What you will doThe Test Engineer will “manage” a test throughout the process from test design and planning through execution to completion including preliminary analysis of data results. This individual possesses a working knowledge of HVAC/R equipment and its application. This individual has experience with component or system testing, test procedure development, and mechanical fluid or airflow system design, troubleshooting or operation. They are required to singularly manage the testing process for individual test subjects in order to successfully and efficiently complete testing within the product area. They will conceive, develop, and evaluate plans for solving complex testing challenges. An advanced level team contributor with strong technical expertise in HVAC who will assist in training of personnel in the laboratory as well as defining and supporting the implementation of operational improvement of testing.How you will do it· Provide technical communications for test engineering to project customer(s).· Plan and execute tests of chillers and components. This may include:o Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.o Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.o Meet with product engineering, product management, product technical support or equivalent groups to agree upon and issue test plans.o Work within the test engineering team to schedule tests and required resources.o Provide oversight and input to test technicians for set up of data acquisition software configurations.o Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.o Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.· Drive, and participate with creation, of standard procedures, test standards and processes.· Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, or advanced testing services.What we look forBS requiredPreferred combination of two (2) years direct work experience in the following: HVAC/R equipment development, servicing or testing, with a good understanding of HVAC/R systems, concepts, and diagnostics.Desired background in engineering and development testing, with use of a variety of test instrumentation to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Works under minimal supervision. Ownership of assignments, which are carried out collaboratively within lab team and customer groups. Spear-heads process initiatives within department.Familiarity in one or more technical and operational disciplines within HVAC platform development. Experienced in environments ranging from laboratory to manufacturing/testing facilities to field sites.Able to work in fast-paced, schedule driven work environment. Possess the agility/adaptability to quickly move from one task to another when required.Strong people management & communication skills; willing to confront issues in an open, but tactful wayStrong organization and problem-solving experienceAbility to guide or mentor less experienced technical personnel within teamStrong group communication skills, presentation skillsDemonstrated strong financial and analytical skills (desired)Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail

Overview: MARKET LEADING PAY, PLUS BONUSESToyota Certified at Capital Plaza is part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees. The salary range for this position is between$20 - $50 per flag hour.We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needAutomotive Technician or Mechanic ExperienceA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

Seize Your Opportunity! 20% Rent Discount! Career Growth Opportunities + Much More! Pay: $18.00 to $20/hour What you will be doing: The Make-Ready Tech prepares vacant apartments for market ready condition by performing various non-technical functions including, but not limited to: Caulking Drywall repairTouch up paintingTest all locks and key setsAssist in inspection of propertyMaintaining exterior lighting Ground equipment repair and preventative maintenanceMaintain grounds and common areas including picking up trash, sweeping sidewalks and driveways, snow removal etc.Assist the Maintenance Technician(s), Porter, and Housekeeper as necessaryPool maintenance What we’ll expect from you: Valid drivers’ licensealong with good driving record and auto insuranceMust be available, on notice, in event of snow and/or ice and other site emergencies.Be able to work as a team and independentlyHelp others both at the site and other sites Be flexible in transferring to other local regional sites if required.High school diploma or general education degree (GED)Must be willing to submit to a background check and drug screen. The Benefits of Employment: 20% Rent Discount at any Morgan owned property$300 Morgan Essentials – paid quarterlyEmployee referral payment program (as much as $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLongand short term disabilityRetirement Plan - 401(k) Plan with company matchFree access to pool and fitness centerGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. #AC4440Get To Know Us:Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $18.50 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0041#

Summary:Provides structural analysis support on commercial, industrial and military HVAC products, primarily water and air-cooled chillers, including screw compressor and centrifugal compressor-based platforms. The position supports product development, warranty, sales and pressure vessel manufacturing.The individual conducts ASME Boiler and Pressure Vessel Code and other related design calculations and is typically a member of several product development teams. The individual has a good understanding of ASME and International Pressure Vessel Design standards. The individual has a basic understanding of the design, performance and cost of competitive equipment and knows how the JCI equipment is positioned in the market with respect to these attributes. The individual is very skilled in stress analysis techniques. Experience with FEA tools for application to stress analysis is desired.How you will do it:Provide analysis for optimizing designs for chiller components including pressure vessels.Provide analysis support for ASME pressure vessel certification of JCI products.Provide analysis support for Canadian Pressure Vessel Registration (CRN).Develop field modification procedures for pressure vessels.Plan, schedule, coordinate bi-yearly updates to ASME pressure vessel calculations.Review patents and papers to understand the limits of technology and IP in the industry.Provide root-cause analysis relating to warranty/service cases.Adhere to the Company's Business Ethics StandardsRequired:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The individual must have excellent verbal and written communication skills, particularly in the form of design reports and presentations. The ability to work with a team of engineers on fast paced projects and an understanding of the product development process (PDP) is a requirement.Bachelor's Degree in Mechanical Engineering. An MS in an engineering discipline is a plus. A Professional Engineer’s license is also a plus.Minimum of 4 years’ experience in equipment design. Experience with pressure vessels in the HVAC industry is a plus.Good understanding of applicable pressure vessel design and test standards, including those of the American Society of Mechanical Engineers (ASME), The Canadian Standards Organization (CSA), The European Pressure Equipment Directive (PED) and American Petroleum Institute (API).Skilled in the use of analysis software, particularly: ANSYS and Compress.Some travel will be required.Applicants for employment in the US must have work authorization that does not now or in the future require sponsorship of a visa for employment authorization in the United States and with Johnson Controls.#LI-SI1#LI-Onsite

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $18.50 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0041#

What you will doPerforms detailed engineering tasks to include evaluation of engineering alternatives, analysis of data, calculations, CAD drawings, preparation of specifications and reports for the design, development, construction, and commissioning for mechanical, refrigeration, and process (MRP) elements required for HVAC test facilities. This position interacts with engineers, suppliers, and other departments to facilitate project completion. Project work includes MRP systems that simulate precise and extreme environmental conditions including temperature, humidity, precipitation (rain, snow, ice, fog, salt, etc.), air flow, liquid flow, and high-pressure vapor flow.How you will do itDevelop conceptual designs and cost estimates for related MRP project elements during budgeting (Capital Appropriations Request, CAR) and initial project phases.Collect, analyze, and interpret data, develop engineering computer programs (e.g. Excel, EES, LabView) and designs basic process systems, sub-systems, and components.Prepare final designs including drawings, requests for quote (RFQs), bills of material (BOMs), and construction specifications. Responds to contractor and engineering requests-for-information (RFIs).Coordinate with electrical, controls, and other disciplines to facilitate state-of-the-art designs for complete HVAC test facility projects.Create refrigeration and process system designs and develops piping and instrumentation diagrams (P&IDs) for projects that simulate precise and extreme environmental conditions including temperature, humidity, snow, air flow, liquid flow, and high-pressure vapor flow.Review project designs for compliance with applicable national and local codes, engineering principles, industry best practices, company standards and related specifications.Plan and conduct on-site startup, troubleshooting, adjusting, testing and commissioning of MRP systems for all test facility projects.Facilitate all capital planning & executionOperate in compliance with JCI safety, quality, confidentiality, and ethics policies, including completion of recurring on-line training modules with self-certificationPerform other duties as assignedWhat we look forBachelor of Science Degree Mechanical Engineering from ABET accredited university; master’s degree or PE registration preferred.Minimum of 8 years’ experience with mechanical engineering design in the HVAC industry; or 6 years work experience after the completion of a MSME degree or PE license. Working knowledge of applicable industry codes and standards including ASHRAE, AHRI, UL, AMCA, ASME, ANSI, SMACNA, UBC (ICC) and others.Proficiency in Microsoft Windows operating environment, including e-mail and Microsoft Office software; and AutoCAD or equivalent engineering document preparation.Ability to operate independently on detailed individual tasks with a high level of accuracyAbility to multitask and work with various stakeholders as neededStrong organizational and record keeping skillsStrong verbal and written communication skills using EnglishEffective and professional interpersonal skills to contribute as part of internal customer service team#LI-SI1#LI-Onsite

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $18.50 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0041#

Be part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we will give you the space and opportunities to grow and succeed. We are committed to making a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Under direct supervision of the Area Resource Manager (Customer Service Dispatch Supervisor), receives and schedules customer calls for service. Manages schedule of assigned technicians and mechanics. Ensures schedule allows for timely completion of preventative maintenance and aligns with monthly forecasting goals. Debriefs activities of assignedtechnicians/mechanicsdaily, coordinating withtechnicians/mechanicsto resolve concerns quickly. Assesses job completion and collaborates with Customer Billing Coordinators and Customer Support Coordinators to progress completed jobs through the appropriate business process.How you will do it:Receives customer requests for unscheduled or scheduled service.Coordinates labor scheduling to align technician to the appropriate customer and service need.Communicates the action plan and services to be provided directly to the customer.Ensures work has been performed to the customer’s expectations and performs follow-up with the customer, as needed.Answers any customer inquiries and resolves or escalates customer issues, as appropriate.Debrief activities dailyEnsures Technicians are provided daily schedules. Maintains consistent communication with assigned Technicians. Follows up on activities to ensure completion in an established timeframe.Ensures that all customer account information required to support call management activities and scheduling of tasks are kept up to date in NxGen.Scheduled Service Visits – on timeParts ordering/PO creation supportStart-up supportCustomer PO confirmationWIP ManagementAuto SR quotesReconcile exceptions (SIR and AP)Attend weekly planning/scheduling meetingService + rewardsAssist with monitoring of time and expense reporting submissionReview and correct unassociated time for timesheets for techniciansOther duties and administrative activities as assigned.What we look for:RequiredHigh school diploma or equivalent required, plus two to five years of service industry experience managing service operations and/or service scheduling.Must demonstrate the ability to perform work independently and demonstrate solid organizational and attention to detail skills.Must have strong interpersonal skills to effectively communicate with both internal and external clients. Must have the ability to simultaneously handle a large and diverse number of projects, tasks and issues with tact, cooperation, and persistence.Able to prioritize work activities based upon financial impact to desired business goals.Able to influence diverse teams to accomplish tasks/goals.PreferredAssociates degree preferredExperience and/or basic project accounting or costing principals is desiredHIRING HOURLY RANGE: $24.90- 37.40 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary Paid vacation/holidays/sick time - 15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities with outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyJCI Employee discount programs (The Loop by Perk Spot)What you will do:The HVAC Truck Based Service Manager is responsible for Service customer account leadership, including Labor and Material growth and execution of the Service business, for the team’s customer base. Drives profitability and productivity of the team. Manages customer relationship development and satisfaction. Responsible for employee development and retention and for safety program compliance.How you will do it:Sets and monitors goals for customer account gross margin delivery and profitability, including Planned Services Agreements and Labor & Materials (L&M) work. Drives L&M growth through Technicians and Team Leads. Leads the execution efforts of assigned Service business to include warranty-related customer issues.Responsible for procuring and mainlining fleet and tools inventory.Ensures consistency of delivery systems through supervision and audits of Technicians, Customer Service Agent and others who are part of the service delivery process.Reviews and approves all L&M quotations.Responsible for budgeting, forecasting, accounts payables/receivables.Responsible for maintaining appropriate staffing levels to accommodate existing and new business needs, hiring, training and transitioning new employees as well as the day-to-day performance of the service team, conducts formal performance reviews, and all related issues.Responsible for safety performance and program compliance.What we look for:RequiredTechnical school training or equivalent experience in the HVAC or building controls industry.Three or more years of management experience in a similar service deliverable environment.Strong ability to prioritize work activities for the team, scheduling, and lead a diverse team.Strong interpersonal, customer service, negotiating skills.Demonstrated competence in writing and verbal communication skills.Basic financial accounting experience.Demonstrated proficiency in MS office products and basic Windows environment.PreferredDiploma in Electronic or Mechanical Systems.Two years prior experience in the HVAC or building controls industry.Five plus years in a service management role directing a similar service deliverable team

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do:Performs assigned system commissioning using Johnson Controls configuration and commissioning tools. Troubleshoots and resolves basic HVAC mechanical, electrical, and controls problems. Responds to basic warranty calls. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service.This role will service Bethesda MD and DCHow you will do it:Loads system-level controller software.Performs basic commissioning and system diagnostics from system-level controllers to end devices (i.e. sensors, actuators, etc.) and completes all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look for:Required2-4 years of industry experience or 1 year experience in servicing electronic and/or mechanical systems in the HVAC industry.Generally required knowledge includes HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniques.Effective interpersonal skills to properly represent Johnson Controls to customers and other outside contacts in an ethical and professional manner.Ability to explain technical information to technical and non-technical people. Leadership skills to support the activities of Mechanics working on non-complex, non-critical Building Automation equipment on a job site.PC experience required and the ability to program HVAC related software.Metasys and Tridium experience is a plus.Occasionally required to work evenings and weekendsHourly Rate :$24.90 -$37.00 per hour depending on experienJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.