FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($30,678.00- $56,974.00)$16.68-$27.00 Target Bonus: 5.0% Req ID:25731 Job ResponsibilitiesBuild Mechanical sub-assemblies, final assemblies and any other Mechanical task for the job.Follow safety procedures/ training as outlined and identified by Fori Automation management, MIOSHA, and OSHA.Complete as required in process QC check sheets.Complete as required QC audits.Assure good craftsmanship on jobs that are being built.Follow good housekeeping practices.Take direction from Leader and/or SupervisorProvide feedback on job status to Mechanical Assembly Leader.Know and understand due dates for jobs and schedule work accordingly.Follow-up with supervisor on daily basis to report progress of job(s) being worked on.Assist in disassembly, packing and loading of machines for shipment.Fill-in where required for absences.Order material and follow-up with receiving when required.Assist in start-up/de-bug of equipment.Recommend as appropriate work methods and/or materials that will improve existing designs.Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations.Read and interpret build prints. Work with Mechanical Engineers and build Leaders to correct any problems with design of the machine/controls.Recommend, initiate, and follow-up as needed on engineering changes and document according to ECO procedures.Work on continuous improvement projects as needed.Support special assignments as needed.Provide training and assistance to new employees.Job RequirementsHigh School Diploma required5 years experience as a Machine BuilderLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $14.00 per hourGrowth opportunities abound – We promote from withinNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skillsHave the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

Starting Pay: Up to $16.00/hourCompany: Chick-fil-A Twelve OaksVoted as America’s favorite & one of the fastest-growing quick-service restaurants in the countryIndustry leader in Customer Service & HospitalityFaith-based, individually owned & operated companyChick-fil-A is the fastest growing Quick Service Restaurant in the nationChick-fil-A has the highest customer satisfaction scores for 10 consecutive yearsChick-fil-A is on Forbes Lists for: Best Customer Service (2025), Customer Experience All Stars (2024), America's Dream Employers (2025), Best Brands For Social Impact (2023), Best Employers for Women (2023), America's Best Large Employers (2023), The Halo 100 (2022)Chick-fil-A has awarded $191 million in team member scholarships since 1973, with $26 million total awarded to 14,000+ winners in 2024Chick-fil-A Twelve Oaks's Commitment To YouHere at Chick-fil-A Twelve Oaks our goal is to have a positive impact in Novi and the surrounding areas by demonstrating care in all that we do.Value and Appreciate EmployeesFlexible SchedulesFree FoodAccess to ScholarshipsSundays offPaid trainingCareer Advancement OpportunitiesContributions to Vision, Dental and Life Insurance* (for Full-Time employees)OpportunityAt Chick-fil-A Twelve Oaks, we care for our team and community. We passionately pursue excellence and strive to make a positive impact through delicious food and hospitality. We are searching for those that positively influence people around them and thrive in an environment of service and hospitality. Are you looking to challenge yourself and grow within a great team atmosphere Let’s get started.Position TypeFull-TimeDay or Evening shiftsOpen availability is highly preferredYour ImpactParticipate in a fast-paced, upbeat environment preparing safe, tasty food with state of the art equipmentMaintain a clean work environment with high standards and expectationsJoin a team of over 90+ Team Members that focuses on growth, personal and professional developmentUpper management and leadership opportunities including Team Leader, Assistant Director and DirectorEnhance guest experience with attentive service, personalized interactions, and understanding of guests’ needsBackground ProfileMust be 16 or olderAbility to work at a quick, yet efficient and thorough pace--hustle is a must!Team-oriented, adaptable, dependable, and strong work ethicPositive attitude, coachableAbility to communicate effectively with guests and team membersAPPLY NOWand you will be contactedASAP.REQUIREMENTSMust be 16 or olderAbility to work at a quick, yet efficient and thorough pace--hustle is a must!Team-oriented, adaptable, dependable, and strong work ethicPositive attitude, coachableAbility to communicate effectively with guests and team membersOpen availability highly preferredMust be available at least 2 Saturdays a monthAt Chick-fil-A, the Team Member role is more than just a job, it's an opportunity. In addition to working directly for an independent Operator, team members gain life experience that goes far beyond just serving a great product in a friendly environment. Chick-fil-A is a great opportunity for people of all ages and backgrounds, and no experience is necessary. As a BOH Team Member, you will support the kitchen team, assemble food & drink orders quickly and accurately, and ensure each guest leaves with a smile. We are looking for friendly, enthusiastic people who enjoy serving customers. We will teach you everything else you need to know!

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: ConGlobal is hiring immediately for a key position within our global supply chain. No experience necessary, we offer paid training, great benefits, competitive pay and opportunities for future career growth. The starting pay is $18.82 - $20.93!We are located 2101 Hill Avenue Toledo, Ohio 43607 United States Responsibilities: Intermodal Equipment Operators/Terminal Operators assist intermodal yards in loading, unloading and moving shipping containers utilizing various tools and equipment. Opportunities exist to drive hostlers and/or move containers with cranes, top loaders and side loaders. Qualifications: Valid driver’s licenseAbility to always follow safety requirements and practicesReliable, punctual and a strong work ethicAbility to work outdoors in all weather conditionsAbility to lift up to 50lbsAbility to climb ladders and stairs both off and on railcarsMust pass a pre-employment background verification, physical and drug screeningThe Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.Open availabilityWe offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

We are currently seeking a highly motivated and experienced Landscape Equipment and Fleet Mechanic Assistant. The Mechanic Assistant will repair and perform preventative maintenance on all company equipment.What would my responsibilities be · Perform preventative maintenance and service a wide variety of landscape power equipment. This will include commercial mowers, 2 cycle equipment, utility vehicles, trailers and trucks.· Operate in a shop where an inventory of spare parts and supplies are maintained.· Operate safely and maintain shop in a clean, orderly manner.· Contribute to our safety culture by wearing assigned Personal Protective --Equipment (“PPE”).Why Join Yellowstone · Competitive hourly pay, paid weekly· Benefits package including health, dental and vision insurance, 401k with a company match· Industry-leading safety programs· Company provided safety gear· Equipped with optimal and most professional equipment· High profile customers, worksites, and landscape results -A company that values and appreciates YOURequirements· Legal authorization to work in the United States· A professional with a minimum of 2+ years repair experience with mowers, small engines, 2 cycle equipment, and utility vehicles.· Must possess a strong mechanical skill-set including knowledge of basic electrical systems, hydraulic systems, mower technology and engines, both gasoline and diesel.· Basic automotive repair experience.· Must have own tools.· Must have reliable transportation to the Branch or first job site· Safe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

Overview: CONSIDER YOUR CAREER WITH US!STATE OF ART DEALERSHIP! INDUSTRY LEADING PAY, PLUS BONUSES!Up to $10K Sign-On Bonus!Mercedes-Benz of Augustais part of the fast-growing Group 1 Automotive, a leader in automotive retail and service. We are growing and need to add Quality Service Technicians,to join ourQuality Mercedes-Benz Dealership. We are looking for Entry Level to Experienced.Our Service Technicians should be passionate about customer service, take pride in their work, an enjoy being part of a winning team that cares about their employees.What We Offer...Astate-of-the-art dealershipwith modern facilitiesClimate-controlled shop (air-conditioned and heated) for a comfortable work environmentIndustry-leading paybased on experience, plus performance bonusesApositive and collaborative work environmentOngoing training and career growth opportunitiesManufacturer and Group 1 recognition programsComprehensive benefits package, including health, dental, and vision insuranceLife and Disability Insurance401(k) with company matchto support your futurePaid Time-offExclusive employee benefits, including:Employee vehicle purchase programEmployee stock purchase planSchool reimbursement programfor qualifying candidatesTool assistance programfor qualifying candidatesRelocation assistancefor qualifying candidatesYou needNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance is a plus!A Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on our ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s LicenseGroup 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our company values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*We are an Equal Employment Opportunity Employer

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job DescriptionSeeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B or A Commercial Driver's License (CDL) - Must obtain within a year of hire.Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.066 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range:$22.51-$29.00 Target Bonus: 5.0% Req ID:26396Job ResponsibilitiesTake direction from Leader and/or SupervisorProvide training and assistance to new employees.Provide feedback on job status to Electric/Pneumatic Assembly Supervisor.Assist in start-up/de-bug of equipment.Assure good craftsmanship on jobs that are being built.Follow and enforce good housekeeping practices with all department personnel.Know and understand due dates for jobs and schedule work accordingly.Work with Controls Engineers to correct any problems with design of the machine/controls.Recommend as appropriate work methods and/or materials that will improve existing designs.Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations.Follow-up with supervisor on daily basis to report progress of job(s) being worked on..Recommend, initiate, or follow-up on engineering changes and document according to procedure(s).Assist in packing and loading of machines for shipment.Fill-in where required for absences.Order material and follow-up with Receiving when required.Must know how to read and interpret build prints.Job RequirementsEducation: High School Diploma required. Journeyman’s card or Journeyman status preferredExperience: 5 years minimum experience as industrial pipefitterLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: ConGlobal is hiring immediately for a key position within our global supply chain. We offer great benefits, competitive pay and opportunities for future career growth. The starting pay is $28.98 - $31.05!We are located 2101 Hill Avenue Toledo, Ohio 43607 United States Responsibilities: Overview:We are seeking a skilled and dependable Heavy-Duty Equipment Mechanic to join our team. In this role, you will be responsible for inspecting, diagnosing, and repairing heavy-duty lift equipment at the railyard. This includes performing mechanical maintenance and repairs on side loaders (loaded container handlers), hostlers (semi tractors), forklifts, and various types of support equipment.Responsibilities:Inspect, assess, and repair heavy-duty equipment, including lift trucks and support vehiclesPerform routine and preventive maintenance on side loaders, hostlers, forklifts, and related machineryTroubleshoot and repair hydraulic systems including pumps, valves, motors, filters, and hosesConduct driveline repairs on components such as axles, bearings, rings, and other related partsMaintain accurate records of repairs and inspectionsOperate safely in a fast-paced, outdoor railyard environment and adhere to all company safety protocolsCollaborate with team members and supervisors to ensure timely and efficient repairs Qualifications: 1–3 years of experience as a heavy equipment mechanic or service technicianPrevious crane mechanic experience is a plusStrong working knowledge of hydraulic systems (pumps, valves, motors, filters, and hoses)Driveline component repair experience (axles, bearings, ring, etc.)Ability to work in various weather conditionsAbility to work in a safety focused environmentAbility to lift 50lbsMust have a Valid Driver’s LicenseMust pass a pre-employment background verification, physical and drug screening.The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen.We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

We are seeking experiencedCrew Leaders to work safely in the field for our Maintenance division.You will be a working team member who oversees all aspects of a crew from start to completion. What would my responsibilities be Supervise all lawn maintenance service activities of the crew,ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely.Complete a pre-trip inspection report each day.Coordinate with branch management, customers, and employees as needed.Use landscaping tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews.Why Join Yellowstone Competitive hourly pay,paid weeklyBenefits package including health, dental and vision insurance, 401k with a company matchIndustry-leading safety programsCompany provided safety gearEquipped with optimal and most professional equipmentHigh profile customers, worksites, and landscape results -A company that values and appreciates YOURequirementsLegal authorization to work in the United StatesExperience managing a crew consisting of laborers providing landscaping or related servicesMust have reliable transportation to the Branch or first job siteSafe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) requiredStrong English communication skills. Spanish a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range:$17.36-$28 Target Bonus: 5.0% Req ID:26240Job ResponsibilitiesThis is a Night Shift Position.Set up Vertical Haas Machines according to job specifications and blueprints.Operate Vertical Haas Machines to perform machining operations such as milling, drilling, and tapping.Monitor machine operations to ensure parts are produced within tolerance and meet quality standards.Perform routine maintenance on machines to ensure optimal performance and minimize downtime.Troubleshoot machine issues and make necessary adjustments to maintain production efficiency.Inspect finished parts for defects and ensure compliance with quality standards.Follow safety procedures and guidelines to prevent accidents and injuries in the workplace.Maintain a clean and organized work environment.Job Requirements-High school diploma or equivalent; technical certification or vocational training is a plus.Experience operating Vertical Haas Machines in a manufacturing environment.Experience with Haas control systems.Ability to program using G-code.Strong understanding of machining principles and practices.Proficiency in reading blueprints and technical drawings.Ability to use precision measuring tools such as calipers, micrometers, and gauges.Excellent problem-solving skills and attention to detail.Ability to work independently and as part of a team.Good communication skills and the ability to follow instructions.Physical stamina and the ability to lift heavy objects.Commitment to safety and quality.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range:$17.36-$28 Target Bonus: 5.0% Req ID:26241 Job ResponsibilitiesThis is a NIGHT SHIFT PositionResponsible for operating and maintaining assigned Machine to produce high-quality machined parts according to specifications. This role requires strong technical proficiency, attention to detail, and a commitment to safety and quality.- Set up assigned Machines according to job specifications and blueprints.- Operate Machines to perform machining operations such as milling, drilling, and tapping.- Monitor machine operations to ensure parts are produced within tolerance and meet quality standards.- Perform routine maintenance on machines to ensure optimal performance and minimize downtime.- Troubleshoot machine issues and make necessary adjustments to maintain production efficiency.- Inspect finished parts for defects and ensure compliance with quality standards.- Follow safety procedures and guidelines to prevent accidents and injuries in the workplace.- Maintain a clean and organized work environment.Job Requirements- High school diploma or equivalent; technical certification or vocational training is a plus.- Experience operating in a manufacturing environment.- Experience with Mazatrol or Mazak Smooth G controller is a must.- Must be experienced with setting up and qualifying weldments.- Strong understanding of machining principles and practices.- Proficiency in reading blueprints and technical drawings.- Ability to use precision measuring tools such as calipers, micrometers, and gauges.- Excellent problem-solving skills and attention to detail.- Ability to work independently and as part of a team.- Good communication skills and the ability to follow instructions.- Physical stamina and the ability to lift heavy objects.- Commitment to safety and quality.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range:$21.39- $30.56 Target Bonus: 5.0% Req ID:26164 Job ResponsibilitiesOn-site support for mechanical installation, de-bug, and final buyoff to customer specifications relative to Fori Automation equipment.Lead/direct, as required, plant personnel during debug/start-up of machines to verify mechanical machine functionality is correct and complete.Assist service manager and other departments to answer product related technical questions from customer.Assist in local and non-local service calls and installations.Train customer personnel on machine functionality and proper start-up and debug of our standard machines.Review checklist and open issue list prior to installation to assure the service technician(s) are lined-up.Assist with our standard manuals to develop a more technically complete and user-friendly service manual.Participate in meeting as required with the project manager and department supervisors to line-up installation plans and review all open-issues prior to shipment.Create and develop improvement ideas and review with managers for approval and implementation.Communicate with customers while on site to give updates to objectives.Write service work orders and job site status reports.Supervise mechanical installation, de-bug, and buyoff activities at customer locations.Coordinate necessary resources for installations, focusing on kits, warranty, etc.Document changes to Fori equipment on prints and return updates to appropriate engineering department.Work with site manager to assure proper flow of daily activities at customer locations.Hands on for installations/service calls/warranty.Job RequirementsMachine Builder or equivalent required.8 years as a Machine Builderon Automation Machines.5 years of de-bugging and installing new machines.Willing to travel to Support Installations and service calls (on-call 24/7 while on installs).Microsoft Office/Excel capabilities.Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range:$22.51-$32.00 Target Bonus: 5.0% Req ID:25719 Job ResponsibilitiesField service and commissioning support of industrial machinery.Assisting customer and local trades in troubleshooting equipment issues.Debug and servicing of electrical components.Perform end user training on equipment operation.Programming and Troubleshooting PLC based equipment.Programming and Troubleshooting HMI (Human Machine Interface) equipment.Writing new PLC and HMI applications per customer requirementsJob RequirementsElectrical Engineering Degree preferred. Mechatronics Degree programs considered.Knowledge or education in computer programming architectures such as VB, C / C++, or C#.Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting.Mathematical skills in geometry and trigonometry.Strong Mechanical aptitude.Excellent analytical and communication skills.Microsoft Windows Operating system and PC experience.Microsoft Office application experience such as Word and Excel.Travel required - approximately 70%Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.