Harvey, LA 70058 • (45 miles) • Full Time • 10/9/2026

Installation of pneumatic and hydraulic systems, emergency shutdown systems and equipment under minimal supervision.Layout, measure, fabricate and install tubing tray.Layout, measure, bend, cut, thread, ream and fit hard pipe systems.Install single line and group tubing and fittings.Able to layout and install pneumatic and hydraulic panels and end devices.Demolition of tubing and end devices.Knowledge of industry and American Petroleum Institute standards.Able to read relevant construction drawings.Knowledge of pneumatic and hydraulic control logic.Proficient in the use of tools of the trade.Able to recognize and avoid safety hazards and dangersAll above functions performed with minimal supervision.

Gray, LA 70359 • (0.7 miles) • Full Time • 10/6/2026

OVERVIEW: Job Title: Shop Helper Schedule: Monday – Friday (weekends as needed)Location: Amelia, LA.Expectations: A successful candidate will exhibit characteristics that support the following: Safety Awareness, Work Ethic, Technical Skill, Customer Focus, Open Communication, Implementing Vision and ValuesRESPONSIBILITIES:Break down cement casts from oyster reefs/molds safely, with proper PPE. Operates an overhead crane Assume a safe position during lifting operations and be aware of the position of others Complete daily visual inspections and minor maintenance to ensure equipment is in proper working condition. Lubricates machinery and equipment Splices and repairs cables and ropes Participate in daily JSEA planning discussion Proper PPE selection and usage Conduct behavior-based safety o

Metairie, LA 70009 • (43.6 miles) • Full Time • 10/3/2026

Description: The primary purpose of the Project Manager is to oversee all aspects of the project and be responsible for managing the project costs, field labor, subcontractors/vendors and delivering a quality, safe and on time project, under budget, exceeding customer’s expectations. First Line ownership/accountability/responsibility of the project(s) – No Excuses. Maintain and act in accordance with the MCC “Core Values” and to “Lead by Example.”Principal Duties and Accountabilities:Champion of project safety. Maintain a safe and secure work environment through maintaining safety meetings, incident investigations and employee involvement.Total responsibility of executing a project through the project life cycle.Provide key leadership and responsibility for planning and managing the instal

Saint Rose, LA • (35.1 miles) • Full Time • 9/24/2026

Industrial ElectricianLocation: St. Rose, LA 70087 and surrounding areaPay Rate: $25.00 - $30.00/ hourSchedule: Monday – Friday, 7:00 AM – 4:00 PM; overtime availableType: Contract to full-time hire Are you an experienced electrician with a strong background in marine electrical systems and troubleshooting? Integrity Trade Services is hiring skilled Electricians in St. Rose, LA. Position Overview: Join a reputable team where your expertise in marine electrical systemsincluding generators and steeringwill be valued. This role offers competitive pay, weekly wages, and potential career growth within a trusted organization.Key Responsibilities:Troubleshoot and diagnose electrical systems at all levels, including 3-phase motors, generators, switchboards, motor starters, and automation controls.

New Orleans, LA 70121 • (42.2 miles) • Full Time • 9/19/2026

OverviewCORT Furniture Rental is hiring immediately for full-time non-CDL drivers in Jefferson, LA!The Delivery Driver works collaboratively as part of the Operations team. You will be responsible for loading furniture and delivering safely to customers’ homes or office spaces. You will also be assembling furniture for the customer and going above and beyond to ensure a positive customer experience.Pay: $19 / hour + $1500 Retention BonusSchedule: Standard is Monday-Friday 8am-4:30pm; some flexibility or overtime may be requiredOpen interviews available; just walk-in and ask for Christopher.Open Interview Times:Tuesdays from 10 AM - 12 PMThursdays from 10 AM - 12 PMLocation:CORT Furniture Rental5035 Bloomfield St. Jefferson, LA 70121ResponsibilitiesStart your day at our warehouse where you’

Houma, LA 70364 • (6.5 miles) • Full Time • 9/15/2026

Quality Process Services QPS Job Title:Industrial / Construction Electrical Location:Will Vary Depending on Project Location Hours:Will typically be 10-12 per day Per diem:will be available depending on project and location Position Summary Weare seeking a skilled and safety-focused Industrial Construction Electrician to install electrical systems on industrial construction projects. The ideal candidate will have experience working in industrial environments such as manufacturing facilities, refineries, power plants, warehouses, or large industrial construction sites. This position requires the ability to read blueprints, follow electrical codes, and work effectively in a fast-paced construction environment. Key ResponsibilitiesInstall electrical systems, conduit, cable trays, wiring, pane

Metairie, LA 70001 • (42.4 miles) • Full Time • 10/9/2026

About the CompanyRNGD is a rapidly scaling organization emerging as a nationally recognized leader in construction through our unique Renegade mindset focused on innovation, creativity, and culture. The team is made up of a highly engaged group of seasoned professionals and emerging leaders. We are creators who believe that what we build drives the growth of our cities and that to fulfill our mission, we must constantly challenge the old way of doing things. Headquartered in New Orleans, Louisiana, we thrive on building communities, building teams, building leaders, and growing the business throughout the Southeast region with additional offices in Mississippi, Tennessee, and Alabama.About the RoleWe’re looking for Director of Quality Control that will provide strategic leadership for RNGD

Houma, LA 70363 • (12.2 miles) • Full Time • 10/9/2026

Position: Instrumentation & Electrical TechnicianReports To: ForemanSummary: The I&E Technician is tasked with equipment maintenance, calibration, and record-keeping for measurement/instrumentation and electrical equipment, in compliance with all applicable internal requirements and external regulations.Essential Qualifications, Duties, and Responsibilities: (Other duties may be assigned)Must have a clean driving record & hold a valid driver’s license with the operating capacity Gross Vehicle Weight Rating (GVWR) of 10,001 - 26,001 pounds - (Louisiana: Class D Chauffer’s License)TWIC Card requiredGeneral pipeline knowledge and working experience with medium voltage equipment up through 4,160 Vac.Install, maintain, inspect, troubleshoot, repair, and perform preventative maintenance on all f

Geismar, LA • (39.1 miles) • Full Time • 10/8/2026

Boss LTG is a leader in the design, manufacturing, and rental of portable lighting and temporary electrical power solutions used across industries throughout North America. Our products including stadium light towers, electric and diesel light towers, solar-powered lighting, diesel gen-sets, explosion-proof lighting, general floodlighting, and temporary power distribution substations are built and manufactured in the United States and help customers reduce labor costs, increase productivity, and maintain a safe work environment. We are proud to be the exclusive rental provider of Boss LTG products and are professionally certified in temporary job-site electrical distribution and confined-space entry lighting.Job DescriptionAs a Manufacturing Planner/Scheduler at Boss LTG, you will play a c

Houma, LA 70363 • (12.2 miles) • Full Time • 10/8/2026

This position will be located at the Halliburton Cell division of Vallourec Tube-Alloy.The location of this will be in Lafayette, LA.Quality Assurance Inspector GENERAL DESCRIPTION: Responsible for setting up and performing dimensional inspections in intricate and close tolerance components using state of the art inspection equipment. Position requires high degree of maturity and interface with shop floor personnel, manufacturing supervision and management.DUTIES:Must be able to perform all duties of a QA Inspector C, and Apprentice Inspector as well as perform the following duties, (as required by facility):Perform Dimensional Inspections on Products Made to Customer’s DrawingsPerform Dimensional Inspections on NipplesAssist all Departments with Locating, Customer, Licensor and Tube –Allo

Gray, LA 70359 • (0.7 miles) • Full Time • 10/8/2026

Job Title: DrafterLocation: Gray, LAType: Direct HireCompensation: $60,000 - $75,000Work Model: Onsite – onsiteHours: 40.0ResponsibilitiesCreate detailed 3D models, fabrication drawings, and installation drawings using SolidWorks or similar CAD software. Develop and maintain Bills of Materials (BOMs). Ensure designs meet engineering standards, customer requirements, and manufacturing needs. Collaborate with engineering, fabrication, and installation teams to support project execution. Review designs for accuracy and provide technical support during fabrication and installation. Assist with design reviews, troubleshooting, and continuous process improvements. Mentor junior designers and support technical documentation development. Qualifications3+ years of experience in mechanical design, d

Gonzales, LA 70737 • (38.8 miles) • Full Time • 10/8/2026

ResponsibilitiesProvide technical support in person or over the phone to educate potential customers on the safe use and features of waterblast equipmentGenerate work order to perform routine scheduled maintenance on equipment and complete necessary documentation that work is completedPerform assembly and/or repair services, at customer facility or job site as requestedInspect and diagnose customer and company owned equipment, and perform necessary repairs for equipment to be fully operationalAssign necessary parts to appropriate work orders, maintain sufficient inventory levels, reorder parts/supplies as needed and perform cycle counts to reconcile variances, as requiredPerform Check in and Check out processes of all Rental Equipment, document any necessary repairs or damage and notify ap

Kenner, LA • (39.2 miles) • Full Time • 10/8/2026

Job Title: Manual MachinistJob DescriptionAs a Manual Machinist, you will be responsible for machining parts for rotating equipment such as pumps, shafts, couplings, rings, cases, turbines, and valves. You will operate manual mills and lathes, primarily working with steel and stainless steel. Precision is key, as you will be working with tolerances down to .5 1000's of an inch.ResponsibilitiesMachining parts for rotating equipmentOperating manual mills and lathesWorking primarily with steel and stainless steelEnsuring precision with tolerances down to .5 1000's of an inchEssential Skills4+ years of experience as a Manual MachinistProficiency in operating lathe and millSkills in manual machining, including horizontal boring mill, VTL, latheExperience with calipers, blueprint reading, microm

Metairie, LA 70002 • (43.7 miles) • Full Time • 10/8/2026

We are RED Group. And We're Thinking Ahead.RED Group is an Industrial Control Systems (ICS) technology development and integration firm specializing in Process Automation, IT/OT Consulting, and Industrial Cybersecurity. We stand out in experience and expertise. We are committed to an employee-centric culture of success where we put our people first and give our staff the opportunities and push that they need to succeed and improve. As a result, they give their utmost to help our clients and get better at what they do each day.Our mission is to add value to our clients' organizations by selecting and deploying the proper resources and technology to ensure their goals are realized. Our team of Engineers, Consultants, Programmers, and Technicians provide the valuable expertise necessary for e

Geismar, LA 70734 • (38.9 miles) • Full Time • 10/7/2026

Senior Electrical & Instrumentation Engineer / SpecialistLocation: Geismar, LA (Full relocation assistance provided)Join a highly respected manufacturing operation where your technical expertise will directly improve plant reliability, safety, and operational performance. This is an opportunity for an experienced Electrical & Instrumentation professional who enjoys solving complex problems, driving continuous improvement, and taking ownership of critical plant systems.In this onsite role, you'll serve as a subject matter expert for electrical and instrumentation equipment, partnering with operations and maintenance teams to improve reliability and minimize downtime. You'll lead troubleshooting efforts, perform root cause failure analysis (RCFA), develop practical long-term solutions, and s

Harvey, LA 70058 • (45 miles) • Full Time • 10/7/2026

Team membersmake the biggest impact on our guest experience and bring our restaurants to life! As part of our KFC Family, you will be part of a team that will provide thorough training, learning opportunities that help you grow.Team Member (Cook)Responsibilities:You will make our world-famous chicken at the highest quality standardsPartner with your Team Members to manage the products needed to fulfill guest ordersProvide a top-notch guest experience that includes friendly interactions, fresh meals and a commitment to cleanlinessContribute to the overall positive and collaborative family environmentSuccess Factors:Master the art of our secret recipe through our world-class trainingTakes absolute pride in everything you doValues customer service and positively impacts our guests’ experience

Houma, LA 70363 • (12.2 miles) • Full Time • 10/6/2026

Job Title: Production Program ManagerLocation:Houma, LAPosition Overview: The Production Program Managercoordinates and leads the build efforts and activities for completing vessels, working under the general direction of the Program Management department.Key Responsibilities:Coordinate the entire effort of activities on the vessel(s), including monitoring the status of all production budgets and schedules.Oversee the efforts of production and subcontract crafts.Manage material/receiving orders and develop compartment completion and delivery schedules.Act as the primary contact with the owner’s representative on production aspects of the project.Qualifications:Minimum of eight (6) years of experience in a shipbuilding or related manufacturing field setting, including production planning/sc

Houma, LA 70363 • (12.2 miles) • Full Time • 10/5/2026

POSITION SUMMARY:Performs magnetic particle, liquid penetrant inspection, and visual inspection activities on variousequipment to company, customer, or regulatory requirements. Performs testing and certification ofcustomer related lifting and rigging equipment. Applies knowledge of inspection principles according tocustomer specifications or regulation standards.ESSENTIAL DUTIES AND RESPONSIBILITIES:• Receives and follows oral or written instructions to output completed projects.• Loads and unloads material and/or rigging equipment onto or from pallets or baskets by hand,or using alternative lifting equipment• Operates powered industrial truck (Forklift) to stage and/or move pipe and miscellaneousequipment throughout the facility.• Perform Magnetic Particle and Liquid Penetrant testing and

Geismar, LA 70734 • (38.9 miles) • Full Time • 10/5/2026

We are seeking a reliable and safety-focused individual to NDT LVL II Radiographer with Nondestructive Testing (NDT) LVL II MT/PT/UT/RT certifications. Responsibilities include setting up and using NDT equipment, supporting inspections, recording results, and performing general job-related tasks. The ideal candidate is a team player, comfortable working at heights, with good communication skills, and committed to maintaining a safe work environment.• Full time hours• Competitive benefits• Immediate enrollment in training (Paid)Required Qualifications:• Minimum age – 18 years old• Valid Driver’s License• Pass hair follicle drug screen• Pass DISA background check• TWIC Card• Comfortability with heights• RT State Card• LVL II MT / PT/ UT / RT• Ability to work in team environment• Demonstrate

Metairie, LA 70003 • (40.7 miles) • Full Time • 10/5/2026

About the CompanyPMEP is a leading design-build mechanical, electrical, and plumbing contractor delivering high-quality, technically complex solutions across commercial, industrial, and institutional markets. Built on a foundation of craftsmanship, reliability, and deep technical expertise, PMEP partners closely with clients, designers, and builders to deliver integrated building systems that perform safely, efficiently, and sustainably.Our team is composed of highly skilled professionals who take pride in precision, accountability, and collaboration. We believe that the systems we build are critical to how buildings operate and how people experience them, and we are committed to continuously improving how those systems are designed, installed, and maintained. Headquartered in the Greater

Houma, LA 70360 • (6.7 miles) • Full Time • 10/3/2026

About the Role: Join Allstream Services & Rental as a Millwright Supervisor/Mechanic, where you'll play a crucial role in delivering high-quality surface preparation services. We are looking for passionate individuals who thrive in a dynamic environment and are eager to contribute to our mission of excellence in the industry. This is a mix of offshore and on-site role. Essential Duties and Responsibilities Other duties may be assigned at Management Discretion: Assembling and installing machines then testing them to make sure they are working correctlyMust work in full compliance with the approved safety regulationsManaging the layout and placement of equipment and machinery in factory settings to ensure minimum downtimeIdentifying and repairing problematic parts of a machine by running tes

Lockport, LA 70374 • (17.7 miles) • Full Time • 10/3/2026

Description: Job Summary:The Foreman of a crew is responsible for overseeing the construction, maintenance and operation of electrical systems, to ensure assigned projects are completed in accordance with design, budget, schedule and safety considerations.Reasonable Accommodations StatementTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.Requirements: ESSENTIAL JOB FUNCTIONS:Provideleadership and direction to crews to ensure safe, efficient, and qualityoperations.Work with GF in estimatingworker requirements, equipment and material, and develop “look ahead”schedules.Ensure crew follows GF’sschedule of activitie

Geismar, LA • (39.1 miles) • Full Time • 10/3/2026

Innophos is seeking a Maintenance Mechanic - Millwright to complete work orders including removing, repairing, and installing machinery and equipment in the field at the Geismar Plant. Key Responsibilities Communicate with unit operations to ensure the work site has been prepared and to avoid interfering with activities of other workers. Follows lockout-tag out procedures, checking for documentation of entry permit and check to make sure lines are closed and locked.Dismantle failed equipment (motors, pumps) using hand and power tools such as hammers, wrenches, crowbars, etc. Transports it to the shop using hoist, lift trucks, dollies, and rollers.Assess the failed equipment, order replacement parts, and assembles the equipment with the new parts.Re-install machinery after prepping the sup

New Orleans, LA 70123 • (39.5 miles) • Full Time • 10/3/2026

Benefits:Bonus based on performanceCompany carHealth insuranceTraining & developmentPaid time offAbout the Role: Join PIRTEK Elmwood as a Mobile Hydraulic Hose Technician, where you will play a crucial role in delivering high-quality hydraulic solutions to our valued customers. This dynamic position offers the opportunity to work hands-on in the field, solving problems and ensuring equipment runs smoothly. Responsibilities:Perform on-site hydraulic hose installations and repairs for various equipment.Diagnose hydraulic system issues and provide effective solutions.Maintain inventory of hydraulic components and tools in the service vehicle.Deliver exceptional customer service and build strong relationships with clients.Adhere to safety protocols and ensure compliance with industry standards

Metairie, LA • (42.5 miles) • Full Time • 10/3/2026

H&H is offering an exciting opportunity for a Hydraulics and Hydrology Engineer to join our growing Greater New Orleans office.H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-ter

Prairieville, LA 70769 • (44.6 miles) • Full Time • 10/3/2026

Hood Dental Care is growing! We are looking for energetic, compassionate, friendly people to join our team! The ideal candidate will be able to create an inviting experience for all patients entering our clinic. The candidate will be responsible for taking x-ray's, consulting patients on treatment options and treatment planning, assisting the doctor and hygienist with cleanings and exams, and communicating financial options with patients. Customer service skills and empathy are a must! The Hygiene Assistant must be flexible, positive, and willing to learn in a fast-paced environment. EDDA certification is a plus! We invite all members of the healthcare industry and service industry to apply!https://drive.google.com/file/d/1iqC3u3H_hJYVqIeJIvbnqyDyWeaotDpP/view?ts=649d8be1Job Type: Full-tim

Saint Gabriel, LA 70776 • (44.2 miles) • Full Time • 10/2/2026

*Benefits Eligibility: This position is eligible for benefits beginning the first of the month following your hire date.*Recruiting Agencies: Thorpe Specialty Services does not accept unsolicited resumes from recruiting agencies.Role and Responsibilities• Independently apply coatings and liners to a variety of surfaces, including tanks, pipes, and other industrial structures, using brushes, rollers, sprayers, or other equipment.• Perform surface preparation, including abrasive blasting, sanding, and cleaning, ensuring optimal conditions for coatings and liners.• Mix and prepare coatings and lining materials accurately to meet project specifications.• Inspect the application of coatings and liners for quality, ensuring proper adhesion, coverage, and uniformity.• Assist in the installation o

Geismar, LA 70734 • (38.9 miles) • Full Time • 10/2/2026

Global Environmental & Industrial Response (GEIR) is currently hiring Industrial Field Technicians to join our team. The Industrial Field Technician is responsible for the operation of equipment/tools to provide industrial and/or environmental cleaning. About Us:Global Environmental and Industrial Response works with our clients to understand environmental, health, and safety needs to develop and provide the best solution. Our ability to innovate helps us meet the needs of our customers. Our highly trained personnel are ready to serve industrial needs 24 hours a day, 7 days a week, 365 days a year!Global provides heavy industrial cleaning services to utilities, phosphate/ mining, chemical plants, pulp & paper, and manufacturing facilities, with specialization in hydro blasting and vacuum t

Metairie, LA 70001 • (42.4 miles) • Full Time • 10/2/2026

About the Position Cabildo Staffing is seeking an experienced Sheet Metal Mechanic for a commercial HVAC ductwork fabrication shop in Metairie, LA. This is a skilled position requiring the ability to independently lay out, form, assemble, and complete HVAC ductwork accurately and efficiently with minimal supervision.Starting Pay: $28.15/hourUnion Requirement: Employees must join the Sheet Metal Workers Union within 90 days of employment. Responsibilities Read and interpret shop drawings, fabrication details, and ductwork specifications.Independently lay out and form rectangular, round, and specialty ductwork and fittings.Fabricate elbows, transitions, offsets, reducers, taps, plenums, and equipment connections.Operate fabrication equipment safely, including brakes, shears, rolls, forming e

Saint Gabriel, LA 70776 • (44.2 miles) • Full Time • 10/2/2026

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and ext

Harahan, LA • (39.2 miles) • Full Time • 10/1/2026

Mechanical Assembly Technician Automation Personnel Services is seeking a hands-on Mechanical Assembly Technician to join a dynamic manufacturing team in the Elmwood area. This is an excellent opportunity for candidates with mechanical aptitude, assembly experience, and a strong work ethic who are looking for a stable, full-time schedule and competitive pay. Pay Rate $20 per hour Schedule and Hours Monday through Friday,5:00am-3:30pm Mechanical Assembly TechnicianDuties and ResponsibilitiesAssemble mechanical components, subassemblies, and finished equipment using hand and power tools.Read and interpret blueprints, assembly drawings, work instructions, and specifications.Perform mechanical fitting, alignment, and adjustments to ensure proper operation.Inspect parts and completed assemblies

Kenner, LA • (39.2 miles) • Full Time • 10/1/2026

We’re looking for an experienced General Foreman to lead storm response events. Currently, our yards are situated in Plymouth Meeting, PA; Cambridge City, IN; Walpole, MA; and Kenner, LA. Join us and help us continue building one of the most trusted teams in the industry.Position: Storm General ForemanPay: Competitive, based on experience, with storm-related performance bonusesSchedule: Flexible hybrid, with full availability for storm callsLead and manage large-scale storm restoration projects, overseeing 25–50 FTEs during storm events. Maintain a safe, efficient, and organized work environment at all times.Requirements:Proven experience managing storm projects or large-scale restoration eventsAbility to adapt quickly to storm restoration demands while meeting customer deadlinesStrong lea

Metairie, LA 70002 • (43.7 miles) • Full Time • 10/1/2026

Job Title: Civil Designer / CAD TechnicianCompany: Basin Engineering & SurveyingLocation: Metairie / New Orleans, LA (On-Site)Job Type: Full-TimeAt Basin Engineering & Surveying, we know that the difference between a good project and a great one lies in the details--the grading, the drainage, and the precise placement of every utility. If you are a CAD professional who wants to take your designs off the screen and into the real world, you belong here.We are a growing, multi-disciplinary engineering and land surveying firm headquartered in the New Orleans area. We don't just draft lines; we shape the infrastructure of tomorrow. We hold professional engineering licenses in 27 states, which means our team gets the project variety and scale of a massive national firm, while maintaining the clo

Gramercy, LA 70052-6301 • (27 miles) • Full Time • 10/1/2026

Description: Job Summary/ObjectiveThis role works closely with plant maintenance and operations to ensure compliance for pressure vessel integrity throughout the facility. This includes pressure relieve valve compliance and reliability assessments for piping and fixed vesselsEssential Function•Serves as a lead site technical resource for piping systems, stationary equipment and pressure relief valve (PRV) compliance.•Leads efforts to ensure site practices & documentation are in compliance with PSM Mechanical Integrity standard•Works with Operations and Maintenance in the planning, scheduling, execution, and documentation of PRV, stationary equipment and piping inspections•Works with site maintenance team, inspectors, and contractors to ensure repairs are performed according to specificatio

Marrero, LA • (42.7 miles) • Full Time • 10/1/2026

Job SummaryUnite Contracting seeks a dedicated, detail-oriented QC (Quality Control Welding Apprentice to join our manufacturing team. This entry-level position offers an excellent opportunity to develop expertise in quality assurance and welding inspection within a dynamic production environment. The apprentice will support implementing quality standards, assist with measuring and inspecting welded components, and gain valuable hands-on experience maintaining compliance with industry welding regulations. The ideal candidate is motivated to learn, possesses mechanical aptitude, and is committed to ensuring the highest quality in welding processes. Hours are 6 AM to 2:30 PM, Monday to Friday, plus overtime.DutiesAssist CWI senior quality control welding inspectors in performing dimensional

Houma, LA • (8.2 miles) • Full Time • 9/30/2026

Who We Are: Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees.What You Will Be Doing: As the Shop Service Manager, you will lead the Shop Technicians in the daily service operations of the shop. This position is responsible for providing a safe workplace and developing a “Safety First” culture. The Shop Service Manager position is responsible for hiring and developing employees as well as addressing emplo

Saint James, LA 70086 • (24.8 miles) • Full Time • 9/30/2026

An E&I Technician installs, maintains, troubleshoots, and repairs electrical and instrumentation systems to ensure safe and efficient operation in industrial settings.Key ResponsibilitiesInstallation and Configuration: Set up electrical and instrumentation systems, including PLCs, SCADA, VFD drives, motor controls, and HMI interfaces, according to industry standards and specifications .Maintenance and Calibration: Perform preventive and predictive maintenance, calibrate instruments, and maintain accurate records of inspections, repairs, and calibration activities .Troubleshooting and Repair: Diagnose malfunctions in electrical, electronic, mechanical, and pneumatic systems, determine root causes, and implement effective solutions .Testing and Performance Evaluation: Conduct tests to evalua

Kenner, LA 70062 • (38.3 miles) • Full Time • 9/30/2026

Shop ManagerAbout ConhagenConhagen is a leading provider of rotating equipment repair, maintenance, and machining services. We support customers across a variety of industries by delivering high-quality repair and manufacturing solutions that keep critical equipment operating safely and efficiently.Position Summary:The Shop Manager is responsible for overseeing the daily operations of the service shop, ensuring the efficient and high-quality repair, maintenance, and overhaul of rotating equipment. This role requires strong leadership to manage a team of technicians, maintain high safety and quality standards, and ensure customer satisfaction. The Shop Manager will drive operational excellence, manage resources effectively, and uphold the company’s commitment to superior service.Key Respons

Geismar, LA 70734 • (38.9 miles) • Full Time • 9/30/2026

About LEMOINE LEMOINE is a nationally recognized leader in Building Construction, Infrastructure, and Disaster Response, ranked among the ENR Top 400 Contractors. With a strong reputation for excellence and integrity, LEMOINE delivers complex, high-impact projects across the Gulf Coast and beyond.Our Program Services Division provides program management, construction oversight, and disaster recovery support for federal, state, and local clients-helping communities rebuild stronger and faster after natural disasters and large-scale events.Position SummaryThe Quality Inspector will play a key role in supporting the Program Services Division's mission by ensuring that all construction, repair, and mitigation projects meet LEMOINE's quality standards, contractual requirements, and applicable c

Metairie, LA 70001 • (42.4 miles) • Full Time • 9/30/2026

Full Job DescriptionOnly Apply If...You have worked in a fast-paced office setting and maintained long-term employment with the same company.You have at least one year of experience in Customer Service, Microsoft Office, Troubleshooting, and WellSky Scheduling Software.You can successfully pass both a criminal background check and a drug screening.Did You Say Yes?If so, we’d love to meet you! Click “Apply Now” to take the next step toward joining our BrightCare Home Care team.Your ScheduleMonday – Friday + PRN (as needed) WeekendsObjectiveThe Scheduler/Administrative Assistant plays a key role in supporting the daily operations of BrightCare Home Care. This individual provides administrative support to office staff, caregivers, and clients while helping ensure smooth scheduling and excepti

Saint Gabriel, LA 70776 • (44.2 miles) • Full Time • 9/30/2026

About Orbia Fluor & Energy Materials: You are purpose driven. Growth minded. Ready to stretch your potential. That’s the spirit of the community you will find at Orbia: where the purpose to advance life around the world drives our global team of over 23,000 every single day.From creating solutions to deliver clean water, secure food supplies and reliable information to steering material advances that power the future of green and smart cities, transportation, and healthcare, we never settle for “good enough” when there’s an opportunity to make life better. Where purpose comes to life, it changes lives. This is what we live for.MAIN PURPOSEThe Process Safety Management (PSM) Engineer is responsible for supporting, facilitating, and advancing the Process Safety Management program at the Orbi