FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Materials Compliance Engineers (MCEs) are responsible for ensuring that hardware products comply with global regulatory standards related to material composition. They collaborate with product managers, design engineers, and suppliers to inform them about applicable requirements. The MCE will oversee compliance throughout the product lifecycle, from initial releases to any subsequent changes.Key job responsibilities• Review and analyze change orders and bills of materials (BOMs) prior to drawing release • Work with part and material manufacturers to obtain full material disclosures (FMD), certificates of compliance (COC), laboratory testing reports and other requisite documentation• Review FMD, COC, and analytical reports for materials/parts/assemblies; analyze the data to evaluate compliance with relevant regulations • Complete bills of substances for new materials and evaluate existing materials against new regulations/regulated substances to ensure initial and continued compliance • Support the continuous improvement of the overall materials compliance strategy; document policies and procedures • Track status of multiple requests for changes and updates from Engineers; follow up to keep approvals process flowing• Communicate materials compliance requirements to manufacturers; request and collect manufacturer compliance data for product technical files• Enter large amounts of data in the form of certificates of compliance, material declarations, and laboratory test reports and use this data to evaluate compliance with relevant regulations About the teamThe Mechatronics and Sustainable Packaging (MSP) team builds full-stack innovation that ensures fulfillment and delivery network safety, speed, optimization, and value. We tackle big goals for the Amazon business and work hard to make automation history through invention, problem-solving, and highly-engaged teams. MSP is a global organization, with research and development labs based in Boston, MA and Brussels, Belgium. BASIC QUALIFICATIONS- Bachelor’s degree in Environmental Engineering, Environmental Sciences, Earth Sciences, Material Sciences, Chemical Engineering or equivalent related work experience- Working knowledge of RoHS Directive 2011/65/EU (RoHS2)- Working knowledge of REACH (REGULATION (EC) No 1907/2006)- Working Knowledge of the Waste Framework Directive (WFD) Substances of Concern in Products (SCIP) data base.- Working knowledge of California Proposition 65- Working knowledge of TSCA Reform BillPREFERRED QUALIFICATIONS- Knowledge of chemistry and compounds used in electrical and mechanical systems- Ability to read and interpret drawings.- Experience in high-speed, high-technology design/manufacturing environment- Proficiency with various PLM systems, specifically Compliance Modules- Well organized with good communication skills- Strong analytical/problem-solving skills and attention to detail- Self-motivated, goal oriented, task driven team player- Excellent oral and written communication skillsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a Methoding Processing Engineer! The Methoding Processing Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture!Essential Job Functions/Duties Communicate effectively with internal customers providing updates to progress against key milestones.Manage scrap reduction in the production operation.Design and simulate pattern rigging for new and existing product and create process techniques to produce and control the metallurgical and NDT integrity of the product.Develop and maintain operational sequences for part manufacture in conjunction with Administrative, Manufacturing, Quality, and NDT disciplines.Create and manage project timelines to move product through the shop, providing regular status updates to engineering and production management.Develop and manage BOMs and ensure accurate standard costs.Keep milestone updates and obtain agreements from internal customers.Troubleshooting in production processes related to Engineering.Create and maintain the documentation of work instructions and procedures for front end production processes.Work with shop floor personnel to provide an understanding of work instructions.Oversee NPI sampling process.Maintain engineering records of tooling, procedures, and customer drawings. QUALIFICATIONSRequired Qualifications: Education: Bachelor’s degree in engineering or related field requiredExperience: Required: 1+ years in a manufacturing setting. Plus: 2+ years in sand or investment casting foundry.Other Required Knowledge, Skills & Abilities: Attention to detail, ability to communicate at all levels of the organization, working knowledge of SolidWorks (or equivalent CAD software), MS Office Suite (Word, PowerPoint, Excel), ability to work with others through complex situations. CPP-Boston is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Boston, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. This is a full time position

JOB DESCRIPTION: Lead Process Engineer Burlington, MA, USA Poly6, an emerging leader in aerospace and defense innovation, is enabling production of complex turbine engine designs by combining additive manufacturing, advanced computation and material science. Our technology is uniquely suited to increase the efficiency of complex manufacturing processes as well as advance engineering design capabilities. Long term benefits of Poly6’s products include reduced greenhouse gas emissions for the aviation sector. You will have the opportunity to work alongside a highly talented team to solve problems in one of the world’s most complex engineering sectors: aviation. JOB SUMMARY Reporting to the Plant Engineering Manager, the Lead Process Engineer - Additive Manufacturing will be primarily focused on the process control and technical execution of additive manufacturing processes within the manufacturing facility in Burlington, MA, and secondarily to assist with technology transfer to a scaled greenfield manufacturing facility in Ohio. This position requires a strong working knowledge of process control, manufacturing, materials science, with strong investigational and root cause analysis skills. Specific job-related responsibilities include: RESPONSIBILITIES Lead the control and optimization of manufacturing processes, focusing on stability, statistical process control (SPC), and effective change management during scale-up. Maintain and analyze process parameters, connecting process inputs to product outputs to optimize control limits and enhance overall product quality. Understand and optimize material interactions with manufacturing processes to improve product performance and reliability. Measure and control Key Process Variables (KPVs), diagnosing and monitoring out-of-control events to ensure stable and predictable operations. Contribute to cross-functional projects aimed at process control, scrap reduction, and continuous improvement. Support root cause analyses for process non-compliances and ensure timely corrective actions. Help maintain robust process documentation, identifying and implementing opportunities for workflow improvements. Provide hands-on technical assistance, including repairing, improving, installing, maintaining, and validating manufacturing equipment. Collaborate cross-functionally on continuous improvement initiatives related to equipment implementation, cost reduction, and productivity enhancements. Support product engineering efforts by providing process analysis, data reporting, and recommendations. Standardize preventative maintenance systems and documentation for manufacturing equipment, ensuring adequate training for seamless handoff to operational counterparts. Offer rapid-response daily production support, including personnel training, data/scrap analyses, troubleshooting process problems, and performing equipment maintenance. Support Design of Experiments (DOEs) and trial execution to validate process improvements and changes, including participation in PFMEA and JSA initiatives as needed. Participate in special projects as assigned by management. QUALIFICATIONS Bachelor’s degree in Engineering (or related field) with 2-4 years of relevant experience, or 4+ years of equivalent experience in a manufacturing environment. Demonstrated experience in controlled manufacturing environments focusing on process control, process improvement, and operational excellence. Proficiency in applying SPC and DOE methodologies for process analysis and improvement. Working knowledge of statistical analysis software (e.g., Minitab, JMP) and advanced Microsoft Excel skills. At least 1 year of practical experience applying Six Sigma principles in manufacturing, with documented project successes. Hands-on experience with manufacturing equipment, processes, and related software tools. PREFERRED EXPERIENCE Experience with polymer or similar material applications in industrial manufacturing. Strong skills with the Microsoft Office suite. Excellent verbal and written communication abilities, with a track record of working effectively across engineering and operations teams. Hands-on experience operating, maintaining, and optimizing production processes, including familiarity with CAD models and related tools. Understanding of processes, systems, and technical aspects of scaled manufacturing operations. A data-driven mindset focused on driving innovation and improving process capability and efficiency. Six Sigma Green Belt or equivalent certification. Experience with control plans and data collection systems for process monitoring and reporting. Involvement in new process development and scale-up activities. Understanding of material interactions within manufacturing processes and the ability to optimize for improved performance. This position requires access to information protected under U.S. export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export laws without sponsorship for an export license. Poly6 is an equal opportunity employer. We do not discriminate based on age, color, genetic information, religion, sex, veteran status, or national origin. This is a non-management positionThis is a full time position

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is looking for a Robotics Applications Engineer to join our Perception team. You will play a hands-on role in the design and implementation of the next generation of perception software for our mobile robots. The qualified candidate will play a hands-on role helping to bring our robotics solutions to our customers. We are looking for people who thrive in a creative, collaborative and agile development environment.What we do Our work matters – robotics is transforming the world of commerce. Every day our intelligent robots are responsible for getting food and merchandise to thousands of stores across North America. We’re an industry changer – we created the first and only fully autonomous, end-to-end supply chain solution. Today, we are driving towards even bigger ideas – and we have the people, technology, and leadership to fully realize these aspirations. We have the excitement and ambition of a startup with the benefits and resources of a proven organization.What you’ll doCollaborate with internal and external stakeholders to understand technical and business requirements.Design, develop, and maintain high-quality robotics applications for internal users and external customers.Develop and integrate solutions across various modules, including web-based dashboards, database, and robotics control.Create, execute, and maintain comprehensive test plans; identify and fix bugs while ensuring the integrity of the existing codebase.Contribute to system-level software design, ensuring scalability, reliability, and performance.Formulate, document, and maintain detailed requirements specifications.Analyze requirements and develop innovative solutions or effective workarounds to meet project needs.Identify potential project risks and proactively suggest and implement mitigation strategies.Up to 10% travel may be requiredWhat you’ll needBachelor or master’s degree in Robotics, Engineering, Computer Science, or a related technical field.Minimum 8 years of professional software development experience with Python and/or C++.Experience in database development using Kafka and Snowflake.Experience in messaging systems such as RabbitMQ and/or ZeroMQHands-on experience with ROS, Docker and Linux environments.Strong problem-solving skills and attention to detail.Familiarity with robotics remote operation and control applications is a big plusExperience in developing web-based applicationsExperience with project management and collaboration tools like JIRA, Confluence.Exposure to agile development practices and CI/CD pipelines.Familiarity with graphical user interfaces (GUI) developmentKnowledge of computer vision applications and libraries.Our EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Overview: GovCIO is currently hiring for a Journeyman Unified Communications Deployment Engineer to provide telecommunications support to their local area, and travel around the US for unified communications deployment activities. This position is primarily located in Boston, MA and is an onsite position. Responsibilities: Performs a variety of electronic and technical assignments on data, telecom, and audiovisual communications equipment and systems. Completes endpoint troubleshooting using appropriate diagnostic equipment. Installs terminals, controllers, and test equipment and restores nonworking lines and/or equipment to working condition. Maintains liaison with outside vendors and orders circuits and/or equipment as required. Requires knowledge of specific hardware, test equipment, and terminal configuration. May develop recommendations for the combined usage of data processing and telephone system hardware and software.Conducts site surveys and meets contacts like clients, construction crew members, utility company personnel, and people from other departments within the Company.Installs, moves, commissions, and modifies audiovisual, telecommunications and related equipment according to job order specifications, standards, and procedures.Undertakes systems upgrades and answers queries related to system controls, and maintenance of the systems in general.Diagnoses equipment malfunctions. Maintains and repairs systems and equipment according to manufacturer recommendations and specifications.Reports and monitors service order changes.Be responsible for general local video operations and maintenance support as part of normal IT site support duties. This task does not include designing, engineering, specifying or acquiring video equipment. This support shall include basic troubleshooting of system problems and repairs, when they are identified by enterprise video support staff.Work with enterprise level voice and video engineers and technicians to conduct more detailed remote troubleshooting and repairs.Assist in setting up presentation devices and Video Conference units and provide basic troubleshooting support as needed. This includes ensuring functionality, being available for events, and shutting down video conferences.Perform local voice operations and maintenance support related to videoteleconferences. This support shall include basic troubleshooting of system problems and repairs whenthey are indicated by enterprise voice support staff. This task does not include designing, engineering,specifying or acquiring voice communications equipment.Provide on-call support by identifying, researching, and resolving technical problems received via the ServiceNow ticketing system.Interact with network services, software systems engineering, and/or applications development to restore service and/or identify and correct core problems. Perform routine system maintenance and analysis functions, including hardware configurations and adding, removing and replacing equipment components.Below is a non-comprehensive list of technologies that the technician may encounter. The ideal candidate will understand the purpose of these technologies and have some experience with them, or with equivalent technologies:Cisco IP audio and video endpoints, Unified Call Manager (CUCM), Expressway Meeting Server (CMS), Meeting Management (CMM), Telepresence Management Suite (TMS), Prime, and Identify Services Engine.Broadsoft CloudMicrosoft System Center Configuration Manager (SCCM)Avaya technologies including audio/video components, Communicator, One-X, Application Enablement Server (AES), and the following at version 6.0 or above: Communications Manager, Session/System Manager, and Aura Messaging.Polycom DMA, Real Presence, and endpointsSolarwindsSplunk (syslog)CyberArkICAM / Single Sign On methodologies (SSO) / CertificatesInfoBlox / AkamaiSIP routing, dial pattern and number translations, E.164 routing, PRI as well as standards-based codecs, to include codecs from Cisco and PolycomVideo Conferencing Services (VCS) infrastructureUnified Communications and Video conferencing, including but not limited to: Cisco Unified Communications Manager, Unity Connection, TEAMS, UCCX, Expressways, Jabber Client, SIP, H.323, and QoSSession Border Controllers (SBC), Cisco Unified Border Elements (CUBEs) Qualifications: High School with 0-3 years (or commensurate experience)Clearance Required: Must be able to obtain and hold a Public Trust ClearanceRequired Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesMust be prepared for regional travel up to 25% at customer locations.#NSS#NEON#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $70,000.00 - USD $70,000.00 /Yr.

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonus planPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities with outstanding internal resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out: Day in the Life of the Building of the Future https://youtu.be/pdZMNrDJviYWhat you will doOur Mechanical Engineer's responsibilities include but are not limited to: developing water-based fire protection products or system concepts and detailed designs, as directed; prototype generation and testing to international standards; conduct detailed studies to support design decisions; maintain records of design process in accordance with sound design practice and ISO requirements by performing duties directly or through subordinates when so directed.How you will do it:Analyzes product and equipment specifications to support decisions on initial design directionKeeps abreast of the company’s product offerings, within the area of involvement, to support decisions oninitial design directionMaintains a working knowledge of the company’s manufacturing operations to understand the strengths and weaknesses of design concepts from the point of view of manufacturability within the companyConducts feasibility, cost, optimization, stress, fluids, and thermal analysesProvides technical information concerning manufacturing and/or processing techniques, materials, properties, and process advantages and limitations which affect plant and product engineering planningKeeps abreast of the latest technology developments to ensure the company sees available opportunities for technical improvements in products and services and/or cost reductionsConfers with research personnel and other technical functions as required to clarify and resolve problems and develop designsMaintains a working knowledge of general industry and specific agency approval requirements, to ensurecompliance is maintained in designsPrepares and directs others in the preparation of design layouts, detailed drawings, and specificationsDirects and coordinates prototype effortsCompiles and analyzes operational, test, and research data to establish and/or evaluate performance standards and limits for new or existing productsPlans, develops, conducts and oversees experimental test programsPlans and holds meetings when appropriatePrepares and presents reports and presentations as neededPerforms all elements of the job in accordance with established procedures.What we look for:RequiredBachelor’s Degree from an accredited university and 5-10 years’ experience in mechanical engineering, fire protection engineering, or a related technical subject areaSelf-directed; able to strategize on test plans without established protocols; strong on-time and quality project deliveryAble to apply fundamental engineering theories, mathematics, mechanics, and physical science concepts to the jobDemonstrated ability to work in a team environment, good written and oral communications skills, flexibility, and adaptability to changing situationsAbility to write reports and convey detailed technical informationHigh attention to detail and solid organizational skill#LI-MJ1#LI-Onsite

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationAs a Lead Site Reliability Engineer (SRE) for BJ’s Wholesale Club’s digital team, you will play a critical role in ensuring the reliability, scalability, and performance of our digital platforms, including bjs. com, mobile apps, and in-club digital capabilities. Supporting the full lifecycle of digital experiences from order placement to fulfillment you will lead efforts to enhance system reliability, implement SRE best practices, and foster collaboration across teams. Key Responsibilities:Ensure Reliability and Scalability: Lead the design, deployment, and management of highly reliable and scalable systems for BJ's digital properties, including e-commerce platforms and mobile applications. Full-Stack Expertise: Responsible for analyzing and fixing issues for Java-based microservices, React applications, and respective backend servicesProactive Monitoring and Incident Response: Build and maintain monitoring systems using tools like New Relic, dataset, or similar to identify and resolve issues before they impact members. Collaboration and Leadership: Drive cross-functional collaboration with development and operations teams to align on goals for system performance and reliability. SRE Methodologies: Implement SRE principles to enhance service level objectives (SLOs), service level indicators (SLIs), and ensure a seamless customer experience. Automation and Optimization: Automate repetitive tasks and optimize workflows to improve operational efficiency and reduce toil. Incident Management: Lead root cause analyses for critical production incidents, generating detailed RCA reports and driving actions to prevent recurrence. Change Management: Ensure reliable deployments by following structured change management processes and leveraging version control systems. Security and Compliance: Collaborate with security teams to ensure systems and applications meet stringent security standards. Qualifications:Educational Background: Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience). Experience: At least 6+ years in SRE or related roles, with experience in large-scale e-commerce or digital platforms. Technical Skills:Strong hands-on knowledge of Java-based microservices and APIs. Proficiency in observability tools (e. g., New Relic, Splunk). Hands-on experience with automation scripts (Bash, Python). Experience with change management tools like terraform etcKnowledge in CI/CD, containerization (e. g., Docker, Kubernetes), and cloud technologies. Soft Skills:Exceptional communication skills to work effectively with cross-functional teams and leadership. Strong analytical and problem-solving abilities. Demonstrated ability to learn and adapt to new tools and technologies quickly. Job Conditions:Collaborate within a dynamic and innovative team environment. Participate and initiate cross-training and knowledge-sharing initiatives. Be part of an escalation on-call rotation to provide 24/7 support for critical systems and lead team during critical issues. This is a hybrid role. Tuesday through Thursday are in-office days at BJ's Club Support Center in Marlborough, MA and Monday and Friday are remote days. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $109,000.00.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a QualityEngineer! The Quality Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture! Major Responsibilities Coordinate with our customer’s Engineering, Quality, and Purchasing representatives, suppliers, and all departments and levels of CPP workforce providing, on a tactical level the technical support and the direction necessary to ensure compliance with the intent of customer quality expectations.Build an atmosphere of competence, cooperation and trust with customer representatives via Supplier Product, Systems and Qualification Surveys.Take active participation in our Continuous Improvement efforts, promote quality excellence, and encourage teamwork among ourselves and our customers.Be proactive, innovative, and creative using judgment and decision making in the implementation of necessary quality programs. Qualifications Bachelor’s degree from four-year college or university in Engineering or a related field; or one to two years related experience and/or training; or equivalent combination of education and experience.Must have a comprehensive knowledge of quality and quality systems, such as AS9100 orNADCAP.3 - 5 years of work experience in an foundry or related fieldFamiliarity with the investment casting industry and related processes is desirableStrong communication skills, good PC skills, program management skillsKnowledge of Six Sigma and Lean Manufacturing a plusAble to work independently with minimal directions Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This is a non-management positionThis is a full time position

JOB DESCRIPTION: MANAGER, MANUFACTURING ENGINEERING Burlington, MA, USA Poly6 is enabling production of complex turbine engine designs by combining additive manufacturing with advanced materials. Our technology is uniquely suited to both increase the efficiency of complex manufacturing processes and advance engineering design capabilities, while achieving the long-term benefit of reducing greenhouse gas emissions. You will have the opportunity to work alongside a highly talented team to solve problems in one of the world's most complex engineering industries: aviation. JOB SUMMARY The Manufacturing Engineering Manager, reporting directly to the Plant Manager, is a dynamic technical leader responsible for overseeing a team of engineers. This role is accountable for driving continuous improvement in process capability, operational efficiency, and cost productivity within manufacturing operations, while ensuring that safety is integral to the DNA of the engineering team. The manager ensures the development and maintenance of reliable, predictable production processes that align with the company's ambitious growth strategy, including multi-site expansion and achieving a 20X increase in production volume over the next five years. RESPONSIBILITIES • Lead and develop the engineering team, providing leadership, mentorship, and development opportunities to ensure a high-performing and engaged workforce. • Oversee all production processes, including the creation, maintenance, and improvement of process documentation, ensuring adherence to quality and regulatory standards. • Implement and maintain best practices to enhance workplace safety across all manufacturing operations. • Improve yield, process capability, efficiency, capacity, and cost-effectiveness to meet production and business goals. • Develop, procure, install, validate, and support new manufacturing equipment and processes to support production demands and innovation. • Collaborate with cross-functional teams to scale new processes from prototype to full production. • Serve as the technical lead for knowledge transfer and standardization in support of a multi-site expansion project. • Develop and execute a vision for multi-site team expansion and ongoing execution. • Partner with facilities and maintenance teams to ensure seamless integration of manufacturing equipment and processes. • Define, measure & control KPVs, correlating to, and measuring against, product requirements. • Track business key performance indicators (KPIs) related to safety, quality, delivery, productivity, and cost, providing regular updates to leadership. • Champion Lean, Six Sigma, and other continuous improvement methodologies to enhance production processes and overall operational efficiency. • Work closely with R&D, quality, supply chain, and operations teams to align engineering initiatives with business objectives. QUALIFICATIONS • B.S. with 7-10 years' experience, or 12+ years' experience in a related field including chemical processing, injection molding, 3D printing, or ceramics manufacturing. • Minimum of 5 years' experience in an ISO 9001 or similar production manufacturing environment. • Minimum of 3 years' experience in a Fixed Process environment, preferably aerospace. • 5+ years' experience in engineering people management. • Proficiency in management of operational and quality metrics like OEE, yield, process capability. • Proficiency in Minitab, JMP or SAS engineering analysis tools. • Six Sigma Green Belt and 3+ years' applied Six Sigma engineering experience or 5+ years' applied Six Sigma engineering experience. • Experience managing across various TRL and MRL levels, with demonstrated capability for multi-site technology transfer. PREFERRED EXPERIENCE • Advanced proficiency in Minitab, JMP, or SAS engineering analysis tools. • 5+ years' experience in ceramic core for aerospace casting. • Six Sigma Black Belt. This position requires access to information protected under U.S. export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these US export laws without sponsorship for an export license. Poly6 is an equal opportunity employer. We do nThis is a management positionThis is a full time position