SEARCH
GO
Engineering Jobs
Full Time
10/14/2024
Royal Oak, MI 48067
(41.4 miles)
Corewell Health Proton Therapy Center is equipped with a state-of-art compact single room system, IBA ProtesuONE which is the second of its kind in the world. Recently, with the research and development, it is now upgraded to the DynamicARC system, first one in the world (FDA pending). The proton physicist will gain the experience from all the aspect of validation, commission and clinical operation of the DynamicARC system. Additionally, the proton staff physicist will have opportunities to participate world-class research projects in the proton therapy center including but not limited to the proton adaptive therapy, optimization algorithm development, motion management and exploring the clinical benefit of novel treatment techniques.GENERAL SUMMARY:The Staff Physicist works within the Department of Radiation Oncology. They report to the Chief of Physics and work under the guidance of the Director of Clinical Physics and Medical Physicist Ld. They perform and review all aspects of radiotherapy patient and equipment related planning and quality assurance. The primary responsibility of the Staff Physicist is to assure the best possible treatment is provided to the patients in Radiation Oncology. The Staff Physicist in Radiation Oncology responsibilities will include clinical service, research/development and education/training based on the assignments from the Chief of Physics and Director of Clinical Physics.STANDARD QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties.Education / Training: Master’s degree or PhD degree in physics, medical physics or related field or Doctorate of Medical Physics or demonstrated equivalency through experience as well as being listed as an Authorized Medical Physicist (AMP) on a Nuclear Regulatory License (NRC). Work Experience: Completion of a CAMPEP approved Medical Physics residency program in Radiation Oncology or 1 – 2 years’ experience in a related field desirable.Certification, Licensure, Registration: Certification in therapeutic medical physics (or therapeutic radiological physics or radiological physics) by either:American Board of Radiology.American Board of Medial Physics. Or must complete certification within three years of hire or must be classified as an AMP by the NRC.Other Qualifications: None.ESSENTIAL DUTIES:Clinical Service, Technical Management and ConsultationManage and monitor clinical treatment process, procedure and staff performing daily calibrations for all therapy and imaging equipment, and radioactive sources.Manage and perform acceptance testing, commissioning and routine QA of all radiotherapy equipment, imaging equipment, and planning system according to the recommendations of AAPM task group reports, industry standards, federal and state regulations.Assist the development of, and ensure staff adherence to all medical physics and dosimetry QA procedures and policies.Provide consultation with radiation oncologists on the physical and radiobiological aspects of patients’ treatments and the development of treatment plans and treatment protocols.Ensure the accuracy/appropriateness of computerized patient treatment plans performed by dosimetry staff and work in consultation with the physicians to achieve optimal care.Perform and guide dosimetry staff with patient-specific radiation measurements and calculations and assist the development/selection and specifications of any complex devices required to direct/protect critical normal tissues.Manage and perform the measurement and analysis of data used for treatment planning computer software and tests new versions of software prior to use.Development of acquisition and storage of data for treatment plans, treatment verification and evaluations.Assurance of the accuracy of dose delivery, patient position, treatment unit parameters and settings used for a patient’s treatment: including correct transfer of parameters between the CT, CBCT, CT/PET, MRI, US, treatment planning system and the treatment unit along with periodic review of each patient’s chart.Assist radiation oncologists in credentialing and supporting clinical trials. Responsible for specific QA of clinical trials and protocals.Promote clinical implementation of advanced technology and technique (hardware, software, or procedural) to improve the planning, imaging and delivering of radiation treatments.Follow regulatory and insure compliance with all local, state and federal agencies promulgating regulations affecting radiation devices and sources and radiological physics services; staff licenses, etc.Ensure accurate production of treatment accessories through monitoring of machine shop, Decimal contract, and/or outside vendor, production techniques and QA processes.Research and Development:Participate in clinical research and study on anatomic/functional/biological image guidance, treatment planning optimization, motion/variation management, and improvement of dose delivering accuracy and efficiency, as well as treatment process control and adaptation.Promote, lead and participate in advanced technology development and clinical application on imaging, dose/treatment position detection, dose response measurement, and treatment planning/delivering.Promote new research and development projects and directions to optimal treatment and patient care.Participate and provide technical support on the clinical translational study and clinical protocol development and implementation.Effort to obtain extramural funds for clinical research and technology development.Education and Training:Education of radiation oncology staff including but not limited to: Radiation Oncology Residents (physician and physics), Clinical Physics Students, Dosimetrists and Radiation Therapists.Mentoring of Radiation Oncology Residents (physician and physics), graduate students, postdocs, research associates, medical students and research fellow on research and study projects.BENEFITSCorewell offers a comprehensive benefits package to meet your financial, health and life-work balance goals.·NEW On-demand pay program – powered by Payactiv·Generous paid time off, holidays and flexible scheduling·Our employees receive special discounts on a wide range of products and services·Exceptional health, dental, vision and prescription drug insurance plans·Generous retirement savings, disability insurance, identify theft protection and even home and auto insurance·Free onsite parking at all campusesFacilitate training and continuing education of all clinical staff on treatment techniques and technology.Primary LocationSITE - Royal Oak Hospital - 3601 W 13 Mile Road - Royal OakDepartment NameRadiation Oncology - Royal OakEmployment TypeFull timeShiftDay (United States of America)Weekly Scheduled Hours40Hours of Work8-5 / 2-10Days WorkedM-FWeekend FrequencyVariable weekendsCURRENT COREWELL HEALTH TEAM MEMBERS – Please apply through Find Jobs from your Workday team member account. This career site is for Non-Corewell Health team members only.Corewell Health is committed to providing a safe environment for our team members, patients, visitors, and community. We require a drug-free workplace and require team members to comply with the MMR, Varicella, Tdap, and Influenza vaccine requirement if in an on-site or hybrid workplace category. We are committed to supporting prospective team members who require reasonable accommodations to participate in the job application process, to perform the essential functions of a job, or to enjoy equal benefits and privileges of employment due to a disability, pregnancy, or sincerely held religious belief.Corewell Health grants equal employment opportunity to all qualified persons without regard to race, color, national origin, sex, disability, age, religion, genetic information, marital status, height, weight, gender, pregnancy, sexual orientation, gender identity or expression, veteran status, or any other legally protected category.An interconnected, collaborative culture where all are encouraged to bring their whole selves to work, is vital to the health of our organization. As a health system, we advocate for equity as we care for our patients, our communities, and each other. From workshops that develop cultural intelligence, to our inclusion resource groups for people to find community and empowerment at work, we are dedicated to ongoing resources that advance our values of diversity, equity, and inclusion in all that we do. We invite those that share in our commitment to join our team.You may request assistance in completing the application process by calling .
Full Time
9/24/2024
Ann Arbor, MI 48113
(25.0 miles)
ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday
Full Time
10/19/2024
Walled Lake, MI 48390
(23.5 miles)
Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.Hybrid Schedule: (2-4) days a week in office!*Must be located in or able to relocate to the United States within the client servicing territory. Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain experience in the following:Interfacing with Local Clients.Partnering with a Variety of Utility Clients Nationwide.Working with different types of projects ranging from distribution to transmission level voltages.Electrical Power Calculations.Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Relay One Line Design.Three Line AC Schematic Design.DC Protection Schematic Design.Panel Layout and Wiring Design.Develop Bill of Materials Based on Design Criteria.Quality Control Checks on Wiring Design.Complete Project Lifecycle Support from Scoping to Final Design and Implementation.Construction Support.Applying the Minimum Requirements of the National Electrical Safety Code to the Design ProcessesWorking with Client Standards to Implement Design.Working with a Designer/Drafter to Create the Required Drawings for Each Project.Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Bachelor’s degree in electrical engineering, or related degree with two (+) or more years of Substation protection control design and/or field testing/commissioning experience.Experience in executing substation protection and control projects.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.Proactive communication with strong written and oral communication skillsYou Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Experience performing quality control checks on small substation protection and control design projects.Experience working on CAD tools such as SDS AutoCAD Electrical.Proficiency with Bentley ProjectWise data management system.Master’s degree in related field.Field testing/commissioning experience.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-09-20While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $65,000.00 - $117,500.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob
Full Time
10/19/2024
Walled Lake, MI 48390
(23.5 miles)
Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Senior Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.Hybrid Schedule: (2-4) days a week in office!*Must be located in or able to relocate to the United States within the client servicing territory.Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain experience in the following:Interfacing with Local Clients.Partnering with a Variety of Utility Clients Nationwide.Working with different types of projects ranging from distribution to transmission level voltages.Electrical Power Calculations.Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Relay One Line Design.Three Line AC Schematic Design.DC Protection Schematic Design.Panel Layout and Wiring Design.Develop Bill of Materials Based on Design Criteria.Quality Control Checks on Wiring Design.Complete Project Lifecycle Support from Scoping to Final Design and Implementation.Construction Support.Applying the Minimum Requirements of the National Electrical Safety Code to the Design ProcessesWorking with Client Standards to Implement Design.Working with a Designer/Drafter to Create the Required Drawings for Each Project.Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Bachelor’s degree in electrical engineering, or related degree with four (4+) or more years of Substation protection control design and/or field testing/commissioning experience.Experience in executing substation protection and control projects.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.Proactive communication with strong written and oral communication skillsYou Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Experience performing quality control checks on small substation protection and control design projects.Experience working on CAD tools such as SDS AutoCAD Electrical.Proficiency with Bentley ProjectWise data management system.Master’s degree in related field.Field testing/commissioning experience.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-09-20While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob
Full Time
10/19/2024
Walled Lake, MI 48390
(23.5 miles)
Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Senior Substation Protection & Control Engineer to join our team. As an Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.Hybrid Schedule: (2-4) days a week in office!*Must be located in or able to relocate to the United States within the client servicing territory.Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain experience in the following:Interfacing with Local Clients.Partnering with a Variety of Utility Clients Nationwide.Working with different types of projects ranging from distribution to transmission level voltages.Electrical Power Calculations.Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Relay One Line Design.Three Line AC Schematic Design.DC Protection Schematic Design.Panel Layout and Wiring Design.Develop Bill of Materials Based on Design Criteria.Quality Control Checks on Wiring Design.Complete Project Lifecycle Support from Scoping to Final Design and Implementation.Construction Support.Applying the Minimum Requirements of the National Electrical Safety Code to the Design ProcessesWorking with Client Standards to Implement Design.Working with a Designer/Drafter to Create the Required Drawings for Each Project.Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Bachelor’s degree in electrical engineering, or related degree with four (4+) or more years of Substation protection control design and/or field testing/commissioning experience.Experience in executing substation protection and control projects.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.Proactive communication with strong written and oral communication skillsYou Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Experience performing quality control checks on small substation protection and control design projects.Experience working on CAD tools such as SDS AutoCAD Electrical.Proficiency with Bentley ProjectWise data management system.Master’s degree in related field.Field testing/commissioning experience.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-09-20While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob
Full Time
10/7/2024
Walled Lake, MI 48390
(23.5 miles)
Description At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Substation Physical Engineer to join our team. As an Career Substation Physical Engineer, candidates will have the opportunity to work on projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.Hybrid Schedule: (2-4) days a week in office!Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamAre you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Experience in executing substation physical projectsExcellent communication skills and ability to interact with the internal team and clients to meet project needs.Performing quality control checks on substation physical design projects.Expected to read and design substation physical drawings such as one-line drawings, three-line drawings, plan-section drawings, foundation, grounding drawings.Create and check bill of materials for substation physicalExpected to attend site visit at customer locationSuccessful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget.This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Mid-Level: Bachelor’s degree in electrical engineering, or related degree with two (2+) or more years of related substation physical design experience.Senior-Level: Bachelor’s degree in electrical engineering, or related degree with four (4+) or more years of related substation physical design experience.Lead- Level: Bachelor’s degree in electrical engineering, or related degree with four (8+) or more years of related substation physical design experience.Experience with grounding studies/lightning protection and lighting studies.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.You Might Also have:US Citizen and able to pass a DOE BackgroundEngineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Working knowledge of protection and control designExperience with bus calculationExperience with WinIGS or CDEGSMaster’s degree in related field.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-08-01While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
9/28/2024
Walled Lake, MI 48390
(23.5 miles)
Description Leidos is seeking a Lead Site-Civil Engineer to manage our site/civil department in our growing Framingham, MA office to work on a variety of electric utility projects. This is an excellent career opportunity for an enthusiastic, energetic and talented individual to join a team of outstanding professionals and the opportunity to apply the latest technology to help our clients solve their most challenging problems. Typical projects involve site/civil design engineering for both large and small scale utility projects. Candidates who have commercial/industrial site development experience will also be considered for the position. Candidate will primarily function as a lead engineer performing design reviews, leading projects, overseeing junior staff members, and contributing to bids and proposal development. This role will also consist of taking a responsible engineer role on main client projects, overseeing the work and ensuring quality control on design packages. Site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events. Experience in front-facing client operations such as lunch and learns, and kick-off meetings is preferred. Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations. This position will be a lead role in a design team comprised of engineers, designers, and drafting technicians.This position will ideally be staffed at the Leidos office in Framingham, MA. However, the following locations will also be considered for this position.Orlando, FLChicago, ILCharlotte, NCWalled Lake, MIHybrid or fully remote may be considered for this role (candidate must reside within the U.S.).Key Responsibilities: Land development permitting including NPDES, stormwater management, and knowledge of other typical local, state, and/or federal regulations and permit requirementsResearch additional site data through various sourcesSite layout, grading, and drainage designStormwater modeling and designErosion and sediment control designAccess road designUtility coordination and designRetaining wall layout and designDocumentation of all supporting calculationsQuantity take-offsConstruction drawingsConstruction specificationsConstruction observation and field engineeringCoordination and collaboration with other design disciplinesBusiness DevelopmentPeople LeadershipRequired Experience & Education:B.S. degree in Civil EngineeringEngineer with 8+ years of directly applicable civil-site design experienceManagement experience preferredP.E. license preferredExperience with AutoCAD Civil 3D software and/or MicroStation OpenSite Designer softwareExperience with Hydraflow, ICPR, and various other hydrologic and hydraulic modeling & design programsProficiency using Microsoft Office suite, Adobe Acrobat, and other general software toolsStrong analytical and technical writing skillsTeam player with ability to communicate effectively with clients and staffAble to execute projects and handle clients successfully with limited supervisionWilling to travel, up to 25%Authorized to work in U.S.No two career paths will ever look the same. AtLeidos,we know the most talented and diverse engineering professionals will always have a multitude of career choices; your time at Leidos will be a wise investment in your career and in yourself.Protect yourself and your family, with thebenefitsof working for a world-class employer. When you join Leidos,you join a Fortune 500 company and one of Ethisphere Institute’s “World's Most Ethical Companies”.PowerDeliveryPDSTLINEOriginal Posting Date:2024-09-27While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $87,100.00 - $157,450.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
9/23/2024
Walled Lake, MI 48390
(23.5 miles)
Description Leidos is seeking aDistribution Engineering Supervisor in Walled Lake, MI who is passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained.As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including:• Professional Engineer License (PE)• Project Management Professional (PMP)• Leadership training & Management Opportunities• Formal Mentorship Programs• Technical Upskilling ProgramsThe successful candidate will have five+ years of experience in developing construction work packages for the electric distribution system using various software systems and construction standards.Distribution systems may be in an OH, UG, or URD environment. Project work may include grid hardening and reliability, substation optimization, joint use make ready and street light projects. Work packages will be developed using Geographic Information Systems (GIS), Computer Aided Design (CAD) tools, Work Management Systems (WMS), and other client systems. The ideal candidate will have the ability to review engineering designs with detailed eye for errors.As a Distribution Engineering Supervisor, you can expect to support the following activities with minimal oversight:Lead a team of designers and engineers to develop design and construction work packages for electrical overhead and underground distribution systems operating from 4kV through 138kV mostly associated with programmatic work such as overloaded transformers, inspection and maintenance, joint use, and inspection reports.Act as technical lead for engineers/designers to develop construction work packages included engineering calculations and constructability concern; this will including training junior engineers and designers, and entry-level techniciansWork under Engineering Manager to maintain project scope, schedule and budgeReview work provided by Client and assess requirements of scopes; Communicate work progress, technical issues, and schedule with Client.Comply with Leidos and Client Safety requirements as well as design and quality expectations.Develop permitting documents for different AHJ’sCoordinate with permit agencies, right-of-way specialists, system owners, field and forestry personnel, and 3rd party owners for joint-owned polesTravel to sites/Customer meetings as needed.Oversee on-boarding, performance, and day to day assignments of direct reportsPerform reviews (QAQC) of work by other engineers for submittal to Clients.Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met.Basic Qualifications:Requires BS Degree and a minimum of 5 yearsof prior relevant experience performing electric distribution design engineering for electric utilities; Candidates with a Bachelor's in an engineering discipline will be preferredExperience with and demonstrated proficiency in NESC Standards,Previous experience with AutoCAD and/or MicroStation, and Bluebeam and/or Adobe.Experiencewith distribution design tools such as BOUD, Pole Foreman, Spida-Calc,O-CalcProficiency in MS Office (Word, Excel, Outlook, etc.)Ability to demonstrate verbal and written communications skills.Some previous experience monitoring scopes and tracking work progress.Ability to utilize a personal vehicle,as some customer-related travel may be anticipated (Job-related travel will be reimbursed at IRS-approved ratesExperience with ESRI and GIS are preferred, but not requiredPrior team leadership experience is preferredAt Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms.At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. Apply today!PDSDLINEPowerDeliveryOriginal Posting Date:2024-09-23While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob
Full Time
10/19/2024
Walled Lake, MI 48390
(23.5 miles)
Description Substation Senior Civil/Structural EngineerLeidos Engineering offers its knowledge and expertise over a wide area of cutting-edge energy technologies and independent oversight, combined with proven business acumen. Building our work for publicly- and privately-owned utilities, financial institutions and local governments, we are able to provide our clients with business insight into all sectors of the infrastructure industry.Leidos is seeking a Licensed Senior Civil/Structural Engineer with 6+ years of experience with a utility consulting company doing design engineering and reviews. The candidate must have a strong educational background in design of steel structures, concrete structures, geotechnical engineering, and foundations. Experience reviewing substation structure design, rigid bus design, foundation design, oil spill containment design, retaining walls, masonry control shelters, and fire-walls is required. This position will consist of performing design reviews of the aforementioned civil/structural design components in support of the development of bid/construction packages for substation projects.Candidate will primarily function as a senior engineer performing design reviews on a regular basis, as well as developing junior staff members, and contributing to bids and proposal development. This role will also consist of taking a responsible engineer role on main client projects, overseeing the work and ensuring quality control on design packages. Site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events. Experience in front-facing client operations such as lunch and learns, and kick-off meetings if preferred. Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations. This position will be a senior member of a design team comprised of engineers, designers, and drafting technicians.This position will ideally be staffed at the Leidos office in Walled Lake, MI. Hybrid or fully remote may be considered here.QualificationsBachelors of Science (BS) degree in Civil-Structural Engineering - RequiredPE Licensure - RequiredExperience with Microsoft Word/Excel/PowerPoint & MATHCAD software, requiredExperience with STAAD.Pro, RISA 3D, FAD Tools, SAFE, SAG10, and LPILE software, requiredFamiliarity with AutoCAD and MicroStation, requiredStrong analytical and technical writing skillsTeam player with ability to communicate with clients and staffWillingness to travel, up to 25%Grow with us! Through training, teamwork, and exposure to challenging technical work, let Leidos show you how to accelerate your career path. Apply today!PDSTLINEPowerDeliveryOriginal Posting Date:2024-09-20While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
10/17/2024
Walled Lake, MI 48390
(23.5 miles)
Description We are seeking an Entry Level Civil/Structural Engineer with 0-2 years of experience with a utility and/or utility consulting company doing design engineering. The candidate must have a strong educational background in design of steel structures, concrete structures, geotechnical engineering, and foundations.Experience with substation structure design, rigid bus design, foundation design, site development, oil spill containment design, and design of retaining walls, design of masonry control shelters, and fire-walls is a plus. This position will be direct design of the aforementioned civil/structural design components in support of the development of bid/construction packages for substation projects.Candidate will primarily perform design calculations and develop construction grade engineering design drawings on a regular basis, under the supervision of a licensed civil engineer. Site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events. Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations. This position will be a member of a design team comprised of engineers, designers, and drafting technicians.QualificationsBachelors of Science (BS) degree in Civil-Structural EngineeringEIT PreferredExperience with Microsoft Word/Excel/Powerpoint & Mathcad softwareExperience with STAAD.Pro, FAD, SAFE, SAG10, and LPile software, (preferred)Familiarity with AutoCAD, Microstation and Civil 3D software preferredStrong analytical and technical writing skillsTeam player with ability to communicate with clients and staffOriginal Posting Date:2024-09-18While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $48,100.00 - $86,950.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
10/16/2024
Walled Lake, MI 48390
(23.5 miles)
Description Currently, we have an opportunity for an Associate Distribution Engineer for electric utility design engineering.Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth, including:• Engineer in Training Certificate (EIT)• Professional Engineer License (PE)• Project Management Professional (PMP)• Technical & Non-Technical Training Opportunities• Leadership Opportunities• Mentorship & Training Opportunities• Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain:• NESC expertise• Interface with local clients• Electrical Power Calculations• Interactions with other disciplines (Substation, Protection & Controls, and Civil Structural)• Strategic Development• Expanding a Portfolio of Business• Partnering with a Variety of Utility Clients NationwideIf this sounds like the kind of environment where you can thrive, keep reading!The Associate Engineer will assist in the development of work packages for OH, UG, URD, Make Ready and Street Light projects, and use customer GIS and WMS systems such as GE Smallworld, Bentley Expert Designer and Maximo. The candidate may have the opportunity to experience both office and in-the-field settings at customer sites, and will be trained in customer engineering and construction standards. The associate engineer will perform structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and calculations of electric demand and fault currents. Candidates will gain experience in coordination of conflicting utilities, and other field engineering design requirements, the assessment and development of design packages for complex cable/conduit projects in dense urban environments, work permit development, easements and ROW applications, and the design of mainline vault medium voltage switchgear, network system design and distribution system protection and coordination.Requirements:• Bachelor’s of Science in Engineering degree (EE preferred) is required and 0-2+ years of prior relevant experience or Masters with less than 2+ years: relevant experience is either working directly with an electric utility or an electric utility consulting company, performing design engineering (EIT/FE credentials or PE license is preferred)• Previous exposure to Voltage Conversion projects, Road Widening Projects, Major Underground Projects, Conductor replacements, and OH to UG conversions• Candidate must provide their own reliable transportation: Local customer/job related travel is anticipated and will be reimbursed at IRS approved ratesNice-to-haves:• Experience providing estimated costs, development of a BOM, calculating the CIAC• Experience with design tools such as Pole Foreman, SOCKET, Spida-Calc• Experience using MicroStation--performing Electrical Distribution design• Experience with design standardsProfessional Attributes• Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy• Collaborative and inclusive of individuals of diverse backgrounds and geographic locations• Positive attitude• Ability to work with limited supervision• Professional demeanorLeidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.PowerDeliveryPDSDLINEOriginal Posting Date:2024-09-17While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $48,100.00 - $86,950.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
10/16/2024
Walled Lake, MI 48390
(23.5 miles)
Description Currently, we have an opportunity for an Associate Distribution Engineer for electric utility design engineering.Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth, including:• Engineer in Training Certificate (EIT)• Professional Engineer License (PE)• Project Management Professional (PMP)• Technical & Non-Technical Training Opportunities• Leadership Opportunities• Mentorship & Training Opportunities• Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain:• NESC expertise• Interface with local clients• Electrical Power Calculations• Interactions with other disciplines (Substation, Protection & Controls, and Civil Structural)• Strategic Development• Expanding a Portfolio of Business• Partnering with a Variety of Utility Clients NationwideIf this sounds like the kind of environment where you can thrive, keep reading!The Associate Engineer will assist in the development of work packages for OH, UG, URD, Make Ready and Street Light projects, and use customer GIS and WMS systems such as GE Smallworld, Bentley Expert Designer and Maximo. The candidate may have the opportunity to experience both office and in-the-field settings at customer sites, and will be trained in customer engineering and construction standards. The associate engineer will perform structural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and calculations of electric demand and fault currents. Candidates will gain experience in coordination of conflicting utilities, and other field engineering design requirements, the assessment and development of design packages for complex cable/conduit projects in dense urban environments, work permit development, easements and ROW applications, and the design of mainline vault medium voltage switchgear, network system design and distribution system protection and coordination.Requirements:• Bachelor’s of Science in Engineering degree (EE preferred) is required and 0-2+ years of prior relevant experience or Masters with less than 2+ years: relevant experience is either working directly with an electric utility or an electric utility consulting company, performing design engineering (EIT/FE credentials or PE license is preferred)• Previous exposure to Voltage Conversion projects, Road Widening Projects, Major Underground Projects, Conductor replacements, and OH to UG conversions• Candidate must provide their own reliable transportation: Local customer/job related travel is anticipated and will be reimbursed at IRS approved ratesNice-to-haves:• Experience providing estimated costs, development of a BOM, calculating the CIAC• Experience with design tools such as Pole Foreman, SOCKET, Spida-Calc• Experience using MicroStation--performing Electrical Distribution design• Experience with design standardsProfessional Attributes• Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy• Collaborative and inclusive of individuals of diverse backgrounds and geographic locations• Positive attitude• Ability to work with limited supervision• Professional demeanorLeidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160 municipals/cooperatives, as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.PowerDeliveryPDSDLINEOriginal Posting Date:2024-09-17While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $48,100.00 - $86,950.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
10/15/2024
Walled Lake, MI 48390
(23.5 miles)
Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business.Leidos is seeking a SeniorDistribution Engineerin Walled Lake, MI who is passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained.As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including:• Professional Engineer License (PE)• Project Management Professional (PMP)• Leadership training & Management Opportunities• Formal Mentorship Programs• Technical Upskilling ProgramsAs a Senior Distribution Engineer, You can expect to:Develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers; You can also expect to assist in the oversight and quality assurance of your team's design workReview work provided by Client and assess requirements of scopes; You will interact frequently with our customerPerform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker.Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met.Conduct root cause analysis of outages and mitigation using engineering principles and designBe comfortable in a field setting: You may also be asked to visit a customer office or participate in fielding activities on an ad hoc basis; This role is hybrid in nature and may also require some of your time to be spent working with internal teams out of our Walled Lake officeCoordinate conflicting utilities and other field engineering design requirements; Assess and develop large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applicationsExperienced engineers may also have the opportunity to lead and train other engineers, and perform QAQC responsibilitiesWhat Sets You Apart (Background Requirements):A minimum of 4 years of relevant electric distribution design engineering experience working with electric utilitiesBachelor of Science in an Engineering, Engineering Technology, or closely related disciplinePrior Experience with distribution design tools such as BOUD, Pole Foreman, Spida-Calc, O-Calc or similarAbility to demonstrate proficiency in NESC standardsProficiency in MS Office (Word, Excel, Outlook, etc.)Ability to utilize a personal vehicle, as customer-related travel is anticipated (Job-related travel will be reimbursed at IRS-approved rates); Candidates must posses valid US driver's licenseWillingness to perform both field and office work; Ability to work in outdoor environmentsAbility to demonstrate strong written, verbal and interpersonal communications skillsYou Might Also Have Some previous experience with:Experience with NESC Standards, ESRI, AutoCAD and/or MicroStation, and GISStructural analysis, guying calcs, cable pulling calcs, coordination of protective devices, and electric demand and fault currents calculations.Work management software and job estimating software.CAD toolsProfessional Attributes that will help you succeed in this role:Collaborative attitude and inclusivity of individuals of diverse backgrounds and geographic locations.Ability to work with limited supervisionPositive attitudeProfessional dress and demeanorAt Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms.At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. Your greatest work is ahead!PDSDLINEPowerDeliveryOriginal Posting Date:2024-09-12While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
9/23/2024
Walled Lake, MI 48390
(23.5 miles)
Description Looking for an opportunity to make an impact We are in search of a Senior Substation Site Civil Engineer to join our diverse and fast-paced Chicago, IL organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing high voltage utility Civil Substation projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.If this sounds like an environment where you can thrive, keep reading!Remote Capabilities Available:- for select candidates located within the client servicing territories!Hybrid Work Schedule: (2-3) days a week in office!Additional Office Location Options:Orlando, FLAtlanta, GACharlotte, NCFramingham, MAWalled Lake, MIChicago, ILHouston, TXPortland, ORBegin your journey of a flourishing and meaningful career. Share your resume with us today!The Challenge:Land development permitting including NPDES, stormwater management, and knowledge of other typical local, state, and/or federal regulations and permit requirementsResearch additional site data through various sourcesSite layout, grading, and drainage designStormwater modeling and designErosion and sediment control designAccess road designUtility coordination and designRetaining wall layout and designDocumentation of all supporting calculationsQuantity take-offsConstruction drawingsConstruction specificationsConstruction observation and field engineeringCoordination and collaboration with other design disciplinesWhat Sets you Apart:B.S. degree in Civil Engineering with four (4+) years of directly applicable civil-site design experienceP.E. license preferredExperience with AutoCAD Civil 3D software (preferred) and/or MicroStation OpenSite Designer software.Experience with Hydraflow, StormWise (ICPR), and various other hydrologic and hydraulic modeling & design programsProficiency using Microsoft Office suite, Bluebeam, Adobe Acrobat, and other general software toolsStrong analytical and technical writing skillsTeam player with ability to communicate effectively with clients and staffAble to execute projects and handle clients successfully with limited supervisionWilling to travel, up to 25%Authorized to work in U.S.Grow with us! Through training, teamwork, and exposure to challenging technical work, let Leidos show you how to accelerate your career path. Apply today!PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2024-08-26While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
10/19/2024
Walled Lake, MI 48390
(23.5 miles)
Description Looking for an opportunity to make an impact We are in search of a Senior Substation Civil/Structural Engineer to join our diverse and fast-paced Chicago, IL organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing high voltage utility Civil Substation projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.If this sounds like an environment where you can thrive, keep reading!Remote Capabilities Availablefor select candidates within the client servicing territories!Hybrid Work Schedule: (2-3) days a week in office!Additional Location Options:Portland, ORWalled Lake , MIHouston, TXOrlando, FLBegin your journey of a flourishing and meaningful career. Share your resume with us today!The Challenge:The candidate must have a strong educational background in design of steel structures, concrete structures, geotechnical engineering, and foundations.Experience reviewing substation structure design, rigid bus design, foundation design, oil spill containment design, retaining walls, masonry control shelters, and fire-walls is required.This position will consist of performing design reviews of the aforementioned civil/structural design components in support of the development of bid/construction packages for substation projects.Candidate will primarily function as a senior engineer performing design reviews on a regular basis, as well as developing junior staff members, and contributing to bids and proposal development.This role will also consist of taking a responsible engineer role on main client projects, overseeing the work and ensuring quality control on design packages.Site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events.Experience in front-facing client operations such as lunch and learns, and kick-off meetings if preferred.Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations.This position will be a senior member of a design team comprised of engineers, designers, and drafting technicians.What sets you apart:Bachelors of Science (BS) or Masters (MS) degree in Civil-Structural Engineering with 5+ years of related experiencePE Licensure preferredExperience with Microsoft Word/Excel/Powerpoint & MATHCAD softwareExperience with STAAD.Pro, RISA 3D, FAD Tools, SAFE, SAG10, and LPile softwareFamiliarity with AutoCAD and MicroStationStrong analytical and technical writing skillsTeam player with ability to communicate with clients and staffWillingness to travel, up to 25%PDSTLINEPowerDeliveryOriginal Posting Date:2024-08-23While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $68,900.00 - $124,550.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
Full Time
10/19/2024
Walled Lake, MI 48390
(23.5 miles)
Description Looking for an opportunity to make an impact We are in search of a Junior Substation Civil/Structural Engineer to join our diverse and fast-paced Chicago, IL organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing high voltage utility Civil Substation projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.Hybrid Work Schedule: (2-3) days a week in office!Additional Location Options:Portland, ORWalled Lake , MIHouston, TXOrlando, FLBegin your journey of a flourishing and meaningful career. Share your resume with us today!Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamThe Challenge:The candidate must have a strong educational background in design of steel structures, concrete structures, geotechnical engineering, and foundations.Experience with substation structure design, rigid bus design, foundation design, site development, oil spill containment design, and design of retaining walls, design of masonry control shelters, and fire-walls is a plus. This position will be direct design of the civil/structural design components in support of the development of bid/construction packages for substation projects.Candidate will primarily perform design calculations and develop construction grade engineering design drawings on a regular basis, under the supervision of a licensed civil engineer.Site-visits to client substation facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events.Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations.This position will be a member of a design team comprised of engineers, designers, and drafting technicians.What Sets you Apart:Bachelors of Science (BS) degree in Civil-Structural EngineeringEIT PreferredExperience with Microsoft Word/Excel/Powerpoint & Mathcad softwareExperience with STAAD.Pro, FAD, SAFE, SAG10, and LPile software, (preferred)Familiarity with AutoCAD, Microstation and Civil 3D software preferredStrong analytical and technical writing skillsTeam player with ability to communicate with clients and staffPDSTLINEPowerDeliveryOriginal Posting Date:2024-08-23While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $48,100.00 - $86,950.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.