Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Clean Energy & Fueling, Imaging & Identification, Pumps & Process Solutions and Climate & Sustainable Technologies. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com. Position Summary: Reporting directly to the Dover Director of Advanced Manufacturing Machining, the Advanced Manufacturing Machining Manager is responsible for executing the manufacturing roadmap for optimizing machining processes, proper use of the equipment, design specifications, setup reviews, and new control strategies. AMME is responsible to lead and ensure that new equipment purchases are specified, sourced, qualified, and properly transitioned into mass production, meeting Dover and customer requirements and timing.Essential Duties and Responsibilities:Support and partner with OpCo to drive improving OEE through initiatives such as SMED, TPM, etc. for new and existing equipment. Work on Dover corporate strategy to work with OpCo to drive productivity by internalizing spend (Buy2Make) on new capex and existing equipment by maximizing machine utilization. Lead SMED Events - Lead Site CNC technology Assessments – Project Manage Site improvement activitiesSupport and partner with OpCo to support on maturity journey for the Machining Excellence Playbook. Provide technical development and deployment for new technologies related to machining to drive productivity improvements.Drive and support machining strategy on productivity improvement by maximizing asset utilization.Assist in the evolution of the equipment and perform acceptance evaluation accordingly.Identify, recommend, procure, and install machine shop equipment as well as ensure all equipment is thoroughly maintained and calibratedSupport workforce utilization, space requirements, workflow, and design layout of equipment and workspace for maximum efficiency.Continuously improve, provide recommendation on upgrade of equipment to maximize asset utilization.Interface with tooling supplier to ensure use of proper tooling for production. Work with suppliers to develop better cutting tools for specific PM applications.Develop machining capability in-house while making changes to enhance the machine functionality.Identify, develop, and deploy new machining methods (or refine existing) to improve quality, reduce cost, and optimize build scheduleUtilize lean manufacturing methodology for process development and problem solvingPerform root cause analyses when non-conformances are identified and deploy corrective actionsHelping and supporting manufacturing, to achieve safety, quality, efficiency and throughput goals, identifying opportunities to improve.Apply Project Management skills & tools to lead and support capital equipment/improvement projects.Investigate equipment performance and identify any problems for corrective actions and solutions.Writes/revises User Requirement Specs, Functional Requirement, Design Specs, Qualifications, etc.Supports Factory and Site Acceptance Tests, Machinability Studies, and validation protocols.Responsible for review and approve PFMEA, DFMEA, PPAPs, and Standard Operating Procedures SOP and ensure that manufacturing and operations comply with. Utilize continuous improvement methodology to improve internal processes.Must be able to interact constructively across the whole organization to identify issues and implement improvements.Hands-on support of new products and new process launches.Must be able to handle multiple projects and multiple priorities simultaneously.Travel up to 70% may be required. Ability to perform other duties as assigned.Qualifications/Requirements/Desired Characteristics:Bachelor’s degree in mechanical, electrical, or manufacturing engineering, industrial technology, or equivalent mix of education and experience.Minimum five (5) years’ experience in manufacturing engineering directly working with machining processes.Experience setting up and operating state-of-the-art machining equipment.Extensive experience in machining and maintenance. Well-versed in standard machine shop manufacturing processes and setupsStrong experience with SolidWorks or another mechanical CAD systemHighly experienced with a variety of precision conventional and advanced metrology systems (photogrammetry, CMMs, 3D imaging)Strong commitment to proper safety precautions in design and practiceStrong understanding of Lean concepts.Excellent interpersonal and influencing skills to interact with other departments.Ability to multi-task and perform in a dynamic environmentStrong sense of urgency, accountability and highly objective orientedHighly organized and efficient in approaching tasks, a self-starter with the ability to problem-solve.Clear, concise, and articulate communication skills - verbal, written, and listening.Strong team player, work ethic, and commitment to win the right way.Strong analytical skills, ability to think big, act small, and scale fast.Key Accomplishments – Previous 12 MonthsDemonstrated experience in successfully achieving machining startups.Proven experience developing/starting new manufacturing processesDemonstrated experience improving productivity by machining optimizationDemonstrated experience improving OEE. And proven reduction in unplanned maintenance hoursDemonstrated experience utilizing Advanced Product Quality Planning Methodology and the integrated product and process development techniques within it. (e.g., Process Flow Diagrams, PFMEA, Control Plans, I/PPAP, Standard Work).Proven success managing medium and large-scale projects from concept development through successful implementation.Work Arrangement : HybridSalary Range : - We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Job Function : Engineering#LI-MG1

Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Clean Energy & Fueling, Imaging & Identification, Pumps & Process Solutions and Climate & Sustainable Technologies. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 60 years, our team of approximately 24,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com. Position Summary: Reporting directly to the Dover Director of Advanced Manufacturing Machining, the Advanced Manufacturing Machining Manager is responsible for executing the manufacturing roadmap for optimizing machining processes, proper use of the equipment, design specifications, setup reviews, and new control strategies. AMME is responsible to lead and ensure that new equipment purchases are specified, sourced, qualified, and properly transitioned into mass production, meeting Dover and customer requirements and timing.Essential Duties and Responsibilities:Support and partner with OpCo to drive improving OEE through initiatives such as SMED, TPM, etc. for new and existing equipment. Work on Dover corporate strategy to work with OpCo to drive productivity by internalizing spend (Buy2Make) on new capex and existing equipment by maximizing machine utilization. Lead SMED Events - Lead Site CNC technology Assessments – Project Manage Site improvement activitiesSupport and partner with OpCo to support on maturity journey for the Machining Excellence Playbook. Provide technical development and deployment for new technologies related to machining to drive productivity improvements.Drive and support machining strategy on productivity improvement by maximizing asset utilization.Assist in the evolution of the equipment and perform acceptance evaluation accordingly.Identify, recommend, procure, and install machine shop equipment as well as ensure all equipment is thoroughly maintained and calibratedSupport workforce utilization, space requirements, workflow, and design layout of equipment and workspace for maximum efficiency.Continuously improve, provide recommendation on upgrade of equipment to maximize asset utilization.Interface with tooling supplier to ensure use of proper tooling for production. Work with suppliers to develop better cutting tools for specific PM applications.Develop machining capability in-house while making changes to enhance the machine functionality.Identify, develop, and deploy new machining methods (or refine existing) to improve quality, reduce cost, and optimize build scheduleUtilize lean manufacturing methodology for process development and problem solvingPerform root cause analyses when non-conformances are identified and deploy corrective actionsHelping and supporting manufacturing, to achieve safety, quality, efficiency and throughput goals, identifying opportunities to improve.Apply Project Management skills & tools to lead and support capital equipment/improvement projects.Investigate equipment performance and identify any problems for corrective actions and solutions.Writes/revises User Requirement Specs, Functional Requirement, Design Specs, Qualifications, etc.Supports Factory and Site Acceptance Tests, Machinability Studies, and validation protocols.Responsible for review and approve PFMEA, DFMEA, PPAPs, and Standard Operating Procedures SOP and ensure that manufacturing and operations comply with. Utilize continuous improvement methodology to improve internal processes.Must be able to interact constructively across the whole organization to identify issues and implement improvements.Hands-on support of new products and new process launches.Must be able to handle multiple projects and multiple priorities simultaneously.Travel up to 70% may be required. Ability to perform other duties as assigned.Qualifications/Requirements/Desired Characteristics:Bachelor’s degree in mechanical, electrical, or manufacturing engineering, industrial technology, or equivalent mix of education and experience.Minimum five (5) years’ experience in manufacturing engineering directly working with machining processes.Experience setting up and operating state-of-the-art machining equipment.Extensive experience in machining and maintenance. Well-versed in standard machine shop manufacturing processes and setupsStrong experience with SolidWorks or another mechanical CAD systemHighly experienced with a variety of precision conventional and advanced metrology systems (photogrammetry, CMMs, 3D imaging)Strong commitment to proper safety precautions in design and practiceStrong understanding of Lean concepts.Excellent interpersonal and influencing skills to interact with other departments.Ability to multi-task and perform in a dynamic environmentStrong sense of urgency, accountability and highly objective orientedHighly organized and efficient in approaching tasks, a self-starter with the ability to problem-solve.Clear, concise, and articulate communication skills - verbal, written, and listening.Strong team player, work ethic, and commitment to win the right way.Strong analytical skills, ability to think big, act small, and scale fast.Key Accomplishments – Previous 12 MonthsDemonstrated experience in successfully achieving machining startups.Proven experience developing/starting new manufacturing processesDemonstrated experience improving productivity by machining optimizationDemonstrated experience improving OEE. And proven reduction in unplanned maintenance hoursDemonstrated experience utilizing Advanced Product Quality Planning Methodology and the integrated product and process development techniques within it. (e.g., Process Flow Diagrams, PFMEA, Control Plans, I/PPAP, Standard Work).Proven success managing medium and large-scale projects from concept development through successful implementation.Work Arrangement : HybridSalary Range : - We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Job Function : Engineering#LI-MG1

We are looking for experienced Traffic Control Technicians to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Requirements: Valid Driver’s License with clean MVR 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer Minority/Female/Disability/Veteran

Overview: Physical Therapists, Come Where You Can Grow and Progress In Your Career!Location: GreensboroNorth Carolina Licensed Physical Therapist “BreakThrough has opened upso many opportunities for me. I have been able to do residencies, fellowships, management and leadership courses, and there is no limit to success.” - Drew Schlabach, PT, DPT, OCSJob Type: Full-timePay: $70,000 to $100,000 / YearSign-on Bonus: Up to $10,000 sign-on bonus available.Compensation will be based on experience. How Confluent Health Supports You: Student loan repayment programFully paid trainings, certifications and education programs through Evidence in Motion (EIM) A focus to create a diverse, equitable, and inclusive workplace culture Comprehensive mentorship and career development Leadership and talent development opportunities Generous Paid Time Off Industry leading Medical, Dental, Vision, LTD insurances 401(k) Employer Matching Family Building and Parental Benefits You’ll achieve success by: Reviewing patients medical history Diagnosing patients by observing their movements and listening to their concerns Developing individualized treatment plans for patients with clear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injury Recording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in State of North Carolina is required.CPR and first aid certification required Who We Are:BreakThrough Physical Therapy is a member of the Confluent Health family of outpatient physical and occupational therapy companies that is transforming healthcare by developing and educating today’s highly effective clinicians and by providing them with career development pathways to become industry leaders.BreakThrough Physical Therapy is a member of the Confluent Health family of physical and occupational therapy companies. Together, we are transforming healthcare by strengthening private practices and developing highly effective clinicians all across the country. Confluent Health and BreakThrough Physical Therapyprovides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Confluent Health and BreakThrough Physical Therapycomplies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Experienced and newly graduated Physical Therapists Apply Today!EOE#CH500

Overview: North Carolina Licensed Physical TherapistThis is a full-time floater position serving the Greensboro, NC area, including Winston-Salem, Greensboro, High Point, and Burlington.“BreakThroughhas opened up so many opportunities for me. I have been able to do residencies, fellowships, management and leadership courses, and there is no limit to where you can go if you know what you want to do.” - Drew Schlabach, PT, DPT, OCSJob Type: Full-timePay: $70,000 to $100,000 / YearSign-on Bonus: Up to $10,000 sign-on bonus available.Compensation will be based on experience. How Confluent Health Supports You: Student loan repayment programFully paid trainings, certifications and education programs through Evidence in Motion (EIM) A focus to create a diverse, equitable, and inclusive workplace culture Comprehensive mentorship and career development Leadership and talent development opportunities Generous Paid Time Off Industry leading Medical, Dental, Vision, LTD insurances 401(k) Employer Matching Family Building and Parental Benefits You’ll achieve success by: Reviewing patientsmedical history Diagnosing patients by observing their movements and listening to their concerns Developing individualized treatment plans for patients withclear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injury Recording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in State of North Carolina is required.CPR and first aid certification required Who We Are:BreakThrough Physical Therapy is a member of the Confluent Health family of outpatient physical and occupational therapy companies that is transforming healthcare by developing and educating today’s highly effective clinicians and by providing them with career development pathways to become industry leaders.BreakThroughPhysical Therapyis a member of the Confluent Health family of physical and occupational therapy companies. Together, we are transforming healthcare by strengthening private practices and developing highly effective clinicians all acrossthe country. Confluent Healthand BreakThroughPhysical Therapy providesequal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Confluent Health and BreakThroughPhysical Therapy complies withapplicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Experienced and newly graduated Physical Therapists Apply Today!EOE#CH500

Overview: The Registered Nurse (RN) delivers high-quality patient care and ensures positive patient outcomes through the compassionate and efficient application of nursing knowledge. Working under general supervision, this role promotes professional nursing practice by coordinating patient care through the nursing process and multidisciplinary collaboration.Talent Pool: Nursing Responsibilities: Reviews patient needs and conditions to deliver nursing care in assigned unit to ensure that every patient receives the direct and proper care needed.Analyzes patient information, including medical history, diagnostic results, and current condition, to develop individualized nursing care plans.Prepares nursing processes, such as medication administration and treatments to provide comprehensive and effective patient care.Reconciles medical records to ensure accuracy and compliance with regulatory standards and organizational policies.Evaluates patient response to interventions and identifies any additional interventions needed to meet defined goals of care.Collaborates with interdisciplinary care team to ensure effective care planning.Performs other duties as assigned. Qualifications: EDUCATION:Required: Associate's Degree in NursingPreferred: Bachelor's Degree in NursingEXPERIENCE:Required: 1 year as a Registered NursePreferred: 1 year in a clinical specialty as defined by ANCC or national nursing organizationsLICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:Registered Nurse license in North Carolina or a Compact stateBLS (CPR)-American Red Cross or AHA Healthcare Provider

Overview: The Registered Nurse (RN) delivers high-quality patient care and ensures positive patient outcomes through the compassionate and efficient application of nursing knowledge. Working under general supervision, this role promotes professional nursing practice by coordinating patient care through the nursing process and multidisciplinary collaboration. Responsibilities: Reviews patient needs and conditions to deliver nursing care in assigned unit to ensure that every patient receives the direct and proper care needed.Analyzes patient information, including medical history, diagnostic results, and current condition, to develop individualized nursing care plans.Prepares nursing processes, such as medication administration and treatments to provide comprehensive and effective patient care.Reconciles medical records to ensure accuracy and compliance with regulatory standards and organizational policies.Evaluates patient response to interventions and identifies any additional interventions needed to meet defined goals of care.Collaborates with interdisciplinary care team to ensure effective care planning.Performs other duties as assigned. Qualifications: EDUCATION:Required: Associate's Degree in NursingPreferred: Bachelor's Degree in NursingEXPERIENCE:Required: 1 year as a Registered NursePreferred: 1 year in a clinical specialty as defined by ANCC or national nursing organizationsLICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:Registered Nurse license in North Carolina or a Compact stateBLS (CPR)-American Red Cross or AHA Healthcare Provider

Overview: The Registered Nurse (RN) delivers high-quality patient care and ensures positive patient outcomes through the compassionate and efficient application of nursing knowledge. Working under general supervision, this role promotes professional nursing practice by coordinating patient care through the nursing process and multidisciplinary collaboration. Responsibilities: Reviews patient needs and conditions to deliver nursing care in assigned unit to ensure that every patient receives the direct and proper care needed.Analyzes patient information, including medical history, diagnostic results, and current condition, to develop individualized nursing care plans.Prepares nursing processes, such as medication administration and treatments to provide comprehensive and effective patient care.Reconciles medical records to ensure accuracy and compliance with regulatory standards and organizational policies.Evaluates patient response to interventions and identifies any additional interventions needed to meet defined goals of care.Collaborates with interdisciplinary care team to ensure effective care planning.Performs other duties as assigned. Qualifications: EDUCATION:Required: Associate's Degree in NursingPreferred: Bachelor's Degree in NursingEXPERIENCE:Required: 1 year as a Registered NursePreferred: 1 year in a clinical specialty as defined by ANCC or national nursing organizationsLICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:Registered Nurse license in North Carolina or a Compact stateBLS (CPR)-American Red Cross or AHA Healthcare Provider

Overview: Come join our Annie Penn Rehab team to experience a variety of patient care, all in one place. We have 8 PT’s and 2 PTA’s, as well was OT’s and SLP’s that treat across the lifespan. We are located in the heart of Reidsville in a convenient location and less than a 30-minute drive from Greensboro. Our therapists qualify for “rural” pay – an additional $2.50/hour. We treat patients one-on-one for 45 minute sessions.This is a salaried position with competitive benefits including paid time off, medical, dental, vision, 403B, free Employee Assistance program, paid parental leave, paid education days, and more. This position will provide care to our pediatric clients.The Physical Therapist I evaluates patients conditions, develops personalized treatment plans, and implements therapeutic interventions to optimize functional abilities. This role works closely with patients, guiding them through exercises and techniques to improve mobility, strength, and flexibility. This role also educates patients on injury prevention, provides pain management strategies, and monitors progress throughout the treatment process. The Physical Therapist I monitors and evaluates outcomes related to the assessment and plan of care. This position requires guidance and mentoring for completion of the essential job functions. Responsibilities: Supports evaluations of patients' physical abilities, medical history, and functional limitations to develop individualized treatment plans.Administers therapeutic exercises and other physical therapy interventions to improve patients' strength, flexibility, and range of motion.Educates patients and their families on treatment plans, home exercises, and self-management techniques to improve recovery outcomes.Collaborates with others in developing and implementing discharge plans and recommendations for continued care.Monitors and documents patients' progress, treatment outcomes, and responses to interventions so that treatment plans can be adjusted as needed.Collaborates on teams from different departments to ensure coordinated patient care and holistic treatment outcomes.Performs other duties as reasonably required or assigned. Qualifications: EDUCATION:Required: Bachelor's degree in Physical TherapyEXPERIENCE:LICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:North Carolina license by the NCPT Board of Physical Therapy ExaminersBLS (CPR)-American Red Cross or AHA Healthcare Provider

Overview: The Registered Nurse (RN) delivers high-quality patient care and ensures positive patient outcomes through the compassionate and efficient application of nursing knowledge. Working under general supervision, this role promotes professional nursing practice by coordinating patient care through the nursing process and multidisciplinary collaboration.Talent Pool: NursingTalent Pool: Nursing Responsibilities: Reviews patient needs and conditions to deliver nursing care in assigned unit to ensure that every patient receives the direct and proper care needed.Analyzes patient information, including medical history, diagnostic results, and current condition, to develop individualized nursing care plans.Prepares nursing processes, such as medication administration and treatments to provide comprehensive and effective patient care.Reconciles medical records to ensure accuracy and compliance with regulatory standards and organizational policies.Evaluates patient response to interventions and identifies any additional interventions needed to meet defined goals of care.Collaborates with interdisciplinary care team to ensure effective care planning.Performs other duties as assigned. Qualifications: EDUCATION:Required: Associate's Degree in NursingPreferred: Bachelor's Degree in NursingEXPERIENCE:Required: 1 year as a Registered NursePreferred: 1 year in a clinical specialty as defined by ANCC or national nursing organizationsLICENSURE/CERTIFICATION/REGISTRY/LISTING:Required:Registered Nurse license in North Carolina or a Compact stateBLS (CPR)-American Red Cross or AHA Healthcare Provider