FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Markem-Imaje is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjets, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment.Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.The Role:Working in a team-oriented workplace, Electrical Engineer IV will effectively apply electronic skills to perform activities concerned with analysis, design, testing/troubleshooting and manufacturing of products/systems including the application of these products/systems to commercial, industrial and scientific uses. As required by the business, works closely with other engineering disciplines in the development and application of products/systems or services.Job Responsibilities:• An excellent understanding of the Customer’s requirements, expectations, and application environment as it relates to product/system performance is required.• Execution of Customer requirements/expectations into product variations/enhancements or a new product idea is expected.• Collaboration and teamwork with other functional departments such as Reliability, Value Stream, Manufacturing Engineering, Test Engineering, GPS, Tech Service, Depot Centers, Sourcing, Business Centers, Product Management, etc., is required to ensure product/system performance objectives are met.• Timely resolution of product/system issues that affect MI’s internal and external Customers, which may involve engineering research, redesign, test & validation, documentation and communication is expected.• Responsible for all phases of product development including the specification, design, component selection, implementation, verification and validation of products and services. May provide technical leadership to a small group of assigned engineers and technicians.• Principle responsibility/ownership in the development of new electronic circuits or systems.• Proficient in the use of computer-assisted engineering and design software/equipment such as ECAD to perform assignments which include schematic capture and circuit simulation.• Recommend complex components, architectural systems and equipment based on analysis of specifications and reliability. May also review vendor capability and make recommendations to support product development.• Determine, plan and execute design approaches and parameters through the research, assimilation and application of new technology, utilizing creative problem-solving skills such as DOE/FMEA in order to develop new electrical analysis methods.• Remain current with a variety of the field's concepts, practices, and procedures.• Principle responsibility/ownership towards the continuous improvement efforts within the R&D community.• Perform, guide or lead complex electrical design functions associated with new product development. Comfortable working with and/or directing the mechanical, chemical, and electromechanical aspects of project.• Collaborate with and direct other engineers/peers in the acquisition, analysis and verification of electrical performance to specification through simulation and measurement. (E.g. power factors, electronic architecture timing, I/O, User Interface, communication ports, etc.).• Ensure successful completion of the assigned project/task within the budgeted time and cost constraints.• Participate in key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Work closely with local business/technical centers, sales and service representatives in order to generate revenue generation opportunities.• Identify new and/or works with existing suppliers and subcontractors on specifications, designs, schedules, etc. in the support of projects and production equipment. Coordinate key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Coordinate, lead and/or participate in design review meetings and associated activities.• Actively participates in the annual business planning sessions related to Electrical R&D.• Maintain laboratory notebooks in accordance with requirements of research/ design/development process.• Travel and/or interfacing with Customers, Business Centers is expected and encouraged.• Perform other related duties as assigned by management.Job Requirements:• Master’s Degree with a minimum of 8 years of experience in a related field or a Bachelor’s Degree with 10 years of experience.• On-going, advanced coursework in Electrical/Electronic Engineering required.• 10+ years of experience developing PCBAs.• Demonstrated ability to design and enter schematics (Altium a plus) and a superior knowledge and experience of digital, embedded CPU and analog circuits.• FPGA and/or C programming skills a plus.• The candidate should be able to develop their assignments will minimal direction as well as functional as part of a cross-functional and international product development team.• Mentoring and leadership of less experienced personnel in an agile environment.• Expertise in more than one of the following is required: system design, analog and digital circuit design, solid state power electronics and power conversion, microprocessor and digital signal processor, software, local area networks, wireless communications, data logging, and electromechanical devices.• Complex analog and digital design capability that includes expertise with low- and high-density integrated circuits, microprocessors/microcontrollers, motor controllers, display drivers, communication drivers, input/output devices, power supply circuits/conditioning, wiring diagrams and cable management. Experience with architectural design/manufacturing that includes VHDL, FPGA, CPLD, BGA and SMT.• Expertise with PCB design, testing, analysis and validation required.• Expertise with EMI/EMC design, testing techniques and Agency certification practices required.• Programming knowledge of C++ is preferred.• Proven track record of success for designing, implementing and manufacturing reliable product designs.• Expert use of test equipment/apparatus, computer-assisted engineering and design software, circuit board processes, etc.• Expertise with the use of ECAD for schematic capture and circuit simulation, oscilloscopes, DMM’s, logic/spectrum analyzers, signal generators and data logging equipment.• Expertise utilizing Design of Experiments (DOE) methodology is required.• Proficient knowledge of common software programs, including Word and Excel.• Strong leadership, Customer, interpersonal communication and mentoring skills a must.• Demonstrated aptitude in Engineering Excellence: FMEA, DFT, DFM, Root Cause Analysis, Design of Experiments, etc.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $150,000.00 - $170,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function:

Role Overview: A $5,000 sign-on bonus is being offered for this opening. Precise. Reliable. Powerful. Join a team as innovative as the technology we manage.Sodexo's Healthcare Technology Management team seeks an experienced, reliable, & personableBiomedical Engineering Supervisor for Cape Cod HealthcareinHyannis, MA. This position will report on-site in Hyannis, MA. We are looking for a positive and motivated supervisor to join our team. Working in Healthcare Technology Management (HTM) for Sodexo, you will partner with our Healthcare clients to manage their clinical technology needs. Together, we provide leadership and expertise for their business, patients, residents and the staff who care for the patient. At Sodexo, we improve the Quality of Life of all those we serve. Incentives: $5,000 sign-on bonus What You'll Do: Oversee biomedical services, including technician management and scheduling of preventative maintenance activities.Provide hands-on support and guidance to biomedical technicians, ensuring quality work and adherence to safety standards.Collaborate with Healthcare Technology Management (HTM) team to manage clinical technology needs in partnership with healthcare clients.Offer leadership and expertise in healthcare technology operations to support business, patient care, and staff needs.Ensure equipment is properly maintained, serviced, and repaired to meet operational standards and support patient safety. What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include:Medical, Dental, Vision Care and Wellness Programs401(k) Plan with Matching ContributionsPaid Time Off and Company HolidaysCareer Growth Opportunities and Tuition ReimbursementMore extensive information is provided to new employees upon hire. What You Bring: Experience repairing, maintaining and calibrating medical devicesExperience in a hospital or healthcare settingThe ability to be organized, resourceful, adept at making decisions and managing budgetsStrong service focus to include the ability to engage staff, vendors and client to ensure service is continually sustained at a high levelLeadership capabilities to oversee operations, client relations, and supervise their technician and engineering staffExcellent communication, customer service and time management skills Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide.Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you’re happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form. Qualifications & Requirements: Minimum Education Requirement - Bachelor’s Degree or equivalent experience Minimum Management Experience - 3 years Minimum Functional Experience - 3 years work experience in facilities (e.g., maintenance, plant operations, engineering services, grounds, custodial/environmental, or transportation) or a related field

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a Methoding Processing Engineer! The Methoding Processing Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture!Essential Job Functions/Duties Communicate effectively with internal customers providing updates to progress against key milestones.Manage scrap reduction in the production operation.Design and simulate pattern rigging for new and existing product and create process techniques to produce and control the metallurgical and NDT integrity of the product.Develop and maintain operational sequences for part manufacture in conjunction with Administrative, Manufacturing, Quality, and NDT disciplines.Create and manage project timelines to move product through the shop, providing regular status updates to engineering and production management.Develop and manage BOMs and ensure accurate standard costs.Keep milestone updates and obtain agreements from internal customers.Troubleshooting in production processes related to Engineering.Create and maintain the documentation of work instructions and procedures for front end production processes.Work with shop floor personnel to provide an understanding of work instructions.Oversee NPI sampling process.Maintain engineering records of tooling, procedures, and customer drawings. QUALIFICATIONSRequired Qualifications: Education: Bachelor’s degree in engineering or related field requiredExperience: Required: 1+ years in a manufacturing setting. Plus: 2+ years in sand or investment casting foundry.Other Required Knowledge, Skills & Abilities: Attention to detail, ability to communicate at all levels of the organization, working knowledge of SolidWorks (or equivalent CAD software), MS Office Suite (Word, PowerPoint, Excel), ability to work with others through complex situations. CPP-Boston is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Boston, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. This is a full time position

Overview: GovCIO is currently hiring for a Journeyman Unified Communications Deployment Engineer to provide telecommunications support to their local area, and travel around the US for unified communications deployment activities. This position is primarily located in Boston, MA and is an onsite position. Responsibilities: Performs a variety of electronic and technical assignments on data, telecom, and audiovisual communications equipment and systems. Completes endpoint troubleshooting using appropriate diagnostic equipment. Installs terminals, controllers, and test equipment and restores nonworking lines and/or equipment to working condition. Maintains liaison with outside vendors and orders circuits and/or equipment as required. Requires knowledge of specific hardware, test equipment, and terminal configuration. May develop recommendations for the combined usage of data processing and telephone system hardware and software.Conducts site surveys and meets contacts like clients, construction crew members, utility company personnel, and people from other departments within the Company.Installs, moves, commissions, and modifies audiovisual, telecommunications and related equipment according to job order specifications, standards, and procedures.Undertakes systems upgrades and answers queries related to system controls, and maintenance of the systems in general.Diagnoses equipment malfunctions. Maintains and repairs systems and equipment according to manufacturer recommendations and specifications.Reports and monitors service order changes.Be responsible for general local video operations and maintenance support as part of normal IT site support duties. This task does not include designing, engineering, specifying or acquiring video equipment. This support shall include basic troubleshooting of system problems and repairs, when they are identified by enterprise video support staff.Work with enterprise level voice and video engineers and technicians to conduct more detailed remote troubleshooting and repairs.Assist in setting up presentation devices and Video Conference units and provide basic troubleshooting support as needed. This includes ensuring functionality, being available for events, and shutting down video conferences.Perform local voice operations and maintenance support related to videoteleconferences. This support shall include basic troubleshooting of system problems and repairs whenthey are indicated by enterprise voice support staff. This task does not include designing, engineering,specifying or acquiring voice communications equipment.Provide on-call support by identifying, researching, and resolving technical problems received via the ServiceNow ticketing system.Interact with network services, software systems engineering, and/or applications development to restore service and/or identify and correct core problems. Perform routine system maintenance and analysis functions, including hardware configurations and adding, removing and replacing equipment components.Below is a non-comprehensive list of technologies that the technician may encounter. The ideal candidate will understand the purpose of these technologies and have some experience with them, or with equivalent technologies:Cisco IP audio and video endpoints, Unified Call Manager (CUCM), Expressway Meeting Server (CMS), Meeting Management (CMM), Telepresence Management Suite (TMS), Prime, and Identify Services Engine.Broadsoft CloudMicrosoft System Center Configuration Manager (SCCM)Avaya technologies including audio/video components, Communicator, One-X, Application Enablement Server (AES), and the following at version 6.0 or above: Communications Manager, Session/System Manager, and Aura Messaging.Polycom DMA, Real Presence, and endpointsSolarwindsSplunk (syslog)CyberArkICAM / Single Sign On methodologies (SSO) / CertificatesInfoBlox / AkamaiSIP routing, dial pattern and number translations, E.164 routing, PRI as well as standards-based codecs, to include codecs from Cisco and PolycomVideo Conferencing Services (VCS) infrastructureUnified Communications and Video conferencing, including but not limited to: Cisco Unified Communications Manager, Unity Connection, TEAMS, UCCX, Expressways, Jabber Client, SIP, H.323, and QoSSession Border Controllers (SBC), Cisco Unified Border Elements (CUBEs) Qualifications: High School with 0-3 years (or commensurate experience)Clearance Required: Must be able to obtain and hold a Public Trust ClearanceRequired Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesMust be prepared for regional travel up to 25% at customer locations.#NSS#NEON#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $70,000.00 - USD $70,000.00 /Yr.

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is looking for a Robotics Applications Engineer to join our Perception team. You will play a hands-on role in the design and implementation of the next generation of perception software for our mobile robots. The qualified candidate will play a hands-on role helping to bring our robotics solutions to our customers. We are looking for people who thrive in a creative, collaborative and agile development environment.What we do Our work matters – robotics is transforming the world of commerce. Every day our intelligent robots are responsible for getting food and merchandise to thousands of stores across North America. We’re an industry changer – we created the first and only fully autonomous, end-to-end supply chain solution. Today, we are driving towards even bigger ideas – and we have the people, technology, and leadership to fully realize these aspirations. We have the excitement and ambition of a startup with the benefits and resources of a proven organization.What you’ll doCollaborate with internal and external stakeholders to understand technical and business requirements.Design, develop, and maintain high-quality robotics applications for internal users and external customers.Develop and integrate solutions across various modules, including web-based dashboards, database, and robotics control.Create, execute, and maintain comprehensive test plans; identify and fix bugs while ensuring the integrity of the existing codebase.Contribute to system-level software design, ensuring scalability, reliability, and performance.Formulate, document, and maintain detailed requirements specifications.Analyze requirements and develop innovative solutions or effective workarounds to meet project needs.Identify potential project risks and proactively suggest and implement mitigation strategies.Up to 10% travel may be requiredWhat you’ll needBachelor or master’s degree in Robotics, Engineering, Computer Science, or a related technical field.Minimum 8 years of professional software development experience with Python and/or C++.Experience in database development using Kafka and Snowflake.Experience in messaging systems such as RabbitMQ and/or ZeroMQHands-on experience with ROS, Docker and Linux environments.Strong problem-solving skills and attention to detail.Familiarity with robotics remote operation and control applications is a big plusExperience in developing web-based applicationsExperience with project management and collaboration tools like JIRA, Confluence.Exposure to agile development practices and CI/CD pipelines.Familiarity with graphical user interfaces (GUI) developmentKnowledge of computer vision applications and libraries.Our EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationManage assigned projects to an on-time and on-budget completion to include new and takeover club locations; remodels and expansions; and new club gas facilities. This position is responsible for assisting and coordinating with real estate directors for the hiring of Consultant teams; representing the companies interests in public meetings and hearings; facilitating complete project approvals from State, Federal and local municipalities; the development of construction documentation that is in accordance with the company prototype, budget and schedule; on all assigned new club developments. Project involvement will range from Landlord reverse build-to-suits to full self-develop owned projects which may include surplus property for other retail uses. This position is to maintain a current schedule and budget update on all assigned projects and report same to real estate directors on an as needed basis.Utilize existing criteria for RFP's and solicit quotes for Consultant's scope of work with assistance from the real estate directors. Support real estate directors in developing conceptual site plans and establishing projectCoordinate efforts with the real estate directors of the project team through the conceptual design and due diligence phase of the project in order to establish the development feasibility, preliminary construction budgets and schedules. Support the Real Estate Directors negotiations by providing information/documentation necessary to complete the project. Assist and coordinate the development of approval and construction documents. Work with the project team to insure compliance with the project parameters, budget and schedule. Insure the accuracy and timeliness of document development. Attend working sessions and public hearings with state and local municipality staff to review projects and prepare for public hearings. Coordinate with the project team and insure that permits are issued; fees are filed; bonds are procured; and agencies are notified in advance of constructionSchedule and arrange project meetings with Consultants, Attorneys and BJ'sAdminister contract invoicing, amendments, change orders and close out documentation for allDevelop an entitlement timeline with the team to be incorporated into the overall project schedule. Coordinate the development of construction documents for the building, civil, off-site and gas in order to maintain the approved schedule for permitting and construction. Report the progress of project approvals in order to maintain an updated project schedule that management can rely on for scheduling club openings and events. Qualifications:Bachelor’s Degree in civil engineering required, 2 to 3 years’ experience in field. Retail Corporate or Civil Engineering Design firm experience a plus. General knowledge of land use planning/civil engineering principles and with Regulatory Agency/Municipal approval process. Familiarity with retail site design with understanding of soils, drainage, environmental and other related activities. Awareness of legal and environmental issues related to land. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $80,000.00

What this job involves:JLL is seeking an experienced HVAC professional with advanced expertise in Building Automation Systems (BAS), particularly Siemens Controls, for a cutting-edge role at a biotech company. This position is ideal for those looking to elevate their HVAC career by diving deep into the world of intelligent building systems. As our BAS Specialist, you'll be at the forefront of smart building technology, working with both new and legacy Siemens Controls. You'll collaborate closely with our controls team to design and implement state-of-the-art HVAC/BAS solutions that optimize energy efficiency and occupant comfort.What your day-to-day will look like:Develop complex control logic for HVAC systems.Implement advanced energy trending and analysis.Operate and troubleshoot sophisticated energy management equipment.Manage various BAS software applications.Design innovative HVAC solutions using the latest in building automation technology.Build strong relationships with stakeholders and clients.Evaluate and propose cutting-edge approaches to HVAC challenges.Collaborate with BAS control engineers to create tailored building management solutions.Develop and optimize programming logic for peak HVAC system performance.Diagnose and repair electronic control system issues.Consult with clients to address operational challenges and propose system enhancements.Provide expert training on BAS operations.Document job completions, training sessions, and system recommendations.Work Schedule: Dayshift, Monday – FridayDesired or preferred experience and technical skills:DESIGO and Siemens systems experience a plus!Associate degree in HVAC technology or related field.Experience with industry-specific software applications.Knowledge of various electronic/digital control systems and industry protocols (BACnet, Modbus).Familiarity with biopharmaceutical GMP environments.Understanding of Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).Experience with CMMS systems, particularly Maximo.Required Skills and Experience:High school diploma or equivalent, plus trade school or apprenticeship in HVAC.5+ years of experience in electronic control systems and HVAC equipment.Proficiency in Microsoft Office suite.Ability to work in various physical environments and handle equipment up to 50 pounds.Valid driver's license.This role offers a unique opportunity to work at the intersection of HVAC and cutting-edge building automation technology. Join us in shaping the future of smart, energy-efficient buildings in the biotech industry.Estimated total compensation for this position:90,000.00 – 115,000.00 USD per yearThe total compensation range is an estimate and not guaranteed. An employment offer is based on an applicant's education, experience, skills, abilities, geographic location, internal equity and alignment with market data.#HVACjobs

Job Description:Director, Software Engineer – Asset Management TechnologyThe RoleYou are an experienced engineering lead with a deep hands on experience of systems development, and a burning desire to unlock the capabilities of GenAI implementation in the context of a professional domain such as finance. You are excited about this opportunity to help lead an applied technical group conceiving of, building and delivering first-of-a-kind knowledge-based applications for investment professionals.You have prior experience in developing and designing to deliver production applications using rapidly evolving, powerful yet brittle AI technology. You are comfortable working in a quick time to market technical area where the lag between conceptualization, research and development, and productionization is optimized. You are skilled at working with senior business, architecture and engineering stake-holders, mentoring junior individual contributors, helping them grow and learn new skills in today’s fast-paced AI field. You possess excellent thinking process and technical skills and revel in working as part of a team to solve deep applied problems.You will have:A Bachelor’s or Master's Computer Science or relevant field (with a background in Machine learning is a plus), with ten years plus of industrial experience.An understanding of how to deliver into production GenAI applications that can reliably process information in open-ended settingsAdept in Python as the enterprise level development language.Mastery of design patterns and object-oriented programming techniques.Strong understanding of best practices for large scale application design, SOA, microservices, distributed compute, containers, and use of the cloud.Strong attention to detail, passion for careful and automated testing.Excellent communication skills and ability to work with distributed team membersA track record of managing the "exploration vs exploitation" tradeoff to deliver innovative solutions for first-of-a-kind problems.The TeamWe are developing a Large Language Model (LLM)-first knowledge stack for investment professionals at Fidelity Asset Management – analysts and portfolio manager in equities, fixed income, high income, direct lending. The stack will be able to process all the documents of interest to analysts – e.g., analyst reports, earnings notes, spreadsheet models, prospectuses, loan indentures, news reports, regulatory filings. It will support the deployment of personalized assistants that can assist principals in their full range of information consumption/processing/production tasks.Certifications:Category:Information TechnologyFidelity’s hybrid working model blends the best of both onsite and offsite work experiences. Working onsite is important for our business strategy and our culture. We also value the benefits that working offsite offers associates. Most hybrid roles require associates to work onsite every other week (all business days, M-F) in a Fidelity office.

.video-wrapper svg { top:40%; } U.S. - What we do mattersBy playing this video you consent to Google/YouTube processing your data and using cookies Learn more.Position Description:The security engineer / architects role is broader than what is commonly included in services and consultations. Specifically, we are looking for a senior security expert who is well-versed in network architecture, design, and general best practices related to IT infrastructure, application, and security practices. This position can be located at any CGI office in the U.S., preferred location is Boston, MA.Your future duties and responsibilities: Focused specifically on private cloud, server and AD migrations, and secure configurations in conjunction with clients Security Standards and Industry Best Practices. Document architecture and process flows and patterns. Collaborate with Security Enterprise Architects, Security Engineering, and GRC teams. Conduct security assessments and vulnerability testing. Conduct Risk Assessment to ensure alignment with company requirements and industry good practice. Document and raise risks as they are found. Assess and aid with Disaster Recovery architecture. Hands on keyboard working on Delinea, Entra, and various PowerShell scripts. Provide technical guidance and support to IT and security teams. Develop and deliver training and documentation for security practices. Collaborate with stakeholders to ensure security requirements are met. Stay up to date with the latest security trends and technologies. Participate in incident response and forensic investigations.Required qualifications to be successful in this role: Senior position (10 years experience in a related discipline, CISSP / CCSP preferred). 10 years of experience in IT security. Secrets Management (Delinea Secrets Server experience preferred) Preferred Agile methodologies (Scrum and Kanban). Strong understanding of security best practices and industry standards. Experience with training and documentation development. Windows Server administration and security experience. Linux (specifically RedHat RHEL) security experience preferred. Active Directory / Entra security including understanding of authentication, authorization, principle of least privilege, group policy, password policies, tiering (tier 0, 1, 2) etc. Azure Cloud, SailPoint, HPE Greenlake, RedHat OpenShift, and VXLAN experience a plus. Experience with zero trust network architectures. Key Competencies: Technical Expertise Strong communication and interpersonal skills Strong documentation and diagramming skills Security Risk Assessment and or audit Client Focused Continuous Improvement Attention to Detail Project Management Excellent problem-solving and troubleshooting skills. Certification and Licensure Relevant certifications (e.g., CISSP, CISM) are a plus. Application Architecture (COTS, Web applications, APIs, etc.) a plus. Understanding of certificates (particularly TLS) and PKI.#LI-TSCH1 CGI is required by law in some jurisdictions to include a reasonable estimate of the compensation range for this role. The determination of this range includes various factors not limited to skill set, level, experience, relevant training, and license and certifications. To support the ability to reward for merit-based performance, CGI typically does not hire individuals at or near the top of the range for their role. Compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range for this role in the U.S. is $119,500.00 - $209,100.00. CGIs benefits are offered to eligible professionals on their first day of employment to include: Competitive compensation Comprehensive insurance options Matching contributions through the 401(k) plan and the share purchase plan Paid time off for vacation, holidays, and sick time Paid parental leave Learning opportunities and tuition assistance Wellness and Well-being programsSkills:Account Mgt/Security-TechnicalCyb.Sec.Eng. (Sensor /Device)What you can expect from us:Together, as owners, lets turn meaningful insights into action.Life at CGI is rooted in ownership, teamwork, respect and belonging. Here, youll reach your full potential becauseYou are invited to be an owner from day 1 as we work together to bring our Dream to life. Thats why we call ourselves CGI Partners rather than employees. We benefit from our collective success and actively shape our companys strategy and direction.Your work creates value. Youll develop innovative solutions and build relationships with teammates and clients while accessing global capabilities to scale your ideas, embrace new opportunities, and benefit from expansive industry and technology expertise.Youll shape your career by joining a company built to grow and last. Youll be supported by leaders who care about your health and well-being and provide you with opportunities to deepen your skills and broaden your horizons. Come join our teamone of the largest IT and business consulting services firms in the world.Qualified applicants will receive consideration for employment without regard to their race, ethnicity, ancestry, color, sex, religion, creed, age, national origin, citizenship status, disability, pregnancy, medical condition, military and veteran status, marital status, sexual orientation or perceived sexual orientation, gender, gender identity, and gender expression, familial status or responsibilities, reproductive health decisions, political affiliation, genetic information, height, weight, or any other legally protected status or characteristics to the extent required by applicable federal, state, and/or local laws where we do business.CGI provides reasonable accommodations to qualified individuals with disabilities. If you need an accommodation to apply for a job in the U.S., please email the CGI U.S. Employment Compliance mailbox at . You will need to reference the Position ID of the position in which you are interested. Your message will be routed to the appropriate recruiter who will assist you. Please note, this email address is only to be used for those individuals who need an accommodation to apply for a job. Emails for any other reason or those that do not include a Position ID will not be returned.We make it easy to translate military experience and skills! Click here to be directed to our site that is dedicated to veterans and transitioning service members.All CGI offers of employment in the U.S. are contingent upon the ability to successfully complete a background investigation. Background investigation components can vary dependent upon specific assignment and/or level of US government security clearance held. Dependent upon role and/or federal government security clearance requirements, and in accordance with applicable laws, some background investigations may include a credit check. CGI will consider for employment qualified applicants with arrests and conviction records in accordance with all local regulations and ordinances.CGI will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with CGIs legal duty to furnish information.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Role Overview: Precise. Reliable. Powerful. Join a team as innovative as the technology we manage.Sodexo's Healthcare Technology Management (HTM) Division is looking for a highly skilled, confident, and punctual individual to fulfill an Imaging Service Engineer Irole forCape Cod HealthcareinHyannis, MA.The HTM Team offers ground-breaking clinical technology services to customers and much-deserved professional growth to personnel.The idealImaging Service Engineer 1will have outstanding customer service and communication skills, as well as a strong commitment to delivering excellent repair services in an expedient manner.Experience with high level imaging devices is a must.The Imaging Service Engineer I will possess:experience repairing, maintaining and calibrating medical imaging devices including X-rays, C-Arms, and others.1-3 years experience in an imaging roleexperience in a hospital or healthcare settingability to make decisions regarding troubleshooting and repairing medical imaging devicesprior knowledge of renowned medical equipment, preferably Philips, GE, etc.excellent communication, customer service and time management skillsability to participate in on-call rotation schedule as requiredSodexo offers a full array of benefits including paid time off, holidays, medical, dental, vision, 401K and access to ongoing training and development programs, tuition reimbursement, plus health and wellness programs.Working for Sodexo:How far will your ambition, talent and dedication take you Sodexo fosters a culture committed to the growth of individuals through continuous learning, mentoring and other career growth opportunities, along with the performance of organizations. We believe it is important for our work to be meaningful to all who contribute to it, and we remain faithful to our mission, our core values and the ethical principles that have guided us since 1966. We support these values and help them thrive in each employee.We strive to make working for Sodexo a genuinely great experience with benefits to promote your professional, personal, and financial well-being, and to improve your Quality of Life now and into the future. Our experiences with our over 50 million customers each day enable us to develop Quality of Life services that reinforce the well-being of individuals, improving their effectiveness and helping companies and organizations to improve performance every day.Not the job for you At Sodexo, we have HTM positions at numerous client locations across the United States.Continue your search for HTM jobs What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include:Medical, Dental, Vision Care and Wellness Programs401(k) Plan with Matching ContributionsPaid Time Off and Company HolidaysCareer Growth Opportunities and Tuition ReimbursementMore extensive information is provided to new employees upon hire. Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide.Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you’re happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form. Qualifications & Requirements: Minimum Education Reuqirement - Associates Degree (or equivalent experience) in electronics, biomedical engineering, or other technical discipline contributing to proficiency of maintenance and repair of imaging equipment within a healthcare environmentMinimum Functional Experience - 3 years of experience within a healthcare setting with direct responsibility for the maintenance and repair of clinical devices and/or 1 year of imaging equipment repair and maintenance within a healthcare environment and/or entry level of formalized training and/or equivalent military training

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a QualityEngineer! The Quality Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture! Major Responsibilities Coordinate with our customer’s Engineering, Quality, and Purchasing representatives, suppliers, and all departments and levels of CPP workforce providing, on a tactical level the technical support and the direction necessary to ensure compliance with the intent of customer quality expectations.Build an atmosphere of competence, cooperation and trust with customer representatives via Supplier Product, Systems and Qualification Surveys.Take active participation in our Continuous Improvement efforts, promote quality excellence, and encourage teamwork among ourselves and our customers.Be proactive, innovative, and creative using judgment and decision making in the implementation of necessary quality programs. Qualifications Bachelor’s degree from four-year college or university in Engineering or a related field; or one to two years related experience and/or training; or equivalent combination of education and experience.Must have a comprehensive knowledge of quality and quality systems, such as AS9100 orNADCAP.3 - 5 years of work experience in an foundry or related fieldFamiliarity with the investment casting industry and related processes is desirableStrong communication skills, good PC skills, program management skillsKnowledge of Six Sigma and Lean Manufacturing a plusAble to work independently with minimal directions Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This is a non-management positionThis is a full time position

Job Description:The Director of ML Ops Engineer at Fidelity Labs is a pivotal role for the continued success and growth of the Catchlight startup. Catchlight is a new software solution that helps financial advisors prioritize and optimize their leads and prospects. Catchlight launched in January 2022 and is now available to financial advisors across the United States. Visit https://catchlight.ai for more information.In this role you will be responsible for hands on building and maintaining the next generation ML platform and infrastructure. The Director of ML Ops Engineer will work closely with technical leads, infrastructure engineers and data scientists. They will establish best practices and lead initiatives to simplify the development and deployment of ML models at scale and bring game-changing ideas to market.The Expertise and Skills You Bring· Extensive software engineering experience including distributed systems and data infrastructure· Strong knowledge of Python, Pandas· Experience with ML infrastructure and ML ops· Building tooling and automation to support the entire ML engineering lifecycle from experimentation to production operations· Experience with the AWS stack, including AWS Sagemaker· Strong understanding of data science, core ML concepts and approaches· Passion for testing as a core part of the development process· You thrive in fast-paced, ambiguous environments with high risks and high rewardsThe TeamWe are Fidelity Labs, Fidelity Investments’ in-house fintech incubator with a mission to build new businesses to drive growth for Fidelity. We seek to shape the future of our industry by building new products and services to improve the lives of the diverse set of customers, businesses and financial institutions we serve.Fidelity Labs is a dynamic workplace that combines the best parts of startup lifebuilding from scratch, adapting quickly, and moon-shot ambitionwith the scale and stability of an industry leader. We provide a safe space for startup teams to explore new business ideas, quickly test them with customers, and scale the most promising concepts within an existing business unit, or as a new venture.This opportunity is brought to you by Fidelity Labs. Learn more at labs.fidelity.comCertifications:Category:Information TechnologyFidelity’s hybrid working model blends the best of both onsite and offsite work experiences. Working onsite is important for our business strategy and our culture. We also value the benefits that working offsite offers associates. Most hybrid roles require associates to work onsite every other week (all business days, M-F) in a Fidelity office.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Job Description:Chapter Leader, High Income and Alternatives Investment TechnologyThe RoleHigh Income and Alternatives Technology team is looking for an experienced, motivated, collaborative, and customer-focused Chapter Leader with a passion for coaching and leading engineering teams. In an agile structure you will collaborate with other leaders to establish the standards for your chapter, influence the strategic decisions and build solutions. You will directly lead a team of chapter members who primarily work within autonomous squads across product areas. You are committed to developing your own expertise and knowledge to bring the latest thinking to your role to empower others with that knowledge.The High Income and Alternatives Technology team manages and develops technology platform that supports our high yield investment team with over $100B of client assets in US high yield debt, emerging market debt and a growing list of high yield alternative credit products.Ensuring chapter talent composition and workforce planning aligns with strategic business prioritiesSupporting and empowering chapter members to enable delivery of increased value in their teams through continuous improvement and learningEnabling an agile and frictionless organization by demonstrating agile behaviorsProactively partnering with Chapter Area, Product Area, Center of Excellence, and Squad Leaders to:influence strategic backlog and prioritization decisionscollaborate with Product Area leadership team to reduce technical debt and modernize applicationsmeasure performance through established objectives and KPI’scontinuously focus on improving stability and resiliency of applications and batch processesrelentlessly work on improving engineering standards and qualityalign chapter members across squads and product areas to ensure the best utilization of talentbuild learning opportunities and learning day content to develop associate skillsset and apply standards and ensure the work performed is aligned with established road mapsremove impediments to delivering valueActively sharing insights, knowledge, industry practices and developments across the organizationThe Expertise and Skills You BringBachelor’s degree in MIS, Computer Science or related field10+ years of experience building various components of scalable enterprise applicationsTechnical leadership skills with a passion for engineering excellence, empowerment of individuals/team, innovation, continuous improvement, collaboration and must be someone who’s eager to learn and teach every day.Strong engineering mindset that will accelerate the team’s journey towards our goal of being services-oriented, cloud-based, and devops-enabledExperience leading, coaching, mentoring, and developing people and teams in an agile organizationSharing knowledge and expertise within and outside of the chapter - ensuring the 'how' of the work performed by chapter members is aligned with established road maps and guardrailsExcellent interpersonal and communication skills with which to build and maintain strong cross-functional relationships at all levels of the organizationFinancial services experience, preferredDecision making experience using a data-focused approach in day-to-day leadership situations and strategic tradeoff analysesUnderstanding of the Salesforce.com, Sales Cloud, Service Cloud and other Salesforce product areas is a plus.Certifications:Category:Information TechnologyFidelity’s hybrid working model blends the best of both onsite and offsite work experiences. Working onsite is important for our business strategy and our culture. We also value the benefits that working offsite offers associates. Most hybrid roles require associates to work onsite every other week (all business days, M-F) in a Fidelity office.