Kearney, MO 64060 • (12.9 miles) • Full Time • $26.00 to $36.00 / hr • 10/19/2026

Safely operate, repair, rebuild and perform maintenance on Company owned or leased heavy duty diesel trucks and equipment including rolling stock to ensure its ability to operate safely Location: 7801 E Truman Road Kansas City MO Pay Rate: $26-$36/hr. More pay available based on experience, certifications, and skill level. Hours / Shift: 3pm-1130pm M-F. Immediate OT after 40hrs worked. About the Role We are seeking an experienced Diesel Mechanic to maintain and repair our waste and recycling fleet. In this role, you will perform routine maintenance, diagnostics, and major repairs on refuse trucks (rear loaders, side loaders, front loaders, and roll-offs) to ensure safe and reliable operations. Key Responsibilities Perform preventative maintenance (PMs), inspections, and repairs on diesel e

Liberty, MO 64087 • (19 miles) • Full Time • 10/22/2026

Company: US3270 Sygma Kansas City (The Sygma Network, Inc) Sales Territory: None Zip Code: 64153 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors JOB SUMMARY To assist fleet technicians in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to perform diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections

Kansas City, KS 66101 • (33.9 miles) • Full Time • 10/18/2026

Job Description General Motors has a need for qualified Mechanical Journeypersons (P ipefitters ). You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: Experience with planned maintenance systems and predictive technologies Experience with industrial robotics, automation, and conveyance systems Primary Responsibilities: Follow established safety procedures according to OSHA standards and company procedures Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps

St Joseph, MO 64504 • (32.7 miles) • Full Time • 9/28/2026

Schedule Monday- Friday 5am-1:30pm Your Impact at Lowe's As a maintenance Mechanic II, you play an important role in keeping our distribution center operational. By quickly and independently fixing equipment issues in different areas, you'll help maintain a seamless flow of goods and keep our supply chain running. Your adaptable skills, combined with the ability to guide others, directly contribute to the overall efficiency of our distribution center teams. Your impact is not just about repairs – it's about creating a safe and productive environment for your fellow team members. With your seasoned expertise and leadership, you'll also mentor other mechanics and utility team members, ensuring our workforce is equipped with the knowledge and skills necessary to excel in their roles. How We S

Kansas City, MO 64106 • (33.6 miles) • Full Time • 10/18/2026

Description Brinks Home™ is a leader in the smart security industr y , protecting over one million people across the U.S., Canada, and Puerto Rico. Our platinum-grade protection is backed by award-winning customer service and expertly trained professionals. We strive for the highest standards for our customers while fostering a positive work environment for our employees . We create a culture that fosters innovation, celebrates creativity, and encourages authenticity. Join us and be part of a collaborative team that is relentless in our pursuit of security for life. Position Overview: We are currently seeking a determined Alarm Service Technician who embodies our core values: Service, Accountability, Customer Focus, Growth, and Integrity. The Alarm Service Technician is a hands-on ro

Chillicothe, MO 64601 • (44.7 miles) • Full Time • 10/18/2026

Position Summary The Maintenance Technician is responsible for performing preventative, predictive, and corrective maintenance on manufacturing equipment throughout the New IBC Blow Molding and Reconditioning operations. This position plays a critical role in minimizing equipment downtime, maximizing production efficiency, and ensuring the safe and reliable operation of all plant equipment. The Maintenance Technician is expected to troubleshoot and repair mechanical, electrical, hydraulic, pneumatic, and automated systems while maintaining compliance with all company safety policies and regulatory requirements. Essential Duties & Responsibilities Equipment Maintenance Perform preventative, predictive, and corrective maintenance on production equipment according to established maintenance s

Kansas City, MO 64101 • (34.2 miles) • Full Time • 10/23/2026

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. Title: Installation Technician II Position Description: We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. As an Installation Technician, you will be responsible for provid

Kansas City, MO 64106 • (33.6 miles) • Full Time • 10/18/2026

We’re building a world of health around every individual — shaping a more connected, convenient and compassionate health experience. At CVS Health®, you’ll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger – helping to simplify health care one person, one family and one community at a time. Position Summary Join #TeamCVS and play an important part in delivering the kind of service that keeps our customers coming back to CVS Pharmacy. You’ll work alongside other dedicated individuals in a fast-paced warehouse environment that inspires you to grow your skills and advance your career. • Full-time position

Saint Joseph, MO 64503 • (30.7 miles) • Full Time • 10/27/2026

Maintenance Mechanic Technician Put your mechanical expertise to work in a fast-paced manufacturing environment where every day brings a new challengeand your skills keep production moving. Position Snapshot A Mechanical Technician is commonly expected to know how to install, maintain, troubleshoot, and repair industrial mechanical systems and mechanical components of industrial machinery and equipment. You will be expected to fabricate parts required during overhaul, maintenance, or set-up, and perform routine maintenance work on machinery. You will be expected to fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances. You will work daily to ensure assigned areas of responsibility operate with risk lowered to As Low As Reasonably Achieva

Kansas City, MO 64123 • (31.9 miles) • Part Time • $25.00 to $30.00 / hr • 10/27/2026

Benefits: Competitive salary Employee discounts Opportunity for advancement Start at $25/hr | Growth & Commission Opportunities After Proven Performance Join a Skilled & Professional Team at Reimagine Resources Reimagine Resources is a values-driven fitness resources services company offering facility consultation, gym design, installation, repair, maintenance, asset management, and related support to commercial spaces across the US. We are looking for a reliable, skilled installer and service professional who can work independently from the beginning with limited training, thrive in a professional and structured environment, and align with our company values of integrity, problem-solving, ownership, and service. Why This Job is More Than Just a Paycheck At Reimagine Resources, hard work,

Kansas City, KS 66111 • (40.8 miles) • Full Time • $23.00 to $43.00 / hr • 10/27/2026

Geis Utility Trailer offers a great opportunity to start or build your career! A New Technician Toolkit Program is available to entry or apprentice-level technicians. Utility Trailer Sales of Kansas City is seeking qualified technicians and entry-level technicians to work in our 18-bay shop in Kansas City, KS. We are a dealer for Utility Trailers, Clement Trailers, and Trailstar. We offer complete repairs on dry van trailers, refrigerated trailers, flatbeds, and end dump trailers. Geis Utility Trailer Sales of Kansas City is locally owned and operated by Geis Dealer Group – Peterbilt and Utility Trailer. Experienced applicants must be capable of making quality repairs to the suspension, lighting /electrical system, air brake and ABS systems, steel and aluminum welding, and trailer body/str

Saint Joseph, MO 64501 • (31.2 miles) • Full Time • $80,000 to $90,000 / yr • 10/27/2026

Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job Summary We are seeking a Heavy Machine Operator to join our team! As a Heavy Machine Operator, you will work behind the wheel operating a variety of heavy machinery and equipment, following all safety guidelines and job specifications to ensure projects are completed both safely and on time. You will also perform and record regular maintenance for your equipment, report any defects or issues immediately, and keep equipment in good, clean working order. The ideal candidate has all the necessary licensing to operate heavy machinery, works well in a team environment, and maintains the highest safety standards. Responsibilities Safely operate a variety of large, heavy machinery safely, such as e

Independence, MO • (32.1 miles) • Full Time • 10/27/2026

Construction Quality Control System Manager - Lake City Microgrid and CHP LC-ERP-08 | Lake City Microgrid and CHP | Awarded project recruiting WORK LOCATION: On site in Independence during assigned field work; pre-mobilization coordination may be remote REQUISITION: LC-ERP-08 DUTY LOCATION: Lake City Army Ammunition Plant, Independence, Missouri REPORTS TO: ERP Project Manager with independent QC escalation to ERP leadership EMPLOYMENT: ERP full-time, project-based position CSS CAM LCAT: 253 - Principal Technical Manager (provisional classification) PLANNED OPENINGS: 1 REQUIREMENT BASIS: Project execution and staffing plan; qualifications verified against assigned work About ERP and the Project Energy Resilience Partners, LLC (ERP) is a tribally led SBA 8(a) federal contractor advancing en

Blue Springs, MO 64015 • (36.7 miles) • Full Time • $30.00 to $46.00 / hr • 10/27/2026

Benefits: 401(k) matching Bonus based on performance Competitive salary Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Benefits Include Bonus Potential Paid transportation of your tools to our shops Tool/Tuition Reimbursement Opportunity for Continued Career Growth Fast Paced Friendly Team Environment Health/Dental/Vision 401(k) Paid Time Off Paid Training Weekly Pay Nationally Branded Auto Repair Center is looking for the Most Important Part of Our Business, GREAT people to join our team! We believe you can take us to the next level, and we can do the same for you. We have built a business that challenges the norm, rewards excellence, and provides a comfortable life for all of us. We are

Grain Valley, MO 64029 • (38.1 miles) • Full Time • 10/27/2026

Experienced HVAC Service Technician- Immediate Hire Are you looking for steady work with a company that has a solid reputation? Do you take pride in your work and always do your best? Then we want to hear from you! Apex Heating & Air Conditioning, Inc. is an Equal Opportunity Employer that is seeking a full-time Experienced Service Technician that is detail-oriented and has the drive to get the work done. Qualifications : Must have a clean driving record, valid driver’s license, and an EPA certification. Background and drug screen checks are required. Must live within the KCMO Metro area. Experience of at least 2 years is required. Apex offers benefit packages that include: health, dental, life insurance, disability insurance and a great retirement plan with a company contribution. We prov

Kansas City, MO 64151 • (28.3 miles) • Full Time • 10/27/2026

JOB TITLE: General Automotive Technician/R&R Technician Summary: This position is primarily responsible to service a broad range of vehicle repair issues to ensure proper performance and safety of vehicles and for quickly identifying the cause of performance problems. ESSENTIAL DUTIES AND RESPONSIBILITIES: Inspect, diagnose and repair vehicle automotive systems Remove and Reinstall Transmission systems Assist other technicians in performing technical activities Explain problems discovered during vehicle inspection to service writers and technicians Continuously learn new technical information, equipment, tools and repair techniques Professionally record findings so that repairs costs are accurately estimated Performs other duties as assigned. QUALIFICATIONS: To perform this job successfull

Kansas City, MO 64116 • (30.8 miles) • Full Time • $58,000 to $67,000 / yr • 10/27/2026

Salary: $58k - 67k per year + none Reference: AB_5122777 Electro-Mechanical Machine Technician/Machine Electrician Shift: 1st (7am- 3:30pm) | Pay: $28-32/hr (doe) Employment Type: Full-Time Position Summary We are seeking an experienced Industrial Machine Electricianto build, wire, test, and troubleshoot electrical control systems for automated machinery at our facility. This role covers the complete electrical build lifecycle: control panel layout and wiring, machine-level conduit routing, and 220V–480V 3-phase power distribution. Key Responsibilities Panel Assembly & Wiring: Lay out, mount, and wire industrial control panels from electrical schematics, drawings, and BOMs. Mount circuit breakers, power supplies, contactors, overloads, transformers, VFDs, servo drives, PLCs, and safety rel

Kansas City, MO • (31.9 miles) • Full Time • $45.00 to $75.00 / hr • 10/27/2026

Cullerton Group is seeking an experienced Mechanical Design Engineer to support a leading manufacturer of specialty trucks, cranes, and heavy equipment. This opportunity focuses on the design and development of mechanical components, welded steel structures, fabricated assemblies, and truck-mounted machinery. The ideal candidate will have strong hands-on mechanical design experience, proficiency in 3D CAD software, and a solid understanding of manufacturing and fabrication processes. Key Responsibilities Design and develop mechanical components, welded steel structures, frames, and fabricated assemblies. Create detailed 3D CAD models, engineering drawings, and manufacturing specifications. Design mechanical systems and support integration of hydraulic components and lifting equipment. Appl

Kansas City, MO 64161 • (27.7 miles) • Full Time • 10/25/2026

Heavy Repairs Mechanic – PRS Auto Terminal (Kansas City, MO) Full-Time Recession-Proof Secure Career at the Norfolk Southern Kansas City Facility Ready to put your mechanical skills to work on some of the biggest, toughest machines on rails? Join a powerhouse team that's essential to America's transportation backbonekeeping thousands of railcars hauling freight and vehicles across the country safe, reliable, and rolling strong. This isn't just a jobit's a chance to master high-level structural and mechanical repairs on auto-rack and freight railcars , dive deep into underframe, draft systems, running gear, and air brakes, and become the go-to expert who ensures these giants stay in top shape. No above-deck prep herejust pure, hands-on heavy repairs that demand precision, skill, and pride i

Independence, MO 64055 • (34.8 miles) • Full Time • 10/25/2026

Looking for experienced or entry level tech. Pay depends on experience. We will train the right person! Job is located in Independence, MO near 435 and I-70. Mon-Sat Day Shift A Wheel & Tire Technician is responsible for the installation of Custom Wheels & Tires which includes but is not limited to: Dismounting, mounting and balancing of tires and wheels sold. The Technician will also be responsible for general shop duties as assigned. A tire Technician must have the desire to perform above and beyond the requirements set forth in this job description and willingness to learn the trade. Job Qualifications: Prior knowledge of tire related equipment and tools a plus. General Automotive knowledge. Lift up to 50lbs. Essential Job Functions: Properly follow instructions. Lift vehicle without da

Riverside, MO 64150 • (30.8 miles) • Full Time • $19.00 / hr • 10/25/2026

Morning Shift! Full-time! Benefits! Become an Employee-Owner! HOW YOU WILL MAKE A DIFFERENCE As an employee-owner in the Fill Plant, this role will focus on inspecting and sorting gas cylinders returned by customers. The inspected/sorted cylinders are then placed into production to be refilled or tested based on the inspection. This role is also responsible for assisting customers and drivers with cylinder orders and cylinder loading as needed. Please note: the permanent shift will be 5:30am-1pm, M-F CK SUPPLY CORE VALUES: Please read slowly these are non-negotiables and we are going to ask you about them in the interview! Driven - Hardworking, Dedicated, Dependable, Desire to be the Best Passionate - Positive Attitude, Appearance, Pride, Love What We Do People-Oriented - Honest, Respectfu

Kansas City, MO • (31.9 miles) • Full Time • $24.00 to $25.00 / hr • 10/25/2026

The Service Technician Support, Level 2 is an Intermediate / Journey Level maintenance technician. This position performs a broad range of complex repairs with minimal supervision. Primary focus is on core maintenance, troubleshooting, and intermediate repairs. KEY RESPONSIBILITIES Diagnosing and repairing HVAC units, household appliances (fridges, stoves, dishwashers), and electrical systems Performing a range of plumbing repairs, such as repairing faucets, toilets, and drains Handling "make-ready" duties and inspecting vacant units for rent-readiness Providing technical direction to Level 1 staff Participating in on-call rotations for after-hours emergencies General grounds maintenance and repairs, such as cleaning common areas and assisting with trash removal, curb painting, etc. Follow

Kansas City, MO • (31.9 miles) • Full Time • 10/25/2026

Do you thrive at the intersection of technical expertise and relationship driven selling? At Groundworks, North America's leader in foundation solutions, our Service Technicians are trusted advisorscombining handson knowledge with consultative sales skills to deliver real solutions that protect our customers’ homes. You’ll meet homeowners face to face, assess their needs, present proven systems, and earn steady pay andcommissions while doing work you can stand behind . Backed by industryleading training, advanced tools, and the strength of a national brand, this role is built for motivated professionals who want ownership of their success and a clear path for growth. The Service Technician is an integral part of the customer journey post installation. They focus on partnering with customer

Shawnee, KS 66203 • (41.8 miles) • Full Time • $1,000 to $1,200 / wk • 10/25/2026

The Automotive Service Manager oversees service operations for a used car lot, supervising six mechanics and coordinating mechanical repairs, pre-sale inspections, and mixed service activities. Reporting to the dealership owner, this role manages customer service, parts ordering, scheduling, and repair workflows using spreadsheets and manual records. The schedule is 9:00 a.m. to 6:00 p.m., five days per week, with a half day on Saturday. Responsibilities Supervise and coordinate the work of six mechanics. Schedule service appointments and manage daily repair operations. Order parts and coordinate inventory needs. Provide customer service and make service recommendations. Prepare repair estimates and manage work orders. Perform quality control on completed repairs and pre-sale inspections.

North Kansas City, MO • (31.1 miles) • Full Time • 10/24/2026

Quick Lube Technician Location: Oakes KIA | North Kansas City, MO Schedule: Full-Time Compensation: $18 - $25 per hour based off experience About the Role The Quick Lube Technician is responsible for performing routine vehicle maintenance services while supporting service department efficiency, repair quality, and customer satisfaction. This role is ideal for someone who enjoys hands-on work, thrives in a fast-paced environment, and is interested in building a long-term career within the automotive industry. Established in 2010, Oakes Auto Group is family-owned and locally operated, with a culture built around stability, growth, and long-term career development Pay & Benefits Competitive pay based on experience Health, dental, and vision insurance 401(k) with company match Paid time off +

Kansas City, MO • (31.9 miles) • Full Time • 10/24/2026

Quick Lube Technician Location: Oakes GMC | Kansas City, MO Schedule: Full-Time Compensation: $18 - $25 per hour based off experience About the Role The Quick Lube Technician is responsible for performing routine vehicle maintenance services while supporting service department efficiency, repair quality, and customer satisfaction. This role is ideal for someone who enjoys hands-on work, thrives in a fast-paced environment, and is interested in building a long-term career within the automotive industry. Established in 2010, Oakes Auto Group is family-owned and locally operated, with a culture built around stability, growth, and long-term career development Pay & Benefits Competitive pay based on experience Health, dental, and vision insurance 401(k) with company match Paid time off + paid h

Lee's Summit, MO 64064 • (39.3 miles) • Full Time • $30.00 to $45.00 / hr • 10/24/2026

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary fu

Kansas City, MO 64125-1327 • (31.9 miles) • Full Time • 10/24/2026

Description: Scrap Management Industries inc. is looking for a skilled Diesel Mechanic to maintain and repair our fleet of heavy-duty trucks and trailers. Our company runs a high-volume freight operation, and we rely on professional mechanics to keep our trucks DOT-compliant, road-ready, and running at peak performance. If you're experienced with heavy-duty trucks, enjoy a fast-paced shop, with a self-directed workflow, and take pride in your work, this role is for you. Duties/Responsibilities: Inspect, diagnose, and repair diesel engines, drivetrains, brakes, suspension, and trailer systems Perform routine maintenance, including PMs, oil changes, tire checks, and brake services Utilize diagnostic tools (Cummins Insite, Noregon, etc.) to troubleshoot issues and complete repairs Conduct DOT

Kansas City, MO • (31.9 miles) • Full Time • $30.00 to $35.00 / hr • 10/24/2026

We are a small local trucking company with 5 trucks in our fleet. We have a heated and cooled shop, looking for a full time mechanic. Qualifications: High School or equivalent Experience with on-the-job training or diploma in vehicle maintenance from vocational or trade school a plus. Valid driver’s license required Possess customer service & computer skills. Ability to read & understand repair manuals Ability to multitask & work as a team Must possess the tools required to accomplish the essential job results required. We are a DOT sensitive organization, and all candidates must submit to a pre-employment Drug screen (Urine/Hair), physical, and lifetime background Check. Marijuana is a disqualification of employment. Mechanic Responsibilities: Perform preventative maintenance on equipment

Kansas City, MO 64153 • (28.5 miles) • Full Time • $22.00 to $40.00 / hr • 10/24/2026

Position Description: Title: A&P Mechanic in Engine Shop Status: Full Time Department: JMT Organizations Summary: Reporting directly to the Engine Shop Manager, the Engine Shop A&P Mechanic is directly responsible for troubleshooting, repair, disassembly, and service of aircraft, components, and engine systems. This position will perform maintenance, disassembly, rework, repair, replacement, re-assembly, and adjustments of various aircraft systems and structures in compliance with technical specifications, engineering instructions and FAA regulations with a focus on safety and quality. Essential Duties and Responsibilities included, but not limited to: Maintain all aircraft, components, and systems as assigned in compliance with specifications and FAA regulations Inspect and certify Engine

Riverside, MO 64150 • (30.8 miles) • Full Time • $19.00 to $35.00 / hr • 10/24/2026

At Mobile Air & Power Rentals , we provide innovative cooling, heating, dehumidification, and power solutions for our customers nationwide. We rent out a vast array of equipment, including portable air conditioners, chillers, heaters, and generators, helping clients save time and money while enhancing their operations and memorable events. We are immediately hiring Travel Service Technicians to join our dynamic team, all levels available starting at Entry Level up to Senior Technicians. These positions require at least 60% out-of-town travel. For higher level technicians, experience working on generators is strongly preferred. Why Mobile Air? Here are some of the perks & rewards: Full-time positions with overtime opportunities Competitive hourly pay with quarterly bonus Strong Travel Incen

Kansas City, MO 64108 • (35.1 miles) • Full Time • $39.86 / hr • 10/24/2026

WORK IN A HEATED GARAGE!!! General Qualifications: Thecandidate must be physically active, industrious, and work safely. Must be able to work well with others. Must be conscientious about the work with the average amount of interest in the progress of the Authority and the protection of its property. Must be physically and mentally capable of performing all the duties as a Class A Mechanic. Job requires a consistently good record of attendance and punctuality. Qualifications Required: Must have knowledge of coach or truck mechanical and electrical maintenance and repair work, and be able to show five years of experience in heavy duty diesel, automotive equipment or aviation/marine repair and maintenance as a journey level mechanic, witha background of actual heavy automotive work experienc

Independence, MO 64050 • (30.5 miles) • Full Time • $18.00 / hr • 10/24/2026

Benefits: varies by location Locally owned and operated Career Advancement Opportunities Employee discounts 401(k) Dental insurance Health insurance Paid time off Vision insurance Minimum Qualifications: Stihl "Silver Certification" and be able to produce it upon hiring. * 2 years Stihl mechanic experience. * 2 years retail store customer service experience. Salary: Negotiable, dependent upon Stihl certification level and experience. You might be a great fit if You enjoy serving others as we would like to be served. Making the best even better. You enjoy making a difference in your community. You enjoy helping others. You enjoy working in teams. You enjoy decorating and design. You enjoy being creative. Job Summary: The primary role of the Stihl Power Equipment Specialist is to process all

Riverside, MO 64150 • (30.8 miles) • Full Time • 10/24/2026

Shift Opportunities Available: Night Shift: 7:00 PM to 7:00 AM on a rotating 2-2-3 schedule Preventative Maintenance: Monday through Friday, 8-hour night shifts Why Join Premium Waters? At Premium Waters, we are committed to creating an inclusive workplace where employees feel valued, respected, and empowered to succeed. We believe that diverse perspectives strengthen our teams, drive innovation, and help us deliver exceptional results for our customers. Benefits & Perks We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including: Medical, Prescription Drug, Vision, and Dental Coverage starting on Day One 112 Hours of PTO in Your First Year Paid Parental Leave Gym Reimbursement Program Company-Paid Wellness Coaching Virt

Riverside, MO 64150 • (30.8 miles) • Full Time • 10/24/2026

FORCE America, Inc. is looking to fill an opening for a Mechanical/Hydraulic Inside Sales Specialist . This role, located in person at our Riverside, MO location, will provide customer support by responding to inquiries, requests for quotes as well as answer basic questions on systems we provide. This person will also build relationships with customers, provide technical support and troubleshooting, negotiates with customers and coordinates with our Outside Sales Team members. FORCE America provides systems and components to the on-and off-highway mobile markets. FORCE America is 100% employee-owned and has a strong presence in the market for over 70 years. We provide a competitive salary and excellent benefits. Essential Responsibilities: Partners with assigned customer base to provide pr

Kansas City, MO • (31.9 miles) • Full Time • $18.00 to $20.00 / hr • 10/24/2026

Overnight Fleet TechnicianKeep Our Fleet Moving While the City Sleeps. At zTrip, reliable transportation starts with reliable vehicles. We're looking for a skilled and dependable Overnight Fleet Technician to help maintain and repair our fleet during overnight hours, ensuring vehicles are safe, road-ready, and prepared for the next day of service. If you enjoy diagnosing problems, working with your hands, and taking pride in quality workmanship, this is an excellent opportunity to build a long-term career with a growing transportation company. Benefits Competitive Pay Based on Experience Medical, Dental, Vision, and Life Insurance Paid Time Off (PTO) Paid Holidays 401(k) with Company Match Annual Tool Allowance Ongoing Training and Professional Development Career Advancement Opportunities

Kansas City, MO • (31.9 miles) • Full Time • $20.00 to $22.00 / hr • 10/24/2026

POSITION SUMMARY Provide for the company the installation and removal of commercial and domestic washer and dryers as well as maintains a customer base by providing excellent customer service. To respond to service calls as promptly as possible; and strive for no later than next day service. Perform necessary service in a quality manner promptly and efficiently. Visually inspect machines and correct any deficiencies. CORE RESPONSIBILITIES • Perform all duties as assigned by manager/supervisor. • Review all service tickets for routes assigned. • Ensure all necessary service van inventory is stocked and accounted for. • Maintain petty cash to cover all refunds and unanticipated developments. • Complete work order and service ticket for each machine worked on and turned into receipt box each

Kansas City, MO • (31.9 miles) • Full Time • 10/24/2026

Van Chevrolet/Cadillac is seeking experienced General Motors Automotive Technicians to join our growing, high-volume service team. We invest in our technicians and provide long-term career growth in a stable, well-managed dealership environment. If you’re looking to increase your earning potential, work with strong leadership, and stay consistently busy in a modern shop, this is the opportunity for you. We’ve experienced strong month-over-month growth for the past six months and show no signs of slowing down. As part of Berkshire Hathaway Automotive , one of the largest automotive groups in the country, we offer cutting-edge technology, excellent support, and long-term stability. We are also one of only two Cadillac dealerships in the Kansas City metro , ensuring steady work year-round. We

Kansas City, KS 66115 • (31.9 miles) • Full Time • $18.00 to $25.00 / hr • 10/24/2026

SUMMARY The POS Field Service Technician is accountable to ensure timely response to all service requests for customer sites in their assigned territory. Overall responsibility includes ensuring customer needs for any POS hardware, as well as additional hardware, issues that are reported are responded to, and the appropriate troubleshooting, diagnostics, repair, and thorough testing are completed. Additional hardware may include laser printers, meat scales, and wrappers, network equipment, etc. The POS Field Service Technician is responsible to maintain current accurate spare parts/equipment inventory, as well as very strong emphasis on timely and accurate documentation and records. RESPONSIBILITIES Someone in this position at TRUNO will: Respond to all service requests timely, keep custom

Independence, MO • (32.1 miles) • Full Time • 10/24/2026

We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As an Experienced Auto Technician, you will perform a full range of automotive repairsfrom light maintenance to heavy engine workand diagnostics on our vehicles, including: Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work. Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles. Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores. At

Kansas City, MO 64108 • (35.1 miles) • Full Time • 10/24/2026

Process Mechanical Engineer WHO WE ARE: Jedson Engineering is an Engineering Consultancy headquartered in Cincinnati, OH. We provide full-service engineering, procurement and construction management services to industrial process manufacturers that operate in pulp & paper, chemical, consumer products, power, heavy industrial, and food & beverage markets. We are in a significant growth mode and it’s an exciting time to be joining our business! WHAT YOU’LL BE DOING: In this position, you’ll join a dynamic engineering team in the execution of client projects. This person will execute process designs primarily within the consumer products industry that includes the investigation and analysis of data to make sound process design decisions aligned with company, client, and project objectives. Yo