We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Description:Position Details:Monday - Friday 1st Shift hours, flexible start time between 4am and 6amPay starting at $35.00 per hour or more depending on experience$10,000 Sign On Bonus (Terms Apply), Safety Boot Allowance and Benefits on Day 1 of EmploymentWe Deliver the Goods:Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much moreGrowth opportunities performing essential work to support America’s food distribution systemSafe and inclusive working environment, including culture of rewards, recognition, and respectPosition Purpose:Under general supervision, performs the troubleshooting, repair and maintenance of material handling equipment (forklifts, palletjacks, scrubber, etc.). Maintains the facilities material handling equipment according to an established preventative maintenance schedule and on 'as needed" basis. Observes all safety and regulatorystandards. Ensures quality of work product while working in a efficient and timely manner. This position functions as a team memberwithin the department and organization as required, and performs any duties assigned to best serve the Company.Responsibilities may include, but not limited to:Obtains daily work orders for material handling equipment maintenance and/or repair. Minimize down time for equipment.Orders necessary parts required to maintain equipment.Performs preventative maintenance according to equipment standards, guidelines and timeframes.Ensures batteries and battery charging equipment are properly maintained and functional according to standards.Maintaining maintenance shop in a clean and orderly manner. Keeps accurate maintenance records and is financially prudent withall expenses incurred.Follows all safety standards and policies.Performs all needed general maintenance and repairs for grounds, warehouse, shop and office facilities.Performs other related duties as assigned.Qualification:Required Education: High School Diploma/GED or Equivalent ExperienceRequired Experience: 4 - 6 years in material handling equipment maintenance and general maintenance and repairs for large warehouse, fleet shop and office facilities.Company descriptionPerformance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams.Awards and AccoladesPerformance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Overview: SimVentions, consistently voted one of Virginia's Best Places to Work, is looking for an experienced Software Developer to develop weapon system control software based in Java. This position is located on-site at our Dahlgren office in King George, VA with some limited hybrid potential, after initial onboarding period. Travel: None Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: Minimum of 5 years of experience conducting coding with C++, Kotlin, Java, and other related/similar softwareMinimum of 3 years of experience with DoD research and development programsKnowledge of hardware architectures, microcontrollers and communication protocolsKnowledge of writing test cases, unit testing and validation of hardware software integrationKnowledge of the TCP/IP protocol suite, including network stack integration and socket programmingKnowledge in diagnosing and resolving network-related issues, including network configuration, connectivity, and data transmission problemsKnowledge of Weapon Systems and Command & Control SystemsWorking on base at NSWCDD 2-3 days per week Responsibilities: Develop software for existing control systemsSupport testing and assessment of embedded systems locally and at external locationsUtilize software development best practices within government development processesIdentify and incorporate the latest hardware, technology, and techniques in this rapidly evolving environmentRoutinely collaborate with the government team through regularly scheduled meetings onsite Preferred Skills and Experience: Attention to details and following established processesExcellent oral and written communication skills Education: A Bachelor of Science (BS) degree from an accredited college or university in an engineering, scientific, or technical discipline is preferred but not required. Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate’s experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements.The projected annual compensation range for this position is $92,000.00 - $135,000 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we’re committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs.We offer:Medical, dental, vision, and prescription drug coverageEmployee Stock Ownership Plan (ESOP)Competitive 401(k) programsRetirement and Financial CounselorsHealth Savings and Health Reimbursement AccountsFlexible Spending AccountsLife insurance, short- & long-term disabilityContinuing Education AssistancePaid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military)Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counselingSupplemental Benefit Program Why Work for SimVentions : SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It’s also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together.Support Our WarfightersSimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world.Drive Customer SuccessWe deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact.Get Involved in Giving BackWe believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year.Build Innovative TechnologySimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer’s success.Work with Brilliant PeopleWe don’t just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture.Create Meaningful SolutionsWe are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve.Employees who join SimVentions will enjoy additional perks like:Employee Ownership:Work with the best and help build YOUR company!Family focus:Work for a team that recognizes the importance of family time.Culture:Add to our culture of technical excellence and collaboration.Dress code:Business casual, we like to be comfortable while we work.Resources: Excellent facilities, tools, and training opportunities to grow in your field.Open communication:Work in an environment where your voice matters.Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development.Employee Appreciation:Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more.Founding Partner of the FredNats Baseball team:Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite.Food:We have a lot of food around here!FTAC

Potential Earnings: $111,709.33Salary: $54,990.00 - $91,402.93 based on experienceBonus Potential: $56,719.33 based on set performance goals 100% Paid Life InsuranceBenefits Include:Paid vacation and holidaysMedical, Dental, and Vision InsuranceMatching 401(k)Paid on-the-job trainingLeadership development and coachingTuition reimbursement including technical certificationsSafety shoes offered through the companyReferral programEmployee discountRequired Qualifications:Demonstrated ability to manage others (Military experience is a major plus!)Automotive repair center experience (three years or more preferred)Reliable transportation to and from workAbility to work a flexible retail schedule, including weekends and eveningsBe able to stand for extended periods and climb stairsHave effective interpersonal, and oral communication skillsAbility to perform mathematical calculations such as addition, subtraction, multiplication, division, and percentagesKnowledge of cash handling, facility management, and safety best practicesAs a Service Manager, you will:Forecast goals and objectives for the repair center and lead the team to meet them.Facilitate and conduct technical training as needed.Monitor technician productivityEstablish and maintain good working relationships with customers to encourage repeat and referral business.Maintain high-quality service repairs and minimize comebacks.APPLY NOW!PM Lube, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against based upon disability.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****************This Engineering role can be filled at Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***********************************Mid Level - $88,200 - $108,000Sr Level - $115,200- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provide complete task management of engineering issues.Perform engineering tasks as assigned by supervision applying engineering principles.Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Mid-level E02 Engineer&bull B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 Engineer&bull B.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experience PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related courseworkRotating Equipment specialtiesVibration interpretation experience

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from salary range.Paid Drive Time: Enjoy 100% pay for local travel between customer sites. Park your company vehicle at home for added convenience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor.· Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devises and other similar machinery.· Test malfunctioning systems and components using electrical and/or mechanical skills.· Maintain legible corporate and personal records of work history.· Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors.· Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment.· Perform work on minor construction and remodeling projects including startups of new installations.· Other duties as assigned. Qualifications: · 1-3 years of commercial refrigeration experience required.· Equivalent passing grade, 80% or better, on Tek Skills Level 3 test.· Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.· Must have a good driving record and be able to work independently.· Emergency on-call availability is a basic requirement.· Must be able to lift up to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Work Together, Succeed Together – Maintenance Technician Needed! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws.Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $23.00-$26.00 /hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4434 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Type of Requisition:RegularClearance Level Must Currently Possess:Top SecretClearance Level Must Be Able to Obtain:Top Secret/SCIPublic Trust/Other Required:NoneJob Family:Systems EngineeringJob Qualifications:Skills:Red Hat Enterprise Linux (RHEL), Systems Architecture, Systems Engineering, Systems ManagementCertifications:CompTIA - Security+ CE - CompTIAExperience:10 + years of related experienceUS Citizenship Required:YesJob Description:Principal Architect - LinuxSeize your opportunity to make a personal impact as a Principal Architect for Linuxwith GDIT. A career in systems engineering means designing and implementing the systems that matter most. You will ensure that Linuxsite design, architecture, and certificate services are functioning properly and securely across the enterprise. At GDIT you’ll be at the forefront of innovation and play a meaningful part in improving how agencies operate.At GDIT, people are our differentiator. As a Principal Architect for Linux, you will help ensure today is safe and tomorrow is smarter. Our work depends on a Principal Architect for Linux joining our team to bring professionalism and initiative to a fast-paced environment that offers extensive options for training, certification, and career advancement. When we succeed, you succeed and together our best becomes better.HOW A PRINCIPAL ARCHITECTFOR LINUXWILL MAKE AN IMPACT:Act as lead architect within a team of technical leads to create advanced Linux architectures and designs so they integrate seamlessly with the current Linux and Windows environment.Enterprise Authorization: Integrate Linux Systems (currently, RHEL 7/8 and Ubuntu systems) into a primary Windows environment (workstations & servers) where authentication, authorization, and accounting actives are controlled by Active Directory with PKI certificates and Single Sign On.Enterprise Provisioning: Configure new Linux systems for customer use and ensuring that initial configurations meet required enterprise baselines & controls (e.g., proper agents installed, proper configs, etc.)Integrate Linux systems with other enterprise tooling (e.g., ACAS, Splunk, SolarWinds, Backup systems, etc.)Required SkillsEducation: BS in Computer Engineering, Computer Science or related technology field. Experience may be substituted for education.Required Experience:Minimum 14yearsof relevant experience supporting projects of similar size, scope and complexity.Required Technical Experience:Thorough experience preferably with Red Hat Enterprise Linux (RHEL), Ubuntu or a derivative.Candidate will be required to acquire DoD Instruction 8570 Level II Certification within 6 months of assignment.Security Clearance Level: Active Top Secret with SCI eligibility and a T5 or T5R within the last 5 yearsRequired Skills and Abilities: Highly motivated, self-starter; ability to work alone (90% of work is individual); heavy research and development when necessary.Location: Washington, District of Columbia; limited telework may be availableGDIT IS YOUR PLACE:401K with company matchComprehensive health and wellness packagesInternal mobility team dedicated to helping you own your careerProfessional growth opportunities including paid education and certificationsCutting-edge technology you can learn fromRest and recharge with paid vacation and holidaysThe likely salary range for this position is $203,150 - $274,850. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:HybridWork Location:USA DC WashingtonAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: Pine Dental and Braces Orthodontic Assistant Full Time Monday, Tuesday, Wednesday and Friday 8:45am-5:30pm Thursday 8:45pm-2pmMaryland x-rays and Ortho License requiredBilingual preferred not requiredOrtho experienced required Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do. With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Orthodontic Assistant to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Get out into your community -- participate in local events including school screenings, presentations and any opportunity to promote a positive image of us Participate in morning huddles (hey, even ask to run one!), let your peers know how much you appreciate them, highlight great examples of customer focus, collaboration etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Deliver quality and compassionate care to every patient Guide parents and patients through our processes before treatment Educate patients in oral hygiene instruction and provide postoperative instruction Prepare patient for examination and treatment Take x-rays and save to patient charts Take quality orthodontic facial photos Responsible for the operational readiness Prepare tray set-ups for dental procedures Mix amalgam, cement, pulp paste and prepare impression materials Sterilize and disinfect instruments and equipment Clean chairs and rooms Assist professional dental staff with treatment Document patient information, treatment plans, and procedures in patient chart Pour, trim and polish impression casts Fabricate custom impression trays Perform to the highest integrity by adhering to all government regulations, company standards, and company compliance programs Other duties as assigned Qualifications: Orthodontic or Dental Assistant Certification (State dependent) Preferred at least 1 year of experience in Orthodontic Assisting CPR/BLS Certification Required Willing to travel in territory assigned to team High focus on customer service and satisfaction Must love working with children Compassion and high level of service for our patients, parents and staff Integrity, always doing the right thing Dependable, reliable to be at work when scheduled Attention to detail Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines Professional manner and appearance at all times We Offer: Competitive compensation Monthly bonuses based on Office performance Comprehensive Benefits Package: Medical, Dental, Vision, 401K with match, flexible spending accounts, paid time off, company holidays and much more! We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Overview: Hogan & Sons Tire and Auto- We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The Senior Automotive Technician / Mechanicis responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s and company standards.COMPENSATION: Up to $45 Flat Rate + $1,500 Sign-On BonusAutomotive Technician / Mechanic Benefits:Competitive Bi-Weekly PayTuition Reimbursement, up to $3,000 annuallyPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceHealth/Flexible Spending AccountEmployee Assistance ProgramTelemedicine ProgramSupplemental Critical Illness, Hospital and Accident PlansLife Insurance (Company paid)Short/Long Term DisabilityHealth Savings and Flexible Spending Account401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:High School Diploma or equivalentPrefer a minimum of one active ASE or equivalent experience or trainingPossess valid driver’s license, or obtain a valid Virginia driver’s license within 30 days of hire dateAbility to work a minimum of five days, including SaturdaysSun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Securitas Technology and Solutions groups are experiencing tremendous success, and we currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on Securitas Technology products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.Securitas Technology is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. Securitas Technology security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities.Position Description:Installs intrusion, fire, CCTV, and access control security systems.Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs.Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements.Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment.Conducts tests to ensure all newly installed systems and component devices are operational.Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state or federal codes; legal and/or insurance requirements.Presents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Electronic Security policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested.Job Requirements:MUST HOLD 3 or more years' experienceinstalling and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systemspreferred.NICET Certificationpreferred.Lenel, Pro-Watch, Software House, Picture Perfect certificationspreferred.Bosch, Honeywell, Radionics, or DMP system knowledgepreferred.Edwards/EST, Simplex, or GE/Mirtone system knowledgepreferred.IP Video and IT experiencepreferred.Climb ladders that extend up to 24 ft. inheight.Carry items up to 75pounds.Ability to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.The following states require specific statesecuritylicensing requirements:Washington, Oregon,and Oklahoma. Check with local branch for licensing requirements.Benefits:Highly competitive salaryCompany VehicleCompany Cell PhoneMedical, Dental, Vision,and Life InsuranceCompany Paid Short TermDisability401K with 60% MatchPaid vacation, holiday, sick,and personal daysEducational AssistanceExceptional growth opportunitiesWe are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Starting Hourly Rate $23.25 USD per hour. The pay range per hour is $23.25 - $27.66Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting products to the guest as fast as possible, a critical differentiator, and one of the most essential Logistics functions. You will reach beyond the bounds of your team to collaborate across the enterprise and find solutions to support the business. Whether it is through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you will have a chance to positively affect thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As a Facility Attendant 1, you will perform a wide variety of minor maintenance tasks in addition to all other duties as assigned pertaining to the general upkeep and maintenance of the Distribution Center. This includes, for example:Support Maintenance Technicians in performing mechanical preventative and corrective maintenance throughout the facility, such as servicing and repair of hand tools and minor floor machines.Act as a Qualified Electrical Assistant for electrical safety processes.Support maintenance personnel in installation/removal of assorted items of equipment throughout the facility.Evaluate and inspect the interior/exterior of the facility to determine general upkeep or repair requirements.Change PIT (Powered Industrial Truck) batteries, perform preventative and corrective maintenance on batteries, keep battery equipment clean and painted, keep battery-changing records, and turn in records at shift end.Complete maintenance, cleaning, and troubleshooting of Label Tec PrintersOperate hand and power tools such as drills, saws, sanders, grinders, pneumatic tools, and welders.Construct or repair assets within the facility such as assembling furniture, building shelving or racks, and repairing workbenches utilizing skilled carpentry, welding, and fabrication as required.Complete plumbing tasks such as installation or repairing of faucets and landscape sprinklers, clean stopped drains and clean sumps and drains as required.Perform tasks such as painting and drywall repairs, concrete patching, or minor concrete replacement.Assist in all duties related to the preventive maintenance programs, such as pest control, HVAC, and update records associated with these programs.Remove cardboard bales from bailers, remove trash from buildings using large portable dumpsters, and keep building grounds in a neat and orderly manner.Operate snow removal equipment to clean all walks, roads, and parking lots as assigned.Drive Target owned vehicles to execute yard cleanup, respond to yard incidents, escort vendors, and pick up parts and materials as required.Operate all power equipment in a safe manner, always use safe lifting techniques, and promptly assist in spill cleanup to avoid risk of accidents to team members throughout the facility.Complete necessary paperwork or requisitions for materials as requested, keep daily work order logs for all workUtilize handheld devices and mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating safety hazards[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. However, job duties may change at any time due to business needs.Physical Demands (must be able to perform with or without reasonable accommodation):Lift and carry merchandise weighing up to 47 lbs. regularly, and up to 60 lbs. on an infrequent basis Move about within and around the site with great frequency (up to 10-12 hours per shift)Work in various temperature-controlled environments including temperatures below freezing (Food Distribution Center only)Work in conditions that may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAccess all areas of the Distribution Center, including the ability to travel on conveyor crossovers and reach mezzanine platforms Have full manual dexterity in both hands and wrists, eye/hand coordination, feet (e.g., operating foot pedals), manual (e.g., picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)About you: Possess or ability to obtain a valid driver’s licenseWork both independently and in a team environment[F&B Only] Comfortable working in a temperature-controlled environmentEffective communication skillsAccurately uses basic math skillsAble to be certified to operate all power equipmentAble to use maintenance tools; saws, drills, etc.Able to read and comprehend labels, tickets, instructions, etc.Able to work with minimal supervision and self-motivateBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: SimVentions is a 100% employee-owned business and has consistently been voted one of Virginia's Best Places to Work. We are looking for an experienced Journeyman Model Based Systems Engineer to provide engineering support for the Tomahawk Weapons System program. You will serve as part of a team that creates Cameo models of the system, its software, and its components. The team consists of Government and contractor personnel. Meetings will periodically take place on Dahlgren Naval base and our Dahlgren office, but technical work will primarily occur in either our Fredericksburg or Dahlgren office (not on base). 1-2 days of telework per week is possible. Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: Ability to obtain Secret Clearance (United States Citizenship)Modeling experience (e.g., Cameo, MagicDraw, CORE, or GENESYS)5 years of technical experienceWorking group or IPT experience Responsibilities: Learn the systemUtilize MBSE tools (primarily Cameo) to develop modelsPerform scripting to export model information into other formats (e.g., Word)Provide inputs at technical meetingsReview co-workers work and provide constructive feedbackLearn and provide suggestions on processes Preferred Skills and Experience: Familiarity with white box and black box conceptsExperience routing an Information Support Plan (ISP)Scripting proficiencyExperience working with Navy weapons system requirementsFamiliarity with Agile development methods such as Kanban Education: A Bachelor of Science (BS) degree from an accredited college or university in an engineering, scientific, or technical discipline OR 4 years of experience in lieu of a degree Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate’s experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements.The projected annual compensation range for this position is $85,000 - $130,000 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we’re committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs.We offer:Medical, dental, vision, and prescription drug coverageEmployee Stock Ownership Plan (ESOP)Competitive 401(k) programsRetirement and Financial CounselorsHealth Savings and Health Reimbursement AccountsFlexible Spending AccountsLife insurance, short- & long-term disabilityContinuing Education AssistancePaid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military)Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counselingSupplemental Benefit Program Why Work for SimVentions : SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It’s also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together.Support Our WarfightersSimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world.Drive Customer SuccessWe deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact.Get Involved in Giving BackWe believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year.Build Innovative TechnologySimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer’s success.Work with Brilliant PeopleWe don’t just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture.Create Meaningful SolutionsWe are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve.Employees who join SimVentions will enjoy additional perks like:Employee Ownership:Work with the best and help build YOUR company!Family focus:Work for a team that recognizes the importance of family time.Culture:Add to our culture of technical excellence and collaboration.Dress code:Business casual, we like to be comfortable while we work.Resources: Excellent facilities, tools, and training opportunities to grow in your field.Open communication:Work in an environment where your voice matters.Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development.Employee Appreciation:Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more.Founding Partner of the FredNats Baseball team:Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite.Food:We have a lot of food around here!FTAC

Like Working with Tools Join Our Maintenance Team! What you will be doing: We're seeking a skilled and reliable Maintenance Technician to join our team! If you take pride in hands-on work and have experience in maintenance, we want to hear from you. This role is perfect for someone who thrives in a fast-paced environment, values quality workmanship, and is committed to keeping our properties in top condition while providing excellent service to residents.As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws.Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $25.00-$28.00 /hrUp to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4435Get To Know Us:Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $25 - $38 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Type of Requisition:RegularClearance Level Must Currently Possess:SecretClearance Level Must Be Able to Obtain:SecretPublic Trust/Other Required:NoneJob Family:TrainingJob Qualifications:Skills:AEGIS Combat Systems, Classroom Teaching, Fire Control SystemsCertifications:NoneExperience:7 + years of related experienceUS Citizenship Required:YesJob Description:Training Specialist Advisor - Aegis Weapon System (AWS) Technician Fire Control System (FCS) TrainerTransform technology into opportunity as a Training Specialist Advisor with GDIT. A career in enterprise IT means connecting and enhancing the systems that matter most. At GDIT you’ll be at the forefront of innovation and play a meaningful part in improving how agencies operate. At GDIT, people are our differentiator. As a Training Specialist Advisor, you will help ensure today is safe and tomorrow is smarter. Our work depends on Training Specialist Advisors joining our team to develop, organize, and conduct training and educational programs for the US Navy, in support of Aegis Weapon System (AWS) Technician Fire Control System taught at Aegis Training and Readiness Center Dahlgren, VA.HOW A TRAINING SPECIALIST ADVISOR WILL MAKE AN IMPACTDevelops, organizes and conducts classroom and lab training for Fleet ACNT technicians on Baseline 9C supporting maintenance and operation of the Aegis Weapon System.Develops, tests, maintains and delivers training programs and related materials in support of Surface Combat Systems Training Command ATRC training objectives.Teaches approved course content and objectives. Conducts dynamic assessment of the sailors’ abilities to comply with approved maintenance and operational procedures and thereafter provides formal appraisal of performance with recommendations for improvement and methods to maintain technical and tactical proficiency.Reviews and analyzes U.S. Navy Aegis Combat System Engineering Capabilities and Limitations and U.S. Navy Operational and Tactical doctrine and integrates and conceptualizes the execution of Doctrine optimizing the application of ship's Combat Systems capabilities and limitation in the dynamic operational tactical environment.Observes and assesses contemporaries during Practice and Certification Teaches per requirements NAVEDTRA 135. Prepares; reviews; and customizes curriculum lesson plans and instructor guide in support of traditional classroom teaching.Conducts training sessions and develops criteria for evaluating the effectiveness of training activities. Maintains records of training activities, participant progress and program effectiveness. Supports updates of course curriculum on a regular basis to ensure timeliness and relevance. Maintains current knowledge of relevant technologies as assigned.WHAT YOU’LL NEED TO SUCCEED:Education - Bachelor’s Degree in a related technical discipline, or the equivalent combination of education, technical certifications or training, or work/military experience.Prospective employee must haveseven (7) years of experience with the Aegis Computer Network / Aegis Weapons System as either a maintenance technician or operator with responsibility for teaching the applicable system or function task to others in an apprentice level training environment. Of theseven years, one (1) year experience as an instructor in a Navy Training Environment, to include curriculum maintenance, writing learning objectives, preparing test items, evaluating instructional materials and the results of instruction and counseling students on academic learning problems.Firecontrolman Naval Enlisted Classification codes, (NEC) V02C, V47A, V59A, V67A, V74A.Must be able to support training with extended periods on your feet while instructing.Travel may be required up to 10% of time.Security Clearance level; SecretLocation; Dahlgren, VASCSTC/ATRC/TACTRAGRU experience is a significant plus.GDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from Rest and recharge with paid vacation and holidays#DahlgrenAegisThe likely salary range for this position is $83,429 - $97,750. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA VA DahlgrenAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

The pay range per hour is $45.50 - $54.33Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About job:Currently hiring for below shifts:B3: 9pm-7am Tue-Friup to $2.50 shift differential based on KeyBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 3 (MT3), you will be a key technical subject matter expert that ensures high equipment availability rates. You will use preventive and predictive maintenance processes, rapidly troubleshoot equipment breakdowns, and quickly restore equipment to service. You will work with other Target maintenance technicians to solve difficult problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, handle multiple projects, and work with a sense of urgency. You will collaborate with others to perform Root Cause Analysis for equipment failures, and fix systemic issues using careful observation and diagnostic tools. You will have an expert understanding of system controls logic and troubleshooting techniques. As the technical subject matter expert on a shift, you will also act as a technical trainer, sharing your knowledge with maintenance technicians and technician trainees to enhance their technical skills and job knowledge.An individual in this role will:Maintain and troubleshoot electrical/mechanical aspects of Material Handling Equipment (MHE), including conveyors, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Control and adjust positioning accuracy and timingControl and adjust scanners, cameras, scales and printer applicatorsControl, reset, repair or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentInstall, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tachometers and encodersTroubleshoot PLC programs, components (CPU back plains, I/O boards, counters, modules, and devices), field buses (ASI, Profibus, DeviceNet, etc.), and communications modules (Ethernet). Configure and adjust PLC parameters and component setupConduct maintenance and higher level troubleshooting of any robot typeTroubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and materials, up to 480VDevelop work plans with peer technicians for emergency repair of critical assetsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies, as neededNavigate ladders and gangways safely and work off platforms and equipment at significant heightsWork effectively in varied conditions, temperatures, and environmentsFrequently monitor all aspects of the internal and external worksite, which may include standing/walking for up to 10-12 hoursLift and/or move product or items up to 49 pounds[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Possess or ability to obtain a valid driver’s licenseExcellent PC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience with the following areas:Preventive/predictive maintenance proceduresBlueprint and schematic readingWork order managementIndustrial Electrical, Controls and ElectronicsProgrammable Logic Control (PLC) programsNational Electrical Code (NEC) and Material Handling Equipment (MHE) safety standardsAutomated material handling equipment or robotic maintenanceDesired:Degree from a technical or community college, or accredited industrial maintenance certifications (PLCs, Industrial Networks, Machine Logic, Robotics), with a focus in the Mechanical/Electrical fields4+ years of experience in the Mechanical or Electrical maintenance fieldBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Work Together, Succeed Together – Maintenance Technician Needed! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws.Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $23.00-$26.00 /hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC2007Get To Know Us:Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Type of Requisition:RegularClearance Level Must Currently Possess:Top SecretClearance Level Must Be Able to Obtain:Top Secret/SCIPublic Trust/Other Required:NoneJob Family:Help DeskJob Qualifications:Skills:Information Technology (IT) Support, IT Maintenance, TroubleshootingCertifications:NoneExperience:3 + years of related experienceUS Citizenship Required:YesJob Description:GDIT has an amazing opportunity for an IT Maintenance Lead to provide world-class IT maintenance support to our prestigious clientele at the highest levels of the federal government in the heart of our nation’s capital. As an IT Maintenance Lead, you set the foundation of our overall approach to executive IT support. You act as the first point of contact for our government client and exhibit the exceptional technical and customer service skills to resolve issues as quickly and efficiently as possible. You bring professionalism and initiative to a fast-paced environment that offers extensive options for training, certification, and career advancement. When we succeed, you succeed and together our best becomes better.Transform technology into opportunity as an IT Maintenance Lead with GDIT. A career in IT means connecting and enhancing the systems that matter most. In this role, you are the foundation of our overall approach to executive IT support. You act as the first point of contact for our government client and exhibit the exceptional technical and customer service skills to resolve issues as quickly and efficiently as possible.At GDIT, people are our differentiator. As an IT Maintenance Lead, you will help ensure today is safe and tomorrow is smarter. Our work depends on an IT Maintenance Lead joining our team to bring professionalism and initiative to a fast-paced environment that offers extensive options for training, certification, and career advancement. When we succeed, you succeed and together our best becomes better.HOW AN IT MAINTENANCE LEAD WILL MAKE AN IMPACT:Oversee the repair, maintenance, and lifecycle management of IT assets, ensuring their secure and optimal performance.Perform hands-on technical tasks such as computer reimaging, configuration, software/hardware updates, and proactive system maintenance to minimize downtime and address potential issues.Manage the secure handling and processing of equipment, including preparing devices for required holds in compliance with federal regulations, and coordinating the destruction of non-functional or obsolete equipment.Demonstrate attention to detail, problem solving, and desire to provide a great customer experience.WHAT YOU’LL NEED TO SUCCEED:Required Experience:Bachelors' Degree in a related discipline and a minimum of 3 years of maintenance experience preferred.Required Technical Skills: Technical support, networking, application support, problem solving.Required Certifications: CompTIA Security+ required within 6 months of start dateSecurity Clearance Level: Active Top Secret with SCI EligibilityRequired Skills and Abilities:Excellent verbal and written communication, collaborative and adaptable. Must be able to pass a basic English Language assessment test.Location: On Customer Site, Washington, District of ColumbiaThe likely salary range for this position is $100,300 - $135,700. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA DC WashingtonAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.We connect people with the most impactful client missions, creating an unparalleled work experience that allows them to see their impact every day. We create opportunities for our people to lead and learn simultaneously. From securing our nation’s most sensitive systems, to enabling digital transformation and cloud adoption, our people are the ones who make change real.Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

The pay range per hour is $39.25 - $46.87Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About job:Currently hiring for below shifts:B3: 9pm-7am Tue-Friup to $2.50 shift differential based on KeyBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Seize Your Opportunity! 50% Rental Discount Pay: $22.00 to $26.00/hour See additional benefits below! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle. Live within a 30-minute commute of the properties. HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience.Must successfully pass a criminal background check and drug screen. Benefits of Employment: Pay Range: $22 - $26 per hourUp to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4440 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment