JOB DESCRIPTIONSign-On Bonus & Relocation Available for Eligible New Hires!Job Title: Airframe & Powerplant (A&P) Technician I, II, IIIPreferred Availability: Monday - Friday: 7:00 am to 3:00 pmNote: This job posting is for all levels of experienced aircraft technicians.Position Overview: As an A&P Technician at Signature Aviation, you will play an integral part in the high level of service that we provide for our guests. Responsibilities include inspecting, repairing, overhauling, upgrading, and cleaning aircraft in compliance with Federal Aviation Administration regulations, aircraft manufacturer recommendations, and company policies. Technicians at all levels maintain detailed records of work conducted, inspections performed, and safety compliance.RESPONSIBILITIESKey Responsibilities:Technical Tasks: Perform routine and complex maintenance tasks, including engine runs, taxi operations, engine and flight control rigging, and troubleshooting aircraft systems.Documentation: Read and interpret technical data, make work order entries, and maintain detailed records.Compliance and Safety: Ensure adherence to safety rules, regulations, and company procedures.Supervision and Management (level dependent): Supervise and mentor junior technicians, manage multiple projects and crews, and communicate effectively with customers and senior leadership.QUALIFICATIONSQualifications:Education:Tech I and II: Associate’s degree or equivalent.Tech III: Master’s degree or equivalent with significant experience.Experience: Relevant field experience varies by level, from zero to ten+ years.Tech I – Zero to 2 years’ experienceTech II – 2 to 10 years’ experienceTech III – 10+ years’ experienceLicenses: Airframe and Powerplant (A&P) license required for all levels.Skills:All levels: Ability to interpret technical documents and communicate effectively.Tech II, III and IV: Manage projects and teams.Additional Requirements:Must pass background checks, drug screens, and be insurable by the company.Strong attention to detail and high ethical standards.Benefits:Health and Wellness options, 401k match, paid time off, tuition assistance, and training opportunities.Tech I: Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, travel. The pay range for this position is $29.95 to $30.50 / hour.Tech II: Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, travel. The pay range for this position is $34.98 to $43.50 / hour.Tech III: Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, travel. The pay range for this position is $40.48 to $52.80 / hour.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

As our Maintenance Planneryou will anticipate and eliminate potential delays by planning and coordinating maintenance resources, parts, materials, and equipment access. This position will report to the Maintenance Supervisor and be responsible for planning and coordinating all planned maintenance activities performed at the site.Who are we This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 100 years! We specialize in manufacturing aluminum and magnesium products for commercial, regional, corporate and military aircraft and engines.What will you do Ensure that safety is considered when developing every job plan.Handle long and short-range planning.Maintain bill of materials (BOM) information for every asset within area of responsibility.Follow a daily routine of visiting work site areas.Scope work and record decisions on Work Planning Checklist.Determine appropriate level of planning for new work orders and PMs from CMMS.Assign work, identify, and plan all work phases when line downtime time permits.Requisition of materials for planned work.Reserve stock items for planned work.Develop planned work for the Weekly Work Schedule.Act at CMMS master data Stuart.Estimate labor hours needed to perform work and scheduling of manpower.Estimate costs, including labor, materials, and contract services, for work performed.Communicate Work Planning Package information to Maintenance Supervisor.Review work feedback information with Maintenance to improve future planning efforts.Coordinate all planned maintenance and minor construction activities in designated facility area.Identify and develop standard work routines and task lists.Assist with supply chain coordination (with Materials Management and Procurement).Attend Weekly Scheduling Meeting.Analyze work completed feedback and execute follow-up actions.Plan shutdown-related work. What do we have to offer $35/ hour and weekly pay5% quarterly bonus potentialPositive and collaborative work environmentPaid trainingEducational Assistance401K with match15 days of PTO9 paid holidays What can you bring to the table Minimum of two (2) years of industrial maintenance and repair experience(2) years of prior experience planning and scheduling maintenance and repair work. A combination of education and specialized planning and scheduling experience may substitute for the two years of prior experience.Working knowledge of pumps, motors, general and specialized parts, electrical, welding and mechanical equipment typically used in manufacturing or comparable facilities is required. Computer skills and experience with inventory management and Computerized Maintenance Management System software necessary. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/.Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in Gaylord, Minnesota is Minnesota's Healthy Heartland! Gaylord is located in south central Minnesota about an hour west of the Twin Cities and 35 minutes from Mankato, Hutchinson, and New Ulm. As the County Seat, Gaylord is the "Hub of Sibley County." Our location produces liquid egg, hardcook egg, and precooked egg such as scrambled, patties and omelets. Responsibilities: POSITION SUMMARY: Responsible for managing Gaylord production processes (Aseptic & Breaking departments) by providing direction and overseeing supervisory staff, ensuring that company policies, procedures and government laws are followed and to coordinate activities between departments.DUTIES AND RESPONSIBILITIES: This position always has the responsibility to comply with Safety work rules as well as an obligation to reinforce Safety as a Core Value.Responsible for all aspects of product manufacturing.Lead and participate in plant and corporate continuous improvement teams.Develop and/or maintain the programs necessary to ensure all employees are properly trained in order to meet company objectives relating to human safety, product quality and safety, human relations and professional development.Actively participate in the management team to promote safety, facility growth and team development.Coordinate activities between Research and Development and plant operations both at the local level and across Michael Foods Inc.Prepare department budgets and monitor expenditures.Develop capital proposals for expansion or cost improvement projects.Responsible for continuous improvement of product quality.Work with customer service department in regards to correspondence and complaint investigation.Direct interaction with regulatory inspectors.Develop and maintain an understanding of the operational processes associated with the manufacturing facility.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained. Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Responsible for Food Safety and Food Quality of MFI products.Perform other duties as assigned. Qualifications: EDUCATION AND EXPERIENCE REQUIRED:Bachelor’s degree or equivalent combination of education, training and/or experience. Bachelor’s degree in engineering, food science or related field or an equivalent combination of education and experience.Must have a minimum of 5-7 years of experience in production and supervision.Supervising personnel in a manufacturing environment.Experience with Lean Manufacturing principles preferred.PREFERRED EDUCATION, EXPERIENCE AND SKILLS: Ability to read, analyze and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers/vendors, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format.Ability to effectively present information to top management, public groups, and/or boards of directors.Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, fractions, ratios. Ability to apply concepts of basic algebra.Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.Frozen foods processing and packagingFluid Aseptic principles, processing and packagingFood safety and sanitation principles (GMP, SQF)State and Federal rules and regulations (USDA, FDA, OSHA, etc.)Knowledge of plant operations and production schedulingHigh performance work teams Managing employees and production operations.Microsoft office (Word, Excel, Outlook, PowerPoint) and inventory control computer programsAdvancement planning of direct reports.Problems solving Preparing and managing department budgets.Leadership and team skills (interpersonal, leading teams, communication)Good written and verbal communication skills, able to make detailed presentations and present them to upper levels of management.#FirstInPeople : The pay range for this position is $96,232 - $150,122 per year.

Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.