New Orleans, LA 70123 • (42.5 miles) • Full Time • $70,000 / yr • 10/25/2026

About the Role We are looking for highly skilled and customer-focused Field Service Engineers to support our cutting-edge digital pathology systems in clinical environments. You will partner with healthcare professionals to ensure our equipment operates at peak performance, delivering reliable and accurate results. This role combines technical expertise, problem-solving skills, and exceptional customer service to maintain, install, and troubleshoot advanced medical instrumentation. Candidates must currently be located in one of these greater metro areas with potential travel to cover the broader surrounding regions: Memphis, TN Washington, DC New Orleans, LA What You'll Do • Perform Preventive & Corrective Maintenance - Schedule, execute, and document preventive maintenance and field

Luling, LA 70070 • (32.5 miles) • Full Time • 11/3/2026

Description: POWER UP YOUR CAREER WITH LOUISIANA CAT Louisiana Cat has been proud to represent Caterpillar® for 4 continuous generations in the state of Louisiana. We have been providing our customers with the highest quality Cat® equipment, service, and parts since 1933. We serve to build and power our community for a better future. We are always searching for high energy, ambitious candidates who are ready to join our team. You can build your future here! THE OPPORTUNITY We are looking for a RENTAL FIELD TECHNICIAN to join our growing operations (Louisiana Rents) at our St. Rose, Louisiana location. SALARY POTENTIAL 60,000 - $72,000 yearly range The yearly range indicated is representative of the hourly rate, including typical overtime. This range is based on a technician’s experience, s

Houma, LA 70363 • (0 miles) • Full Time • 11/1/2026

Job Title: Hydro-static Technician Reports To: Operations Manager Summary: Tests boilers, tanks, fittings, pipes, and similar objects to detect and locate leaks by performing the following duties. Essential Duties and Responsibilities: (Other duties may be assigned) Installs fittings on object to seal outlets and connects object to high pressure air or water line. Activates air compressor or water pump until gauge registers specified internal pressure. Observes gauge for loss of pressure indicative of leaks, and examines object for escaping air or water to detect leaks. Marks object at source of leaks for subsequent repair. Applies soap solution to surface of object or immerses object to facilitate location of air leaks. Tests object under high pressure to ensure compliance with product sa

Gray, LA 70359 • (12.7 miles) • Full Time • $18.00 to $26.00 / hr • 10/29/2026

Innovative Surface Prep (ISP) is a specialty contractor serving the onshore/offshore oil & gas and marine industries across the United States. As we expand our operations, we are looking for motivated individuals to join our team as Field Service Technicians. This is a hands-on opportunity to build a career in a high-demand field, work with cutting-edge equipment, and travel to unique job sites, including offshore locations. If you're dependable, safety-minded, and ready to grow with a company that values hard work and teamwork, we want to hear from you. Job Summary: The Field Service Technician is responsible for operating and maintaining ultra-high-pressure (UHP) water blasting equipment, including robotic-assisted systems, to perform precision surface preparation and material cleaning.

Houma, LA 70363 • (0 miles) • Full Time • 10/24/2026

Promotes excellent customer relations at the work site as you perform equipment rig up and rig down and prepare equipment for the job. Additional responsibilities include safe operation of frac assist equipment and the collection and distribution of data on the job. Assists in communicating the pre-job and on-the-job progress to customer. Job tasks, correctly performed, impact directly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Ability to work as part of a team and exercise tolerance and consistency when dealing with others. A passing score on job-related tests or meeting task guidelines is required. Capable of being deployed to any rig in the work area. Skills are typically acquired through successful comple

Houma, LA • (4.5 miles) • Full Time • 10/20/2026

NNW is a federally certified Woman-Owned Business Enterprise that is incorporated in Louisiana and serving clients in the Gulf of America, throughout the Gulf South, Pacific and international waters. With more than 40 years of experience in the oil and gas industry, we are proud of the team that we have built. Wellhead Service Technician will provide field service to customers by installing new wellhead systems and repairing or removing wellhead, production tree and frac equipment. Other services include testing, torquing and valve repair. Specific Responsibilities: Follow customer’s service order as dispatched by Shop Manager and/or Operations Manager. Receive, assemble/disassemble, test, install, remove and/or repair all makes and types of wellhead equipment. Properly diagnose wellhead a

Kenner, LA 70062 • (42.4 miles) • Full Time • 10/19/2026

Lead Field Technician About Conhagen Conhagen is a leading provider of rotating equipment repair, maintenance, and machining services. We support customers across a variety of industries by delivering high-quality repair and manufacturing solutions that keep critical equipment operating safely and efficiently. Position Summary Conhagen is seeking a Lead Field Technician to perform advanced field service activities involving the installation, inspection, troubleshooting, repair, and maintenance of rotating equipment at customer sites and within shop environments. This position provides technical leadership during field service activities by independently performing complex mechanical work, supporting job execution, mentoring technicians, and ensuring work is completed safely, efficiently, a

New Orleans, LA 70121 • (44.9 miles) • Full Time • $20.00 to $30.00 / hr • 10/16/2026

Benefits: Competitive salary Opportunity for advancement Training & development Benefits/Perks Medical insurance Dental insurance Vision insurance Vacation, paid time off Company-provided workwear, cell phone, tablet Company-paid training Additional Culligan Corporate Subject Matter Expert training offered Employee discounts for Culligan in-home products Eligibility for annual recognition and training meetings/events Comprehensive training provided. We will teach you everything you need to know to launch your career in the high-growth water treatment business! Culligan Water is seeking an individual to provide installation, service, and repair of Culligan products in homes and/or businesses. Our products include water softeners, drinking water systems and solutions for problem water. The s

Houma, LA 70363 • (0 miles) • Full Time • 10/11/2026

Job Type Full-time Description Stranco is a nationally recognized service and rental company with over 40 years of experience in and around the oil and gas industry. We are one of the leading providers in specialty services and equipment, which we provide in the upstream, midstream, and downstream markets. Our primary goal is to provide a safe working environment, while defining excellence through our quality work performance each and every day. Located in various project locations of Stranco Field Services LLC (headquartered in Houma, Louisiana) the Field Service Technician will be the hands-on provider of the main torqueing, bolting and testing services of all field projects as may be assigned. The successful Technician can work in a fast-paced industrial work environment while maintaini

Harahan, LA • (41.9 miles) • Full Time • 11/5/2026

Manufacturing Engineer Level 1 is an entry position in Supreme Integrated Technology’s Manufacturing Department. This role is responsible for coordinating with Director of Manufacturing, Design Engineering, and Manufacturing Department to develop and implement methods of manufacture for production jobs and any other special projects and to assist in communicating these requirements to production personnel. They will also work closely with QA/QC and Logistics to accept and organize material to be used in production in the most efficient ways possible. A general technical skill level centered around steel fabrication or machining is required to provide the expertise needed. A Manufacturing Engineer Level 1 would be expected to understand and anticipate fabrication issues and suggest methods

Morgan City, LA • (32.1 miles) • Full Time • $10.00 to $15.00 / hr • 11/4/2026

**Job Title: Facilities Engineer - Maintenance** **Job Summary:** We are seeking a skilled and detail-oriented Facilities Engineer - Maintenance to join our dynamic team. The ideal candidate will play a crucial role in ensuring the efficient operation, maintenance, and optimization of our facilities and infrastructure. You will be responsible for developing and implementing maintenance strategies, & managing projects. **Key Responsibilities:** - Develop and implement maintenance programs for all facility systems, including HVAC, plumbing, electrical, and structural components. - Conduct regular inspections of buildings and equipment to identify issues and determine maintenance priorities. - Collaborate with cross-functional teams to plan and execute facility upgrades, renovations, and impr

New Orleans, LA 70123 • (42.5 miles) • Full Time • 11/3/2026

Gibbs Construction is seeking a Project Engineer to join our team! We are looking for team players who are dedicated, organized, and effective. COMPANY DESCRIPTION Team Gibbs is a fun and dynamic group that aims to always do the right thing. We seek alignment with our industry partners through curiosity and clear communication. We are energetic and highly productive through a balanced approach to managing our time. Our sense of curiosity leads to continuous learning. Our team of builders has diverse backgrounds and is supported by great resources. We are committed to providing the tools, knowledge, and feedback to ensure that each employee develops as an individual and as a member of the organization. POSITION SUMMARY The Project Engineer (PE) is responsible for assisting the Project Manag

Waggaman, LA • (40.5 miles) • Full Time • $140,000 to $180,000 / yr • 11/2/2026

We’re looking for an experienced Process Controls Lead Engineer to serve as the plant’s go-to technical expert for industrial automation, process control, and control-system reliability. Reporting to the Maintenance and Engineering Manager, you’ll lead efforts to design, integrate, commission, troubleshoot, and improve the control systems that keep manufacturing operations running safely and efficiently. In this role, you’ll work across PLCs, DCS, HMI, SCADA, safety instrumented systems, and industrial instrumentation. You’ll lead complex controls projects, help resolve critical plant issues, and develop long-term strategies to improve safety, reliability, production capacity, energy efficiency, and overall plant performance. You’ll also play an important role in modernizing aging systems,

Avondale, LA • (40.9 miles) • Full Time • 10/31/2026

SWK Technologies is committed to providing superior technical support and technology solutions to clients both remotely and on-site. The Tier III Engineer serves as a senior technical resource responsible for resolving complex escalations, administering Microsoft Azure and infrastructure environments, and supporting the stability, security, and performance of client IT systems. This role combines advanced systems administration, networking, cloud technologies, cybersecurity, and hands-on troubleshooting. Key Responsibilities Provide walk-up, phone, and ticket-based technical support to end users. Serve as a senior escalation point for complex technical issues involving servers, networks, cloud services, endpoints, applications, and security. Administer Microsoft 365, Azure and Entra ID, in

Houma, LA 70360 • (7.9 miles) • Full Time • 10/31/2026

A maintenance engineer is responsible for: The maintenance of the hotel's building and grounds and the operation of its equipment and mechanical/electrical systems. Reviewing maintenance problems, complaints and work orders to prioritize and schedule work assignments. Monitoring and inspecting assigned work. Trouble-shooting, diagnosing and repairing malfunctioning electrical/mechanical systems and equipment. Inspecting property to identify potential and current needs. Planning and executing on-going appropriate maintenance programs. Estimating department expenditures for budget purposes and assisting with the capital budget process. Soliciting bids from contractors, evaluating their proposals and, once employed, ensuring work is completed to specifications. Coordinating with local health,

Gramercy, LA 70052-6301 • (37.7 miles) • Full Time • 10/31/2026

Description: Job Summary/Objective This role works closely with plant maintenance and operations to ensure compliance for pressure vessel integrity throughout the facility. This includes pressure relieve valve compliance and reliability assessments for piping and fixed vessels Essential Function •Serves as a lead site technical resource for piping systems, stationary equipment and pressure relief valve (PRV) compliance. •Leads efforts to ensure site practices & documentation are in compliance with PSM Mechanical Integrity standard •Works with Operations and Maintenance in the planning, scheduling, execution, and documentation of PRV, stationary equipment and piping inspections •Works with site maintenance team, inspectors, and contractors to ensure repairs are performed according to specif

Reserve, LA 70084 • (39.3 miles) • Full Time • $125,000 to $150,000 / yr • 10/31/2026

Senior Mechanical Design Engineer Reserve, LA (Headquarters) | Full-Time | $125,000 – $150,000+ About DSC DSC Dredge is the world’s leader in portable cutter suction dredges engineering and manufacturing equipment for aggregate mining and sand & gravel production, environmental remediation, coastal restoration, navigational maintenance, and marine construction across the U.S. and exports to more than 50 countries worldwide. We operate from our headquarters in Reserve, Louisiana and our manufacturing facility in Poplarville,Mississippi. The Role We are looking for a Senior Mechanical Design Engineer to take technical ownership of our most complex builds projects ranging from discrete components to fully customized dredge platforms exceeding $20M with manufacturing timelines spanning multipl

Saint Rose, LA 70087 • (39.8 miles) • Full Time • $69,000 to $85,000 / yr • 10/31/2026

Electrical Engineer (Hybrid/Onsite) Ready to Start Building Your Career? Graduating in December 2026 or May 2027 ? Bring what you've learned in the classroom to real projects at VAA. As an Entry-Level Electrical Engineer , you'll work alongside experienced engineers, contribute to meaningful client work and start building the technical and professional skills that will shape your career. You'll help design the electrical systems that keep complex commercial and industrial facilities powered, connected and running. Come ready to learn, contribute and grow. Your career is just getting started. Your Role Ready to take electrical engineering beyond the classroom? VAA's Electrical team designs power distribution and lighting systems for commercial buildings and industrial and agribusiness facil

New Orleans, LA 70121 • (44.9 miles) • Full Time • $15.00 to $20.00 / hr • 10/31/2026

Position Title: Laser Table Operator Employment Status: Full Time, Non-Exempt L ocation: Jefferson, LA (on-site) Pay Range: $15 - $20 Joval has been a family-owned Louisiana manufacturer since 1955. We combine craftsmanship and modern manufacturing practices to deliver consistent, high-quality products and exceptional customer service. We are a rapidly growing company with many growth opportunities. Role Summary Join Joval's manufacturing team as a Laser Table Operator. This is an excellent opportunity for the right candidate with at least 6-months experience working with a Plasma or Laser Table. Strong on-going training and advancement opportunities. Key Responsibilities Accurate operations of basic measuring equipment, including but not limited to: tape measure, caliper, and micrometer.

Houma, LA 70363 • (0 miles) • Full Time • 10/30/2026

Position Summary: Bordelon Marine is seeking a skilled and motivated USCG Licensed Engineer to join our offshore crew. The ideal candidate will have strong experience in diesel-electric propulsion systems , dynamic positioning (DP) vessels, and offshore operations. This role is critical to maintaining vessel safety, operational efficiency, and regulatory compliance. Responsibilities: Operate, maintain, and repair all onboard mechanical, electrical, and propulsion systems Ensure compliance with USCG regulations, company policies, and industry standards Perform routine inspections and preventative maintenance on all machinery and equipment Maintain detailed records of repairs, maintenance, and inventory Respond promptly and effectively to equipment malfunctions and emergencies Supervise and

Lockport, LA 70374 • (13.4 miles) • Full Time • 10/30/2026

Job Title: Electrical Designer Location: Lockport, LA Position Overview: An Electrical Designer uses research and experience to develop electrical designs and integrated drawings, model and extraction of product data into electrical production drawings. An Electrical Designer is expected to work with an Electrical Engineergroup in accomplishing departmental goals and objectives. Key Responsibilities: Performs review of electrical drawings to provide feedback on safety, function, and contract requirements. Develop and Maintain Integrated Cable Block Diagrams, Wiring Diagrams, Master Cable Schedule, and General Arrangements conforming to standard engineering design and customer specifications. Conducting field inspections to ensure installation compliance with design specifications. Reviews

Morgan City, LA 70380 • (29 miles) • Full Time • 10/30/2026

Project Engineer Location: Morgan City, LA Responsibilities and duties will include, but are not limited to: " Participate in project kick-off meetings to review schedule, build strategy, and project specific information. " Develop and maintain project Document Logs, Requirement Matrices and ensure proper distribution of Design Documents. " Perform field engineering tasks (e.g., as-built surveys, interference resolution, etc.) as required. " Write and review system/equipment specifications, perform systems/equipment and vendor evaluations. " Prepare, revise, and/or review technical manuals, engineering operating procedures, instructions, specifications, drawings, standards and documentation for cognizant equipment and systems. " Conduct design reviews and manage subcontract and internal en

Gramercy, LA 70052 • (38.4 miles) • Full Time • $65.00 to $85.00 / hr • 10/30/2026

On-Board Engineering is hiring an Electrical Engineer in Gramercy, LA! For immediate consideration please send your resume to Subject Line: Position Title and State you are Located Position Details: Position Type : Full Time Job Location : Gramercy, LA Benefits : Paid Vacation, Paid Holidays, Health Insurance, 401k, Life Insurance Compensation : $65 - $85/hr, depending on experience & qualifications Overview/Summary: We are seeking a highly motivated Electrical Engineer to join our Client's team. This role is critical to executing capital and improvement projects. The successful candidate will modify or create electrical and controls drawings, design control boxes and wire routing, create specifications for electrical and control components, and manage projects using the Front-End Loaded (

New Orleans, LA 70123 • (42.5 miles) • Full Time • 10/24/2026

Summary CIS Industries has built a reputation over its 20+ year history for creating an enjoyable and rewarding workplace. The company emphasizes stability, loyalty and a supportive culture. Join our growing team today! Roles & Responsibilities 1. Energy Auditing & Site Assessments Conduct detailed on-site energy audits of commercial and industrial HVAC systems. Evaluate existing Building Automation Systems (BAS/DDC) for operational efficiency and control strategy effectiveness. Identify deficiencies in sequences of operation, control loops, sensor accuracy, and equipment performance. Collect, trend, and analyze field data (temperatures, flows, pressures, run times, etc). Perform Level I–III ASHRAE energy audits as required. Document existing conditions and provide actionable recommendatio

Westwego, LA 70094 • (40.4 miles) • Full Time • 10/24/2026

SUMMARY OF POSITION: This role is responsible for providing production/process engineering support for the Utilities plant of a chemical manufacturing facility. This role will establish targets and drive to completion actions to reduce usage and energy consumption, improve yields, minimize waste and increase occupancy from a process engineering view while maintaining or improving safety and environmental compliance. MAJOR RESPONSIBILITIES: Monitor plant processes and product quality through daily observations, providing production and process engineering support for troubleshooting and issue resolution. Monitor plant operations, energy consumption, and material usage; provide process guidance to operators on production activities and operating conditions. Establish and maintain operating v

New Orleans, LA 70123 • (42.5 miles) • Full Time • 10/21/2026

Position Overview: The Sr. Mechanical Engineer will be responsible for the development and implementation of mechanical systems design (Systems Engineering, Mechanical Engineering, Piping Systems, Propulsion Systems, Machinery Systems) throughout the program lifecycle for assigned program(s). The Sr. Mechanical Engineer ensures the mechanical systems design meets technical, schedule, and cost objectives. Roles and Responsibilities The Sr. Mechanical Engineer is responsible for: · Responsible for the development system designs (Systems Engineering, Mechanical Engineer, Piping Systems, Propulsion Systems, Machinery Systems) for assigned program(s). · Develop specifications and design artifacts to achieve mechanical engineering deliverables such as drawings, procurement specifications, calcul

Des Allemands, LA • (24.9 miles) • Full Time • 10/16/2026

This job is posted on behalf of Advanced Technical Staffing Solutions by Top Echelon. ATSS has a client in Avondale, LA looking for Electrical Engineer 2. The Role: Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testi

New Orleans, LA 70123 • (42.5 miles) • Full Time • 10/16/2026

Overview At Universal Data our number one goal is to Create Raving Fans. The Cloud Engineer plays an important role in making this happen through advanced technical expertise, teamwork, and emphasis on putting the customers' needs first. The Cloud Engineer handles day to day support of cloud and hybrid infrastructure issues, serving as an escalation point, and assists in managing our contract client environments. Our business works with different organizations in various industries. As a Cloud Engineer, it is important that you can work with different cloud and hybrid technologies while being able to identify solutions that will improve our client's existing environment. The idea candidate for the Cloud Engineer position will possess exception technical and interpersonal skills, be highly

Golden Meadow, LA 70357 • (35.6 miles) • Full Time • 10/14/2026

Description: COMPANY OVERVIEW RCS believes in upholding the highest standards in the oilfield service industry. Following RCS’s core values of trust, commitment, and care, you will be responsible for working closely with the management team and staff to ensure that RCS is a safe and compliant workplace as well as representing the company in a professional manner. JOB SUMMARY The Field Service Engineer reports to the Operations Manager and must be familiar with a variety of the field’s concepts, practices and procedures. A wide degree of creativity and latitude is expected to help develop and create new services/products. This job description is a brief description of the job function. The Field Service Engineer is not limited to the job duties listed below and may be asked from time to tim

Gray, LA 70359 • (12.7 miles) • Full Time • 10/13/2026

Job Title: Drafter Location: Gray, LA Type: Direct Hire Compensation: $60,000 - $75,000 Work Model: Onsite – onsite Hours: 40.0 Responsibilities Create detailed 3D models, fabrication drawings, and installation drawings using SolidWorks or similar CAD software. Develop and maintain Bills of Materials (BOMs). Ensure designs meet engineering standards, customer requirements, and manufacturing needs. Collaborate with engineering, fabrication, and installation teams to support project execution. Review designs for accuracy and provide technical support during fabrication and installation. Assist with design reviews, troubleshooting, and continuous process improvements. Mentor junior designers and support technical documentation development. Qualifications 3+ years of experience in mechanical d

Golden Meadow, LA 70357 • (35.6 miles) • Full Time • 10/12/2026

Responsibilities Responsible for the efficient management of the engineering department and keeping the Master fully informed of the state of the machinery and equipment. Supervises and coordinates activities of crew engaged in operating, proper labeling, inspection, and maintaining propulsion engines, deck machinery, electrical refrigeration, and sanitary equipment. Report any shortcomings, inaccuracies, or conflicts in any portion of the MS to the Master Marine Functions Ensures paperwork requirements are met Understands procedures and is able to receive and pump all fluids and cargo Adhere to and comply with the company policies, USCG, and environmental regulations Works a rotation involving 12 hours in a 24-hour period with occasional hours not to exceed 14 consecutive hours Overhauls

Hahnville, LA 70057 • (34 miles) • Full Time • 10/10/2026

Position Summary The position is responsible for implementation and maintenance of the plant’s mechanical reliability program including scheduling, documentation and traceability, and procedure writing, management of the site’s PM programs, including documentation, and performing failure analysis on process equipment. Roles and Responsibilities Maintain the PM program and evaluate equipment before and after PM to determine issues, track the effectiveness of PM processes, and reconfigure existing processes to reduce downtime and maximize effectiveness Manages reliability improvement projects Perform failure analysis and development of recommendations to prevent reoccurrence and use failure analysis, and other types of root cause analysis in support of reliability Develop reliability test pl

Elmwood, LA • (43.4 miles) • Full Time • $45,000 to $90,000 / yr • 11/1/2026

Employment opportunity in New Orleans, LA (metropolitan area) ***Resume required for consideration .*** Opportunity for a full time position with a NEBB certified company in the specialized field of Testing, Adjusting, and Balancing (TAB) commercial mechanical systems as part of the Heating Ventilating and Air Conditioning (HVAC) service industry. This is not system installation or refrigerants. The individual performing TAB is engaged in the application of mechanical engineering for HVAC air and water systems with efforts towards achieving design values, meeting applicable standards, and providing solutions on a wide range of systems. This involves implementing methods and procedures using instruments and tools on various systems and equipment. This includes recording data, reading and in

Kenner, LA 70062 • (42.4 miles) • Full Time • 11/4/2026

Job Description: Intermediate Field Technician Organization: Conhagen Job Location: Kenner, LA. FLSA Status: Non- Exempt Pay: Hourly Base Pay Rate: 33/HR to 40/HR Job Summary The Intermediate Field Tech supports Conhagen’s Field Services Department by assembling, installing, inspecting, and repairing rotating equipment at customer sites. This role performs hands-on mechanical work with limited supervision, provides basic guidance to novice field techs, and helps troubleshoot common mechanical issues while maintaining strong safety and quality standards. Key Responsibilities Install, assemble, dismantle, and inspect rotating equipment using verbal and written instructions. Work with pumps, turbines, and related mechanical systems; perform basic repairs and component prep. Read and interpret

Reserve, LA 70084 • (39.3 miles) • Full Time • 10/24/2026

Electrical Engineer III Reserve, LA (Headquarters) | Full-Time | About DSC DSC Dredge is a world leader in portable cutter suction dredges engineering and manufacturing equipment for aggregate mining and sand & gravel production, environmental remediation, coastal restoration, navigational maintenance, and marine construction across the U.S. and exports to more than 50 countries worldwide. We operate from our headquarters in Reserve, Louisiana and our manufacturing facility in Poplarville, Mississippi. The Role DSC Dredge is seeking an experienced Electrical Engineer III to lead the electrical and automation engineering scope for complex, custom dredge projects from initial design through commissioning. This senior role owns industrial power distribution, motor control, instrumentation, el

New Orleans, LA 70123 • (42.5 miles) • Full Time • 10/24/2026

In this dynamic and rewarding position, you will play a key role in offering technical assistance for both internal staff and client users, covering infrastructure, networks, servers, and mobile devices. At CIS Technologies, we span various sectors, overseeing an extensive network of servers, desktops, and associated network hardware. Reporting to the Chief Operations Officer and collaborating closely with fellow IT professionals, you will have the tools necessary to execute your duties effectively. Key Responsibilities: Offer technical support to our clients' end users. Provide on-site assistance to clients in the greater New Orleans area, as required. Record all activities in our ticketing system and contribute to our knowledge base by documenting frequent issues and their solutions. Del

Houma, LA 70363 • (0 miles) • Full Time • $75,000 / yr • 10/24/2026

Prepares routine drafting projects, such as the preparation of various drawings of structures and equipment systems derived from layouts and sketches. Follows established technical specifications to prepare drawings and assists in design drafting. Consults with engineers regarding model accuracy, design, and drafting standards. Making modifications to existing designs or products, to improve them preform performance or to integrate new technology. Calculating various factors to ensure that the design will realistically be possible. Ensuring the intended product or structure will be safe, dependable and economically viable. Ability to work as part of a team and exercise tolerance and consistency when dealing with others. Ensure all OSHA regulated safety training is current. Promotes safety

Lockport, LA 70374 • (13.4 miles) • Full Time • 10/20/2026

Job Title:Mechanical Engineer Location:Lockport, LA Position Overview:An Mechanical Engineer is responsible for the design of a vessel’s propulsion and auxiliary systems, piping and HVAC. Key Responsibilities: Actively interfaces with other engineering disciplines and production departments Prepares purchase technical specifications Directs designers in the development of functional drawings Directs and coordinates activities involved in fabrication, operation, application, installation, and repair of mechanical or electromechanical products and systems for use onboard vessels Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application Guides personnel in fabrication of test control apparatus and equipment, a

Gramercy, LA 70052-6301 • (37.7 miles) • Full Time • 10/20/2026

Description: Maintenance-Mechanical Engineer *SUMMARY DUTIES AND RESPONSIBILITIES* Primary role is to provide maintenance / mechanical engineering technical expertise to plant Operations and Maintenance personnel on troubleshooting failures, repairs, getting equipment in functional condition and providing input to facility and equipment strategies. Essential Functions · Serves as a Subject Matter Expert (SME) in equipment failures and repair techniques during root cause investigations · Works closely with Maintenance Technology champions (internal or external) so that the jobs have both technical and field experience during troubleshooting, procedures, repair plans, etc. · Provides technical expertise to plant personnel on troubleshooting failures, repairs, and evaluating whether equipment

Des Allemands, LA • (24.9 miles) • Full Time • 10/16/2026

This job is posted on behalf of Advanced Technical Staffing Solutions by Top Echelon. ATSS has a client in Avondale, LA looking for Electrical Engineer 2. The Role: Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testi

Houma, LA 70363 • (0 miles) • Full Time • 10/15/2026

Position Overview: We are seeking an experienced Chief Engineer with a valid USCG license and a strong background in diesel-electric propulsion and dynamic positioning (DP) systems. This role requires a proactive leader who can manage all aspects of vessel engineering operations, ensure compliance with industry standards, and support our commitment to safe and efficient offshore operations. Key Responsibilities: Oversee and maintain all vessel mechanical, electrical, and hydraulic systems, with a focus on diesel-electric propulsion and DP systems. Ensure compliance with USCG, ABS, and ISM regulatory standards. Perform troubleshooting, diagnostics, and repairs on critical systems. Monitor engine performance and fuel efficiency to optimize vessel operations. Manage engineering crew, provide