SUMMARY: Assists in the implementation of procedures for quality assurance test and measurement programs. Conducts tests and inspections of a moderately complex nature.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Assists in devising, revising, and implementing methods and procedures for inspecting, testing, and evaluating components and finished products.Maintains test and measurement equipment in proper calibration.Verifies specified requirements of samples by using micrometer, optical components, resistance meters, calipers, scales, microscopes and other equipment as required.Assists with qualification and testing programs by performing functional testing as directed by applicable specifications.Performs statistical analysis to assess costs, disposition, and propose corrective actions for non-conforming materials.Updates and distributes results of the quality reporting system.Maintains records concerning the processing of customer returns and corrective action correspondence.Trains and provides assistance to product inspectors.Performs special testing functions.Applies and maintains quality standards by use of internal facility audits.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a High school diploma or general education degree (GED),One to three years of related experience or training; and/or equivalent combination of education and experience.Ability to read and interpret documents such as safety rules, blue prints, wiring diagrams, operating and maintenance instructions, and procedure manuals.Ability to write simple correspondence.Ability to effectively present information in one-on-one and small group situations.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to occasionally lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.Individuals performing incoming and final inspection must meet minimum standards in at least one eye, corrected or uncorrected, of average or normal on a one time only color vision test and 20/25 on a 12 month near vision test.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.MN STATE POSTING REQUIREMENTSSALARY RANGE: $16/HR - $23/HR (depends on level of experience I, II, or III) BENEFITS DESCRIPTIONCompetitive wages for all team members paid weeklyEligible contributions to 401K at date of hire401K Roth Contributions & After-Tax ContributionsPaid Vacation, Holidays, and 1 additional Personal Day (Accrue at date of hire)Bonus Day(s) awarded annually based on company performance Paid Parental LeaveMedical, Dental and Vision BenefitsFlexible and Health Savings AccountsProfessional Development & TrainingTuition AssistanceCompany sponsored Life Insurance , Short-Term & Long -Term Disability, and Employee Assistance ProgramEmployee Referral Bonus Program[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment.Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.24 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase programEmployee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.Pay Range:For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $38.24/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.· Studies blueprints of product and die or mold and computes specifications.· Plans sequence of operations, visualizing shape of die or mold in reverse of product.· Measures, marks and scribes metal stock to lay out for machining.· Gives machining specifications to Tool Machine Set Up Operators or sets up and operates machines such as vertical mill, engine lathe and CNC milling machine to machine outer dimensions and contoured cavity of die or mold.· Uses surface grinder to fit parts for assembly and to smooth and finish cavity.· Assembles die or mold. Verifies dimensions.· Examines standard or previously used dies or molds, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part.· Keeps an accurate record of maintenance performed on all tools.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through:· Completion of a two year vocational, trade, or technical degree,· Two to five years of related experience or training; and/or equivalent combination of education and experience.· Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.· Ability to write routine reports and correspondence.· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.· Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.· Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.· Knowledge of heat treating steels required.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger or handle or feel objects, tools and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and frequently lift and/or move from 25 to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made while performing the essential job functions of this job. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate to loud.MN STATE POSTING REQUIREMENTSSALARY RANGE: $20/hr - $39/hr (depends on level of experience I, II, or III)BENEFITS OVERVIEW Competitive wages for all team members paid weeklyEligible contributions to 401K at date of hire401K Roth Contributions & After-Tax ContributionsPaid Vacation, Holidays, and 1 additional Personal Day (Accrue at date of hire)Bonus Day(s) awarded annually based on company performancePaid Parental LeaveMedical, Dental and Vision BenefitsFlexible and Health Savings AccountsProfessional Development & TrainingTuition AssistanceCompany sponsored Life Insurance , Short-Term & Long -Term Disability, and Employee Assistance ProgramEmployee Referral Bonus ProgramITAR COMPLIANCE This position requires access to or use of information which is subject to the federal International Traffic in Arms Regulations (ITAR). All applicants for this position must be U.S. Persons within the meaning of ITAR. ITAR defines “U.S. Person” as U.S. citizen, lawful permanent resident of the U.S., person admitted as a refugee to the U.S., person granted asylum in the U.S., or person granted the status of alien lawfully admitted for temporary residence to the U.S. under 8 U.S.C. 1160(a) (for special agricultural workers) or 8 U.S.C. 1255(a)(1) (an amnesty program).[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Careers With Purpose Sanford Health is one of the largest and fastest-growing not-for-profit health systems in the United States. We're proud to offer many development and advancement opportunities to our nearly 50,000 members of the Sanford Family who are dedicated to the work of health and healing across our broad footprint. Facility: Walker Clinic Location: Walker, MN Address: 614 Michigan Ave, Walker, MN 56484, USA Shift: 8 Hours - Day Shifts Job Schedule: Full time Weekly Hours: 32.00 Salary Range: $19.75 - $26.40 Union Position: Yes Department Details About Us: At Sanford Walker Clinic, we are dedicated to providing comprehensive and compassionate care for the whole family. Whether it's an annual checkup, specialty care, or vaccinations, our team of skilled providers is here to ensure your family's health and well-being. Position Overview: We are seeking a passionate and dedicated LPN or CMA to join our family medicine team. This part-time position offers 32 hours per week, providing an excellent opportunity to make a meaningful impact in the lives of our patients. Sign on BONUS for eligible applicants up to $15,000! Job Summary The Licensed Practical Nurse (LPN) will participate in the implementation and evaluation of patient care, under the supervision of a registered nurse, advanced practice provider, or physician. Ensures the health, comfort and safety of patients. Documents a thorough medical history from patient. Contributes to the assessment of patients and administers medications or treatments as ordered. Provides technical support to healthcare professionals as needed. Counseling patients and family members, under the direction of a registered nurse, on prevention and treatment plans. The LPN demonstrates competency and practices within the full scope of nursing expertise/knowledge and utilizes appropriate age and population specific standards as designated in their assigned clinical setting. Qualifications Must have graduated from a school or college of nursing program leading to licensure as a Licensed Practical Nurse. Associate's degree in practical nursing is preferred. Specific services/positions may have additional education, training or experience requirements. Must have attended a pre-licensure nursing program that included supervised clinical experience across the life span as part of the curriculum or have had a minimum of 400 hours of experience as a RN (or LPN) at another facility. Requires current licensure as a practical nurse in the state/states of practice. Benefits Sanford Health offers an attractive benefits package for qualifying full-time and part-time employees. Depending on eligibility, a variety of benefits include health insurance, dental insurance, vision insurance, life insurance, a 401(k) retirement plan, work/life balance benefits, and a generous time off package to maintain a healthy home-work balance. For more information about Total Rewards, visit https://sanfordcareers.com/benefits . Sanford is an EEO/AA Employer M/F/Disability/Vet. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call 1-or send an email to . Sanford Health has a Drug Free Workplace Policy. An accepted offer will require a drug screen and pre-employment background screening as a condition of employment. Req Number: R-0212335 Job Function: Nursing Featured: No