FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This Systems Engineering Supervisor will be responsible for managing the planning, design and the installation of all Sortation Equipment by Systems Engineering. Direct on-site management will be required to ensure the success of concurrent projects. This position will work side by side with Systems Programming in the development of reliable equipment that provides the most effective cost/benefit to UniFirst Corporation. The Systems Design and Installation Supervisor will report directly to the Systems Engineering Manager. List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees. Responsibilities: Budgeting, Design and Planning Perform Plant assessments and provide system recommendations for approval.Assist in the Design of Systems that will improve plant productivity, efficiency and provide for regional growth.Maintain and provide accurate records or project spending.Develop transitional plans that will allow for system installation without major impact to plant operations or UniFirst Customers.Effectively communicate to Executive and Plant ManagementSystem prerequisitesLabor demand, quantity and quality.Equipment operation and the impact on production flow.Installation timeline.Transitional difficulties. Safety Maintain safe working environment during installation for both Contractors and Plant Employees.Install systems that comply with all applicable Local and National Safety Codes.Train and promote safety in the proper use and maintenance of installed equipment.Provide documentation for all installed equipment Installation Management Effectively schedule and utilize inside/outside contractors to complete project.Coordinate resources based on UniFirst Corporation priorities.Aggressively manage project costs, without sacrificing system safety or operational effectiveness.Communicate daily and weekly expectations to contactors.Provide accurate drawings and installation details.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience designing and managing projects in the Industrial Conveyor/Material Handling Field.Candidate must be willing to directly managing project installation.Report for work at local Branch/Plant when not on the road.Experience with AutoCAD to develop detailed mechanical layouts/ diagrams for conveyors, sorters, and storage equipment.Experience with MS Office, Word,Excel, MS Project.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant Management.Strong training and presentation skillsMust have strong analytical skillsExcellent verbal, leadership, Integrity and Communication skillsMust have ability to make decisions in time-sensitive situations The estimated base salary for this position ranges from $80,000.00 to $90,000.00 annually with additional management bonus eligibility. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Information Security is crucial at UniFirst and is part of a broader Information Governance, Risk, and Compliance program within IT. The Senior Information Security Engineer will be a key factor in leveraging the current implemented security technologies and enhancing related processes and procedures. The Senior Information Security Engineer is responsible for discovering, evaluating, and delivering security technologies to protect all sensitive information. The Senior Information Security Engineer will provide technical knowledge and analysis to include applications, operating systems, vendor risk management, incident response and security awareness and training. Responsibilities: Contribute to the implementation of UniFirst’s security controls environmentProvide consultation for configuration of technologies managed by IT InfrastructureMaintain and continuously improve the security incident response planHelping with the resolution of security incidents and determining root causeEstablish baselines and monitor/report on trends and anomaliesActs as a principal resource for escalated security incidents and responseWork together with all teams to fine-tune infrastructure/application/database protection and provide input for secure software developmentConduct examinations of system logs, applications, and networks security eventsSupport IT Operations Control Center teamProviding security support for application and infrastructure related projectsConducting Security Risk Assessments on new and existing technologiesPartner in the vulnerability management programWill be a critical partner in driving an improved overall security postureQualificationsRequirements: Bachelor’s degree in Computer ScienceInformation Systems, or related discipline preferred or equivalent job experienceCISSP certification(s) preferred.Must have 5+ years of experience as a Security EngineerFamiliar with security related frameworks including CIS18, NIST and PCIExperience with Incident Management programsExperience in intrusion detection and analysisKnowledge of SPLUNK, Nessus, Email gateway, O365, and Palo Alto technologiesExperience monitoring, investigating, and solving IT security related concernsStrong interpersonal skills including strong written and oral communication skillsExperience with building & managing user awareness training programsAbility to multi-task and balance priorities Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

This position will be responsible for directly overseeing installation and repairs of the Wastewater Systems and equipment as well as audit and improve operations at locations. This position will also be required to learn how to design and suggest system layouts based on plant needs. This position will handle all personnel and material logistics necessary to complete the project. Personal “hands-on” labor will be required to assist and expedite mechanical and electrical repairs. The Project Tech will report directly to the Systems Engineering Director as well as the Environmental System Supervisor. Responsibilities: Effectively schedule and utilize inside/outside contractors to complete project assigned.Coordinate resources based on UniFirst Corporation priorities.Identify deficient equipment both mechanical and electrical. Order parts needed for repairs and with the help of the location staff make needed repairsCommunicate with location on what repairs are needed and how to prevent failures in the system.Provide accurate prints of system layout, P&ID and electrical changes made when repairing system.Reduce downtime by making sure all necessary parts are on hand.Provide critical decision making to resolve design and installation conflicts.Provide Hands On Mechanical/Electrical work and Supervision to UniFirst and contractor personnel during installation of wastewater systems.Continual Improvement-System design and installationQualificationsRequirements: Hold Mechanical/Technical degree, certification or equal “On the Job” experience.Minimum 2 years experience in the Industrial Environmental Field.Experience with MS Office, Word,Excel, MS Project.Experience or ability to learn AutoCAD to develop detailed mechanical layouts/ diagrams for WW Facilty layouts to include equipment placement, piping and electrical layouts.Experience with Electrical systems to include 460V, 240/208V, 120V as well as 24VDCExperience with mechanical systems, including Pumps, Mixers and Piping systems.Candidate must be willing to travel up to 70%, directly managing project installation.Work a 10 day ON-4 day OFF schedule when necessary to manage project installation.Must be a team player. He/She will be a part of an overall process where interaction with other employees is essential. The candidate must enjoy having a fluid interchange of ideas and recommendations from both Engineering and Plant ManagementMaintain safe working environment during installation for both Contractors and Plant Employees. The estimated salary for this position ranges from $80,000.00 to $90,000.00 annually. This range reflects various factors, including but not limited to the applicant's skills, qualifications, and previous work experience. Additionally, geographic differentials may apply based on the location where the position is ultimately filled, which could affect the final compensation. Benefits & Perks: 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. UniFirst is an international leader in garment & Uniform services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws