, you agree that any calls from Epic Staffing Group and its subsidiaries may be monitored or recorded for training and quality assurance purposes.Epic Staffing Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, housing, age, disability or genetics.We will consider all qualified applicants for employment, including those with criminal histories, in a manner consistent with the requirements of applicable federal, state, and local laws.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Salary Full-Time Function: Engineering Req ID:26163 SummaryLincoln Electric is seeking an Electrical Project Engineer to join our team at the Fort Loramie Automation site. This position plays a critical role in managing and executing the engineering processes that drive the design, development, production, and service of Lincoln Electric’s state-of-the-art automation equipment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more.What You Will Do: As an Electrical Project Engineer, you will support the design and development of Lincoln Automation equipment for automotive, aerospace, appliance and energy industries. Your key responsibilities will include:Project Leadership & Coordination: Assist in defining project timelines, resource requirements, and staffing needs. Lead cross-functional teams, ensuring timely delivery of project milestones and adherence to financial targets (labor and material costs).Engineering Design & System Integration: Work closely with mechanical, electrical, pneumatic, and hydraulic engineers to drive the design of complex automation systems. Lead the creation and troubleshooting of control systems including PLC, Safety PLC, HMI, servo motion, and robot programming.Troubleshooting & Debugging: Guide teams in the development and resolution of issues. Oversee start-up, debugging, and final system maturation to ensure systems meet customer specifications and performance standards.Budget & Cost Management: Lead the effort in maintaining project budgets, ensuring efficient use of resources and alignment with financial expectations. Work with procurement teams to identify cost-effective suppliers and establish purchasing strategies.Onsite Support & Commissioning: Manage onsite installation activities, assist with equipment commissioning, and ensure successful system integration. Resolve any customer payment issues as required upon project completion.Documentation & Standardization: Coordinate compiling operator and maintenance manuals. Assist in developing and maintaining engineering and product standards to ensure consistency and high-quality deliverables. Ensure compliance with ISO documentation standards for projects.Team Development & Mentorship: Provide guidance and mentorship to junior engineers, ensuring their technical development. Assist in team performance evaluations, fostering a collaborative, high-performance culture.Education and Experience RequiredEducation: A technical degree in Electrical Engineering or a related field is highly desired.Experience: A minimum of 10+ years of hands-on experience in industrial automation design and engineering. Proven expertise in working with PLC/HMI systems, robot programming, control systems, network & fieldbus systems, and safety systems.Experience with electrical schematic creation and design using AutoCAD Electrical (preferred).Demonstrated leadership and project management experience, including working with machine builders, management teams, and cross-functional support functions.Ability to travel ~25%Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationAnna, OhioJob PurposeThe Electrical Controls Design role provides high quality, reasonably priced, on-time hardware, software, and safety design solutions to ensure stable new model and new technology introduction in all HDMA North American manufacturing facilities.Key AccountabilitiesWork in an engineering team atmosphere understand design requirements to create/modify automated production equipment.Provide electrical design to produce engineering hardware data to assemble/build, and wire a control system for production equipmentProvide electrical design to produce engineering software data to accomplish the control task for production equipment processes. (i.e. PLC, HMI, Motion Control, and Robotic programming).Provide on-site support to install, system up, and mature the control system for production equipment.Create and maintain a critical path schedule, determine resources, and manage resources to produce the control system design deliverables to achieve the overall project milestones for medium to large projects/ medium to high complexity.Provide direct mentorship to Associate Engineers in role on a 1:1 or 1:2 ratio where technical knowledge transfer occurs to foster growth in other individual contributorsProvide Project Leadership for equipment controls design for North America new model for an entire plant or new machine. Provide Plan versus actual reporting on QCDMS requirements and propose countermeasures to gaps encountered.Lead and attend design reviews to ensure design standards are achieved and design meets specification requirements for control system design deliverables for self and project team members. (peer reviews and mentee reviews)Qualifications, Experience, and Skills4-year Bachelor of Science degree in Electrical Engineering or 2-year Electrical related degree with 4 years’ experience.2-8 years in Electrical/Controls Engineering on automated production equipment. (depends on educational background)Knowledge of machine safety regulations. Knowledge of NEC/NFPA 79 standards. Servo position control experience. Robotic integration experience. Field I/O networking experience. Project management capabilities. Basic background in automated equipment electrical hardware/software design. Knowledge of PLC and HMI hardware and software functions.Workstyle75% Office environment - Design. 25% Manufacturing floor - Debug/Install.Must be willing to conduct physical confirmations in the manufacturing environment and conduct testing/debug on the manufacturing floor and/or at vendor sitesTravel up to 20% (North American Manufacturing Plants)Average work week is 45~48 hours (some weekends and 1 week shutdowns twice per year)What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Hourly Full-Time Function: Engineering Pay Range: $30.00 - $36.00 Target Bonus: 5.0% Req ID:26270 SummaryLincoln Electric Automation has an outstanding opportunity for a Mechanical Design Engineer. The Mechanical Design Engineer plays a key role supporting our team in the design, building, shipping, and service of Lincon Electric Automation products. A Mechanical Designer II typically works on one project at a time (typically creating new designs that are very close to reference designs) and is working under the direction of a Mechanical Designer or Project Engineer.In addition to competitive pay, Lincoln Electric offers an annual incentive plan, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits!What You Will DoThe Mechanical Design Engineer will be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives with a focus on design and development. In addition you will:• Understand and gain knowledge needed to work in software systems. i.e. Solidworks • Provide mechanical layouts and details to production • Take initiative to meet challenging project timelines and budgets (hours and material) • Ensure required ISO documentation is completed • Assist in compiling electronic documentation for Service Manuals, updating design package to reflect status configuration of any critical item • Assure that product, as designed, is in conformance with quote and customer purchase order • Work well in a team environment and communication groups may include; Machine builders, Project Management, Engineering Teams, Management, and support functions • Provide small-scale mechanical layouts and detail prints to production • Assumes additional responsibilities and performs special projects in support of the Company’s 2025 Strategy • May support other roles as a cross-training opportunityEducation & Experience Requirements • Mechanical Engineer or Mechanical Engineering Technology degree required• 2 plus years of experience in manufacturing and design of industrial automated equipment desired • CAD (3D modeling) desired • Computer proficiency including spreadsheet, word processing and project softwareNonessential skills and experience: • Safety (OSHA STDS)Environmental, Health & Safety (EH&S): • Understand the Company’s EHS Policy and how it relates to this job • Be aware of OSHA & EPA laws and regulations as well as the Company’s Plant Rules and Regulations that pertain to this job • Work in a safe and environmentally friendly manner and observe all company EHS procedures • Know that the company EHS procedures are located on the ISO drive • Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures • Attend required EHS trainingPhysical demands and work environment: • Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. • Work environment: The noise level in the work environment is usually moderate.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Associate Dentist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Take care of your community while participating in activities to promote a positive image of the company! Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Associate Dentists are responsible for providing dental services to patients with the support of their team. Our practice has: DentaPro software Digital x-ray and Panorex units Fiber-optic handpieces Yearly OSHA and HIPPA and Emergency Management training Ratio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per provider Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location) Office flow: average 10-12 operative patients and 20-25 hygiene patients State insurance plans, PPO and out-of-network payor mix Qualifications: ***This opportunity is for Friday's and Saturday's only*** ***This opportunity provides growth and development through mentoring and collaboration*** What we offer: Guaranteed base pay in excess of $80k with uncapped earning potential Student loan repayment assistance Sign on bonus (select locations) No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications, and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, DEA, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults We value teamwork, mutual respect, and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Posting Title: X-Ray Technologist Overview: Fast Pace Health strives to provide a best in class patient experience in every interaction. We are seeking a highly-skilled, experienced X-Ray Technologist to join our growing team. Our ideal candidate will be deeply committed to nurturing our Fast Pace mission of teamwork, communication, empowerment and quality care in a friendly and encouraging environment.Fast Pace Health aims to push for a new vision of healthcare in rural communities that will consist of an array of different services. We are changing the delivery of healthcare in these rural areas by integrating excellent patient care, education, accessibility, and community service, in a way that puts the patient’s needs first and improves the health status of our communities. Why Choose Fast Pace Health : Fast Pace Health is a growing company! You will have the support and mentoring you need to become the best X-Ray Technologist you can be! We will help you grow your clinical competencies, and can offer you a rewarding career path. We work as a dynamic team to surpass our business goals by ensuring our patients receive the best care possible in a positive environment. -We offer competitive compensation and benefits such as holiday pay, PTO, medical, dental, vision and Work-Life balance, to name a few. - As a Fast Pace Health employee you will have the opportunity to participate in community events and outreach programs. This includes, but is not limited to, seasonal parades, book drives, festivals, trunk or treating, fun runs, and more. We dress up for holidays and celebrate with pot lucks. At Fast Pace, our community is our family, and we are a family first community. Responsibilities: Below, we have provided a high level view of what the role entails, with the complete job description discussed in detail during our interviewing process.Maintain behavior that is compliant with Federal and State regulations, guidelines, and requirements including working knowledge of all health information management issues such as HIPAA.Prepare exam and treatment rooms for patient intake.Nursing duties including measuring and recording patients' vital signs, draw blood, give injections, and perform clinical tasksObserve patients, charting, reporting changes in patients' conditions, such as adverse reactions to medication or treatment, and taking any necessary action.Operate or oversee operation of X-Ray equipment to produce images of the body for diagnostic purposesExplain procedures and observe patients to ensure safety and comfort during X-Ray ScansEnsures imaging equipment is proper operating condition.Prepare and maintain supplies and equipment for treatment.Assist patients utilizing a Virtual Medicine Provider.Ensure accurate completion of patient charts in a timely matter and forwarding charts as appropriate on a daily basis.Ability to adhere to the Core Values of the Company, of teamwork, communication, empowerment, quality of care, and friendliness.The ability to maintain friendly, cordial relations with all clients and employees; maintain a positive work atmosphere by acting and communicating in a manner that results in a positive work relationship with customers, co-workers and managers.Perform other duties as assigned by management. Experience Requirements and Preferences:: At least 1 year of experience as an X-Ray Technologist preferably in clinic setting, preferably Urgent Care.Indiana Residents Only: In Indiana, Limited Scope License requires a State License and proof of ARRT License Education Requirements:: High School Diploma or Its Equivalent License Requirements:: Full Scope X-Ray Technologist State License Compliance: Fast Pace Health is committed to the principle of equal employment and creating an inclusive environment for the benefit of our employees, our patients, and our communities. We are an equal opportunity employer and welcome job applications from qualified individuals without regard to race, creed, color, ancestry, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, veteran status, marital status, parental status, genetic information or any other legally protected characteristics or conduct. Please refer to the links below for information regarding your rights under certain federal laws: https://www.dol.gov/sites/dolgov/files/WHD/legacy/files/fmlaen.pdfhttps://www.dol.gov/whd/regs/compliance/posters/eppac.pdfMississippi Residents Only:In Mississippi, Fast Pace requires pre-employment/drug/alcohol testing as a condition of employment. The law requires that Fast Pace notify applicants, in writing, upon application and prior to the collection of the specimen for drug and alcohol test, that they may be tested for “the presence of drugs [or alcohol] in their metabolites.” Miss. Code. Ann. 71-7-3(5).Applicants are limited to individuals from states, excluding the following: California, Colorado, Hawaii, Illinois, New Jersey, New York, Rhode Island, Washington, and the District of Columbia. Brand Name: Fast Pace Health

Posting Title: X-Ray Technologist Overview: Fast Pace Health strives to provide a best in class patient experience in every interaction. We are seeking a highly-skilled, experienced X-Ray Technologist to join our growing team. Our ideal candidate will be deeply committed to nurturing our Fast Pace mission of teamwork, communication, empowerment and quality care in a friendly and encouraging environment.Fast Pace Health aims to push for a new vision of healthcare in rural communities that will consist of an array of different services. We are changing the delivery of healthcare in these rural areas by integrating excellent patient care, education, accessibility, and community service, in a way that puts the patient’s needs first and improves the health status of our communities. Why Choose Fast Pace Health : Fast Pace Health is a growing company! You will have the support and mentoring you need to become the best X-Ray Technologist you can be! We will help you grow your clinical competencies, and can offer you a rewarding career path. We work as a dynamic team to surpass our business goals by ensuring our patients receive the best care possible in a positive environment. -We offer competitive compensation and benefits such as holiday pay, PTO, medical, dental, vision and Work-Life balance, to name a few. - As a Fast Pace Health employee you will have the opportunity to participate in community events and outreach programs. This includes, but is not limited to, seasonal parades, book drives, festivals, trunk or treating, fun runs, and more. We dress up for holidays and celebrate with pot lucks. At Fast Pace, our community is our family, and we are a family first community. Responsibilities: Below, we have provided a high level view of what the role entails, with the complete job description discussed in detail during our interviewing process.Maintain behavior that is compliant with Federal and State regulations, guidelines, and requirements including working knowledge of all health information management issues such as HIPAA.Prepare exam and treatment rooms for patient intake.Nursing duties including measuring and recording patients' vital signs, draw blood, give injections, and perform clinical tasksObserve patients, charting, reporting changes in patients' conditions, such as adverse reactions to medication or treatment, and taking any necessary action.Operate or oversee operation of X-Ray equipment to produce images of the body for diagnostic purposesExplain procedures and observe patients to ensure safety and comfort during X-Ray ScansEnsures imaging equipment is proper operating condition.Prepare and maintain supplies and equipment for treatment.Assist patients utilizing a Virtual Medicine Provider.Ensure accurate completion of patient charts in a timely matter and forwarding charts as appropriate on a daily basis.Ability to adhere to the Core Values of the Company, of teamwork, communication, empowerment, quality of care, and friendliness.The ability to maintain friendly, cordial relations with all clients and employees; maintain a positive work atmosphere by acting and communicating in a manner that results in a positive work relationship with customers, co-workers and managers.Perform other duties as assigned by management. Experience Requirements and Preferences:: At least 1 year of experience as an X-Ray Technologist preferably in clinic setting, preferably Urgent Care.Indiana Residents Only: In Indiana, Limited Scope License requires a State License and proof of ARRT License Education Requirements:: High School Diploma or Its Equivalent License Requirements:: Full Scope X-Ray Technologist State License Compliance: Fast Pace Health is committed to the principle of equal employment and creating an inclusive environment for the benefit of our employees, our patients, and our communities. We are an equal opportunity employer and welcome job applications from qualified individuals without regard to race, creed, color, ancestry, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, veteran status, marital status, parental status, genetic information or any other legally protected characteristics or conduct. Please refer to the links below for information regarding your rights under certain federal laws: https://www.dol.gov/sites/dolgov/files/WHD/legacy/files/fmlaen.pdfhttps://www.dol.gov/whd/regs/compliance/posters/eppac.pdfMississippi Residents Only:In Mississippi, Fast Pace requires pre-employment/drug/alcohol testing as a condition of employment. The law requires that Fast Pace notify applicants, in writing, upon application and prior to the collection of the specimen for drug and alcohol test, that they may be tested for “the presence of drugs [or alcohol] in their metabolites.” Miss. Code. Ann. 71-7-3(5).Applicants are limited to individuals from states, excluding the following: California, Colorado, Hawaii, Illinois, New Jersey, New York, Rhode Island, Washington, and the District of Columbia. Brand Name: Fast Pace Health