Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

HPC-Industrial, powered by Clean Harbors, inMonroe, MIis looking for aCDL-Class B Equipment Operatorto join their safety conscious team! TheCDL-Class B Equipment Operatoris responsible for the transportation of hazardous waste (tank, van, and/or roll-off dump truck) from a generator/facility to a Clean Harbors facility and/or an outside disposal facility adhering to Department of Transportation (DOT) and hazardous waste regulations. The CDL-Class B Operatorserves as a representative ofHPC-Industrialin creating a continuous working relationship with clients/customers. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial Health and Safety is our #1 priority and we live it 3-6-5!Competitive wagesComprehensive health benefits coverage after 30 days of full-time employmentGroup 401K with company matching componentOpportunities for growth and development for all the stages of your careerGenerous paid time off, company paid training and tuition reimbursementPositive and safe work environmentsEnsures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times.Ensure proper loading and unloading of hazardous waste/non-hazardous waste (i.e., compatibility of liquid to tank, etc.); Adhere to weight limits and ensure proper utilization of Company equipment.Responsible for the proper placarding of vehicle to meet Company and Department of Transportation (DOT) requirements/regulations.Responsible for maintaining daily logs, worksheets timecard, expense reports, dispatch & trip reports and vehicle inspection reports.Comply with Company policies & procedures and Health & Safety procedures, Department of Transportation (DOT), Hazardous Materials/Waste (HAZMAT) and RCRA requirements/regulations.Adhere to assigned milk run schedules of pick-ups and drop-offs.Communicate regularly with Coordinators regarding daily times and demurrage.Maintain a professional appearance (by wearing Company supplied uniforms and ID badges, which are required, per Company policy) and courteous demeanor with internal and external customers.Maintain and clean assigned Company equipment as well as ensure equipment is mechanically sound and in good working order.Because of the emergency response and operational nature of the position, a continuing condition of employment is that the applicant/candidate acknowledges and agrees to be on-call 24 hours a day, 7 days a week, 365 days a year and on occasion will require work during seek-ends and holidays.Responsible for keeping your training record up to date with all DOT /OSHA and Company required trainingPerforms other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business.Other Duties as Assigned1-3 Years, verifiable vacuum truck service within the commercial trucking industry.Possess Hazardous Waste and Tank EndorsementsPossess a Valid CDL Class A or B with X (Haz-mat and Tanker) endorsement and an acceptable driving record.Able to use Mobile ComputerAble to work with little if no direct supervision and an aptitude to complete assigned workKnowledge of principles and methods for moving fluids in the vacuum truck services in the oilfield industry.Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.Knowledge of machines and tools, including their designs, uses and maintenance.Strong knowledge in the operation of equipment used in commercial transportation.Smartphone required for Electronic Logging Device.Complete understanding of DOT’s safety program & standards.Possess excellent communications and human relations skills.Mechanical aptitude and experience troubleshooting transportation equipment is preferred. Educational Requirements: High school diploma/GED or equivalent experience. What does it take to work for HPC-Industrial Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs;Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations;Valid driver’s license, CDL Class A or B and other requirements of company’s driving policy required when driving company vehicle or using personal vehicle on company business;Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers;Experience operating a vacuum truck. Smartphone required for Electronic Logging Device;Working knowledge of operating equipment used in wet and dry vacuums. About HPC-Industrial HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors.HPC-Industrialoffers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. HPC-Industrial is a Military & Veteran friendly company. *HPC

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.At least two (2) experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.#appcastMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.

Company: Gerber Collision & GlassWELCOME TO GERBER COLLISION & GLASSOur Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best!We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us.Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans.Job Description:The Auto Body Technician’s primary responsibility and accountability includes providing an exceptional and successful customer experience through the meticulous assessment and quality repair of each customer’s vehicle to restore it back to pre-accident condition. The Auto Body Technician thoroughly disassembles, repairs, and reassembles each vehicle while playing a pivotal role to our company’s promise of speed, quality and customer excellence. The Auto Body Technician works in alignment with all team members in achieving the repair facilities KPIs and is committed to being a dedicated Brand Ambassador of The Boyd Group at all times.Key Job ResponsibilitiesEnsure consistent execution of WOW (Wow Operating Way) plan.Plans the repair work that is necessary and prepares cost estimates for customers. Uses various tools such as cutting guns, plasma cutters, hydraulic jacks, hammers, and pliers to repair sections of a vehicle.Hammers out dents, dimples, and other minor body damage if possible; mixes and applies filler resins to repair dents when other methods are not feasible.Realigns car chassis and frames to repair structural damage.Removes damaged sections of vehicles and replaces them with new or aftermarket parts. Replaces or repairs glass and windshields as needed.Replaces or repairs interior parts as needed.Welds and otherwise attaches or fits parts into place and Prepares and repaints vehicles with factory-specified paint or agreed-upon equivalent.Attempts to complete work orders within labor time guidelines. Ensures all work has been executed correctly by inspecting vehicles after repair.Performs other related duties as assigned. Education and/or Experience RequiredHigh school diploma or equivalent required.Successful completion of technical school program OR a 3-year apprenticeship as an auto body repairer.Required Skills/Abilities Ability to read job orders and work with very little supervision.Ability to work with other repairers within an auto body shop.Thorough understanding of methods and procedures to repair vehicle bodies.Thorough understanding of how to use tools required for the trade.Other RequirementsMust be able to work safely in a noisy area with many odors present.Must be able to lift up to 30 pounds at times.Must be able to visually inspect vehicle damage in a variety of weather conditions.Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Benefits That Drive Your SuccessGerber offers the comprehensive benefits you expect from an industry leader, including:Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysContinuing Education OpportunitiesGerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.About UsGerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit gerbercareers.com to learn more about our company.

The Diesel and CNG Tractor Mechanic is responsible for repairing, maintaining and troubleshooting for all fleet equipment including tractor Compressed Natural Gas (CNG) and diesel engines (fuel systems and electrical systems), 53' trailers, pneumatic brakes systems, engine diagnostics, and CNG/diesel engine drive trains. The Tractor / Trailer Mechanic will perform preventative maintenance inspections and comply with DOT regulations. Inspect and repair tractor and trailer under carriage components to include shocks, wheel bearings, air suspension components and front-end assemblies. Diagnose and repair CNG and diesel engine failures to include fuel systems, electrical systems, DEF systems and mechanical system malfunctions.

Are you looking for an opportunity to work in the dynamic world of retail merchandising Retail Odyssey is currently seeking Retail Reset Merchandisers to join our team. As a Retail Odyssey Merchandiser, you will play a crucial role in enhancing the shopping experience for customers within the nationwide Kroger family of brands. You will utilize your basic merchandising skills to reset shelves, tag products, build eye-catching displays, ensure product facing, and rotate stock efficiently. Your keen eye for detail will be essential in maintaining the visual appeal of the grocery stores, ensuring products are well-presented, and displays are aesthetically pleasing.What you get:Competitive wage; $14.00 per hourEarly morning weekday hours, allowing you to maintain a healthy work-life balance with no weekend commitmentsAdditional hours may be available upon requestPaid training, equipping you with the necessary skills and knowledge to excel in your rolePaid mileage and travel reimbursement when applicableWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and online discountsNow, about you:You’re18years or olderHave reliable transportation and a valid driver’s license You enjoy physical work of moving, bending, standing, squatting and can lift up to 50 lbs. Are open to visiting multiple stores in a weekHave excellent communication skills to effectively interact with team members, store staff, and customersClick video link hereto see our team in action.If you are passionate about retail, have a great eye for detail, and enjoy creating visually appealing displays, we invite you to apply to this opportunity. Join us at Retail Odyssey and be a part of a dedicated team committed to delivering exceptional merchandising services to our clients’ customers.Click Apply Now to start your rewarding journey with Retail Odyssey!

As a family company, we serve people and communities. When you work at Meijer, you’re provided with career and community opportunities centered around leadership, personal growth and development. Consider joining our family – take care of your career and your community!Meijer RewardsWeekly pay Scheduling flexibilityPaid parental leavePaid education assistanceTeam member discount Development programs for advancement and career growthPlease review the job profile below and apply today!Responsible for Preventative Maintenance (PM) and timely work order completion for complex. Perform routine and emergency maintenance (major and minor) of utilities systems in a multi-craft environment, including PLC, instrumentation, mechanical and equipment repair..What You'll be Doing:Perform routine chemical testing, making necessary operational adjustments to maintain proper operating parameters for cooling tower and boiling water.Monitor complex heating/ventilation system and adjust controls for proper operation.Provide 24/7 automated process monitoring and take appropriate action as needed.Works with the Maintenance Planner to maintain supplies through ordering and receiving chemicals, record usage and interaction with appropriate vendors.Maintain manufacturing and complex equipment by performing Preventative (PM), Predictive (PdM) and Corrective Maintenance to ensure maximum life expectancy of machinery.Notify appropriate leadership of unsafe, damaged work equipment and make recommendations regarding repair or replacement as needed.Suggest design improvements on existing and new equipment and systems.May provide training and direction to other technicians and operators as needed.Partners with Maintenance Master/Manager to review production goals and schedules as well as maintenance requests to plant or modify maintenance activities.Perform other duties as requested by Maintenance Master/Manager.Practices 200% safety accountability in self and others.What You Bring with You (Qualifications):HS Diploma/GED required.Associates degree or certification in a technical field preferred.Mechatronics Certifications for Levels 1-7 completed.5-7 years of hands-on manufacturing maintenance experience, preferably in a food manufacturing setting.Familiarity with standard mechanical and electrical component maintenance and repair practices; knowledge of and skill with preventative maintenance.Skilled and certified in various PLC programming languages.Effective verbal and written communication skills, with the ability to convey technical information to a non-technical audience.Knowledge and experience with Safe Quality Foods (SQF), Good Manufacturing Practices (GMPs), Lock Out/Tag Out (LOTO) and Lean Manufacturing process.Ability to support and work with engineering on projects, equipment design, layout or re-design.Working knowledge of standard mechanical component maintenance and repair practices.Familiar with office technology tools (i.e. MS Office).Able to read and interpret blueprints and schematics.Ability to operate basic machining equipment (lathe, mill, drill press).Ability to work collaboratively with Meijer leadership.Understanding computer theory, programmable logic controls (PLC) and experience with Variable Frequency Drives (VFDs).

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional well-being.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offerCompetitive pay.Paid vacation, holidays, and sick time.Comprehensive benefits package, including retirement savings plan, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.What you will doWe are looking for skilled HVAC Service Journeymen in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of 5 years of HVAC service experience, with knowledge of maintenance procedures and troubleshooting.Howyou will do itYou will be assigned primary service accounts and responsible for executing contract maintenance visits, inspections, site assessments, service requests, and recommending necessary upgrades or repairs to prolong the equipment life cycle of our customer's equipment. You will establish & maintain a positive relationship with customers, vendors, and co-workers through effective oral and written communication skills via phone, computer, and face-to-face. You will be expected to provide quote estimates for labor & material repairs and upgrades as needed.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing, and repairing equipment and systems at the customer’s location.You will be required to use cutting-edge software and technology, along with a variety of hand tools, and rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment.You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company-issued and procured assets by recording use, wear, and conditions.You will be expected to work as part of a team that is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotation since we are a 24/7 service company.What we look forRequiredRequires HVAC Journeyman statusOperating knowledge of Microsoft Office software and working proficiency with handheld computers (i.e. Smartphone, iPad)Adherence to company safety program.Valid driver's license, appropriate licenses to work with refrigerants, natural gas and electricalGood verbal and written communication skillsMust be able to be on call nights and weekends on a rotating basisA valid Class 5driver'slicense is requiredPreferredMore than 5 years of commercial, industrial, and/or institutional experience.JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.#LI-Onsite

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Compressor Repairer Technicians will be responsible for installing, maintaining, removing, repairing, and connecting and disconnecting all process systems associated with the operation of the Energy Center. These processes may include refrigeration machines, industrial air conditioning compressors, air compressors, air dryers, cooling tower fans, pumps, motors, reverse osmosis systems, actuators, and heat exchangers. Compressor Repairers also troubleshoot refrigeration controls, and perform other work related to their trade as may be required on Energy Center equipment. Job responsibilities include but not limited to: Maintain and repair all rotary, screw, centrifugal, and turbine type compressors at the Energy Center including compressed air and refrigerant machinesRun air compressor surge tests periodically as per manufacturers' recommendationsLeak test and repair air compressors, cooling towers and refrigerant machines as necessaryMaintain, test, and repair condensate traps on air compressors as necessaryMaintain and repair cooling tower fans including control valves, fill distribution systems, tower water pumps, tower water filtrations systems, and chemical feed systemsMaintain and repair all heat exchangers, coolers, condensers, refrigeration and air conditioning equipment, associated with the energy center operationsEvacuate air conditioning and refrigeration machine charges, leak test, repair refrigerant leaks, replace filter driers, change refrigerant oil, and all other routine/seasonal maintenanceMaintain and repair all piping associated with the operation of the Energy CenterMaintain and repair all pumping systems in the Energy Center including tower water pumps, primary and secondary chilled water pumps, RO water pumps, building sump pumps, chemical feed pumps, city water booster pumps, and compressor water closed loop pumpsPerform pump and motor alignmentMaintain and calibrate refrigerant monitoring systemsMaintain and repair actuating control valves for all chilled water and compressed air piping systems including periodic zero and span adjustments

What you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization.How you will do itLoading Johnson Controls field and network level controller software.Performing commissioning and system diagnostics for all levels of system controllers as well as enddevices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.What we look for:Required -Strong understanding of HVAC systems, sequence and applicationsDemonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Attention to detail.Good communication and listening skills

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

We are searching for a skilled and meticulous Laboratory Automobile Mechanic to join our team at our world-class proving grounds facility. In this role, you will: Play a vital role in supporting the testing and evaluation of vehiclesPrepare vehicles according to established proceduresConduct diagnostic testing and troubleshooting of issues using specialized tools and equipment The Temporary Automotive Test Technician - Impact Lab Mechanic will: Use CAN diagnostic tools (CDA) to check-in vehicles and identify issues and flash software prior to testingPerform repairs and modifications to vehicles as needed to address testing needsConduct tire mounting, balancing, and road force testingAssist engineers with data acquisition and analysis during testingDocument test procedures, findings, and repairs in a clear and concise mannerMaintain a clean and organized work area, adhering to all safety protocolsCollaborate effectively with engineers, technicians, and other team members

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to low voltage BAS controls components and mechanical systems ( Chiller Plants, Boiler Plants, Air Handlers, Vav Boxes).Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Assist sales team with development of project scopes including competitor site retrofits.Be part of an expanding team of the best technicians in the industry while you build career with a first class global organization.Grow your knowledge of the Metasys product line through continuous in classroom, online and job site training.Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do itFollows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.Loading Johnson Controls field and network level controller software.Sell and perform upgrades/modifications to system software and field controllers.Performing commissioning and system diagnostics for BAS system field controllers and devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Setup and program energy saving sequences into the BAS.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.Provide recommendations and solutions to ensure facility is running efficiently to include improvement opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or 2+ years experience in servicing electronic and/or mechanical systems in the HVAC industry.Strong understanding of HVAC systems, sequence and applications.Demonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Programming and startup knowledge of competitor control systems a plus but not required. (Tridium, Siemens, Trane)Attention to detail.Good communication and listening skills

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

The SBU Temporary Driver Mechanic performs vehicle mechanical work beginning with basic assembly and/or removal of parts, minor repairs such as replacing fuel systems, unit connections and other components. Duties increase with time and experience on the job. Most advanced work may include fabricating experimental parts and test fixtures and working from blueprints/drawings. Other responsibilities include driving test vehicles at various speeds on varying road conditions. Weekend overtime is required for this position.

Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning and preventative maintenance as it is related to low voltage BAS controls components and mechanical systems ( Chiller Plants, Boiler Plants, Air Handlers, Vav Boxes).Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Assist sales team with development of project scopes including competitor site retrofits.Be part of an expanding team of the best technicians in the industry while you build career with a first class global organization.Grow your knowledge of the Metasys product line through continuous in classroom, online and job site training.Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do itFollows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.Loading Johnson Controls field and network level controller software.Sell and perform upgrades/modifications to system software and field controllers.Performing commissioning and system diagnostics for BAS system field controllers and devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Setup and program energy saving sequences into the BAS.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.Provide recommendations and solutions to ensure facility is running efficiently to include improvement opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or 2+ years experience in servicing electronic and/or mechanical systems in the HVAC industry.Strong understanding of HVAC systems, sequence and applications.Demonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Programming and startup knowledge of competitor control systems a plus but not required. (Tridium, Siemens, Trane)Attention to detail.Good communication and listening skills

Be part of the future!We are one team, dedicated to working collaboratively to createthe purposefulsolutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, andwe’llgive you the space and opportunities to grow and succeed.We are committed tomakea difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAndMore!What you will doWe are looking for a skilled HVAC systems serviceman who have worked in light commercial and/or heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.How will you do itWe provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Servicemen must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination as to identify special skills. Scope of work shall be limited to commercial HVACR service. ServicemenwillPerform maintenance, repair and replacement services on commercial heating and cooling systems, including RTU’s, Boilers, AHU’s, Pumps and Split Systems.What we look forRequiredHigh School Diploma or equivalent.Two (5) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredFive (5) years of Commercial and or industrial work experience in the HVAC industryRefrigeration Certification preferredEPA Universal Refrigerant Certification

Be part of the future!We are one team, dedicated to working collaboratively to createthe purposefulsolutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, andwe’llgive you the space and opportunities to grow and succeed.We are committed tomakea difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAndMore!What you will doDo you have HVAC experience We are looking for skilled Serviceman who have worked in residential, light commercial and/or heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work. We will equip you with tools and a vehicle to perform your job at the highest standard.Servicemen must have practical working experience in residential, light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service.Possibility of being accepted into the Local union apprenticeship after at least 6 Months of working hours with Lead Journeyman and Manager.)Be able to work in conditions that may be dirty and or longer hours.What we look forRequired:Perform maintenance, repair, and replacement services on light commercial heating and cooling systems.HVAC systems maintenance.Residential, light commercial, industrial and/or commercial work experience.High School Diploma or equivalent.Preferred:EPA Refrigeration certification a plus.

Job DescriptionWhat you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of 5 years’ chiller experience, with knowledge of maintenance procedures, trouble shooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs to prolong the equipment life cycle of our customersequipment You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face toface You will be expected to provide quote estimates for labor & material repairs and upgrades asneeded You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’slocation You will be required to use cutting edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repairequipment You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear andconditions You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnightstaysYou will be added to our on-call rotation, since we are a 24/7 servicecompanyQualifications - What we look for Required:Requires Mechanical Journeyman statusValid Red Seal Refrigeration and A/C certificationValid ODS certificationMore than 5 years of commercial, industrial, and/or institutional experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Operating knowledge of Microsoft office software and working proficiency with hand-held computer (i.e.Smartphone, iPad)Adherence to company safety programValid driver's license, appropriate licenses to work with refrigerants, boiler and steam operational & service knowledgeGood verbal and written communicationskillsMust be able to be on call nights and weekends on a rotatingbasis.

Be part of the future!We are one team, dedicated to working collaboratively to createthe purposefulsolutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, andwe’llgive you the space and opportunities to grow and succeed.We are committed tomakea difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/VisioninsuranceHealth Savings Account (HAS)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAndMore!What you will doUnder general direction, responsible for the service & repair, design, configuration, and operation of complete HVAC building control systems and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the customers and JCI goals. Accountable for quality, timeliness and efficiency of Service & repair and designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants,Sales and Service team and subcontractors. Coordinates required day-to-day activities of field technician team and plans monthly technician routes. Analyzes team performance and recommends changes to ensure profitability, safety, and client satisfaction. Maintains customer satisfaction while balancing financial goals. Ensures safety compliance.How you will do itSupervises and provides leadership for assigned Teams. Ensure developmental plans are in place.Leads execution efforts of assigned business. Ensures consistency of delivery systems. Monitors and tracks the business plans.Collaborate with sales to ensure all sales opportunities are supported including linkage to installation opportunities.Advances potential market opportunities to the attention of the appropriate branch or region resource for strategic direction.Ensures that serviced account portfolios achieve growth, proper profit levels and customer satisfaction.Recommends and supports staffing requirements for the assigned business.Serves as a communication channel to share the standard methodology strategies and results enables SSNA vision.Implements plans to comply, and monitors standards for HVAC operations. Audits the effectiveness of operations and makes changes to improve performance.Ensures that contractual obligations are completed, and customer satisfaction is achieved.Drives service and installation operational review meetings, reviewing bids and estimates for accuracy.Effectively uses branch personnel and management and deployment of overall resources.Analyzes operations processes and provides recommendations for improvements.Drives other managerial responsibilities, i.e., performance reviews and acquisitions consistent with established business strategy.Recruits, hires and retains operational staff. Prepares and delivers clear performance expectations, performance reviews, and development plans for direct reports teaming with the appropriate matrix functional manager. Ensures a consistent level of coaching, which includes monthly one on one(s), operational and financial reviews.Works with team leaders to ensure proper workforce and skill levels for the successful and profitable execution of the business.Performs other duties related to customer satisfaction, deployment of critical initiatives to teams, development and maintenance of team business plans and account management of service customers.Designs, configures and services technically complex building control systems for the customers facility. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs necessary to operate the system per the customer's facility requirements.Coordinates and creates necessary drawings and equipment schedules for submittals, service and/or installation.Selects, orders, and tracks the delivery of materials for assigned jobs.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.Provides field change information to the team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with sales and service operations. Performs value engineering to provide cost effective results while maintaining customer satisfaction.May provide work direction to Service Controls Technicians, Senior I, Senior II Controls Technicians and Engineer I, Engineer II and Engineer III.Adheres to safety standards. High degree of regard to employee and subcontractor safetyWhat we look forMinimum of 10 years of experience with programming, installing and/or commissioning controls systems including system-level controllers.Demonstrated knowledge of the construction, service mechanical, electrical, or HVAC service industry.Demonstrated knowledge and understanding of mechanical drawings, electrical wiring diagrams, control theory, automatic temperature controls, building automation systems and other building subsystems.Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., Modbus, LON, BACnet, etc.).Ability to relate technical knowledge to a non-technical audience.Demonstrated advanced computer skills required, particularly computer-related drafting tools, such as Visio.PreferredBachelor's degree in engineering, or an associate degree in a related technical field with ten years of relevant work experience required.Understanding of IP networking for building automation systems.