Westfield, MA • (36.5 miles) • Full Time • 9/18/2026

Westfield Electroplating Company Inc. (WEPCO) is seekingQuality Engineersto support our Quality Department. WEPCO Quality engineers are responsible for developing, implementing, and maintaining standards and procedures to comply with aerospace quality system requirements. Skills/ RequirementsAttention to detail:WEPCO Quality Engineers must have the ability to see the fine details in the myriad of data presented to them. Separate the important from the unimportantAnalysis/Critical thinking/Problem-solving skills:WEPCO Quality Engineers may be asked to participate in root cause analysis, create process maps, use tools such as PFMEA to find the trouble spots and propose plans to correct themCommunication skills:WEPCO Quality Engineers must be able to communicate current and future requirement

Worcester, MA • (39.3 miles) • Full Time • 9/18/2026

TITLE: CQV Engineer w/MEP CommissioningPAY: 45-50/hr W2 (C2C would be $50-55/hr)DURATION: 4-6 monthsLOCATION: Worcester MA (ONSITE please)When you submit, please make sure to qualify them based on the below highlighted skills - along with each candidate’s rate (W2/C2C), availability, and confirmation of local availabilityKey Requirements:3–5 years of overall CQV experience is acceptable.Must have hands-on electrical commissioning experience and a strong understanding of what should be included in commissioning and testing protocols.Must be able to understand the testing performed by electrical subcontractors and witness and verify the testing activities.Experience with HVAC commissioning is required.MEP (Mechanical, Electrical, and Plumbing) commissioning experience is preferred.Pharmaceut

Worcester, MA • (39.3 miles) • Full Time • 9/18/2026

We are looking to hire an experienced AUTOCAD Engineering designer/draftsperson for innovative, national wastewater engineering firm.QualificationsExperienced with AUTOCAD Civil 3Dmechanical piping and engineering design standards for wastewater and water systems requiredAssociate or Civil engineering degree preferred.Why UsSalary range $75,000 to $125,000 ( Depends on Experience)plus benfitsflexible hours hybrid office-remote availablePlease send resume and representative examples of work.\nCompany DescriptionLAI provides a wide range of services, including engineering feasibility studies, traditional engineering services of planning, design and construction engineering, and the turnkey services of designing and operating wastewater and water facilities. Among our areas of nationally reco

Palmer, MA • (29.6 miles) • Full Time • 9/17/2026

Summary: Palmer Foundry is seeking a hands-on Maintenance Engineer to support the reliability, availability, and continuous improvement of our foundry equipment and facility systems. This position is responsible for developing and improving preventive maintenance programs, troubleshooting equipment failures, leading root-cause analysis, coordinating major maintenance activities, and driving improvements in equipment reliability and uptime.The Maintenance Engineer will work closely with Production, Quality, Engineering, and Environmental, Health & Safety (EHS) to ensure equipment and facility systems operate safely, reliably, and efficiently. The ideal candidate combines strong mechanical and electrical troubleshooting skills with a practical, data-driven approach to equipment reliability a

Springfield, MA 01103 • (35.7 miles) • Full Time • 9/17/2026

As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilities

Westfield, MA 01085 • (35.9 miles) • Full Time • 9/16/2026

Normal Work Schedule:Hours of Work: Variable.Days of Work: Variable.Note: The hours of work are established as needed by operations and at the direction of management and are subject to change by management as required.DUTIES AND RESPONSIBILITIESPosition will work as both a locomotive engineer and conductor as needed.Inspect locomotive for operational readiness by making FRA- and company-required checks and tests.Receive train consist, which provides the physical makeup of train and includes weights, lengths, location of loads and empties, and cars requiring special handling.Apply knowledge of territory, including terrain, grades, curves, and grade crossings, in order to give prescribed warning signals and to otherwise operate the train in a safe manner.Conducts the movement of rail cars a

Northampton, MA • (23.1 miles) • Full Time • 9/16/2026

Zulu Pods is building the critical infrastructure behind expendable and attritable platforms, and we are seeking highly motivated team players to join us in this mission.At Zulu Pods, weoperate withIntegrity,takeExtreme Ownership,lift each other up withServant Leadership,win byExceeding Expectations, andsucceed withOptimistic Vision.If these values describe you, please continue:We are seeking an experienced Manufacturing Engineer to join our team. The ideal candidate will have a strong background in machining precision components in the aerospace industry, with proficiency in MasterCAM and CNC toolpath generation for lathe and milling operations. You will be responsible for interpreting complex engineering drawings and CAD, programming toolpaths, and ensuring that all toolpaths will create

Easthampton, MA 01027 • (26.9 miles) • Full Time • 9/16/2026

Benefits:Profit Sharing PlanDisability InsuranceFSA for Medical/Child CareLife InsuranceHealth insurancePaid time off401(k)Dental insuranceJoin our Team: We are seeking an experienced and detail-oriented Architectural Panel CNC Programmer to join our team. The ideal candidate will have experience with CNC programming, CAD drafting, or both, and possess strong visualization, spatial reasoning, and problem-solving skills. This position plays a critical role in transforming architectural drawings and fabrication details into accurate CNC programs for the production of custom architectural panel systems. Job Description: The Architectural Panel CNC Programmer is responsible for reviewing project drawings, creating fabrication layouts, generating CNC programs, and supporting production operatio

Chicopee, MA 01013 • (32.2 miles) • Full Time • 9/15/2026

Notch Mechanical Constructors is looking for an experienced Mechanical Engineer - Energy/HVAC/Thermal Fluid Focus to join our growing team! This specific department is team oriented and works together extremely well. They enjoy our core values of "Working as Team" "Meeting the Challenge" and so on! If you have a wealth of experience as a Field Project Engineer we encourage you to apply!Position Highlights:Provide engineering design and layout for a variety of mechanical piping systems, including building mechanical systems (HVAC, plumbing, etc.) and plant utility systems (steam, chilled water, cooling water, compressed air, etc.). Provide technical direction and support in a variety of engineering, technical, estimating & cost activities. Provide technical engineering information to engine

Springfield, MA 01104 • (33.5 miles) • Full Time • 9/15/2026

Looking to level up your career and boost your income? At Voyage Healthcare, we help connect nurses, therapists, and allied health pros with high-paying travel jobs at top-rated facilities across the U.S. With thousands of openings nationwide, you can earn up to $3,500+ per week (depending on your specialty, location, housing, and benefits)all while making a real impact on the communities that need you most. Let your next adventure start with us!Position: ALLIED-X-Ray Tech (Travel/Contract)We're hiring experienced ALLIED-X-Ray Tech for a 13-week contract in Springfield, Massachusetts earn up to ($2089 - $2199 per week) while providing essential care at a leading facility. Most candidates will need to have at least 2 years of recent experience in the specialty.Apply & Call us today at for d

Leominster, MA 01453 • (34.3 miles) • Full Time • 9/15/2026

Field Technician Work With Somewhere to GoOn-Site Health & Safety places a trained Field Technician on industrial worksites construction, refineries, plants to handle injury response, health screenings, and incident documentation. Tuition assistance and paid in-house training let you add certifications while you're on the clock, and we operate in more than 20 states if you want to move.Why this roleTuition assistance, plus paid in-house training and a pathway to phlebotomy certification.Internal promotion and career advancement add credentials and move up without leaving the company.Extra shifts, uncapped. PRN is open to every position and extra shifts pay a bonus on top of your hourly.20+ states, with internal transfer as your career moves.No commute. A company vehicle comes home with you

Enfield, CT 06082 • (43.6 miles) • Full Time • 9/15/2026

The CMM Programmer is responsible for programming, proving out and supporting coordinate measuring machine (CMM) inspections on critical aerospace components in accordance with customer and internal specifications. This role will independently execute CMM programs to communicated NPI and daily production milestones. Programming capability (MCOSMOS) is required for this role. Programming capability (Calypso and/or Modus) is highly desirable. The programmer will interface closely with quality, engineering, production, and manufacturing support teams to ensure timely inspection flow and accurate data collection.The CMM Programmer is responsible for generating and proving out CMM programs for Mitutoyo, Zeiss, and Metris CMMs to perform dimensional inspections on aerospace components. This incl

Suffield, CT 06078 • (44.2 miles) • Full Time • 9/15/2026

LiquidPiston This role is fully onsite in Bloomfield, CT, five days per week, and the company will be relocating to Suffield, CT later in 2026. About LiquidPistonLiquidPiston (LPI) is revolutionizing the internal combustion engine. Our patented High Efficiency Hybrid Cycle (HEHC) and rotary X-engine platform enable compact, ultra-efficient, and power-dense engines for hybrid, aerospace, and power generation applications. We are a mission-driven team of innovators determined to push the boundaries of energy and propulsion.Position Overview We are seeking talented and motivated Engine Design Engineers to join our growing team. In this role, you will be at the forefront of developing groundbreaking engine systems and componentsfrom initial concept through prototyping, validation, and producti

West Springfield, MA • (35.2 miles) • Full Time • 9/14/2026

Part-Time Field Service Technician – ATMs & Digital SignageNew England ATM / DigisignzWest Springfield, Massachusetts$19–$22 per hour, plus performance bonusesApproximately 20–25 hours per weekNew England ATM and Digisignz are seeking a dependable, mechanically inclined Part-Time Field Service Technician to install, maintain, and troubleshoot ATMs and digital-signage equipment throughout New England.This is a hands-on field position for someone who enjoys working independently, solving technical problems, driving to customer locations, and interacting professionally with business owners and managers.Saturday availability is required. Occasional Sunday availability is also required. Weekday hours and routes will vary depending on service needs and scheduled installations.ResponsibilitiesIns

West Boylston, MA • (36.7 miles) • Full Time • 9/14/2026

PRIMARY PURPOSE: To design, develop, and document new products from concept through engineering release to production.NATURE OF WORK: Reporting to the Design Engineering Manager, this position exercises discretionary decision making. This is a fast-paced working environment with typical projects going from concept to production in 6 months or less. The position requires a strong ability to work under pressure and excellent time management skills, as the candidate will often have to balance many tasks with competing deadlines.Curtis product lines include cab enclosures for sub-compact tractors, UTV’s and golf cars, as well as tractor attachments, and snow removal equipment such as snow plows and spreaders. The ideal candidate will have an interest in areas such as outdoor power equipment an

Charlton, MA 01507 • (40.2 miles) • Full Time • 9/12/2026

This position is a DIRECT HIRE ROLE from day oneThe ideal candidate will have hands-on experience operating and programming CNC lathes and/or milling machines, working with a variety of metals, and interpreting technical drawings and blueprintsResponsibilitiesSet up, program, and operate CNC lathes and/or milling machines.Manufacture machined tooling and machined weldments to specifications.Work with aluminum, stainless steel, and carbon steel materials.Read and interpret blueprints, sketches, and engineering drawings.Perform inspections using precision measuring instruments, including calipers, verniers, and micrometers.Ensure parts meet quality and dimensional requirements.Troubleshoot machining issues and make programming or setup adjustments as needed.QualificationsPrevious experience

Pittsfield, MA • (43.7 miles) • Full Time • 9/12/2026

Summary:Designs harsh-environment connectors, cable assemblies, and hull penetrators for subsea applications, taking products from concept through production-ready designs.Key ResponsibilitiesDesign complex products for harsh subsea environments.Develop concepts, prototypes, drawings, and production documentation.Collaborate with customers, Quality, Purchasing, Engineering, and Manufacturing.Support initial product builds, tooling, and manufacturing processes.Maintain product drawings and assembly instructions using engineering and MRP software.QualificationsBachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.3+ years of design engineering experience preferred.Strong SOLIDWORKS 3D CAD, 2D drafting, and mechanical design skills.Strong communication, organiz

Enfield, CT • (43.6 miles) • Full Time • 9/11/2026

Quality Engineer - FAIREnfield, CT, USAWhat You will Do:Primary: ReviewQuality requirementsof aero-engine components. Plan and prepare build of a regulatory based and compliant “First ArticleInspectionReport (FAIR)” supplier package for OEM acceptance. Work as per the requirements of AS9102-Rev C and associated customer procedures.Primary: “Balloon” engineer drawings (DISCUSsoftware) to capture required qualityinspectionpoints. Determine/verify proper gaging equipment to use it to perform inspections – a part of the FAIR package.Inspectionwill include both dimensional and visual reviews using both manual and advanced gages / equipment.Inspectiontools must be verified for calibration and proper functionality before used. Create or gather and verify all other quality supporting documents (te

Fitchburg, MA 01420 • (31.2 miles) • Full Time • 9/11/2026

Senior CMM Programmer (PC-DMIS) / MetrologistFitchburg, MA$40.00 - $62.50 per hour, overtime opportunities may be availableFlexible Schedule Options Available | Full-Time or Part-TimePut Your PC-DMIS Expertise to Work in a High-Impact RoleMicron Solutions is seeking an experienced Senior CMM Programmer (PC-DMIS) / Metrologist to support our quality assurance and metrology functions. This role is ideal for a highly skilled metrology professional who enjoys solving complex measurement challenges, developing advanced inspection programs, and working closely with Engineering, Manufacturing, and Quality teams.We're looking for a PC-DMIS programmer and metrology expert, not just a CMM operator. In this role, you'll serve as a key technical resource, helping ensure product quality while driving c

West Boylston, MA • (36.7 miles) • Full Time • 9/11/2026

Development Engineering Technician - Hiring Levels I & II We are seekingDevelopment Engineering Technicians at level I & IIto support product development initiatives in a hands-on engineering environment. This role partners closely with engineering teams to build, test, troubleshoot, and refine electromechanical prototype systems and test equipment. This position is ideal for someone with strong mechanical and electrical aptitude who thrives in a fast-paced development setting and can work both independently and collaboratively. Key ResponsibilitiesBuilds, tests, troubleshoots, repairs, and modifies electrical and mechanical prototype systems with engineering-level documentation and / or verbal instructions applying sound engineering technician practices including maintaining of lab notebo

Lunenburg, MA • (36.1 miles) • Full Time • 9/9/2026

Dillis & Roy Civil Design Group, Inc. is a consulting Civil Engineering, Land Surveying and Wetland firm serving Central and Eastern Massachusetts. We are currently looking to fill the following position in our Lunenburg location.Civil Engineer: Dillis & Roy is seeking a Civil Engineer to support Land Development projects in Central and Eastern Massachusetts. A BS in Civil Engineering is required with at least 2 years of experience in land development and site design. Candidates should have an EIT and be on track to prepare for the Professional Engineer (PE) registration exam. Proficiency with AutoCAD is required. Experience with utility design, grading and drainage design, site plan and subdivision plan preparation, Title 5 regulations, the Wetland Protection Act, Massachusetts Stormwater

Milford, NH • (41 miles) • Full Time • 9/9/2026

manufacturing engineer working in a machine shop knowing machining, N/C programing in Mastercam, solid works, open mind ( 5 axis programming ) writing job methods for turning,milling VTL's, we do large work 5000 lbs or more using over head cranes welding and fabricating, 650 ton press break, fancy geometry, waterjettingmostly prototypes, machining & fabricating stainless steels ( vacuum chambers )web page hollisline.com\nCompany Descriptionwe help customers develop new machines for the futureCompany Descriptionwe help customers develop new machines for the future

Springfield, MA 01001 • (39 miles) • Full Time • 9/8/2026

Tired of the day to day grind of the construction site? This is a highly unique opportunity to continue to participate in the construction planning of large and complicated projects without the standard job site commitments and time requirements, allowing for a reasonable work schedule along workload flexibility.This position will be on the front line of the evolving construction planning and project controls industry, working on major contracts with a diversified client field of established construction firms. As our operations have grown we are looking for a Project Engineer / Scheduler with 1-5 years of engineering/construction experience to join our team. Experience with scheduling programs (Primavera P6) is a plus. This person will work with our senior level staff to provide schedulin

Devens, MA • (41.7 miles) • Full Time • 9/8/2026

JOB DESCRIPTION:Must Haves:• Associate degree required, or 1-3 years of relevant experience in a cGMP-regulated biotechnology or pharmaceutical manufacturing environment, or a related scientific or engineering field.• Must have the ability to work as a self-starter and manage multiple priorities in a dynamic, cross-functional, team-based environment.• High proficiency required in Microsoft Office applications, especially Word, Excel and PowerPoint.--Job Title: Manufacturing - Business Operations AssociateContingent Worker’s Work Location: Devens, MASupplier Note: Hello Everyone, manager requested additional resumes, she has provided feedback that she needs candidates to have more Manufacturing Operations experience and not primarily QC-focused experience. as this role will work closely wit

Springfield, MA • (34.5 miles) • Full Time • 9/7/2026

Company Description Titeflex is a global leader in creating and adapting fluid and gas management products and quality programs, Titeflex expertise can be traced to its aerospace roots at the dawning of the space age. We provided solutions and service for demanding fluid and gas transfer requirements, whether the media be corrosive, caustic or combustible, under extreme pressure, temperature and flexing conditions. Primary markets include aerospace, chemical, petro-chemical, pulp and paper, petroleum equipment, heavy equipment, compressed gas, automotive, refrigeration, transportation, data centers, and dozens of other niche markets. Titeflex’s background and experience in stringent and demanding hose requirements plays into the strengths of our applications engineers. We are able to assim

Holyoke, MA • (29.4 miles) • Full Time • 9/6/2026

About the RoleWe are hiring a Controls & Automation Engineer to own, program, commission, and operate the NOA-20 pilot anaerobic digester system.This is not a support role.You are responsible for taking an uncommissioned pilot system and delivering stable, continuously operating infrastructure. You will own the controls stack end-to-endfrom first power-on through live biological operationand prepare the system for replication at municipal scale.If you are looking to design in theory and hand off execution, this is not the role.If you want system ownership and real-world impact, read on.General Purpose of Job (Non-Negotiable)The Controls & Automation Engineer is responsible for programming, commissioning, and operating the NOA-20 pilot anaerobic digester, including all control logic, sensor

Springfield, MA 01001 • (39 miles) • Full Time • 9/5/2026

Job Description – Manufacturing Engineer – CNC Programming & Job ProcessingOur Company Parts Tool & Die is a precision manufacturer focused on complex, tight-tolerance work. We value quality, accountability, disciplined execution, and continuous improvement. Position Summary Parts Tool & Die is actively seeking a Manufacturing Engineer – CNC Programming & Job Processing who thrives on precision and consistency. This role is for someone who enjoys technical detail, works well across departments, and values process, structure, and clear expectations. The Manufacturing Engineer supports CNC milling and turning by preparing production-ready programs, routers, setup documentation, tooling information, models, and job packages. You’ll be the person we count on to make sure assigned work is proce

Milford, NH 03055 • (41 miles) • Full Time • 9/4/2026

Are you detail-oriented, technically skilled, and passionate about producing high-quality survey drawings? We're looking for a Survey Technician/Drafter to join our team and help transform field data into accurate, professional survey deliverables.What You'll Do· Prepare boundary, topographic, ALTA/NSPS, subdivision, and construction survey drawings.· Process and draft survey data using Carlson software.· Create plats, legal descriptions, easement exhibits, and record drawings.· Work closely with survey crews and project managers to ensure accuracy and efficiency.· Research deeds, plats, and public records as needed.\nCompany DescriptionFieldstone Land Consultants (FLC) is a family friendly, multi-disciplinary firm with over 15 years in business located in Milford and Keene, NH. We provide

Oxford, MA • (43.8 miles) • Full Time • 9/4/2026

IPG Photonics is revolutionizing the laser industry as the pioneering developer and leading producer of fiber lasers and amplifiers. Headquartered in Marlborough, MA, IPG has over 4,800 employees in more than 30 locations around the world. We aspire to work together with our employees and customers to apply light in ways that improve life.Our mission is to develop innovative laser solutions to make the world a better place. To accomplish this mission, we are committed to attracting and retaining the best talent and an engaged and thriving workforce that drives a sustainable future for our company and society.Working at IPG Photonics you can expect challenging projects, a motivating and friendly environment, and competitive benefits.Job Summary:This position requires the skills and experien

Fitchburg, MA • (31.2 miles) • Full Time • 9/4/2026

Senior CMM Programmer (PC-DMIS) / Metrologistfitchburg, MA 01420 Senior CMM Programmer (PC-DMIS) / MetrologistPut Your PC-DMIS Expertise to Work in a High-Impact RoleMicron Solutions is seeking an experienced Senior CMM Programmer (PC-DMIS) / Metrologist to support our quality assurance and metrology functions. This role is ideal for a highly skilled metrology professional who enjoys solving complex measurement challenges, developing advanced inspection programs, and working closely with Engineering, Manufacturing, and Quality teams.We're looking for a PC-DMIS programmer and metrology expert, not just a CMM operator. In this role, you'll serve as a key technical resource, helping ensure product quality while driving continuous improvement across a diverse mix of precision-machined, injecti

Staffordville, CT 06077 • (43.2 miles) • Full Time • 9/4/2026

NATURE OF WORKThis is highly responsible professional engineering and supervisory work in planning, organizing, supervising and performing engineering services in the design, construction and inspection of public works projects and facilities. Work also involves reviewing and making recommendations on proposed private land developments and infrastructure work; and providing engineering consultation to all Town departments, boards, commissions and residents.An essential part of the duties of this position is assisting in developing a flexible and anticipatory organization which will provide cost-effective and customer-friendly delivery of quality services to the community; plus assisting in developing and utilizing the potential of each employee to successfully find new ways to deliver both

Springfield, MA • (34.5 miles) • Full Time • 9/3/2026

DescriptionCreativity. Innovation. A desire to effect positive change. That’s what it takes to work at Fuss & O’Neill – because that’s what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life. Quality of life is also important on the job, so we’ve prioritized work-life balance by offering flexible/remote work opportunities, part-time benefits, and generous PTO. We believe that each day is an opportunity to support one another, to support our clients, and to support our communities. If you feel the same, then you’ve found your future.We are seeking a Senior Water Resources / Senior Dam Engineer to join our growing Water Resources team. This is a newly created role driven by a significant and expanding portfolio o

Pittsfield, MA • (43.7 miles) • Full Time • 9/3/2026

Job Title: Manufacturing Engineer Location: Pittsfield, MA (Hybrid-Remote after initial 90 days) Pay: $80,000 - $110,000 per year Job Type: Full-Time | Engineering Benefits: Health, Dental, Vision, 401(k), Paid Time Off, Holidays Shift/Hours: 7am-3:30 pm Mon-Fri Job Description: The Manufacturing Engineer is responsible for optimizing fabrication and production processes, including Laser CNC operations, bending, welding, grinding, industrial coatings, and electrical integration. This role focuses on improving efficiency, reducing cycle times, and enhancing product quality through process development and continuous improvement initiatives. The position plays a key role in implementing cost-effective manufacturing methods, maintaining accurate documentation, and supporting technology advance

Springfield, MA 01104 • (33.5 miles) • Full Time • 9/2/2026

Position Title:Full Stack EngineerLocation: Remote EST Time ZoneEmployment Type: Full-Time, Salaried ExemptSchedule: Monday–FridayAbout the OpportunityCascadience, a VIABILITY Company, is building Volio, an innovative AI-powered digital companion designed to support neurodivergent individuals, including people with ADHD, Autism, and Anxiety.Volio is evolving into an engaging student companion that combines AI-powered support, intelligent scheduling, long-term memory, and gamified experiences to help reduce cognitive overload and support independence.This is a unique opportunity to join a startup initiative backed by a 56-year established organization. As a Full Stack Engineer, you'll help build and scale the technology behind Volio while working closely with product, operations, marketing,

Southwick, MA 01077 • (42.2 miles) • Full Time • 9/2/2026

Job Position Summary:CNC Programmer is responsible to create computer numerically controlled (CNC) programs to be used for automating machinists’ tools by using computer generated electronic dataYou must have:High school diploma or GED required.Associate degree or higher in related field preferredExperience with CNC Mill multi-axis programming.CAD/CAM experience NX preferred.Processing Engineer experience preferred.Proficient computer skills including Microsoft OfficeUnderstanding of CNC machining techniques, and materials.Ability to interpret blueprints and knowledge of GD&TAbility to choose and/or design correct tooling, and apply speeds and feeds based on process and materials.Working knowledge in the Aerospace Manufacturing industry to include Aerospace standards and specifications.Wor

Suffield, CT 06078 • (44.2 miles) • Full Time • 9/2/2026

At Cadence, we improve product performance by building solution-oriented partnerships with our customers and delivering highly technical, measurable outcomes across medical device and other advanced industries.We’re an engineering company at heartwith over 75 engineers across our organizationand have built a legacy of over three decades of manufacturing excellence by doing what others consider impossible.Position Overview: We are seeking a highly motivated Validation Engineer onsite at one of our five sites: Cranberry Twp., Sturgeon Bay, WI, Suffield, CT, Staunton, VA or Cranston, RI sites, to lead and support validation activities across multiple projects at our facility.This role is critical in ensuring compliance with regulatory standards (FDA, ISO 13485, 21 CFR Part 820), working close

Amherst, MA 01002 • (16.1 miles) • Full Time • 9/2/2026

Benefits:Flexible scheduleOpportunity for advancementProfit sharingThis Is Not Your Average Tech Job Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job ResponsibilitiesPerform a wide range of technical tasks including but not limited to: OS installations, hardware diagnostics, and software setupStru

Chicopee, MA 01013 • (32.2 miles) • Full Time • 9/1/2026

Western Massachusetts Field Engineer:Join MAS Building & Bridge as a Field Engineer in our Heavy Civil Construction Division. Play a vital role in project planning and construction, ensuring projects are delivered on time, on budget, and in accordance with the Plans and Specifications. This position offers a dynamic blend of office and field tasks, providing valuable hands-on experience in diverse Heavy Civil projects including bridge, rail, marine, utility and roadway construction.Responsibilities:Daily interaction with Project Managers, Site Supervisors, and Craft personnel to support planning, scheduling, material procurement, and subcontractor management.Review of Plans and Specifications to ensure compliance with all contract requirements.Site inspections for quality, safety, and dail

Springfield, MA • (34.5 miles) • Full Time • 8/30/2026

About The Company:Lyndex-Nikken is a global organization that manufactures and supplies precision toolholders, rotary tables, and other accessories for machining. For 45 years, our products have been relied upon in industries including automotive, aerospace, energy, medical devices, and more.The Lyndex-Nikken brand represents high quality and accuracy, working seamlessly to improve the efficiency and precision of CNC machining processes. Our workplace culture is one of excellence and dedication to our team’s personal and professional development.Lyndex-Nikken is deeply confident in our product value and with 20 consecutive years of profitability, we remain committed to significant organizational growth. We are expanding our North American sales team and currently have an opening for a Regi

Northampton, MA 01060 • (22.2 miles) • Full Time • 8/29/2026

Berkshire Design Group is looking for a civil engineer to join our small team of civil engineers, landscape architects, and land surveyors in Northampton, MA. In this role, you will prepare site plans, stormwater management designs, utility layouts, and applications for state and local permits. You will also see projects through construction, providing guidance to contractors and observing work in the field.Our recent work has included new public-school buildings, rehabilitation of state parks, innovative net-zero water systems, multi-million-dollar commercial and residential developments, and master planning for institutional campuses throughout the northeast. We work in our own communities, so we pass by our projects every day, which makes even small ones feel significant.Our engineers a

Holyoke, MA 01040 • (29.4 miles) • Full Time • 8/28/2026

Full Time Caregiver Field SupervisorAt Professional Care Match, we are committed to providing exceptional care solutions for seniors in their homes. As a Caregiver Field Supervisor, you will play a critical role in ensuring the highest level of care and support for our clients while also overseeing a team of caregivers. This position will include site visits, training new staff and completing a formal Join our team of compassionate experts and contribute to our mission of empowering families with peace of mind and enabling seniors to stay in their homes.Responsibilities:Supervise and manage a team of caregivers, providing guidance, training, and feedback to ensure exceptional client careConduct client assessments, develop and implement personalized care plans, and monitor client outcomesCo