FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

SUMMARY: Assists in the implementation of procedures for quality assurance test and measurement programs. Conducts tests and inspections of a moderately complex nature.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.Assists in devising, revising, and implementing methods and procedures for inspecting, testing, and evaluating components and finished products.Maintains test and measurement equipment in proper calibration.Verifies specified requirements of samples by using micrometer, optical components, resistance meters, calipers, scales, microscopes and other equipment as required.Assists with qualification and testing programs by performing functional testing as directed by applicable specifications.Performs statistical analysis to assess costs, disposition, and propose corrective actions for non-conforming materials.Updates and distributes results of the quality reporting system.Maintains records concerning the processing of customer returns and corrective action correspondence.Trains and provides assistance to product inspectors.Performs special testing functions.Applies and maintains quality standards by use of internal facility audits.KNOWLEDGE, SKILLS, AND ABILITIESRequires knowledge typically acquired through:Completion of a High school diploma or general education degree (GED),One to three years of related experience or training; and/or equivalent combination of education and experience.Ability to read and interpret documents such as safety rules, blue prints, wiring diagrams, operating and maintenance instructions, and procedure manuals.Ability to write simple correspondence.Ability to effectively present information in one-on-one and small group situations.Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger, handle, or feel objects, tools, and controls, and reach with arms and hands. The employee may be required to occasionally lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.Individuals performing incoming and final inspection must meet minimum standards in at least one eye, corrected or uncorrected, of average or normal on a one time only color vision test and 20/25 on a 12 month near vision test.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.MN STATE POSTING REQUIREMENTSSALARY RANGE: $16/HR - $27/HR (depends on level of experience I, II, or III) BENEFITS DESCRIPTIONCompetitive wages for all team members paid weeklyEligible contributions to 401K at date of hire401K Roth Contributions & After-Tax ContributionsPaid Vacation, Holidays, and 1 additional Personal Day (Accrue at date of hire)Bonus Day(s) awarded annually based on company performance Paid Parental LeaveMedical, Dental and Vision BenefitsFlexible and Health Savings AccountsProfessional Development & TrainingTuition AssistanceCompany sponsored Life Insurance , Short-Term & Long -Term Disability, and Employee Assistance ProgramEmployee Referral Bonus Program[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Other duties may be assigned.· Studies blueprints of product and die or mold and computes specifications.· Plans sequence of operations, visualizing shape of die or mold in reverse of product.· Measures, marks and scribes metal stock to lay out for machining.· Gives machining specifications to Tool Machine Set Up Operators or sets up and operates machines such as vertical mill, engine lathe and CNC milling machine to machine outer dimensions and contoured cavity of die or mold.· Uses surface grinder to fit parts for assembly and to smooth and finish cavity.· Assembles die or mold. Verifies dimensions.· Examines standard or previously used dies or molds, tools, and jigs and fixtures, and recommends design modifications regarding construction and function of part.· Keeps an accurate record of maintenance performed on all tools.KNOWLEDGE, SKILLS, AND ABILITIES Requires knowledge typically acquired through:· Completion of a two year vocational, trade, or technical degree,· Two to five years of related experience or training; and/or equivalent combination of education and experience.· Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.· Ability to write routine reports and correspondence.· Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.· Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.· Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.· Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.· Knowledge of heat treating steels required.QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, talk, hear, walk, and use hands to finger or handle or feel objects, tools and controls, and reach with arms and hands. The employee may be required to regularly lift and/or move up to 10 pounds and frequently lift and/or move from 25 to 50 pounds. Specific vision abilities required by this job include close vision, depth perception and the ability to adjust focus.WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made while performing the essential job functions of this job. While performing the duties of this job, the employee regularly works near moving mechanical parts and is occasionally exposed to fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate to loud.MN STATE POSTING REQUIREMENTSSALARY RANGE: $20/hr - $39/hr (depends on level of experience I, II, or III)BENEFITS OVERVIEW Competitive wages for all team members paid weeklyEligible contributions to 401K at date of hire401K Roth Contributions & After-Tax ContributionsPaid Vacation, Holidays, and 1 additional Personal Day (Accrue at date of hire)Bonus Day(s) awarded annually based on company performancePaid Parental LeaveMedical, Dental and Vision BenefitsFlexible and Health Savings AccountsProfessional Development & TrainingTuition AssistanceCompany sponsored Life Insurance , Short-Term & Long -Term Disability, and Employee Assistance ProgramEmployee Referral Bonus ProgramITAR COMPLIANCE This position requires access to or use of information which is subject to the federal International Traffic in Arms Regulations (ITAR). All applicants for this position must be U.S. Persons within the meaning of ITAR. ITAR defines “U.S. Person” as U.S. citizen, lawful permanent resident of the U.S., person admitted as a refugee to the U.S., person granted asylum in the U.S., or person granted the status of alien lawfully admitted for temporary residence to the U.S. under 8 U.S.C. 1160(a) (for special agricultural workers) or 8 U.S.C. 1255(a)(1) (an amnesty program).[Equal Opportunity Employer - Disability/Vet]This job may require applicant to conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITARhere.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

COMPENSATION AND BENEFITS Dentist (DDS/DMD) Competitive annual salary; some hygienist experience helpsSign-on Bonus is available This location qualifies for State and Federal School Loan Assistance NHSC ProgramsExcellent benefits package, including 100% employer-match on 401K up to 4% RESPONSIBILITIES AND FACILITY DETAILS Dentist (DDS/DMD) Community Health Center setting -DentistryProviding Dental, Primary Care for a Community Health Center Perform routine treatment procedures: Digital X-Rays, Fillings, Extractions, some Root Canals, Dentures, Partials, Crowns, Treatment for gum disease and more!A patient-focused caseload Weekly Schedule: Four 10-hour shifts; No on-call and no WeekendsBilingual skills are a plus; strong interpersonal skills and ability to work independently or in a team environment QUALIFICATIONS AND SKILLS Dentist (DDS/DMD) New graduates and experienced candidates welcome Complete Training as a DDS or DMDHolds or can obtain a license in Minnesota as a DentistSeeking Dentist with a team-mentality approach and comfortable working in a diverse populationBilingual skills are a plus; ability to work independently or in a team environment COMMUNITY Dentist (DDS/DMD) An area renowned for its Walking, Biking and Skating Trails, Local Parks, Nearby Snow Ski Resort, Amphitheatre for events, Restaurants and Wine and Brewery and more!Our community offers experiences you would expect from a major-metro and the charm you can only get from a close-knit communityPer Bestplaces.net, this location is 14% less than the US average for cost of living; houses are 20% less expensive than the US National Average Live an hour from an international Airport in Minneapolis/St. Paul, MinnesotaPer Niche.com, this city school district has an overall rating of A- for Academics, Teachers, Clubs and Activities, and Sports REFERENCE NUMBER: 211303ABOUT DELTA PHYSICIAN PLACEMENT Delta Physician Placement (DPP), the permanent staffing division of The Delta Companies, identifies qualified Physicians, Advanced Practitioners, Allied Health, and Therapist on behalf of healthcare facilities nationwide. A single point of contact assists you with coordinating communication with the hiring manager, negotiating contractual details, and coordinating any necessary travel.The company has been recognized with several Best of Staffing® Awards. Visit www.deltaplacement.comfor more information.

RAYUS now offers DailyPay! Work today, get paid today!The pay range for this position is $13.60-$19.67 based on direct and relevant experience. RAYUS Radiology is looking for a Technologists Assistantto join our team. As a Technologists Assistant, you will provides assistance to technologists in areas that allow technologist to maintain an on-time schedule and run the scanning area in an orderly fashion.This is a casual position working various shifts between 8:00am-8:00pm, flexible schedule. ESSENTIAL DUTIES AND RESPONSIBILITIES: (70%) Technologist Assistance Monitors MRI, CT, arthrogram and x-ray schedulesAdjusts patients schedule when necessary and keeping all techs informed of any changesGreets and escorts patients to changing room; briefly explains procedurePrepares patient jackets and compiles films putting them together in appropriate jacket according to date and numberAssists technologists in room set up between patients, including putting proper coil on table, putting previous coil away and changing table sheetHelps the technologist stay on time by having the next patient ready before the current patient is ready to get off the tableRestores and networks all previous exams for next day's returning patients (20%) Cleaning & Organization Stocks and cleans work and control areas and MRI room(s)Ensures that all MRI patient areas are stocked and organized in a neat and tidy mannerCleans and stocks patient prep room and patient restroomStocks linen and empties laundry at the end of the nightOrganizes and cleans supply closet and computer roomsOrganizes radiologist reading area after radiologist has left for the dayChecks with MRI technologists, Medical Records and/or Front Office for additional duties as needed (10%) Performs other duties as assigned

RAYUS now offers DailyPay! Work today, get paid today! The pay range for this position is $30.00-$50.06 based on direct and relevant experience. There is a $5,000 relocation or sign-on bonus for this position!RAYUS Radiology is looking for an MRI Technologistto join our team. As an MRI Technologist, you will operate your assigned scanner(s) to produce images of the patient's body for diagnostic purposes. Taking a patient centered approach, you will provide MRI services within professional standards and with excellent customer service. Each patient comes to our centers looking for answers. You will guide patients through this sometimes difficult process by kindly talking them through the steps and answering their questions and concerns regarding exam procedures and process.This is a fulltime position (option to work part-time 30-39 hours/week, 0.8 or 0.9 status) working Monday-Friday with shifts between 9:30am-6:00pm and 1:30pm-10:00pm, includes rotating Saturdays (no call!). This role can also work three 12-hour shifts, typically 8am-8pm or 9am-9pm for more work/life balance. Willing to train in MRI! ESSENTIAL DUTIES AND RESPONSIBILITIES: (90%) Patient MRI Imaging Screens patient before exam for any precautions or contradictions pertaining to examination, using two patient identifiers to ensure correct patient and procedureExplains and prepares patients for MRI procedures that will be performed, explaining the procedure, positioning patients so that the parts of the body can be appropriatelyPerforms routine and advanced MRI procedures on designated portions of the body for use by physicians in the diagnosing and treating of patient illness and/or injury with minimal amount of supervision or repeats scanned, while providing patient support by talking to patients throughout procedureAdjusts MRI scan parameters correctly and as neededMaintains positive attitude and working relationships with radiologist, referring customers and other associates and peersFollows physicians' orders precisely and conforms to safety regulations to protect yourself, your patients, and coworkersAccurately maintains patient records within Radiology Information System (RIS)Maintains an orderly and clean work area promoting good safety habits for patients and co-workersMaintains ACR toolkit and accreditation requirementsMaintains equipment in good working order; cleans and disinfects equipment after each useEnsures compliance with all HIPAA guidelines (5%) MRI Department Support Assists with maintaining an updated imaging protocol manual and software upgradesMonitors medical supply inventory and requests supplies as necessaryAssists with training of new associates, providing resource and technical expertise, as applicable (5%) Completes other tasks as assigned