Clean Harbors in Eagan, MN is seeking a Class A CDL Driver / Equipment Operator (ICSS) to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Up to 40% overnight travel, hotel and per diem providedHazmat and Tanker endorsements required, no auto restrictionMonday through Friday schedule, average start time 6 amTypically, a 55–65-hour work week, overtime after 40 hrs.On call as needed Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5!Focus on maintaining sustainability and cleaning the EarthPay range $30+ per hr.Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company matchOwn part of the company with our Employee Stock Purchase PlanOpportunities for growth and development for all the stages of your careerCompany paid training and tuition reimbursementEnsure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe mannerOperate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps)Operate a variety of Class A trucksLoading and unloading of trucksManual labor on site to ensure fulfillment of customer needsProper placarding of vehicles to meet Company and DOT requirements/regulationsMaintain daily logs, time sheets, and various reportsFollow all local, state (provincial) and federal compliance regulations and rulesSafely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirementsSafely observe all corporate operating guidelines and proceduresObserve all company environmental health and safety operating guidelinesPerforms other duties as assignedBy position, ability to be on call for emergency response on rotating basis every other weekBy position, site-remediation, equipment decontamination, and the handling of hazardous materialsValid Class A CDLHazmat and Tanker endorsementAbility to operate a manual transmissionAbility to use various mobile devicesPerform physical functions per job requirementsSuccessfully complete a background check, drug test, and physical, by positionPer OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Commercial driver experiencePrevious Hazmat experiencePrevious manual labor experienceClean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or based on any other federal, state/provincial, or local protected class.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors is a Military & Veteran friendly company.*CH

JOB DESCRIPTIONThe Airframe and Powerplant Technician IIgenerally inspects, repairs, overhauls, upgrades and cleans aircraft. A&P’s also provide for the general and routine maintenance and do so in accordance with all Federal Aviation Administration regulations, all aircraft manufacturer's recommendation and all company policies and procedures. Additionally A&P mechanics are required to maintain detailed records concerning all work conducted, inspections performed, conditions found, and safety compliance.Additionally, Technician II’s are more qualified to perform engine run and taxi on multiple aircraft as well perform basic engine rigging, flight control rigging, be able to communicate with customers, estimate tasks, understand basic wiring and structures, and perform of aircraft systems. The senior mechanics also obtain the ability to mentor junior mechanics as well provide supervision while managing multiple projects. Typically A&P Technician II’s have completed 2 or more airframe courses.RESPONSIBILITIESEssential Duties and Responsibilities:Read and interpret MM and inspection guidesSupervise/manage projects and techniciansGeneral and routine maintenanceInspect work performedComplex troubleshooting of aircraft systemsComplex engine and flight control riggingEngine run and taxiMust work well as part of a team, get along with others, follow lawful directions and instructions the first time, follow all company policies and procedures, and ask questions to clarify instructions.Supervisor Responsibilities:Two to three Mechanic, Airframe and Powerplant IQUALIFICATIONSMinimum Education and/or Experience:Associate’s degree or equivalent from two year college or technical school and two plus years related experience and/or training; or equivalent combination of education and experience.Airframe and powerplant license. Multiple airframe schoolsLanguage Skills:Ability to analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers or the general public.Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, travel. The pay range for this position is $29.91 to $35.00 / hour.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Business Unit Description: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael foods, Inc. located in Chaska, Minnesota is known as the "best small town in Minnesota" with a highly rated school system and home of the PGA Tournament in 2018! As our community grows, we strive to preserve the small town atmosphere. Minutes away from beautiful lakes, major highways, shopping malls and the Twin Cities, it is the perfect location to work!. Our location produces a variety of potato products. For over 100 years, the Michael Foods family of businesses has leveraged quality ingredients and innovative processes to offer the finest products and solutions to our customers and to food-loving consumers. Responsibilities: This position is responsible for the daily operation of the Maintenance Department. The Maintenance Supervisor will interface with Production Supervisors, leads, and operators to gather information on issues surrounding the performance of Production and Process equipment. The Maintenance Supervisor coordinates repairs, labor and resources, as well as provides requisitions for repair parts. The Maintenance Supervisor schedules Union and Non Union labor for routine scheduled and overtime work. The maintenance Supervisor approves Vacation and PPT requests. The Maintenance Supervisor provides reviews of their direct staff.BenefitsMedical, Dental, Vision Company Paid life insurance Supplemental life insuranceUp to 136 hours paid time off per year Paidholidays401(k) with up to a 6% company match YearlyincentivebonusEmployee assistance programTuitionreimbursementupto$5,250peryear Shortand long-term disabilityDUTIES AND RESPONSIBILITIES: Assumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks. Insures regulatory compliance.Supervision of maintenance crew.Oversee operation of Boiler and Refrigeration Equipment.Responsible for forklift maintenance.Troubleshoot problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Keep accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costsKeeps manager informed on operating and/or employee problems which may require their attentionEffectively communicate relevant information to employees on shift & to on-coming employees at shift change.Communicating all process inefficiencies, equipment malfunctions, safety concerns and GMP issues to the Production Supervisor & Sanitation SupervisorGeneral cleaning of equipment and maintaining good housekeeping throughout the department per the daily sanitation checklist.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained. Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Adhere to all safety policies and procedures. Perform other duties as assigned.Recruit, Train, Develop Craftsman in multiple disciplinesActively Lead/Participate in Maintenance Reliability and CI projects#firstinpeople Qualifications: JOB QUALIFICATIONS: EDUCATION:Bachelor’s degree or equivalent combination of education, training and/or experience.A minimum of a Bachelor’s degree in Business Management or Engineering or an equivalent combination of education and experience sufficient to successfully perform the essential duties of the job such as those listed above.EXPERIENCE:Minimum of 5 years of maintenance managementExperience with Lean Manufacturing principles preferredOTHER SKILLS AND ABILITIES: KNOWLEDGE OF:Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations, government environmental and safety regulations.Refrigerated foods processing and packagingFood safety and sanitation principles (GMP, SQF)State and Federal rules and regulations (USDA, FDA, OSHA, etc.)Knowledge of plant operations and production schedulingSKILLS IN:Supervising personnel in a manufacturing environmentCommunication and interpersonal relations as applied to interaction with co-workers, supervisors, the general public, etc. sufficient to exchange or convey information and to receive work direction.Be able to recognize problem situations and take appropriate steps to resolve.Microsoft office (Word, Excel, Outlook, PowerPoint) Auto CAD and inventory control computer programs (SAP)Advancement planning of direct reports.Leadership and team skills (interpersonal, leading teams, communication)Good written and verbal communication skills, able to make detailed presentations and present them to upper levels of management. Managing employees and production operationsAble to supervise department personnel in a fair and consistent manner.

Overview: TGK Automotive Specialists – We are a locally-owned business serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.We have immediate openings for General Service Technicians. TheGeneral Service Technicianis responsible for conducting non-technical automotive service repairs such as oil changes, tire and wheel-related services as well as driving customers, picking up parts, and maintaining the cleanliness of the shop as needed.COMPENSATION: $20.00/Hr. - $ 25.00/Hr.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental, and Vision Insurance (Effective 1st of the Month after Hire)Life Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Performs tire mounting/dismounting, wheel balance and tire rotation.Performs oil changes and other basic servicesUtilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle conditionMaintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearanceRequires driving vehicles in a safe and courteous manner obeying all traffic lawsIncludes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicleConducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelinesFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee HandbookQualifications:1 year of previous experience requiredHigh School Diploma or equivalentA valid, clean driver’s license, or obtain a valid driver’s license within 30 days of hire datePossesses a general understanding of under-the-hood, mechanical and under carriage assembliesAbility to work a minimum of five days per week, rotating SaturdaysWorking Conditions and Physical Demands:The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The General Service Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Type:RegularInvest in you, Join Agropur. We dairy you!How Agropur invests in YOU:Competitive and comprehensive compensation and benefits package focusing on your physical, financial, and emotional health to include the following perks as well as the standard benefit offerings:Medical, Dental, Vision, Life, Short and Long-term Disability Insurance401(k) with 7% company contributions3 weeks Paid Time OffPaid holidays and 2 floating holidaysPaid parental leaveAdvancement OpportunitiesWhat’s involved in this role:We are looking for a Maintenance and Reliability Program Manager. Maintenance and Reliability program manager is mainly focused on supporting and implementing the best maintenance and reliability practices of Agropur's Reliability pillar. Lead/facilitate plant improvement (FI) activities such as the development/optimization of maintenance plans, equipment criticality analysis, implementation of management processes, problem solving, definition of roles and responsibilities, etc.Support AM (Autonomous Maintenance) and PM (Progressive Maintenance) pillars as well as RTT deployments of AOS in setting up fundamentals, based on best practices, at the maintenance level.Contribute to the development of the skills and capabilities of our managers through the elements of the Reliability pillar affecting the key areas related to work management, equipment reliability, asset management, failure analysis and elimination, etc.Perform Maintenance and Reliability best practice audits to monitor the progress of site maturity in regards of the Agropur's Reliability pillar and identify opportunities for improvement in order to propose work plans to fill the gaps.Guide, help and support plants in the development of 90-day plans to improve productivity and equipment availability by focusing on the proactive deployment of the various standards of Agropur's Reliability pillar.Define, archive, update and publish plant maintenance and reliability performance indicators.Support the plants in the preparation of their strategic plans at the level of the Reliability pillar aligned with the strategic objectives of the organization and ensure their monitoring and progress.Up to 75% travel required to US Plant locations: MN, SD, IA, ID and WIWhat you need to join our team:Bachelor’s degree in mechanical or industrial Engineering required.CMRP (SMRP) certification required.Minimum 4 years of experience in maintenance and implementation of preventive maintenance and reliability programs required.Continuous improvement process and Lean Manufacturing requiredProficiency in Office suite and reporting tools, CMMS software required.Equivalent combination of education and/or experience may be considered.Where you’ll be working:Agropur’s US operations produce 1 billion pounds of quality, award-winning cheese each year. We create more than 20 different varieties, and provide whey protein and dry ingredients which are by-products of the cheesemaking process. As one of the world’s largest dairy producers, Agropur partners with some of the most recognizable food, beverage and nutrition brands to help feed the world. Better Dairy. Better World. Agropurus.comWe dairy you! JOIN AGROPUR.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. #LI-SN1Agropur welcomes people from all backgrounds and walks of life. We are proud to be an employer with a diverse community and are committed to providing a respectful and inclusive experience for all employees and applicants. We will therefore work with candidates who request accommodation. Please note that an adequate knowledge of French is required for positions in Quebec.

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Maintenance Technician candidates to join our team in Eden Prairie, MN!Starting Pay: $32.87/hour + $1.50 Shift DifferentialShift: 3rd Shift (Sunday night 9pm-6:30am; Monday-Thursday night 10pm-6:30am)At Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs a Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Installing, maintaining, troubleshooting, repairing, and modifying facilities and production equipment, including but not limited to pneumatics, hydraulics and low voltage electrical equipment.Performing basic machining, fabrication, and millwright tasks.Developing and implementing maintenance procedures and techniques for safe, reliable, and efficient operation of the plant.Analyzing data/performance of existing equipment to determine proper maintenance plans, design changes, and improvements.Maintaining equipment parts inventory and stockroom cycle counts.Working with supervisor to identify improvement opportunities.Ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Associate degree or higher in an electrical or mechanical fieldORHigh School Diploma/GED AND 2 years of maintenance experience in a manufacturing environmentIn addition to the above requirements, the following are also required:Ability to work overtime, weekends, holidays, or short notice shift coverage as neededAbility to read and interpret blueprintsPossess knowledge of mechanical, electrical, pneumatic symbols and nomenclatureWork location: Onsite - 10351 W 70th St, Eden Prairie, MN 55344Travel: No TravelRelocation Assistance: Not authorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

PET TRAINERABOUT OUR STORES:Working at PetSmart is not a job, it’s a community of those who work together for the love of pets. If you have a passion for pets, a Pet Trainer at PetSmart might be a great fit for you. You’ll lead the pack (well, class) in terms of teaching engaging classes to pet parents for all stages of their pet’s lives. ABOUT THE ROLE:As a PetSmart Pet Trainer, you'll take part in our Pet Training Instructor Accreditation Program to learn proven techniques developed by leading dog trainers. When you complete the course, you'll emerge as a trusted Accredited Dog Trainer specializing in dog behavior and learning theory. Upon completion, you’ll be hands-on with pets and leading our Pet Training Programs. Through our broad range of class programs, you will:Teach classes to a variety of dog breeds, sizes and agesLead each class with an emphasis on the safety and comfort for pets and pet parentsShow patience to pet parents when training their very excited puppyGuide pets through our NEW (retail’s first ever) Pet Therapy Training ProgramHave a lot of fun. Build strong bonds with all two legged and four legged members of your class!ABOUT YOUR CAREER:While “sit” and “stay” are common words in our classes, they do not describe your career! Just as we are there for pets at every stage of their lives, we’ll be with you at every stage of your career, too. With PetSmart, you will have opportunities to:Gain experience in a different business unitfrom the store to the salon or the Pets HotelDevelop your leadership skills as a department managerTransfer to any one of our 1600 stores nationwide THE WARM AND FUZZIES:We’ve highlighted job responsibilities as best as we could abovebut the best parts of working at PetSmart can’t be fully described in the job description. It’s the excitement you feel when you help a little one pick out his very first fish. And not just any goldfish, but that one, right there, no not that one, this one, yea!It’s the relief Rosie feels when you help her mom select the best food for her upset tummy and her delight when it turns out to be chicken flavored!!It’s the pride of the giving Mickey a makeover in our salons watching him strut his stuff on the way out. Paws off, ladies, he’s taken!It’s the joy of reuniting Frankie with her family after a fun stay in our Pets Hotel. It’s the celebration of Bella’s birthday, Gizmo’s graduation from puppy classes or Ace’s adoption.It’s the little things we do that add up to really big things that pets need. Working at PetSmart is not a job, it’s a community of those who work together for the love of pets.Apply now to experience a career that loves you back.This job summary is intended to describe the general nature and level of work associates/leaders assigned to this job perform. It is not intended to include all duties and responsibilities. You will be provided a copy of a job description for the actual position you are hired in to.This position is also eligible for benefits as described athttps://benefits.petsmart.com/us/.PetSmart is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national or ethnic origin, disability, as well as any other characteristic protected by federal, provincial or local law. Applicants must be over the age of 18 (except in Montana or where otherwise required by local or state law)For applicants in our Waterloo,San Francisco, or Los Angeles locations: Pursuant to the Waterloo andSan Francisco Fair Chance Ordinance, as well as the Los Angeles Fair Chance Initiative for Hiring, we will consider for employment, qualified applicants with arrest and conviction records in a manner consistent with the law

Line of Business: Cement & WhiteHeidelberg Materials is seeking a Plant Maintenance Mechanic to take charge of the maintenance operations at this site. You will have the opportunity to tackle new challenges every day to keep the plant running smoothly and efficiently.What You'll Get To Do• Repair and maintain, by diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment, using hand tools, power tools, and precision measuring and testing instruments. Lubricate machinery, change parts, or perform other routine machinery maintenance. Reassemble machines after the completion of repair or maintenance work. • Observe mechanical devices in operation and listen to their sounds to locate causes of trouble• Lubricate machinery, change parts, or perform other routine machinery maintenance• Reassemble machines after the completion of repair or maintenance work• Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs• Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified procedures• Install, replace, or change machine parts and attachments, according to production specificationsEssential Requirements• High School Diploma or equivalent required• Ability to work different shifts, weekends, holidays, and/or overtime as required. Must adhere to Heidelberg's Attendance Policy at all times.• Safety Minded and MSHA Part 48 training a plus• Physical Requirements: sitting, standing, walking, pushing, pulling, twisting, climbing, balancing, bending (bending at the waist, lifting above the waist, and lifting below the waist), kneeling, reaching, grasping (use of both hands), squatting, repetitive motions, manipulative finger movements with both hands, use of wrists (flexing or rotating with both wrists), use of both feet, use of arms above and below shoulder, work extended periods in the same position, perform duties in all climates i.e. weather, extreme temperatures, tolerate heights, lift and carry up to 75 lbs., work in confined spaces, capable of wearing respiratory and other personal protective equipment. Self-motivatedWhat we have to offer• Competitive base salary• Highly competitive benefits programs• 401k retirement savings plan with an automatic company contribution as well as matching contributionsHeidelberg Materials is a drug-free work place.

The CSC ServiceWorks Story: We’re the leading provider of commercial laundry services, consumer services technology, and air-vending and EV solutions throughout the United States and Canada.Our Best-in-Class team of 2,500 dedicated professionals’ benefit from work that’s steady (but never boring), time to enjoy what matters, appreciation and rewards in return for hard work and accountability, and support in growing a fulfilling career. Overview: Appliance Service TechnicianMonday - FridayAre you a problem-solver who loves to be out in the field Our Appliance Techs provide mechanical repairs to washers and dryers at customer and client locations within their assigned region. Appliance Technicians keep our machines running smoothly to meet customer expectations or the need for repeated service needs. The ideal candidate is someone who enjoys working independently and has a very strong mechanical aptitude.Key Responsibilities:Service and Repair: Perform diagnosis, troubleshooting, and repair of appliances such as washing machines, dryers, and air-vending machines. Ensure that all repairs are carried out efficiently and in accordance with manufacturer guidelines and safety standards.Maintenance: Conduct routine maintenance and preventative services on appliances to ensure optimal performance and extend their lifespan. This includes cleaning, lubricating, replacing worn-out parts, and adjusting settings as necessary.Customer Service: Interact with customers in a professional and friendly manner, addressing their concerns and providing accurate information regarding the repair or maintenance process. Offer advice and recommendations on appliance usage, care, and maintenance to prevent future issues.Documentation: Maintain detailed records of service calls, repairs performed, parts used, and any other relevant information. Prepare service reports and update the internal database with accurate and up-to-date information.Parts and Inventory Management: Monitor and manage inventory levels of spare parts and tools. Order necessary parts and equipment to ensure the availability of required resources for efficient repairs and maintenance.Safety Compliance: Adhere to all safety protocols and guidelines while working with electrical systems and appliances. Ensure personal safety and the safety of customers' property during service calls. Benefits & Perks: Work Life Balance!75% Employer Contribution to Medical, Dental, and Vision insuranceHealth Savings Account with Employer ContributionYear-round Work & Paid TrainingCompany Paid Life, Short-term, and Long-term Disability Insurance401k with generous Company MatchPaid Time Off (PTO) & Holiday PayFlexible Spending & Health Savings AccountEmployee Discounts: Travel, Theme Parks, Home & Auto Insurance and more!Education Reimbursement ProgramPaid employee Referral program What we’re looking for: Valid Driver's LicenseAbility to pass pre-employment screeningPrevious experience in appliance repair or a related field is preferred.Good interpersonal and communication skills to interact with customers effectively.Ability to work independently and manage time efficiently.Physical stamina and dexterity to handle and maneuver heavy appliances.Basic computer skills for documentation and communication purposes.Must be able to lift up to 75 pounds and will frequently work in a variety of environmental conditions (both weather and non-weather related)Visit our Careers Website atwww.cscsw.comto learn more about our available opportunities and the benefits of working for CSC ServiceWorks.CSC ServiceWorks is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.CSC Service Works will comply with local and state laws regarding minimum wages, including requirements specific to cities, counties, and municipalities.

Location: Minneapolis/St. Paul International Airport (Delta Properties)Hours: 6:30am-3:00pm (Monday-Friday)Pay: $44.00-$49.00/Hr.Operates, inspects, and maintains all HVAC, refrigeration, and mechanical equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs and maintenance Individuals are expected to demonstrate technical expertise in HVAC and refrigeration and be multi skilled in electrical, HVAC, Piping/Plumbing and others in order to successfully complete daily/weekly work assignments.Area of ResponsibilityMaintenancePerformance of ongoing preventive and repair response work orders on facility mechanical systems, equipment, and other associated components.Maintain, operate, and repair all HVAC/R systems and associated equipment at assigned locations or as directed. Typical systems and equipment could include HVAC Systems: (Air Handling Unit System (AHU), Fan Coil Units (FCU’s), Variable Air Volume & Constant Air Volume terminal (VAV & CAV), component fans, dampers, coils, fan powered variable air volume & constant volume and package units, UVC Lighting systems in AHUs, Chilled Water Systems, Water Systems, Water Treatment Systems, Thru Wall Heating and Cooling Units, Pumping Systems (mechanical), Air Distribution Systems, Exhaust Systems, Backflow Prevention Systems, Direct Digital Control (DDC), Central Control Panel, Energy Management or Building Management (EMS & BMS) Systems, Electric Duct Heaters, Fire Pump, Jockey Pump, and Associated Systems, and Heat Tracing Systems.Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in everyday activities.Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.SafetyComply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.Maintain compliance to State, County, or City Ordinances, Codes, or Laws.Must complete all required safety trainings as scheduledIdentifies communicates and participates in resolution of all Environmental Health and Safety (EHS) issues as they arise. Complies with departmental policy for the safe storage, usage and disposal of hazardous materials.AdministrativeBe able to update work order status in real timeUtilize Client CMMS system for all work performed.Escalating problems or issues to Customer and Manager in a timely mannerCollaborates with the Parts/Material Supervisor to ensure all needed tools, equipment and supplies are readily available.Works with Work Control Manager on scheduling and reporting of activitiesAttend work and safety meetings as requiredAny and all other duties and tasks assigned.QualificationsHigh School Diploma or equivalent; vocation degree program preferredMinimum of five (5) years of technical experience in all aspects of building engineering with a strong background in the technical aspects of HVAC/R, plumbing, electrical, production equipment repair and maintenance. Knowledge of overall system design and applications.HVAC CertificationEPA UniversalOther abilities Strong Customer Service skillsStrong Interpersonal skills, ability to communicate well in both oral and written reports. Leads by example. Manages competing priorities well. Ability to analyze and make decisions based on broad range of data.Knowledge of applicable codes, laws and regulationsMust be proficient in basic computer application software, such as MS Office, CMMS systems, etc.Ability to work in teams with other trades to effectively complete project workPhysical Work Requirements:Lifting up to 80 lbs.Working from heights.Frequently climbing, bending, lifting, kneeling, stooping, and working/extending overhead.Working in adverse conditions (i.e., extreme cold, extreme hot).Climbing a ladder with a 300 lb weight limit while carrying a tool bag weighing approximately 20 lbs.Climbing a ladder up to 30 feet.Must be available for Call-in work and perform other duties as required.#HVACjobs#MMjobs

Performs maintenance and handyman services in our Kohl's stores ensuring Company Brand Standards are maintained. Performs all work in a quality manner following all safety rules and regulations. Responsible for meeting budgets and communicating effectively with both internal and external customers.ACCOUNTABILITIESGENERAL MAINTENANCE Responsible for timely and accurate completion of work orders as assigned by supervisor Ensures all necessary material and tools to perform daily work are available and kept in good condition (Kohl’s provides all needed tools) Performs Interior Store Repair and Maintenance as assigned by Territory Facilities Manager with a focus on Door (interior and exterior) and Plumbing (faucet, toilet, hot water heater, etc.) repair Performs Interior Lighting and Electrical repairs including but not limited tolamp/ballast replacement, minor outlet repairs, once per year 90 minute emergency light testing and repairs, etc. Pro cient in other Interior Repair and Maintenance items including but not limited to ooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, xture, and stroller/ cart, and cleaning equipment repairs Performs exterior maintenance of building including but not limited to low elevation (can be reached with a 12ft ladder), building painting, curb/ramp painting,power-washing, and minor Common Area Maintenance repairs of landscaping, signage, and concrete/asphaltIDENTIFY MAINTENANCE ISSUESAssists stores with Housekeeping problem solving with suggested solutions for Store Associate teams and Contract Cleaning providers to increase CLEAN presence in stores. Communicates safety and cleanliness issues and action plans to resolve with Store Management and Territory Facilities Manager Identi es Interior and Exterior maintenance issues that need resolution by exterior vendors and enters those issues into Web Based Facilities Management program for assignment and completion Communicates recaps regularly to Territory Facilities Manager and/or Store and District Managers of stores visited, wins/opportunities found, as well as issues resolved on store visits. Communication may be verbal or emailQUALIFICATIONSREQUIRED Ability to work independently without direct face to face Ability to effectively communicate with multiple levels in Store organization verbally and written Pro cient in Microsoft Word, Excel, navigation of websites and able to utilize new computer systems, including smartphones 2-4 years of prior maintenance work with a strong focus in Door, Plumbing, Electrical / Lighting, and Handyman Services Prior retail or o ce building maintenance experience Familiar with General Maintenance tools and tasksPREFERREDAbility to repair a variety of other interior/exterior issues as assigned by Supervisor including equipment and CAM itemsSPECIAL Moderate lifting – 25 to 50lbs on a regular basis Ability to travel up to 100% of the time with some overnight stays based on store schedule/location Ability to climb/work on ladders up to 12ft in height in order to address lighting, painting, etc. issues Valid driver’s license with a currently registered vehiclePay Range: $22.40 - $35.85Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

JOB DESCRIPTIONJob Title: Airframe & Powerplant (A&P) Technician I, II, IIINote: This job posting is for all levels of experienced aircraft technicians.Position Overview: As an A&P Technician at Signature Aviation, you will play an integral part in the high level of service that we provide for our guests. Responsibilities include inspecting, repairing, overhauling, upgrading, and cleaning aircraft in compliance with Federal Aviation Administration regulations, aircraft manufacturer recommendations, and company policies. Technicians at all levels maintain detailed records of work conducted, inspections performed, and safety compliance.RESPONSIBILITIESKey Responsibilities:Technical Tasks: Perform routine and complex maintenance tasks, including engine runs, taxi operations, engine and flight control rigging, and troubleshooting aircraft systems.Documentation: Read and interpret technical data, make work order entries, and maintain detailed records.Compliance and Safety: Ensure adherence to safety rules, regulations, and company procedures.Supervision and Management (level dependent): Supervise and mentor junior technicians, manage multiple projects and crews, and communicate effectively with customers and senior leadership.QUALIFICATIONSQualifications:Education:Tech I and II: Associate’s degree or equivalent.Tech III: Master’s degree or equivalent with significant experience.Experience: Relevant field experience varies by level, from zero to ten+ years.Tech I – Zero to 2 years’ experienceTech II – 2 to 10 years’ experienceTech III – 10+ years’ experienceLicenses: Airframe and Powerplant (A&P) license required for all levels.Skills:All levels: Ability to interpret technical documents and communicate effectively.Tech II, III and IV: Manage projects and teams.Additional Requirements:Must pass background checks, drug screens, and be insurable by the company.Strong attention to detail and high ethical standards.Benefits:Health and Wellness options, 401k match, paid time off, tuition assistance, and training opportunities.Pay ranges vary based on multiple factors including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, travel. The pay range for this position is $29.91 to $35.00 / hour.ABOUT USSignature Aviation is the world's largest Fixed Base Operators (FBO) network, with over 200 locations and 5,000 employees globally. This worldwide FBO network is home to essential business and private aviation support services, including refueling, hangarage, maintenance, repair and overhaul, and other world-class amenities with exceptional customer service. We are renowned for delivering an exceptional guest experience and seek like-minded team members to ensure that every interaction reflects our commitment to excellence and hospitality.From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation.Our Benefits:Medical/prescription drug, dental, and vision InsuranceHealth Savings AccountFlexible Spending AccountsLife InsuranceDisability Insurance401(k)Critical Illness, Hospital Indemnity and Accident InsuranceIdentity Theft and Legal ServicesPaid time offPaid Maternity LeaveTuition reimbursementTraining and DevelopmentEmployee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in Gaylord, Minnesota is Minnesota's Healthy Heartland! Gaylord is located in south central Minnesota about an hour west of the Twin Cities and 35 minutes from Mankato, Hutchinson, and New Ulm. As the County Seat, Gaylord is the "Hub of Sibley County." Our location produces liquid egg, hardcook egg, and precooked egg such as scrambled, patties and omelets. Responsibilities: This position is responsible for the daily operation of the Maintenance Department on nights. The Maintenance Supervisor will interface with Production Supervisors, leads, and operators to gather information on issues surrounding the performance of Production and Process equipment. The Maintenance Supervisor coordinates repairs, labor and resources, as well as provides requisitions for repair parts. The Maintenance Supervisor schedules Non Union labor for routine scheduled and overtime work. The maintenance Supervisor approves Vacation and PPT requests. The Maintenance Supervisor provides reviews of their direct staff.BenefitsMedical, Dental, Vision Company Paid life insurance Supplemental life insuranceUp to 136 hours paid time off per year Paidholidays401(k) with up to a 6% company match YearlyincentivebonusEmployee assistance programTuitionreimbursementupto$5,250peryear Shortand long-term disabilityDUTIES AND RESPONSIBILITIES: Assumes personal responsibility to insure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and, incorporate safety and health in all jobs and tasks. Insures regulatory compliance.Supervision of maintenance crew.Oversee operation of Boiler and Refrigeration Equipment.Responsible for forklift maintenance.Troubleshoot problems with equipment.Provides a safe work environment for employees.Recognizes and takes steps to resolve operating problems in order to minimize their impact on the operations.Keep accurate and up-to-date records (I.E. timecards, downtime records, absentee records, etc.)Enforces company policies in a fair and consistent manner.Encourages suggestions from employees which will improve production, quality, safety and/or control costsKeeps manager informed on operating and/or employee problems which may require their attentionEffectively communicate relevant information to employees on shift & to on-coming employees at shift change.Communicating all process inefficiencies, equipment malfunctions, safety concerns and GMP issues to the Production Supervisor & Sanitation SupervisorGeneral cleaning of equipment and maintaining good housekeeping throughout the department per the daily sanitation checklist.Adhere to safe work practices, follow GMP’s, maintain sanitary conditions and ensure that product quality is maintained. Report to management any conditions or practices that may adversely affect food safety, food quality or personnel safety.Adhere to all safety policies and procedures. Perform other duties as assigned.Recruit, Train, Develop Craftsman in multiple disciplinesActively Lead/Participate in Maintenance Reliability and CI projects#firstinpeople Qualifications: JOB QUALIFICATIONS: EDUCATION:Bachelor’s degree in Business Management or Engineering or 3+ years maintenance experienceEXPERIENCE:Minimum of 3 years of maintenance managementExperience with Lean Manufacturing principles preferredOTHER SKILLS AND ABILITIES:KNOWLEDGE OF:Knowledge of basic mechanics, welding, electrical, fabrication, preventative maintenance, plant operations, government environmental and safety regulations.Refrigerated foods processing and packagingFood safety and sanitation principles (GMP, SQF)State and Federal rules and regulations (USDA, FDA, OSHA, etc.)Knowledge of plant operations and production schedulingSKILLS IN:Supervising personnel in a manufacturing environmentCommunication and interpersonal relations as applied to interaction with co-workers, supervisors, the general public, etc. sufficient to exchange or convey information and to receive work direction.Be able to recognize problem situations and take appropriate steps to resolve.Microsoft office (Word, Excel, Outlook, PowerPoint) Auto CAD and inventory control computer programs (SAP)Advancement planning of direct reports.Leadership and team skills (interpersonal, leading teams, communication)Good written and verbal communication skills, able to make detailed presentations and present them to upper levels of management. Managing employees and production operationsAble to supervise department personnel in a fair and consistent manner.

Overview: TGK Automotive Specialists – We are a locally-owned business serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.We have immediate openings for General Service Technicians. TheGeneral Service Technicianis responsible for conducting non-technical automotive service repairs such as oil changes, tire and wheel-related services as well as driving customers, picking up parts, and maintaining the cleanliness of the shop as needed.COMPENSATION: $20.00/Hr. - $ 25.00/Hr.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental, and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Performs tire mounting/dismounting, wheel balance and tire rotation.Performs oil changes and other basic servicesUtilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle conditionMaintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearanceRequires driving vehicles in a safe and courteous manner obeying all traffic lawsIncludes transporting customers, picking up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicleConducts State Safety and Emission Inspections (in applicable locations) on vehicles in an ethical manner following all company and state guidelinesFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, and all company policies and procedures as outlined in the Sun Auto Tire & Service Employee HandbookAbility to work flexible schedules, Monday- FridayQualifications:Possesses a general understanding of under the hood, mechanical and under carriage assembliesValid Driver’s license in the work State (out-of-state driver’s licenses must be transferred to work state within 30 days of hire)High School Diploma or equivalent preferredWorking Conditions and Physical Demands:The General Service Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The General Service Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Overview: ** Immediate opening for Sr. Automotive Repair Technicians/Mechanics **Pay: $75,000 - $120,000 per year (Flag pay structure)TGK Automotive Specialists – We are a locally-owned business serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s, and company repair standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision Insurance (Effective 1st of the Month after Hire)Life Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracyPerforms complex and heavy-duty repairsExplains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customersRecommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer fileFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee HandbookAbility to work flexible schedules, Monday - SaturdayQualifications:Previous automotive technician / mechanic experience requiredASE certifications in lieu of experienceAbility to demonstrate proper use of computerized equipment for diagnosticsValid Driver’s license in the work State (out-of-state driver’s licenses must be transferred to work state within 30 days of hire)High School Diploma or equivalent; Technical School experience preferredWorking Conditions and Physical Demands:The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The Senior Automotive Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Overview: ** Immediate opening for Sr. Automotive Repair Technicians/Mechanics **Pay: $75,000 - $120,000 per year (Flag pay structure)TGK Automotive Specialists – We are a locally-owned business serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s, and company repair standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision Insurance (Effective 1st of the Month after Hire)Life Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracyPerforms complex and heavy-duty repairsExplains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customersRecommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer fileFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee HandbookAbility to work flexible schedules, Monday - FridayQualifications:Previous automotive technician / mechanic experience requiredASE certifications in lieu of experienceAbility to demonstrate proper use of computerized equipment for diagnosticsValid Driver’s license in the work State (out-of-state driver’s licenses must be transferred to work state within 30 days of hire)High School Diploma or equivalent; Technical School experience preferredWorking Conditions and Physical Demands:The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The Senior Automotive Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Overview: ** Immediate opening for Sr. Automotive Repair Technicians/Mechanics **Pay: $75,000 - $120,000 per year (Flag pay structure)TGK Automotive Specialists – We are a locally-owned business serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s, and company repair standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision Insurance (Effective 1st of the Month after Hire)Life Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracyPerforms complex and heavy-duty repairsExplains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customersRecommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer fileFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee HandbookAbility to work flexible schedules, Monday - FridayQualifications:Previous automotive technician / mechanic experience requiredASE certifications in lieu of experienceAbility to demonstrate proper use of computerized equipment for diagnosticsValid Driver’s license in the work State (out-of-state driver’s licenses must be transferred to work state within 30 days of hire)High School Diploma or equivalent; Technical School experience preferredWorking Conditions and Physical Demands:The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The Senior Automotive Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Overview: ** Immediate opening for Sr. Automotive Repair Technicians/Mechanics **Pay: $75,000 - $120,000 per year (Flag pay structure)(Up to $4,000 SIGN-ON BONUS)TGK Automotive Specialists – We have been serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s, and company repair standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracyPerforms complex and heavy-duty repairsExplains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customersRecommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer fileFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee HandbookAbility to work flexible schedules:Hours of Operation:Monday - Friday 7am-6pmSaturday 7am-5pmSunday- Closed.Qualifications:Previous automotive technician / mechanic experience requiredASE certifications in lieu of experienceAbility to demonstrate proper use of computerized equipment for diagnosticsValid Driver’s licenseMust be at least 18 years oldHigh School Diploma or equivalent; Technical School experience preferredWorking Conditions and Physical Demands:The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The Senior Automotive Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Overview: ** Immediate opening for Sr. Automotive Repair Technicians/Mechanics **Pay: $75,000 - $120,000 per year (Flag pay structure)TGK Automotive Specialists – We are a locally-owned business serving our clients with honesty and integrity since 2007. We maintain the highest level of repair and service at a fair price and are devoted to client satisfaction.The Senior Automotive Technician is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s, and company repair standards.Benefits:Competitive Bi-Weekly PayTuition ReimbursementPaid Vacation and Sick Time 6 Paid HolidaysMedical, Dental and Vision InsuranceLife Insurance (Company paid)401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracyPerforms complex and heavy-duty repairsExplains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customersRecommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer fileFollows all safety procedures and reports any concerns to direct supervisorAdheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee HandbookAbility to work flexible schedules, Monday - FridayQualifications:Previous automotive technician / mechanic experience requiredASE certifications in lieu of experienceAbility to demonstrate proper use of computerized equipment for diagnosticsValid Driver’s license in the work State (out-of-state driver’s licenses must be transferred to work state within 30 days of hire)High School Diploma or equivalent; Technical School experience preferredWorking Conditions and Physical Demands:The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions.The Senior Automotive Technician must be able to meet the following physical requirements:Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the buildingBend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequentlyLift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently.Communicate with customers and shop personnelVision sufficient to detect color, depth, and re-focusReasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.