Interior Installerin GAC WestfieldInterior Installation Technician IIUnique Skills:See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.. Position Purpose:The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (which may include galleys, closets, lavatories, side ledges, bulkheads, doors and panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. . Use the material tracking system to create parts demand, track squawks and to sign-off work. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Prepare and install aircraft interior items in accordance with company operation procedures and quality standards. Remove and re-install nut plates, inserts and other fasteners used in aircraft interiors. Apply proper use of hardware and fittings on aircraft installations. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk. Assist technicians, under supervision, with aircraft maintenance requirements. Adapt to sudden schedule changes.Additional Functions: Work with lead and higher skilled technicians to develop and implement process improvements that reduce cost, cycle time, and man-hours using Lean Six Sigma and other process improvement techniques. . Make and use simple patterns for own use employing standardized procedures. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use hand/power tools and equipment associated with installation and removal of interiors. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be computer literate. Excellent communication skills, both verbal and written. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222701Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/22/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Job Description:Position Details:$26.00 per hour up to $35.00 per hour depending upon experience$2500 Sign On Bonus (Terms Apply) and $1000 Annual Tool Allowance4 Day Work Week! (Wed 11:30am – 5:30am / Thurs – Sat 11:30pm – 5:30am)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class B keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class B performs preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, and convertor dollies under minimal supervision. Responsibilities may include, but not limited to:Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and performs repairs as required.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:• High School Diploma/GED or State Approved Equivalent • 3 - 5 years experience of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in refrigeration.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.JOB SUMMARYWorking under close supervision, performs a variety of simple to routine assignments by following detailed work instruction that requires limited judgment and decision-making to complete.ESSENTIAL DUTIES AND RESPONSIBILITIES· Perform scheduled preventive maintenance.· Performs feeder maintenance, repair and data tracking.· Train employees in operation and maintenance of machinery.· May train and coordinate activities of MA.May provide assistance in the following areas:· Troubleshoot to determine problems in non-functioning electro-mechanical equipment used in the manufacturing process.· Dismantle, adjusts, repairs and assembles equipment according to layout plans, blueprints, operating or repair manual, rough sketches or drawings.· Uses test and diagnostic equipment to perform checkouts.· May be required to work overtime.· Comply and follow all procedures within the company security policy.· May perform other duties and responsibilities as assigned.JOB QUALIFICATIONSKNOWLEDGE REQUIREMENTS· Able to acquire job skills and learn company policies and procedures to complete routine tasks.· Must be able to read, write and communicate in English.· Use of basic and special purpose hand tools and leveling instruments. Knowledge of torque specifications.· Basic mathematics.· Understanding of electronic color codes and other component value markings.· Understanding of safety practices requirements.· Personal computer operation in a Windows environment (Excel, Word and PowerPoint and e-mail).· Use of specialized maintenance tracking programs.EDUCATION & EXPERIENCE REQUIREMENTS· Associates degree in electronics with emphasis in servo positioning theory or equivalent discipline.· Prior experience as MA may be substituted.· Zero to two (2) years work-related experience required, preferably in electro-mechanical equipment in a manufacturing environment.· Or an equivalent combination of education, training or experience.BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.#whereyoubelong#AWorldofPossibilities#EarlyCareer

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Shape the Future of Medical Technology with KARL STORZ!Are you an experienced engineer passionate about designing life-changing medical devices KARL STORZ is seeking a Senior Mechanical Engineer – Product Enhancement & Development to lead the development of cutting-edge flexible endoscopes and associated technologies. This is your opportunity to work on impactful projects that enhance patient care worldwide.What you’ll be doing:Lead the design, prototyping, testing, and production of new medical devices, focusing on flexible endoscopes and accessories.Drive product development from concept to production, ensuring on-time delivery with global cross-functional teams.Identify opportunities for product improvements, cost reduction, and production yield enhancements.Develop and refine test protocols, conduct data analysis, and lead root cause investigations.Collaborate with international engineering teams to implement design changes and maintain compliance with global medical device standards (FDA, ISO 13485, ISO 9001).What’s in it for me Innovative Environment: Work on groundbreaking products that improve patient outcomes.Global Impact: Collaborate with a diverse, international team to bring medical technologies to market.Career Growth: Advance your career with a company that values professional development and technical leadership.Global Experience: Opportunities for up to 20% travel (domestic and international) allow you to gain valuable global perspectives and work with diverse teams.Contribution to Health: Play a key role in developing life-saving medical devices, making your work impactful and rewarding.What you will need to be considered:B.S degree in Mechanical Engineering (or equivalent mechanical design-based degree). 9+ years of experience in design/project engineering.5+ years of experience in a medical device development.Strong expertise in SolidWorks, statistical analysis, and MS Project/Server.Proven track record in leading teams and delivering innovative product solutions.Experience in manufacturing transitions, process development, and prototype fabrication.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.Ready to make a difference Apply now and be part of a dynamic team at the forefront of medical innovation.#LI-BL1

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s staff, employees, and business relationships. Here, we believe there’s not one path to success, we believe in careers that grow with you. Whoever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide you with the opportunity to explore your curiosity and drive us forward. Sherwin-Williams values the unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. We’ll give you the space to share your strengths and we want you show us what you can do. You can innovate, grow and discover in a place where you can thrive and Let Your Colors Show! At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commuteit matters to us. A general description of benefits offered can be found at http://www.myswbenefits.com/. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity/Affirmative Action employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. Familiarize self with all products and procedures recommended in the Productivity Processes, including product application and preparation.Assist customer in proper selection and application of product to develop expert relationship.Support sales reps branch operations and distributors with technical and marketing assistance as needed.Develop knowledge/skills regarding sales techniques and methods.Assist in color verification and field color formulations.Assist Branch operations and distributors in internal training at all levels.Develop training aids and implement as needed to effectively communicate information.Assist customer in set-up and implementation of mixing systems.Allow self to be readily accessible to customer for advice/assistance.Build/manage relationships with sales reps/branches.Identify potential problems and establish solutions with sales support network.Give timely attention to customer comments and complaints and advise Area Sales manager, Branch Manager, and/or distributors of such.Possess knowledge of Sherwin-Williams’ competitive advantages.Act as key technical knowledge source by staying up to date on industry and product change.Control expenses, remaining within budget, and maintain required records/documentation and submit required reports, documentation, and summaries as required by management.Efficiently budget technical support calls to ensure the best use of time and company resources.Maintain accurate records of all demonstrations.Make delivery of product as needed ensuring customer’s quality and service expectations are met.Conduct self in professional manner to ensure customers’ quality and service expectations are met.Operate vehicle in accordance with all state and federal laws while maintaining an acceptable personal driving record.Adhere to company safety standards at all timesSuggests new products that are introduced if applicable.Implements or create procedures that will help the customer in avoiding issues or allow them to improve their process.Enter all calls in CRM with detailed and accurate comments.Troubleshoot product quality issues that may occur and implement solutions.Additional duties as assigned. POSITION REQUIREMENTS FORMAL EDUCATION: Required: High School Diploma or equivalent Preferred: Bachelor’s Degree in a business-related field KNOWLEDGE & EXPERIENCE: Required: Valid driver’s licenseAt least 3-5 years working with vehicle refinish processes and products Preferred: Prior sales experienceAutomotive aftermarket experience TECHNICAL/SKILL REQUIREMENTS: Required: Demonstrated ability to work with word documents and spreadsheetsDemonstrated high level of both verbal and written communication skillsDemonstrated ability to perform basic math calculations and financial ratios relative to a P&LDemonstrated ability to make independent decisionsEmployee may be required to retrieve material from shelves and floor stacks and lift and carry up to 100 lbs. onoccasion.Employee will spend approximately 45% of the day sitting (due to driving). Employee must be able to drive a car or van,since a major portion of this position is traveling from site to site.Must be able to tint paint, therefore, must be able to distinguish one or more chromatic colors.Employee must be able to tolerate non-toxic paint odors and be able to wear a respirator as required.Employee must be able to operate a hand truck and/or material handling equipment.Employee must be able to operate a computer and communicate via the telephone. TRAVEL REQUIREMENTS: (TIME SPENT AWAY FROM HOME OR OTHER TYPICAL OFFICE LOCATION) 75%

We are looking for a Tire and Lube Technician with a passion to service vehicles. If this is, you and you’re ready for your next destination then you have cruised to the right spot! Apply today and shift your career into drive for tomorrow! Wage: $19.50/hr Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel,Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Credit Union Access Health & Wellness benefits Tuition Reimbursement Pet Insurance Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferred Professional Experience: Entry level position with no required experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMinimum tools needed for the job.3/8” and ½” impact wrenchSockets wrench - metric and standard - preferably long and short lengths.Oil Filter wrenches and toolsTPMS tool - reset tire sensorsCombo wrenchesScrewdriversMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1128#

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Mechanic candidates to join our team in Stafford Springs CT!Shift: 3rd Shift (Monday - Friday; 11pm – 7am) At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Mechanic, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Maintaining all plant systems, which includes processing, packing, warehouse and facility operations.Installing, troubleshooting, and repairing mechanical, pneumatic, and hydraulic systems.Troubleshooting and repairing gear boxes, transmissions, pulley systems, etc.Disassembling and reassembling of machinery and various other mechanical drives.Entering Work Orders and inventory via SAMS, SAP or other MRP system.Assisting with Preventative Maintenance, continuous improvement, Kiazen events, and Lean eventsOperating safely by observing all plant safety rules and regulationsOperating and maintaining all material handling equipment (including PIVs)Performing other assignments as directed by supervision and leadershipPossessing the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:High School Diploma/GED or higher (completed prior to start)One (1) year experience as a Maintenance Mechanic in a manufacturing environmentAbility to work 3rd Shift (Monday - Friday; 11pm – 7am)Additional qualifications that could help you succeed even further in this role include:Professional certifications, military background or an Associate degreeThree (3) to five (5) years’ experience as a Maintenance Mechanic in a manufacturing environmentPossess strong mathematical skills and be a good problem solverAbility to read instructions, simple drawings or sketchesPIV certification (will train as needed)High Lift experience (will train as needed)Work location: Onsite - 32 River Rd, Stafford Springs, CT 06076Travel: No TravelRelocation Assistance: Not authorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $29.84, with the potential to reach $29.84 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

Maintenance Technician, Level I Career Opportunity - Full-Time Acknowledged for your proficiency as a Maintenance TechnicianAre you a skilled Maintenance Mechanic seeking a career that combines your technical expertise with a sense of purpose Look no further! Encompass Health is looking for skilled Maintenance Mechanics seeking purposeful careers. Join us as a crucial member ensuring facility reliability and functionality, contributing to a workplace close to home and heart. Be the driving force behind maintenance, ensuring a secure environment for patients, visitors, and staff. Your role spans executing preventative maintenance, repairs, and tasks across hospital systems, including equipment, utilities, plumbing, electrical, HVAC, as well as light construction, painting, groundskeeping, security, and floor care. Ready to make a meaningful impact while leveraging your craft Explore this opportunity with us and help keep our operations running smoothly. A Glimpse into Our WorldAt Encompass Health, you'll experience the difference the moment you become a part of our team. Working with us means aligning with a rapidly growing national inpatient rehabilitation leader. We take pride in the growth opportunities we offer and how our team unites for the greater good of our patients. Our achievements include being named one of the "World's Most Admired Companies" and receiving the Fortune 100 Best Companies to Work For® Award, among other accolades, which is nothing short of amazing. Starting Perks and BenefitsAt Encompass Health, we are committed to creating a supportive, inclusive, and caring environment where you can thrive. From day one, you will have access to:Affordable medical, dental, and vision plans for both full-time and part-time employees and their families.Generous paid time off that accrues over time.Opportunities for tuition reimbursement and continuous education.Company-matching 401(k) and employee stock purchase plans.Flexible spending and health savings accounts.A vibrant community of individuals passionate about the work they do! Become the Maintenance Mechanic you always wanted to beSafely and effectively test and operate emergency power supply system (EPSS) and its components.nstall/maintain/repair mechanical, electrical, HVAC, pneumatic, oxygen, and telephone systems.Work independently in the specified time frame as assigned per job task under the direction of the supervisor.Retain auto, carpentry, phone, pneumatics, stationary engineer, hydraulics, and computer skills.Plan, interpret, examine, draw, and record work; report daily completion to supervisor.Perform all types of control maintenance, building construction and repair, and equipment overhaul within required time frame.Maintain a working knowledge of all facility systems and all applicable regulatory standards. QualificationsLicensing in a specialty field such as electrical, plumbing, or HVAC is preferred.Valid driver's license may be required.High school diploma or equivalent work experience preferred.Previous experience in preventative maintenance, equipment repair, HVAC, plumbing, electrical, and/or construction required. Healthcare experience is a plus.May be required to work weekdays and/or weekends, evenings and/or night shifts if needed.Ability to lift, lower, push, pull, and retrieve objects weighing a minimum of 50 pounds.Must demonstrate the ability to tolerate frequent position changes such as twisting, stooping, reaching, squatting, kneeling, pushing/pulling, and bending positions for complete shift.Ability to work on ladders and scaffolds and be able to sit, stand, and walk for momentary to extended periods of time.Ability to safely work with hazardous materials. The Encompass Health WayWe proudly set the standard in care by leading with empathy, doing what's right, focusing on the positive, and standing stronger together. Encompass Health is a trusted leader in post-acute care with over 150 nationwide locations and a team of 36,000 exceptional individuals and growing!At Encompass Health, we celebrate and welcome diversity in our inclusive culture. We provide equal employment opportunities regardless of race, ethnicity, gender, sexual orientation, gender identity or expression, religion, national origin, color, creed, age, mental or physical disability, or any other protected classification.We're eagerly looking forward to meeting you, and we genuinely mean that. Join us on this remarkable journey!

The licensed HVAC Tech inspects, maintains, repairs, modifies, improves, and operates central heating, ventilating, refrigeration and air conditioning systems to insure proper functioning at all times.Hours: 40 hours per week.Monday-Friday Day shift 7am-3:30pmRotating weekends, Holidays and On-call shifts requiredWork Locations: Lowell General Main & Saints CampusesGuaranteed Hours!Must be able to travel between campuses - 2 miles apartMinimum Qualifications:1. High school diploma or equivalent.2. Current HVAC/Refrigeration License.3. Three (3) years of experience as an HVAC Technician.Duties Include1. Performs installation, preventative and corrective maintenance on a variety of HVAC and refrigeration systems.2. Responds to, evaluates, and rectifies problems with HVAC equipment and systems, pneumatic and digital controls, refrigerators, freezers, ice machines, and other miscellaneous HVAC and refrigeration equipment3. Follows work orders, drawings, diagrams, other specifications and/or verbal instructions.4. Plan, install, inspect, test, and maintain/repair systems and/or equipment.5. Check completed work to ensure system/equipment is properly functioning.6. Develop and follow preventative maintenance schedule.7. Responds to repair calls, analyzes problems and makes recommendation for and/or repairs.Why Join Us Competitive salaries & benefitsMedical, Dental and Vision benefits start day one403(b) Retirement with company matchTuition ReimbursementOpportunities for career growthneed it most. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at .

Job Profile Summary This role focuses on activities related to the support services functions, such as dietary and food services, environmental services, general facilities, repair and maintenance, parking, sterilization and transportation to ensure all required support activities are completed in a timely manner and meet the organization's quality standards and expectations. In addition, this role focuses on performing the following General Facilities, Repair & Maintenance duties: Operates, monitors and maintains, troubleshoots, repairs and replaces facilities mechanical components and systems such as electrical equipment, HVAC (heating, ventilation and air conditioning) and plumbing. A technical role that accomplishes work through a specialized knowledge or skills gained through a combination of vocational education, training, apprenticeship (craft, skilled and semi-skilled), and experience. A senior level role that requires broad knowledge of operational procedures and tools obtained through extensive work experience and requires vocational or technical education. Works under limited supervision for routine situations, problems typically are not routine and require analysis to understand, provides assistance and/or may lead and train lower level employees and may lead daily operation activities.Job OverviewInspects, maintains, repairs, modifies, improves, and operates central heating, ventilating, refrigeration and air conditioning systems to insure proper functioning at all times.Job DescriptionMinimum Qualifications:1. High school diploma or equivalent.2. Current HVAC/Refrigeration License.3. Three (3) years of experience as an HVAC Technician.Duties and Responsibilities: The duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned.1. Performs installation, preventative and corrective maintenance on a variety of HVAC and refrigeration systems.2. Responds to, evaluates, and rectifies problems with HVAC equipment and systems, pneumatic and digital controls, refrigerators, freezers, ice machines, and other miscellaneous HVAC and refrigeration equipment3. Follows work orders, drawings, diagrams, other specifications and/or verbal instructions.4. Plan, install, inspect, test, and maintain/repair systems and/or equipment.5. Check completed work to ensure system/equipment is properly functioning.6. Develop and follow preventative maintenance schedule.7. Responds to repair calls, analyzes problems and makes recommendation for and/or repairs.8. Maintain necessary records and reports. Requisition necessary equipment and supplies. Move materials as necessary in the performance of duties or as directed. Detect and report improper operation, faulty equipment, defective materials and unusual conditions to proper supervision9. Maintain work area in a clean and orderly condition.10. Follow safety rules and regulations.Physical Requirements: 1. Physical ability to lift heavy equipment and tools, climb ladders, carry supplies, moderate to strenuous.2. Frequent exposure to dust, hot and cold temperatures.3. Repeated bending, squatting, stooping. Prolonged standing and walking. May be exposed to hazards from use of electrical, electronic, mechanical equipment and power equipment..Skills & Abilities:1. Ability to read and comprehend blueprints.2. Ability to effectively communicate verbally and in writing.3. Ability to read and comprehend written instructions.4. Technical knowledge of mathematics and measurements.5. Ability to read and write English.6. Ability to solve complex problems.7. Ability to operate hand and stationary power tools in a safe manner.8. Ability to concentrate and comprehend details. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at .

Tufts Medicine is a leading integrated health system bringing together the best of academic and community health care to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, Melrose/Wakefield Healthcare, an expansive home care network and a large clinically integrated physician network,Tufts Medicine has more than 15,000 dedicated employees and caregivers.Why Join Us Competitive salaries & benefitsMedical, Dental and Vision benefits start day one403(b) Retirement with company matchTuition ReimbursementOpportunities for career growthJob OverviewInspects, maintains, repairs, modifies, improves, and operates central heating, ventilating, refrigeration and air conditioning systems to insure proper functioning at all times.Location: Tufts Medicine TMC - 800 Washington Street - Boston, MAHours: Days shift - 40 hours - 6:45am - 3:15pmMinimum Qualifications1. High school diploma or equivalent.2. Current HVAC/Refrigeration License.3. Five (5) years of experience as an HVAC Technician.Duties and ResponsibilitiesThe duties and responsibilities listed below are intended to describe the general nature of work and are not intended to be an all-inclusive list. Other duties and responsibilities may be assigned.1. Performs installation, preventative and corrective maintenance on a variety of HVAC and refrigeration systems.2. Responds to, evaluates, and rectifies problems with HVAC equipment and systems, pneumatic and digital controls, refrigerators, freezers, ice machines, and other miscellaneous HVAC and refrigeration equipment3. Follows work orders, drawings, diagrams, other specifications and/or verbal instructions.4. Plan, install, inspect, test, and maintain/repair systems and/or equipment.5. Check completed work to ensure system/equipment is properly functioning.6. Develop and follow preventative maintenance schedule.7. Responds to repair calls, analyzes problems and makes recommendation for and/or repairs.8. Maintain necessary records and reports. Requisition necessary equipment and supplies. Move materials as necessary in the performance of duties or as directed. Detect and report improper operation, faulty equipment, defective materials and unusual conditions to proper supervision9. Maintain work area in a clean and orderly condition.10. Follow safety rules and regulations. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at .

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Sprinkler systems including, wet/dry, pre-action, deluge, fire pumps, fire hydrants and backflow prevention devices, life safety product lines as well as similar competitive manufacturers’ product lines.How you will do itHigh School Diploma or Equivalent.NICET I certification or ability to obtain within 1 year of hire.Able to obtain and retain any licenses that are required by National, State, and Local codes.Experience with hand tools and multi-meter usage.Capable of performing physical labor to include carrying and moving equipment and tools up to 50 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding, and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Demonstrate a high level of customer service.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, a positive attitude, and an ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test..What we look for5+ years of documented experience in sprinkler systemsKnowledgeable of NFPA 25 & NFPA 13 and ability to reference material during inspections.Able to obtain and retain any licenses that are required by National, State and Local codes.Experience with wet, dry, pre-action, deluge, fire pumps, fire hydrantsExperience in reading and interpreting blueprints, diagrams, submittals, specifications, programs schematics and operational/product manuals.Experience with hand tools and multi-meter usage.Capable of performing physical labor to include carrying and moving equipment and tools up to 50 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Ability to work flexible hours including on-call rotation, nights, and weekends to meet customer requirements.Demonstrate a high level of customer service.Ability to adhere to, implement, and follow safety guidelines and procedures at all times.Strong organizational skills, positive attitude, and an ability to learn quickly.NICET II certification

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Priv is the leading on-demand beauty and wellness service app that delivers professionals straight to our client’s door for hairstyling, makeup, massage, nail, facial, spray tan, ear piercing, and fitness services. We currently serve 30+ markets in the United States! We are seeking talented and professional Makeup Artists to join our community of freelance pros in your area. Be a part of our loyal team of professionals, committed to transforming the beauty and wellness industry by delivering clients a luxury experience anywhere, anytime. We work with YOUR availability; you never have to take an appointment that doesn't fit into your busy life. Earn additional income doing what you love and meeting new clients! Why Priv “I've been with Priv for 4 years and love the team, flexibility and company. Would never work anywhere else!” - Prv Professional Be an independent contractor and work when and where you wantHave the freedom to work for other apps or salonsPriv is a one-stop-shop to offer all of your services We offer competitive rates and compensation Attend professional development workshops to help you grow in the industry Build lasting relationships with clients and other beauty and wellness professionals Participate in industry level events, premiers, trade shows, and fashion shows Pay: $70 - $100 per hour https://gopriv.com/

Clean HarborsWeymouth, MAis looking for aCertified Welderto join their safety conscious team!The Certified Welders are responsible for the maintenance and repair of all certified related welding for specialized assets (i.e., tank trailers and straight tank trucks which carry US DOT spec tank ratings). Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching componentOpportunities for growth and development for all the stages of your careerAccess to company paid OEM certifications and trainings!Generous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and tooling Speak with a recruiter today to learn more!! Key Responsibilities: Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Perform all required maintenance and repairs to various types of rental equipment while working within the budget provided to you by managementEnsure all equipment in need for repair has been approved for repair by the Shop Supervisor or ManagementFabricates components by using equipment to clean, prepare, cut, burn, and weld pieces; setting-up and measuring assemblies; selecting appropriate method.Provide insight and offer suggestions to assist the Shop Supervisor and Management with implementation and revision of any required training documentsTrain and mentor shop welders/fabricators in addition to certified welder/apprentices as requiredPerform other welding/ fabrication / assembly related repairs as neededAssist Shop Supervisor to track inventory and maintain cost controls monthlyEnsure the shop area is kept clean, tidy and free of hazards always as per office expectations, reporting all hazards and near misses as appropriate What does it take to work for Clean Harbors 5-7 years of experience in a shop environment and experience working as a welder on and/or around various types of equipmentAbility to work in team environment.Proficient in the use of multi-process welding equipment (ie. GTHW, SMAW, GMAW, PAC)Ability to work well under with little supervisionAbility to oversee, coach and mentor welders / fabricators as neededR Stamp certification (Preferred) 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company For Women To Work For in Transportation” *CH #LI-KB1

Come to work and be ready to think on your feet, grow your skills, and embrace the many opportunities. Our Distribution Centers are the key to getting new products out to TJ Maxx, Marshalls, HomeGoods, Sierra, Winners, Homesense, and TK Maxx. To keep up with our ever-changing inventory, we stay nimble and adaptable. No day is the same, and that’s just how we like it. Every shift is a new opportunity to Discover Different - and support each other along the way.Location: 135 Goddard Memorial Dr. Worcester MA 01603MAINTENANCE MECHANICWork ScheduleIn Person: Monday-Friday 6:30 PM - 2:45 AM Who you are working for Come Discover Different at TJX, we think you’ll find that it’s so much more than a job.At the TJX Companies, Inc., you'll not only enjoy the security of working for a stable and profitable industry leader, but you'll also enjoy the amazing company culture, and that’s just the beginning. Our Distribution Centers are the key to getting new products to our stores, we move a lot of inventory at all times of the day and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.What’s In It for You Competitive wages Culture that prioritizes health & safetyClean and climate-controlled workspacePaid vacation and sick timeBenefits including medical, dental, and vision insurance, 401k and 401k match, Associate discountUnion EnvironmentWhat you’ll be doing:The Skilled Tech Mechanic assists in the installation, maintenance, repair, and fabrication of DC equipment and facilities under the direct supervision of the Maintenance Supervisor. Recommend solutions for problems and poses the ability to work independently on routine problems/minor repairs. Be on call for emergencies while working, ability to handle multiple projects and daily activities, and meet timelines. Job responsibilities include:Must be able to use hand and power tools and other equipment as necessary to complete assignments including building maintenance, electrical wiring, conveyor repairs, packaging equipment, and hydraulics. Proficiently operate various power industrial trucks safely and efficiently.Possess and demonstrate carpentry skills to include fabrication projects of various materials.Recommends and implements improvements to equipment, operations and procedures and safety as appropriate.Supports maintenance manager, supervisor, and clerk to spec out and orders parts, and help maintain inventory of spares.Facilities testing according to preventative maintenance schedule and report findings and make repairs to keep all building and material handling systems operational.Requirements:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.Requirements Continued:Experience in industrial maintenance field with demonstrated preventative maintenance experience in material handling systems.Proven proficiency in three or more of the following areas; electrical/electronics, welding/fabrication, plumbing, electro hydraulics, mechanical and electrical drive systems, PLC controlled systems.Familiarity with OSHA/NFPA/NEC standards Understand and knowledgeable of MSDS sheets.Ability to grasp, bend, and lift or otherwise move items weighing up to 75 pounds.Ability to speak and write in EnglishGood communications and writing skills.Proficient in Mechanics Math (included but not limited to fractions & formulas)Capable of completing all company forms and paperworkAbility to work at heights or unusual work positions.Must be able to work from written and oral instructions. Trained in reading mechanical and/or electrical schematic drawings, sketches, manuals, and specifications.Must be able to operate all shop equipment and hand tools. Operate various types of welding equipment.Must maintain housekeeping standardsMust maintain OSHA Power Equipment CertificationMust maintain safe work practices.WORK ENVIORNMENT:Frequent exposure to lubricants, chemical vapors, aerosols, and other physical demands requiring certain levels of tolerance for working in adverse conditions i.e., noise, dust, heat, weather, conditions is necessary.Come Discover Different at TJX - we think you’ll find that it’s so much more than a job. We move a lot of inventory - at all times of the day - and that takes working, learning, and growing together. When you’re a part of our TJX family, you have the full support of a diverse, close-knit team in our Distribution Centers.As you think about where to work, know that we take care of our people. We offer competitive pay and great benefits. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Job Description:Position Details:$34.00 per hour up to $45.00 per hour, depending on experienceNOW OFFERING$7,500Sign On Bonus (Terms apply) andWork Boot vouchers5 Day work weeks - Flexible work hours between 12pm - 8:30am (2nd or 3rd shift)We Deliver the Goods: Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class A keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities:The Diesel Technician – Class A diagnoses and repairs medium to heavy-duty trucks, trailers, reefer units, convertor dollies and maintenance vehicles under minimal supervision. Responsibilities may include, but not limited to:Completes overhauls and rebuilds of heavy-duty diesel engines and transmission.Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and perform repairs as required.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating conditions.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 5 - 7 years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and a minimum of 2 years’ experience in refrigeration &/or overhauls and rebuilds of heavy-duty diesel engines and transmissionsCompany descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Lead Avionics Technicianin GAC WestfieldUnique Skills:Day Shift Position.See Job Description for details.Education and Experience RequirementsHigh School Diploma or GED required. 2 years experience on large/mid-size aircraft. 8 years experience in aircraft avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and six (6) years related experience. FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. FCC license or NCATT certification preferred. Position Purpose:Plans and coordinates all electrical/avionics activities and provides customers with daily information on aircraft schedules, repairs, parts, components shipped to vendors, etc. Works with hangar management to coordinate electrical/avionics activities and schedule aircraft requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plans, schedules, and completes tasks on work authorizations in order to meet the master schedule. Provides daily status reports and progress schedules to management. . Coordinates efforts of Electrical and Avionics activities to meet aircraft schedules and deadlines. Reviews work, including forms and records, to ensure compliance with Site Inspection Procedures Manual, Site Operating Procedures and FARs. . Supervises and instructs electrical technicians with technical guidance and proper procedures of troubleshooting electrical/avionics systems, routine inspections and preventive maintenance. Provides input to subordinate performance appraisals and submits them to management for review. . Reviews daily job charging for all personnel (including support groups) to ensure accuracy of inputs. . Maintains a preventive maintenance program on test equipment, hand tools, and special tools. Maintains a current knowledge of Aircraft Service Changes (ASC), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Supervises a continuous safety program in hangar area which includes operation of support equipment, aircraft systems and general housekeeping. Maintains required. logs and records. Enforces the company FOD, tool control, 5-S programs and all safety regulations. . Able to adapt to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Establishes and fosters an environment of innovation and Lean oriented thinking. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must have thorough knowledge of aircraft systems, troubleshooting, technical manuals systems, and aircraft maintenance records system. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret electrical/avionics system drawings and blueprints. Must have demonstrated leadership ability. Excellent communication skills, both verbal and written. Demonstrated ability to plan, organize, implement and obtain objective with minimal direction. A good understanding of PC, Windows and main frame computer applications including the use of standard computer word processing programs (i.e. Microsoft Word) and appropriate typing skills a plus. Must be able to climb ladders and stairs, work in small-space restricted area, and lift up to 100 pounds. Ability to use hand tools and avionics test equipment. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223618Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/27/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

The CNC Machining/Manufacturing Engineer at KARL STORZ provides hands-on engineering support to the Advanced Machining Center in Franklin, MA, producing high-quality components for medical devices. The role focuses on continuous improvement, process implementation, and solving machining problems. It also supports the introduction of new products, processes, and equipment.What's in it for me :Technical Mastery: Enhance your expertise in CNC programming, automation, and machining technologies while working with advanced equipment and processes.Innovation and Problem-Solving: Lead continuous improvement initiatives, develop solutions for machining challenges, and play a key role in the introduction of new products, equipment, and processes.Cross-functional Collaboration: Work closely with R&D, Project Engineering, Quality, and Operations teams, giving you exposure to various disciplines and broadening your skill set.Leadership Opportunities: Take ownership of projects like equipment qualification, process optimization, and cost-reduction strategies, driving significant impact in the manufacturing process.Career Growth: Gain valuable experience in cutting-edge areas like cobot integration, machine learning, and automation, positioning yourself for future leadership roles in manufacturing engineering.What you'll be doing:Collaborate with R&D, Operations, and Quality teams to launch and support manufacturing processes.Design and qualify tooling and fixtures for machining.Troubleshoot and validate existing processes and equipment.Insourcing of new parts and selecting/qualifying equipment (IQ/OQ/PQ).Optimize product line layout and implement flow and quality improvements.Lead cost reduction initiatives and author Engineering Change Orders (ECOs).What you need to be considered for this role:BS in a Technical/Engineering discipline.Extensive experience in CNC machining process development, automation, and programming.Proficient in problem-solving methods like Six Sigma, Kaizen, and DMAIC.Ability to design and qualify tooling, fixtures, and equipment.Proficiency in Solidworks, SPC, GD&T, and process yield improvement analytics.Additional experience that would make you stand out:Experience working with international teams and willingness to travel.Knowledge of cobot integration, machine monitoring, and learning systems.PLC programming, troubleshooting, and HMI/SCADA experience.Background in Quality Control and inspection processes.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we've pioneered the most groundbreaking innovations in endoscopic surgery, video imaging, and OR integration to benefit patients and healthcare providers alike.With a 9000+ employees worldwide, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support. In doing so, we help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes.It's not just about the tools we createit’s about the lives we change, together.#LI-BL1

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1128#

We are looking for Automotive Technicians with a passion to service vehicles. If this is, you and you’re ready for your next destination then you have cruised to the right spot! Apply today and shift your career into drive for tomorrow! Wage: $27.00/hr Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel, Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Credit Union Access Health & Wellness benefits Tuition Reimbursement Pet Insurance Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferredTrade School Preferred Professional Experience: At minimum three (3) years of vehicle maintenance experience Knowledge: Must be able to perform vehicle repairs without oversightAbility to repair vehicles independently, while also having experience working well in a team environmentExperience using shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Technician candidates to join our 2nd Shift team in Stafford Springs CT!Shift: 2nd Shift (Tuesday - Saturday; 3pm - 11pm)At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Providing support for basic maintenance tasks, preventative maintenance, facilities maintenance, audits, demolition, service to production tasks, and assisting skilled maintenance craftsAssisting in the documentation and implementation of maintenance proceduresEntering Work Orders and inventory via SAMS, SAP or other MRP systemSupporting daily wastewater treatment plant operationsAssisting Plant Engineering or performing other assignments as directed by supervision and leadershipYour Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:High School Diploma/GED or higher (completed prior to start)One (1) year of manufacturing, construction or military work experienceAbility to work 2nd Shift (Tuesday - Saturday; 3pm - 11pm)Ability to wear a respiratorAdditional qualifications that could help you succeed even further in this role include:Experience in a manufacturing plant environmentPossess or currently pursuing certifications or an AS degree targeting a Plant Maintenance careerPIV certification (will train as needed; must certify within 60 days)High Lift experience (will train as needed; must certify within 90 days)Possess strong mathematical skills and be a good problem solverAbility to read instructions, simple drawings or sketchesWork location: Onsite - 32 River Rd, Stafford Springs, CT 06076Travel: No TravelRelocation Assistance: Not authorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The starting rate of pay for this position is $29.84, with the potential to reach $29.84 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

HVAC TB Journeymen Mechanic I**** Must be a member or willing to join a local Union****What you will do:Johnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do it:We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look for:RequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing.Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors.Able to use vibration equipment to trouble shoot drivelines.Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting.You will work with other local market mechanics as well as Servicemen and apprentices.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Are you experienced in Building Maintenance Come and join our team! Tufts Medicine is a leading integrated health system bringing together the best of academic and community health care to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, Melrose/Wakefield Healthcare, an expansive home care network and a large clinically integrated physician network,Tufts Medicine has more than 15,000 dedicated employees and caregivers.Why Join Us Competitive salaries & benefitsMedical, Dental and Vision benefits start day one403(b) Retirement with company matchTuition ReimbursementOpportunities for career growthLocation: Tufts Medical CenterHours: 40 hours per weekSunday: 7am-3pMonday & Tuesday: 3pm - 11pmWednesday & Thursday: 11pm - 7amJob OverviewPerforms a variety of general maintenance, preventative maintenance, inspection, servicing, repair, overhaul and construction duties in all hospital buildings and grounds areas.Carries out tasks within capabilities involving a variety of maintenance crafts such as sheet metal, plumbing and pipe fitting, carpentry, tile setting, painting, electrical, roof maintenance,etc.Keeps supervisor informed of activities, needs and problems.Assumes responsibility for the control and security of the hospital lock and key system.Minimum Qualifications:1.High school diploma or equivalent.2.One (1) year of building maintenance.3.Valid driver’s license.Duties and ResponsibilitiesTheduties and responsibilities listedbeloware intended to describe the general nature of workandare not intended to be an all-inclusive list.Other dutiesand responsibilitiesmay be assigned.1.Worksfrom written and verbal instruction using prints, specifications, sketches,chartsand formulas to perform duties.2.Duties involve repair,replacementand installation of identified components of hospital infrastructure.3.Useswelding equipment, plumbing equipment, tools, hand and bench grinders, power drills, andnumeroushand and power tools necessary to the performance of duties.4.Maintainsnecessary records. Move materials and supplies as necessary in the performance of duties or as directed. Detect and report improper operations, faulty equipment, defective materials, and unusual conditions to supervisor.5.Maintainswork area in a clean and orderly condition. Follow furnished safety rules and regulations.6.Submitsassigned Preventative Maintenance Planned Work Orders within assignedtimeframe.7.Respondsto Daily Demand Work Orders produced by Service Response System.8.Participatesin all snow removal and sanding functions. Tufts Medicine is a leading integrated health system bringing together the best of academic and community healthcare to deliver exceptional, connected and accessible care experiences to consumers across Massachusetts. Comprised of Tufts Medical Center, Lowell General Hospital, MelroseWakefield Hospital, Lawrence Memorial Hospital of Medford, Care at Home - an expansive home care network, and large integrated physician network. We are an equal opportunity employer and value diversity and inclusion at Tufts Medicine. Tufts Medicine does not discriminate on the basis of race, color, religion, sex, sexual orientation, age, disability, genetic information, veteran status, national origin, gender identity and/or expression, marital status or any other characteristic protected by federal, state or local law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation by emailing us at .

Job Description:Position Details:$30.00 per hour up to $35.00 per hour depending on experienceNOW OFFERING$7,500Sign On Bonus (Terms apply) andWork Boot vouchers5 Day work weeks - Flexible work hours between 12pm - 8:30am (2nd or 3rd shift)We Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:We value the safety of our associates! The Diesel Technician - Class B keeps our associates safe by repairing, maintaining, and overhauling all company fleet diesel equipment to ensure a safe operation for associates’ usage and ensure compliance standards are met.Primary Responsibilities: The Diesel Technician – Class B performs preventative maintenance of medium to heavy-duty trucks, trailers, reefer units, and convertor dollies under minimal supervision. Responsibilities may include, but not limited to:Completes and performs preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units). Identifies root cause of basic failures/conditions and performs repairs as required.Ensures equipment has required licensing and registration prior to being deemed as “roadworthy”.Completes thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system.Installs, replaces, and repairs onboard computers.Inspects brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts.Performs routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists.Trains/provides guidance to other Mechanics.Performs other related duties as assigned.Qualification:High School Diploma/GED or Equivalent 3 - 5 years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and experience in refrigeration.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Aviation Safety Inspectorin GAC WestfieldAirworthiness Inspector A&P.$3,000 Signing Bonus.Unique Skills:2nd shift position (Tuesday - Friday)Gulfstream large cabin experience preferred.Flight Safety Initial course completion preferred.Must be able to occasionally work in confined spaces.Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant License required. 4 years aircraft experience on large/mid-size aircraft. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Position Purpose:The Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Responsible for all Quality Control inspections on aircraft/components in the Repair Station. . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. . Keeps accurate, neat and legible records of the work performed on aircraft/components. . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. . Ensures aircraft/components are airworthy prior to any flight activities. Mentors technicians on effective documentation.Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules. . Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. . Completes FAA required. conformity inspections and complies certification data for presentation to the FAA for approval. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Strong written and verbal communication skills. Must be able to prioritize tasks. Strong computer skills. . Must be able to work all shifts. Able to climb ladders and stairs, work in small restricted areas and lift up to 40 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223331Category: Quality AssurancePercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/25/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-AU1

Why Guitar Center Here’s just some of the rewards: For our employees who are musicians we offer the unique opportunity of gig leavetake time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision,401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options. POSITION OVERVIEW: Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission. As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work. A few special characteristics that make our Repair Technicians successful: Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues. Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales, and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques. Training: Able to effectively train learners and communicate info and techniques so that they are retained. As our Repair Technician, you will: Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedRequirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Requistion Number:25030When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation’s premiere propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States.PostingYour New Career, Delivered!Hot Job, Cool Benefits!AmeriGas, the nation’s largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you!Are you looking for an exciting career with a nationally known company and industry leader AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician.CompensationThe hourly rate starts at $30.00, depending on circumstances including an applicant’s skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company’s good faith and reasonable estimate of the range of compensation for this position as of the time of posting.BenefitsHome every day$5,000 sign-on bonus17 days of PTO and 7 Paid HolidaysOngoing safety incentivesCareer advancement opportunities and annual performance reviewsUniforms provided$2,500 employee referral programHealth, Vision, Dental, HSA401k with company matchVeteran Friendly!ResponsibilitiesAs a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customersInstall new propane tanks/systems for commercial and residential customersOn an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propanePerform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and ProceduresConsistent use of required Personal Protective EquipmentDepending on fluctuating needs, work 8 to 12-hour shiftsRequirementsAll Service Technicians must possess a valid Massachusetts Gas Fitter LicenseAll Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsementsAcceptable driving recordSatisfactory completion of a DOT physical, drug test and background checkWillingness to work outdoors in all weather conditionsAbility to lift up to 70lbsPrevious Experience Can Include But Is Not RequiredHVACPlumbingMaintenance or Mechanical ExperienceAmeriGas is an Equal Opportunity and Affirmative Action Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices.AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.25 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#AB1128#

Be part of the future!We are a team dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to making a difference.What do we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd more!What you will do: This position will be responsible for the installation of complex integrated security systems to include the wiring, equipment and programming of access control systems, CCTV, digital recorders, network recorders, and intercom systems for clients.How you will do it:Capable of installing cabling, field equipment & control equipment enclosures in customer locations according to the national electric code, company and customer guidelines.Can use electronic test equipment to troubleshoot complicated problems during installation.Reads and interprets blueprints, diagrams, submittals, specifications, software/systems programs, schematics and operational product manuals.Readjust equipment, repair or replace inoperative equipment and test for operationPerforms system checks for proper operation.Knowledge of computer programs including word processing, spreadsheets and databases; CCTV and access control systems; media storage.Ability to plan, organize and prioritize work paying close attention to details.Ability to communicate effectively, orally and in writing, while establishing and maintaining cooperative working relationships.Ability to analyze information.Can work unsupervised to complete installation jobs and is self-motivated to complete jobs.Completes and submits all necessary paperwork related to job assignments.Capable of using hand and power tools to properly mount and secure equipmentFeed cables through access holes, roof spaces, and cavity walls to reach fixture outlets; then position and terminate cables, wires and strappingDrill holes for wiring in wall studs, joists, ceilings, and floors.Conduct End- User training.Ability to isolate trouble to a customer network, where applicable.What we look for: RequiredA Class D license in Massachusetts, also known as a Systems Technician license, is required to install and maintain electrical systems in homes and businesses, such as security alarms and fire warning devices. To obtain a Class D license, applicants must meet the following requirements:Complete 300 hours of Board-approved educationComplete a 15-hour Code-Update ClassGain 4,000 hours of work experience over a minimum of two years under the supervision of a licensed Systems Technician or Journeyman ElectricianPass all licensure examinations with a score of at least 70%Applicants must also submit the following documentation:A certificate of completion for each learning objectiveA letter of accreditation from the institution that provided the instructionA description of coursework that includes the National Electrical Code, International Electrical Code, and any relevant regulations or codesHigh school diploma, GED, or equivalent.Significant background (3+ year experience) in Digital & Analog Camera Systems.Significant background (3+ year experience) in Access Control Systems.Understanding of the function and design of Alarm Systems.Experience with IP addressable security devices (2+ years).Must be computer literate to include advanced TCP/IP networking skills.Must be able to operate a company truck with an acceptable driving record.Is proficient with all aspects and operation of ADT A.I. core card access, CCTV systems.PreferredAssociate degree or 2-year technical school program graduate preferred.An industry-recognized apprentice training program may be substituted for the formal education requirement.Specialized training/ certification in the following categories:Access Control (at least 3 certifications from the following)ProwatchC-Cure 800 or C-Cure 9000Casi- Facility Commander or Picture Perfect or Secure PerfectCCTV- Analog (at least 1 certification from the following)BoschPelcoAmerican DynamicsCiscoCCTV- IP (at least 1 certification from the following)GenetecIndigo VisionVisitor Management (experience in any of the following preferred)Honeywell Lobby WorksStopwareAccess SentryAdditional experience a plus: MCSE, CCNA, Surveillance Systems, Intrusion Detection Systems, Perimeter Intrusion Detection Systems and Security Gate Operators.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment