Interior Installerin GAC WestfieldInterior Installation Technician IIUnique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222701Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/15/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Job Description:Position Details:$30.00 per hour up to $35.00 per hour depending on experienceNOW OFFERING$7,500Sign On Bonus (Terms apply) andWork Boot vouchers5 Day work weeks - Flexible work hours between 12pm - 8:30am (2nd or 3rd shift)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class B keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities: The Diesel Technician – Class B performs preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, and convertor dollies under minimal supervision. Responsibilities may include, but not limited to:Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and performs repairs as required.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 3 - 5 years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in refrigeration.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.JOB SUMMARYWorking under close supervision, performs a variety of simple to routine assignments by following detailed work instruction that requires limited judgment and decision-making to complete.ESSENTIAL DUTIES AND RESPONSIBILITIES· Perform scheduled preventive maintenance.· Performs feeder maintenance, repair and data tracking.· Train employees in operation and maintenance of machinery.· May train and coordinate activities of MA.May provide assistance in the following areas:· Troubleshoot to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process.· Dismantle, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manual, rough sketches or drawings.· Uses test and diagnostic equipment to perform checkouts.· May be required to work overtime.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Able to acquire job skills and learn company policies and procedures to complete routine tasks.· Must be able to read, write and communicate in English.· Use of basic and special purpose hand tools and leveling instruments. Knowledge of torque specifications.· Basic mathematics.· Understanding of electronic color codes and other component value markings.· Understanding of safety practices requirements.· Personal computer operation in a Windows environment (Excel, Word and PowerPoint and e-mail).· Use of specialized maintenance tracking programs.EDUCATION & EXPERIENCE REQUIREMENTS· Associates degree in electronics with emphasis in servo positioning theory or equivalent discipline.· Prior experience as MA may be substituted.· Zero to two (2) years work-related experience required, preferably in electro-mechanical equipment in a manufacturing environment.· Or an equivalent combination of education, training or experience.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.#whereyoubelong#AWorldofPossibilities#EarlyCareer

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

The purpose of this job is to repair musical string instruments in a timely and proficient manner so that the instrument is returned in good playing order. A technician can specialize in one type of instrument, or work on multiple types. Duty or Responsibility:Works on rental returned instruments in an efficient & timely manner.Ensuring each instrument is repaired according to established quality guidelinesMaintain accurate records for production reportingAdditional duties as assigned.About Music & ArtsThe first Music & Arts was located in a small house in Bethesda, MD and run by founder Benjamin O'Brien. When Music & Arts opened its doors in 1952, we offered printed music, music lessons, dance lessons, and art supplies. Ben decided shortly after opening his business that he wanted to focus on music to better serve his customers -- a decision that remains intact to this day.Since the 1990's, Music & Arts has expanded nationwide through organic growth and a series of acquisitions and mergers with other music dealers. In 2005, Music & Arts joined forces with American Music to become the largest band and orchestra instrument retailer in the United States. Based in Frederick, MD, Music & Arts is now part of the Guitar Center enterprise and comprises 200+ retail stores, 120+ educational representatives, and 300+ affiliate locations.Minimum Requirements: High School Diploma or GED required.Apprenticeship or a diploma for an accredited repair school is requiredMust be able to read, write, speak, and comprehend English.Must be able to use standard repair shop tooling and equipment2 years of relevant work experience, working on musical instruments on a daily basisSkilled understanding and function of one or all brass, woodwind, percussion and orchestral instruments, and the ability to repair same in a timely and efficient mannerPerferred Requirements:4 years of relevant work experience, working on musical instruments on a daily basisAdvanced understanding and function of one or all brass, woodwind, percussion and orchestral instruments, and the ability to repair same in a timely and efficient mannerSpecial Attributes:Goal orientedThe ability to produce quality repairs in an efficient mannerThe ability to take advice and supervision from the shop managerProblem solving and technical skills as related to diagnosing and repairing each instrumentThe ability to self-motivate and work independentlyMust be able to work with others in a close environmentWhy Us Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Pay Rate:$16.00 - $18.00/hr plus commission depending on location, background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locationsMusic & Arts is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job- related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to.

Shape the Future of Medical Technology with KARL STORZ!Are you an experienced engineer passionate about designing life-changing medical devices KARL STORZ is seeking a Senior Mechanical Engineer – Product Enhancement & Development to lead the development of cutting-edge flexible endoscopes and associated technologies. This is your opportunity to work on impactful projects that enhance patient care worldwide.What you’ll be doing:Lead the design, prototyping, testing, and production of new medical devices, focusing on flexible endoscopes and accessories.Drive product development from concept to production, ensuring on-time delivery with global cross-functional teams.Identify opportunities for product improvements, cost reduction, and production yield enhancements.Develop and refine test protocols, conduct data analysis, and lead root cause investigations.Collaborate with international engineering teams to implement design changes and maintain compliance with global medical device standards (FDA, ISO 13485, ISO 9001).What’s in it for me Innovative Environment: Work on groundbreaking products that improve patient outcomes.Global Impact: Collaborate with a diverse, international team to bring medical technologies to market.Career Growth: Advance your career with a company that values professional development and technical leadership.Global Experience: Opportunities for up to 20% travel (domestic and international) allow you to gain valuable global perspectives and work with diverse teams.Contribution to Health: Play a key role in developing life-saving medical devices, making your work impactful and rewarding.What you will need to be considered:B.S degree in Mechanical Engineering (or equivalent mechanical design-based degree). 9+ years of experience in design/project engineering.5+ years of experience in a medical device development.Strong expertise in SolidWorks, statistical analysis, and MS Project/Server.Proven track record in leading teams and delivering innovative product solutions.Experience in manufacturing transitions, process development, and prototype fabrication.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.Ready to make a difference Apply now and be part of a dynamic team at the forefront of medical innovation.#LI-BL1

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Mechanic candidates to join our team in Stafford Springs CT!Shift: 3rd Shift (Monday - Friday; 11pm – 7am) At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Mechanic, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Maintaining all plant systems, which includes processing, packing, warehouse and facility operations.Installing, troubleshooting, and repairing mechanical, pneumatic, and hydraulic systems.Troubleshooting and repairing gear boxes, transmissions, pulley systems, etc.Disassembling and reassembling of machinery and various other mechanical drives.Entering Work Orders and inventory via SAMS, SAP or other MRP system.Assisting with Preventative Maintenance, continuous improvement, Kiazen events, and Lean eventsOperating safely by observing all plant safety rules and regulationsOperating and maintaining all material handling equipment (including PIVs)Performing other assignments as directed by supervision and leadershipPossessing the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:High School Diploma/GED or higher (completed prior to start)One (1) year experience as a Maintenance Mechanic in a manufacturing environmentAbility to work 3rd Shift (Monday - Friday; 11pm – 7am)Additional qualifications that could help you succeed even further in this role include:Professional certifications, military background or an Associate degreeThree (3) to five (5) years’ experience as a Maintenance Mechanic in a manufacturing environmentPossess strong mathematical skills and be a good problem solverAbility to read instructions, simple drawings or sketchesPIV certification (will train as needed)High Lift experience (will train as needed)Work location: Onsite - 32 River Rd, Stafford Springs, CT 06076Travel: No TravelRelocation Assistance: Not authorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $29.84, with the potential to reach $29.84 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

The Opportunity: TheField Service Coordinatoris responsible for the direction of employees and resources to perform duties associated with field service operations including tank cleaning, equipment & facility decontamination and emergency response. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsOpportunities for growth and development for all the stages of your careerEnsures Health and Safety is the number onegoal by following policies, processes, and acting in a safe manner at alltimes.Responsible for the cost-effective coordination and direction of field personnel and equipment to complete assigned field service projects and emergency response.Responsible for acquiring the appropriate equipment through authorized meansCreate the daily schedule with an accurate run rateEnsure all rolling stock equipment is properly permitted and maintained for operationDirect field personnel in the operational procedures to complete assignmentsUnderstand the manpower and equipment requirements to complete field service projects and emergency responsePerforms other duties and tasks as assignedfrom time to time by management and will be required by the needs of theClean Harbors business. High school diploma or equivalent required. Bachelor’s degree preferred.Knowledge of Clean Harbor Field Services3+ years’ experience in environmental fieldservice operationsAdaptable to change and ability to streamline project workKnowledge of various types of equipmentProficiency in Windows based applicationsAbility to understand issues andresolve/address strategicallyExcellent communication skills.Knowledge of Federal, state and localenvironmental regulations as well as Clean Harbors policies and proceduresrelated to field operationsStrong customer management/customer service skillsPer respirator requirements, must maintain a clean-shaven face 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. *CH#LI-VD1

Maintenance Technician 525 Mt Tom Rd, Northampton, MA 01060, USAReq #20537 Wednesday, November 6, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Maintenance TechnicianPackaging Corporation of America525 Mount Tom RdNorthampton, MA 01060Pay and BenefitsPay Range = $30.23 - $46.89 based on mechanical and electrical skills and experience.Excellent Benefits Package (Health, Dental, Optometry)401K Plan1.5 Pay over 8 hrs. and over 401.5 Pay Saturday and Sunday1.5 Pay Holidays + additional OT over 8 hours on holidaysUniforms providedPCA provides paid training to help technicians advance through the skill levels and achieve higher pay.Technicians supply their own basic hand tools. PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools. PCA provides all special and heavy tools.PCA provides Safety shoes and Safety Glass stipendsPCA provides Uniforms for Maintenance TechniciansA 2nd Class Fireman Boiler Operator License or a Grade 2 Waste Water License for the state of MA is a plus and will be additionally compensatedResponsibilitiesThis position is based at the PCA Box Plant located in Northampton, MA.This position will perform a variety of maintenance tasks including diagnosing, repairing, rebuilding, or replacing mechanical, electrical, hydraulic, and Pneumatic systems on plant equipment.Technicians work as part of a team to safely perform Preventive Maintenance Activities as well as answer break down calls in a Production Environment.All Maintenance Technician positions are multicraft and training is provided to develop these skills.Basic Qualifications2+ Years’ experience in successfully troubleshooting and repairing industrial machinery.A Technical Degree in the Mechanical or Electrical Trades is a plus.The production schedule is 3 shifts. Maintenance Technicians are placed on shifts according to plant needs and seniority. Opportunities to change shifts are available when organization changes occur or production schedules change.Be Authorized to work in the US.Experience in the Corrugated Packaging or Printing Industry is a plus. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourlyMin Hiring Rate$30.23Max Hiring Rate$46.89

Priv is the leading on-demand beauty and wellness service app that delivers professionals straight to our client’s door for hairstyling, makeup, massage, nail, facial, spray tan, ear piercing, and fitness services. We currently serve 30+ markets in the United States! We are seeking talented and professional Makeup Artists to join our community of freelance pros in your area. Be a part of our loyal team of professionals, committed to transforming the beauty and wellness industry by delivering clients a luxury experience anywhere, anytime. We work with YOUR availability; you never have to take an appointment that doesn't fit into your busy life. Earn additional income doing what you love and meeting new clients! Why Priv “I've been with Priv for 4 years and love the team, flexibility and company. Would never work anywhere else!” - Prv Professional Be an independent contractor and work when and where you wantHave the freedom to work for other apps or salonsPriv is a one-stop-shop to offer all of your services We offer competitive rates and compensation Attend professional development workshops to help you grow in the industry Build lasting relationships with clients and other beauty and wellness professionals Participate in industry level events, premiers, trade shows, and fashion shows Pay: $70 - $100 per hour https://gopriv.com/

Company DescriptionAbout Veolia North AmericaA subsidiary of Veolia Group, Veolia North America (VNA) offers a full spectrum of water, waste and energy management services, including water, and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has approximately 10,000 employees working at more than 350 locations across the continent. Please visit our websitewww.veolianorthamerica.com.Job DescriptionBENEFITSVeolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement.Position Purpose:Inspects, maintains, repairs, and installs electrical systems, instrumentation systems, mechanical, pneumatic, and hydraulic equipment, and fixtures.Primary Duties/Responsibilities:Performs preventive, predictive, and corrective maintenance on mechanical, electromechanical, hydraulic and pneumatic equipment according to vendor specifications.Inspects and troubleshoots electrical and instrumentation systems, equipment, and fixtures using testing devices, gauges, and other tools of the trade; obtains necessary parts through established procedures.Performs electrically related activities; and installs new or replacement electrical systems, equipment, and fixtures.Calibrates instrumentation, valves, flow meters, etc.Zeros and spans, debugs, and adjusts.Programs variable frequency drives.Tunes controllers, valves, actuators, etc.Downloads and restores stored data in PLCs, controllers, eproms, etc. Pulls up SCADA/PLC control strategies, looks at I/O for errors, diagnoses and resolves communication circuit problems, etc. Changes I/O modules, PLCs, etc.Completes tasks and repairs common to their licensed specialty,Reports and documents result of inspections and work performed, enters data into computer programs, and prepares labor and material estimates.Operates vehicles and mobile equipment for plant maintenance purposes.Trains peers and subordinates as requested.Assures work is performed in a safe and professional manner by following established safety, operating, and emergency response procedures, and in conformance with relevant building and electrical codes.Performs cleanup and housekeeping tasks for work area, tools, and equipment.Work Environment:Requires working in outside and inside environments with noise and all temperatures and climatic conditions and must be able to work under adverse weather conditions for extended periods of time.QualificationsEducation/Experience/Background:High School Diploma/GED is required.Knowledge/Skills/Abilities:Must demonstrate a working ability to use computer programs for maintenance management.Requires working knowledge of the standard practices, common tools, materials, occupational hazards, and safety precautions of the trade as acquired through four years of on-the-job electrician/instrumentation experience.Requires basic knowledge relating to the maintenance of pumps, blowers, compressors, and other electrically driven equipment.Must have the ability to safely operate material handling equipment; and to apply electrical methods to the maintenance of electrical systems, equipment, and fixtures.Requires good reading, math, writing, scientific, and verbal communication skills; and the ability to read wiring diagrams, sketches, blueprints, specifications, and vendor instructions.Requires the ability to carry out verbal and written instructions.Requires ability to plan, organize, train, and functionally supervise subordinates.Must have the ability to establish effective working relationships with other employees.Required Certification/Licenses/Training:Must have a valid driver's license.Must have an Electrical Journeyman’s License; Other Nationally Recognized Licensed Trades will be considered for the position. Consideration will be based upon the needs of the facility.Physical Requirements:Ability to work in various positions which require bending (60%), walking (25%), standing (10%), and sitting (5%). Requires lying on back, kneeling, crawling, twisting, and squatting.Must be able to distinguish green indicator lights from red.Body movements require working with hands extended above and below head and from body, using hand tools weighing up to 10 pounds.Ability to lift and carry 60 pounds in standing and bending positions and carry while walking distance of 10 feet.Ability to work on ladders, catwalks, and supports at heights of 50 feet above the ground.Additional InformationWe are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Come to work and be ready to think on your feet, grow your skills, and embrace the many opportunities. Our Distribution Centers are the key to getting new products out to TJ Maxx, Marshalls, HomeGoods, Sierra, Winners, Homesense, and TK Maxx. To keep up with our ever-changing inventory, we stay nimble and adaptable. No day is the same, and that’s just how we like it. Every shift is a new opportunity to Discover Different - and support each other along the way.Location: 135 Goddard Memorial Dr. Worcester, MA 01603MAINTENANCE MECHANICWork ScheduleIn Person: Monday-Friday 4:30 PM - 12:45 AM (Temporary Role)Who you are working for Come Discover Different at TJX, we think you’ll find that it’s so much more than a job.At the TJX Companies, Inc., you'll not only enjoy the security of working for a stable and profitable industry leader, but you'll also enjoy the amazing company culture, and that’s just the beginning.Our Distribution Centers are the key to getting new products to our stores, we move a lot of inventory at all times of the day and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.What’s In It for You Competitive wagesCulture that prioritizes health & safetyClean and climate-controlled workspacePaid vacation and sick timeBenefits including medical, dental, and vision insurance, 401k and 401k match, Associate discountUnion EnvironmentWhat you’ll be doing:The Skilled Tech Mechanic assists in the installation, maintenance, repair, and fabrication of DC equipment and facilities under the direct supervision of the Maintenance Supervisor. Recommend solutions for problems and poses the ability to work independently on routine problems/minor repairs. Be on call for emergencies while working, ability to handle multiple projects and daily activities, and meet timelines.Job responsibilities include:Must be able to use hand and power tools and other equipment as necessary to complete assignments including building maintenance, electrical wiring, conveyor repairs, packaging equipment, and hydraulics. Proficiently operate various power industrial trucks safely and efficiently.Possess and demonstrate carpentry skills to include fabrication projects of various materials.Recommends and implements improvements to equipment, operations and procedures and safety as appropriate.Supports maintenance manager, supervisor, and clerk to spec out and orders parts, and help maintain inventory of spares.Facilities testing according to preventative maintenance schedule and report findings and make repairs to keep all building and material handling systems operational.Requirements:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Requirements Continued:Experience in industrial maintenance field with demonstrated preventative maintenance experience in material handling systems.Proven proficiency in three or more of the following areas; electrical/electronics, welding/fabrication, plumbing, electro hydraulics, mechanical and electrical drive systems, PLC controlled systems.Familiarity with OSHA/NFPA/NEC standardsUnderstand and knowledgeable of MSDS sheets.Ability to grasp, bend, and lift or otherwise move items weighing up to 75 pounds.Ability to speak and write in EnglishGood communications and writing skills.Proficient in Mechanics Math (included but not limited to fractions & formulas)Capable of completing all company forms and paperworkAbility to work at heights or unusual work positions.Must be able to work from written and oral instructions. Trained in reading mechanical and/or electrical schematic drawings, sketches, manuals, and specifications.Must be able to operate all shop equipment and hand tools. Operate various types of welding equipment.Must maintain housekeeping standardsMust maintain OSHA Power Equipment CertificationMust maintain safe work practices.Come Discover Different at TJX - we think you’ll find that it’s so much more than a job. We move a lot of inventory - at all times of the day - and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.As you think about where to work, know that we take care of our people. We offer competitive pay and great benefits. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Expand your career possibilities.Thank you for dedicating your time and talent to Lowe’s. We want to give you more opportunities to learn and grow, so if you find a position you’re interested in below, we encourage you to apply!Find Your Home to More Possibilities.ScheduleMonday- Friday 7am-4:30pmWhat You Will DoThe focus of the maintenance team is to keep equipment in the FFC fully operational. The Maintenance Mechanic I is a knowledgeable repair person with exposure to and experience with FFC systems andbuilding components. The Maintenance Mechanic I has specialist knowledge and complex repair capability in one of the following areas: conveyors, rolling stock, or building. In addition, the individual in this role has general knowledge and basic repair capability in the other two areas outside his/her specialty. In all instances, the Maintenance Mechanic I has sufficient electrical and mechanical knowledge to safely and independently repair equipment in the FFC. The Maintenance Mechanic I is able to integrate his/her trade skills, classroom knowledge, and systems experience to recognize and diagnose equipment issues, determine the type of repair needed, prioritize and plan the work, obtain or order the appropriate spare parts, and execute the repair. This individual is capable of mentoring a Maintenance Utility, but also seeks assistance from a Maintenance Mechanic II or the Maintenance Supervisor, when needed.What We're Looking For• Required to work a set schedule that may be changed/modified by management based on the needs of the facility.• Requires availability to work morning, afternoon, nights, or weekends depending upon assigned shift and overtime based on the needs of the facility.• Requires on-call support.• Must work in a distribution/warehouse environment with the physical and environmental aspects typically associated with such environment.• Must be able to use tools and complete maintenance related tasks that require fine motor skills and hand-eye coordination.• Must be able to work safely with corrosive materials and at heights of 20+ feet.• Minimally must be able to lift 25 pounds; ability to lift up to 70 pounds.What You Need To SucceedMinimum Qualifications• Possess a valid state driver’s license• 2 years of experience in her/his specialty area• Combination of experience and/or technical training in electrical/electronic theory ranging up to 600 volts systems (or willingness to obtain appropriate training within 1 year of employment)• If required by local regulations, certified to perform work at the Maintenance Mechanic level (such as electrical work in the state of Oregon)• Proven record of complying with safety requirements• Able to see objects and discriminate colorPreferred Qualifications• High school diploma or technical school graduate• Experience and/or certification with welding and fabrication• Certification for electrical work and/or high voltage work• Experience operating various maintenance and operations vehicles and equipment• Experience reading blueprints, schematics, and other technical drawingsLowe’s is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

Job Description:Position Details:$34.00 per hour up to $45.00 per hour, depending on experienceNOW OFFERING$7,500Sign On Bonus (Terms apply) andWork Boot vouchers5 Day work weeks - Flexible work hours between 12pm - 8:30am (2nd or 3rd shift)We Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class A keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class A diagnoses and repairs medium to heavy-duty trucks, trailers, reefer units, convertor dollies and maintenance vehicles under minimal supervision. Responsibilities may include, but not limited to:Completes overhauls and rebuilds of heavy-duty diesel engines and transmission.Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and perform repairs as required.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditions.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 5 - 7 years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and a minimum of 2 years’ experience in refrigeration &/or overhauls and rebuilds of heavy-duty diesel engines and transmissionsCompany descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Aviation Safety Inspectorin GAC WestfieldAirworthiness Inspector A&P.$3,000 Signing Bonus.Unique Skills:2nd shift position (Tuesday - Friday)Gulfstream large cabin experience preferred.Flight Safety Initial course completion preferred.Must be able to occasionally work in confined spaces.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223331Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

The CNC Machining/Manufacturing Engineer at KARL STORZ provides hands-on engineering support to the Advanced Machining Center in Franklin, MA, producing high-quality components for medical devices. The role focuses on continuous improvement, process implementation, and solving machining problems. It also supports the introduction of new products, processes, and equipment.What's in it for me :Technical Mastery: Enhance your expertise in CNC programming, automation, and machining technologies while working with advanced equipment and processes.Innovation and Problem-Solving: Lead continuous improvement initiatives, develop solutions for machining challenges, and play a key role in the introduction of new products, equipment, and processes.Cross-functional Collaboration: Work closely with R&D, Project Engineering, Quality, and Operations teams, giving you exposure to various disciplines and broadening your skill set.Leadership Opportunities: Take ownership of projects like equipment qualification, process optimization, and cost-reduction strategies, driving significant impact in the manufacturing process.Career Growth: Gain valuable experience in cutting-edge areas like cobot integration, machine learning, and automation, positioning yourself for future leadership roles in manufacturing engineering.What you'll be doing:Collaborate with R&D, Operations, and Quality teams to launch and support manufacturing processes.Design and qualify tooling and fixtures for machining.Troubleshoot and validate existing processes and equipment.Insourcing of new parts and selecting/qualifying equipment (IQ/OQ/PQ).Optimize product line layout and implement flow and quality improvements.Lead cost reduction initiatives and author Engineering Change Orders (ECOs).What you need to be considered for this role:BS in a Technical/Engineering discipline.Extensive experience in CNC machining process development, automation, and programming.Proficient in problem-solving methods like Six Sigma, Kaizen, and DMAIC.Ability to design and qualify tooling, fixtures, and equipment.Proficiency in Solidworks, SPC, GD&T, and process yield improvement analytics.Additional experience that would make you stand out:Experience working with international teams and willingness to travel.Knowledge of cobot integration, machine monitoring, and learning systems.PLC programming, troubleshooting, and HMI/SCADA experience.Background in Quality Control and inspection processes.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.#LI-BL1

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.JOB SUMMARY Provides required service, repair and “return-to-operation” molds that are actively engaged in producing quality products. ESSENTIAL DUTIES AND RESPONSIBILITIES · Maintains customer satisfaction by maintaining the maintenance of molds and ancillary equipment used in producing product. · Ensures the quality fabrication and maintenance of injection molds, dies jigs, fixtures and other devices used in furthering production of the customers’ parts. · Performs preventive maintenance on molds and on mold performance tracking the maintenance with accurate and timely documentation. · Provides process improvement recommendations and forecasts any potential quality or production issues from tooling lead. · Runs all manual shop equipment as required. · Troubleshoots and analyzes problems before any repairs are initiated. · Supports production by repairing, adjusting and maintaining all forms of equipment used in the production process. · Supplies direct action in modifying molds to produce a superior quality product. · Maintains stock inventories by ensuring the proper levels of component parts are available at all times for tooling repair. · Improves the efficiency and accuracy of molded products by the documenting reasons for mold repairs and solutions to prevent future manufacturing interruptions. · May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS · Industry and Plastics Mold Knowledge · Problem Solving/Trouble Shooting · Detail Oriented · Master Craftsmen Ability · Responsiveness · Team Participation Skills · Training/Mentoring Skills · Ability to Operate All Manual Mold Shop Equipment and MachinesBE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.#whereyoubelong#AWorldofPossibilities#EarlyCareer

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Technician candidates to join our 2nd Shift team in Stafford Springs CT!Shift: 2nd Shift (Tuesday - Saturday; 3pm - 11pm)At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Providing support for basic maintenance tasks, preventative maintenance, facilities maintenance, audits, demolition, service to production tasks, and assisting skilled maintenance craftsAssisting in the documentation and implementation of maintenance proceduresEntering Work Orders and inventory via SAMS, SAP or other MRP systemSupporting daily wastewater treatment plant operationsAssisting Plant Engineering or performing other assignments as directed by supervision and leadershipYour Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:High School Diploma/GED or higher (completed prior to start)One (1) year of manufacturing, construction or military work experienceAbility to work 2nd Shift (Tuesday - Saturday; 3pm - 11pm)Ability to wear a respiratorAdditional qualifications that could help you succeed even further in this role include:Experience in a manufacturing plant environmentPossess or currently pursuing certifications or an AS degree targeting a Plant Maintenance careerPIV certification (will train as needed; must certify within 60 days)High Lift experience (will train as needed; must certify within 90 days)Possess strong mathematical skills and be a good problem solverAbility to read instructions, simple drawings or sketchesWork location: Onsite - 32 River Rd, Stafford Springs, CT 06076Travel: No TravelRelocation Assistance: Not authorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $29.84, with the potential to reach $29.84 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Description:Position Details:$26.00 per hour up to $35.00 per hour depending upon experience$2500 Sign On Bonus (Terms Apply) and $1000 Annual Tool Allowance4 Day Work Week! (Wed 11:30am – 5:30am / Thurs – Sat 11:30pm – 5:30am)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class B keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class B performs preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, and convertor dollies under minimal supervision. Responsibilities may include, but not limited to:Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and performs repairs as required.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:• High School Diploma/GED or State Approved Equivalent • 3 - 5 years experience of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in refrigeration.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Senior Avionics Technicianin GAC Westfield$6,500 Signing Bonus. Eligible for Relocation Assistance.Hiring for All Shifts.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222283Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Description:Position Details:$30.00 per hour and up depending upon experienceSunday - Wednesday 2nd shift hours$5000 Sign On Bonus (Terms Apply), as well as Quarterly Safety IncentivesWe Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class A keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class A diagnoses and repairs medium to heavy-duty trucks, trailers, reefer units, convertor dollies and maintenance vehicles under minimal supervision. Responsibilities may include, but not limited to:Completes overhauls and rebuilds of heavy-duty diesel engines and transmission.Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and perform repairs as required.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditions.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:• High School Diploma/GED or State Approved Equivalent• 5 - 7 years experience of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair• Minimum of 2 years’ experience in refrigeration &/or overhauls and rebuilds of heavy-duty diesel engines and transmissions.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Avionics Technician IIin GAC WestfieldHiring for All Shifts. $6,500 Signing Bonus.Unique Skills:Avionics Technicians / Avionics Electrical Techs.See job description for detailsEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222280Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Requistion Number:25041When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.The hourly rate starts at $35.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commssions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsWhat’s In It for You Home every day17 PTO days plus 7 paid holidays$5,000 sign-on bonusOngoing safety incentivesCareer advancement opportunities and annual performance reviews Uniforms provided$2,500 employee referral program Year-round medical coverage available as well as:401k with company match, propane discount year-round, paid holidays and paid vacationRequirementsAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Senior Aircraft Mechanicin GAC WestfieldA&P Aircraft Mechanic / Aircraft Technician.$6,500 Signing Bonus. Eligible for Relocation Assistance. Hiring for All Shifts.Unique Skills:See job description for details.Prior corporate aircraft experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222282Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Aircraft Technician IIin GAC WestfieldA&P Aircraft Mechanic / Aircraft Technician.$6,500 Signing Bonus. Hiring for All Shifts.Unique Skills:Please see job description.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222279Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Avionics Technician Iin GAC WestfieldHiring for All Shifts.Unique Skills:See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams. . Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Additional InformationRequisition Number: 222278Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Aircraft Painterin GAC WestfieldUnique Skills:Prior aircraft or automative painting experience is preferred.Education and Experience RequirementsHigh School Diploma or GED required. 2 years in related paint processes. Aircraft industry experience preferred.. Valid Drivers License required.. Position Purpose:The Aircraft Painter II works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications. Follow standard operating procedures when using tools and equipment such as dual action sanders, hydraulic lift platforms and paint sprayers. Properly care for and maintain shop equipment and tools. Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required. Comply with safety rules and procedures and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. Use the material tracking system to create parts demand, track squawks and to sign-off work. Assist with aircraft movement in hangars. Offer continuous improvement ideas/participate in continuous improvement activities.Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to use tools and equipment associated with the aircraft painting process. Ability to read and interpret blueprints and engineering documentation. Able to pass Pulmonary Function Test to obtain respirator certification. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics) is necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223394Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/15/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Structural Mechanicin GAC WestfieldSheet Metal Mechanic II / Sheet Metal Technician II$4,500 Signing Bonus.Unique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Position Purpose:In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. Able to work with minimal supervision on duties and tasks . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment .Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Assist in maintaining shop equipment and associated JSAs . Support Lean Activities .Perform other duties as assigned.Other Requirements: Must be able to read and interpret blue prints. Basic computer skills and basic shop math skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223065Category: OperationsPercentage of Travel: Up to 50%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Lead Avionics Technicianin GAC WestfieldUnique Skills:Day Shift Position.See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience on large/mid-size aircraft. 8 years experience in aircraft avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and six (6) years related experience. FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. FCC license or NCATT certification preferred. Position Purpose:Plans and coordinates all electrical/avionics activities and provides customers with daily information on aircraft schedules, repairs, parts, components shipped to vendors, etc. Works with hangar management to coordinate electrical/avionics activities and schedule aircraft requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plans, schedules, and completes tasks on work authorizations in order to meet the master schedule. Provides daily status reports and progress schedules to management. . Coordinates efforts of Electrical and Avionics activities to meet aircraft schedules and deadlines. Reviews work, including forms and records, to ensure compliance with Site Inspection Procedures Manual, Site Operating Procedures and FARs. . Supervises and instructs electrical technicians with technical guidance and proper procedures of troubleshooting electrical/avionics systems, routine inspections and preventive maintenance. Provides input to subordinate performance appraisals and submits them to management for review. . Reviews daily job charging for all personnel (including support groups) to ensure accuracy of inputs. . Maintains a preventive maintenance program on test equipment, hand tools, and special tools. Maintains a current knowledge of Aircraft Service Changes (ASC), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Supervises a continuous safety program in hangar area which includes operation of support equipment, aircraft systems and general housekeeping. Maintains required. logs and records. Enforces the company FOD, tool control, 5-S programs and all safety regulations. . Able to adapt to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Establishes and fosters an environment of innovation and Lean oriented thinking. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must have thorough knowledge of aircraft systems, troubleshooting, technical manuals systems, and aircraft maintenance records system. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret electrical/avionics system drawings and blueprints. Must have demonstrated leadership ability. Excellent communication skills, both verbal and written. Demonstrated ability to plan, organize, implement and obtain objective with minimal direction. A good understanding of PC, Windows and main frame computer applications including the use of standard computer word processing programs (i.e. Microsoft Word) and appropriate typing skills a plus. Must be able to climb ladders and stairs, work in small-space restricted area, and lift up to 100 pounds. Ability to use hand tools and avionics test equipment. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223636Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Aircraft Technician Iin GAC WestfieldUnique Skills:Upcoming A&P graduates will be considered.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate or 2 years of aviation maintenance experience. . Valid Driver’s License required. Position Purpose:The Aircraft Technician I, under close supervision, performs or assists with inspection, maintenance, and repair of basic aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform basic aircraft inspections, repairs, and modifications under close supervision. Assist with movement of aircraft as required. Properly complete CMP cards, work order sign-offs, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic power units, hydraulic lift platforms, forklifts, compressed gas cylinders, etc.) . Ensure all customer property is properly protected.Additional Functions: Use material tracking system to create parts demand, and to charge labor to Work Orders, items, and squawks. . Properly collect and dispose of waste fuel, oil, hydraulic and de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address and report unsafe conditions before putting people or property at risk. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222276Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Mechanical Team Leadin GAC WestfieldUnique Skills:Weekend shift position.See job description for details.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223619Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1