Compensation Type: Yearly Highgate Hotels: Highgate is a premier real estate investment and hospitality management company widely recognized as an innovator in the industry. Highgate is the dominant player in U.S. gateway markets including New York, Boston, Miami, San Francisco and Honolulu, with a rapidly expanding presence in Europe, Latin America, and the Caribbean. Highgate’s portfolio of global properties represents an aggregate asset value exceeding $20B and generates over $5B in cumulative revenues. The company provides expert guidance through all stages of the hospitality property cycle, from planning and development through recapitalization or disposition. Highgate also has the creativity and bandwidth to develop bespoke hotel brands and utilizes industry-leading proprietary revenue management tools that identify and predict evolving market dynamics to drive out performance and maximize asset value. With an executive team consisting of some of the industry’s most experienced hotel management leaders, the company is a trusted partner for top ownership groups and major hotel brands. Highgate maintains corporate offices in London, New York, Dallas, and Seattle. Location: Overview: The Chief Engineer is responsible for the day-to-day operations of the engineering division. Responsibilities: Developing and implementing plans to maintain property, equipment, grounds and other assets in a safe and acceptable state of repair.Ensure the hotel is in compliance with all local, state and federal laws.Supervise and train all Engineering staff in Customer Service, Empowerment, Standard Operating Procedures and Loss Prevention.Create and implement preventative maintenance program for all hotel equipment.Ensure all emergency and life safety equipment and systems are inspected, tested and certified per Highgate Hotel standards.Actively participate in energy conservation programs.Review all guest and meeting planner comment cards to ensure problems are identified and corrected in a timely manner.Ensure compliancewith the Americans with Disabilities Act (ADA).Assist with the administration of all vendor contracts controlled by the engineering department.Ensure that room maintenance requests are handled in a prompt and courteous manner.Follow up on all alarms immediately to determine the exact location and cause.Determine emergency status and report findings to Front Desk.Take immediate action as necessary.Assist as necessary with special projects and renovations.Support and participate in all Highgate Hotel programs.Participate in Highgate Hotel Safety Committee. Qualifications: At least 3 years of progressive facilities management experience in a hotel or a related field; or a 2-year college degree and 1 year of related management experience.High school diploma or equivalent required.Stationary Engineer’s license if required by local code.HVAC, electrical, plumbing, boiler operations and general maintenance skills required.Long hours sometimes required.Heavy work – Exerting up to 100 pounds of force occasionally, and /or 50 pounds of force frequently and/or up to 20 pounds of force constantly to lift, carry, push, pull or otherwise move objects.Maintain a warm and friendly demeanor at all times.Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly, courteous and service oriented manner.Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests.Must be able to multitask and prioritize departmental functions to meet deadlines.Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner.Attend all hotel required meetings and trainings.Participate in M.O.D. coverage as required.Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel.Maintain high standards of personal appearance and grooming, which include wearing nametags.Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations.Maximize efforts towards productivity, identify problem areas and assist in implementing solutions.Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary.Must be able to understand and evaluate complex information, data, etc. from various sources to meet appropriate objectives.Must be able to maintain confidentiality of information.Perform other duties as requested by management.

The Quality Engineer IV is a senior-level professional responsible for supporting the quality assurance of both sterile and non-sterile products, focusing on KARL STORZ’s Advanced Machining Center (AMC) and Single Sterile Use (SSU) production. The role ensures compliance with quality and sterilization standards, focusing on patient safety and regulatory requirements.What's in it for me Leadership Opportunities: You’ll take a lead role in quality initiatives, process improvements, and compliance, with the chance to mentor and supervise technicians.Professional Growth: You’ll work with advanced technologies like sterilization processes and cleanroom environments, gaining specialized expertise in medical device manufacturing and regulatory standards (FDA, ISO, MDR).Cross-functional Collaboration: You’ll engage with various teams (engineering, production, regulatory) to drive high-impact projects and continuous improvement.Job Security and Impact: You’ll play a crucial role in ensuring patient safety and product quality, contributing directly to healthcare innovation.Advanced Tools and Systems: Access to cutting-edge tools, quality systems, and software (SAP, Six Sigma, SPC) enhances your technical skill set.Challenging and Diverse Work: Exposure to a variety of processes, including process validation, defect analysis, audits, and environmental monitoring, ensures dynamic day-to-day responsibilities.What you’ll be doing:Provide sterilization expertise and oversee sterilization release processes.Support continuous improvement in product and process quality, including validation, defect analysis, CAPA, and internal audits.Ensure compliance with FDA, ISO, and MDR regulations, supporting both internal and external audits.Lead initiatives to improve quality systems, lean manufacturing, and Six Sigma activities.Analyze quality data, prepare inspection procedures, and review engineering changes.Supervise and mentor technicians and provide training to QA and manufacturing teams.Ensure environmental monitoring and product sterility requirements are met.What you need to be considered:Bachelor’s degree in engineering and 5+ years of experience in medical device manufacturing and quality assurance.Knowledge of sterilization, clean rooms, machining, and injection molding.Proficiency in statistics, SPC, and quality engineering tools.Strong communication, problem-solving, and organizational skills.Experience with MS Office, SAP, and quality tools like Six Sigma and Minitab preferred.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.#LI-BL1

Position ProfileSchneider Electric is a global leader in enterprise energy management systems. We are looking for a new team member who can help us advance our cloud-based energy management and information systems. As a member of this team you will work on strategic projects delivering world class enterprise software systems to a wide variety of customers.We are looking for a passionate and creative senior software tester with extensive Web software quality assurance experience to join our agile team of Business Analysts, Developers, Quality Assurance, Operations and Support. This role will play a crucial role in high quality and frequent deliveries of our cloud-based energy management system.The Sr. Software Tester will be primarily responsible for reviewing and analyzing requirements and system specifications, creating and executing (manual/automated) test cases, reviewing results, reporting and documenting technical issues to ensure client requirements are met. The successful candidate must strive to deliver high-quality software that is highly scalable, performant, interoperable and secure while aligned with client needs and business goals at the same time.Responsibilities & Key TasksAnalyze user stories/use cases/requirements for validity and feasibilityDevelop effective test strategies and plans. Design, create and manage test casesDesign and develop automation scripts when neededExecute test cases for all levels of testing (system, integration and regression)Detect and track software defects and inconsistenciesReproduce, trouble shoot, verify fixes for customer reported issues (technical support tickets)Apply quality assurance principles throughout the Agile product lifecycleOther duties as assigned Skills and QualificationsEssential5+ years of post-secondary work experience as a Software Tester or similar roleBroad and extensive knowledge of software testing process and technologiesExperience with testing Web applications hosted on the cloudExperience with system, integration, and regression testingExperience with user acceptance testingExperience with test management softwareStrong knowledge of software development cycle, software testing life cycle and bug life cycleCommitment to customer satisfaction and qualityAnalytical and skeptical mind and problem-solving aptitudeAttention to detailStrong organizational skillsPositive attitude, enthusiasm, and self-motivation Excellent written and verbal communication skills.Proven ability to learn quickly, multi-task and handle pressure to meet tight deadlinesDesirableA strong understanding of software Agile methodologies, particularly ScrumExperience with automated testingExperience in Atlassian tools (Jira Software, Jira Service Desk, Confluence, etc) Experience with automation tools like Selenium, Test Complete and SoapUIExperience with working in distributed teams and with remote stakeholdersExperience with SQL Server and Cosmos DBExperience with Cyber security principlesExperience with BI tools such as Qlik or Tableau Looking to make an IMPACT with your career When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values – Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork – starts with us.IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world.We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one.Become an IMPACT Maker with Schneider Electric – apply today!36 billion global revenue+13% organic growth150 000+ employees in 100+ countries#1 on the Global 100 World’s most sustainable corporationsYou must submit an online application to be considered for any position with us. This position will be posted until filled.Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and ‘inclusion’ is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. This extends to our Candidates and is embedded in our Hiring Practices.You can find out more about our commitment to Diversity, Equity and Inclusion hereand our DEI Policy hereAt Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter hereSchneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Pay: $80000 per year - $80000 per yearAt Great Wolf, theAssistant Director of Engineeringsupervises maintenance operations and physical condition of the facility to ensure the highest quality standards of guest satisfaction within the allotted budget.Essential Duties & ResponsibilitiesMeets maintenance operational standards by contributing maintenance information to strategic plans and review; implementing production, productivity, quality, and customer-service standards; resolving problemsEvaluates functionality and reliability of facility systems and associated equipment by conferring with operating departments; identifying problems and requirementsMaintains function and reliability of facility systems and associated equipment by implementing a preventive maintenance program; operating and testing systems and equipment; restoring, repairing, rebuilding, or replacing faulty or inoperative components and partsImproves function and reliability of facility systems and associated equipment by studying performance results; identifying, recommending, and implementing changes, expansions, and additionsPerform supervisory responsibilities by selecting, training, scheduling, coaching and counseling with disciplinary measures, as necessaryEvaluate performance of the team and recommending compensation actionsMaintains safe and healthy work environment by following standards and procedures; complying with legal codes and regulationsUpdates job knowledge by participating in educational opportunities, staying up to date with the industryAccomplishes maintenance and organization mission by completing related results as neededBasic Qualifications & SkillsAssociate's degree or equivalent experience5+ years experience with hands-on equipment maintenance; must include experience with solving electronics failures, using such tools as test clips for device packages along with grabbers, SMD tweezers, probes, and insertion/extraction tools3+ years experience with supervising work for a team of technically skilled individualsDesired Qualifications & TraitsPlumbing License, Certified Pool & Spa (CPO) License, Aquatic Facility Operator (AFO) CertifiedPrevious experience in leadership role in resort/waterpark settingAble to develop, implement, and monitor programs that adhere to all appropriate regulations, including: Ergonomics, Emergency Response, Injury and Illness Prevention, and Hazard CommunicationsExcellent people management skills including resolving conflict, coaching and developing others, promoting teamwork, and performance managementPhysical RequirementsAble to lift up to 15 lbsAble to bend, stretch, and twistAble to sit or stand for long periods of timeAble to climb multiple flights of stairs on daily basis and walk frequentlyThis contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, and for inquiring about, discussing or disclosing compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Responsibilities: Work under supervision of Manager of R&D to develop advanced control systems for robotic manipulators and similar electromechanical systems, including motion control and servo tuning, development of dynamic models, modeling and simulations in Matlab, and implementation of software on real-time platforms. The responsibilities also include controls-related machine design analysis and selection of actuators, sensors and other controls-related components. Limited travel within and outside the US. Reports to: Manager, Controls Engineering Direct Reports: None Essential Skills• Skilled in general mathematical modeling and analysis. • Familiarity with system dynamics and control systems theory. • Thermal modeling and analysis.• Hands on experience with control systems and tuning. • Proficiency in using MATLAB for data analysis and data control simulation • Experience in C and C++ programming for Linux and for embedded systems. • Some experience in electronic circuit design, prototyping, and troubleshooting.Additional Desirable Skills• Theoretical background and experience in electrical and electronic system design. • Experience in digital and analog circuit design, embedded systems, interfacing with microcontrollers, power electronics design, and motion control.• Familiarity with optical design and opto-electronic components, such as laser diodes, photodiodes, transceiver circuits. • Proficiency in OrCAD, PADS or similar design tools. • Lab skills, including soldering of components, rework of PCBAs. Minimum Education Requirement: M.S./Ph.D. degree in Computer, Mechanical, Electrical, Aeronautic or similar engineering field, with 0 to 1 year of work experience.About Persimmon TechnologiesPersimmon Technologies is a worldwide leader in robotics and electric motor technology. Persimmon provides vacuum robotics for the semiconductor, LED and flat panel display equipment markets worldwide. Persimmon has also developed a next generation electric motortechnology using additive manufacturing techniques. Persimmon is wholly owned subsidiary of Sumitomo Heavy Industries, Ltd. (SHI), a $7 Billion integrated conglomerate. Persimmon is headquartered just outside of Boston in Wakefield, Massachusetts. For more information on Persimmon technology, please visit www.persimmontech.com.This job has been posted by IgnyteAI on behalf of Persimmon Technologies. IgnyteAI is committed to the fundamental principle of equal opportunity and equal treatment for every prospective and current employee. It is the policy of IgnyteAI not to discriminate based on race, color, national or ethnic origin, ancestry, age, religion, creed, disability, sex and gender, sexual orientation, gender identity and/or expression, military or veteran status, or any other characteristic protected under applicable federal, state or local law.

The Automated Reasoning Group is looking for a Senior Applied Scientist with expertise in programming language semantics and deductive verification techniques (e.g. Lean, Dafny) to deliver novel code reasoning capabilities at scale. You will be part of a larger organization that develops a spectrum of formal software analysis tools and applies them to software at all levels of abstraction from assembler through high-level programming languages. You will work with a team of world class automated reasoning experts to deliver code reasoning technology that is powerful yet accessible to all developers.About the teamAWS Utility Computing (UC) provides product innovations from foundational services such as Amazon’s Simple Storage Service (S3) and Amazon Elastic Compute Cloud (EC2), to consistently released new product innovations that continue to set AWS’s services and features apart in the industry. As a member of the UC organization, you’ll support the development and management of Compute, Database, Storage, Internet of Things (Iot), Platform, and Productivity Apps services in AWS, including support for customers who require specialized security solutions for their cloud services.Diverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. Why AWS Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. Hybrid WorkWe value innovation and recognize this sometimes requires uninterrupted time to focus on a build. We also value in-person collaboration and time spent face-to-face. Our team affords employees options to work in the office every day or in a flexible, hybrid work model near one of our U.S. Amazon offices.BASIC QUALIFICATIONS- PhD, or Master's degree and 6+ years of applied research experience- Experience programming in Java, C++, Python or related language- Experience in formal verification tools and techniques, such as theorem provers (Dafny, Lean), SAT-SMT solversPREFERRED QUALIFICATIONS- PhD in engineering, technology, computer science, machine learning, robotics, operations research, statistics, mathematics or equivalent quantitative field- Experience with neural deep learning methods and machine learning- Experience in compiler technologiesAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.

The Safety Engineer will be part of the UniFirst Corporate Support Services Safety Department, engaged in the development and implementation of Health and Safety programs at the Regional and Location levels in order to maintain compliance with safety regulations and Safety Culture Continual Improvement process. They will conduct audits, training, and engagement strategies at UniFirst locations across the United States and Canada as assigned. Job Detail Design, manage and update safety programs, procedures and training to improve and maintain safe working conditions for UniFirst Team Partners as well as visitors and contractors at UniFirst locations.Support the UniFirst Safety Ambassador program, including providing support for organized safety inspections throughout UniFirst.Conduct safety audits at UniFirst locations under your oversight, to include identifying and correcting potential safety hazards as well as training location management and frontline Team Partners on safety related issues.Present training and new initiatives to a wide audience, from senior management to frontline Team Partners.Conduct JHAs, HA’s, Risk Assessments, Ergonomics assessments at UniFirst locations.Support leadership to apply and encourage corrective action including engineering controls, equipment, and process changes, reinforcing positive behaviors, and administrative activities.Demonstrate and assist with good safety practices at locationsOversight of all accident, incident and near miss reporting through the Company’s Risk Management System.Take an active role in accident investigations and injury management by thoroughly reviewing accident reports and conducting a formal RCA (Root Cause Analysis) where necessary.Collect and analyze injury data to identify trends as well as make recommendations for improvement along with JHA development and revision.Act as a liaison and point of contact between UniFirst and local, state, and federal safety and environmental agencies including Emergency Management Organizations.Collaborate with other Support Services Departments, as well as UniFirst’s operations, to help eliminate hazards throughout the Company.Review and approve all process and equipment plans as well as any revisions necessary to improve the Company’s safety profile. Assess the risk with UniFirst Team Partners and evaluate the effectiveness regarding the safe working environment.Evaluate engineering modifications of machinery for improved safetyQualificationsExperience 3-5 years of industrial/manufacturing experienceProfessional safety certification (CSP or similar) preferred, or willingness to obtain certification requiredStrong computer skills (Microsoft Word, Excel, PowerPoint, Outlook)OSHA and compliance regulation experienceExcellent written and verbal communication skillsDemonstrated ability to interact with labor, management, and outside consultants and governmental entitiesProfessional and helpful attitudeWillingness to collaborate with others and problem-solveAbility to manage multiple projects and maintain reasonable deadlinesOpenness to training in other Health and Safety areasAbility to identify and correct unsafe actionsSkilled in the Root Cause Analysis process, mitigation, and corrective strategiesKnowledgeable in, and skilled the implementation of the hierarchy of controls Education Bachelor’s degree from accredited four-year college required, Safety and Health or related degree preferred. Additional Requirements Travel up to 50%Clean driving recordAbility to obtain passport for Canadian travelExperience with Origami preferableKnowledgeable in Third-Party Compliance preferable Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Our client, a commercial property management company, is seeking an HVAC Engineer to join their team. As an HVAC Engineer, you will be responsible for maintaining and operating facility systems to ensure efficient and safe operations. The ideal candidate will have a strong background in HVAC, mechanical systems, and general handyman skills. HVAC Engineer Philadelphia, PA $30-$35/hour Responsibilities Operating, inspecting, and maintaining all HVAC, mechanical, electrical, and plumbing equipment and systems in assigned facilities.Assure the equipment is maintained efficiently, and safely, and downtime is minimized through proactive repairs and record-keeping.Perform ongoing preventive and repair work orders on facility systems, equipment, and components.Maintain compliance with State, County, or City Ordinances, Codes, or Laws and attend periodic training seminars to stay up-to-date with industry trends and best practices. Requirements: 3+ years of HVAC Skills on commercial propertiesHandyman skills – Plumbing, electrical, fit and finishUniversal EPA certification required Why should you choose Manpower Engineering Medical, Dental, Vision, 401k with MatchWeekly pay with direct depositHoliday PayReferral RewardsMonthly Recognition ProgramsDedicated Career Partner to help you achieve your career goalsRecognized as World’s Most Ethical Companies in 2023 for 14th year in a row If this is a role that interests you and you’d like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!About ManpowerGroup, Parent Company of ExperisManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent

NVIDIA has continuously reinvented itself over two decades. Our invention of the GPU in 1999 fueled the growth of the PC gaming market, redefined modern computer graphics, and revolutionized parallel computing. More recently, GPU deep learning ignited modern AI - the next era of computing. NVIDIA is a “learning machine” that constantly evolves by adapting to new opportunities that are hard to pursue, that only we can tackle, and that matter to the world. This is our life’s work, to amplify human creativity and intelligence. Make the choice to join us today.Join our dynamic team at NVIDIA, responsible for managing and maintaining high-quality VLSI development infrastructure for the Backend Networking team. We seek a dedicated and driven Software Engineer eager to manage compute and storage effectively, develop scripts and automation, create dashboards and apps while collaborating with a remote team in Israel.What you’ll be doing:Oversee and optimize compute and storage resources, ensuring operational efficiency and success of VLSI projects. Develop and maintain scripts and automation tools to streamline infrastructure tasks.Design, implement, and maintain dashboards for monitoring and reporting on infrastructure performance and usage.Work closely with a remote team in Israel, ensuring smooth communication and coordination on infrastructure-related tasks.Engage in the entire lifecycle of infrastructure tool development, including design, testing, deployment, and maintenance.Collaborate with other team members and DA teams to implement innovative software solutions and practices.What we need to see:Bachelor’s degree in computer science/engineering or equivalent experienceMinimum 3 years' experience with VLSI Design Automation.Strong proficiency with UnixProven experience in at least two programming languages, including Python, and scripting.Good debugging and problem-solving skillsStrong interpersonal skills along with the ability to work in a diverse teamWays to stand out from the crowd:Basic understanding of data structures and algorithms, specifically those related to Graph Theory. Experience with SQL and LSB scheduler.Experience with GUI and Unix/web application development. Familiarity with programming languages such as C++, Tcl, Python, or other scripting languages like Perl and Shell.NVIDIA is widely considered to be one of the technology world’s most desirable employers. We have some of the most experienced and dedicated people in the world working for us. Are you creative and autonomous Do you love the challenge of constant innovation and creating the highest performance products in the industry If so, we want to hear from you.The base salary range is 108,000 USD - 201,250 USD. Your base salary will be determined based on your location, experience, and the pay of employees in similar positions.You will also be eligible for equity and benefits. NVIDIA accepts applications on an ongoing basis.NVIDIA is committed to fostering a diverse work environment and proud to be an equal opportunity employer. As we highly value diversity in our current and future employees, we do not discriminate (including in our hiring and promotion practices) on the basis of race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Build your best future with the Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offerCompetitive salary starting at $56k base plus guaranteed commission and sign-on bonus with total compensation of $83kPaid vacation/holidays/sick time – 15 days of vacation, 5 sick days, 3 floating holidaysComprehensive benefits package including but not limited to; 401k, Medical, Dental and Vision care – Available day oneEncouraging and collaborative team environmentCheck us Out: A Day in a Life at Johnson Controls | Sales Roles - YouTubeWhat you will doOur Early CareerSales Engineering (BEST) Program is a 6-month technical sales development program for Recent College Graduates that focuses on creating market share by strategic selling Johnson Controls’ HVAC products and services to commercial customers. In this program you will have a chance to apply your technical engineering knowledge and business acumen to work with customers to better understand their product and project needs by being the subject matter expert. As part of the program, you will participate in a 6-month training and development program combining classroom, field orientation, and on the job training. You will learn our mechanical equipment and service offerings, customer relationship techniques and leadership skills in preparation for supporting customers in your territory alongside the sales team. You will be prepared to consult with architects, engineers, and building owners on product selections; partner with and learn from internal experts and deliver on business goals. You will be a critical part of a local sales team and a national network of sales professionals. #BEST How you will do itEstimate job bids and prepare proposals with contractors, architects and building owners Coordinate with vendors and subcontractors Complete sales calls to generate new business and build on existing relationships Present solutions to customers for consideration Collect and analyze market intelligence Turn projects over to operations team for execution and installationsWhat we look forRequired:Currently pursuing a Bachelor’s degree in a technical field (engineering, construction management, IT etc.) and graduating in December 2024 and May/June 2025. Program starts January 6, 2025 or June 9, 2025Strong analytical ability to solve problems and ability to learn quickly Ability to manage multiple projects and cross-functional teams with minimum guidance Strong communication and teamwork skills U.S. Citizenship or Permanent ResidencyPreferred:Electrical or Mechanical Engineering Degree, strongly preferred Previous sales, engineering or business experiences through co-ops, internships, part-time or full-time jobs

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationJob Summary:Responsible for partnering with BJ’s suppliers to develop packaging solutions for our Own Brand products. Works closely with a cross functional Own Brand team (comprised of Own Brand Management, Sourcing, Product Development and Quality) to execute a roadmap of projects that deliver top and bottom-line Own Brand growth. Accountable for delivering primary and secondary (transit) packaging solutions that protect the quality of the product, minimize waste and optimize product cost. Responsibilities and Key Accountabilities:Partners with the Own Brand Manager to understand the strategic initiatives of the business and implement packaging solutions in partnership with BJ’s suppliersPerforms technical and competitive benchmarking to define critical vs optional primary and secondary packaging attributes to engineer the right quality at the best costDefines a roadmap of opportunities for quality engineering to deliver value to our members and profitability for BJs. Responsible for identification and validation of package materials and suppliers through the development process and provides feedback to BJ’s suppliers. Partners with BJ’s suppliers to document the packaging specification for each product in BJ’s portfolioEnhances and validates package components and packaging processes to ensure packaging can maintain integrity throughout the Supply ChainEvaluate, recommend, develop and implement packaging materials/systems based on multiple factors and influenceDefines sustainability standards for packaging that support waste and cost reductionInfluences the Own Brand cross functional team with a strong understanding of the interactions among product, processes and packaging to deliver consistent and strong product quality Validates the packaging quality achieves the specification through the commercialization phase of product development in partnership with BJ’s suppliers to deliver a high-quality product for our membersPartner with external suppliers and internal cross-functional teams to identify, develop, trial and commercialize new packaging formats for current and innovative Own Brand products. Monitors and manages on-going packaging quality to ensure products remain competitive and initiates continuous improvement projects when opportunities ariseQualifications:Bachelor’s Degree- preferred in Packaging Engineering5-15 years' experience in a retail owned brand or consumer packaged goods R&D / packaging teamFood, personal care and/or household packaging development experience – including understanding of cost drivers, quality management and technical feasibilityTrack record of driving exceptional results in a cross functional environmentWorking knowledge of product manufacturing (CPG experience desired)Strong curiosity, problem solving and strategic thinking skillsOutstanding communication and collaboration skills – thrives in a team environmentProject management skillsExceptional prioritization ability focused on delivering against most important outcomesKnowledgeable about packaging design for logistics/warehousing optimizationIn-depth knowledge of packaging, material compatibility and technologies related to development, testing and implementation of new product packaging and delivery systemIn accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $98,500.00.

Are you a skilled Process Manufacturing Engineer with a passion for precision and innovation Do you excel in high-stakes environments and thrive on working with cutting-edge machinery If you bring expertise in manufacturing complex components for medical devices, KARL STORZ has an exceptional opportunity for you in our state-of-the-art Advanced Machining Center in Franklin, MA. Here, you’ll make a tangible impact on the production of critical components for high-quality medical devices, driving excellence in a highly regulated, quality-focused environment.About the Role:As a CNC Machining/Manufacturing Engineer at KARL STORZ, you’ll provide hands-on engineering support to our Franklin facility, focusing on continuous improvement, process implementation, and advanced troubleshooting. This role will also involve the integration of new products, processes, and equipmentfostering growth in an innovative, high-tech manufacturing environment.Why Join Us Master Cutting-Edge Technology: Expand your expertise in CNC programming, automation, and machining technologies, working with some of the most advanced equipment available.Drive Innovation: Lead continuous improvement initiatives, solve complex machining challenges, and play an active role in the launch of new products and processes.Cross-Functional Exposure: Collaborate with R&D, Project Engineering, Quality, and Operations teams, gaining a holistic view of medical device manufacturing.Take Ownership: Spearhead projects in equipment qualification, process optimization, and cost-reduction strategies, contributing meaningfully to our production process.Path to Growth: Develop skills in cobot integration, machine learning, and automation, laying the groundwork for future leadership roles within manufacturing engineering.What You'll DoCollaborate with R&D, Operations, and Quality teams to launch and maintain efficient, effective manufacturing processes.Design and qualify tooling, fixtures, and equipment for optimal machining.Troubleshoot, validate, and optimize existing processes and equipment.Manage insourcing new parts and equipment selection/qualification (IQ/OQ/PQ).Improve product line layout, flow, and quality to enhance overall efficiency.Lead cost-saving initiatives and author Engineering Change Orders (ECOs).What We’re Looking ForEducation: BS in a Technical or Engineering discipline.Experience: Strong background in CNC machining process development, automation, and programming.Skills: Proficiency in Six Sigma, Kaizen, DMAIC, tooling and fixture design, SolidWorks, SPC, GD&T, and process yield improvement analytics.Preferred QualificationsExperience working with international teams and an openness to travel.Familiarity with cobot integration, machine monitoring, and learning systems.Knowledge of PLC programming, troubleshooting, and HMI/SCADA.Background in Quality Control and inspection processes.If you’re ready to advance your career in a role where your skills will be both challenged and honed, apply today to join KARL STORZ and help shape the future of medical device manufacturing!Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.#LI-BL1

For this U.S. based position, the expected compensation range is $112,000 - $168,000 per year, which includes base pay and short-term incentive. The compensation range for this full-time position applies to candidates located within the United States. Our salary ranges are determined by reviewing roles of similar responsibility and level. Within the salary range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric also offers a comprehensive benefits package to support our employees, inclusive of medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks (credits to apply towards your benefits) flexible work arrangements, paid family leaves, 401(k) + match, well-being and recognition (including service anniversary) programs, 12 holidays per year, 15 days of paid time off per year (pro-rated in the first year of employment based on start date), opportunity to purchase company stock (eligibility depends on start date), and military leave benefits.You must submit an online application to be considered for the position. The Company will accept applications on an ongoing basis until the position is filled. Schneider Electric has an opportunity for aSenior Software Engineerin ourEnergy and Sustainability Services group. The preferred location is Louisville, Kentucky.As part of a team of talented architects and developers, the Sustainability Software Developer is responsible for design and implementation of business-critical applications across the Sustainability business. They work with software architects and stakeholders to understand requirements and constraints, and then develop plans and execution strategies to meet those needs. Schneider Electric's Sustainability Architecture Group initiatives involve leveraging the latest technologies to build innovative and sustainable solutions. They use Azure services such as IoT, AI, and machine learning to develop solutions that enable customers to optimize their energy usage, reduce their carbon footprint, and improve operational efficiency. Senior Software Engineers play a key component in the overall success of the team with focus on design and development of software solutions in the overall strategic architecture and platform strategies leveraging their expertise in .NET Core and C# development.Schneider Electric is a global leader in energy management and automation solutions. They are committed to sustainability and reducing carbon emissions, and their business focus is on providing solutions that help customers achieve their sustainability goals.Work on a talented team of experienced architects and developers building SaaS based energy and sustainability solutions for our business clients and customers.Develop and enhance core business systems and applications, and to provide integration to other internal and external systems. The individual will be an integral part of a professional team and will be responsible for all aspects of software design, development, testing, integration and deployment.Support and enhance the Enterprise Architecture of the Energy and Sustainability Services through technology review, ideation, project development, and delivery.Collaborating with cross-functional teams to design and develop software solutions that address sustainability challenges.Writing clean, efficient, and maintainable code using .NET Core and C#.Integrating sustainability metrics and data into software systems.Developing APIs and web services for data collection and analysis.Participating in code reviews and ensuring adherence to coding standards and best practices.Troubleshooting and resolving software defects and issues.Keeping up to date with industry trends and emerging technologies relevant to sustainability.What will you bring Proficiency in .NET Core and C# development.Strong understanding of software development principles, design patterns, and best practices.Familiarity with sustainability concepts and challenges.Experience with data integration and analysis, utilizing databases and SQL.Knowledge of front-end technologies such as Angular, HTML, CSS, and JavaScript.Excellent problem-solving and analytical skills. This job might be for you if have:Degree in Computer, Software, Engineering or related. This is not an entry-level role.Extensive experience with designing application solutions based on REST-based APIs using .NET Core and C#.Knowledge of cloud computing; experience of building scalable, resilient applications using Azure a plus.Knowledge of Service-Oriented Architecture (SOA), its principles, and patterns at the enterprise level.Experience in data modeling techniques. Knowledge and applicability of various normal forms.Experience of working in collaborative teams and working in an agile mannerPrevious energy or sustainability industry knowledge a plusRequired Skills:C#, .NET, ASP.NET MVC, .NET CoreWeb APIApplication Architecture and Design PatternsModern UI Framework like AngularJSAzure - Web Apps, Web Job, Azure Data Factory, Azure Storage, App Insights, Azure Functions, CI & CD, Service Bus, KubernetesMocking Framework like Moq and Unit TestingSQL Server, NoSQL DatabasesFamiliar with HTML5, CSS, JSON, ES6, Javascript, TypeScript Looking to make an IMPACT with your career When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values – Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork – starts with us.IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world.We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one.Become an IMPACT Maker with Schneider Electric – apply today!36 billion global revenue+13% organic growth150 000+ employees in 100+ countries#1 on the Global 100 World’s most sustainable corporationsYou must submit an online application to be considered for any position with us. This position will be posted until filled.Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and ‘inclusion’ is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. This extends to our Candidates and is embedded in our Hiring Practices.You can find out more about our commitment to Diversity, Equity and Inclusion hereand our DEI Policy hereAt Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter hereSchneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

The Amazon Web Services’ (AWS) Event tech team is looking for a Software Development Engineer (SDE) with a passion for working on cutting edge technology, obsesses over bar raising experiences for customers, and thrives on the challenge of building something new that will operate at world-wide scale to join our fast paced team. In this role, you will be responsible for implementing modern, creative, and innovative data experiences across a breadth of customer facing web apps, our data warehouse for reporting, and integration with third party applications.If you are passionate about building state-of-the-art web applications and services that focus on simplicity, innovation, performance, consider applying for this role! Your work will have high visibility across AWS internally, and the global AWS community of developers and users.In this position, we are looking for an engineer with deep service orientated expertise and experienced with variety of technologies. We are looking for someone who understands developing innovative services in the cloud, leveraging the best technologies AWS has to offer, and can build software. We need someone who is motivated to tackle ambiguous situations with technologies to rapidly produce prototypes. You will outline paths from prototype to product. You will need to contribute to the professional development of colleagues through mentoring, improving their technical knowledge and the engineering practices on your team. You have an eye towards quality and insist on the highest standards.- Be heavily involved with design and product teams to understand needs, propose features, create early prototypes, and transform them into exciting experiences.- Know how to integrate information from a large number of services.- Write clean, maintainable code and perform peer code-reviews.- Deep-dive into client or server systems to optimize for performance, maintainability, extensibility, and more as needed.- Propose innovative tools, frameworks, automations and processes that are used by the entire services team for development.- Mentor team members to promote engineering excellenceOur team is dedicated to supporting new members. We have a broad mix of experience levels and tenures, and we’re building an environment that celebrates knowledge sharing and mentorship. Our senior members enjoy one-on-one mentoring and thorough, but kind, code reviews. We care about your career growth and strive to assign projects based on what will help each team member develop into a better-rounded engineer and enable them to take on more complex tasks in the futureAbout the teamAbout AWSDiverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.Why AWS Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.BASIC QUALIFICATIONS- 3+ years of non-internship professional software development experience- 2+ years of non-internship design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience programming with at least one software programming languagePREFERRED QUALIFICATIONS- 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalent- Experience with AWS technologies like Appsync, DynamoDB, Lambda, EventBridge, Amazon OpenSearch, CloudWatch and others- Experience with Event based architecture, search and analyze unstructured and semi-structured data, Infrastructure as Code, and CI/CDAmazon is committed to a diverse and inclusive workplace. Amazon is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. For individuals with disabilities who would like to request an accommodation, please visit https://www.amazon.jobs/en/disability/us.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $129,300/year in our lowest geographic market up to $223,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Our client in the building automation industry is seeking a Building Automation System Engineer to join their team. As a Building Automation System Engineer, you will be part of the Hard Services team supporting various site systems. The ideal candidate will have strong communication skills, the ability to remain calm under pressure, and a general understanding of building automation systems. Job Title: Building Automation System Engineer Location: Andover, MA Pay Range: Competitive What's the Job Monitor various building automation system computers to ensure systems are operating within specified parameters Enter work orders related to system and equipment problems into the CMMS system and coordinate with work order execution personnel Assist electrical, mechanical, and control system technicians in troubleshooting equipment problems Maintain a logbook detailing all alarms and critical activities that occurred on his/her shift Work under the direction of the Hard Services team to maintain "change control" over the BAS system What's Needed High School diploma; Trade school certification or degree a plus A general understanding of building automation systems with emphasis on Siemens, Honeywell and JCI Knowledge of basic HVAC equipment and how it is controlled and alarmed in an industrial/commercial environment A working knowledge and understanding of automation system architecture Detailed knowledge and experience working with Excel and Word software programs What's in it for me Competitive pay Opportunity to work with a leading company in the building automation industry Ability to learn new concepts and ideas quickly Regular and predictable attendance to support the needs of the team and the client Any and all other duties and tasks assigned If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells –creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationYour time, talent, ambition, and experience are priceless. Invest in the Internship Program at BJ’s Wholesale Club for the highest return where personal and professional development matter and the value add is clear. A BJ’s internship means exposure to meaningful, tactical skills building and an opportunity for permanent placement through full integration into the business, executive-level exposure, and an individual special project with clear deliverables. We look forward to meeting you and hope to welcome you to our team soon!Program Summary Duration: 11 weeks, June 2nd 2025 – August 15th 2025Site VisitsWeekly IKE Sessions (Information Knowledge Exchange) with Senior LeadershipSkills WorkshopsWeekly Coffee Chats and Coffee with the CEOFinal projects and presentationsEngagement ActivitiesMajor Tasks, Responsibilities, and Key AccountabilitiesData AnalysisWork observationsTime studiesQualifications/DescriptionRecent junior, senior, or graduate student majoring in Analytics, Operations/Logistics, or Industrial EngineeringAble to work hybrid schedule in Elkton MDProficient in Excel and SQLCAD acumen a plusStrong written and verbal communication skillsAbility to work independently and cross functionally. Hardworking, curious, and eager to learnBJ's Wholesale Club is committed to a policy of equal employment opportunity for all qualified team members and applicants for employment without regard to race, religion, color, sex, sexual orientation, age, ancestry, national origin, physical and/or mental disability, genetic information, atypical cellular or blood trait, marital and/or familial status, pregnancy, gender identity and expression, military or veteran status, or any other characteristics protected by applicable lawIn accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $20.00.

Our client, a well-recognized commercialproperty management company is seeking a Commercial Building Engineer to join their team. As a Building Engineer, you will be responsible for inspecting and maintaining all HVAC, mechanical, and electrical equipment and systems in assigned facilities.Job Title: Commercial Building EngineerLocation: Boston, MABenefits: Medical, Dental, Vision, 401kPay Range: $44-46/hourlyAbout the Role: Performance of ongoing preventive and repair response work orders on facility mechanical, electrical, and other installed systems, equipment, and other components. Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it relates to assigned buildings. Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations. Job Requirements: Candidate must possess and maintain a valid state driver's license. Ability to pass a drug screen and criminal background check dating 7 years. CFC/EPA certification. Minimum of 3years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing, electrical equipment repair and maintenance and overall system design and application. What's in it for me Medical benefits 401(k) Opportunity to grow in a large company. Company vehicle, gas card, phone/tablet Why Work for Us: Here at Manpower Engineering, we care about people and the role of work in their lives. Werespect people as individuals, trusting them, supporting them, and enabling them toachieve their aims in work and in life. We have been recognized in multiple ways for ourability to do this successfully. If you are interested in working with us and learning more about this opportunity, click the apply button now and start the path of a new adventure. #mpgengineering