Description The GIS / Cartographic Analyst - Journeyman will work within a government/contractor team environment providing Digital Nautical Chart and Electronic Nautical Chart Conversion, Production and Review as well as provide support to existing and developing mission areas. Future needs and capabilities, as well as developmental assignments, are included.Cartographic analyst duties includes, but is not limited to the following:Digital Nautical Chart and or Electronic Nautical Chart Conversion production by performing Cartographic and GIS analyst functionsExtracting features from a variety of sources including but not necessarily limited to rasterized nautical charts, digital hydrographic survey data and ortho-rectified imageryUpdating source and source catalogs and informationData Conversion/migrationScript writing / generation to improve efficiency of the production processMinimum Required Qualifications:Requires HS and 3+ years of prior relevant experienceExperience in geography, cartography and Geographic Information Systems (GIS) which includes skill in ArcGIS applicationsExperience in creating shapefiles, geo-databases, and featuresKnowledge of digital cartography, image processing, geographical information systems (GIS), geospatial production techniques and NGA digital data formatsAbility to analyze imagery and non-imagery source information for application to NGA hydrographic products and databasesPreferred Qualifications: BA degree and 2 – 4 years of prior relevant experience or Masters with less than 2 years of prior relevant experience.Security Clearance RequirementMust have an active TS/SCI clearance required, with willingness to obtain a polygraph upon request"Eligible External Referral"MACSSOriginal Posting Date:2024-04-05While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos Gibbs & Cox, currently has an opening for a Mid-Level Marine Mechanical Engineer to support the USCG Ship Design Team (CG-459). The mission of CG-459 is to provide complete lifecycle management of floating assets from concept design through delivery and sea trials. This position provides you the opportunity to contribute to the design and construction of new USCG acquisitions, including small boats, cutters, and icebreakers, directly alongside Coast Guard personnel. This position focuses on the development and review of Propulsion system designs for USCG assets.Prefer candidates to be local to Washington, DC to enable onsite work at USCG Headquarters, 2 to 3 days per week. However, fully remote candidates will be considered.Primary ResponsibilitiesProvide marine engineering support for both conventional and electric propulsion systems.Provide engineering and technical support for review of shipyard engineering documentation packages.Perform feasibility studies, trade-off analyses, and indicative propulsion designs for potential future vessel acquisition programs.Perform calculations applying propulsion system design principles, techniques, procedures and criteria.Interface directly with USCG and shipyard personnel.Basic QualificationsU.S. Citizenship and must have an active secret clearance or be eligible to be granted one.BS or MS in Technical, Engineering, or Marine degree from ABET-accredited institution, related to field of work.Minimum of 2 years’ documented experience relating to the design of marine systems.Excellent verbal and written communication skills.Preferred QualificationsActive Secret Security clearance.Familiarity with USCG, ABS and/or commercial ship design rules and regulations.Documented experience relating to the design of marine propulsion systems.Proficiency in AutoCAD or other CAD type software.Original Posting Date:2024-07-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $65,000.00 - $117,500.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

Description Leidos Gibbs & Cox, currently has an opening for a Senior-Level Marine Mechanical Engineer to support the USCG Ship Design Team (CG-459). The mission of CG-459 is to provide complete lifecycle management of floating assets from concept design through delivery and sea trials. This position provides you the opportunity to contribute to the design and construction of new USCG acquisitions, including small boats, cutters, and icebreakers, directly alongside Coast Guard personnel. This position focuses on the development and review of Propulsion system designs for USCG assets.Prefer candidates to be local to Washington, DC to enable onsite work at USCG Headquarters, 2 to 3 days per week. However, fully remote candidates will be considered.Primary ResponsibilitiesProvide marine engineering support for both conventional and electric propulsion systems.Provide engineering and technical support for review of shipyard engineering documentation packages.Perform feasibility studies, trade-off analyses, and indicative propulsion designs for potential future vessel acquisition programs.Perform calculations applying propulsion system design principles, techniques, procedures and criteria.Interface directly with USCG and shipyard personnel.Basic QualificationsU.S. Citizenship and must have an active secret clearance or be eligible to be granted one.BS or MS in Technical, Engineering, or Marine degree from ABET-accredited institution, related to field of work.Minimum of 5 years’ documented experience relating to the design of marine systems.Excellent verbal and written communication skills.Preferred QualificationsActive Secret Security clearance.Familiarity with USCG, ABS and/or commercial ship design rules and regulations.Documented experience relating to the design of marine propulsion systems.Proficiency in AutoCAD or other CAD type software.Original Posting Date:2024-07-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

Description Unleash Your PotentialAt Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!We are in search of a Senior Network Installation Technician at the customer site at Fort Meade, MD and will require travel.Our Opportunity:The Defense Enclave Services contract will unify the DOD Fourth Estate Defense Agencies and Field Activities’ common use information technology systems, personnel, functions and program elements under the direction of DISA’s Fourth Estate Network Optimization program office. This technician will support a large federal agency’s Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment. This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards.Clearance Requirement:•Must hold an active Top Secret security clearance and be able to obtain a TS/SCI. (US Citizenship required)Key Responsibilities:•Lead network survey, design and installations under direction of the government.•Conduct Site Surveys of customer premise networks in CONUS and OCONUS locations.•Create detailed Site Survey reports detailing a site’s current infrastructure, NIST and TEMPEST compliance, along with design recommendations.•Configure, install, test, certify, and troubleshoot network infrastructure cabling.•Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards.•Build and install equipment racks.•Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms.•Test and troubleshoot network infrastructure issues on SIPR and NIPR networks.•Create accurate reports and documentation to design/certify network infrastructure.•Track, manage, and ensure project tasks are completed in a timely manner.•Develop Bills of Material (BOM) for network plant design requirements.•Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)•Investigate physical faults in the network.•Report network infrastructure deployment status to key stakeholders.•Have flexible working hours to be available to support off hour work, when needed.Must have’s:•Bachelor’s degree and 4 years of relevant experience; additional years of experience may be substituted in lieu of a degree.•Understanding of ANSI/TIA-568 and 569 standards.•Requirements of Protective Distribution Systems (PDS) for Classified Systems as directed by Security and/or the Certified Tempest Technical Authority (CTTA).•Knowledge of National Security Telecommunication & Information Systems Security Instruction (NTISSI) 7003.•Knowledge of DISA network topologies and standards.•Topology and rack elevations using Visio.•Experience with various OTDR, cable testers, and network sniffers to develop reports for infrastructure certification documentation.Nice to have’s:•BICSI certification.•Sec+ certification.DISADESExternal Referral EligibleOriginal Posting Date:2024-07-10While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Description Looking for a rewarding career challenge Unleash your potentialat Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. With Leidos, you will enjoy competitive benefits such as Paid Time Off, Flexible Schedules, Discounted Stock Purchase Plans, Education and Training Support, Parental Paid Leave, and more!If this sounds like an environment where you can thrive, keep reading!Are you ready to join an incredible team This contract is critical to the government and allows team members to work independently and in a team environment to achieve success. If you are passionate, motivated, and want to be part of an organization that values your contributions, we want to hear from you. Apply today!Your greatest work is ahead!The Mission The Leidos National Security Sector uses a wide range of capabilities to support our customers’ mission to defend against evolving threats around the world. Our team’s focus is ensuring our intelligence customers have the right tools, technologies, and tactics to keep pace with an ever-evolving security landscape and succeed in their pursuit to protect people and critical assets.The Leidos National Security Sector is seeking a Journeyman Communications Specialist to support an Intelligence Community (IC) program in McLean, VA. An Active TS/SCI with polygraph security clearance is required to be considered for this position. The candidate will support Government staff in the following:Technical Editing - Supports the ODNI by leading communication support such as: the development, preparation, production, coordination, and editing of a range of products that may include finished intelligence products, strategy and planning documents, talking points, and speechesPrepares assignments based on input from subject matter expertsMentors and trains junior staffUtilizes tools such as Adobe Creative Cloud suite to create compelling contentUtilizes request management tools such as NarQuest to provide swift, high quality customer support for communications requestsProvides support by researching, proofreading, editing, creating, writing, processing, revising, formatting, providing quality checks, and coordinating the composition of products for hardcopy and electronic publication, as well as dissemination on multiple platforms. Products will be in a variety of formats, styles, and configurations, including written and web-based productsEnsures documentation and editing support includes checks for accuracy and consistency in organization, style, readability, and accessibility based on the mediumDrafts and edits a variety of communication materials and products, including but not limited to talking points, speeches, quotes, remarks, leadership communications, marketing copy, newsletter content, website content, and other communications productsServes as the primary author on fact sheets, pamphlets, website content, articles, email messaging, and other communications products, as neededInitiates, plans, executes, and reports on tasks independently, as identifiedPrepares and edits speeches or scripts for senior executives for live or recorded delivery, testimony, and statements for Congressional RecordRewrites submissions as necessary to organize, balance, and apply a consistent sense of style, grammar, and flow to these written materialsConveys complex information in a clear and simple mannerEnsures all products are consistent with tradecraft and publication standardsAdvises and coaches leadership on the presentation and delivery of speechesTools include the MS Office suite, collaboration tools such as MS Teams and Sharepoint, as well as Adobe Creative Suite.Basic Qualifications:BA degree and 4 – 8 years of prior relevant experience or Masters with 2 – 6 years of prior relevant experience. Additional experience may be exchanged for degree requirements.TS/SCI with Polygraph level clearance is requiredOriginal Posting Date:2024-05-08While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $61,750.00 - $111,625.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for a rewarding career challenge Unleash your potentialat Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. With Leidos, you will enjoy competitive benefits such as Paid Time Off, Flexible Schedules, Discounted Stock Purchase Plans, Education and Training Support, Parental Paid Leave, and more!If this sounds like an environment where you can thrive, keep reading!Are you ready to join an incredible team This contract is critical to the government and allows team members to work independently and in a team environment to achieve success. If you are passionate, motivated, and want to be part of an organization that values your contributions, we want to hear from you. Apply today!Your greatest work is ahead!The MissionThe Leidos National Security Sector uses a wide range of capabilities to support our customers’ mission to defend against evolving threats around the world. Our team’s focus is ensuring our intelligence customers have the right tools, technologies, and tactics to keep pace with an ever-evolving security landscape and succeed in their pursuit to protect people and critical assets.The Leidos National Security Sector is seeking a Graphics Designer to support an Intelligence Community (IC) program in McLean, VA. An Active TS/SCI with polygraph security clearance is required to be considered for this position. The candidate will support Government staff in the following:Develops graphics, digital media, cartography, and other multimedia productsUtilizes request management tools to provide swift, high quality customer support for communication requestsCoordinates with UI/UX designer in Knowledge Management, to ensure graphics products provide an engaging and user-friendly experienceCreates graphic designs for a variety of written and digital productsDevelops design concepts and implements designs for new web pages, mobile applications, newsletters, ads, infographics, banners, illustrations, logos, and other types of digital content that will be presented onlineEnsures products conform to all production standards, copywrite laws, accessibility compliance requirements, public release clearancesConducts technical quality checksManages an approved concept and build in HTML/CSS so it complies with responsive design principlesProvides Cartography support, as needed, to design thematic and reference mapsBasic Qualifications:BA degree and 4 – 8 years of prior relevant experience or Masters with 2 – 6 years of prior relevant experience.TS/SCI with Polygraph level clearance requiredExperience with the following:Leading the development of graphics, digital media, cartography, and other multimedia productsMentoring and trains junior staffCreating graphics products that provide an engaging and user friendly experienceCreating graphic designs for a variety of written and digital productsDeveloping design concepts and implements designs for new web pages, mobile applications, newsletters, ads, infographics, banners, illustrations, logos, and other types of digital content presented onlineEnsuring products conform to all production standards, copywrite laws, accessibility compliance requirements, public release clearancesConducting technical quality checksOriginal Posting Date:2024-03-20While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $61,750.00 - $111,625.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos is hiring a Network Engineer to work with a Government-Contractor team providing support to a near real-time, geospatially accurate Common Operating Picture (COP) toolset and associated to support mission requirements. This COP enables sharing and reuse of geospatial intelligence across multiple function areas in support of military operations.The Network Engineer will:Analyze potential networking configuration issues, performance issues, and bottleneck; or solve other problems with overall engineering of the network.Perform network engineering functions including conceptualization, design, implementation, and optimization.Assess evolving user needs, translating those needs into network changes through network reconfiguration, hardware and software acquisitions, installation and test.In coordination with security and information assurance procedures, implement safeguard measures to prevent damage and unauthorized modification and disclosure.Primary ResponsibilitiesAssists in the development and maintenance of network communications.Uses knowledge of LAN/WAN systems to help design and install internal and external networks.Tests and evaluates network systems to eliminate problems and make improvements.Responsible for local area, wide area, and virtual private network (VPN) systems, including planning, designing, monitoring, evaluating, and selecting operating systems and protocol suites.Maintains technical expertise in all areas of networks and computer hardware and software interconnection and interfacing, such as routers, multiplexers, firewalls, hubs, bridges, gateways, etc.Resolves interoperability problems to obtain operations across all platforms and may include networking devices, e-mail, files transfer, multimedia, telecommunications, hardware and software.Provides batch monitoring, back-up and restoration.Prepares or ensures that appropriate network documentation exists, including operational instructions.Configures systems to user environments.Supports acquisition of hardware and software.Support may also include installing new workstations and/or servers, adding and removing individuals from the list of authorized users, archiving files, overseeing password protection and other security measures and monitoring usage of shared resources.Basic Qualifications Education: Bachelor's Degree and 4 years of experience OR Master's Degree and 2 years of experience. 4 years work experience, OR Associate's Degree plus 2 years of experience, may be substituted for a Bachelor's Degree.Degree in computer science, Information systems, Engineering, business or related scientific or technical discipline.Two years of related DoD, Military, or US Government related experience - Excellent collaboration, communication, and interpersonal skills.An active secret level security clearance with the ability to obtain a TS/SCI clearance is required for this role.Preferred QualificationsAble to track, analyze, and communicate emerging network software and hardware technology and protocols to a non-technical audience.Security +, CCNA or other related technical certifications.Original Posting Date:2024-07-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos is hiring a GIS Developer to work with a Government-Contractor team providing a near real-time, geospatially accurate Common Operating Picture (COP) to support mission requirements. This COP enables sharing and reuse of geospatial intelligence across multiple function areas in support of military operations. The GIS Developer will support systems responsible for processing, exploitation, and dissemination of multi-discipline and multi-sensor intelligence, mapping, and weather information to weapon systemplatforms and Warfighters.Primary ResponsibilitiesUnderstanding of Geospatial Information Systems (GIS) software as well as software engineering and programming for GIS systems in large computer and minicomputer and microprocessor systems supporting broad base of applications.Develops and maintains GIS software programs, performs software coding and writes software documentation to design specifications.Designs and implements data conversion procedures and performs software and database quality control.Ensures the stability, integrity, and efficient operation of systems.Performs detailed software design and detailed database conversion design and is directly involved in the coding and implementation of the more complex and strategic portions of application software and database conversion projects.Confirms that GIS data remains at established quality standards.Oversees quality assurance testing for GIS software programs.Basic QualificationsEducation: Bachelor's Degree (Geographic Information Science, computer science, cartographic science, geology, social science, environmental science or related technical field) and 4 years of experience OR Master's Degree and 2 years of experience. 4 years work experience, OR Associate's Degree plus 2 years of experience, may be substituted for a Bachelor's Degree.Experience with geospatial programing, including ArcGIS; proficient in ESRI product languages, programming languages, Internet markup languages. Two years of experience in geospatial software design, development, integration, and testing for DoD or Intelligence Community (IC) systems. Experience with ArcGIS, Python, as well as Open Geospatial Standards. - Excellent research, collaboration, communication, and interpersonal skills.An active secret level security clearance with the ability to obtain a TS/SCI clearance is required for this role.Preferred QualificationsCertified GIS Professional (GISP) certification, National System for Geospatial-Intelligence (NSG) GEOINT Professional certification, Army GEOINT/Imagery Analyst Leadership Course, or Army Foundry GEOINT training or comparable certification. Experience on the operation of National and Tactical GEOINT systems and associated tactics, techniques, and procedures (TTPs).Original Posting Date:2024-07-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos is hiring a Geospatial Analyst to work with a Government-Contractor team providing a near real- time, geospatially accurate Common Operating Picture (COP) to support mission requirements. This COP enables sharing and reuse of geospatial intelligence across multiple function areas in support of military operations. The Geospatial Analyst will support systems responsible for processing, exploitation, and dissemination of multi-discipline and multi-sensor intelligence, mapping, and weather information toweapon system platforms and Warfighters.Primary ResponsibilitiesAnalyze geographical data, work collaboratively with other team members, and understand and communicate GIS theories, applications, technologies, and concepts.Utilize GIS techniques and tools to provide a better understanding of certain variables in a given geographic location.Extract data from GIS software and use varying analysis methods to arrive at results.Write reports on geospatial analysis findings and recommend appropriate reactionary strategies in response to GIS analysis.Present relevant information in an understandable way in meetings and presentations.Provide maps and data sets to supplement analysis.Provide database development support in creating cartographic and digital data products.Perform data conversion migration, and translation activities utilizing advanced processing techniques.Design and implement efficient production tools and coordinate workflow with project team.Perform finishing of remote sensing data, producing and maintaining cartographic databases, updating cartographic data from intelligence databases and producing mission specific data sets.Research and develop geospatial products for project use.Basic Qualifications Education: Bachelor's Degree (Geographic Information Science, computer science, cartographic science, geology, social science, environmental science or related technical field) and 4 years of experience OR Master's Degree and 2 years of experience. 4 years work experience, OR Associate's Degree plus 2 years of experience, may be substituted for a Bachelor's Degree - Excellent research, collaboration, communication, and interpersonal skills An active secret level security clearance with the ability to obtain a TS/SCI clearance is required for this role.Preferred QualificationsCertified GIS Professional (GISP) certification, National System for Geospatial-Intelligence (NSG) GEOINT Professional certification, Army GEOINT/Imagery Analyst Leadership Course, or Army Foundry GEOINT training or comparable certification.Experience on the operation of National and Tactical GEOINT systems and associated tactics, techniques, and procedures (TTPs). Two years as a GIS or Geospatial analyst in the IC or DoD, or two years’ experience providing subject matter expertise to DoD GEOINT programs/projects.Original Posting Date:2024-07-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $61,750.00 - $111,625.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!Leidos currently has an opening for an Electro-Mechanical Technician to work in our Ladson, SC facility. As a member of the Leidos Security Enterprise Solutions (SES) team, you will be joining a diverse and dedicated group who are excited about producing industry leading screening technology.Our new Ladson, SC facility will produce a comprehensive suite of fully automated and integrated products for aviation, shipping ports, border crossings, and critical infrastructure customers.These systems provide threat detection by screening baggage, cargo, and people at checkpoints around the world.The Electro-Mechanical Technician will be responsible for the rapid manufacturing of sub-assemblies and finished systems.The day to day could cover a variety of assembly types that include cables, harnesses, panels, mechanical assemblies, or large system builds.In addition to assembly, this role will be expected to participate in system troubleshooting and diagnostics.They will often interact with test technicians and engineering to resolve technical issues.In this role the technician will need to comprehend assembly documentation, safely and properly utilize required tooling, operate material handling equipment, record system information, adhere to company policies, and interact positively with other team members.Some finished system could be large and require someone who can physically maneuver around the product. The ideal candidate will be a positive, energetic, self-motivating individual who is ready to learn and contribute to the mission.Primary Responsibilities:Troubleshoot technical issues with varying level of complexityHave a working knowledge of electrical theory and signal processingRead and interpret work instructions, drawings, schematics, and other production related documentationSolder wires, PCBA’s, and components Utilize a combination of basic hand tools and power toolsUtilize measuring tools such as multi-meters, continuity checker, Oscilloscopes, etc.Provide assembly feedback and suggested changes or improvementsComplete build records and documentation as requiredConducts quality checks on own work and may execute buddy checks on others workMaintain workspace cleanliness and organization utilizing 5S methodologiesFollow manufacturing guidelines and proceduresAdhere to company regulatory and compliance policiesParticipate in cross-training activitiesRequired Qualifications: 2+ years’ experience in manufacturing or research and development (R&D)High school diploma or equivalentMust have the ability to obtain a Public Trust clearance (US citizenship required).ESD AwarenessAverage computer skills used for daily employee taskCompetencies:Attention to detail and quality conscious Drive and ambition to execute and complete work in timely mannerPersonal sense of integrity, trust, and respectStrong interpersonal skills used to set and maintain positive culturePreferred Qualifications:Current or expired certification in any of the following: IPC 620, 610, 7711, 7721, or J-standardThe Leidos Security Enterprise Solutions (SES) team has developed a suite of integrated solutions for aviation, ports, borders, and critical infrastructure customers around the world. We provide automated threat detection for weapons, narcotics, explosives, contraband, and undeclared goods, as well as nuclear and radioactive materials, by leveraging industry leading screening technologies, AI/ML capabilities and advanced biometric tools. We have more than 24,000 products deployed across 120 countries, including best-in-class security checkpoint and inspection systems for people, checked baggage and more.Check out the links below to learn more about Security Enterprise Solutions (SES)https://careers.leidos.com/pages/security-enterprise-solutionshttps://www.leidos.com/markets/aviation/security-detectionOriginal Posting Date:2024-07-11While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for an opportunity to make an impact The Leidos National Security Sector combines technology-enabled services and mission software capabilities in the areas of cyber, logistics, security operations, and decision analytics to support our defense and intel customers’ mission to defend against evolving threats around the world. Our team’s focus is to ensure our customers have the right tools, technologies, and tactics to keep pace with an ever-evolving security landscape and succeed in their pursuit to protect people and critical assets.Your greatest work is ahead!The National Security Sector at Leidos is hiring for a Senior Mechanical Engineer to be based onsite with our Intel Community customer. This position will be responsible for designing, cost estimating, scheduling, engineering, coordination, contracting, installation oversite, inspection, and acceptance of mechanical systems/services, which include HVAC, HVAC controls, chillers, boiler, water distribution, ductwork, plumbing, and fire protection systems associated with Intel customer facilities and critical infrastructure. You will have demonstrated mechanical engineering experience, well-developed professional skills and a proven track record of delivering results. Your ability to work collaboratively with a team of people from across multiple organizations and the company will be crucial for success. This position is contingent upon contract award.What you’ll be doing:Perform HVAC, HVAC controls, chillers, boiler, water distribution, ductwork, plumbing, and fire protection systems design for FAA Terminal facilities (Air Traffic Control Tower, Terminal Radar Approach Control facilities, etc.).Perform on-site surveys to develop “to-scale” designs and detailed reports.Generate sketches/drawings showing relation of proposed installation in existing or new facilities with exact specifications and dimensions.Participate in construction inspections and final inspections.Confer with engineering staff and other personnel to identify and resolve problems with the design or implementation.Coordinate design components with a multi-disciplinary as required for site-specific modifications and new construction.Prepare AutoCAD construction drawings and prepare site-specific specifications and contract documents and independent cost estimates.Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans).Assist in generating and coordinating the Integrated Risk Management Checklists (IRMC), communication plans, project risk register, to meet Operational Risk Management (ORM) requirements.Coordinate and complete Work Permits required for potential impact to lead and asbestos that may be encountered during construction.Participate in meetings inclusive of the pre-construction meeting and on-site construction meetings with stakeholders to coordinate with other ongoing construction and projects.Plan, schedule, and coordinate construction project activities to meet milestones and deadlines, working directly with stakeholders and contractors.Manage and participate in on-site cutovers, testing and restoration of facilities.Prepare, maintain, and provide periodic updates of project to team, management, and stakeholders.Manage multiple projects towards successful on-time completion.Review contractor design and construction submittals.Review project deliverables and provide verbal and written communication to the findings.Provide and coordinate timely response for project RFIs (Requests for Information) and project related submittals.Monitor progress of projects and stakeholder needs.Work independently to evaluate, select and apply standard engineering techniques and procedures, using judgement in making adaptations and modifications to Engineering designs.What does Leidos need from me Must possess an active Top Secret/SCI (TS/SCI) with Polygraph.Bachelors degree in Mechanical Engineering and 12 plus years of prior relevant experience or a Masters degree in Mechanical Engineering with 10 plus years of prior relevant experience. Additional years of experience may be considered in lieu of degree.Must be a Registered Professional Engineer in good standings in the United States.At least eight years of experience with mechanical systems design including HVAC and plumbing systems with commercial, industrial and/or government facilitiesMust have current and relevant knowledge of building and energy codes in order to be able to perform heating and cooling load calculations, ductwork sizing and layout, piping calculations and distribution, sections/elevations, and equipment sizing and selection.Working knowledge of Microsoft 365 (Word, Excel, PowerPoint), Engineering Scheduling tools and applications, and be able to use the Internet as a gathering and communicating tool.Proficiency with AutoCAD.Ability to accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stake holders, peers and management levels.Ability to maintain an electronic project folder (as required) related to site preparation and equipment installation problems.Ability to provide technical assistance and recommendations regarding the closure of construction related punch-list items.Ability to develop project plans, establish project schedules, project estimates, and provide organized documentation.Ability to effectively communicate in written and verbal form in-person or virtual and work independently in a large Engineering Organization and in a fast-paced team environment.Ability to discuss project related items with stakeholders, contractors and code related Authorities Having Jurisdiction (AHJ).Basic knowledge of multiple disciplines regarding their general requirements for typical standard types of projects.Ability to conduct efficient, organized data gathering, and data analysis.Favorable if you have:SCADA Systems familiarity.PMP Certification.Original Posting Date:2024-02-06While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Printed Circuit Board (PCB) FabricatorAre you looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like the kind of environment where you can thrive, keep reading!Our Mission Solutions Business Area (MSBU) at Leidos is seeking a Printed Circuit Board (PCB) Fabricator to support a government contract in the National Capital Region (NCR). The ideal candidate will be able to design, manufacture, and interface with commercial vendors for the production of printed circuit boards based on industry standards. The candidate must have experience with PCB manufacturing, PCB assembly, and the proper handling and management of associated materials (chemicals, gases, etc.).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!In this role you will:Work as part of a team for the production of PCB designs and assemblies, Fabricate PCBs to support project tasks and objectives, Assist with the design and development of PCB engineering solutions in support of unique and complex customer requirements,Work as part of a team to maintain a safe operating environment in the shop and work closely with the safety officer to adhere to OSHA and EPA regulations,Assist with skills development for associated officer training and proper use of equipment,Work as part of a team to communicate and interface with internal customer stakeholders to gather end product requirements for development,Review E-CAD designs for potential manufacturing defects/challenges and recommend modifications to ensure smooth delivery process,Maintain fabrication machines, software, and supplies,Communicate with vendors to assist PCB fabrication and assembly needs in support of customer requirements and timelines,Create and maintain documentation for PCB fabrication equipment, processes, and techniques,CONUS and OCONUS travel may be required 5% of the time.Clearance Required:Active TS/SCI with polygraph is required, or active TS/SCI with willingness to upgrade to polygraph.Required Experience, Skills, and Education:Bachelor's degree in Electrical, Industrial, or Chemical Engineering and 12+ years of experience, 4 of which should be PCB related. Additional work experience can be used in lieu of degree/combined with education.Demonstrated experience with PCB design and manufacturingDemonstrated experience operating, maintaining, and troubleshooting PCB fabrication equipment, software, and suppliesDemonstrated experience performing inspection of PCBsDemonstrated ability to advise and assist engineers with PCB fabrication best practicesDemonstrated experience working on a teamStrong customer service and interpersonal skillsDemonstrated ability to manage and prioritize multiple tasks, and adapt quickly to changing requirementsAbility to obtain and maintain IPC specialist-level certifications related to PCB manufacturing Demonstrated ability with Microsoft Office applicationsPreferred Experience, Skills, and Education:Altium training and designOriginal Posting Date:2024-06-04While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $108,550.00 - $196,225.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.