***This role is eligible for a sign-on bonus!***Aircraft Technician Sr A&Pin GAC St. LouisUnique Skills:Must be able to wear fall restraint and must be able to work from a scissor lift.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221313Posting Type: Internal-ExternalDepartment: J2293-Compl PaintCategory: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 11/08/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Upholstery Technician Srin GAC St. LouisUnique Skills:.Education and Experience RequirementsHigh School Diploma or GED required. 4 years experience in upholstery to include two (2) years aircraft upholstery experience or 6 years commercial upholstery experience. Advanced knowledge of upholstery and sewing processes and products and/or advance carpet knowledge including being able to install custom carpets. Position Purpose:Work independently to design, fabricate, and install upholstery and trim items in aircraft interiors. Assist Shop Lead by overseeing projects and providing guidance and direction to co-workers. Mentor and train other Upholstery Technicians.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Fabricate and install seat covers, curtains and various assemblies and subassemblies. Interpret material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements. Sew, fabricate, and install covers for all styles of panels in the aircraft interior while meeting safety, quality, and productivity standards and goals. Use the material tracking system, Corridor, to create parts demand, track squawks and to sign-off work. Work with design/drawings to cut and install advanced custom design carpets with unique patterns.Additional Functions: Accept Lead responsibilities when needed. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. . Conduct safety audits and assists team members in doing safety audits. . Assist in maintaining shop equipment and associated JSAs. . Comply with and champion Safety, 5S, and housekeeping policies and ensure the protection of aircraft interiors (PTP). . Mentor and train lesser skilled technicians and monitor their work to ensure they complete assigned tasks in accordance with required. levels of safety, quality and productivity. . Work with Lead and higher skilled technicians to develop and implement process improvements reduce material cost, cycle time, and labor hours using Lean Six-Sigma tools. .Perform other duties as assigned.Other Requirements: Possess a working knowledge of Gulfstream inspection and process specifications and terminology. The ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221221Posting Type: Internal-ExternalDepartment: J2294-Comp UpholsteryCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N9Number of Openings: 1Posting End Date: 08/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

Aircraft Technician Iin GAC St. Louis$3,000 Sign on bonus EligibleUnique Skills:***Multiple Shifts available***Able to work in a team environment, knowledge of Gulfstreams preferred.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate or 2 years of aviation maintenance experience. . Valid Driver’s License required. Position Purpose:The Aircraft Technician I, under close supervision, performs or assists with inspection, maintenance, and repair of basic aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform basic aircraft inspections, repairs, and modifications under close supervision. Assist with movement of aircraft as required. Properly complete CMP cards, work order sign-offs, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic power units, hydraulic lift platforms, forklifts, compressed gas cylinders, etc.) . Ensure all customer property is properly protected.Additional Functions: Use material tracking system to create parts demand, and to charge labor to Work Orders, items, and squawks. . Properly collect and dispose of waste fuel, oil, hydraulic and de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address and report unsafe conditions before putting people or property at risk. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 219805Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/06/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Interior Installer Technician Iin GAC St. LouisUnique Skills:***Multiple Shifts available***Experience with hand tools and competency with computers preferred.Education and Experience RequirementsHigh School Diploma or GED required. Applicable installation, fabrication or related experience or trade school preferred. . Position Purpose:The Interior Installation Technician I works under close supervision to remove and install and/or fabricate aircraft interiors by using company operating procedures and quality standards.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform aircraft removal, installation, and/or fabrication of aircraft interiors (galleys, closet, lavatories, side ledges, bulkheads, doors and vanity ledge fill panels). Coordinate with supervision and Inspection to ensure compliance with Repair Station procedures, internal and FAA paperwork, sign-offs and quality specifications. Specific fit and installation tasks are to be completed in compliance with work order instructions and specifications. Use the material tracking system to create parts demand, track squawks and to sign off paperwork. Follow standard operating procedures when using tools and equipment such as hand tools, band saws, shears, sanders and brakes. Properly care for and maintain shop equipment and tools. Comply with safety, 5S, and housekeeping policies and use personal protective equipment as required. Address unsafe conditions before putting people or property at risk.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand the English language. Able to work any shift. Able to climb ladders and stairs, work in small restricted areas, and lift up to 40 pounds. Must be computer literate. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222391Category: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/04/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2023 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

***This role is eligible for a sign-on bonus!***Upholstery Technician 1in GAC St. LouisUnique Skills:.Education and Experience RequirementsHigh School Diploma or GED required. Entry level position. preferred. Experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades is preferred. Position Purpose:Under moderate supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specificationsJob DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform technical upholstery functions within design, customer, FAA, and Gulfstream specifications. Specific installation and trim tasks are to be completed in compliance with work order instructions and specifications. Fit panels and windows, cabin head liners, upper sidewalls, lower side panels, hatch panels, windows, cut and surge carpets, cover bulkheads, fabricate various metal parts, and covering and installation of panels. Create carpet patterns per design drawings and complete installation. Use the material tracking system to create parts demand, track squawks and to sign-off work.Perform other duties as assigned.Other Requirements: Ability to read, write, speak, and understand proficiently the English language. Ability to read and interpret blueprints and engineering documentation. Ability to use measuring tools and perform basic math computations. Must be computer literate. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223616Posting Type: Internal-ExternalDepartment: J2294-Comp UpholsteryCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N6Number of Openings: 1Posting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***Avionics Installer Iin GAC St. LouisUnique Skills:Experience with wire routing, termination, and ring out.Education and Experience RequirementsHigh School Diploma or GED required. Entry level position. Six (6) months accredited schooling in aviation electronics or general electrical experience preferred. General knowledge of applicable regulatory requirements and customer specifications. Must know how to use a multimeter. Position Purpose:Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. Assists with the completion of tasks within allotted time frame. Assists with maintaining required. logs and records. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: Properly care for and maintain shop equipment and tools as assigned by Supervisor. .Perform other duties as assigned.Other Requirements: Technical Certificate in aircraft electrical assembly preferred. and/or successful completion in current year youth apprenticeship program sponsored by Gulfstream, in area of expertise. Ability to read and interpret basic blueprints and schematic diagrams. Strong written and verbal skills required. Computer skills and general software knowledge necessary. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223040Posting Type: Internal-ExternalDepartment: J2302-STL Compl Advanced TCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N7Number of Openings: 2Posting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

Structural Mechanic IVin GAC St. Louis$15,000 Sign On Bonus EligibleUnique Skills:The applicant must have extensive sheet metal structural experience, be able to read and understand engineering sheet metal structural drawings, and be familar with sheet metal structural tooling.Multiple shifts are available for this position.Education and Experience RequirementsHigh School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred.. Q-stamp preferred. Position Purpose:In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Check all work and ensure a defect free assembly prior to final inspection . Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . Support Lean Activities, comply with all safety, 5S, and housekeeping policies.Perform other duties as assigned.Other Requirements: Good working knowledge of computers and related software. Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. Must be able to work any shift. Must be able to lift 50 lbs. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223770Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/05/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

***This role is eligible for a sign-on bonus!***CNC Technician Iin GAC St. LouisUnique Skills:NAEducation and Experience RequirementsHigh School Diploma or GED required. Entry level position. Experience in automated machine environment/CNC preferred. . Position Purpose:Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Under supervision, operate automated machine using existing programs. Remove/replace cutting tools and offsets as required. Inspect condition of tools and replace as needed. Inspect cut material/part prior to CNC operation to ensure conformity and compliance with blueprints, models, and/or engineering documents. Identify material and appropriate cutting tools. Set up material and inspect for serviceability.Additional Functions: Monitor material supply. . Validate preventative maintenance and minor repairs on machines. Alert maintenance of any repair/preventative issues. . Maintain a clean and safe work environment . Comply with 5S and Environmental, Health and Safety requirements. .Perform other duties as assigned.Additional InformationRequisition Number: 222694Posting Type: Internal-ExternalDepartment: J2291-Compl CabinetCategory: OperationsPercentage of Travel: NoneShift: FirstEmployment Type: Full-timeSalary Grade:N7Number of Openings: 1Posting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1

***This role is eligible for a sign-on bonus!***CNC Technician IIin GAC St. LouisUnique Skills:Weekend shiftEducation and Experience RequirementsHigh School Diploma or GED required. 2 years of related experience or education to include one (1) year experience with similar automated equipment. . Position Purpose:Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Operate automated machine using existing programs. Test program and ensure machine is set up in accordance with drawings. Remove and/or replace cutting tools and offsets as required. Inspect condition of tools and replace as needed. Manipulate programs to fit inserts into material, ensuring fit and conformity. Inspect cut material/part prior to CNC operation to ensure conformity and compliance with blueprints, models, and/or engineering documents. Identify material and appropriate cutting tools. Set up material and inspect for serviceability.Additional Functions: Monitor material supply. . Validate preventative maintenance and minor repairs on machines. . Complete paperwork and other documents as required. . Maintain a clean and safe work environment . Comply with 5S and Environmental, Health and Safety requirements. .Perform other duties as assigned.Additional InformationRequisition Number: 223502Posting Type: Internal-ExternalDepartment: J2291-Compl CabinetCategory: OperationsPercentage of Travel: NoneShift: Weekend DaysEmployment Type: Full-timeSalary Grade:N8Number of Openings: 1Posting End Date: 11/29/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-RF1