FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Details Department:Physics Amb 001Schedule:Full time Day shiftHospital:Ascension Via Christi, St FrancisLocation:Wichita, KansasBenefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your communityBenefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance and salary range at the time of the offer.Responsibilities Ensure the quality of care in the use of radiation-producing sources and imaging equipment, while protecting patients and staff from radiation.Perform required calibrations on equipment.Recommend and justify new equipment and products for thedepartment.Conduct equipment performance reviews as needed and implement quality control procedures for imaging devices.Recommend radiation safety procedures to areas using radiation.Educate staff in radiation safety practices.Support all physics aspects of patient treatment including consultation with radiation oncologists, calculation of radiation doses, design and fabrication of treatment aids and assurance of the accuracy of all treatment parameters.Requirements Licensure/Certification/Registration:Medical Physicist credentialed from the American Board of Radiology obtained within 12 Months (1 year) of hire date or job transfer date required.Education:Master or Doctorate in Physics, Chemistry, Medical Physics, Health Physics or Radiological Sciences, or be enrolled in and in good standing with a CAMPEP-accredited program, or be partaking in an American Board of Radiology (ABR)-approved Structured Mentorship program.Additional Preferences No additional preferences.Why Join Our Team Ascension Via Christi caregivers have been caring for and providing healing to Kansas communities for more than 135 years. As the largest healthcare provider in Kansas, we offer career opportunities across a number of hospitals, clinics, therapy centers and home health services.Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states.Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you.Equal Employment Opportunity Employer Ascension will provide equal employment opportunities (EEO) to all associates and applicants for employment regardless of race, color, religion, national origin, citizenship, gender, sexual orientation, gender identification or expression, age, disability, marital status, amnesty, genetic information, carrier status or any other legally protected status or status as a covered veteran in accordance with applicable federal, state and local laws.For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish)poster.As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension.Pay Non-Discrimination NoticePlease note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants.E-Verify Statement This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.E-Verify

Build your best future with the Johnson Controls Team.As a global leader in smart, health and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offer:Competitive salaryPaid vacation/holidays/sick timeCompany vehicle, Tools, and Equipment to complete all jobsComprehensive benefits package including 401K, medical, dental, and vision careOn the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out: A Day in a life of Johnson ControlsWhat you will do:This position will create value for JCI stakeholders by providing technical expertise to the UPG (Unitary Products Group) Engineering Labs for systems and controls of lab equipment, supporting two locations. You will work and collaborate with other cross functional disciplines such as test system technicians, maintenance engineers and the calibration team to support various test systems and apparatus, as well as development of new. You will serve as a technical leader for equipment and advanced technology of lab operations while maintaining and improving systems to adhere to changing agency test standards. You will also play a key role in autonomous tracking of equipment performance within the lab and report out on key performance metrics / indicators (KPIs) to management as well as coordinate activities with others outside the immediate team in other JCI locations to standardize technologies and approach, while also investigating alternate strategies to create a world class R&D operation. Typical daily activities include:Develop controls systems for locally developed and proprietary test-and-measurement systems (program and support PLC, HMI, data acquisitions systems and telemetry)Collaborate with the maintenance team to support equipment and maximize uptime / performance.Lead problem solving teams and drive issue resolution plans.Track the impact of those projects on KPI’s.How you will do it:Design and specify control packages and provide initial programming and periodic updates for Wichita and Norman locations (some travel).Develop and support strategies and data collection arrays to track lab process performance and report out on KPIs such as productivity, utilization, and ROI for capital equipmentProvide technical support to a team of technicians, collaborate, instruct and provide training in the operation of internally developed controlsAssist with the implementation of continuous improvement projects and processes to eliminate waste, solve operational issues, and improve efficiency of lab operation.Development project plans and schedules to meet or optimize required development timeline.Create and update system drawings (CAD)Facilitates and promotes teamwork and communications within different lab groupsProvide input to Manager regarding project estimates and time schedulesPerform other duties as assigned by UPG Engineering management consistent with company policies and procedures.What we look for:Bachelor’s degree in Electrical Engineering, Electrical Engineering Technology degree, or equivalent combination of education and experience.Demonstrated knowledge of industrial controls, particularly Rockwell, Siemens PLC programming and related HMI programming languagesAbility to design PLC and other controlled industrial controls system (knowledge of data acquisition hardware process control loops and techniques is required)A minimum of five years’ experience working with equipment utilizing PLC industrial controls.Strong electrical aptitude including unit wiring, controls, and instrumentationStrong mechanical aptitude and problem-solving skills.Demonstrated ability to work collaboratively in a team environment.Ability to organize and manage simultaneous tasks and projects.Strong interpersonal skills; effective and professional communication.Ability to make decisions quickly to maintain project schedules.Proficiency using the Microsoft OS, Office modules and other software applications or tools will be a must to facilitate seamless gathering and tracking of engineering lab performance: Access, Excel, Outlook, PowerPoint, Project, and Word at minimumPREFERRED:Familiarity with residential and light commercial HVAC equipment including air handlers, indoor coils, condensing units, heat pumps, gas furnaces, respacks, and their associated components.Knowledge of and experience with refrigeration (refrigerants, refrigeration strategies and equipment)Technical expertise related to NFPA 70e calculations and compliance for lab electrical distribution systems.Experience with National Instruments/Emerson LabView programmingFamiliarity with industry standards including AHRI, ASHRAE, DOE, EPA, NEC, UL/CSA, etcAbout the Manager:I have been working in the HVAC industry for 30+ years. My experience spans design of residential HVAC products to support of industrial controls and equipment in both manufacturing and design realms. I have held positions where the focus was with component level electronics to other opportunities where the focus was large plant facilities and equipment. My interests now revolve primarily around management of persons in similar types of roles and building teams to support product-design engineering projects in development of HVAC products (I also have extensive experience with manufacturing fabrication and assembly). If you consider this role, we will work together to create and support lab systems, particularly the electrical control aspects, and develop improved approaches to benchmarking performance and improving these systems. Expect to be challenged in this role to learn new tools and systems, tackle complicated projects, plot new directions and introduce new approaches in the face of uncertainty, and conduct trials to evaluate new technologies. As a leader, I’m focused on continuous learning and development – both building our own engineering skillsets but also improving our processes and products. I value candidates with strong work ethic and a growth mindset who enjoy being creative, proactive, and detail-oriented in their work. I hope you’re excited to take on this challenge and help Johnson Controls streamline engineering development of new products!Johnson Controls has a lot of work to do and if you join me, you will accumulate a broad set of experiences and be able to add the word “transformation” to your resume! Let’s roll up our sleeves and do this!

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

At JCI, we are committed to becoming the global leader in smart, healthy, and sustainable buildings. Our mission is to redefine building performance to better serve people, places, and the planet. We invite you to join our winning team and build your best future with us! Our diverse teams have the opportunity to support a wide range of industries worldwide, and we are dedicated to your professional development through impactful projects and continuous learning. Enjoy our supportive work environment focused on enhancing your physical, financial, and emotional wellbeing.What We Offer** $4,000 SIGN ON BONUS **Competitive salary and bonusPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care starting day one!Developmental opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyA Day in the Life - Engineering: http://www.youtube.com/watch v=ZtUwSd41LgM&t=136sThis position is scheduled for the second shift, with working hours from 2:30 PM to 11:00 PM. **This role is not eligible for visa sponsorship.What you will doThe following reflects management’s definition of essential functions for this job but does not restrict the tasks that may be assigned. Management may assign or reassign duties and responsibilities to this job at any time due to reasonable accommodation or other reasonsHow you will do itDesign and document control systems for various types of custom automated equipmentProduce and maintain design drawings via CAD, CREOParticipate in cross-functional teams to address and resolve manufacturing, design and quality problems, and ensure the continuous, on-going improvements of processes and methods as well as reduce manufacturing cycle times while maintaining high quality standards.Coordinate machine debug, power-up, and machine validation, and improvement.Participate in the development of test protocols for all aspects of mechanical components, equipment and machineryProvide ongoing support to ManufacturingDrive continuous efficiency and effectiveness in day-to-day activitiesSupport the organization with sharing and implementing best practices across all locationsWhat we look forRequiredBachelor of Science in Electrical or Mechatronics Engineering, or relevant experience in lieu thereof.Minimum 3 years of experience in PLC/HMI programmingExperience electrical design and machine PLC/HMI programmingExperience in designing mechanical assemblies and programming systems in Robotics, Automated Systems, Vision Systems and Machine ControlsExperience in Project ManagementAbility to problem solve effectivelyAccurate and detail oriented, with the ability to follow through on tasks and objectivesAbility to function effectively as part of a team

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Johnson Controls Inc., is looking for a detail-oriented Logistics Engineer to monitor our current operations and determine more efficient production processes. The Logistics Engineer's responsibilities include performing time studies, analyzing operations for opportunities for improvement, designing workflows and improving material flow, efficient site and assembly layouts and production processes, reducing inefficiency, and ensuring that final products meet the established quality standards.The Logistics Engineer is responsible, under the guidance of the Warehouse and Logistics Manager, for facilitating Logistical Engineering and Lean activities within the plant or a portion of the plant. Through implementation of specific action plans, training and advocacy, the incumbent will help to influence the organization to a new culture. They will demonstrate success through increased plant operational metrics performance. The incumbent will be responsible for using the processes, measurements, standards, and efforts available with the primary focus areas of Industrial Engineering & continuous improvement. The incumbent is fully accountable for supporting the creation of an inclusive and positive organizational culture while assisting developing their personal skills.How you will do it:To be successful as an industrial engineer you should be able to design production systems that maximize productivity, reduce wastefulness and production issues, are cost-efficient, and ensure high product quality.Designing the layout of facilities and determining personnel requirements, maintaining labor models.Improve site Material Flow by using tools like PFEP, Floor space Planning tools and Inv. Calculations.Work projects to eliminate forklift from assembly shop, introducing Tugger trains.Work projects to reduce material from border line.Work lean manufacturing projects with focus in cost and inventory reduction.Calculate Capacity and maintain site capacity models.Design Flows, internal routes, internal milk runs.Design Carts / racks / internal packagingDefine replenishment processes.Design Part presentation to assembly linesPerform Indirect Labor time studies, calculate utilization and developing action plans for improving plant efficiency.Improve Material flow and introduce Material automation. (AGV/VGV etc.,)Reviewing production schedules, processes, specifications, and related information.Map production processes / use Value Stream Mapping to identify constraints and help with constraint management. Developing and implementing process improvements and analyzing current processes for new technological upgrades.Developing design and production standards in cooperation with management and Shop personnel.Preparing material and equipment lists, purchase orders, cost analyses, and estimated production costs.Training staff for new processes and providing instructions and manuals.Managing process/project documentation and preparing reports.Identifies waste and opportunities for the business to improve in (among others by using Lean principles and methodologies).Lead the cultural change of JCI employees (from firefighting culture to working according to standards), including leadership teams in their Lean competence development by coordinating the necessary training and coaching, and build internal capabilities. Utilize key Toyota Production System methodologies.Collaborate with site lean teams for improvements, participate or lead Kaizen events, and waste reduction.What we look for:RequiredBachelor's Degree in Industrial Engineering, or related field of study2+ years of relevant work experienceAdvanced knowledge of production machinery, processes, and standardsCritical thinking and problem-solving skills.Strong communication and presentation skills.Troubleshooting skills and attention to detail.Proficiency in MS Office and AutoCAD.Time studies, calculating Capacity, Labor models.Experience in Toyota Production System principles and culture.PreferredMasters in Industrial and Systems engineering or Relevant work experience > 5 yearsProject Management – Proven success in creating project schedules and milestones, leading teams, achieving results through influencing others, and being a strong team player.Innovative thinking – Ability to lead innovative and/or transformative projects and strives for continuous improvement.Analytical thinking - Exceptional ability to analyze data and utilize it to make sound business decision.Customer oriented – Demonstrate strong focus on customer service and client satisfaction while maintaining high ethics and professional integrity in all interactions.Conflict management and resolution skills - Build consensus, anticipate and solve problems.Results focused – Ability to organize and manage multiple tasks, and at times competing priorities.Communication skills – Demonstrate strong communication, interpersonal, and collaboration skills necessary to lead and manage teams and projects effectively.Toyota Production System principal knowledge of Takt time, flow production, Kanban and Load leveling.Certified in MODAPTs or other time motion studies, AutoCAD, Lean & Six Sigma (Statistical knowledge, SPC, MSA, DOE, Capability studies), any problem solving tool. Ability to run Kaizen events.

We are currently seeking home providers in: Wichita / Sedgwick County, KS Are you looking for a meaningful work opportunity in your home Become a Host Home / Shared Living provider with Mosaic at Home®! Average annual income of $47,000 (federally tax-free) plus room & board. You must reside in the state of Kansas (due to state funding) and own or rent your home. For nearly 40 years, Mosaic has provided improved quality of life, greater stability and increased community access for people with disabilities through our shared living service, which also offers a satisfying career option for home providers. As a home provider, you share your home with an individual with a disability. Your responsibility is to maintain a safe and healthy home environment for the individual and be a mentor while helping the person as needed with the tasks of daily living. In this role, you assist withcultivating life skills and fostering independence. We work to match interests and lifestyles between people. You will participate together in activities of daily living, both at home and in the community. Through the matching process, you are able to match with a person whose needs fit the support level you wish to offer. Duties vary for each individual from minimal support (i.e., budgeting, medication, transportation, activities of daily living) to full support (i.e., dressing, toileting, feeding, positive behavioral support, etc.), and the income is commensurate with the level of support provided. Responsibilities include: Provide support for tasks such as cooking, cleaning, laundry, budgeting, decision-making, etc.Skill acquisitionMedication administrationMedical appointmentsSupport with overall health and well-beingDaily documentation via web-based case management application (THERAP)Provide fun and leisure experiences to the individual by providing opportunities of community inclusion, integration and socializationCompliance with all state/agency policy and proceduresCommunicate effectively with team members as neededSupport physical needs of individual servedProvide transportation Possible responsibilities depending on your preference: Assistance with bathing, toileting, feeding, behavioral support, etc.Provide support for medical protocols, such as seizure, fall, feeding tube, etc.Care for someone with complex physical/medical needs (i.e., hearing impaired, vision impaired, non-ambulatory, etc.)Potential support of behavioral issues. #homehealth #RN #LPN #HomeAide #caregiver #fosterMust be a resident of the state in which you wish to provide contracted services inTransportation, valid driver's license, car insurance and current registrationActive home/renters insuranceOwn or rent your own home/apartment/condo/townhouseMust be at least 18 years of ageExperience preferred but not requiredReliable computer and internet accessComplete all state mandated trainingsEnvironmentally safe and clean residenceAbility to pass State/Federal and APS/CPS background check

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you. #LI-Onsite #LI-OnsiteWe are actively seeking an Orthodontist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Take care of your community while participating in activities to promote a positive image of the company! Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Orthodontists are responsible for providing Orthodontic services to patients with the support of their team. Our practice has: DentaPro software Digital x-ray and Panorex units Fiber-optic handpieces Yearly OSHA and HIPPA and Emergency Management training Ratio of 1 dental assistant per 15 patients scheduled Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location) Office flow: average 50-60 patients per day State insurance plans, PPO and out-of-network payor mix Qualifications: We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Certificate of completion of a residency from an accredited post-graduate Orthodontic Program Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults This opportunity provides: Growth and development through mentoring and collaboration Attractive sign-on bonuses and Relocation services for all FT positions Student loan repayment assistance What we offer: Guaranteed base pay in excess of 165K with uncapped bonus potential Sign on bonus No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan with Company match Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Overview: Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do! With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care to underserved families in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Associate Dentist to join our growing team. Support our mission to provide excellent dental care in the community and help us create more smiles and memorable experiences for children and adults. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Take care of your community while participating in activities to promote a positive image of the company! Join in morning huddles (hey, you can even run one!), plan your day and let your team know how much you appreciate them, highlight great examples of customer focus, collaboration, meeting goals, etc. Love working with kids (they make up 70% or more of our patient base) Associate Dentists are responsible for providing dental services to patients with the support of their team. Our practice has: DentaPro software Digital x-ray and Panorex units Fiber-optic handpieces Yearly OSHA and HIPPA and Emergency Management training Ratio of 1 hygienist, 1 hygiene assistant, 2 dental assistants per provider Patient Base: primarily ages 3-21 and up to 30% adult population (depending upon location) Office flow: average 10-12 operative patients and 20-25 hygiene patients State insurance plans, PPO and out-of-network payor mix ***This opportunity provides growth and development through mentoring and collaboration*** What we offer: Guaranteed base pay in excess of 200k with uncapped earning potential Sign on bonus Student loan repayment assistance Guaranteed base pay No lab fees FT providers are eligible to participate in Medical/Dental/Vision insurance plans, HSA/FSA Short Term Disability/Long Term Disability and Basic Life Insurance plans are paid for by company 401(k) Retirement Plan Company paid malpractice insurance coverage Paid holidays and time off Continuing Education reimbursements CE offered through ADA Accredited Continued Education Recognition Program (C.E.R.P) Reimbursements for associated licenses, certifications, and professional dues such as ADA and/or AAPD memberships Multiple schedule options to help maintain a healthy work/life balance VISA and Green Card sponsorship available We expect you to have: DDS/DMD from a dental education program accredited by the Commission on Dental Accreditation Current, valid license to practice dentistry in states where providing care or eligible for licensure Other certifications as required - CPR, DEA, etc. Nitrous Oxide certification (only LA, MS, DC, TX, MA) Compassion and a strong desire to provide dental care to both children and adults We value teamwork, mutual respect, and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.