RoadSafe is looking for Flaggers to join our team!
Applicants must pass a drug test.
Work with the Traffic Control Department at work sites to direct motorists by flagging them away from worker activities, moving equipment, oncoming traffic and perform duties listed below.
Set-up signs, cones, etc. around work areas to divert traffic Follow all safety rules and regulations and wear proper safety equipment ( work boots 6 inch with safety toe, hard hat and safety vest) Without Supervision must be able to set up and perform flagger position at job site based on site plan and or contractor directions Generally, works under the Supervision of Project Manager, TCT, TCS or maybe assigned to work independently Adhere to all Company Policies and Procedures Complete daily paperwork accurately and timely Operate 2 way radio Work well in a team environment Must be able to communicate with contractors and relate specific customer/job changes, and other information to Supervisor, Project Manager, office staff or other persons Provide highest level of customer service to all customers Excellent attendance required, dependable transportation, good work ethic All other duties as assigned
Benefits: $1500 Sign on Bonus Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off Company paid GED program HSA 2nd Chance Employer 
Qualifications: Must be 18 years or older Pass a drug test Driver’s license required Must be able to speak and read English Hold a current Flagger certification or the ability to pass Company sponsored Flagger Certification, Ability to lead a small crew Successfully pass Company sponsored Defensive Driver training All candidates subject to a background check
Work Environment / Physical Requirements: Regularly exposed to outside weather conditions; moving equipment and machinery parts; moving traffic, and fumes and airborne particles Noise level of the work environment is usually moderate/loud Regularly required to stand/walk; reach with hands and arms; for up to 14 hours a day Occasionally lift and/or move more than 50 pounds
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Our Taneytown, MD Pump Manufacturing facility is over 150,000 square feet and provides capability for engineering, design, customer service, machining, assembly, and testing for a diverse product portfolio, which serves all markets (power, oil & gas, water resources, general industry, and chemical). The facility has expanded four times since opening in 1971 to accommodate revenue growth and product line developments. The entire project lifecycle is experienced all under the same roof. Role Summary: Flowserve is looking for a Machinist at our manufacturing facility in Taneytown, MD. The candidate should be proficient in the set-up and operation of manual lathes, with exposure to CNC. The ideal candidate will have extensive knowledge of the general manufacturing environment to include, able to work safely, able to machine tolerances +/- .001, precision tool grinding, the use of overhead jib cranes, ergonomics, and inspection equipment. This machinist position requires self-inspection of parts, able to use trigonometry to find dimensions, understanding of geometric tolerancing, and being able to work in a safe and efficient manner. 2nd shift: Mon - Thur 3:30 pm - 2:00 am - 5% Differential Responsibilities: Machinist with experience running castings on manual and CNC machines.Maintain clean and well-organized work area at all times while maintaining all tooling and machinery for efficient and safe operation.Accurately machine to within a +/- .001 tolerance and familiar with prints with geometric tolerances.Comfortable with all types of precision measuring equipment and working in English and Metric systems.Experienced with jib and overhead cranes lifting large castings.Understand and operate machines, tooling, and measuring equipment properly and safely.Adhere to all Safety Procedures & Policy. Complete all Pure Safety and other safety training as required. Requirements: 2+ years machining experience in a manufacturing or repair environment operating manual lathes, milling machines, or CNC lathes/mills.Experience in using and interpreting precision measuring instruments, such as micrometers, dial indicators, and depth gaugesDemonstrated ability to read and interpret blueprints, geometric tolerances, and finishes during the application of machining.Ability to work in a team oriented and CIP environmentAbility to read and interpret instructions and drawingsAbility to follow complex verbal and written instructionsAble to stand for long periods, repetitive arm motions, frequent lifting with occasional lifting up to 50 lbs.Ability to work overtime as requiredHigh School Diploma or GED or 3-5 relevant years of experience in lieu of education Preferred: Machinist certification, training or degree related to machining is a plus.Experience in high mix, low volume manufacturing environmentForklift certification Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits! Req ID : R-9530 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P Globalo Stable industry; Year-round worko A Day in the Life of a Technician at Republic Services: https://youtu.be/mg8SNqzcZ-Io 1300-2100 Shifto $1,000 Yearly Tool Allowance, no receipts requiredo Many benefits: 401k; Medical; Dental; Vision and moreo Uniforms provided | Washed on site | Yearly boot allowanceo Up to $29/hr | Paid WeeklyPOSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance Technician B performs repair and maintenance work on diesel and non-diesel equipment and trucks including, but not limited to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC components, suspension, drive train and steering systems. The Maintenance Technician B may also perform basic tire work, such as replacement, tire rotation, and tread depth checks. Enjoy the benefits of working on a single fleet with state-of-the-art equipment, supporting our drivers as they run their routes and servicing some of the most technically advanced vehicles on the road.Tackle a new challenge every day;Maintain and repair highly intricate and powerful machinery;Receive training on new technologies and equipmentWork a regular shift in a stable industryBe recognized for exceptional performanceServe your community and your customersFollow strong career paths for professional growthEnjoy competitive wages and benefitsJoin us and help make a positive impact on your community, your environment and your worldPRINCIPAL RESPONSIBILITIES:• Maintains a working knowledge of, and moderate skill proficiency in, the following vehicle components and systems, with the ability to perform preventative and repair maintenance functions, both on-site and on the road.Chassis component repair and maintenance.Refuse bodies, including control, hydraulic and electrical systems; and air and hydraulic braking systems.Engine repair and maintenance.Suspension, drivetrain and steering systems.Heating and air conditioning.Performs line maintenance welding and fabrication.Safely provides road service when necessary to ensure that the Company’s equipment is returned to operation in a safe and efficient manner.Identifies the source of the malfunctions using a variety of electronic tools.Completes applicable Company training programs.Performs other job-related duties as assigned or apparent.The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company..QUALIFICATIONS:Basic understanding of work order labor time standards.Prior experience with, or knowledge of, maintenance work to be performed on Classes 1-5 light/medium duty and heavy-duty Class 7-8 trucks, aircraft, or ships.Automotive Service Excellence (ASE) Certifications (T1-T8) are a plus but not required.Commercial Driver’s License is a plus but not required.Valid Driver’s License.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position demonstrating knowledge of both gasoline and diesel powered equipment diagnosis and repair or will be graduating from an accredited automotive college or technical school within the next 3 months.Ability to perform basic inspections with limited supervision in some (not all required) of the following heavy truck, or automotive systems: suspensions & steering; general engine, transmissions, brakes, electrical, hydraulics, drive train, diesel emissions.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationHigh school diploma, GED with 15 college credits, or GED Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

At WK Kellogg Co, we exist to create joy and connection to inspire Gr-r-reat days. We believe that doing good is always good for business and we have stood for this since Kellogg Company was founded more than 117 years ago. We are passionate about doing our part to make nutritious foods, create social connectivity and respect natural resources. Together, these actions create positive progress for people and the planet – today and for years to come. We have big plans for how we are going to accomplish this, and we would love for you to join us in this effort. Do you have a skill set for working with electrical and mechanical components Join us in our state-of-the-art facility as aMaintenance Electrician in Lancaster, PA making Frosted Flakes, Shredded Wheat, Raisin Bran, and Crispix Cereal!Kellogg is looking to bring out the tiger in you by utilizing your skill set troubleshooting, repairing, and collaborating on electrical components! In this role you will partner with Operations, Quality Food Safety, and Environmental Health and Safety personnel as you keep the plant and production running. You will act as a problem-solver who helps our company maintain a strong reputation and market share!HERE’S A TASTE OF WHAT YOU’LL BE DOINGMaintaining Equipment and Utilizing Your PLC Knowledge- You will be alternating in between troubleshooting, preventive maintenance, and on the spot machine repair. You will need a firm focus and understanding of programmable logic controllers and robotics. Candidate must be able to maintain proper documentation, electrical upgrades, and make modifications and improvements. Analyzing Conditions and Providing Solutions- Identifying and examining production equipment failures to understand root cause analysis, with the help of interpreting schematics and drawings. Investigating, analyzing and repairing electrical systems while working with PLC programming and other computer-based applications.Driving Innovation and Communication- Actively improving plant efficiency and identifying cost saving opportunities. While maintaining an open dialogue with Maintenance Supervisors, Maintenance Mechanics and Operators, on day-to-day activities and long-term improvement projects.Incentives to join our team!$36.76/hour with shift differential2nd Shift: 3pm-11pm, 3rd Shift: 11pm-7amUp to a $5,000 sign on bonus!Incredibly competitive benefits package401k matchEmployee Stock ProgramYOUR RECIPE FOR SUCCESSRequired:Journeyman’s OR Electronics/Technical Degree OR 5 years of Industrial Electrical MaintenancePLC Troubleshooting experienceHigh School diploma or GEDBasic computer skills including Microsoft OfficeDemonstrated knowledge of behavior-based safety systemsSitting, standing, walking, lifting and / or repetitive tasks throughout the day. Employee will be required to occasionally lift up to 50lbsBonus Points:Previous experience working in a food manufacturing plantPrevious experience with AutoCAD, and SAPABOUT WK KELLOGG COAt WK Kellogg Co, we bring our best to everyone, every day through our trusted foods and brands. Our journey began in 1894, when our founder W.K. Kellogg reimagined the future of food with the creation of Corn Flakes, changing breakfast forever. Since then, we have embraced the same spirit of innovation and entrepreneurship in everything we do, channeling our founder’s passion and commitment to creating high quality and delicious products while fostering communities. Our iconic brand portfolio includesFrosted Flakes, Rice Krispies, Froot Loops, Kashi,Special K, Raisin Bran,Frosted Mini Wheats, andBear Naked. With a presence in the majority of households across North America, our brands play a key role in enhancing the lives of millions of consumers every day, promoting a strong sense of physical, emotional and societal wellbeing. Our beloved brand characters, including Tony the Tiger and Toucan Sam, represent our deep connections with the consumers and communities we serve. For more information, visitwww.wkkellogg.com.WK Kellogg Co is proud to offer industry competitivebenefits(Physical, Financial, Emotional, and Social) that vary depending on region and type of role. Be sure to ask your recruiter for more information!If we can help you with a reasonable accommodation throughout the application or hiring process, please THE FINER PRINTThe ability to work a full shift, come to work on time, work overtime as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position.WK Kellogg Co is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.For US applicants:Where required by state law and/or city ordinance; this employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. For additional information, please follow thislink.Let’s create gr-r-reat days, WK Kellogg Co Recruitment

Clean Harbors Baltimore, MD is looking for a Container Maintenance Mechanic to join their team! As a Container Mechanic you will be responsible for sanding, prep work, inspecting, fabricating, cutting, welding, patching tarps or replacing tarps on the containers at Clean Harbors locations and our customer locations such as refineries. This position will require logging all the necessary entries of time and materials into an electronic repair order system. Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings! Ask a recruiter today for more information! Key Responsibilities: Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Perform compliance and safety inspections; correct equipment deficiencies and perform preventative maintenance on company owned equipment.Perform welding, cutting, grinding, mechanical repair, and all other metal working techniques consistent with the container repair trade.Maintain established shop housekeeping and building maintenance obligations as well as welding systems, general repair equipment, and shop tools.Perform surface preparation of equipment prior to painting; apply paint or similar coatings using hvlp, airless, or manual tooling and processes.Perform fabrication, cutting, and welding on roll off containersProduce quality product while focusing on given standardsLog all necessary entries of time and materials into electronic repair order systemEnsure the company truck is kept clean, tidy and free of hazards at all timesPerforms other welding duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business What does it take to work for Clean Harbors Welding (MIG & Stick) and mechanical experience in a fabrication/repair shop environment;Experience performing flat welding with steel preferred;Successful completion of Structural Welding test;Welding Certification is considered an asset;Ability and willingness to wear a respirator, must be clean shaven;Valid driver's license and clean 3-year driving record are required.Ability to pass a background check, and drug test upon hire. 40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. “2022 Top Company for Women to Work for in Transportation” *CH

Electro-Mechanical Technician Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world’s largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best. Stop and think: how would YOU put our drinks on every table Job Duties: Effectively complete preventive and proactive maintenance per the schedule to prevent breakdowns on equipment.Utilize root-cause analysis skills to investigate breakdown and line stoppages while collaborating with other departments.Acts as the "first responder" when a line stops producing and assures that the appropriate mechanical help is on site to correct any problems quickly using PLC, electrical and/or mechanical skills.Support the facility's food safety and food quality programs to assure compliance and achieve desired results.Prioritizes work to ensure timely maintenance, repair and installation of equipment, tools and utility systems to minimize manufacturing downtime and completes all required paperwork and documentation in the Computerized Maintenance Management System (CMMS).Utilizes the CMMS to open and close out work orders, check out spare parts, and other activities as required in the plant.Repair or maintain the operating condition of industrial production or processing machinery or equipment including inspection, assembly, disassembly, and replacement as necessary.Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.Operate newly repaired machinery or equipment to verify the adequacy of repairs.Analyze test results, machine error messages or information obtained from operators to diagnose equipment problems.Reviews maintenance reports and statistics to plan and modify maintenance activities.Inspects operating machines and equipment for conformance with operational and safety performance standards.Examine objects, systems or facilities and analyze information to determine needed repairs.Proven proficiency working with Basic Tool Room Equipment, Hydraulic systems, Programmable Logic Controllers and Ladder Logic.Actively pursues growth and developmental opportunities; seeks out feedback and responds without defensiveness; continuously finds ways to improve.Perform other duties as required by supervisor. Required Education, Work Experience & Certifications: Candidates must successfully pass the Ramsey Mechanical (Electrical) Skills and Aptitude Assessment in order to be considered.3+ years experience in industrial manufacturing maintenance is a must!Strong Electrical/Electronic troubleshooting and repair skills required.Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.Demonstrated ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.Able to apply common sense understanding to carry out instructions furnished in written, oral or diagram form.Computer skills.Willingness to work flexible hours.Strong written and interpersonal communication skills. Physical Demands of the Position: Standing, walking, kneeling and bending approximately 85% of dayComputer and administrative work approximately 15% of dayAbility to lift and carry up to 50 poundsAbility to communicate effectively. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: · Medical/dental/vision insurance · Life insurance 401(k) savings plan with company matchPaid holidays and vacation Make a Difference in YOUR Career!Our vision is both simple and ambitious: to put our drinks on every table.We are the world’s largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks.Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what’s best.Stop and think: how would YOU put our drinks on every table Well-being benefitsDiscount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.EducationPreferredTechnical/other training or betterHigh School or betterBehaviorsPreferredDedicated: Devoted to a task or purpose with loyalty or integrityTeam Player: Works well as a member of a groupDetail Oriented: Capable of carrying out a given task with all details necessary to get the task done wellMotivationsPreferredFlexibility: Inspired to perform well when granted the ability to set your own schedule and goalsWork-Life Balance: Inspired to perform well by having ample time to pursue work and interests outside of workSelf-Starter: Inspired to perform without outside help

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Description: For more than 110 years, Milton Hershey School (MHS) has helped children realize their full potential by offering a top-notch private, cost-free education in a residential model to students in pre-Kindergarten through 12th grade from income-eligible families. Working at MHS is much more than a job. Each employee helps shape the lives of the students we serve and every position at the school is designed to help our students thrive on campus and beyond. If that sounds fulfilling to you, MHS may be the perfect place for your next career move. MHS is currently seeking a full-time Maintenance Technician II – HVACR/Plumber to join the team. This position’s primary focus will be providing heating and cooling service, repairs, and maintenance for various residential and commercial facilities. Additionally, this position requires proficiency and diagnostic abilities in all mechanical trade disciplines including, but not limited to plumbing, residential & commercial appliance repairs and minor electrical repairs. The incumbent is required to demonstrate journeyman level skill through successful completion of a written and practical exercise. All work is to be performed in accordance with all state, local and federal codes, and regulations, and may require licensing. Work assignments will be based on the overall skills of the Technician; however, this position is required to support any of the mechanical trade disciplines. Some of the required skills and abilities are: Demonstrated knowledge in the installation, repair and maintenance HVAC/R, plumbing, and electrical systems.Demonstrated troubleshooting ability with respect to electronic controls (prior experience with a Building Automation system is a plus).Demonstrated ability to utilize hand tools, power tools and analytic tools (all tools are provided by MHS).Physical ability to perform all aspects of the job, including the ability to lift 50 pounds.Ability to utilize electronic devices (i.e. tablet) and software for work order management and communication.Ability to work independently and as a team. The work schedule is considered flex, however, after the one year probationary period the shift will be Wednesday - Saturday 1:00 pm - 11:30 pm (4 days with a 10-hour shift). A full-time schedule shall consist of forty (40) hours of scheduled work with a minimum of two (2) days off: Bargaining unit position with OPS-464. In addition to a competitive salary ($31.67 an hour plus 5% second shift differential and additional Saturday shift premium) our full-time employees receive generous health and insurance benefits (medical, dental, vision, life insurance, etc.). Vacation and Paid Time Off, a company truck (utilized when on campus only), all tools as required (campus use only) and no on-call responsibility. Qualifications: High School Diploma or Equivalent required.Minimum of 3 years' experience working in commercial and residential settings in conjunction with post-high school technical training in relevant fields such as Heating, Ventilation and Air-Conditioning & Refrigeration Plumbing and Appliances. Or, six (6) years of relevant current work experience in an institutional and residential application.EPA Level 2 Refrigeration Certification minimum, Universal Certification a plusValid PA Driver’s License in good standing. CDL license a plus.OSHA 10-Hour Training. OSHA 30-Hour Training a plus.MEWP (Mobile Elevated Working Platform) Certification a plus.Backflow Prevention Device Tester Certification a plus.Demonstrated high degree of integrity, as all MHS Staff are role models for MHS Students.Candidates should be willing to actively engage with students.

DescriptionAre you interested in leading the Mechanical Engineering for internal projects Do you want to be involved in the planning, design, compliance review, and construction oversight of technical facilities Would you like to work at the nation's largest university affiliated research center supporting construction projects of national significance If so, we are looking for some like you to join APL.As a Mechanical Engineer, you will assist in planning, development and delivery of mechanical systems to meet the design, construction, operations and maintenance requirements of a facility management program on a campus of over 3.5 million GSF. You will also provide system and component level expertise in Mechanical Engineering to evaluate new and existing systems and recommend enhancements that provide increased reliability, operational efficiency, life cycle cost savings and sustainability benefits. As a Mechanical Engineer in our Design and Construction group, your duties will include...Provide engineering and technical support to the Design and Construction Group, responsible for the system performance and tracking capacity of mechanical systems Generate designs, perform engineering calculations, and create documentation for analysis of new and existing mechanical equipment and utilities, heating, ventilating, air conditioning (HVAC), plumbing, and control systemsApply technical expertise in problem solving for mechanical construction and renovation projects Participate in commissioning mechanical equipment and system installationsSolve maintenance problems to identify root cause and recommend viable solutionsPerform mechanical system audits and inspections, as well as technical reports, cost estimates, and economic analyses to improve operating efficiency Develop and recommend mechanical engineering design guidelines for outsourced mechanical engineering firmsConsult with customers, maintenance and operations, and engineering mechanical staff Review mechanical engineering construction drawings and specifications prepared by in-house staff and consultants for sustainability and code complianceReviews design submittals, and responds to design, construction project and maintenance issuesDevelop mechanical design construction documentation and probable labor and material cost estimates for resources to accomplish construction and renovation projectsConduct field surveys, gather requirements from customers, and document existing conditions for renovation and construction projectsYou will use APL vehicles in the course of day to day operations. QualificationsYou meet our minimum qualifications for the job if you...Have 10 years as a registered Mechanical Engineer in the state of Maryland (or able to obtain Maryland license through reciprocity)Proficiency in Revit requiredSolid understanding of design trends, construction methodology, material application, and manufacturer-supplier appropriatenessAdvanced knowledge of mechanical and plumbing building systemsExperience crafting specialty mechanical / plumbing systems, such as cleanroom HVAC, high purity water, and lab gasDetailed understanding of project work plans, schedules, and budgetsKnowledge of building SMART, Building Information Modeling (BIM) and Integrated Project Delivery (IPD)Sophisticated knowledge of sustainability and LEED guidelinesAbility to work with design teams on multiple small projects of a complex scope simultaneouslyPossess a valid state-of- residence driver's license. The selected candidate will be subject to a Motor Vehicle Record check.Are able to acquire a Secret level security clearance. If selected, you will be subject to a government security clearance investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenshipYou will go above and beyond if you...Are LEED AP credentialedKnowledge of Carrier HAP and/or HVAC Solution softwareKnowledge of JCI MetasysSpecial Working Conditions: Requires the operation of APL vehiclesRequires the ability to climb ladders, scaffolding, etc. to investigate/inspect ductwork, pipes, roofs, etc.Why work at APL The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates.At APL, we celebrate our differences and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities athttp://www.jhuapl.edu/careers. About UsAPL is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law.APL is committed to promoting an innovative environment that embraces diversity, encourages creativity, and supports inclusion of new ideas. In doing so, we are committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact . Only by ensuring that everyone’s voice is heard are we empowered to be bold, do great things, and make the world a better place.

Pay: $22 per hourAt Great Wolf, theMaintenance Techniciankeeps the waterpark running and provides a safe and fun environment for guests. The Technician is responsible for installation, maintenance and repair of aquatic equipment, ensuring functionality meets all required quality standards to maximize operating time and customer satisfaction.Essential Duties & ResponsibilitiesAdheres to preventative maintenance schedule for waterpark equipment (pools, pumps, motors, slides)Conducts daily inspections of all Waterpark mechanical systems and attractions; perform general maintenance and repairs as necessaryDocuments maintenance actions, including system or equipment irregularities that require monitoringResponsible for the cleanliness and safe operation of the Waterpark area; vacuuming pools, power-washing floors as neededConducts daily water testing and adjusts using chemical treatments as neededWorks professionally with park management, lifeguards, and guestsRequired Qualifications & SkillsHigh School Diploma or equivalentMinimum 1 year experience in general maintenance, HVAC, plumbing, electrical, or aquatics maintenanceKnowledge of water chemistry, water testing, filtration, and waterpark mechanical operationsSuccessful completions of criminal background check and drug screenAvailability to work flexible hours and varied shifts including weekends and holidays, as requiredMust be at least 18 years oldDesired Qualifications & TraitsCertified Pool Operator (CPO) or Aquatic Facility Operator (AFO) license preferredExpert at hands-on equipment maintenancePhysical RequirementsAble to lift up to 75 lbs.Able to bend, stretch, and twistAble to sit or stand for long periods of timeAble to climb multiple flights of stairs on daily basis and walk frequentlyEqual Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Description Brinks Home is a leader in the smart security industry, protecting over one million people across the U.S., Canada, and Puerto Rico. Our platinum-grade protection is backed by award-winning customer service and expertly trained professionals. We strive for the highest standards for our customers while fostering a positive work environment for our employees. We create a culture that fosters innovation, celebrates creativity, and encourages authenticity. Join us and be part of a collaborative team that is relentless in our pursuit of security for life. Position Overview: We are currently seeking a determined Commercial Alarm Technician who embodies our core values: Service, Accountability, Customer Focus, Growth, and Integrity. Performs service, installation, and/or inspection of systems, working independently and with team members. Seeks and accepts guidance from senior personnel, while also providing guidance and support to those less senior. Assists the ISM as necessary. Key Responsibilities: Perform installation and service of low voltage systems in accordance with Brinks Home minimum installation standards, the National Electric Code, manufacturer’s instructions, and Brinks Home Safety PolicyFacilitate the service of common systems in your area through effective communication, leadership, and organizationService and repair common systems in your area. Assist more senior personnel in the service of complex systemsProvide training and support to less senior techniciansResponsible for customer on-boardingOperate job related mechanical equipment (bucket truck, scissor lift, trencher, etc.Communicate work in progress according to currently accepted procedureUnderstand and complete all UL, FM, and Mercantile paperwork, as required Requirements: A willingness to learn in an ever-changing industry.Basic knowledge of low voltage electronic systems.Ability to work in a high stress environment and able to work under pressure in order to meet strict deadlines.Knowledge of Access, Fire, Intrusion, and VST.Basic knowledge and understanding of IT and network infrastructure.Experience with hand tools and various power tools.Basic computer skills (Microsoft Word, Excel and Outlook).An understanding of drawings, blueprints, plans, and job specificationsAble to work well with individuals at all levels of the organization, as well as customers.Able to work independently, with little or no supervision while still providing a team-oriented attitude.Maintain proper dress code and appearance.Possess a valid driver’s license.Willing to travel.Be able to pass an extensive background check and drug screening process.Able to obtain NICET I Certification. Benefits: Brinks Home recognizes the value of benefits for you and your family, so we offer a comprehensive and competitive benefits program:Medical, Dental, Vision, 401(k) with Employer Match, Paid Time Off & Paid Holidays, HSA/FSA, Life & AD&D Insurance, Disability Coverage, Maternity/Parental Leave, Mental & Physical Health Benefits, Employee Resource Groups, Volunteer Hours, Discounted Equipment & Monitoring, Employee Referral Program, and Continuing EducationTo learn more about our company culture and career opportunities, please visit our LinkedIn and Career Page. Brinks Home provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #equalopportunityemployer #veteranfriendly

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together. ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.Here are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year.Identifies and corrects problems in Commercial HVAC field including but not limited to split system heat pumps, water source heat pumps, steam and hot water boilers, roof top package units, forced air gas units and split system air condition systems and water heaters. Must be able to resolve most multi-repeat problems. Must perform clerical duties necessary to complete requests for service efficiently.

Req ID:436688Address: 3555 Vine Street Middletown, PA, 17057Benefits: * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Hepaco, a Clean Harbors company in Baltimore is seeking a Field Service Foreperson to join our safety conscious team. This position will be responsible for the direct supervision of the Field Technicians. Forepersons and Technicians will be responsible for the performance of tasks associated with emergency response (emergency spill cleanup), hazardous waste clean-up, site-remediation (tank and pit cleaning), equipment decontamination and handling of hazardous materials. Hepaco, a Clean Harbors company is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco, a Clean Harbors company Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthComprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursement Key Requirements:Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe mannerTrain and mentor the Field Service TechniciansExecution of projects/jobs within budget and on timeEnforce and ensure OSHA, EPA and H&S standards or regulations are compliantUnderstand and work with the Coordinator in the communication of manpower, equipment and resources required to complete field service and emergency response projectsManage large scale field service and emergency response projects when directedEngage in strenuous physical labor including lifting and pulling heavy objectsOperate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing toolsWear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinationsWork in various temperatures indoors and outdoors in all weather conditionsWork in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosiveWork in potentially elevated noise levels, confined spaces, including lifting in areas of low clearanceWork at elevations including working from ladders and scaffoldingAssist in field sampling activities and calibration of metersClimb ladders, scaffolding and into and out of trucks, tanks, and various other containersWork extended (> 8 hrs.) time periodsAttend all compliance and safety update meetingsInspect drums for container integrity and regulatory complianceSafe loading and unloading of hazardous and non-hazardous wasteConduct waste stream sampling and profiling as necessaryComplete associated paperwork, such as worksheets, vehicle inspections, equipment inspections and permitsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerform other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsBy position, may perform lead responsibilitiesRequired Qualifications:Previous experience in a physically intensive rolePrevious experience in a supervisory, crew lead or leadership roleAbility to travel for extended periods of time, overnightAbility to be on-call for emergency responseValid Driver’s licensePerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards.Preferred Qualifications:Previous heavy equipment experience (bobcats, excavators, etc)Previous environmental and/or industrial experience (ie. site remediation, spill response, hydro blasting, vacuum truck, tank cleaning, refinery-based work)Commercial driver licenseHepaco, a Clean Harbors company is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial or local protected class.Hepaco, a Clean Harbors company is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Hepaco, a Clean Harbors company is a Military & Veteran friendly company.CH #HEP *HEP

INDUSTRIAL MAINTENANCE TECH New Oxford, PA 17350, USAReq #20274 Monday, June 24, 2024 As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Maintenance Technician - 3rd shiftPackaging Corporation of AmericaNew Oxford, PAPay and BenefitsPay Range = $31.50 - $35.50 based on skills and experience.Excellent Benefits Package (Health, Dental, Vision)401K Plan with company matchCompany paid STD, LTD and Life Insurance12 Paid Holidays2 Weeks’ Vacation after 90 daysUniforms ProvidedTechnicians supply their own basic hand tools. PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools. PCA provides all special and heavy tools.PCA provides Safety shoes and Safety Glass stipends ResponsibilitiesThis position is based at the PCA Box Plant located in New Oxford, PAThis position will perform a variety of maintenance tasks including diagnosing, repairing, rebuilding, or replacing mechanical, electrical, hydraulic, and Pneumatic systems on plant equipment.Technicians work as part of a team to safely perform Preventive Maintenance Activities as well as answer break down calls in a Production Environment.All Maintenance Technician positions are multicraft and training is provided to develop these skills.Basic Qualifications 2+ Years’ experience in successfully troubleshooting and repairing industrial machinery.A Technical Degree in the Mechanical or Electrical Trades is a plus.Ability to work shift work to support production schedules and Maintenance Planning and Scheduling.Be Authorized to work in the US.Experience in the Corrugated Packaging or Printing Industry is a plus. All applicants must apply at Careers.packagingcorp.com to be considered. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories. Other details Pay TypeHourly

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $18.50 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.#BA0033#

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingTuition reimbursementGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doThe HVAC Service Sales Rep is critical to the overall growth and profitability of the HVAC Service business! The chosen candidate will be responsible for initiating, establishing, and building profitable service relationships between new customers and JCI. Focus on selling renewable maintenance agreements as the key building block for establishing these relationships. The salesperson will work within an assigned geographic territory, working as part of a local branch office and teaming with sales and operations professionals within the branch. Uses sales tools to plan and document sales progress as well as increase business opportunity in current accounts. Expected to obtain and close business on a monthly basis. How you will do it Follows a disciplined and professional process to identify, target and qualify prospective new customers; takes advantage of market conditions and networks effectively to uncover new leads and contacts. Contacts prospective customers and schedules appointments. Builds a referral network to identify new customers.Conducts sales calls designed to identify key sources of problems and/or dissatisfaction confronting Facility Directors in operating and maintaining heating/cooling, ventilation and control system equipment.Develops a sense of urgency to resolve needs and positions Johnson Controls as the supplier of choice. Proposes solutions to prospective customers needs through creative and innovative application of local branch service capabilities with a focus on selling renewable maintenance agreements with an emphasis on digital service offerings, sustainability, and decarbonization. Understands the customer's business and speaks their language.Reviews and finalizes proposals with prospects and secures their commitment to the Johnson Controls solution.Conducts customer kick-off meetings, resolves customer issues, creates pull-through opportunities, maintains service agreements, extends service agreements and supports the collections process.Keeps management informed of progress and account status using the Johnson Controls Salesforce.com tool and other means. Knows when to call for assistance from management to keep the sales process moving.Develops and implements territory marketing plans consistent with the Johnson Controls Building Solutions business strategy. Attends and presents at trade shows. Participates in professional organizations.Represents Johnson Controls professionally by conducting business according to the highest standards of quality, pride, integrity, and performance. What we look forRequired:2-3 previous progressive sales roles Preferred:Aptitude for technical knowledge with high level of attention to detail Enviable presentation skills complete with the ability to captivate in both individual and group communications. Selling of "service" and intangibles Exposure to sales methodologies, standards, and disciplines. Bonus Qualifications Knowledge of Building HVAC Systems Knowledge and experience in SalesForce.com Post-secondary education#SalesHiringJohnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending*eligibility requirements vary by position**medical plans vary by locationJob Title: Ammonia Refrigeration Manager Job SummaryTo maintain Ammonia Refrigeration equipment and perform maintenance activities for buildings and equipment to support facility operations. Ammonia Refrigeration Manager is responsible for the Plants Ammonia System and ensuring all Compliance and Safety concerns are met per the EPSM. The Ammonia Refrigeration Manger is responsible for Training, Scheduling and Managing Refrigeration Tech and to ensure Ammonia Refrigeration Tech meets all requirements and safety training to ensure Ammonia System meets and performs for buildings. Major Tasks, Responsibilities, and Key AccountabilitiesComplete proper and timely preventative maintenance to ensure equipment and systems in the ammonia refrigeration system (such as compressors, condensers, evaporators, pumps, vessels, valves, purge’s, etc.) operate efficiently, properly, and safely while also down time. Replace defective refrigeration equipment as needed. Control the equipment temperature set points to accommodate the needs of our customers and maintain the integrity of the product. Maintain control of the water treatment system and associated chemicalsEnsure all paperwork and reports are accurate, completed on time and meets OSHA and EPA regulatory requirementsMonitor third party maintenance vendors working near or with ammonia refrigeration system to ensure compliance with company, OSHA, and EPA safety policiesPerform ammonia and oil sampling for analysis on regular scheduleTrain team members on ammonia leak and spill procedures, coaching those team members who require additional training to meet the standardParticipate in leak and spill drills to meet requirementsActively participate in Emergency Response planning for locationInspect, test and calibrate ammonia detection system as neededQualifications/Experience/EducationEducation - High school diploma or GED. College coursework, continuing technical education or comparable business experience, documented electrical certification experience 480/ 3 phase and control voltage preferredMinimum 3-5 years Ammonia Refrigeration experience requiredKnowledge of Process Safety Management (PSM), or ability to receive in-housePSM training within 90 days requiredCertified Assistant Refrigeration Operator (CARO) Level 1 certification fromRefrigerating Engineers & Technicians Association (RETA) or RefrigerationOperator Class 1 license or ability to obtain within 1yr of hire requiredKnowledge of Computerized Maintenance Management Systems (CMMS)Must be able to Supervise a small group of para-professional staff in an organization characterized by highly transactional or repetitive processes. Contributes to the development of processes and procedures. Typically requires 3 years experience in the related area as an individual contributor. Thorough knowledge of functional area under supervision. Bilingual PreferredJob ConditionsIndependently lift up to 40 lbs frequently and 60 lbs occasionallyAble to sit, stand, walk bend, squat on a frequent to continual basis in a refrigerated warehouse environmentAble to grasp, reach, push or pull (such as boxes of product, or a hand truck) on a frequent basisAble to step up onto and down from equipment as required by task (such as forklift, reach truck, etc.)Endurance for continuous, fast paced workMust be able to pass respirator fit test, wear respirator and may be required to wear Self-Contained Breathing Apparatus (SCBA) if authorized & trainedAble to adjust to fluctuating temperatures and withstand freezing temperatures as low as -20 degrees FahrenheitAbility to work in a noisy warehouse environmentAbility to work at elevated heights while wearing PPE (Personal ProtectiveEquipment) for the job (such as fall protection harnesses)Able to work while wearing appropriate PPE (Personal Protective Equipment)for the job (such as steel-toed protective footwear, harness, safety glasses, hardhat, gloves, insulated clothing, etc)Ability to handle and physically be near products which may contain food allergens (such as fish, shellfish, peanuts, etc.)Ability to utilize equipment for the job (such as computers, cell phone, handheld trackers, copiers, scanners, printers, etc. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $82,000.00.

Job Title:Engineering/Maintenance - ElectricianDuration : 3 months contract ON W2Location:PA 405-York-1425 Eden Rd(On-Site) Mon - Fri: 1stshift 6AM- 2:30PM Duration: 3 months- High Conversion PossibilitiesPayrate: 28$ - 30/hr.Revert back with your resume if interested atWe are looking for anEngineering/Maintenance - Electricianto join one of our Fortune 500 Real Estate clients.Job Summary Operates, inspects, and maintains mechanical and electrical equipment in assigned facilities to achieve most efficient results. Occasional driving of company van for tasks Minimizes down time through proactive performance testing and scheduled maintenance. Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety. Applies electrical code to troubleshoot and resolve basic electrical wiring / circuitry problems, install and repair electrical equipment and wiring, roughing in feeders, branch circuit cables and circuits, splice electric or communication cables/trunk lines, and trimming out (finishing) electrical devices. Uses electrical test equipment, gauges and other measuring devices to test electrical equipment. Installs Direct Digital Control (DDC) systems per manufacturer's instructions. Performs device validation and system commissioning. Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required. Responds quickly to emergency situations, summoning additional assistance as needed. Reviews historical maintenance records to develop proactive inspection, testing and preventive maintenance schedule. Operates company vehicle in a safe manner and follows prescribed routines to service locations in a timely manner. Performs other duties as assigned. No formal supervisory responsibilities in this position. Provides informal assistance such as technical guidance, and/or training to coworkers. Coordinates and assigns tasks to co-workers within a work unit and/or project. Decisions made with thorough knowledge of procedures and company policies to achieve set results and deadlines. Responsible for setting own project deadlines. Errors in judgment may cause short-term impact to co-workers and supervisor.Must Haves: High school diploma or general education degree (GED) plus a minimum of seven years experience as a licensed electrician**** Master Electrician license as dictated by local electrical codes Valid driver's license required.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Install DriverMonday - Friday 6:30am - 3:00pmAs a CSC Appliance Install Driver your days will be active,delivering and installing laundry and/or air vending equipment to a variety of places in your assigned service area. You’ll have a constant change of scenery, engage with clients and consumers daily, and learn new technology in an environment that supports your success in both your career and life.Position Duties:Deliver and Installlaundry or air equipment to customer's homes and client locationsDeliver and Install ancillary technology (card readers, digital enhancements)Drive a box truck to deliver, pick up, or repair/replace washers, dryers and/or air machinesPrepare equipment for delivery (assemble required parts prior to loading on trucks)Instruct customers and/or clients how to operate equipment in a safe and effective mannerStaying physically active loading and unloading your company truck using a 2-wheeled hand cart for support, ease and safety. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Position Requirements:High School diploma or equivalentValid Driver's LicenseMust be 21 years of age or olderAbility to pass pre-employment screeningDOT Certification is a plus!1 year of job-related experience in the areas of delivery and installation (preferred) training is providedMechanical & Maintenance Experience/KnowledgeExperience driving box trucksAbility to lift up to 100lbs in a variety of environmental conditions (both weather and non-weather related)Knowledge with computers and smart phone technologyTroubleshootingRoute Driving Experience a plus!Customer ServiceVisit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily . WHAT WE OFFER We are a large company serving many unique customers - because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering: Ongoing Education & Training Exposure to a Large Variety of Projects Industry-leading Benefit Packages Advanced support and tools designed to improve your workflow Responsibilities: This position is responsible for repairing, maintaining, and installing different kinds of electrical systems. Determines the layouts and testing of electrical patterns. Reads blueprints, runs conduit, and wires devices. Read and interpret mechanical and electrical drawings and code specifications for determining wiring layouts. Performs upgrades or preventive maintenance to electrical control systems. Runs tests, isolates problems, replaces damaged sections of wiring, and layout circuits. Other duties as assigned. Qualifications: A High School Diploma is required; prefer some trade or technical school classes. 3+ years' work experience as an electrician apprentice. Electrician apprenticeship. License as a Journeyman or Electrician to meet state requirements. Knowledge of tools, equipment, and materials common to the electrical trade. Knowledge of applicable electrical codes, standards, and regulations. Knowledge of electrical applications for high and low-voltage electric systems. Skill in the installation, repair, and maintenance of all types of electrical system equipment and components. Ability to work with minimal supervision. Must be knowledgeable in all aspects of commercial construction industry-related products and tools. Skill in both verbal and written communication. Join Us: Today, there are 22 different companies that make up the CoolSys family of brands . Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and on Twi t ter . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR ) a nd drug testing (including for marijuana) are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Sazerac Company Overview: Build your career at Sazerac! With almost 400 years of rich history, Sazerac Company has thrived as an independent, American family-owned company with operations in the United States and around the world. Since the 2000s, Sazerac has averaged double digit growth every year! Sazerac Company produces and markets the most award-winning bourbons and whiskeys in the world, including Buffalo Trace, Pappy Van Winkle, Eagle Rare, Blanton’s, and Sazerac Rye. Additionally, Sazerac owns many popular brands across a range of spirits, including Fireball, Southern Comfort, Seagram’s V.O., Myers’s, Goldschlger, Parrot Bay, 99 Brand, and Platinum Vodka.We’re proud of our award-winning culture and distilleries. Our Louisville office has been named one of the “Best Places to Work in Kentucky” four times, and our Buffalo Trace Distillery has earned the title of “world’s most award-winning distillery” through the dedication of our craftsmen for well over 200 years. Whether you’re a recent graduate or an experienced professional, Sazerac provides extraordinary opportunities for growth with competitive salaries and benefits in an exciting, entrepreneurial industry. Company/Location Overview: Iron Bull Distillery is a part of the Sazerac Company. We are in Halethorpe, Maryland and offer a great work culture, competitive compensation and benefits as well as a focus on work/life balance. We operate Monday-Thursday and some Fridays. Job Description/Responsibilities: Bio: The Electromechanical Technician is responsible for conducting both on demand and preventative maintenance across the entire plant operation. This individual will perform continuous improvement on machinery, help in developing department priorities and coach others on how to properly maintain equipment. The Electromechanical Technician will specialize in mechanical and electrical maintenance activities and projects throughout the facility.Ensure that equipment achieves highest efficiency and reliability using state of the art electronics and controls. Provide assistance in daily reduction of downtime efforts by evaluating and providing electrical specific assistance and testing of equipment and implement automation to optimized safety, quality and efficiency. Own the standard operating procedures for the specific job. Continuously improve quality driven actions that lead to the award winning results. Ensure adherence to Personal Safety, Food Safety, Quality and Environmental Policies and Practices.Understand and comply with electrical and mechanical safety requirements of position; keep safety top of mind at all times and prevent co-workers from working unsafely. Report all safety concerns and all accidents and near misses immediately. Participate in safety inspections and accident investigations. Keep workplace clean and free of debris at all times.Create and develop a personal development plan with assistance of manager to improve a skill/competency that will develop personal skills and improve performance. Improve at least one skill each year as agreed with manager. Deliver on performance against outcomes.Continuously improve the quality of processes, products, services and the culture in which we work. Continually seek ways to improve performance as measured by departmental Key Performance Indicators. Provide world class customer service to ensure defect free products meet customer demand. Actively engage in keeping work area and facility grounds up to the established standards. Performance will be measured by KPIs and the Culture survey. Continuously improve quality driven actions that lead to the award winning results.Understand and work with established standards to deliver the highest and most consistent levels of excellent customer service.Model behavior around the Sazerac Ideal Team Member Profile. Develop and maintain solid professional working relationships inside and outside the company. Set a positive example and act in a manner consistent with company values. Participate in efforts to address issues identified through climate surveys and make the Company "one of the industry's most desired places to be."Perform job in a responsible manner and in compliance with Company procedures, electrical engineering practices and principles, and applicable rules and regulations including environmental compliance.Develop the skills needed to attain the desired career path within the organization. Individuals are responsible for identifying their own career goals and communicating same to their supervisor.Develop and execute PM plan for mechanical electrical and controls infrastructure.RequirementsMUSTDetail OrientedAbility to communicate with all levels of an orgAbility to manage multiple projects at one timeAbility to read and interpret electrical drawings and ladder logicApprenticeship program, technical school, or Associates DegreeStrong analytical and technical skillsStrong computer skills and high comfort using technology and systemsAbility to handle multiple tasks at one time3 Years relevant experience (minimum)Ability to operate Industrial equipment as required.Ability to pick up and/or move objects up to 50 pounds without assistance.PREFERREDExperience in Alcohol Beverage Industry or CPG overall3 Years hands on electrical experience, Allen Bradley PLC programming and hardware experience, equipment trouble shooting experiencePhysical RequirementsAbility to operate Industrial equipment as required.Ability to pick up and/or move objects up to 50 pounds without assistance.Ability to work overtime if necessaryAbility to work 12 hour shiftAbility to move about to accomplish tasks or moving from one worksite to anotherIn-person job attendanceStrong communication skillsAbility to read and writeAbility to work near moving mechanical partsAbility to pay attention to detailNoise level at work station is loud (metal can manufacturing, large earth moving equipment)Ability to work with the risk of electrical shock.#LI-Onsite#LI-KP1

AutoReqId: 19820BR Pay Class: Salaried Exempt Minimum Pay Rate: $80,810.00 Maximum Pay Rate: $111,110.00 Department: Maintenance Line of Business: Cement Operations Position Type: Full-Time Job Posting: Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. Heidelberg Materials North America operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. HERE’S WHAT YOU’LL GET TO DO This is a great opportunity for someone looking to supervise a maintenance crew with an industry leader in the cement manufacturing industry. The cement plant in Union Bridge, MD is looking for someone who is hardworking and dedicated to becoming a part of our team. This position will be responsible for all aspects of day-to-day preventive maintenance and repair activities for the department. The following are some of the responsibilities: Schedule and supervise the work as arranged through the Maintenance Planner to maintain equipment to meet production requirements.Oversee the work performed by maintenance crews and outside contractors as required for each job to ensure completion in a timely and quality manner.Manage any urgent or breakdown jobs as required to keep equipment running and minimize downtime.Provide development of direct reports and motivate staff resulting in a reliable and competent work force. Provide technical assistance to maintenance personnel toward expedient problem resolution.Execution of these specific duties will be achieved through the following:Schedule, assign, plan and monitor the work of maintenance shop personnelCoordinate with the Maintenance Planner by communicating anticipated jobs and providing input when stores stocks need to be increased or altered, for upcoming jobs to maintain maintenance schedulesWith the Maintenance Planner develop work schedules, equipment usage schedules, prioritize mechanical expenditures and procedures for equipment to meet overall plant goals.Prepare material and labor estimates to develop project cost estimates and plant budgets.Monitor the acquisition and use of materials to meet productivity and budgetary goals.Maintain time, work order, material, equipment and other mechanical shop recordsDetermine appropriate training for employees.Evaluate employee skills, abilities, safety practices and behavior to maintain the necessary skills to perform their jobs.Plan the schedules of the staff including assigning work and overtime as required to meet maintenance needs.Participate in the implementation of plant projects. Provide input into the design and implementation of mechanical aspects of projects to ensure tasks are able to be accomplished in a quality, cost-effective, and timely manner.Ensure the application of the plant’s rules of conduct, policies, and health & safety protocols during maintenance procedures to minimize injuries and lost time incidents.Provide ongoing maintenance support to the plant for all shifts by participating in the plant’s on call program. This includes evaluating and determining the course of action for maintenance incidents after hours and on weekends while on call and may require on-site supervision of the resolution to maintain operational efficiency. Must be willing to work weekends and after hours for supervision of emergency repairs as needed.Ensure that Maintenance department tools and equipment are in good working condition and that adequate stocks of consumables are maintained to allow maintenance activities to occur as scheduled.Complete assigned work and be in compliance with all Federal, State, and Local regulatory requirements. REQUIREMENTS 5 years of mechanical repair and maintenance experiencePrior supervisory experience preferredPrior experience working with heavy industrial machinery and equipmentDemonstrated ability to lead others with or without direct authorityWorking knowledge of SAPFamiliarity with Microsoft Office products including MS Excel and WordPrior experience working with or interpreting Collective Bargaining Agreements is a plusAbility to anticipate and adapt to changing situationsAbility to perform tasks that include walking, climbing equipment, working within confined spaces and occasionally lifting to 50 lbs.Willingness to provide coverage during off-shift hour and weekends as require Heidelberg materials is a drug free workplace. External candidates must be able to work in the USA without sponsorship, Employer Statement: Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Position Overview: Under the general direction of the Plant Engineer the Controls Electrician is responsible for the integration, programming, and troubleshooting of Programable Logic Controllers (PLC), Process Automation Controllers (PAC), Human Machine Interfaces (HMI), Servo Systems, Robotics, and Industrial Networks for systems to support productivity and/or quality improvements for process and packaging equipment. Responsibilities: Ensure accuracy and completeness of associated technical documentation and support technician training and development processes.Lead or provide support of focus improvement projects.Troubleshooting of various PLC and networking systems.Provide training & support to EET’s, maintenance, and operating technicians.Complete preventative maintenance on electrical, control, and networking systems.Create and maintain technical documentation of supported systems.Provide support for new equipment installations. Qualifications: High School Diploma or GEDTechnician training as electrician, electronics, or controls technology5 years of relatable work experience in manufacturing Ability to troubleshoot, diagnose and repair PC related issues down to the component level to include touch screen displays, hard drives, CD ROM drives and NIC cards.Ability to repair and / or replace components and subsequently load, configure, and parameterize both hardware and software as it may relate to industrial, process control PC’s and their related applications.Demonstrated ability to work in small cross functional groups, deliver effective communication, meet deadlines, and lead quality/process improvement teams.Excellent interpersonal and communication skills,Ability to work in a cross functional team environmentDemonstrated quality/process improvement capabilitiesKnowledge of and ability to maintain technical documentation and drawings Compensation & Benefits: Hourly rate range is $34.07 to $38.94, plus $.65/hr. shift differential for 3rd shift. Benefits include medical, dental, 401k, paid holidays and vacation. Division Description: The Baltimore Division is a fully equipped corrugated manufacturer dedicated to providing the lowest overall total costs to our customers.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. Education and Experience: Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay: $25 - $28 / hour #CAZL ExperienceRequired1 year(s): Experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 1 year(s): Experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

JOB DESCRIPTIONResponsibilities:Follow, without exception, all work instructions and safety policies, including use of all PPE and safety equipmentExamine machine controls to install plate changeovers and start-up machines for production needs when requiredPerform routine preventive maintenance checks on all production equipment and machineryRepair basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switchesObserve and listen to mechanical devices in operation to locate causes of problemDismantle devices to gain access to and remove defective partsAdjust functional parts of devices and control instrumentsInspect used parts to determine changes in dimensional requirementsLubricate and clean machinery and support equipment to maintain housekeeping and preventive maintenance standards within the plantDocument and track changeover times and recordAccomplish all work orders to maintain safety; reduce downtime; decrease scrap; improve quality production; and improve plant efficiencyFollows all safety rules and procedures including Lockout/Tagout program, housekeeping, and 5S standards and observes the operations to insure a safe work environmentPerform other related duties as assignedRequirements:We work a continuous schedule - 12 hour shifts, work 3 nights one week and 4 nights the following weekHigh School Diploma or GED3-5 years experience in maintenance within a manufacturing environment; or equivalent combination of training and experienceAbility to interpret documents such as procedure manuals, blue prints, schematics, charts, diagrams, etc.Ability to use precision measuring devices including amp meters, electric meters, and hydraulic gaugesBasic understanding of systems, equipment and schematicsAbility to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good troubleshooting skillsBasic mathematical skills used to add, subtract, multiply, divide, and use decimals and fractionsAbility to perform work in a mature and professional manner, demonstrate personal responsibility, and perform all assigned dutiesPrior experience in injection molding or metal can assembly is not required, but is a plus #INDYork Do you want to work with people who are dedicated to innovation and making the world a better place Do you want to build a career with a company that provides opportunities for growth and development Mauser Packaging Solutions is that company.Our mission is to help our customers achieve better sustainability with their packaging. And we do that by giving our people the opportunity to do important work, solve interesting problems and be part of a diverse, forward-looking team.At Mauser Packaging Solutions, you can be proud to work for a company that’s always striving to innovate and serve customers betterand help them be better stewards of the environment.Whether you’re a seasoned professionalor just beginning your careerthere’s a place where you can help make a difference at Mauser Packaging Solutions. Join us! Mauser Packaging Solutions is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Mechanic to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be responsible for carrying out all corrective, preventative, and predictive maintenance on fleet vehicles to ensure the safe, efficient, and reliable operation. In addition, you will be responsible for maintaining fleet vehicles in a safe working condition meeting DOT or other regulatory requirements. At UniFirst we have a standard Monday - Friday work week with periodic and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Verify all vehicles and drivers are properly licensed. Ensure all preventative maintenance is performed when due. Verify that the appearance of fleet vehicles meet UniFirst standards. Sustain a clean, safe, and maintained garage. Purchase parts and monitor quotes for best pricing and quality. Provide back up for a shuttle run when needed. Ensure all corrective, preventative, and predictive maintenance on fleet vehicles is completed and up to date. Maintain fleet vehicles to ensure they are in safe working conditions, meeting DOT or other regulatory requirements. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High School Diploma and/or GED equivalent is preferred Must be 21 years of age or older. Associates degree from an accredited technical school and equivalent experience is preferred. Valid driver's license and a safe driving record are required. Must meet DOT requirements. Must be able to perform all vehicle repairs, have diagnostic knowledge with GM drivability, and some diesel experience is highly preferred. Must be willing to work overtime as needed and perform occasional road calls. 3 - 5 years of proven medium to heavy-duty vehicle repair including: Preventative Maintenance, tire & wheel, air & hydraulic brakes, drivetrain, computerized diagnostics, suspension, electrical and A/C. Proven computer skills and ability to use diagnostic software Ability to lift up to 80lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's "Best Companies to Sell For" list and recognized on Forbes magazine's "Platinum 400 - Best Big Companies" list. As an 80-year old company focused on annual growth, there's never been a better time to join our team.UniFirst is an equal employment/affirmative action employer. If you need accommodation for any part of the application process because of a medical condition or disability, please send an e-mail to or call to let us know the nature of your request. UniFirst Recruiters and/or representatives will not ask job seekers to provide personal financial information when submitting a job application. Please be vigilant as such requests for information may be fraudulent.

AmeriPro Roofing, one of the largest residential roofing contractors in the nation is immediatelyHiringOutsideSales Representatives in Northern and Southern Maryland!Outside Sales Representatives educate and inform homeowners on what they're entitled to through storm damage as it relates to roofing, siding and gutter projects protecting their most valued investment at a fraction of retail costs! Make the income you deserve today!What separates AmeriPro Roofing from the competition Everything...What sets AmeriPro Roofing apart is our fully staffed departments for every stage of the job process, giving Outside Sales Representatives more time in their day! We provide measurements, estimating, supplements, reinspection's, material ordering, sub-contractors, collections of funds, and working with the mortgage company. Don't wait to get paid your hard-earned commissions after the installation. We pay out commissions on collected revenue as you turn in checks. We are a fast-growing company, operating in 40 markets across 19 states, with the goal of 50 branches within 5 years!Outside Sales Representatives are instrumental in that growth!Compensation& Benefits for Outside Sales RepresentativesDraw advancement vs Commission (used as steady pay)Commission on approved sales (paid on collected revenue)$67,000 - $266,000 / yearVehicle allowance (provided for qualifying vehicles)Quarterly Bonus (based on revenue goals)Full Insurance Benefits (Health, Dental, Vision and Life)401K with 4% Employer MatchSales Support Staff (lead generation, customer service, inside sales, supplements, estimating, production)Training & Development ProgramW-2 position (NOT 1099) No project managementCompany Issued Leads Provided (to supplement self-generated)Opportunity for growth and advancementResponsibilities for Outside Sales RepresentativesHunters wanted to prospect, qualify, identify, and close new sales opportunities (targeted canvassing, referrals, preset leads, networking, social media)Manage and maximize assigned territoryConduct exterior property inspection identifying for wind and hail damageConvert inspection to claim filed and contract signedReview Scope of work summaries and sign contract with homeownersMeet the Insurance adjuster on propertyCollect funds and insurance deductible from homeownerObtain Referrals from customers on approved sales/networkingBuild relationships by earning trust with Homeowners (Under Promise and Over Deliver)Educate customers on the industry, products, and AmeriPro’ s policies and proceduresMethodically manage your sales pipeline via our CRMMaintain constant communication with Sales Leadership, homeowners, and office staffPrepare & attend weekly sales meetingsFollow AmeriPro' s Sales System, policies, processes, and proceduresQualifications for Outside Sales Representatives2+ years proven full cycle sales experience (preferred)Must have a reliable working vehicle with insurance coverage (10 years or newer preferred to qualify for allowance)Excellent communication, time management and organizational skillsMust have, or obtain, a smart phone capable of downloading apps and taking pictures.Industry knowledge (preferred)Previous experience using a CRM platform requiredExperience following a documented consultative, sales system preferredSelf Sufficient; Must be able to work in an independent environment.Dedication to personal career development by reaching your set goalsMust have a valid Driver's license (Any State applicable)21 years of age or older preferred (for Insurance purposes)#LP

Futures start here. Where first steps, new friendships, and confident learners are born. At KinderCare Learning Companies, the first and only early childhood education provider recognized with the Gallup Exceptional Workplace Award, we offer a variety of early education and child care options for families. We pave the way for their lifelong learning journey ahead. And we want you to join us in shaping a future we can all be proud to sharein neighborhoods, at work, and in schools nationwide. Our teachers, center staff, and field leaders are the heart and soul of our business. When you join us, you’ll be directly supporting children and their education every day and experiencing the trials and triumphs that come with that responsibility. But you’ll never be alone. You’ll do it all with a village of dedicated and passionate humans who care as much about helping kids reach their highest potential as you do. The best part Seeing the positive impact you’re making on the lives of young learners and their familiesand knowing that your work matters. When you join our team as a Teacher you will: Implement KinderCare's curriculum, and State Pre-K requirements, in a way that is consistent with the unique needs of each child; create a safe, nurturing environment where children can play and learn.Partner and communicate with parents, in your a shared desire to provide the best care and education for their children.Support your center’s success; partner with center staff and leadership to achieve goals around enrollment, accreditation, and engagement.Cultivate positive relationships with families, teachers, state licensing authorities, community contacts and corporate partners. Qualifications: Outstanding customer service skills, strong organizational skills, and the ability to multi-task and handle multiple situations effectivelyPossess active Child Development Associate (CDA) Credential or meet NAEYC and state Pre-K candidacy requirementsMeet state specific guidelines for the rolePhysically able to use a computer with basic proficiency, lift a minimum of 40 pounds, and work indoors or outdoors. Able to assume postures in low levels to allow physical and visual contact with children, see and hear well enough to keep children safe, and engage in physical activity with children.Read, write, understand, and speak English to communicate with children and their parents in English Our benefits meet you where you are. We’re here to help our employees navigate the integration of work and life: Know your whole family is supported with discounted child care benefits.Breathe easy with medical, dental, and vision benefits for your family (and pets, too!).Feel supported in your mental health and personal growth with employee assistance programs.Feel great and thrive with access to health and wellness programs, paid time off and discounts for work necessities, such as cell phones. and much more. We operate research-backed, accredited, and customizable programs in more than 2,000 sites and centers across 40 states and the District of Columbia. As we expand, we’re matching the needs of more and more families, dynamic work environments, and diverse communities from coast to coast. Because we believe every family deserves access to high-quality child care, no matter who they are or where they live. Every day, you’ll help bring this mission to life by building community and delivering exceptional experiences. And if you’re anything like us, you’ll come for the work, and stay for the people. KinderCare Learning Companies is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, military or veteran status, gender identity or expression, or any other basis protected by local, state, or federal law.Primary Location : Mechanicsburg, Pennsylvania, United StatesJob : Teacher and Center Staff

Description TheSecurity Enterprise Solutions (SES) Operationis the cornerstone of Leidos’ comprehensive suite of fully-integrated security solutions for aviation, ports, borders, and critical infrastructure customers around the world. With our new, combined portfolio, our operation has more than 24,000 products deployed across 120 countries. Leveraging this portfolio, our core technical strengths, and robust R&D initiatives, we are positioned to address emerging and evolving threats through rapid development of innovative solutions for our global customers. Travel to various customer sites domestically and internationally as required. SES is comprised of three divisions to align with our customers’ missions and needs:Aviation SolutionsPorts & BordersGlobal ServicesSPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIESINCLUDE BUT ARE NOT LIMITED TO:Performing customer support activities involving the installation, modification, and repair of complex equipment and systemsConducting on-site installation and testing of equipment to ensure proper working order.Isolating equipment start-up malfunctions and taking corrective action.Performing ad-hoc and predetermined work assignments with instructions.Following all established guidelines, procedures and policies. Working on assignments which are semi-routine in nature where ability to recognize deviation from accepted practice is requiredManaging resources, maintaining schedules, and coordinating all repair activities in priority sequence to ensure adherence to contractual service level agreements (SLAs); and Working in a customer environment with systems operated in a 24/7 environment which require immediate response times (either while on-shift or after hours on-call) and driving long distances to sites.Accepting and updating work order in CRM systems such as Salesforce, Maximo, and GURU for our customers.Basic Qualifications:Related Trade experience (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 2 years of electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs.Minimum of 2 years’ experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment.Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice.Must be able to pass an in-depth background check (TSA eQIP).Preferred Qualifications:Possess excellent organizational, communication, interpersonal skills with the ability to multitask several projects at once.Excellent customer service skills and the ability to handle stressful situations.Self-motivated, reliable, and accountable individualMust be able to lift/carry 50 lbs.Must be able to push/pull 200 lbs.Must be able to move/ manipulate equipment weighing up to 1000 lbs. with the assistance of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation.Job requires frequent bending, stooping, twisting, turning, and working in unusual positions requiring full body mobility.Must be able to work safely and follow safety precautions in extreme environments (temperature, humidity, noise, confined spaces, etc.) around dangerous industrial equipment.**Salary Range for this position: $65,000 to $72,000 **Original Posting Date:2024-05-21While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $44,850.00 - $81,075.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Field Technician IIGDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career.At GDIT, people are our differentiator. As a Field Technician II you will help ensure today is safe and tomorrow is smarter. Our work depends on Field Technician II joining our team.HOW A FIELD TECHNICIAN II WILL MAKE AN IMPACT• Provides technical support and troubleshooting to network, desktop, and/or systems hardware and software• May coach and provide guidance to less-experienced professionals• Applies basic diagnostic techniques to identify problems, investigate causes, and recommend solutions• Provides remote support access through desktop mirroring and other remote access applications for worldwide sites• Identify, investigate, resolve, and follow-up problems brought to the helpdesk by users of cloud infrastructure• Modifies, moves, and installs new equipment• Performs technical tasks and provides site support.• Performs integrity testing and interviews customers to gather information about problems• Will interface with our Tier 2 technical support team and our Availability Management team to escalate any issues that require additional assistance to resolve• Will preform Data Transfer Agent requests to transfer files between networks.WHAT YOU'LL NEED TO SUCCEED:• Education: Associates of Arts/Associates of Science• Required Experience: 1+ years of related experience• Required Technical Skills: Installs, modifies, and repairs computer hardware and software both in person and using remote access tools• Security Clearance Level: TS/SCI w/Poly• Required Skills and Abilities: Maintains current knowledge of relevant technology as assigned• Location: Client Site• US Citizenship Required• Shift: Monday - Friday 10am-6pm• Some travel will be required. Must be willing to travel to Texas 4 times per year for COOP exercises as well as in the event of an unplanned emergency.GDIT IS YOUR PLACE:• 401K with company match• Comprehensive health and wellness packages• Internal mobility team dedicated to helping you own your career• Professional growth opportunities including paid education and certifications• Cutting-edge technology you can learn from#GREENWAY#ITPolyMD Work Requirements.cls-1{fill:none;stroke:#5b6670;stroke-miterlimit:10;stroke-width:2px} Years of Experience 1 + years of related experience* may vary based on technical training, certification(s), or degree.cls-2{fill:none;stroke:#5b6670;stroke-miterlimit:10;stroke-width:2px} Certification Comp TIA Security - CompTIATravel Required Less than 10%.cls-3{fill:none;stroke:#5d666f;stroke-miterlimit:10} Citizenship U.S. Citizenship RequiredSalary and Benefit Information The likely salary range for this position is $89,250 - $120,750. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. View information about benefits and our total rewards program. About Our WorkWe are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 30 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. GDIT is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class.

Salary:$18.00 an hourR204231008891000 Kreider Dr, Middletown, Pennsylvania 17057T ruGreen accepts applications on an ongoing basis. Job Description Field Operations Every TruGreen associate is committed to quality. We all have an important role to play in the success of our company. There is no job too small or too great that doesn't equally impact our future.We know there is no business without the people behind our brand that make it - and our services - a reality. You play a critical role in contributing to a high-performing team.At TruGreen, we are committed to our customers, our teams, our values and the science of lawn care. A career with TruGreen is a career full of new opportunities to learn and take pride in your work.#BeTruGreen and find yourself with a satisfying and rewarding career.What's In it for YOU!A job that keeps it interesting-no two days are alike, and you get to work outside instead of inside a stuffy officeAwesome teammates who are dedicated to our values, customers, lawn science, and YOU!Competitive wages* Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations)Affordable medical and prescription drug plansFinancial health resources, including 401kTraining & DevelopmentPaid Time Off/Sick LeaveYour ResponsibilitiesYou are a TruGreen ambassador, responsible for creating positive relationships between our customers and our products. You help our customers live life outside.Responsibilities include:Administer timely lawn applicationsDiagnose and correct customer problems through service calls and other communicationsRecommend and sell products and service information to new and existing customers, resulting in growth of our customer baseComplete production reports, new sales forms, customer invoice forms, daily vehicle inspection report, and cancel/skip noticesNote: All positions require a valid driver's license, and some may require appropriate state/local licensingIncluded RolesLawn Specialists (Residential or Commercial)Tree & Shrub SpecialistAeratorLaborerWarehouse TechnicianAs America's number one lawn care company, TruGreen® is dedicated to using our science-based expertise and local experience to create beautiful, healthy properties across the nation. Through our lawn and tree & shrub services, we help improve the health and beauty of outdoor spaces everywhere, so people can Live Life Outside.Ability to speak, read and write fluently in English is required.You MUST BE physically located in the United States while performing this job.TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace.TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position.We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit https://trugreen.phenompro.com/us/en/eeoc-and-eeo-policy or to request an application accommodation, please visit https://trugreen.phenompro.com/us/en/disabilities-accommodationsCalifornia Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references.TruGreen performs pre-employment testing.To view our disclaimer, https://trugreenjobs.com/us/en/disclaimer

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently hiring a Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. Candidate requires sufficient electrical and mechanical knowledge and must pass online and hands-on assessment.Responsibilities and DutiesTroubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encodersInspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer platesInspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coilsInspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumpsWelding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of workPerforming preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $37.73 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationA High School Senior (age 17 or older)*, High school diploma, a GED, or 15 college semester hours *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

At WK Kellogg Co, weexist to create joy and connection to inspire Gr-r-reat days. We believe that doing good is always good for business and we have stood for this since Kellogg Company was founded more than 117 years ago. We are passionate about doing our part to make nutritious foods, create social connectivity and respect natural resources. Together, these actions create positive progress for people and the planet – today and for years to come. We have big plans for how we are going to accomplish this, and we would love for you to join us in this effort.Looking for a challenging yet rewarding career with a company that produces the world’s most recognizable products Join us in Lancaster, PA as a Maintenance Mechanic on either 2nd or 3rd shift. This location has been cooking upcereal using ingredients from field to bowl for over 70 years! We are passionate about the products we make, the people we work with and the city we live in.As a Maintenance Mechanic, you’ll help bring cereal to customers by ensuring our production equipment is operating efficiently. You will have the chance to work on a variety of mechanical equipment from production to packaging in the plant, as well as collaborate with operations, safety, and expert maintenance leadership!HERE’S A TASTE OF WHAT YOU’LL BE DOINGConducting Preventative Maintenance–Perform basic troubleshooting, repairs and preventative maintenance on production equipment as well as building. You’ll aim for excellence every day, helping us bring the best to families!Ensuring Performance Efficiency–Manage machine performance by supporting Operations when they encounter mechanical failures or issues doing production as well as equipment set-up and change overs. We’re looking for someone who brings dedication to the table!Following Best Practices–Understand, follow and enforce all established guidelines. Your attention to detail will ensure compliance with all safety, health, quality and company policies, procedures and recognized practices. You’ll help us keep delivering success!Incentives to join our team!$36.76/hour with shift differential2nd Shift: 3pm-11pm, 3rd Shift: 11pm-7amUp to $5,000 sign on bonusIncredibly competitive benefits package401k matchEmployee Stock ProgramYOUR RECIPE FOR SUCCESSJourneyman’s OR Mechanical/Technical Degree OR 4year of equivalent experienceBasic knowledge of troubleshooting industrial manufacturing equipmentHigh School diploma or GEDBasic computer skills including Microsoft OfficeDemonstrated knowledge of behavior-based safety systemsSitting, standing, walking, lifting and / or repetitive tasks throughout the day. Employee will be required to occasionally lift up to 50lbsBonus Points:Previous experience in food manufacturingExperience with troubleshooting, repairs and preventative maintenance on mechanical and electrical equipmentKnowledge of pneumatic and hydraulic systemsPrevious welding experienceBasic computer skills, including proficiency with Microsoft OfficeABOUT WK KELLOGG COAt WK Kellogg Co, we bring our best to everyone, every day through our trusted foods and brands. Our journey began in 1894, when our founder W.K. Kellogg reimagined the future of food with the creation of Corn Flakes, changing breakfast forever. Since then, we have embraced the same spirit of innovation and entrepreneurship in everything we do, channeling our founder’s passion and commitment to creating high quality and delicious products while fostering communities. Our iconic brand portfolio includesFrosted Flakes, Rice Krispies, Froot Loops, Kashi,Special K, Raisin Bran,Frosted Mini Wheats, andBear Naked. With a presence in the majority of households across North America, our brands play a key role in enhancing the lives of millions of consumers every day, promoting a strong sense of physical, emotional and societal wellbeing. Our beloved brand characters, including Tony the Tiger and Toucan Sam, represent our deep connections with the consumers and communities we serve. For more information, visitwww.wkkellogg.com.WK Kellogg Co is proud to offer industry competitivebenefits(Physical, Financial, Emotional, and Social) that vary depending on region and type of role. Be sure to ask your recruiter for more information!If we can help you with a reasonable accommodation throughout the application or hiring process, please THE FINER PRINTThe ability to work a full shift, come to work on time, work overtime as needed and the ability to work according to the necessary schedule to meet job requirements with or without reasonable accommodation is an essential function of this position.WK Kellogg Co is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law.For US applicants:Where required by state law and/or city ordinance; this employer will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. For additional information, please follow thislink.Let’s create gr-r-reat days, WK Kellogg Co Recruitment

DescriptionAre you interested BIM support for projects on a large campus Would you like to develop and implement Mechanical, Electrical and Plumbing (MEP) BIM standards Would you like to work at the nation 's largest university affiliated research center supporting construction projects of national significance If so, we are looking for some like you to join APL.As an MEP BIM Specialist, provide professional-level services to assist in coordinating and utilizing MEP Building Information Modeling (BIM). The candidate will work in a multi-disciplined design team dedicated to providing designs and documentation for the construction and modification of APL facilities.As an MEP BIM Specialist in our Facilities, Design and Construction group, your duties will include...Use MEP BIM to support the in-house architects and engineers on their projectsWork primarily with Mechanical, Electrical and Plumbing design team members, crafting the engineering design in the BIM modelGeneral knowledge of building construction types and Engineering systemsAssist with coordinating the daily work flow of MEP BIM related activitiesAssist in the development, implementation, and quality assurance of the MEP BIM standardsMaintain the MEP Revit Template files to assure that the standards are being fully applied, integrated, and implemented into all projectsAssist in the design and management of MEP BIM workflows for internal A/E designers as well as outsourced contractorsIdentify and lead the implementation of MEP BIM technologies that enhance design processes and assists in the growth of the APL’s design goalsIdentify solutions that will use the most effective design and BIM technologies available to enhance the ability to integrate BIM with Facilities ManagementYou will apply APL vehicles in the course of day to day operations. QualificationsYou meet our minimum qualifications for the job if you...Have a minimum of five (5) years of MEP BIM production experience with building components in Mechanical, Electrical, Plumbing, and Fire Protection (suppression & alarms)Demonstrated proficiency in the use and application of:Autodesk® AutoCAD computer-aided design and drafting software.Microsoft Windows®, Excel®, and Outlook®.Experience applying the latest versions of Autodesk Revit® and NavisworksAbility to work independently and with a large teamHighly organized and able multitaskDemonstrate strong written and verbal communication skills and the ability to work with all levels of staffStrong time managements skillsMust possess a current state-of-residence driver’s licenseAre able to obtain a Secret level security clearance. If selected, you will be subject to a government security clearance investigation and must meet the requirements for access to classified information. Eligibility requirements include U.S. citizenshipYou will go above and beyond if you...Have familiarity with BIM software as it’s related to Facilities Management and the use and integration of Revit with Tririga, Maximo, Cobie, Navisworks and the various other Facilities Management software add-onsHave two (2) years’ experience in BIM Coordination/Management roleHave an Engineering degree with minimum of five (5) years practicing design experience Special Working Conditions: Requires the operation of APL vehiclesRequires the ability to climb ladders, scaffolding, etc. to investigate/inspect ductwork, pipes, roofs, etc.Why work at APL The Johns Hopkins University Applied Physics Laboratory (APL) brings world-class expertise to our nation’s most critical defense, security, space and science challenges. While we are dedicated to solving complex challenges and pioneering new technologies, what makes us truly outstanding is our culture. We offer a vibrant, welcoming atmosphere where you can bring your authentic self to work, continue to grow, and build strong connections with inspiring teammates. At APL, we celebrate our differences and encourage creativity and bold, new ideas. Our employees enjoy generous benefits, including a robust education assistance program, unparalleled retirement contributions, and a healthy work/life balance. APL’s campus is located in the Baltimore-Washington metro area. Learn more about our career opportunities athttp://www.jhuapl.edu/careers. About UsAPL is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, gender identity or expression, sexual orientation, national origin, age, physical or mental disability, genetic information, veteran status, occupation, marital or familial status, political opinion, personal appearance, or any other characteristic protected by applicable law.APL is committed to promoting an innovative environment that embraces diversity, encourages creativity, and supports inclusion of new ideas. In doing so, we are committed to providing reasonable accommodation to individuals of all abilities, including those with disabilities. If you require a reasonable accommodation to participate in any part of the hiring process, please contact . Only by ensuring that everyone’s voice is heard are we empowered to be bold, do great things, and make the world a better place.

Clean Harborsis seeking aFacility Maintenance Managerfor ourBaltimore, MDlocation. TheFacility Maintenance Managerwill oversee all employees and maintenance activities for our maintenance department. This position will also help with maintenance planning, maintenance projects, purchasing and critical parts inventory management/supplies. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5;Competitive wages;Comprehensive health benefits coverage after 30 days of employment;Generous paid time off, company paid training and tuition reimbursement;Positive and safe work environments;Opportunities for growth and development for all the stages of your career.Key Responsibilities:Ensure Health and Safety are the number one goal by following policies, processes and acting in a safe manner at all times;Supervision of all maintenance employees, on designated shifts;Oversee maintenance activities including but not limited to welding, pipe fitting, mechanical, electrical and preventative maintenance;Assure a proper Preventative Maintenance rotation occurs and is tracked through our Facility Asset Management system for all plant equipment;Manage personnel related functions for maintenance employees, including hiring, firing and performance appraisals;Manage outside contractor agreements for work planning and safety management for any maintenance orders or projects;Work with contractors as necessary to meet maintenance goals;Oversee, direct and approve work;Holding contractors and others accountable for timelines, quality of work, QC of jobs, skills levels;Parts consumptions and cost tracking as defined by GM including labor;Work with the facility management team to accomplish a common goal of reliability and run ability.What does it take to work for Clean Harbors Bachelor’s degree in engineering or related field preferred;4+ years of facility related experience required;4+ years of supervisory experience preferred;Experience in Electrical, Instrumentation and Controls preferred;Certified welder, mechanic or pipe fitting certificate an asset;Forklift training or experience preferred;Proficiency in Windows based applications;Knowledge of plant mechanical and electrical equipment and applications preferred.Join our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us atwww.cleanharbors.com/careersClean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico.Everywhere industry meets environment, Clean Harbors is one-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. We thank all those interested in joining the Clean Harbors team; however only those that complete the online application and meet the minimum job qualifications will be considered for this role. Clean Harbors is a Military & Veteran friendly company.*CH #LI-SE1