SUMMARY: Assists in the implementation of procedures for quality assurance test and measurement programs. Conducts tests and inspections of a moderately complex nature.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Assists in devising, revising, and implementing methods and procedures for inspecting, testing, and evaluating components and finished products.Maintains test and measurement equipment in proper calibration.Verifies specified requirements of samples by using micrometer, optical components, resistance meters, calipers, scales, microscopes and other equipment as required.Assists with qualification and testing programs by performing functional testing as directed by applicable specifications.Performs statistical analysis to assess costs, disposition, and propose corrective actions for non-conforming materials.Updates and distributes results of the quality reporting system.Maintains records concerning the processing of customer returns and corrective action correspondence.Trains and provides assistance to product inspectors.Performs special testing functions.Applies and maintains quality standards by use of internal facility audits.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a High school diploma or general education degree (GED),One to three years of related experience or training; and/or equivalent combination of education and experience.Ability to read and interpret documents such as safety rules, blue prints, wiring diagrams, operating and maintenance instructions, and procedure manuals.Ability to write simple correspondence.Ability to effectively present information in one-on-one and small group situations.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to occasionally lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.Individuals performing incoming and final inspection must meet minimum standards in at least one eye, corrected or uncorrected, of average or normal on a one time only color vision test and 20/25 on a 12 month near vision test.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.MN STATE POSTING REQUIREMENTSSALARY RANGE: $16/HR - $23/HR (depends on level of experience I, II, or III) BENEFITS DESCRIPTIONCompetitive wages for all team members paid weeklyEligible contributions to 401K at date of hire401K Roth Contributions & After-Tax ContributionsPaid Vacation, Holidays, and 1 additional Personal Day (Accrue at date of hire)Bonus Day(s) awarded annually based on company performance Paid Parental LeaveMedical, Dental and Vision BenefitsFlexible and Health Savings AccountsProfessional Development & TrainingTuition AssistanceCompany sponsored Life Insurance , Short-Term & Long -Term Disability, and Employee Assistance ProgramEmployee Referral Bonus Program[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment.Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.24 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase programEmployee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.Pay Range:For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $38.24/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Job Summary: To ensure that the facility and equipment are maintained and/or repaired in an orderly and quality fashion to keep the plant operating productively. To perform all electrical and mechanical duties as assigned. Duties/Responsibilities: Troubleshoot electrical and mechanical breakdowns.Maintain, alter, rebuild and adjust equipment and facilities to include fabricating parts and assemblies.Follow up on and study recurring facility-oriented failures in an effort to find solutions.Complete all preventative, scheduled and emergency maintenance and repair work to facilities and equipment as required.Perform safety measures in the design and installation of equipment.Maintain an inventory of supplies and materials necessary for the operation of the building and manufacturing.Understand and maintain company safety protocols and policies.Identify workplace hazards, which exist or could develop and correct problems.Perform work to ensure procedures are within safety and governmental compliance.Inform co-workers and employees of precautions and equipment.Accurately record all repairs and maintenance performed in a repairs and maintenance log.Ground and building maintenance as needed. Basic Qualifications: High School diploma or GED required.2-3 years mechanical technician experience in a manufacturing environment.Familiar with production equipment in a manufacturing environment.Mechanical aptitude.Understand Lock-Out-Tag-Out.Electrical knowledge, including but not limited to single phase 120v, three phase 480v and 24 VDC power systems.Electrically inclined, understanding single & 3 phase.Safely handle power tools.Good communication and troubleshooting skills. Desired Skills and Abilities: Welding experience Physical Requirements Ability to lift 60lbs. on a regular basis.Willing to work all shifts. Occasionally be able to do the listed activities: Moving to accomplish tasks or moving from one worksite to another.Communicating with others to exchange information.Operating machine and/or power tools.Work in noisy environments.Ascending or descending ladders, stairs, scaffolding, ramps.Moving self in different position to accomplish tasks in various environments including tight spaces.Remain in stationary position, often standing or sitting for prolonged periods.Repeating motions that may include the wrists, hands, and/or fingers.Assessing the accuracy, neatness and thoroughness of the work assigned.Work in high and low temperatures. CJK Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or a reasonable accommodation to apply for employment, please contact the location HR Manager at or .

Careers With Purpose Join our not-for-profit organization that has provided over 100 years of housing and services to seniors with a commitment to quality care and service in a Christian environment. Facility: GSS MN Brainerd Bethany Location: Brainerd, MN Address: 804 Wright St, Brainerd, MN 56401, USA Shift: 12 Hours - Night Shifts Job Schedule: Full time Weekly Hours: 36.00 Salary Range: $38 - $48 Pay Info: Sign on bonus available! Department Details 4pm-430am, 36 hours per week to include every other weekend and holiday. Generous sign on bonus opportunity. Additional weekend incentive of $1.25/hour. Additional shift incentive of $1.25/hour for any hours from 6pm-6am. Job Summary The Registered Nurse (RN) is responsible for utilizing the nursing process (assessment, diagnosis, outcomes/planning, implementation and evaluation) to provide individualized nursing care to residents. Collaborates with resident and family, other inter-disciplinary colleagues, including providers, to plan, implement and evaluate care. Demonstrates competency and practices within the full scope of nursing expertise/knowledge and utilizes appropriate age and population specific standards as designated in their assigned clinical setting. Cares for residents in all phases of preventative care, health maintenance, diagnosis, and treatment. Responsible for the coordination of care, resident assessment, resident education and various other nursing interventions. May serve as charge nurse and delegate appropriate tasks to license and unlicensed assistive personnel that are within the job descriptions, skills, resident care needs, and the competence level of the delegate. Provides adequate assistance and support to delegates to ensure safe, reliable administration of resident care and resolution of care and service concerns. Functions within the scopes and standards of nursing practice as outlined in the Nurse Practice Act and Administrative Rules in state of practice and licensure. The Professional Nursing Practice recognizes the Scope and Standards of Practice and the Code of Ethics for Nurses with Interpretive Statements as published by the American Nurses Association as the foundation of nursing care delivery and professional conduct. Qualifications Graduate from a nationally accredited nursing program preferred, including, but not limited to, Commission on Collegiate Nursing Education (CCNE), Accreditation Commission for Education in Nursing (ACEN), and National League for Nursing Commission for Nursing Education Accreditation (NLN CNEA). Bachelor’s Degree in nursing preferred. Currently holds an unencumbered RN license with the State Board of Nursing where the practice of nursing is occurring and/or possess multistate licensure if in a Nurse Licensure Compact (NLC) state. Obtains and subsequently maintains required department specific competencies and certifications. Benefits The Good Samaritan Society offers an attractive benefits package for qualifying full-time and part-time employees. Depending on eligibility, a variety of benefits include health insurance, dental insurance, vision insurance, life insurance, a 401(k) retirement plan, work/life balance benefits, and a generous time off package to maintain a healthy home-work balance. For more information about Total Rewards, visit https://sanfordcareers.com/benefits . The Good Samaritan Society is an EEO/AA Employer M/F/Disability/Vet. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call 1-or send an email to . The Good Samaritan Society has a Drug Free Workplace Policy. An accepted offer will require a drug screen and pre-employment background screening as a condition of employment. Req Number: R-0205707 Job Function: Nursing Featured: No

Job Description:Become part of Essentia’s accomplished team as a Registered Nurse (RN) in Brainerd and Baxter, Minnesota, where 465 lakes provide endless options for water sports and recreation. These cities, 125 miles north of Minneapolis, are at the heart of the Brainerd Lakes Area, one of the state’s top vacation destinations.Education Qualifications:BSN or ADN degree from an accredited school or college of nursing.What you'll get to do in this role:Lead Patient Care: Organize and deliver comprehensive care by managing all phases of the patient care process, including assessment, planning, intervention, and evaluation.Guide and Delegate: Act as a team leader by delegating care responsibilities to nursing staff based on their licensure, training, and role specifications.Contribute to a Greater Mission: Play a crucial role in advancing the facility’s and Essentia’s mission and goals, making a meaningful impact on the community we serve.Ensure Compliance: Adhere to the standards set by the Joint Commission and other relevant federal, state, and local regulatory or accrediting agencies.This position will work the following:72 hours per pay periodEvery Third Weekend12 Hour ShiftsOvernight Shift: 7:00PM - 7:30AMJoin our team as a Registered Nurse and be eligible for a sign-on bonus! This incentive is designed to welcome you and reward your commitment to joining our dedicated healthcare team.Licensure/Certification Qualifications:Current nursing licensure in state(s) of employment.Basic Cardiac Life Support (BCLS) certification or ability to become certified within1 month from date of hire.In accordance with Minnesota Rules 245G.11 subdivision 1; all employees must be free of chemical use problems for at least two years immediately preceding their hiring and must sign a statement attesting to that fact. Chemical use problems are defined as: receiving treatment for substance use within the period specified for the position in the staff qualification requirements, including medication-assisted treatment; substance use or mental health disorders that have negatively impacted the staff member’s job performance; substance use or mental health disorders that affect the credibility of treatment services with clients, referral sources, or other members of the community; and symptoms of intoxication or withdrawal on the job.Employee Benefits at Essentia Health:Health Coverage: Medical, dental, and vision insurance options to ensure employees' well-being.Retirement Savings Plans: 401(k) with employer contributions to support long-term financial security.Professional Development: Opportunities for career growth through training, tuition reimbursement, and educational programs.Work-Life Balance: Flexible scheduling, paid time off, and personal leave to help employees manage their professional and personal lives.Employee Wellness Programs: Initiatives focused on physical, mental, and emotional health, including fitness memberships, counseling services, and wellness activities.Employee Benefits at Essentia Health*: Health Coverage:Medical, dental, vision, life and disability insurance, plus supplemental health benefit options to ensure employees' well-being.Retirement Savings Plans: 401(k) with employer contributions to support long-term financial security.Professional Development:Opportunities for career growth through training, tuition reimbursement, and educational programs.Work-Life Balance:Flexible scheduling, time off, holidays, and personal leave to help employees manage their professional and personal lives.Employee Wellness Programs:Initiatives focused on physical, mental, and emotional health, including fitness memberships, counseling services, and wellness activities.*Eligibility for Essentia Health’s benefit programs vary. Please refer to the benefit summary provided to you, or contact our HR Service Center at for more information.Job Location:St Josephs Medical CenterShift Rotation:Permanent Night Rotation (United States of America)Shift Start/End:7:00PM/7:30AMHours Per Pay Period:72Compensation Range:$40.02 - $60.03 / hourUnion:St Josephs MNA RNs (STJRN)FTE:0.9Weekends:Every Third