Job DescriptionReady to build a career with a company that’s leading the foodservice industry Location: Plymouth MNSchedule:Monday thru FridayStart time 9pmPay starting at $34.00 per hour. This role is eligible for overtime compensation and a $15,000 Retention Bonus.Troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations as pertaining to the shop and fleet.Ability to read and understand technical and service manuals.Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is $34.00 to $38.00 per hour. As applicable, this role will alsoreceive overtime compensation, retention bonus, certification premium, CDL premium . Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance.

A teammate in this position learns the essential functions of the Driver job including the accurate and timely distribution of products to various customer locations. The Driver Trainee gains exposure to warehouse and other operational functions as part of the developmental process of becoming a McLane Driver.On site CDLA School that is fully paid by McLane. School is Monday - Friday in Northfield, MN. Pay Rate: $23.25 an hour while in school and training.Day 1 Benefits available: medical, dental, and vision insurance, FSA/HSA and company-paid life insurance.401(k) Profit Sharing Plan after 90 days.Paid holidays, vacation time, sick leave accrual, educational assistance program, and more! ESSENTIAL JOB FUNCTIONS:A teammate in this job will train side-by-side with a Driver Trainer to acquire the skills necessary to perform the following functions:Maneuver tractor into position to attach trailer and handle lines to secure.Operates truck in a safe manner in compliance with all local, state, and federal regulations and company policies.Inspect tractor-trailer equipment for defects pre/post trip and submit DOT inspection report indicating condition.Operates Driver Delivery Handheld (DDH), document delivery receipts/product temperatures and exceptions. Inspects trailer to ensure product is secure for undamaged transport of product.Rides and trains with Driver Trainer of tractor-trailer to various destinations, gaining knowledge of commercial driving regulations and observing the Driver's skill in starting engine properly, approaching intersections, making turns, backing, parking, and maneuvering vehicle on the road and on customer premises.Maintain driver log (Manual or PeopleNet) according to DOT regulations, documenting delivery receipt, product temperatures and exceptions.Assists the Driver in unloading trailer and delivering product into customer premises.MINIMUM REQUIREMENTS:A teammate in this position must:High School Diploma or GED preferred.Be at least 21 years of age.Must obtain CDLA Permit prior to entering CDLA class.Complete training and receive Class A CDL in 6 months or less.Ability and willingness to select/load/unload and/or deliver ALL products that may be ordered by McLane customers.Stand, walk, sit, climb, reach, bend, squat, and stoop to accomplish the essential job functions.Read and comprehend labels, instructions, and bills of lading.Perform mathematical calculations to verify quantities of product.Communicate with customers, management, and other teammates.Safely drive a tractor-trailer, use a 2-wheeled dolly, ramp, and on board PeopleNet devices.WORKING CONDITIONS:The environment encompasses all areas of a distribution center, transportation department, shop and customer facilities.Working conditions could contain moderate noise, vibration of vehicle and extreme weather conditions depending on climate.Regular and frequent travel, including overnight.WORK SAFE HOME SAFE is one of our mottos at McLane Company. Your safety and ability to do your job and get home to your family is why all prospective teammates go through a pre-hire screening process.Candidates will be subject to a background check and drug screen in accordance with applicable laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Northern Tier BU - Region 02 - Market 12: 8101 Hadley Ave. S., Cottage Grove, Minnesota 55016Availability - Shift/DaysFull time Day Shift - All DaysMinimum QualificationsThe minimum qualifications for a Store Manager are:High School diploma or GED preferred.Experience in retail sales preferred.Experience to perform the essential duties, responsibilities and working in the conditions described below.Ability to supervise and train for the use of equipment, tools and materials listed in the Customer Service Representative (CSR) and Assistant Site Manager (ASM) job description.Ability to supervise and manage the functions listed in the CSR and ASM job description.Ability to use computer, or acquire those skills necessary to use a computer at the site, which includes analysis of reports, inventory control, cash control, counseling notices, etc.A valid driver’s license and adequate transportation to/from bank and corporate management meetings.Ability to communicate (orally and in writing) in English.Perform other duties as assigned or delegated by his/her supervisor.ESSENTIAL DUTIES, RESPONSIBILITIES AND SKILLSLeadership and ManagementRecruit, hire and train positive, enthusiastic employees, ensuring excellent customer service.Develop, manage and assign tasks appropriately to ensure the site is clean, adequately stocked, organize and well kept based on Company standards.Maintain a professional and supportive image among subordinates and supervisor.Schedule employees within Company guidelines to maximize customer service and maintain site image.Implement non-discriminatory related management skills while hiring, training, counseling, motivating and separating employees.Site RelationshipsDevelop positive and professional relationships with all suppliers.Promote excellent service and resolve customer complaints in a timely, professional manner.Promote and ensure a safe, positive public image within the neighboring community.Training and DevelopmentPrepare on-going and timely performance appraisals in writing for all employees, providing proper performance based feedback.Train all employees ensuring that customer service, site image and marketing execution meet Company standards.Train all employees on safety procedures and promote safety awareness.CommunicationDevelop ways and means to ensure that all employees receive proper communication in a timely manner.Establish periodic on-going communication meetings with all site employees and the Market Manager.Organizing and PlanningEvaluate and develop specific action plans to address the needs of the site in order to reach the desired objectives.Organize and maintain all site files and manuals.Manage and supervise store employees to ensure that all required and requested reports due are completed accurately and timely.Manage and supervise store employees to ensure that all merchandise is stocked, attractively displayed and priced correctly.Ensure that all required employment related posters and signs are in a place that is easily accessible to all employees.FinancialAnalyze daily sales and expense information and take appropriate action to maximize sales and net profits.Budget and forecast P&L lines, as well as understand and manage merchandise margins.Safeguard and account for all money received and disbursed.Perform all other financial analysis necessary to maximize sales and net profits.Working ConditionsPerforms approximately all work indoors but will be required to work outside in order to clean parking lots, gas pumps, take out garbage, etc.Be exposed to occasional cold temperature extremes while supervising or managing store employees performing occasional work in a walk-in cooler and/or freezer.Be exposed to occasional noise.Work with a minimum of direction and supervision.At all times work as an effective manager, supervisor and leader.THE ABOVE STATEMENTS REFLECT THE GENERAL QUALIFICATIONS/DUTIES AND/OR RESPONSIBILITIES NECESSARY TO IDENTIFY THE JOB AND ARE NOT NECESSARILY INTENDED TO SET FORTH ALL OF THE SPECIFIC REQUIREMENTS OF THE JOB.NOTE: This job description may change periodically as required by business necessity, with or without advance notice to or consent by the employee.Hiring Range: $14.94 to $21.68Circle K is an Equal Opportunity Employer.The Company complies with the Americans with Disabilities Act (the ADA) and all state and local disability laws. Applicants with disabilities may be entitled to a reasonable accommodation under the terms of the ADA and certain state or local laws as long as it does not impose an undue hardship on the Company. Please inform the Company’s Human Resources Representative if you need assistance completing any forms or to otherwise participate in the application process.Click below to review information about our company's use of the federal E-Verify program to check work eligibility:In EnglishIn Spanish

As a1st shiftMaintenance Tech / Mechatronics Tech,you willsupport the equipment in the facility, ensuring it is operating in a safe and efficient manner at all times. This position will work M-F from 5-1:30pm. Who are we This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 100 years! We specialize in manufacturing aluminum and magnesium products for commercial, regional, corporate and military aircraft and engines.What will you do Analyzes & make repairs on electrical (460volts), mechanical, hydraulic, and pneumatic equipmentMaintain inventory of spare parts for area of focusMaintain maximum production and quality by making correct adjustmentsReview production schedule and make equipment changes as neededTroubleshoot and test equipment to check operationsPerform scheduled maintenance/predictive maintenance & emergency repairs, as neededWork on fabrication projects for all areas of the plant using a lathe/mill and various pieces of welding equipmentWork with Production Supervisors to modify/changeReport findings to supervisorWork on miscellaneous facility improvement projects, as neededAcquire additional certifications and credentials as required for work or career development What do we have to offer $34-37/ hourplus quarterly bonuses5% quarterly bonus potentialPositive and collaborative work environmentFlexible schedulePaid trainingEducational Assistance401K with matchPTO9 paid holidays What can you bring to the table 2-year technical degree preferred, or equivalent experience will be considered3 years of previous experience in a Technical Maintenance role in an industrial manufacturing environment requiredHVAC experience preferredPrevious experience working with PLC’s and VFD’s strongly preferred, with focus on Allen Bradley communication Protocols Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/.Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

As aMaintenance/ Mechatronics Tech, you willsupport the equipment in the facility, ensuring it is operating in a safe and efficient manner at all times. This position will work 1-9:30 pm M-F. Who are we This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 100 years! We specialize in manufacturing aluminum and magnesium products for commercial, regional, corporate and military aircraft and engines.What will you do Analyzes & make repairs on electrical (460volts), mechanical, hydraulic, and pneumatic equipmentMaintain inventory of spare parts for area of focusMaintain maximum production and quality by making correct adjustmentsReview production schedule and make equipment changes as neededTroubleshoot and test equipment to check operationsPerform scheduled maintenance/predictive maintenance & emergency repairs, as neededWork on fabrication projects for all areas of the plant using a lathe/mill and various pieces of welding equipmentWork with Production Supervisors to modify/changeReport findings to supervisorWork on miscellaneous facility improvement projects, as neededAcquire additional certifications and credentials as required for work or career development What do we have to offer $34-37/ hourplus quarterly bonuses5% quarterly bonus potentialPositive and collaborative work environmentFlexible schedulePaid trainingEducational Assistance401K with matchPTO9 paid holidays What can you bring to the table 2-year technical degree preferred, or equivalent experience will be considered3 years of previous experience in a Technical Maintenance role in an industrial manufacturing environment requiredHVAC experience preferredPrevious experience working with PLC’s and VFD’s strongly preferred, with focus on Allen Bradley communication Protocols Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/.Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected sta This is a non-management positionThis is a full time position

As aMaintenance/ Mechatronics Tech, you willsupport the equipment in the facility, ensuring it is operating in a safe and efficient manner at all times. This position will work Sunday-Thursday from 9-5:30 am. Who are we This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 100 years! We specialize in manufacturing aluminum and magnesium products for commercial, regional, corporate and military aircraft and engines.What will you do Analyzes & make repairs on electrical (460volts), mechanical, hydraulic, and pneumatic equipmentMaintain inventory of spare parts for area of focusMaintain maximum production and quality by making correct adjustmentsReview production schedule and make equipment changes as neededTroubleshoot and test equipment to check operationsPerform scheduled maintenance/predictive maintenance & emergency repairs, as neededWork on fabrication projects for all areas of the plant using a lathe/mill and various pieces of welding equipmentWork with Production Supervisors to modify/changeReport findings to supervisorWork on miscellaneous facility improvement projects, as neededAcquire additional certifications and credentials as required for work or career development What do we have to offer $34-37/ hourplus quarterly bonuses5% quarterly bonus potentialPositive and collaborative work environmentFlexible schedulePaid trainingEducational Assistance401K with matchPTO9 paid holidays What can you bring to the table 2-year technical degree preferred, or equivalent experience will be considered3 years of previous experience in a Technical Maintenance role in an industrial manufacturing environment requiredHVAC experience preferredPrevious experience working with PLC’s and VFD’s strongly preferred, with focus on Allen Bradley communication Protocols Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/.Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected sta This is a non-management positionThis is a full time position

As our Responsible Level III, you are responsible for the training, approval, and certification of the responsible level I, II and III’s within the company. You will develop, qualify, and approve procedures, techniques, interpreting codes, standards, specifications, and procedures, as well as designating the NDT methods, techniques, and procedures to be used. You must be capable of interpreting and evaluating results in terms of existing codes, standards and specifications and have sufficient practical background in applicable materials, fabrication, and product technology to establish techniques and delegate this responsibility to the appropriate quality department personnel.You will have the authority to supersede and finalize product acceptance decisions. Who are we This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 100 years! We specialize in manufacturing aluminum and magnesium products for commercial, regional, corporate and military aircraft and engines. What will you do Responsible for the training program, examination, certification, and approval of the Level I, II and III’s within the NDT department (responsibility includes ensuring all NDT personnel meet near vision and color perception requirements).Must be certified in accordance with NAS410 as a Level III in one or more of the NDT methods (film and/or digital x-ray).Must provide proof of near vision and color perception acceptance records that meet CPP requirements. Candidates for radiographic inspection certification shall comply with regulatory agency requirements for ionizing radiation safety per CPP’s radiation safety procedure(s). Conduct annual performance reviews with customer certified level III’s and internal SCA’s across all OEMs as required. Prepare and conduct NADCAP audits associated with Etch, FPI, X-Ray.The responsible level III shall obtain all customer required certifications and maintain them in accordance with customer specifications.Conduct weekly and monthly NDT (X-Ray, Digital, FPI) departmental and personnel audits in accordance with PGI-10-01, PGI-10-02 and PGI-10-07 to ensure compliance of the NDT quality system.Must obtain thorough knowledge of written instructions, procedures, codes, specifications, and standards used by CPP Minneapolis.Given the accountability for identifying and assuring implementation of customer NDT requirements (NDT procedure development and approval and technique development/review and approval).Create quality plans for product qualification (FMEA) for NDT departments and validate production processes. Ability to communicate weekly to customers via email and phone conferences.Attendance at daily stand up, RCCA, scrap and continuous improvement meetings. Review and implement specifications as directed by customers and the governmentApprove product/process changes via Engineering Change Requests, or Customer Engineering Change Requests What experience will make you a successful candidate Bachelor’s or associates degree in NDT, Engineering or directly related field required. 7+ years’ experience in directly related field (level III or responsible level III). Certifications/Licenses: Certified in NAS410 as a Level III in one or more of the NDT methods (film x-ray, digital x-ray, FPI) (required).Ability to pass NEAR VISION – Snellen 20/25 at 16” +/- 1” or Jaeger No. 1 at not less than 12” with one eye, either natural or corrected (required).Ability to pass COLOR PERCEPTION – The Ishihara Color Vision Test is used to distinguish and differentiate between colors used in the method for which certification is sought (required).Attention to detail, ability to communicate at all levels of the organization, working knowledge of MS Office Suite (Word, PowerPoint, Excel), ability to work with others through complex situations What do we have to offer $00 yearly salary5% quarterly bonus potentialPositive and collaborative work environmentFlexible schedulePaid trainingEducational Assistance401K with matchPTO9 paid holidays Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/. Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a management positionThis is a full time position

As our Maintenance Planneryou will anticipate and eliminate potential delays by planning and coordinating maintenance resources, parts, materials, and equipment access. This position will report to the Maintenance Supervisor and be responsible for planning and coordinating all planned maintenance activities performed at the site.Who are we This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 100 years! We specialize in manufacturing aluminum and magnesium products for commercial, regional, corporate and military aircraft and engines.What will you do Ensure that safety is considered when developing every job plan.Handle long and short-range planning.Maintain bill of materials (BOM) information for every asset within area of responsibility.Follow a daily routine of visiting work site areas.Scope work and record decisions on Work Planning Checklist.Determine appropriate level of planning for new work orders and PMs from CMMS.Assign work, identify, and plan all work phases when line downtime time permits.Requisition of materials for planned work.Reserve stock items for planned work.Develop planned work for the Weekly Work Schedule.Act at CMMS master data Stuart.Estimate labor hours needed to perform work and scheduling of manpower.Estimate costs, including labor, materials, and contract services, for work performed.Communicate Work Planning Package information to Maintenance Supervisor.Review work feedback information with Maintenance to improve future planning efforts.Coordinate all planned maintenance and minor construction activities in designated facility area.Identify and develop standard work routines and task lists.Assist with supply chain coordination (with Materials Management and Procurement).Attend Weekly Scheduling Meeting.Analyze work completed feedback and execute follow-up actions.Plan shutdown-related work. What do we have to offer $35/ hour and weekly pay5% quarterly bonus potentialPositive and collaborative work environmentPaid trainingEducational Assistance401K with match15 days of PTO9 paid holidays What can you bring to the table Minimum of two (2) years of industrial maintenance and repair experience(2) years of prior experience planning and scheduling maintenance and repair work. A combination of education and specialized planning and scheduling experience may substitute for the two years of prior experience.Working knowledge of pumps, motors, general and specialized parts, electrical, welding and mechanical equipment typically used in manufacturing or comparable facilities is required. Computer skills and experience with inventory management and Computerized Maintenance Management System software necessary. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/.Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

JOB DESCRIPTIONNomad Health seeks an experienced Computed Tomography radiology tech for a travel assignment in MN.Take the next step in your healthcare career and join Nomad Health as a travel radiologic technologist. As a traveler with Nomad, you get access to industry-leading pay, outstanding benefits, and our knowledgeable Nomad Navigator support team.QUALIFICATIONSAt least one year of total experience as a radiology tech (some jobs may require more experience)An active individual state license and/or certification to practice as a rad techAn active credential issued by ARRTRegister for a Nomad Health account to view full job details and applyNOMAD BENEFITSMajor medical and dental plans available on your first day of work401(k) with employer matching availableReimbursement for travel to your assignmentHousing stipendWeekly deposits direct to your bank accountTravel radiology technologists use x-ray, computed tomography (CT), magnetic resonance imaging (MRI), and/or fluoroscopy to help diagnose and visualize different maladies. Some on-the-job responsibilities include, but are not limited to: providing individualized, non-judgemental, non-discriminatory care to all patients, families, and staff, monitoring patient condition and assessing needs, and communicating and documenting all required details as per facility charting protocol.To apply for a travel radiology technologist or x-ray technician job with Nomad Health, you must have an active ARRT certification, evidence of at least one year of Computed Tomography experience as a rad tech, and evidence of at least one year of experience within your speciality/modality within the last three years. You must have also graduated from an accredited school within your discipline, and score at least 80% on all Nomad competency assessments. We have a number of jobs to support different types of ARRT-issued certifications, including nuclear med techs, radiation therapists, and more.At Nomad, we want to give you the tools you need to succeed. Our Nomad Navigators are passionate about helping you get to the bedside as quickly and efficiently as possible. They can help you with your application, credentialing, and finding housing. Our Navigators have experience working with travel rad techs and can even help with on-the-job concerns if any arise while on assignment.In addition to real hands-on support, we have a benefits package that was explicitly built for traveling clinicians and includes a housing stipend, partial travel reimbursement, and major medical and dental plans available on your first day of work. We also have a 401(k) program with employer matching options, a user-friendly digital timekeeping process, and weekly direct deposits.With your Nomad Health account, you get access to our unique digital platform; a platform built to help you land your perfect assignment. Move your travel healthcare career forward and find your next job today.We are seeking experienced rad techs in a number of specialties to fill critical roles across the country: Cath Lab TechMRICT ScanDEXA ScanInterventional RadiologyFluoroscopy

Ready to jump-start your career and take charge of your earning potential At Platinum Supplemental Insurance, we’re looking for motivated individuals ready to learn, grow, and thrive in a fast-paced environment. Whether you’re a recent grad or simply seeking a fresh challenge, this is your chance to earn like a highly educated professionalour proven products and systems are your roadmap to becoming a top earner in sales. If you’re prepared to unlock your full potential, let us show you how to build a lucrative and rewarding future.Why Join Platinum Four-Day WorkweekTravel Monday–Thursday to meet with farmers and small business owners, then enjoy your weekends off. Say goodbye to the daily grind and hello to a work-life balance that lets you recharge and spend time on what matters most.Uncapped Earning PotentialThis is a commission-based role, and many of our new reps earn $75,000 or more in their first year, with top performers exceeding $100,000. The sky truly is the limit when it comes to your income.Ongoing Support & ResourcesFocus on building relationships and closing deals while Platinum handles marketing, recruiting, back-office support, and customer service. You’ll also benefit from generous bonuses, annual renewal income, and luxury travel incentives for high achievers.Cutting-Edge AI TrainingGet an edge on the competition with our new AI-driven training platform. You’ll receive personalized feedback, interactive coaching, and real-time support to help you master Platinum’s proven 10-step sales systemfaster and more confidently than ever before.Your Day-to-Day1. Travel to Your Territory: Meet potential customers (farmers, small business owners, and families) face-to-face to build trust and educate them about Platinum’s supplemental insurance solutions.2. Leverage Our 10-Step Sales Process: Follow a time-tested system that helps you identify prospects, deliver compelling presentations, and close more salesbacked by our powerful AI training.3. Stay Motivated & Collaborate: Work within a supportive, team-based culture that celebrates wins, shares best practices, and drives everyone to reach new heights.What You’ll EnjoyHigh Earning Potential, No Caps: Earn based on your performance and ambition, without hitting a salary ceiling.Residual Income: Benefit from ongoing earnings long after closing a sale, creating a steady income stream.Advancement Opportunities: Rise quickly through the ranks and take on leadership roles as you prove your abilities.Quarterly Vacations: Earn the chance to recharge on exciting getaways with fellow top performers.Company Trips & Events: Enjoy travel and experiences on usbring a significant other along, all expenses paid.Weekends Off: A Monday–Thursday work schedule means you get every weekend free for family time or relaxation.Who Thrives HereGo-Getters: You bring the hunger, discipline, and drive needed to excel in a commission-based environment.Clear Communicators: You can connect with people from various backgrounds, build trust, and explain concepts in a simple, relatable way.Continuous Learners: You’re excited to leverage AI-based training and mentorship to refine your skills and grow quickly.Flexible Travelers: You’re comfortable with overnight travel Monday–Thursday and are 18+ years old.Ready to Take the Leap If the idea of earning what you’re worth, mastering an innovative sales system, and enjoying a 4-day workweek excites you, we’d love to hear from you! Apply today and discover how Platinum can help you unlock a thriving career in sales.About PlatinumPlatinum Supplemental Insurance specializes in helping individuals, families, and businesses secure their financial futures through supplemental coverage. By bridging the gaps left by traditional health plans, Platinum’s products offer peace of mind when unexpected health issues arise. With a people-first mentality, robust training programs, and a commitment to growth, Platinum provides the ideal environment for sales professionals to excelno matter where they’re starting from.Join the Platinum team and see for yourself why so many have launched fulfilling, lucrative sales careers with us.