Job Description SummaryJob DescriptionEssential Responsibilities: Operate all boilers and boiler auxiliaries in the power plant, including all types of equipment to support the entire facilitySupport the organization and determination of boiler load and load distributionReport operating conditions to and operate under the direction of Power Plant EngineerOperating includes communication between operators and maintaining proper operating conditions, boiler pressure, steam temperature, water levels and operating all types of auxiliary power plant equipmentTake required action in emergencies, report any unsafe conditions, keep area clean, etc.Monitor alarm panel and take actions to alarms and or notify appropriate personnelMake tests on water and determine characteristics such as sulfate, alkalinity, phosphate, solids and oxygen on water conditionPrepare records, record data and make necessary correction to control water conditionPerform related duties to maintain proper water treatmentReport unusual or unsafe conditions and take action when needed and or notify appropriate personnel, take required action in emergenciesComply with all state regulations regarding boiler / turbine operation and all state records and logs must be completedComplete and maintain company records and logs relative to all phases of the power plant operation and maintenance requestsMust be knowledgeable of all power plant systems including steam and water lines, condensate lines, surge tank lines, compressed air lines and all other lines pertinent to the operation of the facilityPower Plant Operators must wear proper PPE for work being performed, keep assigned areas clean and provide communication to Power Plant Operators and Power Plant EngineersPerform other duties as required1st shift opportunity!4/10 hour days with Additional Weekly Overtime Available!Sign on Bonus Opportunity! Qualifications/Requirements:High School Diploma or equivalent education (GED)Commonwealth of Massachusetts Third Class Engineer’s LicenseEligibility Requirements:Power Plant Operators must wear proper PPE for work being performedAbility and Willingness to work rotating shiftsWilling to work in area with elevated heat and noiseAbility to lift, move and manipulate fixtures and component hardware up to 40 lbs. (with or without reasonable accommodations)Ability to work in confined areas, work off ladders, platforms and heightsThis role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment.Desired Characteristics:Experience as an operating engineerExperience in the operation of oil and gas fired high pressure boilers, water softeners, air compressors and related auxiliary equipmentExperience with computers, applications, and keyboardingHave knowledge and understand safety rules in an industrial settingAbility to troubleshoot problemsAdditional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are seeking a hands-on Senior Director of Hardware Engineering. This individual should be not only deeply rooted in the robotics domain but also have a holistic understanding of automation, mechanical, electrical and industrial contexts.What we doAt the forefront of technological innovation in robotics and automation, our Hardware Engineering team is dedicated to developing cutting-edge solutions that revolutionize industrial applications. We blend advanced robotics with automation to design systems that are not only innovative but also robust and scalable, capable of operating efficiently across various industrial settings. Our work encompasses a broad spectrum of activities including mechanical design, electrical engineering, and software integration, ensuring that every product we develop meets the highest standards of quality and performance. We are a dynamic group of professionals committed to pushing the boundaries of what's possible in hardware engineering, driving forward our mission to lead and transform the industry.What you’ll doTechnical Leadership: Dive deep into complex hardware challenges, providing hands-on technical guidance and solutions. Ensure our robotic and automation designs are both innovative and feasible. Leadership: coach, mentor, and grow the hardware engineering team, ensuring a blend of creativity and discipline in every project. Develop reports and manage high performing teams. Robotic Design Excellence: Ensure our robotic solutions are mechanically and electrically sound, backed by meticulous design, rigorous testing, and iterative refinement. Industrial Acumen: Integrate an industrial perspective into our designs, focusing on aspects like PLCs, motor systems, drives, and conveyance mechanisms to ensure our automated and robotics solutions can thrive in real-world industrial environments. Software Synergy: Foster a strong collaboration between hardware and software teams. Ensure high-level and low-level software integration aligns seamlessly with hardware functionalities. Strategic Planning: Set the direction for the hardware engineering department, ensuring alignment with the company's overarching vision and goals. Drive Key Performance Indicators across the Hardware Engineering team. Stakeholder Engagement: Regularly liaise with other department heads, executives, and external partners to align on project objectives, deliverables, and timelines. Intense Collaboration: Collaborate closely with cross-functional teams (software, design, procurement, installation, commissioning, and product management) to ensure seamless integration and functionality. Continuous Learning: Stay updated with the latest trends, technologies, and best practices in robotics, automation, mechanical design, and industrial applications. Deliver continuous improvement, value-add and cost reductions. Travel: Travel to up to 25% What you’ll needBachelor’s degree (Master’s degree preferred) in Engineering Mechanical, Electrical, Robotics, or a related field. 15+ years in hardware engineering, with a substantial focus on automation, robotics and/or automotive. Proven ability and experience in designing and scaling industrial automation and robotic solutions, in a fast pace and customer-focused environment. Hands-on expertise in mechanical, electrical and industrial design, industrial controller, motor systems, drives, sensors and conveyance mechanisms. Strong understanding of design principles, product life management, engineering design environment, manufacturing processes, safety and quality control procedures. Experience leading various distributed/multi locations team, including external design partners. Deep understanding of the robotics field, both from a mechanical and software automation perspective. Familiarity with high-level and low-level software integration in robotic systems. Demonstrated leadership with a hands-on approach, ensuring practical and efficient solutions. Exceptional analytical, problem-solving, and decision-making skills. Strong interpersonal skills, capable of fostering collaboration and navigating complex organizational structures. Certifications or additional training in industrial systems, PLC programming, and conveyance systems is desirable. Other ConsiderationsUp to25%of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-AH1#LI-OnsiteAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are looking for a Principal Robotics Engineer – Bot Routing. You will be working on the robot routing team to design, develop and implement the routing strategies for our robots. You will be working with a group of industry leading roboticists to implement a large-scale production robotic solution. What we doThe Minibot team is responsible for all software development on Symbotic's large fleet of autonomous mobile robots, which perform mission critical operations in the supply chain. This includes embedded systems, controls, perception, path planning, and GUI development.What you will doDistributed software systems design for Robotic Warehouse Systems which work in real-time constrained environment, highly available & widely scalable. Design, develop and productize solutions for multiagent path finding and optimize its heuristics with resiliency to real world factors (like hardware performance and communications reliability). Analyze a system of distributed software components using performance, profiling, and debugging tools. Cross-team collaboration to design, implement and deploy new features (hardware and software). Be a proactive communicator who enjoys working closely with creative and technical peers. Work in a dynamic Agile/Scrum based environment. Travel to customer sites on regular basis, provide technical support upon request. Play a lead role in this effort and mentor junior team members. What you’ll needHands-on problem solver with excellent software design and implementation skills. 15+ years professional experience developing software in C#/Java/C++ with Windows and Linux. Expertise in classical algorithms and data structures (Path finding, Dynamic Programming). Asynchronous or multithread programming in real time constrained environments. Background in distributed software development (TCP/IP, UDP, HTTP/REST, gRPC). Scripting, data analysis and visualization tools (Matlab, Python/Numpy/Pandas/Mathplotlib). Test coverage with unit tests and test automation frameworks. Cross-platform .NET core development and containerization (Docker, K8s) is a big plus. This person must be able to work in a fast-paced environment and support unscheduled events. Degree in a Computer Science or other related discipline. #LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Job Description SummaryAs a Lead Engineer – Thermal on the Advanced Programs IR/Thermal Design Team, you will help pioneer the next-generation military propulsion systems by defining and delivering thermal integrated solutions to defend freedom around the globe.Job DescriptionAs a Lead Engineer - Thermal, you will:Develop and execute, with guidance, the analysis, design, test, and integration of novel thermal design concepts related to gas turbine exhaust & augmentor systems.Implement lean standard practices applicable to thermal design for exhaust systems.Recommend productivity improvement strategies to exhaust systems thermal designs.Ensure proper documentation in a timely manner following all engineering policies and procedures.Monitor and communicate project status updates to relevant leadership team members.Present or review key technical review presentations to ensure engineering excellence.Actively participate and support Tech Reviews, Tech Community activities, and relevant Design Board meetings and subcommittees.Required QualificationsBachelor of Science in Mechanical, Aerospace, or closely related field of Engineering.A minimum of 4 years of relevant thermal design experience.Ability to obtain and maintain an active US Government security clearance.Desired QualificationsAdvanced degree in Mechanical or Aeronautical Engineering related to heat transfer or fluid mechanics preferredPrior experience in the fundamentals of heat transfer and compressible flows.Strong technical aptitude, including applicable engineering tools and systemsExperience with fluid flow & heat transfer analytical software.Effective in contributing in a structured, cross functional teamwork environmentHighly-motivated, passionate and an eagerness to learn.Excellent written and oral communication skills.Fundamental understanding of augmentors and exhaust nozzle system design.Familiarity with exhaust thermal & IR design tools.Ability to obtain and maintain an active US Government security clearance.#LI-TR1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryThe Advanced Programs (AP) section is responsible for the design, integration, testing, and support of advanced technologies for new and derivative engine concepts. Technology focus areas include military inlet & exhaust systems, integrated propulsion power & thermal management systems, advanced material systems, and other breakthrough component and system technologies to support the future of military flight.The AP – Aerodynamic Design Lead Engineer will contribute to the aerodynamic design and development of GE’s Edison Works new product offerings including augmentors and supersonic exhaust nozzles. Responsibilities will focus on the conceptual design, maturation, integration, and testing of exhaust aero systems and technologies. As a Lead Engineer, you will drive design efforts with guidance from experienced team leads and technical experts in a mission-based team environment. Opportunities to collaborate with and direct small team and cross-functional efforts will develop through the maturation of the design.Teams in the Advanced Programs space are fueled by a passion for aviation and a sense of purpose to support our military customers. We solve hard problems by pulling concepts from the science & technology realm into the world of applied engineering. Whether it’s aerodynamic flow path design, non-reacting and reacting CFD analysis, augmentor system layout, rig and engine support or testing - this role is a guaranteed opportunity to grow your skillset. The harder the problem the harder we push, building on a legacy of engineering excellence to invent the future of flight.Job DescriptionAs a Lead Engineer - Aero, you will:Develop and execute with guidance the analysis, design, test, and integration of novel exhaust aero design concepts to meet the needs of our customers.Implement lean standard practices applicable to aero design for exhaust systems.Recommend productivity improvement strategies to exhaust systems aero designs.Ensure proper documentation in a timely manner following all engineering policies and procedures.Monitor and communicate project status updates to relevant leadership team members.Present or review key technical review presentations to ensure engineering excellence.Actively participate and support Tech Reviews, Tech Community activities, and relevant Design Board meetings and subcommittees.Required QualificationsBachelor of Science in Aeronautical, Mechanical, or closely related field of Engineering.A minimum of 3 years of relevant aero design experience.Ability to obtain and maintain an active US Government security clearance.Desired QualificationsAdvanced degree in Aeronautical or Mechanical Engineering related to fluid mechanics preferredPrior experience in the fundamentals of aerodynamics and compressible flows.Strong technical aptitude, including applicable engineering tools and systemsExperience with design and analysis software such as Siemens NX, Ansys Workbench, Ansys CFX, Ansys Fluent, Python, etc.Effective in contributing in a structured, cross functional teamwork environmentExcellent written and oral communication skills.Fundamental understanding of augmentors and exhaust nozzle system design.Familiarity with aero design, tools, and processes.This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAbout GE AerospaceAre you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world!About this positionThe Lynn advanced programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines. The lead fan rotor mechanical design engineer will be the fan rotor hardware owner, responsible for execution of mechanical design and development of the fan rotor as part of the fan module team. In this role, the lead engineer will utilize engineering experience to solve problems and recommend technical solutions partnering with teammates and technical experts. This role is best suited for a collaborative problem solver with a desire to deepen their mechanical design expertise and develop new solutions to challenging technical problems. Effectively working with teammates and peers in adjacent organizations will be necessary for successful project execution to impact short-term and long-term business goals.Working at our Lynn FacilityCome and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!Job DescriptionRoles and Responsibilities:Execute the design and analysis of the fan rotor by applying engineering principles and adhering to business standards, practices, procedures, and product/program requirements with guidance from experienced teammates and technical experts. Properly document technical data generated.Develop specialized knowledge in fan rotor mechanical design and fan rotor integration into the fan module/engine. Stay current with the latest technical developments and internal processes.Provide timely communication if significant issues or challenges arise. Collaborate with people leader and/or teammates to develop action plans to resolve challengesPrepare and present technical data along with recommendations or conclusions to internal and external customer audiencesGain an understanding of competitors and the factors that differentiate designs or productsLead small projects within the fan module balancing some risk and resource requirementsRequired Qualifications:Bachelor of Science in Engineering from an accredited college or university.Minimum of 3 years of experience in relevant mechanical design engineering position.Due to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenship.Desired Characteristics:Bachelor of Science in Mechanical or Aerospace Engineering from an accredited college or university4-5 years of experience in relevant mechanical design engineering position.Active US Government Security Clearance at the Secret levelExperience with finite element analysis software such as ANSYSKnowledge of 3D Modeling software, preferably Unigraphics/NXUnderstanding of GD&T principles and reading or creating drawingsExperience in design, analysis, and manufacturing of high-precision or turbomachinery componentsPassion for the aviation industry and advancing the state-of-the-artAbility to identify problems, evaluate options, and recommend solutions considering input from stakeholders and technical expertsStrong project management skills with ability to independently organize and prioritize effortsStrong communication and collaboration skills in-person and across geographic sites#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAbout GE AerospaceAre you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, curiosity, and unique ideas. Most importantly, you will share in our pride and purpose that affects the lives of millions around the world! About the PositionThe Lynn Advanced Programs (AP) section is a brand-new organization with the mission of inventing the future of flight and advancing propulsion capability for the next generation of military applications. Lynn AP supports a wide range of engineering activity including design, analysis, and testing across new, derivative, and existing engines. The staff engineer will lead mechanical design and development of the fan rotor as part of the fan module team. This role is best suited for someone with a passion for engineering and a strong desire to solve new and challenging technical problems all while balancing project requirements. Collaboration with teammates and peers in adjacent organizations will be necessary to achieve project outcomes. The staff engineer will also provide guidance and mentoring to less experience engineers on the team.Working at our Lynn Facility:Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million square feet of manufacturing space, we’re making a huge contribution to the future of flight! The Lynn facility is the birthplace of the very first jet engine in 1942 and continues building upon this legacy with a deeply knowledgeable team building quality engines. Additionally, GE Aerospace has invested more than $100 million in facility improvements in the last five years alone. Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward!Job DescriptionRoles and Responsibilities:Execute with limited guidance the design and analysis of the fan rotor using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Properly document technical data generated.Develop specialized knowledge in fan rotor mechanical design and fan rotor integration into the fan module/engine. Stay current with the latest technical developments and internal processes.Provide technical guidance that influences outcomes in the design process leveraging experience, expertise, and data to support recommendations. Mentor others in the organizationMaintain working knowledge of competition and the factors that differentiate designs or productsDevelop action plans, with guidance, to respond to issues/ problemsParticipate as a presenter or reviewer in technical and program reviews with internal and external customersAct as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements.Required Qualifications:Bachelor of Science in Engineering from an accredited college or universityMinimum of 5 years of experience in relevant mechanical design engineering positionDue to the nature of the duties of this position, this role requires the individual to obtain and maintain US Government Security Clearance; prerequisite for a security clearance is U.S. citizenshipDesired Characteristics:Bachelor of Science in Mechanical or Aerospace Engineering from an accredited college or university6-8 years of experience in relevant mechanical design engineering positionActive US government security clearance at the Secret levelExperience in design, analysis, and manufacturing of high-precision or turbomachinery componentsProficiency with finite element analysis software such as ANSYSExtensive experience with 3D Modeling software, preferably Unigraphics/NXProficient with GD&T principles and reading drawingsPassion for the aviation industry and advancing the state-of-the-artStrong communication and collaboration skills in-person and across geographic sitesAbility to influence others and lead small teamsDemonstrated ability to identify, analyze, and resolve problemsStrong project management skills with ability to independently organize and prioritize effort#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAbout GE AerospaceAre you ready to see your future take flight At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you’ll share in our pride and purpose that affects the lives of millions around the world!About the PositionThe Mechanical Analysis Staff Engineer will use their experience and expertise in Finite Element Analysis (FEA) to solve challenging problems and contribute to the design and development of various military jet engine product lines and is responsible for leading, planning and executing activities associated with stress evaluation tasks. You will demonstrate leadership in communicating program business goals, technical progress, and processes for the Defense Engines organization within GE Aerospace.The ideal candidate will utilize sound problem solving to identify the most impactful areas for technical improvement, reviewing proposed solutions with Controlled Title Holders (CTHs: in-house subject matter experts), and working cross-functionally with the systems and design engineering teams for New Part Introduction (NPI), Component Improvement Programs (CIP), Quality Event Management (QEM) and Material Review Board (MRB) escalations. Additionally, the candidate will provide technical mentorship to less-experienced engineers on the team. The role has some autonomy and is focused on execution of activities within Defense Engines Mechanical Analysis, covered by standard functional practices and procedures. This position requires on-site work Tuesday-Thursday in Lynn, MA.Working at our Lynn FacilityCome and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With 1.6 million sqft of manufacturing space, we’re making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What’s more, GE Aerospace has invested more than $100 million in our facility in the last five years alone.Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward.Job DescriptionRoles & ResponsibilitiesFormulate and implement finite element stress analysis (FEA) plans to achieve technical requirements, schedules and program commitments.Execute the finite element stress analysis of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Create finite element models (FEM) as needed using a variety of tools (Hypermesh, ANSYS, UG, etc.)Provide technical and program leadership to domestic and global engineering personnel assigned to support the analysis efforts, mentors others in the organization.Monitor and communicate project status, business issues and significant developments.Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures.Participate as a presenter or reviewer in technical and program reviews.Basic QualificationsBachelor of Science in Engineering from an accredited college or university8 years of experience in an aerospace or mechanical engineering position, regularly utilizing finite element analysisDesired CharacteristicsAdvanced degree in Mechanical or Aerospace EngineeringProficiency in finite element analysisPrevious experience creating and setting up analysis models in Hypermesh, ANSYS, UG, or equivalent.Previous experience running finite element analyses using ANSYS or equivalent.Proven ability to interpret, check and communicate results.Strong technical aptitude, including applicable engineering tools and systems.Solid oral and written communication skillsAbility to successfully work in a team environment.Ability to guide and influence others.Strong interpersonal and leadership skills, with cross-functional experience.#LI-MF1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes