We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

Overview: Sheetz Store Support is hiringEquipment Service Techniciansto join our World Class maintenance team. Our technicians maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

Job LocationBrown SummitJob DescriptionPosition Location: Browns Summit, North Carolina - Greensboro Browns Summit PlantJob Summary:The Senior Electrical and & Instrumentation Technician is responsible for enabling production throughput, reducing equipment downtime, troubleshooting issues, eliminating defects, and building technical mastery. They are a subject-matter expert in a specific technology, and they are capable of covering multiple areas during their shift. As the skills increase, they are capable supporting improvements and capital projects with the goal of delivering the best product, at the lowest cost, with the highest quality, and in a safe environment. In general, this role will be focused on electrical technical mastery in order to successfully troubleshoot problems and to proactively improve production systems.As a Senior Electrical and Instrumentation Technician you will be responsible for the following:Maintaining and troubleshooting high-speed packing, making, and facilities power & controls equipment.Collaborate with Operating and Project Teams to eliminate losses and improve electrical systems.Performing preventive maintenance and calibrations on equipmentTroubleshooting, monitoring, & programming PLC, SCADA, and HMI systemsTroubleshooting and monitoring variable frequency drives, servo control systems, roboticsTroubleshooting and repairing machine and process control equipmentAnalyzing trends and technical data to gain insights of the controls and identify issues proactivelyBuilding technical skills in othersApply electrical technical skills to support business.Acquire Low Voltage Qualification (up to 1,000V).Utilize tools to eliminate defects and improve systems (UPS, Y-Y, failure analysis, etc.).Be knowledgeable on the electrical systems on equipment in order to effectively troubleshoot issues and lead improvement projects.Be involved in all planned maintenance downtime events.Capable of advanced programming, set-up and configuration of electrical components (VFD’s, PLC’s, Servos, Flow Meters, Pressure Meters, communications, etc.).Conduct electrical troubleshooting (hardware and software) in support of Operating TeamsProactively monitor and maintain electrical field devices and power systems (execute PM’s, CIL’s, replace in-kind, calibrations, etc.).Execute electrical Maintenance Planning task.Demonstrate computer aptitude- acquire basic programming, set-up, and configuration of electrical components (VFD’s, servos, PLC’s, scales, communications, etc.)Interface with vendors, suppliers, or on-site construction teams.Job QualificationsMinimum of a high school diploma/GED & 2-year technical degree/certification in Industrial Electrical or related field7+ years of related experienceBe 18 years of age or olderPreferred Qualifications:Associate degree in electrical engineering or related fieldApplied electrical and controls skills in an industrial environmentKnowledge and practical application with some of the following technology areas: PLC’s, HMI’s, process instrumentation, machine control systems, variable frequency drives (PowerFlex, etc.), servo drives, robotics, power distribution (Strong technical troubleshooting, problem-solving, issue resolution, and root cause analysis for industrial electrical issuesCapable of using PLC program navigation for troubleshootingAble to read and use electrical schematics and single-line drawingsAble to use electrical troubleshooting tools for measurements and analysisExperience with a regulated industry, such as Food, Cosmetic, or Drug for knowledge of GMP compliance is a plus.Role model electrical safety in ALL aspects of your workSelf-directed and motivated; have a sense of urgency and bias for action to deliver needed resultsWhat we offer:Responsibilities as of Day 1 - you will feel the ownership of your work from the beginning, and you will be given specific ownership areas and responsibilities.Continuous mentorship - you will work with passionate people and receive formal training as well as day-to-day mentoring from your manager. Work and be part of a dynamic and encouraging environment - working over a diverse array of interesting problems.Promote agility and work/life effectiveness and your long-term well-being.Get a competitive salary and benefits package.Just So You Know:The Greensboro Browns Summit Procter & Gamble Plant operates 7-days per week. Technicians work any day of the week, including weekends. Work on weekends may be as overtime or as part of the Technician's normal schedule. Changes in business volume and production requirements can cause the plant to occasionally change the length of work shifts or the rotation schedule. The hours of work vary from 8 to 12 hours per day. Shift rotations vary from working a single straight shift to working two or three rotating shifts. Technicians are expected to be willing to rotate and to work any shift. Additional days could be required to be worked as overtime.We are committed to providing equal opportunities in employment. We value diversity and do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.All will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability status, age, sexual orientation, gender identity and expression, marital status, citizenship, HIV/AIDS status or any other legally protected factor.Immigration sponsorships not available for this position, except in rare situations based on Procter & Gamble's sole discretion. Applicants for U.S. based positions are eligible to work in the U.S. without the need for current or future sponsorship. We do not sponsor for permanent residency. Any exceptions are based on the Company's specific business needs at the time and place of recruitment as well as the particular qualifications of the individual.Procter & Gamble participates in e-verify as required by law.Qualified individuals will not be disadvantaged based on being unemployed.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.Job ScheduleFull timeJob NumberR000113238Job SegmentationPlant Technicians (Job Segmentation)Starting Pay / Salary Range$40.92 / hour

***** This posting is part of our ongoing effort to identify qualified candidates for future opportunities. While we may not be hiring immediately, we encourage you to submit your application for consideration when a position becomes available. *****Welcome to Mobile Auto Solutions (MAS)!MAS is seeking skilledAutomotive ADAS Technicians to join our growing team! Our technicians are the face of the company. This role comprises customer interaction, vehicle testing and repair, invoice generation, inventory control and service vehicle maintenance. Don’t miss out on an opportunity to grow with us!Salary: $60,000 - $95,000 a year, Depending on experience.Schedule: Full-Time Monday to Friday 8-5 pmWhy choose to work at MAS Competitive Pay PlansMedical, Prescription Drug, Dental & Vision Insurance effective your first day401(k) Retirement Plan with company matchEmployer Paid Short-Term Disability & Life InsurancePaid Vacation & HolidaysPet insuranceContinuing Education OpportunitiesOpportunities for advancementResponsibilities include but are not limited to:Determines testing and analysis by communicating with shop representatives and reviews all estimates for repairPerforms diagnostic testing, programming, ADAS calibrations and analysisPerforms wiring repairsAdvises shop of needed repairsKeeps inventory of stock, communicating with support staff for needed orders and verifying order receiptsWrites, prints and emails service invoicesCollects signature or payment for work performedDelivers completed invoices and payments to office in orderly manorKeeps shop equipment operating by following operating instructions, troubleshoots breakdowns; maintains supplies; performs preventative maintenance; advises management of repairs; keeps Google Drive up to dateCollaborates with teammates according to PPT guidelines to schedule/complete jobsOther duties as assignedQualifications include but are not limited to:Knowledge of OE scan toolsAbility to learn new tools as neededKnowledge of wiring repair proceduresAbility to service A/C systemsPossesses diagnostic skills in the automotive tradeBasic computer knowledge including using email, spreadsheet and messaging systemsWilling and able to update job knowledge by participating in educational opportunities, reading technical publications and the likeMust possess high school degree or GED equivalent4-10 years related service technician experience requiredMAS is proud to be an equal-opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract.Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice.The physical demands of your job must be met to perform the job's essential functions successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the job.Compensation Details$60,000 - $95,000 / Yearly

Req ID:454669Address: 2103 Barnes Street Reidsville, NC, 27320Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Additionally, you'll assist your manager in maintaining smooth operations to swiftly serve our customers. Your dedication significantly contributes to our customers' satisfaction and desire to return. No experience No problem! We will teach you!Job Functions:This is a customer-facing position with general customer service duties including, but not limited to, providing assistance, resolving issues, and ensuring a positive customer experience.Assisting store, restaurant, and truck care departments with general cleaning, maintenance, stocking, and customer service needs.Use of various tools and equipment to clean and maintain the overall facility operations to include, but not limited to, equipment repair and maintenance (HVAC systems, fuel systems, service trucks, refrigeration systems, etc.), pressure washing, plumbing repair, site inspections, and other assigned duties.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

As a Mechanical Lead Supervisor for the Particle Board Department, the mission is to provide leadership andtechnical expertise to ensure the smooth operation of machinery and equipment. Do you like managing a team of up to 6-10 people This is a hands on Mechanical Lead role and will include managing maintenance, troubleshooting, and optimizing production processes to maximize efficiency and quality.Additionally, the supervisor is responsible for fostering a culture of safety, innovation, and continuousimprovement, while also collaborating with cross-functional teams to achieve production targets and upholdindustry standards. Through strategic leadership and technical acumen, the supervisor plays a pivotal role indriving the department towards operational excellence and sustainable growth.JOB FUNCTIONS: Job functions include but are not limited to the following. Supervise and maintain records of all mechanical work carried out within their area of responsibility. Create and implement strategic directions for reliability and maintenance of plant. Train and oversee employees, inspect work, assign tasks, drive vehicles, and take disciplinary actionswhen needed. Create, implement and monitor work processes to achieve business objectives in terms of OperatingAsset Utilization. Maintain Critical Spare parts list and designated inventory. Determine the need for outside resources. Provide out-of-hours support as required. On-call duty within the Mechanical on-call plan. Respond to mill breakdowns in a timely and effective manner and work closely with different areaoperators to resolve maintenance related issues. Investigate root causes of equipment failures and make recommendations for long term fixes. Help develop PMs. Other duties as assigned.BACKGROUND / EXPERIENCE: Experience implementing best maintenance practices excellent operations. Proven ability to read blueprints, CAD drawings, sketches, written instructions and interpret data. Metric System proficiency. Ability to work independently and within a team.SKILLS: LeadershipSCHEDULE DEMANDS: Schedule is 8-hour M-F, Monday – Thursday 7a-4pm, Friday 7am-1pm. assignment, however,employee must be willing to work alternate schedules occasionally; that may include early mornings,nights, and/or weekends and be punctual while doing so. Occasional overnight travel to include flying, driving, riding or by rail.PHYSICAL DEMANDS: Standing or walking for extended periods of time up to 8-hours. Lifting or carrying up to 50 lbs. Manual dexterity using maintenance tools and power tools. Climbing ladders and elevated platforms. Reading computer screen or other electronic devices. Use of various office hand and electrical tools or equipment.Excellent comp, benefits, and continual training and education, will provide some relo. Let's talk!

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns.Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for:High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Valid driver’s license and a safe driving record are required. Knowledgeable in maintenance equipment.Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment test to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Primary Duties Effectively troubleshoot & repair equipment and adhere to maintenance documentation requirementsDisassemble machinery and equipment to remove parts and make repairs.Repair and maintain the operating condition of industrial production and processing machinery and equipment.Examine parts for defects such as breakage and excessive wear.Reassemble equipment after completion of inspections, testing, or repairs.Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices.Clean, lubricate, and adjust parts, equipment, and machinery.Must be able to frequently lift 50lbs.Record repairs and maintenance performed.Cut and weld metal to repair broken parts, fabricate new parts, and assemble new equipment. Requirements 5+ years’ experience working in maintenance field in a manufacturing environment Experience servicing flexographic printing presses and blown film extruders is a plus. Ability to work overtime as needed Experience in a production, manufacturing, or warehouse environment under maintenance required HVAC experience preferred Must be able to read a multimeter Basic knowledge of motor control circuits and VFDS Basic knowledge pneumatic and hydraulic controls Basic computer skills Ability to stand constantly, excellent hand-eye coordination skills, strong mechanical skills and the ability to lift and load weights up to 50 pounds Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Do you like to work with your hands or tinker If you want to be part of a team and help produce items essential to everyday life this is the position for you! Our pay and benefits are competitive along with 11 paid holidays and a great wellness program. This is a fantastic opportunity to leverage your production, manufacturing, or warehouse experience and learn valuable niche skills that are in high demand, plus earn great pay and outstanding benefits! The safety and health of our team is our top priority. ProAmpac has taken great steps to provide all personal protective equipment and sanitizing supplies to create a safe and healthy work environment for you. You will never be bored in this fast paced, safety-oriented, and mentally challenging environment. Be part of a fast growing and stable industry where you can actually see and touch the finished product you made. Take pride knowing your work is on the shelves in retail stores and restaurants across the country! Major Function: The Extrusion Line Operator controls and monitors the film production of his or her designated line(s). Oversees the quality, housekeeping, and safety of the designated extrusion line(s). Maintains clear communication with all Plant Department in an effort to produce quality base film. Primary Duties: Verifies current production blend is consistent with the control blend.Monitors film treatment; opacities, surface defects, edge weave, and ensures smooth slitted edges on film rolls.Records and monitors gauge profiles across the entire film web.Ensures film rolls are consistently wound within specific roll hardness/variance tolerances.Accurately fills out appropriate production/downtime paperwork. Notice: This position is subject to both preemployment and post-employment (random) drug testing. Additionally, we will conduct drug and alcohol testing in cases of reasonable suspicion and post-accident as deemed necessary.Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesThe contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c)

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Trailer Mechanic will perform preventative maintenance on UPS Transportation Trailers and Converter Dollies.? Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems.? The ideal candidate will possess the following:Current documented trailer mechanic experienceExperience using diagnostic equipment, scan tools and personal computerPossess a full complement of personal hand toolsResponsibilities & Duties:Meet D.O.T requirementsBend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workdayReport to work on a regular and timely basis and complete the scheduled workday on a consistent basisAbility to work varying shifts, additional hours and/or overtime depending on service needsSitting required infrequently throughout the duration of the workdayLift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 poundsAssist in moving packages or equipment up to 150 poundsSimple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasksOperate standard/manual transmissionOperate power, pneumatic toolsRequired to wear personal protective equipmentWork in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weatherHave a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions.Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $37.75 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

Job LocationGREENSBORO BROWN SUMMIT PLANTJob Description&G is the largest consumer packaged goods company in the world. We have operations in over 75 countries, with 65 trusted brands that improve lives for 5 billion consumers worldwide. This brings many advantages, including the opportunity for our employees to enjoy a diverse and rewarding lifelong career filled with new and exciting challenges.Job Summary:The Electrical and & Instrumentation Technician is responsible for leading the electrical systems, performing advance troubleshooting of hardware and software to support the production of a quality product in a safe environment. They are a subject-matter expert in a specific technology, and they are capable of covering multiple areas during their shift. As the skills increase, they are capable supporting improvements and capital projects. In general, this role includes working on electrical items, projects, improvements, training, and supporting the shift team, as needed.The Greensboro Browns Summit Procter & Gamble Plant operates 7-days per week. Technicians work any day of the week, including weekends. Work on weekends may be as overtime or as part of the Technician's normal schedule. Changes in business volume and production requirements can cause the plant to occasionally change the length of work shifts or the rotation schedule. The hours of work vary from 8 to 12 hours per day. Shift rotations vary from working a single straight shift to working two or three rotating shifts. Technicians are expected to be willing to rotate and to work any shift. Additional days could be required to be worked as overtime.As an Electrical and Instrumentation Technician you will be responsible for the following:Collaborate with Operating and Project Teams to eliminate losses and improve electrical systems.Participate / Lead sustainability efforts to reduce costs (electricity, water & natural gas) to deliver sustainability goals.Coach and develop other technicians to build electrical and operating skills within the department.Deliver stretching business results through application of electrical technology mastery.Maintain site electrical PPE and test equipment (strike down, gloves, etc.)Maintain Utilities devices calibrations.Apply electrical technical skills to support business.Acquire Low Voltage Qualification (up to 1,000V).Utilize tools to eliminate defects and improve systems (UPS, Y-Y, failure analysis, etc.).Be knowledgeable on the electrical systems on equipment in order to effectively troubleshoot issues and lead improvement projects.Be involved in all planned maintenance downtime events.Capable of advanced programming, set-up and configuration of electrical components (VFD’s, PLC’s, Flow Meters, Pressure Meters, communications, etc.).Conduct electrical troubleshooting (hardware and software) in support of Operating TeamsProactively monitor and maintain electrical field devices and power systems (execute PM’s, CIL’s, replace in-kind, calibrations, etc.).Execute electrical Maintenance Planning task.Demonstrate computer aptitude- acquire basic programming, set-up, and configuration of electrical components (VFD’s, servos, PLC’s, scales, communications, etc.)Interface with vendors, suppliers, or on-site construction teams.Job QualificationsAssociate degree in electrical engineering or related field and/or 4+ years or related experience.Be 18 years of age or olderHave a high school diploma, GED or equivalent educationPreferred Qualifications:Experience with operations and/or process equipment.Background in Rockwell hardware and software systems.Ability to troubleshoot problems using PLC’s, HMI’s, drawings, and electrical documentation.Demonstrated problem solving capability and deductive reasoningExperience with a regulated industry, such as Food, Cosmetic, or Drug for knowledge of GMP compliance is a plus.Role model electrical safety in ALL aspects of your workSelf-directed and motivated; have a sense of urgency and bias for action to deliver needed resultsWhat we offer:Responsibilities as of Day 1 - you will feel the ownership of your work from the beginning, and you will be given specific ownership areas and responsibilities.Continuous mentorship - you will work with passionate people and receive formal training as well as day-to-day mentoring from your manager. Work and be part of a dynamic and encouraging environment - working over a diverse array of interesting problems.Promote agility and work/life effectiveness and your long-term well-being.Get a competitive salary and benefits package.Just So You Know:We are committed to providing equal opportunities in employment. We value diversity and do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.All will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability status, age, sexual orientation, gender identity and expression, marital status, citizenship, HIV/AIDS status or any other legally protected factor.Immigration sponsorships not available for this position, except in rare situations based on Procter & Gamble's sole discretion. Applicants for U.S. based positions are eligible to work in the U.S. without the need for current or future sponsorship. We do not sponsor for permanent residency. Any exceptions are based on the Company's specific business needs at the time and place of recruitment as well as the particular qualifications of the individual.Procter & Gamble participates in e-verify as required by law.Qualified individuals will not be disadvantaged based on being unemployed.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.Job ScheduleFull timeJob NumberR000118336Job SegmentationPlant Technicians (Job Segmentation)Starting Pay / Salary Range$29.32 / hour

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

OverviewWho we areToyota Manufacturing is looking to develop new innovative solutions to support the future of mobility, and values being a member of a local and global community. We offer an inclusive team environment that values “respect for people” and we are a company with a rich history and an exciting future to pursue your professional dreams. Along with great pay, amazing benefits, and a stable work environment – Toyota Manufacturing has it all.To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position currently.What we offer Starting hourly rate of $31.00 - $43.50 per hour based on experience and skill level.Paid holidays and paid time off.Excellent health care & wellness plans for your immediate family.Professional development & growth, as well as tuition reimbursement.Work environment built on teamwork and respect.Who we’re looking forToyota’s Maintenance Departments are looking for passionate and highly motivated Team Members to support the safety, quality, production, and cost goals of the manufacturing operation. Maintenance Team Members play a critical role in the success of our Maintenance Teams at Toyota.What you’ll be doingAs a Facilities Maintenance Team MemberSupporting daily operations and maintenance for Plant utility and building systems – Power, chilled water, compressed air, HVAC, dust collection equipment, and Tank Farm & Pumps.ORAs an Industrial Maintenance Team MemberSupporting daily operations and maintenance for Plant processing equipment, the equipment utilized to make the products.What you bringIndustrial and/or Facilities Maintenance or related Military experience.Demonstrated success in troubleshooting and problem-solving.Available to work any shift including overtime, holidays, weekends, and shutdowns.Computer skills (Microsoft Suite, Maximo/CMMS, etc.).Technical skills and knowledge in any of the following areas: PLC's, Computers & Information Technology, Hydraulic/Pneumatic, Motion/Motor Control, Welding and Machining.Ability to work outside when needed.Added bonus if you have:Degree in Industrial Maintenance, Electrical Systems, Industrial Automation.Experience or Certifications in HVAC, Low & Medium voltage power or Chemical systems.Experience or Certifications in Reliability Centered Maintenance and/or Condition Based Monitoring techniques.Knowledge of battery; cell/module; or similar experience in a highly automated production environment.Experience within industrial processing (example: PLC programming, controls, IoT data collection / storage / analysis, mechanical precision, vision system, robot maintenance, etc.).Experience with predictive maintenance through condition monitoring (for example: vibration analysis, oil analysis, thermography, current analysis, etc.).Knowledge or experience with Lean Manufacturing principles (Shop Organization, Visualization, Problem Solving).Knowledge or experience with Reliability Techniques: FMEA, RCM, etc.What we’ll bringDuring your interview process, our team can fill you in on all the details of our industry-leading benefits and career development opportunities. A few highlights include:A work environment built on teamwork, flexibility, and respect.Professional growth and development programs to help advance your career, as well as tuition reimbursement.Team Member Vehicle Purchase Discount.Toyota Team Member Lease Vehicle Program (if applicable)Comprehensive health care and wellness plans for your entire family.Toyota 401(k) Savings Plan featuring a company match, as well as an annual retirement contribution from Toyota regardless of whether you contribute.Paid holidays and paid time off.Referral services related to prenatal services, adoption, childcare, schools and more.Belonging at ToyotaOur success begins and ends with our people. We embrace diverse perspectives and value unique human experiences. Respect for all is our North Star. Toyota is proud to have 10+ different Business Partnering Groups across 100 different North American chapter locations that support team members’ efforts to dream, do and grow without questioning that they belong. As a company that has been one of DiversityInc’s Top 50 Companies for Diversity and a member of The Billion Dollar Roundtable supporting minority and woman-owned suppliers for over 10 years, we are proud to be an equal opportunity employer that celebrates the diversity of the communities where we live and do business.Applicants for our positions are considered without regard to race, ethnicity, national origin, sex, sexual orientation, gender identity or expression, age, disability, religion, military or veteran status, or any other characteristics protected by law.Have a question or need assistance with your application Check out the How to Applysection of ourcareers page on Toyota.com or send an email to .

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "

" POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1 ext. 2862 or by sending an email to . "Requirements: Skilled understanding of repairing Guitars Preferences:Foundational product knowledge on Guitar Center products "